| Age | Commit message (Collapse) | Author |
|---|
|
Using RTEXT_FILTER_SKIP_STATS is incorrectly skipping non-stats IPv6
netlink attributes on link dump. This causes issues on userspace tools,
e.g iproute2 is not rendering address generation mode as it should due
to missing netlink attribute.
Move the filling of IFLA_INET6_STATS and IFLA_INET6_ICMP6STATS to a
helper function guarded by a flag check to avoid hitting the same
situation in the future.
Fixes: d5566fd72ec1 ("rtnetlink: RTEXT_FILTER_SKIP_STATS support to avoid dumping inet/inet6 stats")
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250402121751.3108-1-ffmancera@riseup.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When queue is being reset, callbacks of mgmt_ops are called by
netdev_nl_bind_rx_doit().
The netdev_nl_bind_rx_doit() first acquires netdev_lock() and then calls
callbacks.
So, mgmt_ops callbacks should not acquire netdev_lock() internaly.
The bnxt_queue_{start | stop}() calls napi_{enable | disable}() but they
internally acquire netdev_lock().
So, deadlock occurs.
To avoid deadlock, napi_{enable | disable}_locked() should be used
instead.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Fixes: cae03e5bdd9e ("net: hold netdev instance lock during queue operations")
Link: https://patch.msgid.link/20250402133123.840173-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
self-connect-ipv6 got slightly flaky on netdev:
> # timeout set to 120
> # selftests: net/tcp_ao: self-connect_ipv6
> # 1..5
> # # 708[lib/setup.c:250] rand seed 1742872572
> # TAP version 13
> # # 708[lib/proc.c:213] Snmp6 Ip6OutNoRoutes: 0 => 1
> # not ok 1 # error 708[self-connect.c:70] failed to connect()
> # ok 2 No unexpected trace events during the test run
> # # Planned tests != run tests (5 != 2)
> # # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:1
> ok 1 selftests: net/tcp_ao: self-connect_ipv6
I can not reproduce it on my machines, but judging by "Ip6OutNoRoutes"
there is no route to the local_addr (::1).
Looking at the kernel code, I see that kernel does add link-local
address automatically in init_loopback(), but that is called from
ipv6 notifier block. So, in turn the userspace that brought up
the loopback interface may see rtnetlink ACK earlier than
addrconf_notify() does it's job (at least, on a slow VM such as netdev).
Probably, for ipv4 it's the same, judging by inetdev_event().
The fix is quite simple: set the link-local route straight after
bringing the loopback interface. That will make it synchronous.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20250402-tcp-ao-selfconnect-flake-v1-1-8388d629ef3d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since cited commit, ef100_probe_main() and hence also
ef100_check_design_params() run before efx->net_dev is created;
consequently, we cannot netif_set_tso_max_size() or _segs() at this
point.
Move those netif calls to ef100_probe_netdev(), and also replace
netif_err within the design params code with pci_err.
Reported-by: Kyungwook Boo <bookyungwook@gmail.com>
Fixes: 98ff4c7c8ac7 ("sfc: Separate netdev probe/remove from PCI probe/remove")
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250401225439.2401047-1-edward.cree@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the tx tail is less than the head (in cases of wraparound), the TX
consumed descriptor statistic in DQ will be reported as
UINT32_MAX - head + tail, which is incorrect. Mask the difference of
head and tail according to the ring size when reporting the statistic.
Cc: stable@vger.kernel.org
Fixes: 2c9198356d56 ("gve: Add consumed counts to ethtool stats")
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250402001037.2717315-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull ARM and clkdev updates from Russell King:
- Simplify ARM_MMU_KEEP usage
- Add Rust support for ARM architecture version 7
- Align IPIs reported in /proc/interrupts
- require linker to support KEEP within OVERLAY
- add KEEP() for ARM vectors
- add __printf() attribute for clkdev functions
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9445/1: clkdev: Mark some functions with __printf() attribute
ARM: 9444/1: add KEEP() keyword to ARM_VECTORS
ARM: 9443/1: Require linker to support KEEP within OVERLAY for DCE
ARM: 9442/1: smp: Fix IPI alignment in /proc/interrupts
ARM: 9441/1: rust: Enable Rust support for ARMv7
ARM: 9439/1: arm32: simplify ARM_MMU_KEEP usage
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix max_pfn calculation when hotplugging memory so that it never
decreases
- Fix dereference of unused source register in the MOPS SET operation
fault handling
- Fix NULL calling in do_compat_alignment_fixup() when the 32-bit user
space does an unaligned LDREX/STREX
- Add the HiSilicon HIP09 processor to the Spectre-BHB affected CPUs
- Drop unused code pud accessors (special/mkspecial)
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Don't call NULL in do_compat_alignment_fixup()
arm64: Add support for HIP09 Spectre-BHB mitigation
arm64: mm: Drop dead code for pud special bit handling
arm64: mops: Do not dereference src reg for a set operation
arm64: mm: Correct the update of max_pfn
|
|
Pull bpf fixes from Alexei Starovoitov:
- Fix BPF selftests expectations of assembler output and struct layout
(Song Liu and Yonghong Song)
- Fix XSK error code when queue is full (Wang Liang)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Fix verifier_private_stack test failure
selftests/bpf: Fix verifier_bpf_fastcall test
selftests/bpf: Fix tests after fields reorder in struct file
xsk: Fix __xsk_generic_xmit() error code when cq is full
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more non-MM updates from Andrew Morton:
"One bugfix and a couple of small late-arriving updates"
* tag 'mm-nonmm-stable-2025-04-02-22-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
