| Age | Commit message (Collapse) | Author |
|---|
|
Syzbot caught an "KMSAN: uninit-value" warning [1], which is caused by the
ppp driver not initializing a 2-byte header when using socket filter.
The following code can generate a PPP filter BPF program:
'''
struct bpf_program fp;
pcap_t *handle;
handle = pcap_open_dead(DLT_PPP_PPPD, 65535);
pcap_compile(handle, &fp, "ip and outbound", 0, 0);
bpf_dump(&fp, 1);
'''
Its output is:
'''
(000) ldh [2]
(001) jeq #0x21 jt 2 jf 5
(002) ldb [0]
(003) jeq #0x1 jt 4 jf 5
(004) ret #65535
(005) ret #0
'''
Wen can find similar code at the following link:
https://github.com/ppp-project/ppp/blob/master/pppd/options.c#L1680
The maintainer of this code repository is also the original maintainer
of the ppp driver.
As you can see the BPF program skips 2 bytes of data and then reads the
'Protocol' field to determine if it's an IP packet. Then it read the first
byte of the first 2 bytes to determine the direction.
The issue is that only the first byte indicating direction is initialized
in current ppp driver code while the second byte is not initialized.
For normal BPF programs generated by libpcap, uninitialized data won't be
used, so it's not a problem. However, for carefully crafted BPF programs,
such as those generated by syzkaller [2], which start reading from offset
0, the uninitialized data will be used and caught by KMSAN.
[1] https://syzkaller.appspot.com/bug?extid=853242d9c9917165d791
[2] https://syzkaller.appspot.com/text?tag=ReproC&x=11994913980000
Cc: Paul Mackerras <paulus@samba.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+853242d9c9917165d791@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/000000000000dea025060d6bc3bc@google.com/
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250228141408.393864-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Luca Weiss says:
====================
Fixes for IPA v4.7
During bringup of IPA v4.7 unfortunately some bits were missed, and it
couldn't be tested much back then due to missing features in tqftpserv
which caused the modem to not enable correctly.
Especially the last commit is important since it makes mobile data
actually functional on SoCs with IPA v4.7 like SM6350 - used on the
Fairphone 4. Before that, you'd get an IP address on the interface but
then e.g. ping never got any response back.
====================
Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-0-a88dd8249d8a@fairphone.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enable the checksum option for these two endpoints in order to allow
mobile data to actually work. Without this, no packets seem to make it
through the IPA.
Fixes: b310de784bac ("net: ipa: add IPA v4.7 support")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-3-a88dd8249d8a@fairphone.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As per downstream reference, max_writes should be 12 and max_reads
should be 13.
Fixes: b310de784bac ("net: ipa: add IPA v4.7 support")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-2-a88dd8249d8a@fairphone.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the downstream IPA driver there's only one group defined for source
and destination, and the destination group doesn't have a _DPL suffix.
Fixes: b310de784bac ("net: ipa: add IPA v4.7 support")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-1-a88dd8249d8a@fairphone.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During S4 retore flow, quickspi device was resetted by driver and state
was changed to RESETTED. It is needed to be change to ENABLED state
after S4 re-initialization finished, otherwise, device will run in wrong
state and HID input data will be dropped.
Signed-off-by: Even Xu <even.xu@intel.com>
Fixes: 6912aaf3fd24 ("HID: intel-thc-hid: intel-quickspi: Add PM implementation")
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
There is a spelling mistake in a dev_err_once message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
When a hid-steam device is removed it must clean up the client_hdev used for
intercepting hidraw access. This can lead to scheduling deferred work to
reattach the input device. Though the cleanup cancels the deferred work, this
was done before the client_hdev itself is cleaned up, so it gets rescheduled.
This patch fixes the ordering to make sure the deferred work is properly
canceled.
Reported-by: syzbot+0154da2d403396b2bd59@syzkaller.appspotmail.com
Fixes: 79504249d7e2 ("HID: hid-steam: Move hidraw input (un)registering to work")
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
There is a spelling mistake in a literal string. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Syzkaller reports a NULL pointer dereference issue in input_event().
BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:68 [inline]
BUG: KASAN: null-ptr-deref in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
BUG: KASAN: null-ptr-deref in is_event_supported drivers/input/input.c:67 [inline]
BUG: KASAN: null-ptr-deref in input_event+0x42/0xa0 drivers/input/input.c:395
Read of size 8 at addr 0000000000000028 by task syz-executor199/2949
CPU: 0 UID: 0 PID: 2949 Comm: syz-executor199 Not tainted 6.13.0-rc4-syzkaller-00076-gf097a36ef88d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
kasan_report+0xd9/0x110 mm/kasan/report.c:602
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
instrument_atomic_read include/linux/instrumented.h:68 [inline]
_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
is_event_supported drivers/input/input.c:67 [inline]
input_event+0x42/0xa0 drivers/input/input.c:395
input_report_key include/linux/input.h:439 [inline]
key_down drivers/hid/hid-appleir.c:159 [inline]
appleir_raw_event+0x3e5/0x5e0 drivers/hid/hid-appleir.c:232
__hid_input_report.constprop.0+0x312/0x440 drivers/hid/hid-core.c:2111
hid_ctrl+0x49f/0x550 drivers/hid/usbhid/hid-core.c:484
__usb_hcd_giveback_urb+0x389/0x6e0 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x396/0x450 drivers/usb/core/hcd.c:1734
dummy_timer+0x17f7/0x3960 drivers/usb/gadget/udc/dummy_hcd.c:1993
__run_hrtimer kernel/time/hrtimer.c:1739 [inline]
__hrtimer_run_queues+0x20a/0xae0 kernel/time/hrtimer.c:1803
hrtimer_run_softirq+0x17d/0x350 kernel/time/hrtimer.c:1820
handle_softirqs+0x206/0x8d0 kernel/softirq.c:561
__do_softirq kernel/softirq.c:595 [inline]
invoke_softirq kernel/softirq.c:435 [inline]
__irq_exit_rcu+0xfa/0x160 kernel/softirq.c:662
irq_exit_rcu+0x9/0x30 kernel/softirq.c:678
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline]
sysvec_apic_timer_interrupt+0x90/0xb0 arch/x86/kernel/apic/apic.c:1049
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702
__mod_timer+0x8f6/0xdc0 kernel/time/timer.c:1185
add_timer+0x62/0x90 kernel/time/timer.c:1295
schedule_timeout+0x11f/0x280 kernel/time/sleep_timeout.c:98
usbhid_wait_io+0x1c7/0x380 drivers/hid/usbhid/hid-core.c:645
usbhid_init_reports+0x19f/0x390 drivers/hid/usbhid/hid-core.c:784
hiddev_ioctl+0x1133/0x15b0 drivers/hid/usbhid/hiddev.c:794
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl fs/ioctl.c:892 [inline]
__x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
This happens due to the malformed report items sent by the emulated device
which results in a report, that has no fields, being added to the report list.
Due to this appleir_input_configured() is never called, hidinput_connect()
fails which results in the HID_CLAIMED_INPUT flag is not being set. However,
it does not make appleir_probe() fail and lets the event callback to be
called without the associated input device.
Thus, add a check for the HID_CLAIMED_INPUT flag and leave the event hook
early if the driver didn't claim any input_dev for some reason. Moreover,
some other hid drivers accessing input_dev in their event callbacks do have
similar checks, too.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 9a4a5574ce42 ("HID: appleir: add support for Apple ir devices")
Cc: stable@vger.kernel.org
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Remove the fixup to make the Omoton KB066's F6 key F6 when not holding
Fn. That was really just a hack to allow typing F6 in fnmode>0, and it
didn't fix any of the other F keys that were likewise untypable in
fnmode>0. Instead, because the Omoton's Fn key is entirely internal to
the keyboard, completely disable Fn key translation when an Omoton is
detected, which will prevent the hid-apple driver from interfering with
the keyboard's built-in Fn key handling. All of the F keys, including
F6, are then typable when Fn is held.
The Omoton KB066 and the Apple A1255 both have HID product code
05ac:022c. The self-reported name of every original A1255 when they left
the factory was "Apple Wireless Keyboard". By default, Mac OS changes
the name to "<username>'s keyboard" when pairing with the keyboard, but
Mac OS allows the user to set the internal name of Apple keyboards to
anything they like. The Omoton KB066's name, on the other hand, is not
configurable: It is always "Bluetooth Keyboard". Because that name is so
generic that a user might conceivably use the same name for a real Apple
keyboard, detect Omoton keyboards based on both having that exact name
and having HID product code 022c.
