summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-02-19bcachefs: Fix bch2_indirect_extent_missing_error()Kent Overstreet
We had some error handling confusion here; -BCH_ERR_missing_indirect_extent is thrown by trans_trigger_reflink_p_segment(); at this point we haven't decide whether we're generating an error. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-02-19KVM: arm64: Fix tcr_el2 initialisation in hVHE modeWill Deacon
When not running in VHE mode, cpu_prepare_hyp_mode() computes the value of TCR_EL2 using the host's TCR_EL1 settings as a starting point. For nVHE, this amounts to masking out everything apart from the TG0, SH0, ORGN0, IRGN0 and T0SZ fields before setting the RES1 bits, shifting the IPS field down to the PS field and setting DS if LPA2 is enabled. Unfortunately, for hVHE, things go slightly wonky: EPD1 is correctly set to disable walks via TTBR1_EL2 but then the T1SZ and IPS fields are corrupted when we mistakenly attempt to initialise the PS and DS fields in their E2H=0 positions. Furthermore, many fields are retained from TCR_EL1 which should not be propagated to TCR_EL2. Notably, this means we can end up with A1 set despite not initialising TTBR1_EL2 at all. This has been shown to cause unexpected translation faults at EL2 with pKVM due to TLB invalidation not taking effect when running with a non-zero ASID. Fix the TCR_EL2 initialisation code to set PS and DS only when E2H=0, masking out HD, HA and A1 when E2H=1. Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Fixes: ad744e8cb346 ("arm64: Allow arm64_sw.hvhe on command line") Signed-off-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20250214133724.13179-1-will@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-02-19SUNRPC: Handle -ETIMEDOUT return from tlshdBenjamin Coddington
If the TLS handshake attempt returns -ETIMEDOUT, we currently translate that error into -EACCES. This becomes problematic for cases where the RPC layer is attempting to re-connect in paths that don't resonably handle -EACCES, for example: writeback. The RPC layer can handle -ETIMEDOUT quite well, however - so if the handshake returns this error let's just pass it along. Fixes: 75eb6af7acdf ("SUNRPC: Add a TCP-with-TLS RPC transport class") Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
2025-02-19NFSv4: Fix a deadlock when recovering state on a sillyrenamed fileTrond Myklebust
If the file is sillyrenamed, and slated for delete on close, it is possible for a server reboot to triggeer an open reclaim, with can again race with the application call to close(). When that happens, the call to put_nfs_open_context() can trigger a synchronous delegreturn call which deadlocks because it is not marked as privileged. Instead, ensure that the call to nfs4_inode_return_delegation_on_close() catches the delegreturn, and schedules it asynchronously. Reported-by: Li Lingfeng <lilingfeng3@huawei.com> Fixes: adb4b42d19ae ("Return the delegation when deleting sillyrenamed files") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
2025-02-19SUNRPC: Prevent looping due to rpc_signal_task() racesTrond Myklebust
If rpc_signal_task() is called while a task is in an rpc_call_done() callback function, and the latter calls rpc_restart_call(), the task can end up looping due to the RPC_TASK_SIGNALLED flag being set without the tk_rpc_status being set. Removing the redundant mechanism for signalling the task fixes the looping behaviour. Reported-by: Li Lingfeng <lilingfeng3@huawei.com> Fixes: 39494194f93b ("SUNRPC: Fix races with rpc_killall_tasks()") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
2025-02-19NFS: Adjust delegated timestamps for O_DIRECT reads and writesTrond Myklebust
Adjust the timestamps if O_DIRECT is being combined with attribute delegations. Fixes: e12912d94137 ("NFSv4: Add support for delegated atime and mtime attributes") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
2025-02-19NFS: O_DIRECT writes must check and adjust the file lengthTrond Myklebust
While it is uncommon for delegations to be held while O_DIRECT writes are in progress, it is possible. The xfstests generic/647 and generic/729 both end up triggering that state, and end up failing due to the fact that the file size is not adjusted. Reported-by: Chuck Lever <chuck.lever@oracle.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=219738 Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
2025-02-19io_uring/rw: clean up mshot forced sync modePavel Begunkov
Move code forcing synchronous execution of multishot read requests out a more generic __io_read(). Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/4ad7b928c776d1ad59addb9fff64ef2d1fc474d5.1739919038.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-02-19io_uring/rw: move ki_complete init into prepPavel Begunkov
Initialise ki_complete during request prep stage, we'll depend on it not being reset during issue in the following patch. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/817624086bd5f0448b08c80623399919fda82f34.1739919038.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-02-19io_uring/rw: don't directly use ki_completePavel Begunkov
We want to avoid checking ->ki_complete directly in the io_uring completion path. Fortunately we have only two callback the selection of which depend on the ring constant flags, i.e. IOPOLL, so use that to infer the function. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/4eb4bdab8cbcf5bc87083f7047edc81e920ab83c.1739919038.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-02-19io_uring/rw: forbid multishot async readsPavel Begunkov
