| Age | Commit message (Collapse) | Author |
|---|
|
'udp-fix-two-integer-overflows-when-sk-sk_rcvbuf-is-close-to-int_max'
Kuniyuki Iwashima says:
====================
udp: Fix two integer overflows when sk->sk_rcvbuf is close to INT_MAX.
I got a report that UDP mem usage in /proc/net/sockstat did not
drop even after an application was terminated.
The issue could happen if sk->sk_rmem_alloc wraps around due
to a large sk->sk_rcvbuf, which was INT_MAX in our case.
The patch 2 fixes the issue, and the patch 1 fixes yet another
overflow I found while investigating the issue.
v3: https://lore.kernel.org/20250327202722.63756-1-kuniyu@amazon.com
v2: https://lore.kernel.org/20250325195826.52385-1-kuniyu@amazon.com
v1: https://lore.kernel.org/20250323231016.74813-1-kuniyu@amazon.com
====================
Link: https://patch.msgid.link/20250401184501.67377-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matt Dowling reported a weird UDP memory usage issue.
Under normal operation, the UDP memory usage reported in /proc/net/sockstat
remains close to zero. However, it occasionally spiked to 524,288 pages
and never dropped. Moreover, the value doubled when the application was
terminated. Finally, it caused intermittent packet drops.
We can reproduce the issue with the script below [0]:
1. /proc/net/sockstat reports 0 pages
# cat /proc/net/sockstat | grep UDP:
UDP: inuse 1 mem 0
2. Run the script till the report reaches 524,288
# python3 test.py & sleep 5
# cat /proc/net/sockstat | grep UDP:
UDP: inuse 3 mem 524288 <-- (INT_MAX + 1) >> PAGE_SHIFT
3. Kill the socket and confirm the number never drops
# pkill python3 && sleep 5
# cat /proc/net/sockstat | grep UDP:
UDP: inuse 1 mem 524288
4. (necessary since v6.0) Trigger proto_memory_pcpu_drain()
# python3 test.py & sleep 1 && pkill python3
5. The number doubles
# cat /proc/net/sockstat | grep UDP:
UDP: inuse 1 mem 1048577
The application set INT_MAX to SO_RCVBUF, which triggered an integer
overflow in udp_rmem_release().
When a socket is close()d, udp_destruct_common() purges its receive
queue and sums up skb->truesize in the queue. This total is calculated
and stored in a local unsigned integer variable.
The total size is then passed to udp_rmem_release() to adjust memory
accounting. However, because the function takes a signed integer
argument, the total size can wrap around, causing an overflow.
Then, the released amount is calculated as follows:
1) Add size to sk->sk_forward_alloc.
2) Round down sk->sk_forward_alloc to the nearest lower multiple of
PAGE_SIZE and assign it to amount.
3) Subtract amount from sk->sk_forward_alloc.
4) Pass amount >> PAGE_SHIFT to __sk_mem_reduce_allocated().
When the issue occurred, the total in udp_destruct_common() was 2147484480
(INT_MAX + 833), which was cast to -2147482816 in udp_rmem_release().
At 1) sk->sk_forward_alloc is changed from 3264 to -2147479552, and
2) sets -2147479552 to amount. 3) reverts the wraparound, so we don't
see a warning in inet_sock_destruct(). However, udp_memory_allocated
ends up doubling at 4).
Since commit 3cd3399dd7a8 ("net: implement per-cpu reserves for
memory_allocated"), memory usage no longer doubles immediately after
a socket is close()d because __sk_mem_reduce_allocated() caches the
amount in udp_memory_per_cpu_fw_alloc. However, the next time a UDP
socket receives a packet, the subtraction takes effect, causing UDP
memory usage to double.
This issue makes further memory allocation fail once the socket's
sk->sk_rmem_alloc exceeds net.ipv4.udp_rmem_min, resulting in packet
drops.
To prevent this issue, let's use unsigned int for the calculation and
call sk_forward_alloc_add() only once for the small delta.
Note that first_packet_length() also potentially has the same problem.
[0]:
from socket import *
SO_RCVBUFFORCE = 33
INT_MAX = (2 ** 31) - 1
s = socket(AF_INET, SOCK_DGRAM)
s.bind(('', 0))
s.setsockopt(SOL_SOCKET, SO_RCVBUFFORCE, INT_MAX)
c = socket(AF_INET, SOCK_DGRAM)
c.connect(s.getsockname())
data = b'a' * 100
while True:
c.send(data)
Fixes: f970bd9e3a06 ("udp: implement memory accounting helpers")
Reported-by: Matt Dowling <madowlin@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250401184501.67377-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__udp_enqueue_schedule_skb() has the following condition:
if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf)
goto drop;
sk->sk_rcvbuf is initialised by net.core.rmem_default and later can
be configured by SO_RCVBUF, which is limited by net.core.rmem_max,
or SO_RCVBUFFORCE.
If we set INT_MAX to sk->sk_rcvbuf, the condition is always false
as sk->sk_rmem_alloc is also signed int.
Then, the size of the incoming skb is added to sk->sk_rmem_alloc
unconditionally.
This results in integer overflow (possibly multiple times) on
sk->sk_rmem_alloc and allows a single socket to have skb up to
net.core.udp_mem[1].
For example, if we set a large value to udp_mem[1] and INT_MAX to
sk->sk_rcvbuf and flood packets to the socket, we can see multiple
overflows:
# cat /proc/net/sockstat | grep UDP:
UDP: inuse 3 mem 7956736 <-- (7956736 << 12) bytes > INT_MAX * 15
^- PAGE_SHIFT
# ss -uam
State Recv-Q ...