Fixes: 819083cb6eed ("HID: apple: fix up the F6 key on the Omoton KB066 keyboard")
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
We have two places to print "failed to set a report to ...",
use "get a report from" instead of "set a report to", it makes
people who knows less about the module to know where the error
happened.
Before:
i2c_hid_acpi i2c-FTSC1000:00: failed to set a report to device: -11
After:
i2c_hid_acpi i2c-FTSC1000:00: failed to get a report from device: -11
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Acer's WMI driver uses balanced-performance but AMD-PMF doesn't.
In case a machine binds with both drivers let amd-pmf use
balanced-performance as well.
Fixes: 688834743d67 ("ACPI: platform_profile: Allow multiple handlers")
Suggested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250228170155.2623386-4-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When amd-pmf and asus-wmi are both bound no low power option shows
up in sysfs. Add a hidden choice for amd-pmf to support 'quiet' mode
to let both bind.
Fixes: 688834743d67 ("ACPI: platform_profile: Allow multiple handlers")
Suggested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250228170155.2623386-3-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When two drivers don't support all the same profiles the legacy interface
only exports the common profiles.
This causes problems for cases where one driver uses low-power but another
uses quiet because the result is that neither is exported to sysfs.
To allow two drivers to disagree, add support for "hidden choices".
Hidden choices are platform profiles that a driver supports to be
compatible with the platform profile of another driver.
Fixes: 688834743d67 ("ACPI: platform_profile: Allow multiple handlers")
Reported-by: Antheas Kapenekakis <lkml@antheas.dev>
Closes: https://lore.kernel.org/platform-driver-x86/e64b771e-3255-42ad-9257-5b8fc6c24ac9@gmx.de/T/#mc068042dd29df36c16c8af92664860fc4763974b
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250228170155.2623386-2-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Any rules using engine matching are currently broken due RTP processing
happening too in early init, before the list of hardware engines has been
initialised.
Fix this by moving workaround processing to later in the driver probe
sequence, to just before the processed list is used for the first time.
Looking at the debugfs gt0/workarounds on ADL-P we notice 14011060649
should be present while we see, before:
GT Workarounds
14011059788
14015795083
And with the patch:
GT Workarounds
14011060649
14011059788
14015795083
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: stable@vger.kernel.org # v6.11+
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250227101304.46660-2-tvrtko.ursulin@igalia.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 25d434cef791e03cf40680f5441b576c639bfa84)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Currently we just leave it uninitialised, which at first looks harmless,
however we also don't zero out the pfn array, and with pfn_flags_mask
the idea is to be able set individual flags for a given range of pfn or
completely ignore them, outside of default_flags. So here we end up with
pfn[i] & pfn_flags_mask, and if both are uninitialised we might get back
an unexpected flags value, like asking for read only with default_flags,
but getting back write on top, leading to potentially bogus behaviour.
To fix this ensure we zero the pfn_flags_mask, such that hmm only
considers the default_flags and not also the initial pfn[i] value.
v2 (Thomas):
- Prefer proper initializer.
Fixes: 81e058a3e7fd ("drm/xe: Introduce helper to populate userptr")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226174748.294285-2-matthew.auld@intel.com
(cherry picked from commit dd8c01e42f4c5c1eaf02f003d7d588ba6706aa71)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We create the stream encoders and attach connectors for each pipe we
have. As the number of pipes has increased, we've failed to update the
topology manager maximum number of payloads to match that. Bump up the
max stream count to match number of pipes, enabling the fourth stream on
platforms that support four pipes.
Cc: stable@vger.kernel.org
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226135626.1956012-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 15bccbfb78d63a2a621b30caff8b9424160c6c89)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This is already handled below in the code by fixup_initial_plane_config.
Fixes: a8153627520a ("drm/i915: Try to relocate the BIOS fb to the start of ggtt")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210083111.230484-3-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
(cherry picked from commit 2218704997979fbf11765281ef752f07c5cf25bb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Commit 2a86f6612164 ("kbuild: use KBUILD_DEFCONFIG as the fallback
for DEFCONFIG_LIST") removed arch/$ARCH/defconfig; however,
the document has not been updated to reflect this change yet.
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The headercheck tries to call clang with a mix of compiler arguments
that don't include the target architecture. When building e.g. x86
headers on arm64, this produces a warning like
clang: warning: unknown platform, assuming -mfloat-abi=soft
Add in the KBUILD_CPPFLAGS, which contain the target, in order to make it
build properly.