At the moment we can't sanely handle queuing an async request from a multishot context, so disable them. It shouldn't matter as pollable files / socekts don't normally do async. Patching it in __io_read() is not the cleanest way, but it's simpler than other options, so let's fix it there and clean up on top. Cc: stable@vger.kernel.org Reported-by: chase xd <sl1589472800@gmail.com> Fixes: fc68fcda04910 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/7d51732c125159d17db4fe16f51ec41b936973f8.1739919038.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-02-19drm/i915/dp: Fix disabling the transcoder function in 128b/132b modeImre Deak
During disabling the transcoder in DP 128b/132b mode (both in case of an MST master transcoder and in case of SST) the transcoder function must be first disabled without changing any other field in the register (in particular leaving the DDI port and mode select fields unchanged) and clearing the DDI port and mode select fields separately, later during the disabling sequences. Fix the sequence accordingly. Bspec: 54128, 65448, 68849 Cc: Jani Nikula <jani.nikula@intel.com> Fixes: 79a6734cd56e ("drm/i915/ddi: disable trancoder port select for 128b/132b SST") Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250217223828.1166093-3-imre.deak@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 2ed653c7b843db0670136330480842d76cb65cd8) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-02-19drm/i915/dp: Fix error handling during 128b/132b link trainingImre Deak
At the end of a 128b/132b link training sequence, the HW expects the transcoder training pattern to be set to TPS2 and from that to normal mode (disabling the training pattern). Transitioning from TPS1 directly to normal mode leaves the transcoder in a stuck state, resulting in page-flip timeouts later in the modeset sequence. Atm, in case of a failure during link training, the transcoder may be still set to output the TPS1 pattern. Later the transcoder is then set from TPS1 directly to normal mode in intel_dp_stop_link_train(), leading to modeset failures later as described above. Fix this by setting the training patter to TPS2, if the link training failed at any point. The clue in the specification about the above HW behavior is the explicit mention that TPS2 must be set after the link training sequence (and there isn't a similar requirement specified for the 8b/10b link training), see the Bspec links below. v2: Add bspec aspect/link to the commit log. (Jani) Bspec: 54128, 65448, 68849 Cc: stable@vger.kernel.org # v5.18+ Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250217223828.1166093-2-imre.deak@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 8b4bbaf8ddc1f68f3ee96a706f65fdb1bcd9d355) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-02-19bcachefs: Fix fsck directory i_size checkingKent Overstreet
Error handling was wrong, causing unhandled transaction restart errors. check_directory_size() was also inefficient, since keys in multiple snapshots would be iterated over once for every snapshot. Convert it to the same scheme used for i_sectors and subdir count checking. Cc: Hongbo Li <lihongbo22@huawei.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-02-19accel/amdxdna: Add missing include linux/slab.hSu Hui
When compiling without CONFIG_IA32_EMULATION, there can be some errors: drivers/accel/amdxdna/amdxdna_mailbox.c: In function ‘mailbox_release_msg’: drivers/accel/amdxdna/amdxdna_mailbox.c:197:2: error: implicit declaration of function ‘kfree’. 197 | kfree(mb_msg); | ^~~~~ drivers/accel/amdxdna/amdxdna_mailbox.c: In function ‘xdna_mailbox_send_msg’: drivers/accel/amdxdna/amdxdna_mailbox.c:418:11: error:implicit declaration of function ‘kzalloc’. 418 | mb_msg = kzalloc(sizeof(*mb_msg) + pkg_size, GFP_KERNEL); | ^~~~~~~ Add the missing include. Fixes: b87f920b9344 ("accel/amdxdna: Support hardware mailbox") Signed-off-by: Su Hui <suhui@nfschina.com> Reviewed-by: Lizhi Hou <lizhi.hou@amd.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250211015354.3388171-1-suhui@nfschina.com
2025-02-19ovl: fix UAF in ovl_dentry_update_reval by moving dput() in ovl_link_upVasiliy Kovalev
The issue was caused by dput(upper) being called before ovl_dentry_update_reval(), while upper->d_flags was still accessed in ovl_dentry_remote(). Move dput(upper) after its last use to prevent use-after-free. BUG: KASAN: slab-use-after-free in ovl_dentry_remote fs/overlayfs/util.c:162 [inline] BUG: KASAN: slab-use-after-free in ovl_dentry_update_reval+0xd2/0xf0 fs/overlayfs/util.c:167 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc3/0x620 mm/kasan/report.c:488 kasan_report+0xd9/0x110 mm/kasan/report.c:601 ovl_dentry_remote fs/overlayfs/util.c:162 [inline] ovl_dentry_update_reval+0xd2/0xf0 fs/overlayfs/util.c:167 ovl_link_up fs/overlayfs/copy_up.c:610 [inline] ovl_copy_up_one+0x2105/0x3490 fs/overlayfs/copy_up.c:1170 ovl_copy_up_flags+0x18d/0x200 fs/overlayfs/copy_up.c:1223 ovl_rename+0x39e/0x18c0 fs/overlayfs/dir.c:1136 vfs_rename+0xf84/0x20a0 fs/namei.c:4893 ... </TASK> Fixes: b07d5cc93e1b ("ovl: update of dentry revalidate flags after copy up") Reported-by: syzbot+316db8a1191938280eb6@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=316db8a1191938280eb6 Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org> Link: https://lore.kernel.org/r/20250214215148.761147-1-kovalev@altlinux.org Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-02-19cifs: Treat unhandled directory name surrogate reparse points as mount ↵Pali Rohár
directory nodes If the reparse point was not handled (indicated by the -EOPNOTSUPP from ops->parse_reparse_point() call) but reparse tag is of type name surrogate directory type, then treat is as a new mount point. Name surrogate reparse point represents another named entity in the system. From SMB client point of view, this another entity is resolved on the SMB server, and server serves its content automatically. Therefore from Linux client point of view, this name surrogate reparse point of directory type crosses mount point. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2025-02-19cifs: Throw -EOPNOTSUPP error on unsupported reparse point type from ↵Pali Rohár