lib: scatterlist: fix sg_split_phys to preserve original scatterlist offsets
lib/sort.c: add _nonatomic() variants with cond_resched()
mailmap: add an entry for Nicolas Schier
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- The series "mm: fixes for fallouts from mem_init() cleanup" from Mike
Rapoport fixes a couple of issues with the just-merged "arch, mm:
reduce code duplication in mem_init()" series
- The series "MAINTAINERS: add my isub-entries to MM part." from Mike
Rapoport does some maintenance on MAINTAINERS
- The series "remove tlb_remove_page_ptdesc()" from Qi Zheng does some
cleanup work to the page mapping code
- The series "mseal system mappings" from Jeff Xu permits sealing of
"system mappings", such as vdso, vvar, vvar_vclock, vectors (arm
compat-mode), sigpage (arm compat-mode)
- Plus the usual shower of singleton patches
* tag 'mm-stable-2025-04-02-22-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
mseal sysmap: add arch-support txt
mseal sysmap: enable s390
selftest: test system mappings are sealed
mseal sysmap: update mseal.rst
mseal sysmap: uprobe mapping
mseal sysmap: enable arm64
mseal sysmap: enable x86-64
mseal sysmap: generic vdso vvar mapping
selftests: x86: test_mremap_vdso: skip if vdso is msealed
mseal sysmap: kernel config and header change
mm: pgtable: remove tlb_remove_page_ptdesc()
x86: pgtable: convert to use tlb_remove_ptdesc()
riscv: pgtable: unconditionally use tlb_remove_ptdesc()
mm: pgtable: convert some architectures to use tlb_remove_ptdesc()
mm: pgtable: change pt parameter of tlb_remove_ptdesc() to struct ptdesc*
mm: pgtable: make generic tlb_remove_table() use struct ptdesc
microblaze/mm: put mm_cmdline_setup() in .init.text section
mm/memory_hotplug: fix call folio_test_large with tail page in do_migrate_range
MAINTAINERS: mm: add entry for secretmem
MAINTAINERS: mm: add entry for numa memblocks and numa emulation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM hotfixes from Andrew Morton:
"Five hotfixes. Three are cc:stable and the remainder address post-6.14
issues or aren't considered necessary for -stable kernels.
All patches are for MM"
* tag 'mm-hotfixes-stable-2025-04-02-21-57' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: zswap: fix crypto_free_acomp() deadlock in zswap_cpu_comp_dead()
mm/hugetlb: move hugetlb_sysctl_init() to the __init section
mm: page_isolation: avoid calling folio_hstate() without hugetlb_lock
mm/hugetlb_vmemmap: fix memory loads ordering
mm/userfaultfd: fix release hang over concurrent GUP
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Calling scx_bpf_create_dsq() with the same ID would succeed creating
duplicate DSQs. Fix it to return -EEXIST.
- scx_select_cpu_dfl() fixes and cleanups.
- Synchronize tool/sched_ext with external scheduler repo. While this
isn't a fix. There's no risk to the kernel and it's better if they
stay synced closer.
* tag 'sched_ext-for-6.15-rc0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
tools/sched_ext: Sync with scx repo
sched_ext: initialize built-in idle state before ops.init()
sched_ext: create_dsq: Return -EEXIST on duplicate request
sched_ext: Remove a meaningless conditional goto in scx_select_cpu_dfl()
sched_ext: idle: Fix return code of scx_select_cpu_dfl()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix build error when CONFIG_PROBE_EVENTS_BTF_ARGS is not enabled
The tracing of arguments in the function tracer depends on some
functions that are only defined when PROBE_EVENTS_BTF_ARGS is
enabled. In fact, PROBE_EVENTS_BTF_ARGS also depends on all the same
configs as the function argument tracing requires. Just have the
function argument tracing depend on PROBE_EVENTS_BTF_ARGS.
- Free module_delta for persistent ring buffer instance
When an instance holds the persistent ring buffer, it allocates a
helper array to hold the deltas between where modules are loaded on
the last boot and the current boot. This array needs to be freed when
the instance is freed.
- Add cond_resched() to loop in ftrace_graph_set_hash()
The hash functions in ftrace loop over every function that can be
enabled by ftrace. This can be 50,000 functions or more. This loop is
known to trigger soft lockup warnings and requires a cond_resched().
The loop in ftrace_graph_set_hash() was missing it.
- Fix the event format verifier to include "%*p.." arguments
To prevent events from dereferencing stale pointers that can happen
if a trace event uses a dereferece pointer to something that was not
copied into the ring buffer and can be freed by the time the trace is
read, a verifier is called. At boot or module load, the verifier
scans the print format string for pointers that can be dereferenced
and it checks the arguments to make sure they do not contain
something that can be freed. The "%*p" was not handled, which would
add another argument and cause the verifier to not only not verify
this pointer, but it will look at the wrong argument for every
pointer after that.
- Fix mcount sorttable building for different endian type target
When modifying the ELF file to sort the mcount_loc table in the
sorttable.c code, the endianess of the file and the host is used to
determine if the bytes need to be swapped when calculations are done.
A change was made to the sorting of the mcount_loc that read the
values from the ELF file into an array and the swap happened on the
filling of the array. But one of the calculations of the array still
did the swap when it did not need to. This caused building on a
little endian machine for a big endian target to not find the mcount
function in the 'nm' table and it zeroed it out, causing there to be
no functions available to trace.
- Add goto out_unlock jump to rv_register_monitor() on error path
One of the error paths in rv_register_monitor() just returned the
error when it should have jumped to the out_unlock label to release
the mutex.