See also 1b71c2fb04e7 ("kbuild: userprogs: fix bitsize and target
detection on clang").
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Fixes: feb843a469fb ("kbuild: add $(CLANG_FLAGS) to KBUILD_CPPFLAGS")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fix from Rob Herring:
- Revert reserved-memory 'alignment' property to use '#address-cells'
instead of '#size-cells'. What's in use trumps the spec.
* tag 'devicetree-fixes-for-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
Revert "of: reserved-memory: Fix using wrong number of cells to get property 'alignment'"
|
|
The userprog infrastructure links objects files through $(CC).
Either explicitly by manually calling $(CC) on multiple object files or
implicitly by directly compiling a source file to an executable.
The documentation at Documentation/kbuild/llvm.rst indicates that ld.lld
would be used for linking if LLVM=1 is specified.
However clang instead will use either a globally installed cross linker
from $PATH called ${target}-ld or fall back to the system linker, which
probably does not support crosslinking.
For the normal kernel build this is not an issue because the linker is
always executed directly, without the compiler being involved.
Explicitly pass --ld-path to clang so $(LD) is respected.
As clang 13.0.1 is required to build the kernel, this option is available.
Fixes: 7f3a59db274c ("kbuild: add infrastructure to build userspace programs")
Cc: stable@vger.kernel.org # needs wrapping in $(cc-option) for < 6.9
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
pipe_readable(), pipe_writable(), and pipe_poll() can read "pipe->head"
and "pipe->tail" outside of "pipe->mutex" critical section. When the
head and the tail are read individually in that order, there is a window
for interruption between the two reads in which both the head and the
tail can be updated by concurrent readers and writers.
One of the problematic scenarios observed with hackbench running
multiple groups on a large server on a particular pipe inode is as
follows:
pipe->head = 36
pipe->tail = 36
hackbench-118762 [057] ..... 1029.550548: pipe_write: *wakes up: pipe not full*
hackbench-118762 [057] ..... 1029.550548: pipe_write: head: 36 -> 37 [tail: 36]
hackbench-118762 [057] ..... 1029.550548: pipe_write: *wake up next reader 118740*
hackbench-118762 [057] ..... 1029.550548: pipe_write: *wake up next writer 118768*
hackbench-118768 [206] ..... 1029.55055X: pipe_write: *writer wakes up*
hackbench-118768 [206] ..... 1029.55055X: pipe_write: head = READ_ONCE(pipe->head) [37]
... CPU 206 interrupted (exact wakeup was not traced but 118768 did read head at 37 in traces)
hackbench-118740 [057] ..... 1029.550558: pipe_read: *reader wakes up: pipe is not empty*
hackbench-118740 [057] ..... 1029.550558: pipe_read: tail: 36 -> 37 [head = 37]
hackbench-118740 [057] ..... 1029.550559: pipe_read: *pipe is empty; wakeup writer 118768*
hackbench-118740 [057] ..... 1029.550559: pipe_read: *sleeps*
hackbench-118766 [185] ..... 1029.550592: pipe_write: *New writer comes in*
hackbench-118766 [185] ..... 1029.550592: pipe_write: head: 37 -> 38 [tail: 37]
hackbench-118766 [185] ..... 1029.550592: pipe_write: *wakes up reader 118766*
hackbench-118740 [185] ..... 1029.550598: pipe_read: *reader wakes up; pipe not empty*
hackbench-118740 [185] ..... 1029.550599: pipe_read: tail: 37 -> 38 [head: 38]
hackbench-118740 [185] ..... 1029.550599: pipe_read: *pipe is empty*
hackbench-118740 [185] ..... 1029.550599: pipe_read: *reader sleeps; wakeup writer 118768*
... CPU 206 switches back to writer
hackbench-118768 [206] ..... 1029.550601: pipe_write: tail = READ_ONCE(pipe->tail) [38]
hackbench-118768 [206] ..... 1029.550601: pipe_write: pipe_full()? (u32)(37 - 38) >= 16? Yes
hackbench-118768 [206] ..... 1029.550601: pipe_write: *writer goes back to sleep*
[ Tasks 118740 and 118768 can then indefinitely wait on each other. ]
The unsigned arithmetic in pipe_occupancy() wraps around when
"pipe->tail > pipe->head" leading to pipe_full() returning true despite
the pipe being empty.