parse_reparse_point() This would help to track and detect by caller if the reparse point type was processed or not. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2025-02-19smb311: failure to open files of length 1040 when mounting with SMB3.1.1 ↵Steve French
POSIX extensions If a file size has bits 0x410 = ATTR_DIRECTORY | ATTR_REPARSE set then during queryinfo (stat) the file is regarded as a directory and subsequent opens can fail. A simple test example is trying to open any file 1040 bytes long when mounting with "posix" (SMB3.1.1 POSIX/Linux Extensions). The cause of this bug is that Attributes field in smb2_file_all_info struct occupies the same place that EndOfFile field in smb311_posix_qinfo, and sometimes the latter struct is incorrectly processed as if it was the first one. Reported-by: Oleh Nykyforchyn <oleh.nyk@gmail.com> Tested-by: Oleh Nykyforchyn <oleh.nyk@gmail.com> Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
2025-02-19smb: client, common: Avoid multiple -Wflex-array-member-not-at-end warningsGustavo A. R. Silva
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are getting ready to enable it, globally. So, in order to avoid ending up with flexible-array members in the middle of other structs, we use the `__struct_group()` helper to separate the flexible arrays from the rest of the members in the flexible structures. We then use the newly created tagged `struct smb2_file_link_info_hdr` and `struct smb2_file_rename_info_hdr` to replace the type of the objects causing trouble: `rename_info` and `link_info` in `struct smb2_compound_vars`. We also want to ensure that when new members need to be added to the flexible structures, they are always included within the newly created tagged structs. For this, we use `static_assert()`. This ensures that the memory layout for both the flexible structure and the new tagged struct is the same after any changes. So, with these changes, fix 86 of the following warnings: fs/smb/client/cifsglob.h:2335:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] fs/smb/client/cifsglob.h:2334:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2025-02-19MAINTAINERS: change maintainer for FSIEddie James
Due to job transitions, both Joel and Jeremy can no longer maintain the FSI subsystem. I will take over. I also replaced Alistair with Ninad as a reviewer, as Alistair doesn't have access to hardware and hasn't been active. I also removed the link to Joel's FSI tree as he won't be maintaining it. Signed-off-by: Eddie James <eajames@linux.ibm.com> Acked-by: Jeremy Kerr <jk@ozlabs.org> Link: https://lore.kernel.org/r/20250213225746.2159118-1-eajames@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-19io_uring/rsrc: remove unused constantsCaleb Sander Mateos
IO_NODE_ALLOC_CACHE_MAX has been unused since commit fbbb8e991d86 ("io_uring/rsrc: get rid of io_rsrc_node allocation cache") removed the rsrc_node_cache. IO_RSRC_TAG_TABLE_SHIFT and IO_RSRC_TAG_TABLE_MASK have been unused since commit 7029acd8a950 ("io_uring/rsrc: get rid of per-ring io_rsrc_node list") removed the separate tag table for registered nodes. Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Reviewed-by: Li Zetao <lizetao1@huawei.com> Link: https://lore.kernel.org/r/20250219033444.2020136-1-csander@purestorage.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-02-19ntsync: Set the permissions to be 0666Mike Lothian
This allows ntsync to be usuable by non-root processes out of the box Signed-off-by: Mike Lothian <mike@fireburn.co.uk> Reviewed-by: Elizabeth Figura <zfigura@codeweavers.com> Link: https://lore.kernel.org/r/20250214122759.2629-2-mike@fireburn.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-19bus: mhi: host: pci_generic: Use pci_try_reset_function() to avoid deadlockManivannan Sadhasivam
There are multiple places from where the recovery work gets scheduled asynchronously. Also, there are multiple places where the caller waits synchronously for the recovery to be completed. One such place is during the PM shutdown() callback. If the device is not alive during recovery_work, it will try to reset the device using pci_reset_function(). This function internally will take the device_lock() first before resetting the device. By this time, if the lock has already been acquired, then recovery_work will get stalled while waiting for the lock. And if the lock was already acquired by the caller which waits for the recovery_work to be completed, it will lead to deadlock. This is what happened on the X1E80100 CRD device when the device died before shutdown() callback. Driver core calls the driver's shutdown() callback while holding the device_lock() leading to deadlock. And this deadlock scenario can occur on other paths as well, like during the PM suspend() callback, where the driver core would hold the device_lock() before calling driver's suspend() callback. And if the recovery_work was already started, it could lead to deadlock. This is also observed on the X1E80100 CRD. So to fix both issues, use pci_try_reset_function() in recovery_work. This function first checks for the availability of the device_lock() before trying to reset the device. If the lock is available, it will acquire it and reset the device. Otherwise, it will return -EAGAIN. If that happens, recovery_work will fail with the error message "Recovery failed" as not much could be done. Cc: stable@vger.kernel.org # 5.12 Reported-by: Johan Hovold <johan@kernel.org> Closes: https://lore.kernel.org/mhi/Z1me8iaK7cwgjL92@hovoldconsulting.com Fixes: 7389337f0a78 ("mhi: pci_generic: Add suspend/resume/recovery procedure") Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Analyzed-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/mhi/Z2KKjWY2mPen6GPL@hovoldconsulting.com/ Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/20250108-mhi_recovery_fix-v1-1-a0a00a17da46@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2025-02-19usb: typec: ucsi: increase timeout for PPM reset operationsFedor Pchelkin