* tag 'trace-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix missing unlock on double nested monitors return path
scripts/sorttable: Fix endianness handling in build-time mcount sort
tracing: Verify event formats that have "%*p.."
ftrace: Add cond_resched() to ftrace_graph_set_hash()
tracing: Free module_delta on freeing of persistent ring buffer
ftrace: Have tracing function args depend on PROBE_EVENTS_BTF_ARGS
|
|
If we crash when the journal pin fifo is completely full - i.e. we're
at the maximum number of dirty journal entries - that may put us in a
sticky situation in recovery, as journal replay will need to be able to
open new journal entries in order to get going.
bch2_fs_journal_start() already had provisions for resizing the journal
pin fifo if needed, but it needs a fudge factor to ensure there's room
for journal replay.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
peek_slot() doesn't normally return bkey_s_c_null - except when we ask
for a key at a btree level that doesn't exist, which can happen here.
We might want to revisit this, but we'll have to look over all the
places where we use peek_slot() on interior nodes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_backpointer_get_key() returns bkey_s_c_null when the target isn't
found.
backpointer_get_key() flags the error, so there's nothing else to do
here - just skip it and move on.
Link: https://github.com/koverstreet/bcachefs/issues/847
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Codepaths that create entries in the snapshots btree currently call
bch2_mark_snapshot(), which updates the in-memory snapshot table, before
transaction commit.
This is because bch2_mark_snapshot() is an atomic trigger, run with
btree write locks held, and isn't allowed to fail - but it might need to
reallocate the table, hence we call it early when we're still allowed to
fail.
This is generally harmless - if we fail, we'll have left an entry in the
snapshots table around, but nothing will reference it and it'll get
overwritten if reused by another transaction.
But check_snapshot_exists(), which reconstructs snapshots when the
snapshots btree has been corrupted or lost, was erronously rechecking if
the snapshot exists inside the transaction commit loop - so on
transaction restart (in this case mem_realloced), the second iteration
would return without repairing.
This code needs some cleanup: splitting out a "maybe realloc snapshots
table" helper would have avoided this, that will be in the next patch.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The inconsistency error path calls print_string_as_lines, which calls
console_lock, which is a potentially-sleeping function and so can't be
called in an atomic context.
Replace calls to it with the nonblocking variant which is safe to call.
Signed-off-by: Bharadwaj Raju <bharadwaj.raju777@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Two fixes from the recent logging changes:
bch2_inconsistent(), bch2_fs_inconsistent() be called from interrupt
context, or with rcu_read_lock() held.
The one syzbot found is in
bch2_bkey_pick_read_device
bch2_dev_rcu
bch2_fs_inconsistent
We're starting to switch to lift the printbufs up to higher levels so we
can emit better log messages and print them all in one go (avoid
garbling), so that conversion will help with spotting these in the
future; when we declare a printbuf it must be flagged if we're in an
atomic context.
Secondly, in btree_node_write_endio:
00085 BUG: sleeping function called from invalid context at include/linux/sched/mm.h:321
00085 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 618, name: bch-reclaim/fa6
00085 preempt_count: 10001, expected: 0
00085 RCU nest depth: 0, expected: 0
00085 4 locks held by bch-reclaim/fa6/618:
00085 #0: ffffff80d7ccad68 (&j->reclaim_lock){+.+.}-{4:4}, at: bch2_journal_reclaim_thread+0x84/0x198
00085 #1: ffffff80d7c84218 (&c->btree_trans_barrier){.+.+}-{0:0}, at: __bch2_trans_get+0x1c0/0x440
00085 #2: ffffff80cd3f8140 (bcachefs_btree){+.+.}-{0:0}, at: __bch2_trans_get+0x22c/0x440
00085 #3: ffffff80c3823c20 (&vblk->vqs[i].lock){-.-.}-{3:3}, at: virtblk_done+0x58/0x130
00085 irq event stamp: 328
00085 hardirqs last enabled at (327): [<ffffffc080073a14>] finish_task_switch.isra.0+0xbc/0x2a0
00085 hardirqs last disabled at (328): [<ffffffc080971a10>] el1_interrupt+0x20/0x60
00085 softirqs last enabled at (0): [<ffffffc08002f920>] copy_process+0x7c8/0x2118
00085 softirqs last disabled at (0): [<0000000000000000>] 0x0
00085 Preemption disabled at:
00085 [<ffffffc08003ada0>] irq_enter_rcu+0x18/0x90
00085 CPU: 8 UID: 0 PID: 618 Comm: bch-reclaim/fa6 Not tainted 6.14.0-rc6-ktest-g04630bde23e8 #18798
00085 Hardware name: linux,dummy-virt (DT)
00085 Call trace:
00085 show_stack+0x1c/0x30 (C)
00085 dump_stack_lvl+0x84/0xc0
00085 dump_stack+0x14/0x20
00085 __might_resched+0x180/0x288
00085 __might_sleep+0x4c/0x88
00085 __kmalloc_node_track_caller_noprof+0x34c/0x3e0
00085 krealloc_noprof+0x1a0/0x2d8
00085 bch2_printbuf_make_room+0x9c/0x120
00085 bch2_prt_printf+0x60/0x1b8
00085 btree_node_write_endio+0x1b0/0x2d8
00085 bio_endio+0x138/0x1f0
00085 btree_node_write_endio+0xe8/0x2d8
00085 bio_endio+0x138/0x1f0
00085 blk_update_request+0x220/0x4c0
00085 blk_mq_end_request+0x28/0x148
00085 virtblk_request_done+0x64/0xe8
00085 blk_mq_complete_request+0x34/0x40
00085 virtblk_done+0x78/0x130
00085 vring_interrupt+0x6c/0xb0
00085 __handle_irq_event_percpu+0x8c/0x2e0
00085 handle_irq_event+0x50/0xb0
00085 handle_fasteoi_irq+0xc4/0x250
00085 handle_irq_desc+0x44/0x60
00085 generic_handle_domain_irq+0x20/0x30
00085 gic_handle_irq+0x54/0xc8
00085 call_on_irq_stack+0x24/0x40
Reported-by: syzbot+c82cd2906e2f192410bb@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
In attempt_compress(), the return value of zlib_deflateInit2() needs to be
checked. A proper implementation can be found in pstore_compress().