UNCONN -1757018048 ... <-- flipping the sign repeatedly
skmem:(r2537949248,rb2147483646,t0,tb212992,f1984,w0,o0,bl0,d0)
Previously, we had a boundary check for INT_MAX, which was removed by
commit 6a1f12dd85a8 ("udp: relax atomic operation on sk->sk_rmem_alloc").
A complete fix would be to revert it and cap the right operand by
INT_MAX:
rmem = atomic_add_return(size, &sk->sk_rmem_alloc);
if (rmem > min(size + (unsigned int)sk->sk_rcvbuf, INT_MAX))
goto uncharge_drop;
but we do not want to add the expensive atomic_add_return() back just
for the corner case.
Casting rmem to unsigned int prevents multiple wraparounds, but we still
allow a single wraparound.
# cat /proc/net/sockstat | grep UDP:
UDP: inuse 3 mem 524288 <-- (INT_MAX + 1) >> 12
# ss -uam
State Recv-Q ...
UNCONN -2147482816 ... <-- INT_MAX + 831 bytes
skmem:(r2147484480,rb2147483646,t0,tb212992,f3264,w0,o0,bl0,d14468947)
So, let's define rmem and rcvbuf as unsigned int and check skb->truesize
only when rcvbuf is large enough to lower the overflow possibility.
Note that we still have a small chance to see overflow if multiple skbs
to the same socket are processed on different core at the same time and
each size does not exceed the limit but the total size does.
Note also that we must ignore skb->truesize for a small buffer as
explained in commit 363dc73acacb ("udp: be less conservative with
sock rmem accounting").
Fixes: 6a1f12dd85a8 ("udp: relax atomic operation on sk->sk_rmem_alloc")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250401184501.67377-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rtnl_net_debug_init() registers rtnl_net_debug_net_ops by
register_pernet_device() but calls unregister_pernet_subsys()
in case register_netdevice_notifier() fails.
It corrupts pernet_list because first_device is updated in
register_pernet_device() but not unregister_pernet_subsys().
Let's fix it by calling register_pernet_subsys() instead.
The _subsys() one fits better for the use case because it keeps
the notifier alive until default_device_exit_net(), giving it
more chance to test NETDEV_UNREGISTER.
Fixes: 03fa53485659 ("rtnetlink: Add ASSERT_RTNL_NET() placeholder for netdev notifier.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250401190716.70437-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull NFS client updates from Trond Myklebust:
"Bugfixes:
- Three fixes for looping in the NFSv4 state manager delegation code
- Fix for the NFSv4 state XDR code (Neil Brown)
- Fix a leaked reference in nfs_lock_and_join_requests()
- Fix a use-after-free in the delegation return code
Features:
- Implement the NFSv4.2 copy offload OFFLOAD_STATUS operation to
allow monitoring of an in-progress copy
- Add a mount option to force NFSv3/NFSv4 to use READDIRPLUS in a
getdents() call
- SUNRPC now allows some basic management of an existing RPC client's
connections using sysfs
- Improvements to the automated teardown of a NFS client when the
container it was initiated from gets killed
- Improvements to prevent tasks from getting stuck in a killable wait
state after calling exit_signals()"
* tag 'nfs-for-6.15-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (29 commits)
nfs: Add missing release on error in nfs_lock_and_join_requests()
NFSv4: Check for delegation validity in nfs_start_delegation_return_locked()
NFS: Don't allow waiting for exiting tasks
SUNRPC: Don't allow waiting for exiting tasks
NFSv4: Treat ENETUNREACH errors as fatal for state recovery
NFSv4: clp->cl_cons_state < 0 signifies an invalid nfs_client
NFSv4: Further cleanups to shutdown loops
NFS: Shut down the nfs_client only after all the superblocks
SUNRPC: rpc_clnt_set_transport() must not change the autobind setting
SUNRPC: rpcbind should never reset the port to the value '0'
pNFS/flexfiles: Report ENETDOWN as a connection error
pNFS/flexfiles: Treat ENETUNREACH errors as fatal in containers
NFS: Treat ENETUNREACH errors as fatal in containers
NFS: Add a mount option to make ENETUNREACH errors fatal
sunrpc: Add a sysfs file for one-step xprt deletion
sunrpc: Add a sysfs file for adding a new xprt
sunrpc: Add a sysfs files for rpc_clnt information
sunrpc: Add a sysfs attr for xprtsec
NFS: Add implid to sysfs
NFS: Extend rdirplus mount option with "force|none"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Allow connection to server to time out (Joanne Koong)
- If server doesn't support creating a hard link, return EPERM rather
than ENOSYS (Matt Johnston)
- Allow file names longer than 1024 chars (Bernd Schubert)
- Fix a possible race if request on io_uring queue is interrupted
(Bernd Schubert)
- Misc fixes and cleanups
* tag 'fuse-update-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: remove unneeded atomic set in uring creation
fuse: fix uring race condition for null dereference of fc
fuse: Increase FUSE_NAME_MAX to PATH_MAX
fuse: Allocate only namelen buf memory in fuse_notify_
fuse: add default_request_timeout and max_request_timeout sysctls
fuse: add kernel-enforced timeout option for requests
fuse: optmize missing FUSE_LINK support
fuse: Return EPERM rather than ENOSYS from link()
fuse: removed unused function fuse_uring_create() from header
fuse: {io-uring} Fix a possible req cancellation race
|
|
In iproute 6.14, the nat ip mask logic was fixed to remove an undefined
behaviour[1]. So now instead of reporting '0.0.0.0/32' on x86 and potentially
'0.0.0.0/0' in other platforms, it reports '0.0.0.0/0' in all platforms.
