summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-02-16Merge tag 'driver-core-6.14-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core api addition from Greg KH: "Here is a driver core new api for 6.14-rc3 that is being added to allow platform devices from stop being abused. It adds a new 'faux_device' structure and bus and api to allow almost a straight or simpler conversion from platform devices that were not really a platform device. It also comes with a binding for rust, with an example driver in rust showing how it's used. I'm adding this now so that the patches that convert the different drivers and subsystems can all start flowing into linux-next now through their different development trees, in time for 6.15-rc1. We have a number that are already reviewed and tested, but adding those conversions now doesn't seem right. For now, no one is using this, and it passes all build tests from 0-day and linux-next, so all should be good" * tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: rust/kernel: Add faux device bindings driver core: add a faux bus for use when a simple device/bus is needed
2025-02-16Merge tag 'tty-6.14-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial driver fixes from Greg KH: "Here are some small serial driver fixes for some reported problems. Nothing major, just: - sc16is7xx irq check fix - 8250 fifo underflow fix - serial_port and 8250 iotype fixes Most of these have been in linux-next already, and all have passed 0-day testing" * tag 'tty-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250: Fix fifo underflow on flush serial: 8250_pnp: Remove unneeded ->iotype assignment serial: 8250_platform: Remove unneeded ->iotype assignment serial: 8250_of: Remove unneeded ->iotype assignment serial: port: Make ->iotype validation global in __uart_read_properties() serial: port: Always update ->iotype in __uart_read_properties() serial: port: Assign ->iotype correctly when ->iobase is set serial: sc16is7xx: Fix IRQ number check behavior
2025-02-16Merge tag 'usb-6.14-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB driver fixes, and new device ids, for 6.14-rc3. Lots of tiny stuff for reported problems, including: - new device ids and quirks - usb hub crash fix found by syzbot - dwc2 driver fix - dwc3 driver fixes - uvc gadget driver fix - cdc-acm driver fixes for a variety of different issues - other tiny bugfixes Almost all of these have been in linux-next this week, and all have passed 0-day testing" * tag 'usb-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits) usb: typec: tcpm: PSSourceOffTimer timeout in PR_Swap enters ERROR_RECOVERY usb: roles: set switch registered flag early on usb: gadget: uvc: Fix unstarted kthread worker USB: quirks: add USB_QUIRK_NO_LPM quirk for Teclast dist usb: gadget: core: flush gadget workqueue after device removal USB: gadget: f_midi: f_midi_complete to call queue_work usb: core: fix pipe creation for get_bMaxPacketSize0 usb: dwc3: Fix timeout issue during controller enter/exit from halt state USB: Add USB_QUIRK_NO_LPM quirk for sony xperia xz1 smartphone USB: cdc-acm: Fill in Renesas R-Car D3 USB Download mode quirk usb: cdc-acm: Fix handling of oversized fragments usb: cdc-acm: Check control transfer buffer size before access usb: xhci: Restore xhci_pci support for Renesas HCs USB: pci-quirks: Fix HCCPARAMS register error for LS7A EHCI USB: serial: option: drop MeiG Smart defines USB: serial: option: fix Telit Cinterion FN990A name USB: serial: option: add Telit Cinterion FN990B compositions USB: serial: option: add MeiG Smart SLM828 usb: gadget: f_midi: fix MIDI Streaming descriptor lengths usb: dwc2: gadget: remove of_node reference upon udc_stop ...
2025-02-16Merge tag 'irq_urgent_for_v6.14_rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq Kconfig cleanup from Borislav Petkov: - Remove an unused config item GENERIC_PENDING_IRQ_CHIPFLAGS * tag 'irq_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Remove unused CONFIG_GENERIC_PENDING_IRQ_CHIPFLAGS
2025-02-16Merge tag 'perf_urgent_for_v6.14_rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 perf fixes from Borislav Petkov: - Explicitly clear DEBUGCTL.LBR to prevent LBRs continuing being enabled after handoff to the OS - Check CPUID(0x23) leaf and subleafs presence properly - Remove the PEBS-via-PT feature from being supported on hybrid systems - Fix perf record/top default commands on systems without a raw PMU registered * tag 'perf_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Ensure LBRs are disabled when a CPU is starting perf/x86/intel: Fix ARCH_PERFMON_NUM_COUNTER_LEAF perf/x86/intel: Clean up PEBS-via-PT on hybrid perf/x86/rapl: Fix the error checking order
2025-02-16Merge tag 'sched_urgent_for_v6.14_rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Borislav Petkov: - Clarify what happens when a task is woken up from the wake queue and make clear its removal from that queue is atomic * tag 'sched_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Clarify wake_up_q()'s write to task->wake_q.next
2025-02-16Merge tag 'objtool_urgent_for_v6.14_rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fixes from Borislav Petkov: - Move a warning about a lld.ld breakage into the verbose setting as said breakage has been fixed in the meantime - Teach objtool to ignore dangling jump table entries added by Clang * tag 'objtool_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Move dodgy linker warn to verbose objtool: Ignore dangling jump table entries
2025-02-16Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "ARM: - Large set of fixes for vector handling, especially in the interactions between host and guest state. This fixes a number of bugs affecting actual deployments, and greatly simplifies the FP/SIMD/SVE handling. Thanks to Mark Rutland for dealing with this thankless task. - Fix an ugly race between vcpu and vgic creation/init, resulting in unexpected behaviours - Fix use of kernel VAs at EL2 when emulating timers with nVHE - Small set of pKVM improvements and cleanups x86: - Fix broken SNP support with KVM module built-in, ensuring the PSP module is initialized before KVM even when the module infrastructure cannot be used to order initcalls - Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being emulated by KVM to fix a NULL pointer dereference - Enter guest mode (L2) from KVM's perspective before initializing the vCPU's nested NPT MMU so that the MMU is properly tagged for L2, not L1 - Load the guest's DR6 outside of the innermost .vcpu_run() loop, as the guest's value may be stale if a VM-Exit is handled in the fastpath" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits) x86/sev: Fix broken SNP support with KVM module built-in KVM: SVM: Ensure PSP module is initialized if KVM module is built-in crypto: ccp: Add external API interface for PSP module initialization KVM: arm64: vgic: Hoist SGI/PPI alloc from vgic_init() to kvm_create_vgic() KVM: arm64: timer: Drop warning on failed interrupt signalling KVM: arm64: Fix alignment of kvm_hyp_memcache allocations KVM: arm64: Convert timer offset VA when accessed in HYP code KVM: arm64: Simplify warning in kvm_arch_vcpu_load_fp() KVM: arm64: Eagerly switch ZCR_EL{1,2} KVM: arm64: Mark some header functions as inline KVM: arm64: Refactor exit handlers KVM: arm64: Refactor CPTR trap deactivation KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN KVM: arm64: Remove VHE host restore of CPACR_EL1.ZEN KVM: arm64: Remove host FPSIMD saving for non-protected KVM KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop KVM: nSVM: Enter guest mode before initializing nested NPT MMU KVM: selftests: Add CPUID tests for Hyper-V features that need in-kernel APIC KVM: selftests: Manage CPUID array in Hyper-V CPUID test's core helper ...