Add an error check and return 0 immediately if the initialzation fails.
Fixes: 986e9842fb68 ("bcachefs: Compression levels")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux into for-next
riscv patches for 6.15-rc1, part 2
* A bunch of fixes:
- 2 fixes in the purgatory code which prevented kexec to work
- Workaround an issue with gcc-15
* tag 'riscv-mw2-6.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux:
riscv: Add norvc after .option arch in runtime const
riscv: Make sure toolchain supports zba before using zba instructions
riscv/purgatory: 4B align purgatory_start
riscv/kexec_file: Handle R_RISCV_64 in purgatory relocator
selftests: riscv: fix v_exec_initval_nolibc.c
riscv: Fix hugetlb retrieval of number of ptes in case of !present pte
riscv: print hartid on bringup
dt-bindings: riscv: document vector crypto requirements
dt-bindings: riscv: add vector sub-extension dependencies
dt-bindings: riscv: d requires f
RISC-V: add f & d extension validation checks
RISC-V: add vector crypto extension validation checks
RISC-V: add vector extension validation checks
|
|
->elevator_lock depends on queue freeze lock, see block/blk-sysfs.c.
queue freeze lock depends on fs_reclaim.
So don't grab elevator lock during queue initialization which needs to
call kmalloc(GFP_KERNEL), and we can cut the dependency between
->elevator_lock and fs_reclaim, then the lockdep warning can be killed.
This way is safe because elevator setting isn't ready to run during
queue initialization.
There isn't such issue in __blk_mq_update_nr_hw_queues() because
memalloc_noio_save() is called before acquiring elevator lock.
Fixes the following lockdep warning:
https://lore.kernel.org/linux-block/67e6b425.050a0220.2f068f.007b.GAE@google.com/
Reported-by: syzbot+4c7e0f9b94ad65811efb@syzkaller.appspotmail.com
Cc: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250403105402.1334206-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_uring always switches requests to atomic refcounting for iowq
execution before there is any parallilism by setting REQ_F_REFCOUNT,
and the flag is not cleared until the request completes. That should be
fine as long as the compiler doesn't make up a non existing value for
the flags, however KCSAN still complains when the request owner changes
oter flag bits:
BUG: KCSAN: data-race in io_req_task_cancel / io_wq_free_work
...
read to 0xffff888117207448 of 8 bytes by task 3871 on cpu 0:
req_ref_put_and_test io_uring/refs.h:22 [inline]
Skip REQ_F_REFCOUNT checks for iowq, we know it's set.
Reported-by: syzbot+903a2ad71fb3f1e47cf5@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d880bc27fb8c3209b54641be4ff6ac02b0e5789a.1743679736.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When handling multiple NFTA_TUNNEL_KEY_OPTS_GENEVE attributes, the
parsing logic should place every geneve_opt structure one by one
compactly. Hence, when deciding the next geneve_opt position, the
pointer addition should be in units of char *.
However, the current implementation erroneously does type conversion
before the addition, which will lead to heap out-of-bounds write.
[ 6.989857] ==================================================================
[ 6.990293] BUG: KASAN: slab-out-of-bounds in nft_tunnel_obj_init+0x977/0xa70
[ 6.990725] Write of size 124 at addr ffff888005f18974 by task poc/178
[ 6.991162]
[ 6.991259] CPU: 0 PID: 178 Comm: poc-oob-write Not tainted 6.1.132 #1
[ 6.991655] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[ 6.992281] Call Trace:
[ 6.992423] <TASK>
[ 6.992586] dump_stack_lvl+0x44/0x5c
[ 6.992801] print_report+0x184/0x4be
[ 6.993790] kasan_report+0xc5/0x100
[ 6.994252] kasan_check_range+0xf3/0x1a0
[ 6.994486] memcpy+0x38/0x60
[ 6.994692] nft_tunnel_obj_init+0x977/0xa70
[ 6.995677] nft_obj_init+0x10c/0x1b0
[ 6.995891] nf_tables_newobj+0x585/0x950
[ 6.996922] nfnetlink_rcv_batch+0xdf9/0x1020
[ 6.998997] nfnetlink_rcv+0x1df/0x220
[ 6.999537] netlink_unicast+0x395/0x530
[ 7.000771] netlink_sendmsg+0x3d0/0x6d0
[ 7.001462] __sock_sendmsg+0x99/0xa0
[ 7.001707] ____sys_sendmsg+0x409/0x450
[ 7.002391] ___sys_sendmsg+0xfd/0x170
[ 7.003145] __sys_sendmsg+0xea/0x170
[ 7.004359] do_syscall_64+0x5e/0x90
[ 7.005817] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 7.006127] RIP: 0033:0x7ec756d4e407
[ 7.006339] Code: 48 89 fa 4c 89 df e8 38 aa 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 faf
[ 7.007364] RSP: 002b:00007ffed5d46760 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
[ 7.007827] RAX: ffffffffffffffda RBX: 00007ec756cc4740 RCX: 00007ec756d4e407
[ 7.008223] RDX: 0000000000000000 RSI: 00007ffed5d467f0 RDI: 0000000000000003
[ 7.008620] RBP: 00007ffed5d468a0 R08: 0000000000000000 R09: 0000000000000000
[ 7.009039] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000
[ 7.009429] R13: 00007ffed5d478b0 R14: 00007ec756ee5000 R15: 00005cbd4e655cb8
Fix this bug with correct pointer addition and conversion in parse
and dump code.