[1] https://lore.kernel.org/netdev/20250306112520.188728-1-torben.nielsen@prevas.dk/
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://patch.msgid.link/20250401144908.568140-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 updates from Konstantin Komarov:
- Fix integer overflows on 32-bit systems and in hdr_first_de()
- Fix 'proc_info_root' leak on NTFS initialization failure
- Remove unused functions ni_load_attr, ntfs_sb_read, ntfs_flush_inodes
- update inode->i_mapping->a_ops on compression state
- ensure atomicity of write operations
- refactor ntfs_{create/remove}_{procdir,proc_root}()
* tag 'ntfs3_for_6.15' of https://github.com/Paragon-Software-Group/linux-ntfs3:
fs/ntfs3: Remove unused ntfs_flush_inodes
fs/ntfs3: Remove unused ntfs_sb_read
fs/ntfs3: Remove unused ni_load_attr
fs/ntfs3: Prevent integer overflow in hdr_first_de()
fs/ntfs3: Fix a couple integer overflows on 32bit systems
fs/ntfs3: Update inode->i_mapping->a_ops on compression state
fs/ntfs3: Fix WARNING in ntfs_extend_initialized_size
fs/ntfs3: Fix 'proc_info_root' leak when init ntfs failed
fs/ntfs3: Factor out ntfs_{create/remove}_proc_root()
fs/ntfs3: Factor out ntfs_{create/remove}_procdir()
fs/ntfs3: Keep write operations atomic
|
|
Protect the parser TCAM/SRAM memory, and the cached (shadow) SRAM
information, from concurrent modifications.
Both the TCAM and SRAM tables are indirectly accessed by configuring
an index register that selects the row to read or write to. This means
that operations must be atomic in order to, e.g., avoid spreading
writes across multiple rows. Since the shadow SRAM array is used to
find free rows in the hardware table, it must also be protected in
order to avoid TOCTOU errors where multiple cores allocate the same
row.
This issue was detected in a situation where `mvpp2_set_rx_mode()` ran
concurrently on two CPUs. In this particular case the
MVPP2_PE_MAC_UC_PROMISCUOUS entry was corrupted, causing the
classifier unit to drop all incoming unicast - indicated by the
`rx_classifier_drops` counter.
Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250401065855.3113635-1-tobias@waldekranz.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With commit 8533b14b3d65 ("eth: mlx4: create a page pool for Rx") mlx4
started using functions guarded by PAGE_POOL. This change introduced
build errors when CONFIG_MLX4_EN is set but CONFIG_PAGE_POOL is not:
ld: vmlinux.o: in function `mlx4_en_alloc_frags':
en_rx.c:(.text+0xa5eaf9): undefined reference to `page_pool_alloc_pages'
ld: vmlinux.o: in function `mlx4_en_create_rx_ring':
(.text+0xa5ee91): undefined reference to `page_pool_create'
Make MLX4_EN select PAGE_POOL to fix the ml;x4 build errors.
Fixes: 8533b14b3d65 ("eth: mlx4: create a page pool for Rx")
Signed-off-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250401015315.2306092-1-gthelen@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pravin has not been active for a while, missingmaints reports:
Subsystem OPENVSWITCH
Changes 138 / 253 (54%)
(No activity)
Top reviewers:
[41]: aconole@redhat.com
[31]: horms@kernel.org
[23]: echaudro@redhat.com
[8]: fw@strlen.de
[6]: i.maximets@ovn.org
INACTIVE MAINTAINER Pravin B Shelar <pshelar@ovn.org>
Let's elevate Aaron, Eelco and Ilya to the status of maintainers.
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250401001520.2080231-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzkaller points out that create_link path doesn't grab ops lock,
add it.
Reported-by: syzbot+08936936fe8132f91f1a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/67e6b3e8.050a0220.2f068f.0079.GAE@google.com/
Fixes: 97246d6d21c2 ("net: hold netdev instance lock during ndo_bpf")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250331142814.1887506-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ETS Qdisc schedules SP bands in a priority order assigning band-0 the
highest priority (band-0 > band-1 > .. > band-n) while EN7581 arranges
SP bands in a priority order assigning band-7 the highest priority
(band-7 > band-6, .. > band-n).
Fix priomap check in airoha_qdma_set_tx_ets_sched routine in order to
align ETS Qdisc and airoha_eth driver SP priority ordering.
Fixes: b56e4d660a96 ("net: airoha: Enforce ETS Qdisc priomap")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20250331-airoha-ets-validate-priomap-v1-1-60a524488672@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Add a new maintainer for configfs
- Fix exportfs module description
- Place flexible array memeber at the end of an internal struct in the
mount code
- Add new maintainer for netfslib as Jeff Layton is stepping down as
current co-maintainer
- Fix error handling in cachefiles_get_directory()
- Cleanup do_notify_pidfd()
- Fix syscall number definitions in pidfd selftests
- Fix racy usage of fs_struct->in exec during multi-threaded exec
- Ensure correct exit code is reported when pidfs_exit() is called from
release_task() for a delayed thread-group leader exit
- Fix conflicting iomap flag definitions
* tag 'vfs-6.15-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: Fix conflicting values of iomap flags
fs: namespace: Avoid -Wflex-array-member-not-at-end warning
MAINTAINERS: configfs: add Andreas Hindborg as maintainer
exportfs: add module description
exit: fix the usage of delay_group_leader->exit_code in do_notify_parent() and pidfs_exit()
netfs: add Paulo as maintainer and remove myself as Reviewer
cachefiles: Fix oops in vfs_mkdir from cachefiles_get_directory
exec: fix the racy usage of fs_struct->in_exec
selftests/pidfd: fixes syscall number defines
pidfs: cleanup the usage of do_notify_pidfd()
|
|
Fix the following kernel warning deleting HTB offloaded leafs and/or root
HTB qdisc in airoha_eth driver properly reporting qid in
airoha_tc_get_htb_get_leaf_queue routine.