2025-02-16Merge tag 'mips-fixes_6.14_1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: "Fix for o32 ptrace/get_syscall_info" * tag 'mips-fixes_6.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: fix mips_get_syscall_arg() for o32 MIPS: Export syscall stack arguments properly for remote use
2025-02-15Merge tag 'devicetree-fixes-for-6.14-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Add bindings for QCom QCS8300 clocks, QCom SAR2130P qfprom, and powertip,{st7272|hx8238a} displays - Fix compatible for TI am62a7 dss - Add a kunit test for __of_address_resource_bounds() * tag 'devicetree-fixes-for-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: display: Add powertip,{st7272|hx8238a} as DT Schema description dt-bindings: nvmem: qcom,qfprom: Add SAR2130P compatible dt-bindings: display: ti: Fix compatible for am62a7 dss of: address: Add kunit test for __of_address_resource_bounds() dt-bindings: clock: qcom: Add QCS8300 video clock controller dt-bindings: clock: qcom: Add CAMCC clocks for QCS8300 dt-bindings: clock: qcom: Add GPU clocks for QCS8300
2025-02-15Merge tag 'uml-for-linus-6.14-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux Pull UML fixes from Richard Weinberger: - Align signal stack correctly - Convert to raw spinlocks where needed (irq and virtio) - FPU related fixes * tag 'uml-for-linus-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: um: convert irq_lock to raw spinlock um: virtio_uml: use raw spinlock um: virt-pci: don't use kmalloc() um: fix execve stub execution on old host OSs um: properly align signal stack on x86_64 um: avoid copying FP state from init_task um: add back support for FXSAVE registers
2025-02-15Merge tag 'trace-ring-buffer-v6.14-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull trace ring buffer fixes from Steven Rostedt: - Enable resize on mmap() error When a process mmaps a ring buffer, its size is locked and resizing is disabled. But if the user passes in a wrong parameter, the mmap() can fail after the resize was disabled and the mmap() exits with error without reenabling the ring buffer resize. This prevents the ring buffer from ever being resized after that. Reenable resizing of the ring buffer on mmap() error. - Have resizing return proper error and not always -ENOMEM If the ring buffer is mmapped by one task and another task tries to resize the buffer it will error with -ENOMEM. This is confusing to the user as there may be plenty of memory available. Have it return the error that actually happens (in this case -EBUSY) where the user can understand why the resize failed. - Test the sub-buffer array to validate persistent memory buffer On boot up, the initialization of the persistent memory buffer will do a validation check to see if the content of the data is valid, and if so, it will use the memory as is, otherwise it re-initializes it. There's meta data in this persistent memory that keeps track of which sub-buffer is the reader page and an array that states the order of the sub-buffers. The values in this array are indexes into the sub-buffers. The validator checks to make sure that all the entries in the array are within the sub-buffer list index, but it does not check for duplications. While working on this code, the array got corrupted and had duplicates, where not all the sub-buffers were accounted for. This passed the validator as all entries were valid, but the link list was incorrect and could have caused a crash. The corruption only produced incorrect data, but it could have been more severe. To fix this, create a bitmask that covers all the sub-buffer indexes and set it to all zeros. While iterating the array checking the values of the array content, have it set a bit corresponding to the index in the array. If the bit was already set, then it is a duplicate and mark the buffer as invalid and reset it. - Prevent mmap()ing persistent ring buffer The persistent ring buffer uses vmap() to map the persistent memory. Currently, the mmap() logic only uses virt_to_page() to get the page from the ring buffer memory and use that to map to user space. This works because a normal ring buffer uses alloc_page() to allocate its memory. But because the persistent ring buffer use vmap() it causes a kernel crash. Fixing this to work with vmap() is not hard, but since mmap() on persistent memory buffers never worked, just have the mmap() return -ENODEV (what was returned before mmap() for persistent memory ring buffers, as they never supported mmap. Normal buffers will still allow mmap(). Implementing mmap() for persistent memory ring buffers can wait till the next merge window. - Fix polling on persistent ring buffers There's a "buffer_percent" option (default set to 50), that is used to have reads of the ring buffer binary data block until the buffer fills to that percentage. The field "pages_touched" is incremented every time a new sub-buffer has content added to it. This field is used in the calculations to determine the amount of content is in the buffer and if it exceeds the "buffer_percent" then it will wake the task polling on the buffer. As persistent ring buffers can be created by the content from a previous boot, the "pages_touched" field was not updated. This means that if a task were to poll on the persistent buffer, it would block even if the buffer was completely full. It would block even if the "buffer_percent" was zero, because with "pages_touched" as zero, it would be calculated as the buffer having no content. Update pages_touched when initializing the persistent ring buffer from a previous boot. * tag 'trace-ring-buffer-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: ring-buffer: Update pages_touched to reflect persistent buffer content tracing: Do not allow mmap() of persistent ring buffer ring-buffer: Validate the persistent meta data subbuf array tracing: Have the error of __tracing_resize_ring_buffer() passed to user ring-buffer: Unlock resize on mmap error
2025-02-15drm/msm/dsi/phy: Do not overwite PHY_CMN_CLK_CFG1 when choosing bitclk sourceKrzysztof Kozlowski
PHY_CMN_CLK_CFG1 register has four fields being used in the driver: DSI clock divider, source of bitclk and two for enabling the DSI PHY PLL clocks. dsi_7nm_set_usecase() sets only the source of bitclk, so should leave all other bits untouched. Use newly introduced dsi_pll_cmn_clk_cfg1_update() to update respective bits without overwriting the rest. While shuffling the code, define and use PHY_CMN_CLK_CFG1 bitfields to make the code more readable and obvious. Fixes: 1ef7c99d145c ("drm/msm/dsi: add support for 7nm DSI PHY/PLL") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/637380/ Link: https://lore.kernel.org/r/20250214-drm-msm-phy-pll-cfg-reg-v3-3-0943b850722c@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2025-02-15drm/msm/dsi/phy: Protect PHY_CMN_CLK_CFG1 against clock driverKrzysztof Kozlowski