Fixes: 925d844696d9 ("netfilter: nft_tunnel: add support for geneve opts")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Eliminate a useless task_work on execve by moving the call to
rseq_set_notify_resume() from sched_mm_cid_after_execve() to the error
path of bprm_execve().
The call to rseq_set_notify_resume() from sched_mm_cid_after_execve() is
pointless in the success case, because rseq_execve() will clear the rseq
pointer before returning to userspace.
sched_mm_cid_after_execve() is called from both the success and error
paths of bprm_execve(). The call to rseq_set_notify_resume() is needed
on error because the mm_cid may have changed.
Also move the rseq_execve() to right after sched_mm_cid_after_execve()
in bprm_execve().
[ mingo: Merged to a recent upstream kernel, extended the changelog. ]
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250327132945.1558783-1-mathieu.desnoyers@efficios.com
|
|
kernel/sched/isolation.c obviously makes no sense without CONFIG_SMP, but
the Kconfig entry we have right now:
config CPU_ISOLATION
bool "CPU isolation"
depends on SMP || COMPILE_TEST
allows the creation of pointless .config's which cause
build failures.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250330134955.GA7910@redhat.com
Closes: https://lore.kernel.org/oe-kbuild-all/202503260646.lrUqD3j5-lkp@intel.com/
|
|
Upstream fix ac888d58869b ("net: do not delay dst_entries_add() in
dst_release()") moved decrementing the dst count from dst_destroy to
dst_release to avoid accessing already freed data in case of netns
dismantle. However in case CONFIG_DST_CACHE is enabled and OvS+tunnels
are used, this fix is incomplete as the same issue will be seen for
cached dsts:
Unable to handle kernel paging request at virtual address ffff5aabf6b5c000
Call trace:
percpu_counter_add_batch+0x3c/0x160 (P)
dst_release+0xec/0x108
dst_cache_destroy+0x68/0xd8
dst_destroy+0x13c/0x168
dst_destroy_rcu+0x1c/0xb0
rcu_do_batch+0x18c/0x7d0
rcu_core+0x174/0x378
rcu_core_si+0x18/0x30
Fix this by invalidating the cache, and thus decrementing cached dst
counters, in dst_release too.
Fixes: d71785ffc7e7 ("net: add dst_cache to ovs vxlan lwtunnel")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20250326173634.31096-1-atenart@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In the EIP93 HASH functions, the eip93_put_descriptor is called without
acquiring lock. This is problematic when multiple thread execute hash
operations.
Correctly acquire ring write lock on calling eip93_put_descriptor to
prevent concurrent access and mess with the ring pointers.
Fixes: 9739f5f93b78 ("crypto: eip93 - Add Inside Secure SafeXcel EIP-93 crypto engine support")
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.15-2025-03-27:
amdgpu:
- Guard against potential division by 0 in fan code
- Zero RPM support for SMU 14.0.2
- Properly handle SI and CIK support being disabled
- PSR fixes
- DML2 fixes
- DP Link training fix
- Vblank fixes
- RAS fixes
- Partitioning fix
- SDMA fix
- SMU 13.0.x fixes
- Rom fetching fix
- MES fixes
- Queue reset fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250328004749.3392457-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
- Fix NULL pointer dereference on error path
- Add missing HW workaround for BMG
- Fix survivability mode not triggering
- Fix build warning when DRM_FBDEV_EMULATION is not set
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/vxy5kwdkzgp2u2umnyxv4ygslmdlvzjl22xotzxaw55dv7plpz@34miqxkbvggu
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
drm/i915 fixes for v6.15 merge window:
- Bounds check for scalers in DSC prefill latency computation
- Fix build by adding a missing include
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/878qota36x.fsf@intel.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
Short summary of fixes pull:
adp:
- Fix error handling in plane setup
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250327141835.GA96037@linux.fritz.box
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire update from Takashi Sakamoto:
"A single commit to use the common helper function for on-stack
trailing array to enqueue any isochronous packet by the requests
from userspace applications"
* tag 'firewire-updates-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: avoid -Wflex-array-member-not-at-end warning
|
|
Several verifier_private_stack tests failed with latest bpf-next.
For example, for 'Private stack, single prog' subtest, the
jitted code:
func #0:
0: f3 0f 1e fa endbr64
4: 0f 1f 44 00 00 nopl (%rax,%rax)
9: 0f 1f 00 nopl (%rax)
c: 55 pushq %rbp
d: 48 89 e5 movq %rsp, %rbp
10: f3 0f 1e fa endbr64
14: 49 b9 58 74 8a 8f 7d 60 00 00 movabsq $0x607d8f8a7458, %r9
1e: 65 4c 03 0c 25 28 c0 48 87 addq %gs:-0x78b73fd8, %r9
27: bf 2a 00 00 00 movl $0x2a, %edi
2c: 49 89 b9 00 ff ff ff movq %rdi, -0x100(%r9)
33: 31 c0 xorl %eax, %eax
35: c9 leave
36: e9 20 5d 0f e1 jmp 0xffffffffe10f5d5b
The insn 'addq %gs:-0x78b73fd8, %r9' does not match the expected
regex 'addq %gs:0x{{.*}}, %r9' and this caused test failure.
Fix it by changing '%gs:0x{{.*}}' to '%gs:{{.*}}' to accommodate the
possible negative offset. A few other subtests are fixed in a similar way.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250331033828.365077-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Commit [1] moves percpu data on x86 from address 0x000... to address
0xfff...