$tc qdisc replace dev eth1 root handle 10: htb offload
$tc class add dev eth1 arent 10: classid 10:4 htb rate 100mbit ceil 100mbit
$tc qdisc replace dev eth1 parent 10:4 handle 4: ets bands 8 \
quanta 1514 3028 4542 6056 7570 9084 10598 12112
$tc qdisc del dev eth1 root
[ 55.827864] ------------[ cut here ]------------
[ 55.832493] WARNING: CPU: 3 PID: 2678 at 0xffffffc0798695a4
[ 55.956510] CPU: 3 PID: 2678 Comm: tc Tainted: G O 6.6.71 #0
[ 55.963557] Hardware name: Airoha AN7581 Evaluation Board (DT)
[ 55.969383] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 55.976344] pc : 0xffffffc0798695a4
[ 55.979851] lr : 0xffffffc079869a20
[ 55.983358] sp : ffffffc0850536a0
[ 55.986665] x29: ffffffc0850536a0 x28: 0000000000000024 x27: 0000000000000001
[ 55.993800] x26: 0000000000000000 x25: ffffff8008b19000 x24: ffffff800222e800
[ 56.000935] x23: 0000000000000001 x22: 0000000000000000 x21: ffffff8008b19000
[ 56.008071] x20: ffffff8002225800 x19: ffffff800379d000 x18: 0000000000000000
[ 56.015206] x17: ffffffbf9ea59000 x16: ffffffc080018000 x15: 0000000000000000
[ 56.022342] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000001
[ 56.029478] x11: ffffffc081471008 x10: ffffffc081575a98 x9 : 0000000000000000
[ 56.036614] x8 : ffffffc08167fd40 x7 : ffffffc08069e104 x6 : ffffff8007f86000
[ 56.043748] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000001
[ 56.050884] x2 : 0000000000000000 x1 : 0000000000000250 x0 : ffffff800222c000
[ 56.058020] Call trace:
[ 56.060459] 0xffffffc0798695a4
[ 56.063618] 0xffffffc079869a20
[ 56.066777] __qdisc_destroy+0x40/0xa0
[ 56.070528] qdisc_put+0x54/0x6c
[ 56.073748] qdisc_graft+0x41c/0x648
[ 56.077324] tc_get_qdisc+0x168/0x2f8
[ 56.080978] rtnetlink_rcv_msg+0x230/0x330
[ 56.085076] netlink_rcv_skb+0x5c/0x128
[ 56.088913] rtnetlink_rcv+0x14/0x1c
[ 56.092490] netlink_unicast+0x1e0/0x2c8
[ 56.096413] netlink_sendmsg+0x198/0x3c8
[ 56.100337] ____sys_sendmsg+0x1c4/0x274
[ 56.104261] ___sys_sendmsg+0x7c/0xc0
[ 56.107924] __sys_sendmsg+0x44/0x98
[ 56.111492] __arm64_sys_sendmsg+0x20/0x28
[ 56.115580] invoke_syscall.constprop.0+0x58/0xfc
[ 56.120285] do_el0_svc+0x3c/0xbc
[ 56.123592] el0_svc+0x18/0x4c
[ 56.126647] el0t_64_sync_handler+0x118/0x124
[ 56.131005] el0t_64_sync+0x150/0x154
[ 56.134660] ---[ end trace 0000000000000000 ]---
Fixes: ef1ca9271313b ("net: airoha: Add sched HTB offload support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250331-airoha-htb-qdisc-offload-del-fix-v1-1-4ea429c2c968@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We must serialize calls to sctp_udp_sock_stop() and sctp_udp_sock_start()
or risk a crash as syzbot reported:
Oops: general protection fault, probably for non-canonical address 0xdffffc000000000d: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f]
CPU: 1 UID: 0 PID: 6551 Comm: syz.1.44 Not tainted 6.14.0-syzkaller-g7f2ff7b62617 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
RIP: 0010:kernel_sock_shutdown+0x47/0x70 net/socket.c:3653
Call Trace:
<TASK>
udp_tunnel_sock_release+0x68/0x80 net/ipv4/udp_tunnel_core.c:181
sctp_udp_sock_stop+0x71/0x160 net/sctp/protocol.c:930
proc_sctp_do_udp_port+0x264/0x450 net/sctp/sysctl.c:553
proc_sys_call_handler+0x3d0/0x5b0 fs/proc/proc_sysctl.c:601
iter_file_splice_write+0x91c/0x1150 fs/splice.c:738
do_splice_from fs/splice.c:935 [inline]
direct_splice_actor+0x18f/0x6c0 fs/splice.c:1158
splice_direct_to_actor+0x342/0xa30 fs/splice.c:1102
do_splice_direct_actor fs/splice.c:1201 [inline]
do_splice_direct+0x174/0x240 fs/splice.c:1227
do_sendfile+0xafd/0xe50 fs/read_write.c:1368
__do_sys_sendfile64 fs/read_write.c:1429 [inline]
__se_sys_sendfile64 fs/read_write.c:1415 [inline]
__x64_sys_sendfile64+0x1d8/0x220 fs/read_write.c:1415
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
Fixes: 046c052b475e ("sctp: enable udp tunneling socks")
Reported-by: syzbot+fae49d997eb56fa7c74d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/67ea5c01.050a0220.1547ec.012b.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20250331091532.224982-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cong Wang says:
====================
net_sched: skbprio: Remove overly strict queue assertions
====================
Link: https://patch.msgid.link/20250329222536.696204-1-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test case to validate the interaction between TBF and SKBPRIO queueing
disciplines, specifically targeting queue length accounting corner cases.