PHY_CMN_CLK_CFG1 register is updated by the PHY driver and by a mux clock from Common Clock Framework: devm_clk_hw_register_mux_parent_hws(). There could be a path leading to concurrent and conflicting updates between PHY driver and clock framework, e.g. changing the mux and enabling PLL clocks. Add dedicated spinlock to be sure all PHY_CMN_CLK_CFG1 updates are synchronized. While shuffling the code, define and use PHY_CMN_CLK_CFG1 bitfields to make the code more readable and obvious. Fixes: 1ef7c99d145c ("drm/msm/dsi: add support for 7nm DSI PHY/PLL") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/637378/ Link: https://lore.kernel.org/r/20250214-drm-msm-phy-pll-cfg-reg-v3-2-0943b850722c@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2025-02-15drm/msm/dsi/phy: Protect PHY_CMN_CLK_CFG0 updated from driver sideKrzysztof Kozlowski
PHY_CMN_CLK_CFG0 register is updated by the PHY driver and by two divider clocks from Common Clock Framework: devm_clk_hw_register_divider_parent_hw(). Concurrent access by the clocks side is protected with spinlock, however driver's side in restoring state is not. Restoring state is called from msm_dsi_phy_enable(), so there could be a path leading to concurrent and conflicting updates with clock framework. Add missing lock usage on the PHY driver side, encapsulated in its own function so the code will be still readable. While shuffling the code, define and use PHY_CMN_CLK_CFG0 bitfields to make the code more readable and obvious. Fixes: 1ef7c99d145c ("drm/msm/dsi: add support for 7nm DSI PHY/PLL") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/637376/ Link: https://lore.kernel.org/r/20250214-drm-msm-phy-pll-cfg-reg-v3-1-0943b850722c@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2025-02-15drm/msm/dpu: Drop extraneous return in dpu_crtc_reassign_planes()Jessica Zhang
Drop extra return at the end of dpu_crtc_reassign_planes() Fixes: 774bcfb73176 ("drm/msm/dpu: add support for virtual planes") Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/631565/ Link: https://lore.kernel.org/r/20250108-virtual-planes-fixes-v1-2-420cb36df94a@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2025-02-15drm/msm/dpu: Don't leak bits_per_component into random DSC_ENC fieldsMarijn Suijten
What used to be the input_10_bits boolean - feeding into the lowest bit of DSC_ENC - on MSM downstream turned into an accidental OR with the full bits_per_component number when it was ported to the upstream kernel. On typical bpc=8 setups we don't notice this because line_buf_depth is always an odd value (it contains bpc+1) and will also set the 4th bit after left-shifting by 3 (hence this |= bits_per_component is a no-op). Now that guards are being removed to allow more bits_per_component values besides 8 (possible since commit 49fd30a7153b ("drm/msm/dsi: use DRM DSC helpers for DSC setup")), a bpc of 10 will instead clash with the 5th bit which is convert_rgb. This is "fortunately" also always set to true by MSM's dsi_populate_dsc_params() already, but once a bpc of 12 starts being used it'll write into simple_422 which is normally false. To solve all these overlaps, simply replicate downstream code and only set this lowest bit if bits_per_component is equal to 10. It is unclear why DSC requires this only for bpc=10 but not bpc=12, and also notice that this lowest bit wasn't set previously despite having a panel and patch on the list using it without any mentioned issues. Fixes: c110cfd1753e ("drm/msm/disp/dpu1: Add support for DSC") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/636311/ Link: https://lore.kernel.org/r/20250211-dsc-10-bit-v1-1-1c85a9430d9a@somainline.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2025-02-15drm/msm/dpu: Disable dither in phys encoder cleanupJessica Zhang
Disable pingpong dither in dpu_encoder_helper_phys_cleanup(). This avoids the issue where an encoder unknowingly uses dither after reserving a pingpong block that was previously bound to an encoder that had enabled dither. Cc: stable@vger.kernel.org Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Closes: https://lore.kernel.org/all/jr7zbj5w7iq4apg3gofuvcwf4r2swzqjk7sshwcdjll4mn6ctt@l2n3qfpujg3q/ Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Fixes: 3c128638a07d ("drm/msm/dpu: add support for dither block in display") Patchwork: https://patchwork.freedesktop.org/patch/636517/ Link: https://lore.kernel.org/r/20250211-dither-disable-v1-1-ac2cb455f6b9@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2025-02-15drm/msm/dpu: Fix uninitialized variableEthan Carter Edwards
There is a possibility for an uninitialized *ret* variable to be returned in some code paths. Fix this by initializing *ret* to 0. Addresses-Coverity-ID: 1642546 ("Uninitialized scalar variable") Fixes: 774bcfb73176 ("drm/msm/dpu: add support for virtual planes") Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/636201/ Link: https://lore.kernel.org/r/20250209-dpu-v2-1-114dfd4ebefd@ethancedwards.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2025-02-15drm/msm/dp: account for widebus and yuv420 during mode validationAbhinav Kumar
Widebus allows the DP controller to operate in 2 pixel per clock mode. The mode validation logic validates the mode->clock against the max DP pixel clock. However the max DP pixel clock limit assumes widebus is already enabled. Adjust the mode validation logic to only compare the adjusted pixel clock which accounts for widebus against the max DP pixel clock. Also fix the mode validation logic for YUV420 modes as in that case as well, only half the pixel clock is needed. Cc: stable@vger.kernel.org Fixes: 757a2f36ab09 ("drm/msm/dp: enable widebus feature for display port") Fixes: 6db6e5606576 ("drm/msm/dp: change clock related programming for YUV420 over DP") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dale Whinham <daleyo@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/635789/ Link: https://lore.kernel.org/r/20250206-dp-widebus-fix-v2-1-cb89a0313286@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2025-02-15drm/msm/dpu: correct LM pairing for SM6150Dmitry Baryshkov
The SM6150 platform doesn't have 3DMux (MERGE_3D) block, so it can not split the screen between two LMs. Drop lm_pair fields as they don't make sense for this platform. Suggested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Fixes: cb2f9144693b ("drm/msm/dpu: Add SM6150 support") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/629377/ Link: https://lore.kernel.org/r/20241217-dpu-fix-sm6150-v2-1-9acc8f5addf3@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2025-02-15drm/msm/dpu: enable DPU_WB_INPUT_CTRL for DPU 5.xDmitry Baryshkov