Before [1]:
159020: 0000000000030700 0 OBJECT GLOBAL DEFAULT 23 pcpu_hot
After [1]:
152602: ffffffff83a3e034 4 OBJECT GLOBAL DEFAULT 35 pcpu_hot
As a result, verifier_bpf_fastcall tests should now expect a negative
value for pcpu_hot, IOW, the disassemble should show "r=" instead of
"w=".
Fix this in the test.
Note that, a later change created a new variable "cpu_number" for
bpf_get_smp_processor_id() [2]. The inlining logic is updated properly
as part of this change, so there is no need to fix anything on the
kernel side.
[1] commit 9d7de2aa8b41 ("x86/percpu/64: Use relative percpu offsets")
[2] commit 01c7bc5198e9 ("x86/smp: Move cpu number to percpu hot section")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250328193124.808784-1-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The change in struct file [1] moved f_ref to the 3rd cache line.
It made *(u64 *)file dereference invalid from the verifier point of view,
because btf_struct_walk() walks into f_lock field, which is 4-byte long.
Fix the selftests to deference the file pointer as a 4-byte access.
[1] commit e249056c91a2 ("fs: place f_ref to 3rd cache line in struct file to resolve false sharing")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250327185528.1740787-1-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When the cq reservation is failed, the error code is not set which is
initialized to zero in __xsk_generic_xmit(). That means the packet is not
send successfully but sendto() return ok.
Considering the impact on uapi, return -EAGAIN is a good idea. The cq is
full usually because it is not released in time, try to send msg again is
appropriate.
The bug was at the very early implementation of xsk, so the Fixes tag
targets the commit that introduced the changes in
xsk_cq_reserve_addr_locked where this fix depends on.
Fixes: e6c4047f5122 ("xsk: Use xsk_buff_pool directly for cq functions")
Suggested-by: Magnus Karlsson <magnus.karlsson@gmail.com>
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250227081052.4096337-1-wangliang74@huawei.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- dm-crypt: switch to using the crc32 library
- dm-verity, dm-integrity, dm-crypt: documentation improvement
- dm-vdo fixes
- dm-stripe: enable inline crypto passthrough
- dm-integrity: set ti->error on memory allocation failure
- dm-bufio: remove unused return value
- dm-verity: do forward error correction on metadata I/O errors
- dm: fix unconditional IO throttle caused by REQ_PREFLUSH
- dm cache: prevent BUG_ON by blocking retries on failed device resumes
- dm cache: support shrinking the origin device
- dm: restrict dm device size to 2^63-512 bytes
- dm-delay: support zoned devices
- dm-verity: support block number limits for different ioprio classes
- dm-integrity: fix non-constant-time tag verification (security bug)
- dm-verity, dm-ebs: fix prefetch-vs-suspend race
* tag 'for-6.15/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (27 commits)
dm-ebs: fix prefetch-vs-suspend race
dm-verity: fix prefetch-vs-suspend race
dm-integrity: fix non-constant-time tag verification
dm-verity: support block number limits for different ioprio classes
dm-delay: support zoned devices
dm: restrict dm device size to 2^63-512 bytes
dm cache: support shrinking the origin device
dm cache: prevent BUG_ON by blocking retries on failed device resumes
dm vdo indexer: reorder uds_request to reduce padding
dm: fix unconditional IO throttle caused by REQ_PREFLUSH
dm vdo: rework processing of loaded refcount byte arrays
dm vdo: remove remaining ring references
dm-verity: do forward error correction on metadata I/O errors
dm-bufio: remove unused return value
dm-integrity: set ti->error on memory allocation failure
dm: Enable inline crypto passthrough for striped target
dm vdo slab-depot: read refcount blocks in large chunks at load time
dm vdo vio-pool: allow variable-sized metadata vios
dm vdo vio-pool: support pools with multiple data blocks per vio
dm vdo vio-pool: add a pool pointer to pooled_vio
...
|
|
A quick fix for what I assume is a typo.
Signed-off-by: Tingmao Wang <m@maowtm.org>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Message-ID: <20250330213443.98434-1-m@maowtm.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Ira Weiny:
"Most of the code changes are to remove dead code.
The bug fixes are minor, Syzkaller and one for broken devices which
are unlikely to be in the field. So no need to backport them.
- two patches to remove dead code: nd_attach_ndns() and
nd_region_conflict() have not been used since 2017 and 2019
respectively
- Fix divide-by-0 if device returns a broken LSA value
- Fix Syzkaller reported bug"
* tag 'libnvdimm-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm/labels: Fix divide error in nd_label_data_init()
libnvdimm: Remove unused nd_attach_ndns
libnvdimm: Remove unused nd_region_conflict
acpi: nfit: fix narrowing conversion in acpi_nfit_ctl
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dave Jiang:
- Add support for Global Persistent Flush (GPF)
- Cleanup of DPA partition metadata handling:
- Remove the CXL_DECODER_MIXED enum that's not needed anymore
- Introduce helpers to access resource and perf meta data
- Introduce 'struct cxl_dpa_partition' and 'struct cxl_range_info'
- Make cxl_dpa_alloc() DPA partition number agnostic
- Remove cxl_decoder_mode
- Cleanup partition size and perf helpers
- Remove unused CXL partition values
- Add logging support for CXL CPER endpoint and port protocol errors:
- Prefix protocol error struct and function names with cxl_
- Move protocol error definitions and structures to a common location
- Remove drivers/firmware/efi/cper_cxl.h to include/linux/cper.h
- Add support in GHES to process CXL CPER protocol errors
- Process CXL CPER protocol errors
- Add trace logging for CXL PCIe port RAS errors
- Remove redundant gp_port init
- Add validation of cxl device serial number
- CXL ABI documentation updates/fixups
- A series that uses guard() to clean up open coded mutex lockings and
remove gotos for error handling.