This test complements the fix for the queue length accounting issue in the
SKBPRIO qdisc. This is still best-effort, as timing and manipulating enqueue
and dequeue from user-space is very hard.
Cc: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250329222536.696204-3-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the current implementation, skbprio enqueue/dequeue contains an assertion
that fails under certain conditions when SKBPRIO is used as a child qdisc under
TBF with specific parameters. The failure occurs because TBF sometimes peeks at
packets in the child qdisc without actually dequeuing them when tokens are
unavailable.
This peek operation creates a discrepancy between the parent and child qdisc
queue length counters. When TBF later receives a high-priority packet,
SKBPRIO's queue length may show a different value than what's reflected in its
internal priority queue tracking, triggering the assertion.
The fix removes this overly strict assertions in SKBPRIO, they are not
necessary at all.
Reported-by: syzbot+a3422a19b05ea96bee18@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a3422a19b05ea96bee18
Fixes: aea5f654e6b7 ("net/sched: add skbprio scheduler")
Cc: Nishanth Devarajan <ndev2021@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250329222536.696204-2-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When calling netlbl_conn_setattr(), addr->sa_family is used
to determine the function behavior. If sk is an IPv4 socket,
but the connect function is called with an IPv6 address,
the function calipso_sock_setattr() is triggered.
Inside this function, the following code is executed:
sk_fullsock(__sk) ? inet_sk(__sk)->pinet6 : NULL;
Since sk is an IPv4 socket, pinet6 is NULL, leading to a
null pointer dereference.
This patch fixes the issue by checking if inet6_sk(sk)
returns a NULL pointer before accessing pinet6.
Signed-off-by: Debin Zhu <mowenroot@163.com>
Signed-off-by: Bitao Ouyang <1985755126@qq.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Fixes: ceba1832b1b2 ("calipso: Set the calipso socket label to match the secattr.")
Link: https://patch.msgid.link/20250401124018.4763-1-mowenroot@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Prevent cpufreq_update_limits() from crashing the kernel due to a NULL
pointer dereference when it is called before registering a cpufreq
driver, for instance as a result of a notification triggered by the
platform firmware (Rafael Wysocki)"
* tag 'pm-6.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Reference count policy in cpufreq_update_limits()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These are fixes and cleanups on top of the previous ACPI material for
6.15-rc1 merged recently:
- Extend the Lenovo Yoga Tab 3 ACPI quirk to skip GPIO event-handlers
along with ACPI AC and battery which makes it work with Linux when
started in the Windows mode (Hans de Goede)
- Prevent the ACPI processor idle driver from being used on systems
without _CST and with invalid C2/C3 in FADT in order to restore its
previous (and expected) behavior that has been altered
inadvertently by a recent code change (Giovanni Gherdovich)
- Skip ACPI IRQ override on ASUS Vivobook 14 X1404VAP to make the
internal keyboard work on it (Paul Menzel)
- Make the ACPI backlight driver handle fetching EDID passed as
ACPI_TYPE_PACKAGE which is not specification-compliant, but has
been encountered in the field (Gergo Koteles)
- Simplify the aggregation of choices in the ACPI platform-profile
driver which has been unlocked by recent modifications of that
driver (Kurt Borja)
- Use str_enabled_disabled() instead of hardcoded strings in the ACPI
code related to NUMA (Thorsten Blum)
- Add Intel OC Watchdog device IDs to non-PNP device list to prevent
PNP from claiming the devices that carry these IDs in which case
non-PNP drivers cannot bind to them (Diogo Ivo)"
* tag 'acpi-6.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: video: Handle fetching EDID as ACPI_TYPE_PACKAGE
ACPI: processor: idle: Return an error if both P_LVL{2,3} idle states are invalid
ACPI: platform_profile: Optimize _aggregate_choices()
ACPI: x86: Extend Lenovo Yoga Tab 3 quirk with skip GPIO event-handlers
ACPI: resource: Skip IRQ override on ASUS Vivobook 14 X1404VAP
ACPI: PNP: Add Intel OC Watchdog IDs to non-PNP device list
ACPI: NUMA: Use str_enabled_disabled() helper function
|
|
When nf_tables_updchain encounters an error, hook registration needs to
be rolled back.
This should only be done if the hook has been registered, which won't
happen when the table is flagged as dormant (inactive).
Just move the assignment into the registration block.
Reported-by: syzbot+53ed3a6440173ddbf499@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=53ed3a6440173ddbf499
Fixes: b9703ed44ffb ("netfilter: nf_tables: support for adding new devices to an existing netdev chain")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
conncount has its own GC handler which determines when to reap stale
elements, this is convenient for dynamic sets. However, this also reaps
non-dynamic sets with static configurations coming from control plane.
Always run connlimit gc handler but honor feedback to reap element if
this set is dynamic.
Fixes: 290180e2448c ("netfilter: nf_tables: add connlimit support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
- Remove the IBM CAPI (cxl) driver
Thanks to Andrew Donnellan.
