diff options
| -rw-r--r-- | arch/arm/mach-s3c/Kconfig | 12 | ||||
| -rw-r--r-- | arch/arm/mach-s3c/devs.c | 77 | ||||
| -rw-r--r-- | arch/arm/mach-s3c/mach-crag6410-module.c | 13 | ||||
| -rw-r--r-- | arch/arm/mach-s3c/mach-crag6410.c | 13 | ||||
| -rw-r--r-- | arch/arm/mach-s3c/setup-spi-s3c64xx.c | 9 | ||||
| -rw-r--r-- | arch/arm/mach-s3c/spi-core-s3c24xx.h | 6 | ||||
| -rw-r--r-- | drivers/spi/spi-s3c24xx.c | 47 | ||||
| -rw-r--r-- | drivers/spi/spi-s3c64xx.c | 53 | ||||
| -rw-r--r-- | include/linux/platform_data/spi-s3c64xx.h | 14 | ||||
| -rw-r--r-- | include/linux/spi/s3c24xx.h | 5 |
10 files changed, 31 insertions, 218 deletions
diff --git a/arch/arm/mach-s3c/Kconfig b/arch/arm/mach-s3c/Kconfig index 25606e668cf9..1899fc3f44fd 100644 --- a/arch/arm/mach-s3c/Kconfig +++ b/arch/arm/mach-s3c/Kconfig @@ -191,18 +191,6 @@ config S3C64XX_DEV_SPI0 Compile in platform device definitions for S3C64XX's type SPI controller 0 -config S3C64XX_DEV_SPI1 - bool - help - Compile in platform device definitions for S3C64XX's type - SPI controller 1 - -config S3C64XX_DEV_SPI2 - bool - help - Compile in platform device definitions for S3C64XX's type - SPI controller 2 - config SAMSUNG_DEV_TS bool help diff --git a/arch/arm/mach-s3c/devs.c b/arch/arm/mach-s3c/devs.c index 06dec64848f9..1e266fc24f9b 100644 --- a/arch/arm/mach-s3c/devs.c +++ b/arch/arm/mach-s3c/devs.c @@ -1107,8 +1107,7 @@ struct platform_device s3c64xx_device_spi0 = { }, }; -void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, - int num_cs) +void __init s3c64xx_spi0_set_platdata(int src_clk_nr, int num_cs) { struct s3c64xx_spi_info pd; @@ -1120,80 +1119,8 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; - pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio; + pd.cfg_gpio = s3c64xx_spi0_cfg_gpio; s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0); } #endif /* CONFIG_S3C64XX_DEV_SPI0 */ - -#ifdef CONFIG_S3C64XX_DEV_SPI1 -static struct resource s3c64xx_spi1_resource[] = { - [0] = DEFINE_RES_MEM(S3C_PA_SPI1, SZ_256), - [1] = DEFINE_RES_IRQ(IRQ_SPI1), -}; - -struct platform_device s3c64xx_device_spi1 = { - .name = "s3c6410-spi", - .id = 1, - .num_resources = ARRAY_SIZE(s3c64xx_spi1_resource), - .resource = s3c64xx_spi1_resource, - .dev = { - .dma_mask = &samsung_device_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, - int num_cs) -{ - struct s3c64xx_spi_info pd; - - /* Reject invalid configuration */ - if (!num_cs || src_clk_nr < 0) { - pr_err("%s: Invalid SPI configuration\n", __func__); - return; - } - - pd.num_cs = num_cs; - pd.src_clk_nr = src_clk_nr; - pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio; - - s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1); -} -#endif /* CONFIG_S3C64XX_DEV_SPI1 */ - -#ifdef CONFIG_S3C64XX_DEV_SPI2 -static struct resource s3c64xx_spi2_resource[] = { - [0] = DEFINE_RES_MEM(S3C_PA_SPI2, SZ_256), - [1] = DEFINE_RES_IRQ(IRQ_SPI2), -}; - -struct platform_device s3c64xx_device_spi2 = { - .name = "s3c6410-spi", - .id = 2, - .num_resources = ARRAY_SIZE(s3c64xx_spi2_resource), - .resource = s3c64xx_spi2_resource, - .dev = { - .dma_mask = &samsung_device_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, - int num_cs) -{ - struct s3c64xx_spi_info