- Some followup patches to support dirty shutdown accounting:
- Add helper to retrieve DVSEC offset for dirty shutdown registers
- Rename cxl_get_dirty_shutdown() to cxl_arm_dirty_shutdown()
- Add support for dirty shutdown count via sysfs
- cxl_test support for dirty shutdown
- A series to support CXL mailbox Features commands.
Mostly in preparation for CXL EDAC code to utilize the Features
commands. It's also in preparation for CXL fwctl support to utilize
the CXL Features. The commands include "Get Supported Features", "Get
Feature", and "Set Feature".
- A series to support extended linear cache support described by the
ACPI HMAT table.
The addition helps enumerate the cache and also provides additional
RAS reporting support for configuration with extended linear cache.
(and related fixes for the series).
- An update to cxl_test to support a 3-way capable CFMWS
- A documentation fix to remove unused "mixed mode"
* tag 'cxl-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (39 commits)
cxl/region: Fix the first aliased address miscalculation
cxl/region: Quiet some dev_warn()s in extended linear cache setup
cxl/Documentation: Remove 'mixed' from sysfs mode doc
cxl: Fix warning from emitting resource_size_t as long long int on 32bit systems
cxl/test: Define a CFMWS capable of a 3 way HB interleave
cxl/mem: Do not return error if CONFIG_CXL_MCE unset
tools/testing/cxl: Set Shutdown State support
cxl/pmem: Export dirty shutdown count via sysfs
cxl/pmem: Rename cxl_dirty_shutdown_state()
cxl/pci: Introduce cxl_gpf_get_dvsec()
cxl/pci: Support Global Persistent Flush (GPF)
cxl: Document missing sysfs files
cxl: Plug typos in ABI doc
cxl/pmem: debug invalid serial number data
cxl/cdat: Remove redundant gp_port initialization
cxl/memdev: Remove unused partition values
cxl/region: Drop goto pattern of construct_region()
cxl/region: Drop goto pattern in cxl_dax_region_alloc()
cxl/core: Use guard() to drop goto pattern of cxl_dpa_alloc()
cxl/core: Use guard() to drop the goto pattern of cxl_dpa_free()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
6.15-rc1. Included in here are:
- Thunderbolt driver and core api updates for new hardware and
features
- usb-storage const array cleanups
- typec driver updates
- dwc3 driver updates
- xhci driver updates and bugfixes
- small USB documentation updates
- usb cdns3 driver updates
- usb gadget driver updates
- other small driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (92 commits)
thunderbolt: Do not add non-active NVM if NVM upgrade is disabled for retimer
thunderbolt: Scan retimers after device router has been enumerated
usb: host: cdns3: forward lost power information to xhci
usb: host: xhci-plat: allow upper layers to signal power loss
usb: xhci: change xhci_resume() parameters to explicit the desired info
usb: cdns3-ti: run HW init at resume() if HW was reset
usb: cdns3-ti: move reg writes to separate function
usb: cdns3: call cdns_power_is_lost() only once in cdns_resume()
usb: cdns3: rename hibernated argument of role->resume() to lost_power
usb: xhci: tegra: rename `runtime` boolean to `is_auto_runtime`
usb: host: xhci-plat: mvebu: use ->quirks instead of ->init_quirk() func
usb: dwc3: Don't use %pK through printk
usb: core: Don't use %pK through printk
usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev()
dt-bindings: usb: qcom,dwc3: Synchronize minItems for interrupts and -names
usb: common: usb-conn-gpio: switch psy_cfg from of_node to fwnode
usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running
usb: xhci: Don't change the status of stalled TDs on failed Stop EP
xhci: Avoid queuing redundant Stop Endpoint command for stalled endpoint
xhci: Handle spurious events on Etron host isoc enpoints
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of serial and tty driver updates for 6.15-rc1.
Include in here are the following:
- more great tty layer cleanups from Jiri. Someday this will be done,
but that's not going to be any year soon...
- kdb debug driver reverts to fix a reported issue
- lots of .dts binding updates for different devices with serial
devices
- lots of tiny updates and tweaks and a few bugfixes for different
serial drivers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
tty: serial: fsl_lpuart: Fix unused variable 'sport' build warning
serial: stm32: do not deassert RS485 RTS GPIO prematurely
serial: 8250: add driver for NI UARTs
dt-bindings: serial: snps-dw-apb-uart: document RZ/N1 binding without DMA
serial: icom: fix code format problems
serial: sh-sci: Save and restore more registers
tty: serial: pl011: remove incorrect of_match_ptr annotation
dt-bindings: serial: snps-dw-apb-uart: Add support for rk3562
tty: serial: lpuart: only disable CTS instead of overwriting the whole UARTMODIR register
tty: caif: removed unused function debugfs_tx()
serial: 8250_dma: terminate correct DMA in tx_dma_flush()
tty: serial: fsl_lpuart: rename register variables more specifically
tty: serial: fsl_lpuart: use port struct directly to simply code
tty: serial: fsl_lpuart: Use u32 and u8 for register variables
tty: serial: fsl_lpuart: disable transmitter before changing RS485 related registers
tty: serial: 8250: Add Brainboxes XC devices
dt-bindings: serial: fsl-lpuart: support i.MX94
tty: serial: 8250: Add some more device IDs
dt-bindings: serial: samsung: add exynos7870-uart compatible
serial: 8250_dw: Comment possible corner cases in serial_out() implementation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver cleanups and updates for
6.15-rc1.