Several DPU 5.x platforms are supposed to be using DPU_WB_INPUT_CTRL, to bind WB and PINGPONG blocks, but they do not. Change those platforms to use WB_SM8250_MASK, which includes that bit. Fixes: 1f5bcc4316b3 ("drm/msm/dpu: enable writeback on SC8108X") Fixes: ab2b03d73a66 ("drm/msm/dpu: enable writeback on SM6125") Fixes: 47cebb740a83 ("drm/msm/dpu: enable writeback on SM8150") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/628876/ Link: https://lore.kernel.org/r/20241214-dpu-drop-features-v1-2-988f0662cb7e@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2025-02-15drm/msm/dpu: skip watchdog timer programming through TOP on >= SM8450Dmitry Baryshkov
The SM8450 and later chips have DPU_MDP_PERIPH_0_REMOVED feature bit set, which means that those platforms have dropped some of the registers, including the WD TIMER-related ones. Stop providing the callback to program WD timer on those platforms. Fixes: 100d7ef6995d ("drm/msm/dpu: add support for SM8450") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/628874/ Link: https://lore.kernel.org/r/20241214-dpu-drop-features-v1-1-988f0662cb7e@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2025-02-15ring-buffer: Update pages_touched to reflect persistent buffer contentSteven Rostedt
The pages_touched field represents the number of subbuffers in the ring buffer that have content that can be read. This is used in accounting of "dirty_pages" and "buffer_percent" to allow the user to wait for the buffer to be filled to a certain amount before it reads the buffer in blocking mode. The persistent buffer never updated this value so it was set to zero, and this accounting would take it as it had no content. This would cause user space to wait for content even though there's enough content in the ring buffer that satisfies the buffer_percent. Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Vincent Donnefort <vdonnefort@google.com> Link: https://lore.kernel.org/20250214123512.0631436e@gandalf.local.home Fixes: 5f3b6e839f3ce ("ring-buffer: Validate boot range memory events") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-02-15tracing: Do not allow mmap() of persistent ring bufferSteven Rostedt
When trying to mmap a trace instance buffer that is attached to reserve_mem, it would crash: BUG: unable to handle page fault for address: ffffe97bd00025c8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 2862f3067 P4D 2862f3067 PUD 0 Oops: Oops: 0000 [#1] PREEMPT_RT SMP PTI CPU: 4 UID: 0 PID: 981 Comm: mmap-rb Not tainted 6.14.0-rc2-test-00003-g7f1a5e3fbf9e-dirty #233 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:validate_page_before_insert+0x5/0xb0 Code: e2 01 89 d0 c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 <48> 8b 46 08 a8 01 75 67 66 90 48 89 f0 8b 50 34 85 d2 74 76 48 89 RSP: 0018:ffffb148c2f3f968 EFLAGS: 00010246 RAX: ffff9fa5d3322000 RBX: ffff9fa5ccff9c08 RCX: 00000000b879ed29 RDX: ffffe97bd00025c0 RSI: ffffe97bd00025c0 RDI: ffff9fa5ccff9c08 RBP: ffffb148c2f3f9f0 R08: 0000000000000004 R09: 0000000000000004 R10: 0000000000000000 R11: 0000000000000200 R12: 0000000000000000 R13: 00007f16a18d5000 R14: ffff9fa5c48db6a8 R15: 0000000000000000 FS: 00007f16a1b54740(0000) GS:ffff9fa73df00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffe97bd00025c8 CR3: 00000001048c6006 CR4: 0000000000172ef0 Call Trace: <TASK> ? __die_body.cold+0x19/0x1f ? __die+0x2e/0x40 ? page_fault_oops+0x157/0x2b0 ? search_module_extables+0x53/0x80 ? validate_page_before_insert+0x5/0xb0 ? kernelmode_fixup_or_oops.isra.0+0x5f/0x70 ? __bad_area_nosemaphore+0x16e/0x1b0 ? bad_area_nosemaphore+0x16/0x20 ? do_kern_addr_fault+0x77/0x90 ? exc_page_fault+0x22b/0x230 ? asm_exc_page_fault+0x2b/0x30 ? validate_page_before_insert+0x5/0xb0 ? vm_insert_pages+0x151/0x400 __rb_map_vma+0x21f/0x3f0 ring_buffer_map+0x21b/0x2f0 tracing_buffers_mmap+0x70/0xd0 __mmap_region+0x6f0/0xbd0 mmap_region+0x7f/0x130 do_mmap+0x475/0x610 vm_mmap_pgoff+0xf2/0x1d0 ksys_mmap_pgoff+0x166/0x200 __x64_sys_mmap+0x37/0x50 x64_sys_call+0x1670/0x1d70 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f The reason was that the code that maps the ring buffer pages to user space has: page = virt_to_page((void *)cpu_buffer->subbuf_ids[s]); And uses that in: vm_insert_pages(vma, vma->vm_start, pages, &nr_pages); But virt_to_page() does not work with vmap()'d memory which is what the persistent ring buffer has. It is rather trivial to allow this, but for now just disable mmap() of instances that have their ring buffer from the reserve_mem option. If an mmap() is performed on a persistent buffer it will return -ENODEV just like it would if the .mmap field wasn't defined in the file_operations structure. Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Vincent Donnefort <vdonnefort@google.com> Link: https://lore.kernel.org/20250214115547.0d7287d3@gandalf.local.home Fixes: 9b7bdf6f6ece6 ("tracing: Have trace_printk not use binary prints if boot buffer") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-02-15Merge tag 'i2c-for-6.14-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "MAINTAINERS maintenance. Changed email, added entry, deleted entry falling back to a generic one" * tag 'i2c-for-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: Add maintainer for Qualcomm's I2C GENI driver MAINTAINERS: delete entry for AXXIA I2C MAINTAINERS: Use my kernel.org address for I2C ACPI work
2025-02-15Merge tag 's390-6.14-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Fix isolated VFs handling by verifying that a VF’s parent PF is locally owned before registering it in an existing PCI domain - Disable arch_test_bit() optimization for PROFILE_ALL_BRANCHES to workaround gcc failure in handling __builtin_constant_p() in this case - Fix CHPID "configure" attribute caching in CIO by not updating the cache when SCLP returns no data, ensuring consistent sysfs output - Remove CONFIG_LSM from default configs and rely on defaults, which enables BPF LSM hook * tag 's390-6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: Fix handling of isolated VFs s390/pci: Pull search for parent PF out of zpci_iov_setup_virtfn() s390/bitops: Disable arch_test_bit() optimization for PROFILE_ALL_BRANCHES s390/cio: Fix CHPID "configure" attribute caching s390/configs: Remove CONFIG_LSM
2025-02-16modpost: Fix a few typos in a commentUwe Kleine-König