It is observed that on some systems an initial PPM reset during the boot phase can trigger a timeout: [ 6.482546] ucsi_acpi USBC000:00: failed to reset PPM! [ 6.482551] ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed Still, increasing the timeout value, albeit being the most straightforward solution, eliminates the problem: the initial PPM reset may take up to ~8000-10000ms on some Lenovo laptops. When it is reset after the above period of time (or even if ucsi_reset_ppm() is not called overall), UCSI works as expected. Moreover, if the ucsi_acpi module is loaded/unloaded manually after the system has booted, reading the CCI values and resetting the PPM works perfectly, without any timeout. Thus it's only a boot-time issue. The reason for this behavior is not clear but it may be the consequence of some tricks that the firmware performs or be an actual firmware bug. As a workaround, increase the timeout to avoid failing the UCSI initialization prematurely. Fixes: b1b59e16075f ("usb: typec: ucsi: Increase command completion timeout value") Cc: stable <stable@kernel.org> Signed-off-by: Fedor Pchelkin <boddah8794@gmail.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250217105442.113486-3-boddah8794@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-19acpi: typec: ucsi: Introduce a ->poll_cci methodChristian A. Ehrhardt
For the ACPI backend of UCSI the UCSI "registers" are just a memory copy of the register values in an opregion. The ACPI implementation in the BIOS ensures that the opregion contents are synced to the embedded controller and it ensures that the registers (in particular CCI) are synced back to the opregion on notifications. While there is an ACPI call that syncs the actual registers to the opregion there is rarely a need to do this and on some ACPI implementations it actually breaks in various interesting ways. The only reason to force a sync from the embedded controller is to poll CCI while notifications are disabled. Only the ucsi core knows if this is the case and guessing based on the current command is suboptimal, i.e. leading to the following spurious assertion splat: WARNING: CPU: 3 PID: 76 at drivers/usb/typec/ucsi/ucsi.c:1388 ucsi_reset_ppm+0x1b4/0x1c0 [typec_ucsi] CPU: 3 UID: 0 PID: 76 Comm: kworker/3:0 Not tainted 6.12.11-200.fc41.x86_64 #1 Hardware name: LENOVO 21D0/LNVNB161216, BIOS J6CN45WW 03/17/2023 Workqueue: events_long ucsi_init_work [typec_ucsi] RIP: 0010:ucsi_reset_ppm+0x1b4/0x1c0 [typec_ucsi] Call Trace: <TASK> ucsi_init_work+0x3c/0xac0 [typec_ucsi] process_one_work+0x179/0x330 worker_thread+0x252/0x390 kthread+0xd2/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Thus introduce a ->poll_cci() method that works like ->read_cci() with an additional forced sync and document that this should be used when polling with notifications disabled. For all other backends that presumably don't have this issue use the same implementation for both methods. Fixes: fa48d7e81624 ("usb: typec: ucsi: Do not call ACPI _DSM method for UCSI read operations") Cc: stable <stable@kernel.org> Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Tested-by: Fedor Pchelkin <boddah8794@gmail.com> Signed-off-by: Fedor Pchelkin <boddah8794@gmail.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250217105442.113486-2-boddah8794@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-19usb: typec: tcpci_rt1711h: Unmask alert interrupts to fix functionalityAngeloGioacchino Del Regno
During probe, the TCPC alert interrupts are getting masked to avoid unwanted interrupts during chip setup: this is ok to do but there is no unmasking happening at any later time, which means that the chip will not raise any interrupt, essentially making it not functional as, while internally it does perform all of the intended functions, it won't signal anything to the outside. Unmask the alert interrupts to fix functionality. Fixes: ce08eaeb6388 ("staging: typec: rt1711h typec chip driver") Cc: stable <stable@kernel.org> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20250219114700.41700-1-angelogioacchino.delregno@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-19usb: gadget: Set self-powered based on MaxPower and bmAttributesPrashanth K
Currently the USB gadget will be set as bus-powered based solely on whether its bMaxPower is greater than 100mA, but this may miss devices that may legitimately draw less than 100mA but still want to report as bus-powered. Similarly during suspend & resume, USB gadget is incorrectly marked as bus/self powered without checking the bmAttributes field. Fix these by configuring the USB gadget as self or bus powered based on bmAttributes, and explicitly set it as bus-powered if it draws more than 100mA. Cc: stable <stable@kernel.org> Fixes: 5e5caf4fa8d3 ("usb: gadget: composite: Inform controller driver of self-powered") Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250217120328.2446639-1-prashanth.k@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-19usb: gadget: u_ether: Set is_suspend flag if remote wakeup failsPrashanth K
Currently while UDC suspends, u_ether attempts to remote wakeup the host if there are any pending transfers. However, if remote wakeup fails, the UDC remains suspended but the is_suspend flag is not set. And since is_suspend flag isn't set, the subsequent eth_start_xmit() would queue USB requests to suspended UDC. To fix this, bail out from gether_suspend() only if remote wakeup operation is successful. Cc: stable <stable@kernel.org> Fixes: 0a1af6dfa077 ("usb: gadget: f_ecm: Add suspend/resume and remote wakeup support") Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250212100840.3812153-1-prashanth.k@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-19usb: atm: cxacru: fix a flaw in existing endpoint checksNikita Zhandarovich