As expected, with the introduction of the gpib drivers, loads of
cleanups and fixes showed up, with the huge majority of changes being
for that chunk of drivers. This is good and shows that the community
can fix up things in public when asked to. Also included in here are:
- small sm750fb cleanups
- tiny rtl8723bs cleanups
- more vchiq_arm cleanups and changes, hopefully this will get out of
staging soon
All of these have been in linux-next for almost 2 weeks now with no
reported issues"
* tag 'staging-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (76 commits)
staging: rtl8723bs: fixed a unnecessary parentheses coding style issue
staging: vchiq_arm: Improve initial VCHIQ connect
staging: vchiq_arm: Create keep-alive thread during probe
staging: vchiq_arm: Stop kthreads if vchiq cdev register fails
staging: vchiq_arm: Fix possible NPR of keep-alive thread
staging: vchiq_arm: Register debugfs after cdev
staging: vchiq_arm: Don't use %pK through printk
staging: rtl8723bs: select CONFIG_CRYPTO_LIB_AES
staging: rtl8723bs: Remove some unused functions, macros, and structs
staging: gpib: change return type of t1_delay function to report errors
staging: gpib: remove commented-out lines
staging: gpib: fix kernel-doc section for usb_gpib_line_status() function
staging: gpib: fix kernel-doc section for function usb_gpib_interface_clear()
staging: gpib: fix kernel-doc section for write_loop() function
staging: gpib: Removing typedef for gpib_board
staging: gpib: struct typing for gpib_gboard_t
staging: gpib: tnt4882: struct gpib_board
staging: gpib: tms9914: struct gpib_board
staging: gpib: pc2: struct gpib_board
staging: gpib: ni_usb_gpib: struct gpib_board
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are two counter driver fixes that I realized I never sent to you
for 6.14-final.
They have been in my for weeks, as well as linux-next, my fault for
not sending them earlier. They are:
- bugfix for stm32-lptimer-cnt counter driver
- bugfix for microchip-tcb-capture counter driver
Again, these have been in linux-next for weeks with no reported
issues"
* tag 'char-misc-6.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
counter: microchip-tcb-capture: Fix undefined counter channel state on probe
counter: stm32-lptimer-cnt: fix error handling when enabling
|
|
To 2.52
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This change allows Linux SMB1 client to autoreconnect the share when it is
modified on server by admin operation which removes and re-adds it.
Implementation is reused from SMB2+ is_network_name_deleted callback. There
are just adjusted checks for error codes and access to struct smb_hdr.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The calls to cifs_truncate_page() should be superfluous as the places that
call it also call truncate_setsize() or cifs_setsize() and therefore
truncate_pagecache() which should also clear the tail part of the folio
containing the EOF marker.
Further, smb3_simple_falloc() calls both cifs_setsize() and
truncate_setsize() in addition to cifs_truncate_page().
Remove the superfluous calls.
This gets rid of another function referring to struct page.
[Should cifs_setsize() also set inode->i_blocks?]
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <stfrench@microsoft.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Because skb_tunnel_check_pmtu() doesn't handle PACKET_HOST packets,
commit 30a92c9e3d6b ("openvswitch: Set the skbuff pkt_type for proper
pmtud support.") forced skb->pkt_type to PACKET_OUTGOING for
openvswitch packets that are sent using the OVS_ACTION_ATTR_OUTPUT
action. This allowed such packets to invoke the
iptunnel_pmtud_check_icmp() or iptunnel_pmtud_check_icmpv6() helpers
and thus trigger PMTU update on the input device.
However, this also broke other parts of PMTU discovery. Since these
packets don't have the PACKET_HOST type anymore, they won't trigger the
sending of ICMP Fragmentation Needed or Packet Too Big messages to
remote hosts when oversized (see the skb_in->pkt_type condition in
__icmp_send() for example).
These two skb->pkt_type checks are therefore incompatible as one
requires skb->pkt_type to be PACKET_HOST, while the other requires it
to be anything but PACKET_HOST.
It makes sense to not trigger ICMP messages for non-PACKET_HOST packets
as these messages should be generated only for incoming l2-unicast
packets. However there doesn't seem to be any reason for
skb_tunnel_check_pmtu() to ignore PACKET_HOST packets.
Allow both cases to work by allowing skb_tunnel_check_pmtu() to work on
PACKET_HOST packets and not overriding skb->pkt_type in openvswitch
anymore.
Fixes: 30a92c9e3d6b ("openvswitch: Set the skbuff pkt_type for proper pmtud support.")
Fixes: 4cb47a8644cc ("tunnels: PMTU discovery support for directly bridged IP packets")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Tested-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/eac941652b86fddf8909df9b3bf0d97bc9444793.1743208264.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a peer attempts to establish a connection, vsock_connect() contains
a loop that waits for the state to be TCP_ESTABLISHED. However, the
other peer can be fast enough to accept the connection and close it
immediately, thus moving the state to TCP_CLOSING.
When this happens, the peer in the vsock_connect() is properly woken up,
but since the state is not TCP_ESTABLISHED, it goes back to sleep
until the timeout expires, returning -ETIMEDOUT.
If the socket state is TCP_CLOSING, waiting for the timeout is pointless.
vsock_connect() can return immediately without errors or delay since the
connection actually happened. The socket will be in a closing state,
but this is not an issue, and subsequent calls will fail as expected.
We discovered this issue while developing a test that accepts and
immediately closes connections to stress the transport switch between
two connect() calls, where the first one was interrupted by a signal
(see Closes link).
Reported-by: Luigi Leonardi <leonardi@redhat.com>
Closes: https://lore.kernel.org/virtualization/bq6hxrolno2vmtqwcvb5bljfpb7mvwb3kohrvaed6auz5vxrfv@ijmd2f3grobn/
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Link: https://patch.msgid.link/20250328141528.420719-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