* tag 'powerpc-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
docs: Fix references to IBM CAPI (cxl) removal version
cxl: Remove driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Johannes Berg:
- proper nofault accesses and read-only rodata
- hostfs fix for host inode number reuse
- fixes for host errno handling
- various cleanups/small fixes
* tag 'uml-for-linux-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: Rewrite the sigio workaround based on epoll and tgkill
um: Prohibit the VM_CLONE flag in run_helper_thread()
um: Switch to the pthread-based helper in sigio workaround
um: ubd: Switch to the pthread-based helper
um: Add pthread-based helper support
um: x86: clean up elf specific definitions
um: Store full CSGSFS and SS register from mcontext
um: virt-pci: Refactor virtio_pcidev into its own module
um: work around sched_yield not yielding in time-travel mode
um/locking: Remove semicolon from "lock" prefix
um: Update min_low_pfn to match changes in uml_reserved
um: use str_yes_no() to remove hardcoded "yes" and "no"
um: hostfs: avoid issues on inode number reuse by host
um: Allocate vdso page pointer statically
um: remove copy_from_kernel_nofault_allowed
um: mark rodata read-only and implement _nofault accesses
um: Pass the correct Rust target and options with gcc
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Always select HAVE_VIRT_CPU_ACCOUNTING_GEN
- Enable UBSAN (Undefined Behavior Sanitizer)
- Increase MAX_IO_PICS up to 8
- Increase ARCH_DMA_MINALIGN up to 16
- Fix and improve BPF JIT
- Fix and improve vDSO implementation
- Update the default config file
- Some bug fixes and other small changes
* tag 'loongarch-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Update Loongson-3 default config file
LoongArch: vDSO: Make use of the t8 register for vgetrandom-chacha
LoongArch: vDSO: Remove --hash-style=sysv
LoongArch: BPF: Don't override subprog's return value
LoongArch: BPF: Use move_addr() for BPF_PSEUDO_FUNC
LoongArch: BPF: Fix off-by-one error in build_prologue()
LoongArch: Rework the arch_kgdb_breakpoint() implementation
LoongArch: Fix device node refcount leak in fdt_cpu_clk_init()
LoongArch: Increase ARCH_DMA_MINALIGN up to 16
LoongArch: Increase MAX_IO_PICS up to 8
LoongArch: Fix help text of CMDLINE_EXTEND in Kconfig
LoongArch: Enable UBSAN (Undefined Behavior Sanitizer)
LoongArch: Always select HAVE_VIRT_CPU_ACCOUNTING_GEN
rust: Fix enabling Rust and building with GCC for LoongArch
|
|
Synchronize with https://github.com/sched-ext/scx at dc44584874f0 ("kernel:
Synchronize with kernel tools/sched_ext").
- READ/WRITE_ONCE() is made more proper and READA_ONCE_ARENA() is dropped.
- scale_by_task_weight[_inverse]() helpers added.
- Enum defs expanded to cover more and new enums.
- Don't trigger fatal error when some enums are missing from kernel BTF.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 TDX updates from Dave Hansen:
"Avoid direct HLT instruction execution in TDX guests.
TDX guests aren't expected to use the HLT instruction directly. It
causes a virtualization exception (#VE). While the #VE _can_ be
handled, the current handling is slow and buggy and the easiest thing
is just to avoid HLT in the first place. Plus, the kernel already has
paravirt infrastructure that makes it relatively painless.
Make TDX guests require paravirt and add some TDX-specific paravirt
handlers which avoid HLT in the normal halt routines. Also add a
warning in case another HLT sneaks in.
There was a report that this leads to a "major performance
improvement" on specjbb2015, probably because of the extra #VE
overhead or missed wakeups from the buggy HLT handling"
* tag 'x86_tdx_for_6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tdx: Emit warning if IRQs are enabled during HLT #VE handling
x86/tdx: Fix arch_safe_halt() execution for TDX VMs
x86/paravirt: Move halt paravirt calls under CONFIG_PARAVIRT
|
|
Pull final NVMe updates from Keith:
"nvme updates for Linux 6.15
- PCI endpoint target cleanup (Damien)
- Early import for uring_cmd fixed buffer (Caleb)
- Multipath documentation and notification improvements (John)
- Invalid pci sq doorbell write fix (Maurizio)"
* tag 'nvme-6.15-2025-04-02' of git://git.infradead.org/nvme:
nvme-pci: skip nvme_write_sq_db on empty rqlist
nvme-multipath: change the NVME_MULTIPATH config option
nvme: update the multipath warning in nvme_init_ns_head
nvme/ioctl: move fixed buffer lookup to nvme_uring_cmd_io()
nvme/ioctl: move blk_mq_free_request() out of nvme_map_user_request()
nvme/ioctl: don't warn on vectorized uring_cmd with fixed buffer
nvmet: pci-epf: Keep completion queues mapped
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"These are objtool fixes and updates by Josh Poimboeuf, centered around
the fallout from the new CONFIG_OBJTOOL_WERROR=y feature, which,
despite its default-off nature, increased the profile/impact of
objtool warnings:
- Improve error handling and the presentation of warnings/errors
- Revert the new summary warning line that some test-bot tools
interpreted as new regressions
- Fix a number of objtool warnings in various drivers, core kernel
code and architecture code. About half of them are potential
problems related to out-of-bounds accesses or potential undefined
behavior, the other half are additional objtool annotations
- Update objtool to latest (known) compiler quirks and objtool bugs
triggered by compiler code generation
- Misc fixes"
* tag 'objtool-urgent-2025-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
objtool/loongarch: Add unwind hints in prepare_frametrace()
rcu-tasks: Always inline rcu_irq_work_resched()
context_tracking: Always inline ct_{nmi,irq}_{enter,exit}()
sched/smt: Always inline sched_smt_active()
objtool: Fix verbose disassembly if CROSS_COMPILE isn't set