The case of genuine wraparound of "pipe->head" is handled since pipe
buffer has data allowing readers to make progress until the pipe->tail
wraps too after which the reader will wakeup a sleeping writer, however,
mistaking the pipe to be full when it is in fact empty can lead to
readers and writers waiting on each other indefinitely.
This issue became more problematic and surfaced as a hang in hackbench
after the optimization in commit aaec5a95d596 ("pipe_read: don't wake up
the writer if the pipe is still full") significantly reduced the number
of spurious wakeups of writers that had previously helped mask the
issue.
To avoid missing any updates between the reads of "pipe->head" and
"pipe->write", unionize the two with a single unsigned long
"pipe->head_tail" member that can be loaded atomically.
Using "pipe->head_tail" to read the head and the tail ensures the
lockless checks do not miss any updates to the head or the tail and
since those two are only updated under "pipe->mutex", it ensures that
the head is always ahead of, or equal to the tail resulting in correct
calculations.
[ prateek: commit log, testing on x86 platforms. ]
Reported-and-debugged-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Closes: https://lore.kernel.org/lkml/e813814e-7094-4673-bc69-731af065a0eb@amd.com/
Reported-by: Alexey Gladkov <legion@kernel.org>
Closes: https://lore.kernel.org/all/Z8Wn0nTvevLRG_4m@example.org/
Fixes: 8cefc107ca54 ("pipe: Use head and tail pointers for the ring, not cursor and length")
Tested-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Alexey Gladkov <legion@kernel.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix a goof where KVM sets CPUID.0x80000022.EAX to CPUID.0x80000022.EBX
instead of zeroing both when PERFMON_V2 isn't supported by KVM. In
practice, barring a buggy CPU (or vCPU model when running nested) only the
!enable_pmu case is affected, as KVM always supports PERFMON_V2 if it's
available in hardware, i.e. CPUID.0x80000022.EBX will be '0' if PERFMON_V2
is unsupported.
For the !enable_pmu case, the bug is relatively benign as KVM will refuse
to enable PMU capabilities, but a VMM that reflects KVM's supported CPUID
into the guest could inadvertently induce #GPs in the guest due to
advertising support for MSRs that KVM refuses to emulate.
Fixes: 94cdeebd8211 ("KVM: x86/cpuid: Add AMD CPUID ExtPerfMonAndDbg leaf 0x80000022")
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20250304082314.472202-3-xiaoyao.li@intel.com
[sean: massage shortlog and changelog, tag for stable]
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
bugfixes for 6.14:
* regressions from this cycle:
- mac80211: fix sparse warning for monitor
- nl80211: disable multi-link reconfiguration (needs fixing)
* older issues:
- cfg80211: reject badly combined cooked monitor,
fix regulatory hint validity checks
- mac80211: handle TXQ flush w/o driver per-sta flush,
fix debugfs for monitor, fix element inheritance
- iwlwifi: fix rfkill, dead firmware handling, rate API
version, free A-MSDU handling, avoid large
allocations, fix string format
- brcmfmac: fix power handling on some boards
* tag 'wireless-2025-03-04' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: nl80211: disable multi-link reconfiguration
wifi: cfg80211: regulatory: improve invalid hints checking
wifi: brcmfmac: keep power during suspend if board requires it
wifi: mac80211: Fix sparse warning for monitor_sdata
wifi: mac80211: fix vendor-specific inheritance
wifi: mac80211: fix MLE non-inheritance parsing
wifi: iwlwifi: Fix A-MSDU TSO preparation
wifi: iwlwifi: Free pages allocated when failing to build A-MSDU
wifi: iwlwifi: limit printed string from FW file
wifi: iwlwifi: mvm: use the right version of the rate API
wifi: iwlwifi: mvm: don't try to talk to a dead firmware
wifi: iwlwifi: mvm: don't dump the firmware state upon RFKILL while suspend
wifi: iwlwifi: mvm: clean up ROC on failure
wifi: iwlwifi: fw: avoid using an uninitialized variable
wifi: iwlwifi: fw: allocate chained SG tables for dump
wifi: mac80211: remove debugfs dir for virtual monitor
wifi: mac80211: Cleanup sta TXQs on flush
wifi: nl80211: reject cooked mode if it is set along with other flags
====================
Link: https://patch.msgid.link/20250304124435.126272-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When fgraph is enabled the traced function return address is replaced with
trampoline return_to_handler(). The original return address of the traced
function is saved in per task return stack along with a stack pointer for
reliable stack unwinding via function_graph_enter_regs().