Namely: s/becasue/because/ and s/wiht/with/ plus an added article. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2025-02-16kbuild: userprogs: fix bitsize and target detection on clangThomas Weißschuh
scripts/Makefile.clang was changed in the linked commit to move --target from KBUILD_CFLAGS to KBUILD_CPPFLAGS, as that generally has a broader scope. However that variable is not inspected by the userprogs logic, breaking cross compilation on clang. Use both variables to detect bitsize and target arguments for userprogs. Fixes: feb843a469fb ("kbuild: add $(CLANG_FLAGS) to KBUILD_CPPFLAGS") Cc: stable@vger.kernel.org Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2025-02-15Merge tag 'rust-fixes-6.14-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux Pull rust fixes from Miguel Ojeda: - Fix objtool warning due to future Rust 1.85.0 (to be released in a few days) - Clean future Rust 1.86.0 (to be released 2025-04-03) Clippy warning * tag 'rust-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: rust: rbtree: fix overindented list item objtool/rust: add one more `noreturn` Rust function
2025-02-15tegra210-adma: fix 32-bit x86 buildLinus Torvalds
The Tegra210 Audio DMA controller driver did a plain divide: page_no = (res_page->start - res_base->start) / cdata->ch_base_offset; which causes problems on 32-bit x86 configurations that have 64-bit resource sizes: x86_64-linux-ld: drivers/dma/tegra210-adma.o: in function `tegra_adma_probe': tegra210-adma.c:(.text+0x1322): undefined reference to `__udivdi3' because gcc doesn't generate the trivial code for a 64-by-32 divide, turning it into a function call to do a full 64-by-64 divide. And the kernel intentionally doesn't provide that helper function, because 99% of the time all you want is the narrower version. Of course, tegra210 is a 64-bit architecture and the 32-bit x86 build is purely for build testing, so this really is just about build coverage failure. But build coverage is good. Side note: div_u64() would be suboptimal if you actually have a 32-bit resource_t, so our "helper" for divides are admittedly making it harder than it should be to generate good code for all the possible cases. At some point, I'll consider 32-bit x86 so entirely legacy that I can't find it in myself to care any more, and we'll just add the __udivdi3 library function. But for now, the right thing to do is to use "div_u64()" to show that you know that you are doing the simpler divide with a 32-bit number. And the build error enforces that. While fixing the build issue, also check for division-by-zero, and for overflow. Which hopefully cannot happen on real production hardware, but the value of 'ch_base_offset' can definitely be zero in other places. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-02-15drm/msm: Avoid rounding up to one jiffyRob Clark
If userspace is trying to achieve a timeout of zero, let 'em have it. Only round up if the timeout is greater than zero. Fixes: 4969bccd5f4e ("drm/msm: Avoid rounding down to zero jiffies") Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/632264/
2025-02-15drm/msm/a6xx: Only print the GMU firmware version onceKonrad Dybcio
We only fetch it once from userland, so let's also only notify the user once and not on every runtime resume. As you can notice by the tags chain, more than one user found this annoying. Reported-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz> Suggested-by: Abel Vesa <abel.vesa@linaro.org> Suggested-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/637062/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2025-02-15net/sched: cls_api: fix error handling causing NULL dereferencePierre Riteau
tcf_exts_miss_cookie_base_alloc() calls xa_alloc_cyclic() which can return 1 if the allocation succeeded after wrapping. This was treated as an error, with value 1 returned to caller tcf_exts_init_ex() which sets exts->actions to NULL and returns 1 to caller fl_change(). fl_change() treats err == 1 as success, calling tcf_exts_validate_ex() which calls tcf_action_init() with exts->actions as argument, where it is dereferenced. Example trace: BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 114 PID: 16151 Comm: handler114 Kdump: loaded Not tainted 5.14.0-503.16.1.el9_5.x86_64 #1 RIP: 0010:tcf_action_init+0x1f8/0x2c0 Call Trace: tcf_action_init+0x1f8/0x2c0 tcf_exts_validate_ex+0x175/0x190 fl_change+0x537/0x1120 [cls_flower] Fixes: 80cd22c35c90 ("net/sched: cls_api: Support hardware miss to tc action") Signed-off-by: Pierre Riteau <pierre@stackhpc.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250213223610.320278-1-pierre@stackhpc.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-15Merge tag 'gpio-fixes-for-v6.14-rc3-take2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix interrupt handling issues in gpio-bcm-kona - add an ACPI quirk for Acer Nitro ANV14 fixing an issue with spurious wake up events - add missing return value checks to gpio-stmpe - fix a crash in error path in gpiochip_get_ngpios() * tag 'gpio-fixes-for-v6.14-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpiolib: Fix crash on error in gpiochip_get_ngpios() gpio: stmpe: Check return value of stmpe_reg_read in stmpe_gpio_irq_sync_unlock gpiolib: acpi: Add a quirk for Acer Nitro ANV14 gpio: bcm-kona: Add missing newline to dev_err format string gpio: bcm-kona: Make sure GPIO bits are unlocked when requesting IRQ gpio: bcm-kona: Fix GPIO lock/unlock for banks above bank 0
2025-02-15io_uring: prevent opcode speculationPavel Begunkov
sqe->opcode is used for different tables, make sure we santitise it against speculations. Cc: stable@vger.kernel.org Fixes: d3656344fea03 ("io_uring: add lookup table for various opcode needs") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Reviewed-by: Li Zetao <lizetao1@huawei.com> Link: https://lore.kernel.org/r/7eddbf31c8ca0a3947f8ed98271acc2b4349c016.1739568408.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-02-15kbuild: fix linux-headers package build when $(CC) cannot link userspaceMasahiro Yamada
Since commit 5f73e7d0386d ("kbuild: refactor cross-compiling linux-headers package"), the linux-headers Debian package fails to build when $(CC) cannot build userspace applications, for example, when using toolchains installed by the 0day bot. The host programs in the linux-headers package should be rebuilt using the disto's cross-compiler, ${DEB_HOST_GNU_TYPE}-gcc instead of $(CC). Hence, the variable 'CC' must be expanded in this shell script instead of in the top-level Makefile. Commit f354fc88a72a ("kbuild: install-extmod-build: add missing quotation marks for CC variable") was not a correct fix because CC="ccache gcc" should be unrelated when rebuilding userspace tools. Fixes: 5f73e7d0386d ("kbuild: refactor cross-compiling linux-headers package") Reported-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Closes: https://lore.kernel.org/linux-kbuild/CAK7LNARb3xO3ptBWOMpwKcyf3=zkfhMey5H2KnB1dOmUwM79dA@mail.gmail.com/T/#t Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-15tools: fix annoying "mkdir -p ..." logs when building tools in parallelMasahiro Yamada