Syzbot once again identified a flaw in usb endpoint checking, see [1]. This time the issue stems from a commit authored by me (2eabb655a968 ("usb: atm: cxacru: fix endpoint checking in cxacru_bind()")). While using usb_find_common_endpoints() may usually be enough to discard devices with wrong endpoints, in this case one needs more than just finding and identifying the sufficient number of endpoints of correct types - one needs to check the endpoint's address as well. Since cxacru_bind() fills URBs with CXACRU_EP_CMD address in mind, switch the endpoint verification approach to usb_check_XXX_endpoints() instead to fix incomplete ep testing. [1] Syzbot report: usb 5-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 0 PID: 1378 at drivers/usb/core/urb.c:504 usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503 ... RIP: 0010:usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503 ... Call Trace: <TASK> cxacru_cm+0x3c8/0xe50 drivers/usb/atm/cxacru.c:649 cxacru_card_status drivers/usb/atm/cxacru.c:760 [inline] cxacru_bind+0xcf9/0x1150 drivers/usb/atm/cxacru.c:1223 usbatm_usb_probe+0x314/0x1d30 drivers/usb/atm/usbatm.c:1058 cxacru_usb_probe+0x184/0x220 drivers/usb/atm/cxacru.c:1377 usb_probe_interface+0x641/0xbb0 drivers/usb/core/driver.c:396 really_probe+0x2b9/0xad0 drivers/base/dd.c:658 __driver_probe_device+0x1a2/0x390 drivers/base/dd.c:800 driver_probe_device+0x50/0x430 drivers/base/dd.c:830 ... Reported-and-tested-by: syzbot+ccbbc229a024fa3e13b5@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=ccbbc229a024fa3e13b5 Fixes: 2eabb655a968 ("usb: atm: cxacru: fix endpoint checking in cxacru_bind()") Cc: stable@kernel.org Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Link: https://lore.kernel.org/r/20250213122259.730772-1-n.zhandarovich@fintech.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-19mei: vsc: Use "wakeuphostint" when getting the host wakeup GPIOHans de Goede
The _CRS ACPI resources table has 2 entries for the host wakeup GPIO, the first one being a regular GpioIo () resource while the second one is a GpioInt () resource for the same pin. The acpi_gpio_mapping table used by vsc-tp.c maps the first Gpio () resource to "wakeuphost-gpios" where as the second GpioInt () entry is mapped to "wakeuphostint-gpios". Using "wakeuphost" to request the GPIO as was done until now, means that the gpiolib-acpi code does not know that the GPIO is active-low as that info is only available in the GpioInt () entry. Things were still working before due to the following happening: 1. Since the 2 entries point to the same pin they share a struct gpio_desc 2. The SPI core creates the SPI device vsc-tp.c binds to and calls acpi_dev_gpio_irq_get(). This does use the second entry and sets FLAG_ACTIVE_LOW in gpio_desc.flags . 3. vsc_tp_probe() requests the "wakeuphost" GPIO and inherits the active-low flag set by acpi_dev_gpio_irq_get() But there is a possible scenario where things do not work: 1. - 3. happen as above 4. After requesting the "wakeuphost" GPIO, the "resetfw" GPIO is requested next, but its USB GPIO controller is not available yet, so this call returns -EPROBE_DEFER. 5. The gpio_desc for "wakeuphost" is put() and during this the active-low flag is cleared from gpio_desc.flags . 6. Later on vsc_tp_probe() requests the "wakeuphost" GPIO again, but now it is not marked active-low. The difference can also be seen in /sys/kernel/debug/gpio, which contains the following line for this GPIO: gpio-535 ( |wakeuphost ) in hi IRQ ACTIVE LOW If the second scenario is hit the "ACTIVE LOW" at the end disappears and things do not work. Fix this by requesting the GPIO through the "wakeuphostint" mapping instead which provides active-low info without relying on acpi_dev_gpio_irq_get() pre-populating this info in the gpio_desc. Link: https://bugzilla.redhat.com/show_bug.cgi?id=2316918 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com> Fixes: 566f5ca97680 ("mei: Add transport driver for IVSC device") Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20250214212425.84021-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-19mei: me: add panther lake P DIDAlexander Usyskin
Add Panther Lake P device id. Cc: stable <stable@kernel.org> Co-developed-by: Tomas Winkler <tomasw@gmail.com> Signed-off-by: Tomas Winkler <tomasw@gmail.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Link: https://lore.kernel.org/r/20250209110550.1582982-1-alexander.usyskin@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-19Merge tag 'spi-nor/fixes-for-6.14-rc4' of ↵Miquel Raynal
https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/fixes Fix writes on SST flashes Commit 18bcb4aa54ea ("mtd: spi-nor: sst: Factor out common write operation to `sst_nor_write_data()`") introduced a bug where only one byte of data is written, regardless of the number of bytes requested. This causes the driver to use the incorrect write size for flashes using the SST byte programming, and to spit out a warning. # -----BEGIN PGP SIGNATURE----- # # iIoEABYIADIWIQQTlUWNzXGEo3bFmyIR4drqP028CQUCZ7NEiBQccHJhdHl1c2hA # a2VybmVsLm9yZwAKCRAR4drqP028CTVnAP9krBOLfmlYO94PntaDscgjcehnxbuF # PEQby8/KlEnX0gEA5K73/0oQIZUnHQ98E6ntAtKoYD5zGNAJaYDpw+66CAU= # =5xea # -----END PGP SIGNATURE----- # gpg: Signature made Mon 17 Feb 2025 03:15:36 PM CET # gpg: using EDDSA key 1395458DCD7184A376C59B2211E1DAEA3F4DBC09 # gpg: issuer "pratyush@kernel.org" # gpg: Good signature from "Pratyush Yadav <p.yadav@ti.com>" [expired] # gpg: aka "Pratyush Yadav <me@yadavpratyush.com>" [expired] # gpg: issuer "pratyush@kernel.org" does not match any User ID # gpg: WARNING: The key's User ID is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 805C 3923 2FBE 108C 49E1 663C F650 3556 C11B 1CCD # Subkey fingerprint: 1395 458D CD71 84A3 76C5 9B22 11E1 DAEA 3F4D BC09