During stack unwinding e.g. for livepatching, ftrace_graph_ret_addr()
identifies the original return address of the traced function with the
saved stack pointer.
With a recent change, the stack pointers passed to ftrace_graph_ret_addr()
and function_graph_enter_regs() do not match anymore, and therefore the
original return address is not found.
Pass the correct stack pointer to function_graph_enter_regs() to fix this.
Fixes: 7495e179b478 ("s390/tracing: Enable HAVE_FTRACE_GRAPH_FUNC")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Commit 14be4e6f3522 ("selftests: vDSO: fix ELF hash table entry size for s390x")
changed the type of the ELF hash table entries to 64bit on s390x.
However the *GNU* hash tables entries are always 32bit.
The "bucket" pointer is shared between both hash algorithms.
On s390, this caused the GNU hash algorithm to access its 32-bit entries as if they
were 64-bit, triggering compiler warnings (assignment between "Elf64_Xword *" and
"Elf64_Word *") and runtime crashes.
Introduce a new dedicated "gnu_bucket" pointer which is used by the GNU hash.
Fixes: e0746bde6f82 ("selftests/vDSO: support DT_GNU_HASH")
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250217-selftests-vdso-s390-gnu-hash-v2-1-f6c2532ffe2a@linutronix.de
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The test_monitor_call() inline assembly uses the xgr instruction, which
also modifies the condition code, to clear a register. However the clobber
list of the inline assembly does not specify that the condition code is
modified, which may lead to incorrect code generation.
Use the lhi instruction instead to clear the register without that the
condition code is modified. Furthermore this limits clearing to the lower
32 bits of val, since its type is int.
Fixes: 17248ea03674 ("s390: fix __EMIT_BUG() macro")
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The alternative path leads to a build error after a recent change:
sound/pci/hda/patch_realtek.c: In function 'alc233_fixup_lenovo_low_en_micmute_led':
include/linux/stddef.h:9:14: error: called object is not a function or function pointer
9 | #define NULL ((void *)0)
| ^
sound/pci/hda/patch_realtek.c:5041:49: note: in expansion of macro 'NULL'
5041 | #define alc233_fixup_lenovo_line2_mic_hotkey NULL
| ^~~~
sound/pci/hda/patch_realtek.c:5063:9: note: in expansion of macro 'alc233_fixup_lenovo_line2_mic_hotkey'
5063 | alc233_fixup_lenovo_line2_mic_hotkey(codec, fix, action);
Using IS_REACHABLE() is somewhat questionable here anyway since it
leads to the input code not working when the HDA driver is builtin
but input is in a loadable module. Replace this with a hard compile-time
dependency on CONFIG_INPUT. In practice this won't chance much
other than solve the compiler error because it is rare to require
sound output but no input support.
Fixes: f603b159231b ("ALSA: hda/realtek - add supported Mic Mute LED for Lenovo platform")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250304142620.582191-1-arnd@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Hardware reports jack absent after reset/suspension regardless of jack
state, so introduce an additional delay only in suspension case to allow
proper detection to take place after a short delay.
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250304140504.139245-1-mstrozek@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A recent cleanup went a bit too far and dropped clearing the cycle bit
of link TRBs, so it stays different from the rest of the ring half of
the time. Then a race occurs: if the xHC reaches such link TRB before
more commands are queued, the link's cycle bit unintentionally matches
the xHC's cycle so it follows the link and waits for further commands.
If more commands are queued before the xHC gets there, inc_enq() flips
the bit so the xHC later sees a mismatch and stops executing commands.
This function is called before suspend and 50% of times after resuming
the xHC is doomed to get stuck sooner or later. Then some Stop Endpoint
command fails to complete in 5 seconds and this shows up
xhci_hcd 0000:00:10.0: xHCI host not responding to stop endpoint command
xhci_hcd 0000:00:10.0: xHCI host controller not responding, assume dead
xhci_hcd 0000:00:10.0: HC died; cleaning up
followed by loss of all USB decives on the affected bus. That's if you
are lucky, because if Set Deq gets stuck instead, the failure is silent.