When CONFIG_OBJTOOL=y or CONFIG_DEBUG_INFO_BTF=y, parallel builds show awkward "mkdir -p ..." logs. $ make -j16 [ snip ] mkdir -p /home/masahiro/ref/linux/tools/objtool && make O=/home/masahiro/ref/linux subdir=tools/objtool --no-print-directory -C objtool mkdir -p /home/masahiro/ref/linux/tools/bpf/resolve_btfids && make O=/home/masahiro/ref/linux subdir=tools/bpf/resolve_btfids --no-print-directory -C bpf/resolve_btfids Defining MAKEFLAGS=<value> on the command line wipes out command line switches from the resultant MAKEFLAGS definition, even though the command line switches are active. [1] MAKEFLAGS puts all single-letter options into the first word, and that word will be empty if no single-letter options were given. [2] However, this breaks if MAKEFLAGS=<value> is given on the command line. The tools/ and tools/% targets set MAKEFLAGS=<value> on the command line, which breaks the following code in tools/scripts/Makefile.include: short-opts := $(firstword -$(MAKEFLAGS)) If MAKEFLAGS really needs modification, it should be done through the environment variable, as follows: MAKEFLAGS=<value> $(MAKE) ... That said, I question whether modifying MAKEFLAGS is necessary here. The only flag we might want to exclude is --no-print-directory, as the tools build system changes the working directory. However, people might find the "Entering/Leaving directory" logs annoying. I simply removed the offending MAKEFLAGS=<value>. [1]: https://savannah.gnu.org/bugs/?62469 [2]: https://www.gnu.org/software/make/manual/make.html#Testing-Flags Fixes: ea01fa9f63ae ("tools: Connect to the kernel build system") Fixes: a50e43332756 ("perf tools: Honor parallel jobs") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Daniel Xu <dxu@dxuuu.xyz>
2025-02-15ALSA: hda/cirrus: Reduce codec resume timeVitaly Rodionov
This patch reduces the resume time by half and introduces an option to include a delay after a single write operation before continuing. Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://patch.msgid.link/20250214162354.2675652-2-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-02-15ALSA: hda/cirrus: Correct the full scale volume set logicVitaly Rodionov
This patch corrects the full-scale volume setting logic. On certain platforms, the full-scale volume bit is required. The current logic mistakenly sets this bit and incorrectly clears reserved bit 0, causing the headphone output to be muted. Fixes: 342b6b610ae2 ("ALSA: hda/cs8409: Fix Full Scale Volume setting for all variants") Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://patch.msgid.link/20250214210736.30814-1-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-02-14Merge tag 'alpha-fixes-v6.14-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha Pull alpha fixes from Matt Turner: "A few changes for alpha, including some important fixes for kernel stack alignment" * tag 'alpha-fixes-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha: alpha: Use str_yes_no() helper in pci_dac_dma_supported() alpha: Replace one-element array with flexible array member alpha: align stack for page fault and user unaligned trap handlers alpha: make stack 16-byte aligned (most cases) alpha: replace hardcoded stack offsets with autogenerated ones
2025-02-14geneve: Fix use-after-free in geneve_find_dev().Kuniyuki Iwashima
syzkaller reported a use-after-free in geneve_find_dev() [0] without repro. geneve_configure() links struct geneve_dev.next to net_generic(net, geneve_net_id)->geneve_list. The net here could differ from dev_net(dev) if IFLA_NET_NS_PID, IFLA_NET_NS_FD, or IFLA_TARGET_NETNSID is set. When dev_net(dev) is dismantled, geneve_exit_batch_rtnl() finally calls unregister_netdevice_queue() for each dev in the netns, and later the dev is freed. However, its geneve_dev.next is still linked to the backend UDP socket netns. Then, use-after-free will occur when another geneve dev is created in the netns. Let's call geneve_dellink() instead in geneve_destroy_tunnels(). [0]: BUG: KASAN: slab-use-after-free in geneve_find_dev drivers/net/geneve.c:1295 [inline] BUG: KASAN: slab-use-after-free in geneve_configure+0x234/0x858 drivers/net/geneve.c:1343 Read of size 2 at addr ffff000054d6ee24 by task syz.1.4029/13441 CPU: 1 UID: 0 PID: 13441 Comm: syz.1.4029 Not tainted 6.13.0-g0ad9617c78ac #24 dc35ca22c79fb82e8e7bc5c9c9adafea898b1e3d Hardware name: linux,dummy-virt (DT) Call trace: show_stack+0x38/0x50 arch/arm64/kernel/stacktrace.c:466 (C) __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xbc/0x108 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x16c/0x6f0 mm/kasan/report.c:489 kasan_report+0xc0/0x120 mm/kasan/report.c:602 __asan_report_load2_noabort+0x20/0x30 mm/kasan/report_generic.c:379 geneve_find_dev drivers/net/geneve.c:1295 [inline] geneve_configure+0x234/0x858 drivers/net/geneve.c:1343 geneve_newlink+0xb8/0x128 drivers/net/geneve.c:1634 rtnl_newlink_create+0x23c/0x868 net/core/rtnetlink.c:3795 __rtnl_newlink net/core/rtnetlink.c:3906 [inline] rtnl_newlink+0x1054/0x1630 net/core/rtnetlink.c:4021 rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6911 netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2543 rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6938 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x618/0x838 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x5fc/0x8b0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:713 [inline] __sock_sendmsg net/socket.c:728 [inline] ____sys_sendmsg+0x410/0x6f8 net/socket.c:2568 ___sys_sendmsg+0x178/0x1d8 net/socket.c:2622 __sys_sendmsg net/socket.c:2654 [inline] __do_sys_sendmsg net/socket.c:2659 [inline] __se_sys_sendmsg net/socket.c:2657 [inline] __arm64_sys_sendmsg+0x12c/0x1c8 net/socket.c:2657 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x90/0x278 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x13c/0x250 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x54/0x70 arch/arm64/kernel/syscall.c:151 el0_svc+0x4c/0xa8 arch/arm64/kernel/entry-common.c:744 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:762 el0t_64_sync+0x198/0x1a0 arch/arm64/kernel/entry.S:600 Allocated by task 13247: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x68 mm/kasan/common.c:68 kasan_save_alloc_info+0x44/0x58 mm/kasan/generic.c:568 