pd; - - /* Reject invalid configuration */ - if (!num_cs || src_clk_nr < 0) { - pr_err("%s: Invalid SPI configuration\n", __func__); - return; - } - - pd.num_cs = num_cs; - pd.src_clk_nr = src_clk_nr; - pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio; - - s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi2); -} -#endif /* CONFIG_S3C64XX_DEV_SPI2 */ diff --git a/arch/arm/mach-s3c/mach-crag6410-module.c b/arch/arm/mach-s3c/mach-crag6410-module.c index 407ad493493e..5d1d4b67a4b7 100644 --- a/arch/arm/mach-s3c/mach-crag6410-module.c +++ b/arch/arm/mach-s3c/mach-crag6410-module.c @@ -32,10 +32,6 @@ #include "crag6410.h" -static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = { - .line = S3C64XX_GPC(3), -}; - static struct wm0010_pdata wm0010_pdata = { .gpio_reset = S3C64XX_GPN(6), .reset_active_high = 1, /* Active high for Glenfarclas Rev 2 */ @@ -49,7 +45,6 @@ static struct spi_board_info wm1253_devs[] = { .chip_select = 0, .mode = SPI_MODE_0, .irq = S3C_EINT(4), - .controller_data = &wm0010_spi_csinfo, .platform_data = &wm0010_pdata, }, }; @@ -62,7 +57,6 @@ static struct spi_board_info balblair_devs[] = { .chip_select = 0, .mode = SPI_MODE_0, .irq = S3C_EINT(4), - .controller_data = &wm0010_spi_csinfo, .platform_data = &wm0010_pdata, }, }; @@ -229,10 +223,6 @@ static struct arizona_pdata wm5102_reva_pdata = { }, }; -static struct s3c64xx_spi_csinfo codec_spi_csinfo = { - .line = S3C64XX_GPN(5), -}; - static struct spi_board_info wm5102_reva_spi_devs[] = { [0] = { .modalias = "wm5102", @@ -242,7 +232,6 @@ static struct spi_board_info wm5102_reva_spi_devs[] = { .mode = SPI_MODE_0, .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, - .controller_data = &codec_spi_csinfo, .platform_data = &wm5102_reva_pdata, }, }; @@ -275,7 +264,6 @@ static struct spi_board_info wm5102_spi_devs[] = { .mode = SPI_MODE_0, .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, - .controller_data = &codec_spi_csinfo, .platform_data = &wm5102_pdata, }, }; @@ -298,7 +286,6 @@ static struct spi_board_info wm5110_spi_devs[] = { .mode = SPI_MODE_0, .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, - .controller_data = &codec_spi_csinfo, .platform_data = &wm5102_reva_pdata, }, }; diff --git a/arch/arm/mach-s3c/mach-crag6410.c b/arch/arm/mach-s3c/mach-crag6410.c index 4a12c75d407f..e3e0fe897bcc 100644 --- a/arch/arm/mach-s3c/mach-crag6410.c +++ b/arch/arm/mach-s3c/mach-crag6410.c @@ -825,6 +825,15 @@ static const struct gpio_led_platform_data gpio_leds_pdata = { static struct dwc2_hsotg_plat crag6410_hsotg_pdata; +static struct gpiod_lookup_table crag_spi0_gpiod_table = { + .dev_id = "s3c6410-spi.0", + .table = { + GPIO_LOOKUP_IDX("GPIOC", 3, "cs", 0, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("GPION", 5, "cs", 1, GPIO_ACTIVE_LOW), + { }, + }, +}; + static void __init crag6410_machine_init(void) { /* Open drain IRQs need pullups */ @@ -856,7 +865,9 @@ static void __init crag6410_machine_init(void) i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); samsung_keypad_set_platdata(&crag6410_keypad_data); - s3c64xx_spi0_set_platdata(NULL, 0, 2); + + gpiod_add_lookup_table(&crag_spi0_gpiod_table); + s3c64xx_spi0_set_platdata(0, 