objtool: Change "warning:" to "error: " for fatal errors
objtool: Always fail on fatal errors
Revert "objtool: Increase per-function WARN_FUNC() rate limit"
objtool: Append "()" to function name in "unexpected end of section" warning
objtool: Ignore end-of-section jumps for KCOV/GCOV
objtool: Silence more KCOV warnings, part 2
objtool, drm/vmwgfx: Don't ignore vmw_send_msg() for ORC
objtool: Fix STACK_FRAME_NON_STANDARD for cold subfunctions
objtool: Fix segfault in ignore_unreachable_insn()
objtool: Fix NULL printf() '%s' argument in builtin-check.c:save_argv()
objtool, lkdtm: Obfuscate the do_nothing() pointer
objtool, regulator: rk808: Remove potential undefined behavior in rk806_set_mode_dcdc()
objtool, ASoC: codecs: wcd934x: Remove potential undefined behavior in wcd934x_slim_irq_handler()
objtool, Input: cyapa - Remove undefined behavior in cyapa_update_fw_store()
objtool, panic: Disable SMAP in __stack_chk_fail()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull more printk updates from Petr Mladek:
- Silence warnings about candidates for ‘gnu_print’ format attribute
* tag 'printk-for-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
vsnprintf: Silence false positive GCC warning for va_format()
vsnprintf: Drop unused const char fmt * in va_format()
vsnprintf: Mark binary printing functions with __printf() attribute
tracing: Mark binary printing functions with __printf() attribute
seq_file: Mark binary printing functions with __printf() attribute
seq_buf: Mark binary printing functions with __printf() attribute
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU fix from Boqun Feng:
- srcu: Make FORCE_NEED_SRCU_NMI_SAFE depend on RCU_EXPERT
* tag 'rcu-fixes-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux:
srcu: Make FORCE_NEED_SRCU_NMI_SAFE depend on RCU_EXPERT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb updates from Daniel Thompson:
"Two cleanups this cycle. The larger of which is the removal of a
private allocator within kdb and replacing it with regular memory
allocation. The other adopts the simplified version of strscpy() in a
couple of places in kdb"
* tag 'kgdb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kdb: Remove optional size arguments from strscpy() calls
kdb: remove usage of static environment buffer
|
|
Fix an obvious bug. try_alloc_pages() should set_page_refcounted.
[ Not so obvious: it was probably correct at the time it was written but
was at some point then rebased on top of v6.14-rc1.
And at that point there was a semantic conflict with commit
efabfe1420f5 ("mm/page_alloc: move set_page_refcounted() to callers
of get_page_from_freelist()") and became buggy.
- Linus ]
Fixes: 97769a53f117 ("mm, bpf: Introduce try_alloc_pages() for opportunistic page allocation")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil BAbka <vbabka@suse.cz>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
- revert the multibuffer hash testing as it is buggy
* tag 'v6.15-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
Revert "crypto: testmgr - Add multibuffer hash testing"
|
|
With SRIOV enabled, idpf ends up calling into idpf_remove() twice.
First via idpf_shutdown() and then again when idpf_remove() calls into
sriov_disable(), because the VF devices use the idpf driver, hence the
same remove routine. When that happens, it is possible for the adapter
to be NULL from the first call to idpf_remove(), leading to a NULL
pointer dereference.
echo 1 > /sys/class/net/<netif>/device/sriov_numvfs
reboot
BUG: kernel NULL pointer dereference, address: 0000000000000020
...
RIP: 0010:idpf_remove+0x22/0x1f0 [idpf]
...
? idpf_remove+0x22/0x1f0 [idpf]
? idpf_remove+0x1e4/0x1f0 [idpf]
pci_device_remove+0x3f/0xb0
device_release_driver_internal+0x19f/0x200
pci_stop_bus_device+0x6d/0x90
pci_stop_and_remove_bus_device+0x12/0x20
pci_iov_remove_virtfn+0xbe/0x120
sriov_disable+0x34/0xe0
idpf_sriov_configure+0x58/0x140 [idpf]
idpf_remove+0x1b9/0x1f0 [idpf]
idpf_shutdown+0x12/0x30 [idpf]
pci_device_shutdown+0x35/0x60
device_shutdown+0x156/0x200
...
Replace the direct idpf_remove() call in idpf_shutdown() with
idpf_vc_core_deinit() and idpf_deinit_dflt_mbx(), which perform
the bulk of the cleanup, such as stopping the init task, freeing IRQs,
destroying the vports and freeing the mailbox. This avoids the calls to
sriov_disable() in addition to a small netdev cleanup, and destroying
workqueues, which don't seem to be required on shutdown.
Reported-by: Yuying Ma <yuma@redhat.com>
Fixes: e850efed5e15 ("idpf: add module register and probe functionality")
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The commit 23c0e5a16bcc ("ixgbe: Add link management support for E610
device") introduced incorrect media type detection for E610 device. It
reproduces when advertised speed is modified after driver reload. Clear
the previous outdated PHY type high value.
Reproduction steps:
modprobe ixgbe
ethtool -s eth0 advertise 0x1000000000000
modprobe -r ixgbe
modprobe ixgbe
ethtool -s eth0 advertise 0x1000000000000
Result before the fix:
netlink error: link settings update failed
netlink error: Invalid argument
Result after the fix:
No output error
Fixes: 23c0e5a16bcc ("ixgbe: Add link management support for E610 device")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Bharath R <bharath.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Starting from Meteor Lake, the Kumeran interface between the integrated
MAC and the I219 PHY works at a different frequency. This causes sporadic
MDI errors when accessing the PHY, and in rare circumstances could lead
to packet corruption.
To overcome this, introduce minor changes to the Kumeran idle
state (K1) parameters during device initialization. Hardware reset
reverts this configuration, therefore it needs to be applied in a few
places.