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x84/0xa0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4298 [inline] __kmalloc_node_noprof+0x2a0/0x560 mm/slub.c:4304 __kvmalloc_node_noprof+0x9c/0x230 mm/util.c:645 alloc_netdev_mqs+0xb8/0x11a0 net/core/dev.c:11470 rtnl_create_link+0x2b8/0xb50 net/core/rtnetlink.c:3604 rtnl_newlink_create+0x19c/0x868 net/core/rtnetlink.c:3780 __rtnl_newlink net/core/rtnetlink.c:3906 [inline] rtnl_newlink+0x1054/0x1630 net/core/rtnetlink.c:4021 rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6911 netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2543 rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6938 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x618/0x838 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x5fc/0x8b0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:713 [inline] __sock_sendmsg net/socket.c:728 [inline] ____sys_sendmsg+0x410/0x6f8 net/socket.c:2568 ___sys_sendmsg+0x178/0x1d8 net/socket.c:2622 __sys_sendmsg net/socket.c:2654 [inline] __do_sys_sendmsg net/socket.c:2659 [inline] __se_sys_sendmsg net/socket.c:2657 [inline] __arm64_sys_sendmsg+0x12c/0x1c8 net/socket.c:2657 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x90/0x278 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x13c/0x250 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x54/0x70 arch/arm64/kernel/syscall.c:151 el0_svc+0x4c/0xa8 arch/arm64/kernel/entry-common.c:744 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:762 el0t_64_sync+0x198/0x1a0 arch/arm64/kernel/entry.S:600 Freed by task 45: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x68 mm/kasan/common.c:68 kasan_save_free_info+0x58/0x70 mm/kasan/generic.c:582 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x48/0x68 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2353 [inline] slab_free mm/slub.c:4613 [inline] kfree+0x140/0x420 mm/slub.c:4761 kvfree+0x4c/0x68 mm/util.c:688 netdev_release+0x94/0xc8 net/core/net-sysfs.c:2065 device_release+0x98/0x1c0 kobject_cleanup lib/kobject.c:689 [inline] kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x2b0/0x438 lib/kobject.c:737 netdev_run_todo+0xe5c/0xfc8 net/core/dev.c:11185 rtnl_unlock+0x20/0x38 net/core/rtnetlink.c:151 cleanup_net+0x4fc/0x8c0 net/core/net_namespace.c:648 process_one_work+0x700/0x1398 kernel/workqueue.c:3236 process_scheduled_works kernel/workqueue.c:3317 [inline] worker_thread+0x8c4/0xe10 kernel/workqueue.c:3398 kthread+0x4bc/0x608 kernel/kthread.c:464 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:862 The buggy address belongs to the object at ffff000054d6e000 which belongs to the cache kmalloc-cg-4k of size 4096 The buggy address is located 3620 bytes inside of freed 4096-byte region [ffff000054d6e000, ffff000054d6f000) The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x94d68 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 memcg:ffff000016276181 flags: 0x3fffe0000000040(head|node=0|zone=0|lastcpupid=0x1ffff) page_type: f5(slab) raw: 03fffe0000000040 ffff0000c000f500 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000040004 00000001f5000000 ffff000016276181 head: 03fffe0000000040 ffff0000c000f500 dead000000000122 0000000000000000 head: 0000000000000000 0000000000040004 00000001f5000000 ffff000016276181 head: 03fffe0000000003 fffffdffc1535a01 ffffffffffffffff 0000000000000000 head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff000054d6ed00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff000054d6ed80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff000054d6ee00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff000054d6ee80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff000054d6ef00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 2d07dc79fe04 ("geneve: add initial netdev driver for GENEVE tunnels") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250213043354.91368-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-14vsock/virtio: fix variables initialization during resumingJunnan Wu
When executing suspend to ram twice in a row, the `rx_buf_nr` and `rx_buf_max_nr` increase to three times vq->num_free. Then after virtqueue_get_buf and `rx_buf_nr` decreased in function virtio_transport_rx_work, the condition to fill rx buffer (rx_buf_nr < rx_buf_max_nr / 2) will never be met. It is because that `rx_buf_nr` and `rx_buf_max_nr` are initialized only in virtio_vsock_probe(), but they should be reset whenever virtqueues are recreated, like after a suspend/resume. Move the `rx_buf_nr` and `rx_buf_max_nr` initialization in virtio_vsock_vqs_init(), so we are sure that they are properly initialized, every time we initialize the virtqueues, either when we load the driver or after a suspend/resume. To prevent erroneous atomic load operations on the `queued_replies` in the virtio_transport_send_pkt_work() function which may disrupt the scheduling of vsock->rx_work when transmitting reply-required socket packets, this atomic variable must undergo synchronized initialization alongside the preceding two variables after a suspend/resume. Fixes: bd50c5dc182b ("vsock/virtio: add support for device suspend/resume") Link: https://lore.kernel.org/virtualization/20250207052033.2222629-1-junnan01.wu@samsung.com/ Co-developed-by: Ying Gao <ying01.gao@samsung.com> Signed-off-by: Ying Gao <ying01.gao@samsung.com> Signed-off-by: Junnan Wu <junnan01.wu@samsung.com> Reviewed-by: Luigi Leonardi <leonardi@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20250214012200.1883896-1-junnan01.wu@samsung.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-14Merge tag 'pci-v6.14-fixes-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci fixes from Bjorn Helgaas: - Update a BUILD_BUG_ON() usage that works on current compilers, but breaks compilation on gcc 5.3.1 (Alex Williamson) - Avoid use of FLR for Mediatek MT7922 WiFi; the device previously worked after a long timeout and fallback to SBR, but after a recent RRS change it doesn't work at all after FLR (Bjorn Helgaas) * tag 'pci-v6.14-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: PCI: Avoid FLR for Mediatek MT7922 WiFi PCI: Fix BUILD_BUG_ON usage for old gcc
2025-02-14Merge tag 'kvm-x86-fixes-6.14-rcN' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini
KVM fixes for 6.14 part 1 - Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being emulated by KVM to fix a NULL pointer dereference. - Enter guest mode (L2) from KVM's perspective before initializing the vCPU's nested NPT MMU so that the MMU is properly tagged for L2, not L1. - Load the guest's DR6 outside of the innermost .vcpu_run() loop, as the guest's value may be stale if a VM-Exit is handled in the fastpath.