2); pwm_add_table(crag6410_pwm_lookup, ARRAY_SIZE(crag6410_pwm_lookup)); platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices)); diff --git a/arch/arm/mach-s3c/setup-spi-s3c64xx.c b/arch/arm/mach-s3c/setup-spi-s3c64xx.c index efcf78d41585..497aff71c29c 100644 --- a/arch/arm/mach-s3c/setup-spi-s3c64xx.c +++ b/arch/arm/mach-s3c/setup-spi-s3c64xx.c @@ -16,12 +16,3 @@ int s3c64xx_spi0_cfg_gpio(void) return 0; } #endif - -#ifdef CONFIG_S3C64XX_DEV_SPI1 -int s3c64xx_spi1_cfg_gpio(void) -{ - s3c_gpio_cfgall_range(S3C64XX_GPC(4), 3, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - return 0; -} -#endif diff --git a/arch/arm/mach-s3c/spi-core-s3c24xx.h b/arch/arm/mach-s3c/spi-core-s3c24xx.h index 057667469cc3..919c5fd0c9af 100644 --- a/arch/arm/mach-s3c/spi-core-s3c24xx.h +++ b/arch/arm/mach-s3c/spi-core-s3c24xx.h @@ -16,12 +16,6 @@ static inline void s3c24xx_spi_setname(char *name) #ifdef CONFIG_S3C64XX_DEV_SPI0 s3c64xx_device_spi0.name = name; #endif -#ifdef CONFIG_S3C64XX_DEV_SPI1 - s3c64xx_device_spi1.name = name; -#endif -#ifdef CONFIG_S3C64XX_DEV_SPI2 - s3c64xx_device_spi2.name = name; -#endif } #endif /* __PLAT_S3C_SPI_CORE_S3C24XX_H */ diff --git a/drivers/spi/spi-s3c24xx.c b/drivers/spi/spi-s3c24xx.c index d6f51695ca5b..660aa866af06 100644 --- a/drivers/spi/spi-s3c24xx.c +++ b/drivers/spi/spi-s3c24xx.c @@ -12,7 +12,6 @@ #include <linux/err.h> #include <linux/clk.h> #include <linux/platform_device.h> -#include <linux/gpio.h> #include <linux/io.h> #include <linux/slab.h> @@ -62,9 +61,6 @@ struct s3c24xx_spi { unsigned char fiq_inuse; unsigned char fiq_claimed; - void (*set_cs)(struct s3c2410_spi_info *spi, - int cs, int pol); - /* data buffers */ const unsigned char *tx; unsigned char *rx; @@ -84,29 +80,21 @@ static inline struct s3c24xx_spi *to_hw(struct spi_device *sdev) return spi_master_get_devdata(sdev->master); } -static void s3c24xx_spi_gpiocs(struct s3c2410_spi_info *spi, int cs, int pol) -{ - gpio_set_value(spi->pin_cs, pol); -} - static void s3c24xx_spi_chipsel(struct spi_device *spi, int value) { struct s3c24xx_spi_devstate *cs = spi->controller_state; struct s3c24xx_spi *hw = to_hw(spi); - unsigned int cspol = spi->mode & SPI_CS_HIGH ? 1 : 0; /* change the chipselect state and the state of the spi engine clock */ switch (value) { case BITBANG_CS_INACTIVE: - hw->set_cs(hw->pdata, spi->chip_select, cspol^1); writeb(cs->spcon, hw->regs + S3C2410_SPCON); break; case BITBANG_CS_ACTIVE: writeb(cs->spcon | S3C2410_SPCON_ENSCK, hw->regs + S3C2410_SPCON); - hw->set_cs(hw->pdata, spi->chip_select, cspol); break; } } @@ -452,14 +440,6 @@ static void s3c24xx_spi_initialsetup(struct s3c24xx_spi *hw) writeb(0xff, hw->regs + S3C2410_SPPRE); writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN); writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON); - - if (hw->pdata) { - if (hw->set_cs == s3c24xx_spi_gpiocs) - gpio_direction_output(hw->pdata->pin_cs, 1); - - if (hw->pdata->gpio_setup) - hw->pdata->gpio_setup(hw->pdata, 1); - } } static int s3c24xx_spi_probe(struct platform_device *pdev) @@ -502,6 +482,9 @@ static int s3c24xx_spi_probe(struct platform_device *pdev) master->num_chipselect = hw->pdata->num_cs; master->bus_num = pdata->bus_num; master->bits_per_word_mask = SPI_BPW_MASK(8); + /* we need to call the local chipselect callback */ + master->flags = SPI_MASTER_GPIO_SS; + master->use_gpio_descriptors = true; /* setup the state for the bitbang driver */ @@ -541,27 +524,6 @@ static int s3c24xx_spi_probe(struct platform_device *pdev) goto err_no_pdata; } - /* setup any gpio we can */ - - if (!pdata->set_cs) { - if (pdata->pin_cs < 0) { - dev_err(&pdev->dev, "No chipselect pin\n"); - err = -EINVAL; - goto err_register; - } - - err = devm_gpio_request(&pdev->dev, pdata->pin_cs, - dev_name(&pdev->dev)); - if (err) { - dev_err(&pdev->dev, "Failed to get gpio for cs\n"); - goto err_register; - } - - hw->set_cs = s3c24xx_spi_gpiocs; - gpio_direction_output(pdata->pin_cs, 1); - } else - hw->set_cs = pdata->set_cs; - s3c24xx_spi_initialsetup(hw); /* register our spi controller */ @@ -604,9 +566,6 @@ static int s3c24xx_spi_suspend(struct device *dev) if (ret) return ret; - if (hw->pdata && hw->pdata->gpio_setup) - hw->pdata->gpio_setup(hw->pdata, 0); - clk_disable(hw->clk); return 0; } diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 8755cd85e83c..3e42cdb19d27 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -13,10 +13,8 @@ #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/spi/spi.h> -#include <linux/gpio.h> #include <linux/of.h> #include <linux/of_device.h> -#include <linux/of_gpio.h> #include <linux/platform_data/spi-s3c64xx.h> @@ -656,7 +654,11 @@ static int s3c64xx_spi_prepare_message(struct spi_master *master, struct s3c64xx_spi_csinfo *cs = spi->controller_data; /* Configure feedback delay */ - writel(cs->fb_delay & 0x3, sdd->regs + S3C64XX_SPI_FB_CLK); + if (!cs) + /* No delay if not defined */ + writel(0, sdd->regs + S3C64XX_SPI_FB_CLK); + else + writel(cs->fb_delay & 0x3, sdd->regs + S3C64XX_SPI_FB_CLK); return 0; } @@ -830,34 +832,16 @@ static int s3c64xx_spi_setup(struct spi_device *spi) if (spi->dev.of_node) { cs = s3c64xx_get_slave_ctrldata(spi); spi->controller_data = cs; - } else if (cs) { - /* On non-DT platforms the SPI core will set spi->cs_gpio - * to -ENOENT. The GPIO pin used to drive the chip select - * is defined by using platform data so spi->cs_gpio value - * has to be override to have the proper GPIO pin number. - */ - spi->cs_gpio = cs->line; } - if (IS_ERR_OR_NULL(cs)) { + /* NULL is fine, we just avoid using the FB delay (=0) */ + if (IS_ERR(cs)) { dev_err(&spi->dev, "No CS for SPI(%d)\n", spi->chip_select); return -ENODEV; } - if (!spi_get_ctldata(spi)) { - if (gpio_is_valid(spi->cs_gpio)) { - err = gpio_request_one(spi->cs_gpio, GPIOF_OUT_INIT_HIGH, - dev_name(&spi->dev)); - if (err) { - dev_err(&spi->dev, - "Failed to get /CS gpio [%d]: %d\n", - spi->cs_gpio, err); - goto err_gpio_req; - } - } - + if (!spi_get_ctldata(spi)) spi_set_ctldata(spi, cs); - } pm_runtime_get_sync(&sdd->pdev->dev); @@ -909,11 +893,9 @@ setup_exit: /* setup() returns with device de-selected */ s3c64xx_spi_set_cs(spi, false); - if (gpio_is_valid(spi->cs_gpio)) - gpio_free(spi->cs_gpio); spi_set_ctldata(spi, NULL); -err_gpio_req: + /* This was dynamically allocated on the DT path */ if (spi->dev.of_node) kfree(cs); @@ -924,19 +906,9 @@ static void s3c64xx_spi_cleanup(struct spi_device *spi) { struct s3c64xx_spi_csinfo *cs = spi_get_ctldata(spi); - if (gpio_is_valid(spi->cs_gpio)) { - gpio_free(spi->cs_gpio); - if (spi->dev.of_node) - kfree(cs); - else { - /* On non-DT platforms, the SPI core sets - * spi->cs_gpio to -ENOENT and .setup() - * overrides it with the GPIO pin value - * passed using platform data. - */ - spi->cs_gpio = -ENOENT; - } - } + /* This was dynamically allocated on the DT path */ + if (spi->dev.of_node) + kfree(cs); spi_set_ctldata(spi, NULL); } @@ -1131,6 +1103,7 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) master->prepare_message = s3c64xx_spi_prepare_message; master->transfer_one = s3c64xx_spi_transfer_one; master->num_chipselect = sci->num_cs; + master->use_gpio_descriptors = true; master->dma_alignment = 8; master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(16) | SPI_BPW_MASK(8); diff --git a/include/linux/platform_data/spi-s3c64xx.h b/include/linux/platform_data/spi-s3c64xx.h index 773daf7915a3..5df1ace6d2c9 100644 --- a/include/linux/platform_data/spi-s3c64xx.h +++ b/include/linux/platform_data/spi-s3c64xx.h @@ -16,7 +16,6 @@ struct platform_device; * struct s3c64xx_spi_csinfo - ChipSelect description * @fb_delay: Slave specific feedback delay. * Refer to FB_CLK_SEL register definition in SPI chapter. - * @line: Custom 'identity' of the CS line. * * This is per SPI-Slave Chipselect information. * Allocate and initialize one in machine init code and make the @@ -24,7 +23,6 @@ struct platform_device; */ struct s3c64xx_spi_csinfo { u8 fb_delay; - unsigned line; }; /** @@ -43,26 +41,16 @@ struct s3c64xx_spi_info { /** * s3c64xx_spi_set_platdata - SPI Controller configure callback by the board * initialization code. - * @cfg_gpio: Pointer to gpio setup function. * @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks. * @num_cs: Number of elements in the 'cs' array. * * Call this from machine init code for each SPI Controller that * has some chips attached to it. */ -extern void s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, - int num_cs); -extern void s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, - int num_cs); -extern void s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, - int num_cs); +extern void s3c64xx_spi0_set_platdata(int src_clk_nr, int num_cs); /* defined by architecture to configure gpio */ extern int s3c64xx_spi0_cfg_gpio(void); -extern int s3c64xx_spi1_cfg_gpio(void); -extern int s3c64xx_spi2_cfg_gpio(void); extern struct s3c64xx_spi_info s3c64xx_spi0_pdata; -extern struct s3c64xx_spi_info s3c64xx_spi1_pdata; -extern struct s3c64xx_spi_info s3c64xx_spi2_pdata; #endif /*__SPI_S3C64XX_H */ diff --git a/include/linux/spi/s3c24xx.h b/include/linux/spi/s3c24xx.h index 440a71593162..9b8bb22d5b0c 100644 --- a/include/linux/spi/s3c24xx.h +++ b/include/linux/spi/s3c24xx.h @@ -10,14 +10,9 @@ #define __LINUX_SPI_S3C24XX_H __FILE__ struct s3c2410_spi_info { - int pin_cs; /* simple gpio cs */ unsigned int num_cs; /* total chipselects */ int bus_num; /* bus number to use. */ - unsigned int use_fiq:1; /* use fiq */ - - void (*gpio_setup)(struct s3c2410_spi_info *spi, int enable); - void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol); }; extern int s3c24xx_set_fiq(unsigned int irq, u32 *ack_ptr, bool on); |