Fixes: cc23f4f0b6b9 ("e1000e: Add support for Meteor Lake")
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fixes TX frame drops in AF_XDP zero copy mode when budget < 4.
xsk_tx_peek_desc() consumed TX frame and it was ignored because of
low budget. Not even AF_XDP completion was done for dropped frames.
It can be reproduced on i226 by sending 100000x 60 B frames with
launch time set to minimal IPG (672 ns between starts of frames)
on 1Gbit/s. Always 1026 frames are not sent and are missing a
completion.
Fixes: 9acf59a752d4c ("igc: Enable TX via AF_XDP zero-copy")
Signed-off-by: Zdenek Bouska <zdenek.bouska@siemens.com>
Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com>
Reviewed-by: Florian Bezdeka <florian.bezdeka@siemens.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In commit b65969856d4f ("igc: Link queues to NAPI instances"), the XSK
queues were incorrectly unmapped from their NAPI instances. After
discussion on the mailing list and the introduction of a test to codify
the expected behavior, we can see that the unmapping causes the
check_xsk test to fail:
NETIF=enp86s0 ./tools/testing/selftests/drivers/net/queues.py
[...]
# Check| ksft_eq(q.get('xsk', None), {},
# Check failed None != {} xsk attr on queue we configured
not ok 4 queues.check_xsk
After this commit, the test passes:
ok 4 queues.check_xsk
Note that the test itself is only in net-next, so I tested this change
by applying it to my local net-next tree, booting, and running the test.
Cc: stable@vger.kernel.org
Fixes: b65969856d4f ("igc: Link queues to NAPI instances")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Some architectures do not have data cache coherency between user and
kernel space. For these architectures, the cache needs to be flushed on
both the kernel and user addresses so that user space can see the updates
the kernel has made.
Instead of using flush_dcache_folio() and playing with virt_to_folio()
within the call to that function, use flush_kernel_vmap_range() which
takes the virtual address and does the work for those architectures that
need it.
This also fixes a bug where the flush of the reader page only flushed one
page. If the sub-buffer order is 1 or more, where the sub-buffer size
would be greater than a page, it would miss the rest of the sub-buffer
content, as the "reader page" is not just a page, but the size of a
sub-buffer.
Link: https://lore.kernel.org/all/CAG48ez3w0my4Rwttbc5tEbNsme6tc0mrSN95thjXUFaJ3aQ6SA@mail.gmail.com/
Cc: stable@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Link: https://lore.kernel.org/20250402144953.920792197@goodmis.org
Fixes: 117c39200d9d7 ("ring-buffer: Introducing ring-buffer mapping functions");
Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The code to map the physical memory retrieved by memmap currently
allocates an array of pages to cover the physical memory and then calls
vmap() to map it to a virtual address. Instead of using this temporary
array of struct page descriptors, simply use vmap_page_range() that can
directly map the contiguous physical memory to a virtual address.
Link: https://lore.kernel.org/all/CAHk-=whUOfVucfJRt7E0AH+GV41ELmS4wJqxHDnui6Giddfkzw@mail.gmail.com/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/20250402144953.754618481@goodmis.org
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The reserve_mem kernel command line option may pass back a physical
address, but the memory is still part of the normal memory just like
using memblock_alloc() would be. This means that the physical memory
returned by the reserve_mem command line option can be converted directly
to virtual memory by simply using phys_to_virt().
When freeing the buffer there's no need to call vunmap() anymore as the
memory allocated by reserve_mem is freed by the call to
reserve_mem_release_by_name().
Because the persistent ring buffer can also be allocated via the memmap
option, which *is* different than normal memory as it cannot be added back
to the buddy system, it must be treated differently. It still needs to be
virtually mapped to have access to it. It also can not be freed nor can it
ever be memory mapped to user space.
Create a new trace_array flag called TRACE_ARRAY_FL_MEMMAP which gets set
if the buffer is created by the memmap option, and this will prevent the
buffer from being memory mapped by user space.
Also increment the ref count for memmap'ed buffers so that they can never
be freed.
Link: https://lore.kernel.org/all/Z-wFszhJ_9o4dc8O@kernel.org/
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/20250402144953.583750106@goodmis.org
Suggested-by: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Enforce that the address and the size of the memory used by the persistent
ring buffer is page aligned. Also update the documentation to reflect this
requirement.
Link: https://lore.kernel.org/all/CAHk-=whUOfVucfJRt7E0AH+GV41ELmS4wJqxHDnui6Giddfkzw@mail.gmail.com/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/20250402144953.412882844@goodmis.org
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When CONFIG_XARRAY_MULTI is not set, reading from a bcachefs file hits
the 'BUG_ON(order > 0);' in xas_set_order(), because it tries to insert
a large folio in the page cache. Fix this by making bcachefs select
XARRAY_MULTI.
Fixes: be212d86b19c ("bcachefs: bs > ps support")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
All the fastpaths that need device usage don't need the sector totals or
fragmentation, just bucket counts.
Split bch_dev_usage up into two different versions, the normal one with
just bucket counts.
This is also a stack usage improvement, since we have a bch_dev_usage on
the stack in the allocation path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This was planned to be done ages ago, now finally completed; there are
places where we have quite a few btree_trans objects on the stack, so
this reduces stack usage somewhat.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Reducing stack frame usage; this moves the printbuf out of the main
stack frame.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We now have separate per device io_refs for read and write access.
This fixes a device removal bug where the discard workers were still
running while we're removing alloc info for that device.
It's also a bit of hardening; we no longer allow writes to devices that
are read-only.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