2025-02-14x86/sev: Fix broken SNP support with KVM module built-inAshish Kalra
Fix issues with enabling SNP host support and effectively SNP support which is broken with respect to the KVM module being built-in. SNP host support is enabled in snp_rmptable_init() which is invoked as device_initcall(). SNP check on IOMMU is done during IOMMU PCI init (IOMMU_PCI_INIT stage). And for that reason snp_rmptable_init() is currently invoked via device_initcall() and cannot be invoked via subsys_initcall() as core IOMMU subsystem gets initialized via subsys_initcall(). Now, if kvm_amd module is built-in, it gets initialized before SNP host support is enabled in snp_rmptable_init() : [ 10.131811] kvm_amd: TSC scaling supported [ 10.136384] kvm_amd: Nested Virtualization enabled [ 10.141734] kvm_amd: Nested Paging enabled [ 10.146304] kvm_amd: LBR virtualization supported [ 10.151557] kvm_amd: SEV enabled (ASIDs 100 - 509) [ 10.156905] kvm_amd: SEV-ES enabled (ASIDs 1 - 99) [ 10.162256] kvm_amd: SEV-SNP enabled (ASIDs 1 - 99) [ 10.171508] kvm_amd: Virtual VMLOAD VMSAVE supported [ 10.177052] kvm_amd: Virtual GIF supported ... ... [ 10.201648] kvm_amd: in svm_enable_virtualization_cpu And then svm_x86_ops->enable_virtualization_cpu() (svm_enable_virtualization_cpu) programs MSR_VM_HSAVE_PA as following: wrmsrl(MSR_VM_HSAVE_PA, sd->save_area_pa); So VM_HSAVE_PA is non-zero before SNP support is enabled on all CPUs. snp_rmptable_init() gets invoked after svm_enable_virtualization_cpu() as following : ... [ 11.256138] kvm_amd: in svm_enable_virtualization_cpu ... [ 11.264918] SEV-SNP: in snp_rmptable_init This triggers a #GP exception in snp_rmptable_init() when snp_enable() is invoked to set SNP_EN in SYSCFG MSR: [ 11.294289] unchecked MSR access error: WRMSR to 0xc0010010 (tried to write 0x0000000003fc0000) at rIP: 0xffffffffaf5d5c28 (native_write_msr+0x8/0x30) ... [ 11.294404] Call Trace: [ 11.294482] <IRQ> [ 11.294513] ? show_stack_regs+0x26/0x30 [ 11.294522] ? ex_handler_msr+0x10f/0x180 [ 11.294529] ? search_extable+0x2b/0x40 [ 11.294538] ? fixup_exception+0x2dd/0x340 [ 11.294542] ? exc_general_protection+0x14f/0x440 [ 11.294550] ? asm_exc_general_protection+0x2b/0x30 [ 11.294557] ? __pfx_snp_enable+0x10/0x10 [ 11.294567] ? native_write_msr+0x8/0x30 [ 11.294570] ? __snp_enable+0x5d/0x70 [ 11.294575] snp_enable+0x19/0x20 [ 11.294578] __flush_smp_call_function_queue+0x9c/0x3a0 [ 11.294586] generic_smp_call_function_single_interrupt+0x17/0x20 [ 11.294589] __sysvec_call_function+0x20/0x90 [ 11.294596] sysvec_call_function+0x80/0xb0 [ 11.294601] </IRQ> [ 11.294603] <TASK> [ 11.294605] asm_sysvec_call_function+0x1f/0x30 ... [ 11.294631] arch_cpu_idle+0xd/0x20 [ 11.294633] default_idle_call+0x34/0xd0 [ 11.294636] do_idle+0x1f1/0x230 [ 11.294643] ? complete+0x71/0x80 [ 11.294649] cpu_startup_entry+0x30/0x40 [ 11.294652] start_secondary+0x12d/0x160 [ 11.294655] common_startup_64+0x13e/0x141 [ 11.294662] </TASK> This #GP exception is getting triggered due to the following errata for AMD family 19h Models 10h-1Fh Processors: Processor may generate spurious #GP(0) Exception on WRMSR instruction: Description: The Processor will generate a spurious #GP(0) Exception on a WRMSR instruction if the following conditions are all met: - the target of the WRMSR is a SYSCFG register. - the write changes the value of SYSCFG.SNPEn from 0 to 1. - One of the threads that share the physical core has a non-zero value in the VM_HSAVE_PA MSR. The document being referred to above: https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/revision-guides/57095-PUB_1_01.pdf To summarize, with kvm_amd module being built-in, KVM/SVM initialization happens before host SNP is enabled and this SVM initialization sets VM_HSAVE_PA to non-zero, which then triggers a #GP when SYSCFG.SNPEn is being set and this will subsequently cause SNP_INIT(_EX) to fail with INVALID_CONFIG error as SYSCFG[SnpEn] is not set on all CPUs. Essentially SNP host enabling code should be invoked before KVM initialization, which is currently not the case when KVM is built-in. Add fix to call snp_rmptable_init() early from iommu_snp_enable() directly and not invoked via device_initcall() which enables SNP host support before KVM initialization with kvm_amd module built-in. Add additional handling for `iommu=off` or `amd_iommu=off` options. Note that IOMMUs need to be enabled for SNP initialization, therefore, if host SNP support is enabled but late IOMMU initialization fails then that will cause PSP driver's SNP_INIT to fail as IOMMU SNP sanity checks in SNP firmware will fail with invalid configuration error as below: [ 9.723114] ccp 0000:23:00.1: sev enabled [ 9.727602] ccp 0000:23:00.1: psp enabled [ 9.732527] ccp 0000:a2:00.1: enabling device (0000 -> 0002) [ 9.739098] ccp 0000:a2:00.1: no command queues available [ 9.745167] ccp 0000:a2:00.1: psp enabled [ 9.805337] ccp 0000:23:00.1: SEV-SNP: failed to INIT rc -5, error 0x3 [ 9.866426] ccp 0000:23:00.1: SEV API:1.53 build:5 Fixes: c3b86e61b756 ("x86/cpufeatures: Enable/unmask SEV-SNP CPU feature") Co-developed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Co-developed-by: Vasant Hegde <vasant.hegde@amd.com> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Acked-by: Joerg Roedel <jroedel@suse.de> Message-ID: <138b520fb83964782303b43ade4369cd181fdd9c.1739226950.git.ashish.kalra@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2025-02-14KVM: SVM: Ensure PSP module is initialized if KVM module is built-inSean Christopherson
The kernel's initcall infrastructure lacks the ability to express dependencies between initcalls, whereas the modules infrastructure automatically handles dependencies via symbol loading. Ensure the PSP SEV driver is initialized before proceeding in sev_hardware_setup() if KVM is built-in as the dependency isn't handled by the initcall infrastructure. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Message-ID: <f78ddb64087df27e7bcb1ae0ab53f55aa0804fab.1739226950.git.ashish.kalra@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2025-02-14crypto: ccp: Add external API interface for PSP module initializationSean Christopherson
KVM is dependent on the PSP SEV driver and PSP SEV driver needs to be loaded before KVM module. In case of module loading any dependent modules are automatically loaded but in case of built-in modules there is no inherent mechanism available to specify dependencies between modules and ensure that any dependent modules are loaded implicitly. Add a new external API interface for PSP module initialization which allows PSP SEV driver to be loaded explicitly if KVM is built-in. Signed-off-by: Sean Christopherson <seanjc@google.com> Co-developed-by: Ashish Kalra <ashish.kalra@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Message-ID: <15279ca0cad56a07cf12834ec544310f85ff5edc.1739226950.git.ashish.kalra@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2025-02-14Merge tag 'kvmarm-fixes-6.14-2' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.14, take #2 - Large set of fixes for vector handling, specially in the interactions between host and guest state. This fixes a number of bugs affecting actual deployments, and greatly simplifies the FP/SIMD/SVE handling. Thanks to Mark Rutland for dealing with this thankless task. - Fix an ugly race between vcpu and vgic creation/init, resulting in unexpected behaviours. - Fix use of kernel VAs at EL2 when emulating timers with nVHE. - Small set of pKVM improvements and cleanups.
2025-02-14Merge tag 'thermal-6.14-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fixes from Rafael Wysocki: "Fix a regression caused by an inadvertent change of the THERMAL_GENL_ATTR_CPU_CAPABILITY value in one of the recent thermal commits (Zhang Rui) and drop a stale piece of documentation (Daniel Lezcano)" * tag 'thermal-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal/cpufreq_cooling: Remove structure member documentation thermal/netlink: Prevent userspace segmentation fault by adjusting UAPI header
generated by cgit (git 2.34.1) at 2025-07-17 22:25:35 +0000