2025-02-19mtd: rawnand: cadence: fix unchecked dereferenceNiravkumar L Rabara
Add NULL check before variable dereference to fix static checker warning. Fixes: d76d22b5096c ("mtd: rawnand: cadence: use dma_map_resource for sdma address") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/e448a22c-bada-448d-9167-7af71305130d@stanley.mountain/ Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-02-19MAINTAINERS: Remove myselfKarol Herbst
I was pondering with myself for a while if I should just make it official that I'm not really involved in the kernel community anymore, neither as a reviewer, nor as a maintainer. Most of the time I simply excused myself with "if something urgent comes up, I can chime in and help out". Lyude and Danilo are doing a wonderful job and I've put all my trust into them. However, there is one thing I can't stand and it's hurting me the most. I'm convinced, no, my core believe is, that inclusivity and respect, working with others as equals, no power plays involved, is how we should work together within the Free and Open Source community. I can understand maintainers needing to learn, being concerned on technical points. Everybody deserves the time to understand and learn. It is my true belief that most people are capable of change eventually. I truly believe this community can change from within, however this doesn't mean it's going to be a smooth process. The moment I made up my mind about this was reading the following words written by a maintainer within the kernel community: "we are the thin blue line" This isn't okay. This isn't creating an inclusive environment. This isn't okay with the current political situation especially in the US. A maintainer speaking those words can't be kept. No matter how important or critical or relevant they are. They need to be removed until they learn. Learn what those words mean for a lot of marginalized people. Learn about what horrors it evokes in their minds. I can't in good faith remain to be part of a project and its community where those words are tolerated. Those words are not technical, they are a political statement. Even if unintentionally, such words carry power, they carry meanings one needs to be aware of. They do cause an immense amount of harm. I wish the best of luck for everybody to continue to try to work from within. You got my full support and I won't hold it against anybody trying to improve the community, it's a thankless job, it's a lot of work. People will continue to burn out. I got burned out enough by myself caring about the bits I maintained, but eventually I had to realize my limits. The obligation I felt was eating me from inside. It stopped being fun at some point and I reached a point where I simply couldn't continue the work I was so motivated doing as I've did in the early days. Please respect my wishes and put this statement as is into the tree. Leaving anything out destroys its entire meaning. Respectfully Karol Signed-off-by: Karol Herbst <kherbst@redhat.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Danilo Krummrich <dakr@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250215073753.1217002-2-kherbst@redhat.com
2025-02-19drm/nouveau/pmu: Fix gp10b firmware guardAaron Kling
Most kernel configs enable multiple Tegra SoC generations, causing this typo to go unnoticed. But in the case where a kernel config is strictly for Tegra186, this is a problem. Fixes: 989863d7cbe5 ("drm/nouveau/pmu: select implementation based on available firmware") Signed-off-by: Aaron Kling <webgeek1234@gmail.com> Signed-off-by: Danilo Krummrich <dakr@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250218-nouveau-gm10b-guard-v2-1-a4de71500d48@gmail.com
2025-02-19HID: intel-ish-hid: Fix use-after-free issue in ishtp_hid_remove()Zhang Lixu
The system can experience a random crash a few minutes after the driver is removed. This issue occurs due to improper handling of memory freeing in the ishtp_hid_remove() function. The function currently frees the `driver_data` directly within the loop that destroys the HID devices, which can lead to accessing freed memory. Specifically, `hid_destroy_device()` uses `driver_data` when it calls `hid_ishtp_set_feature()` to power off the sensor, so freeing `driver_data` beforehand can result in accessing invalid memory. This patch resolves the issue by storing the `driver_data` in a temporary variable before calling `hid_destroy_device()`, and then freeing the `driver_data` after the device is destroyed. Fixes: 0b28cb4bcb17 ("HID: intel-ish-hid: ISH HID client driver") Signed-off-by: Zhang Lixu <lixu.zhang@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-02-19HID: intel-ish-hid: Fix use-after-free issue in hid_ishtp_cl_remove()Zhang Lixu
During the `rmmod` operation for the `intel_ishtp_hid` driver, a use-after-free issue can occur in the hid_ishtp_cl_remove() function. The function hid_ishtp_cl_deinit() is called before ishtp_hid_remove(), which can lead to accessing freed memory or resources during the removal process. Call Trace: ? ishtp_cl_send+0x168/0x220 [intel_ishtp] ? hid_output_report+0xe3/0x150 [hid] hid_ishtp_set_feature+0xb5/0x120 [intel_ishtp_hid] ishtp_hid_request+0x7b/0xb0 [intel_ishtp_hid] hid_hw_request+0x1f/0x40 [hid] sensor_hub_set_feature+0x11f/0x190 [hid_sensor_hub] _hid_sensor_power_state+0x147/0x1e0 [hid_sensor_trigger] hid_sensor_runtime_resume+0x22/0x30 [hid_sensor_trigger] sensor_hub_remove+0xa8/0xe0 [hid_sensor_hub] hid_device_remove+0x49/0xb0 [hid] hid_destroy_device+0x6f/0x90 [hid] ishtp_hid_remove+0x42/0x70 [intel_ishtp_hid] hid_ishtp_cl_remove+0x6b/0xb0 [intel_ishtp_hid] ishtp_cl_device_remove+0x4a/0x60 [intel_ishtp] ... Additionally, ishtp_hid_remove() is a HID level power off, which should occur before the ISHTP level disconnect. This patch resolves the issue by reordering the calls in hid_ishtp_cl_remove(). The function ishtp_hid_remove() is now called before hid_ishtp_cl_deinit(). Fixes: f645a90e8ff7 ("HID: intel-ish-hid: ishtp-hid-client: use helper functions for connection") Signed-off-by: Zhang Lixu <lixu.zhang@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-02-19HID: google: fix unused variable warning under !CONFIG_ACPIYu-Chun Lin
As reported by the kernel test robot, the following warning occurs: >> drivers/hid/hid-google-hammer.c:261:36: warning: 'cbas_ec_acpi_ids' defined but not used [-Wunused-const-variable=] 261 | static const struct acpi_device_id cbas_ec_acpi_ids[] = { | ^~~~~~~~~~~~~~~~ The 'cbas_ec_acpi_ids' array is only used when CONFIG_ACPI is enabled. Wrapping its definition and 'MODULE_DEVICE_TABLE' in '#ifdef CONFIG_ACPI' prevents a compiler warning when ACPI is disabled. Fixes: eb1aac4c8744f75 ("HID: google: add support tablet mode switch for Whiskers") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202501201141.jctFH5eB-lkp@intel.com/ Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-02-19HID: nintendo: fix gencon button events mapRyan McClelland
This fixes the button event map to match the 3-button recommendation as well as the redundant 'z' in the button map events for the Sega MD/Gen 6 Button. Signed-off-by: Ryan McClelland <rymcclel@gmail.com> Reviewed-by: Daniel J. Ogorchock <djogorchock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-02-19cgroup/dmem: Don't open-code css_for_each_descendant_preFriedrich Vock
The current implementation has a bug: If the current css doesn't contain any pool that is a descendant of the "pool" (i.e. when found_descendant == false), then "pool" will point to some unrelated pool. If the current css has a child, we'll overwrite parent_pool with this unrelated pool on the next iteration. Since we can just check whether a pool refers to the same region to determine whether or not it's related, all the additional pool tracking is unnecessary, so just switch to using css_for_each_descendant_pre for traversal. Fixes: b168ed458dde ("kernel/cgroup: Add "dmem" memory accounting cgroup") Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250127152754.21325-1-friedrich.vock@gmx.de Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
2025-02-19cxl: Fix cross-reference in documentation and add deprecation warningAndrew Donnellan
commit 5731d41af924 ("cxl: Deprecate driver") labelled the cxl driver as deprecated and moved the ABI documentation to the obsolete/ subdirectory, but didn't update cxl.rst, causing a warning once ff7ff6eb4f809 ("docs: media: Allow creating cross-references for RC ABI") was merged. Fix the cross-reference, and also add a deprecation warning. Fixes: 5731d41af924 ("cxl: Deprecate driver") Reported-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com> Acked-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250219064807.175107-1-ajd@linux.ibm.com
2025-02-18Merge branch 'net-fix-race-of-rtnl_net_lock-dev_net-dev'Jakub Kicinski
Kuniyuki Iwashima says: ==================== net: Fix race of rtnl_net_lock(dev_net(dev)). Yael Chemla reported that commit 7fb1073300a2 ("net: Hold rtnl_net_lock() in (un)?register_netdevice_notifier_dev_net().") started to trigger KASAN's use-after-free splat. The problem is that dev_net(dev) fetched before rtnl_net_lock() might be different after rtnl_net_lock(). The patch 2 fixes the issue by checking dev_net(dev) after rtnl_net_lock(), and the patch 3 fixes the same potential issue that would emerge once RTNL is removed. v4: https://lore.kernel.org/20250212064206.18159-1-kuniyu@amazon.com v3: https://lore.kernel.org/20250211051217.12613-1-kuniyu@amazon.com v2: https://lore.kernel.org/20250207044251.65421-1-kuniyu@amazon.com v1: https://lore.kernel.org/20250130232435.43622-1-kuniyu@amazon.com ==================== Link: https://patch.msgid.link/20250217191129.19967-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-18dev: Use rtnl_net_dev_lock() in unregister_netdev().Kuniyuki Iwashima
The following sequence is basically illegal when dev was fetched without lookup because dev_net(dev) might be different after holding rtnl_net_lock(): net = dev_net(dev); rtnl_net_lock(net); Let's use rtnl_net_dev_lock() in unregister_netdev(). Note that there is no real bug in unregister_netdev() for now because RTNL protects the scope even if dev_net(dev) is changed before/after RTNL. Fixes: 00fb9823939e ("dev: Hold per-netns RTNL in (un)?register_netdev().") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250217191129.19967-4-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-18net: Fix dev_net(dev) race in unregister_netdevice_notifier_dev_net().Kuniyuki Iwashima
After the cited commit, dev_net(dev) is fetched before holding RTNL and passed to __unregister_netdevice_notifier_net(). However, dev_net(dev) might be different after holding RTNL. In the reported case [0], while removing a VF device, its netns was being dismantled and the VF was moved to init_net. So the following sequence is basically illegal when dev was fetched without lookup: net = dev_net(dev); rtnl_net_lock(net); Let's use a new helper rtnl_net_dev_lock() to fix the race. It fetches dev_net_rcu(dev), bumps its net->passive, and checks if dev_net_rcu(dev) is changed after rtnl_net_lock(). [0]: BUG: KASAN: slab-use-after-free in notifier_call_chain (kernel/notifier.c:75 (discriminator 2)) Read of size 8 at addr ffff88810cefb4c8 by task test-bridge-lag/21127 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:123) print_report (mm/kasan/report.c:379 mm/kasan/report.c:489) kasan_report (mm/kasan/report.c:604) notifier_call_chain (kernel/notifier.c:75 (discriminator 2)) call_netdevice_notifiers_info (net/core/dev.c:2011) unregister_netdevice_many_notify (net/core/dev.c:11551) unregister_netdevice_queue (net/core/dev.c:11487) unregister_netdev (net/core/dev.c:11635) mlx5e_remove (drivers/net/ethernet/mellanox/mlx5/core/en_main.c:6552 drivers/net/ethernet/mellanox/mlx5/core/en_main.c:6579) mlx5_core auxiliary_bus_remove (drivers/base/auxiliary.c:230) device_release_driver_internal (drivers/base/dd.c:1275 drivers/base/dd.c:1296) bus_remove_device (./include/linux/kobject.h:193 drivers/base/base.h:73 drivers/base/bus.c:583) device_del (drivers/base/power/power.h:142 drivers/base/core.c:3855) mlx5_rescan_drivers_locked (./include/linux/auxiliary_bus.h:241 drivers/net/ethernet/mellanox/mlx5/core/dev.c:333 drivers/net/ethernet/mellanox/mlx5/core/dev.c:535 drivers/net/ethernet/mellanox/mlx5/core/dev.c:549) mlx5_core mlx5_unregister_device (drivers/net/ethernet/mellanox/mlx5/core/dev.c:468) mlx5_core mlx5_uninit_one (./include/linux/instrumented.h:68 ./include/asm-generic/bitops/instrumented-non-atomic.h:141 drivers/net/ethernet/mellanox/mlx5/core/main.c:1563) mlx5_core remove_one (drivers/net/ethernet/mellanox/mlx5/core/main.c:965 drivers/net/ethernet/mellanox/mlx5/core/main.c:2019) mlx5_core pci_device_remove (./include/linux/pm_runtime.h:129 drivers/pci/pci-driver.c:475) device_release_driver_internal (drivers/base/dd.c:1275 drivers/base/dd.c:1296) unbind_store (drivers/base/bus.c:245) kernfs_fop_write_iter (fs/kernfs/file.c:338) vfs_write (fs/read_write.c:587 (discriminator 1) fs/read_write.c:679 (discriminator 1)) ksys_write (fs/read_write.c:732) do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f6a4d5018b7 Fixes: 7fb1073300a2 ("net: Hold rtnl_net_lock() in (un)?register_netdevice_notifier_dev_net().") Reported-by: Yael Chemla <ychemla@nvidia.com> Closes: https://lore.kernel.org/netdev/146eabfe-123c-4970-901e-e961b4c09bc3@nvidia.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250217191129.19967-3-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-18net: Add net_passive_inc() and net_passive_dec().Kuniyuki Iwashima
net_drop_ns() is NULL when CONFIG_NET_NS is disabled. The next patch introduces a function that increments and decrements net->passive. As a prep, let's rename and export net_free() to net_passive_dec() and add net_passive_inc(). Suggested-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/netdev/CANn89i+oUCt2VGvrbrweniTendZFEh+nwS=uonc004-aPkWy-Q@mail.gmail.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250217191129.19967-2-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-18net: pse-pd: pd692x0: Fix power limit retrievalKory Maincent
Fix incorrect data offset read in the pd692x0_pi_get_pw_limit callback. The issue was previously unnoticed as it was only used by the regulator API and not thoroughly tested, since the PSE is mainly controlled via ethtool. The function became actively used by ethtool after commit 3e9dbfec4998 ("net: pse-pd: Split ethtool_get_status into multiple callbacks"), which led to the discovery of this issue. Fix it by using the correct data offset. Fixes: a87e699c9d33 ("net: pse-pd: pd692x0: Enhance with new current limit and voltage read callbacks") Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20250217134812.1925345-1-kory.maincent@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-18MAINTAINERS: trim the GVE entryJakub Kicinski
We requested in the past that GVE patches coming out of Google should be submitted only by GVE maintainers. There were too many patches posted which didn't follow the subsystem guidance. Recently Joshua was added to maintainers, but even tho he was asked to follow the netdev "FAQ" in the past [1] he does not follow the local customs. It is not reasonable for a person who hasn't read the maintainer entry for the subsystem to be a driver maintainer. We can re-add once Joshua does some on-list reviews to prove the fluency with the upstream process. Link: https://lore.kernel.org/20240610172720.073d5912@kernel.org # [1] Link: https://patch.msgid.link/20250215162646.2446559-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-18gve: set xdp redirect target only when it is availableJoshua Washington
Before this patch the NETDEV_XDP_ACT_NDO_XMIT XDP feature flag is set by default as part of driver initialization, and is never cleared. However, this flag differs from others in that it is used as an indicator for whether the driver is ready to perform the ndo_xdp_xmit operation as part of an XDP_REDIRECT. Kernel helpers xdp_features_(set|clear)_redirect_target exist to convey this meaning. This patch ensures that the netdev is only reported as a redirect target when XDP queues exist to forward traffic. Fixes: 39a7f4aa3e4a ("gve: Add XDP REDIRECT support for GQI-QPL format") Cc: stable@vger.kernel.org Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by: Jeroen de Borst <jeroendb@google.com> Signed-off-by: Joshua Washington <joshwash@google.com> Link: https://patch.msgid.link/20250214224417.1237818-1-joshwash@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-18scsi: ufs: core: Fix ufshcd_is_ufs_dev_busy() and ufshcd_eh_timed_out()Bart Van Assche
ufshcd_is_ufs_dev_busy(), ufshcd_print_host_state() and ufshcd_eh_timed_out() are used in both modes (legacy mode and MCQ mode). hba->outstanding_reqs only represents the outstanding requests in legacy mode. Hence, change hba->outstanding_reqs into scsi_host_busy(hba->host) in these functions. Fixes: eacb139b77ff ("scsi: ufs: core: mcq: Enable multi-circular queue") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20250214224352.3025151-1-bvanassche@acm.org Reviewed-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-07-15 17:42:51 +0000