Likely responsible for kernel bug 219824. I found this while searching
for possible causes of that regression and reproduced it locally before
hearing back from the reporter. To repro, simply wait for link cycle to
become set (debugfs), then suspend, resume and wait. To accelerate the
failure I used a script which repeatedly starts and stops a UVC camera.
Some HCs get fully reinitialized on resume and they are not affected.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219824
Fixes: 36b972d4b7ce ("usb: xhci: improve xhci_clear_command_ring()")
Cc: stable@vger.kernel.org
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250304113147.3322584-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
hclge_ptp_get_cycle returns an error
During the initialization of ptp, hclge_ptp_get_cycle might return an error
and returned directly without unregister clock and free it. To avoid that,
call hclge_ptp_destroy_clock to unregist and free clock if
hclge_ptp_get_cycle failed.
Fixes: 8373cd38a888 ("net: hns3: change the method of obtaining default ptp cycle")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250228105258.1243461-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Both the APIs in cfg80211 and the implementation in mac80211
aren't really ready yet, we have a large number of fixes. In
addition, it's not possible right now to discover support for
this feature from userspace. Disable it for now, there's no
rush.
Link: https://patch.msgid.link/20250303110538.fbeef42a5687.Iab122c22137e5675ebd99f5c031e30c0e5c7af2e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add missing "vpcie0v9-supply" and "vpcie1v8-supply" properties to the "pcie0"
node in the Pine64 RockPro64 board dtsi file. This eliminates the following
warnings from the kernel log:
rockchip-pcie f8000000.pcie: supply vpcie1v8 not found, using dummy regulator
rockchip-pcie f8000000.pcie: supply vpcie0v9 not found, using dummy regulator
These additions improve the accuracy of hardware description of the RockPro64
and, in theory, they should result in no functional changes to the way board
works after the changes, because the "vcca_0v9" and "vcca_1v8" regulators are
always enabled. [1][2] However, extended reliability testing, performed by
Chris, [3] has proven that the age-old issues with some PCI Express cards,
when used with a Pine64 RockPro64, are also resolved.
Those issues were already mentioned in the commit 43853e843aa6 (arm64: dts:
rockchip: Remove unsupported node from the Pinebook Pro dts, 2024-04-01),
together with a brief description of the out-of-tree enumeration delay patch
that reportedly resolves those issues. In a nutshell, booting a RockPro64
with some PCI Express cards attached to it caused a kernel oops. [4]
Symptomatically enough, to the commit author's best knowledge, only the Pine64
RockPro64, out of all RK3399-based boards and devices supported upstream, has
been reported to suffer from those PCI Express issues, and only the RockPro64
had some of the PCI Express supplies missing in its DT. Thus, perhaps some
weird timing issues exist that caused the "vcca_1v8" always-on regulator,
which is part of the RK808 PMIC, to actually not be enabled before the PCI
Express is initialized and enumerated on the RockPro64, causing oopses with
some PCIe cards, and the aforementioned enumeration delay patch [4] probably
acted as just a workaround for the underlying timing issue.
Admittedly, the Pine64 RockPro64 is a bit specific board by having a standard
PCI Express slot, allowing use of various standard cards, but pretty much
standard PCI Express cards have been attached to other RK3399 boards as well,
and the commit author is unaware ot such issues reported for them.
It's quite hard to be sure that the PCI Express issues are fully resolved by
these additions to the DT, without some really extensive and time-consuming
testing. However, these additions to the DT can result in good things and
improvements anyway, making them perfectly safe from the standpoint of being
unable to do any harm or cause some unforeseen regressions.
These changes apply to the both supported hardware revisions of the Pine64
RockPro64, i.e. to the production-run revisions 2.0 and 2.1. [1][2]
[1] https://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf
[2] https://files.pine64.org/doc/rockpro64/rockpro64_v20-SCH.pdf
[3] https://z9.de/hedgedoc/s/nF4d5G7rg#reboot-tests-for-PCIe-improvements
[4] https://lore.kernel.org/lkml/20230509153912.515218-1-vincenzopalazzodev@gmail.com/T/#u
Fixes: bba821f5479e ("arm64: dts: rockchip: add PCIe nodes on rk3399-rockpro64")
Cc: stable@vger.kernel.org
Cc: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Cc: Peter Geis <pgwipeout@gmail.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Reported-by: Diederik de Haas <didi.debian@cknow.org>
Tested-by: Chris Vogel <chris@z9.de>
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Tested-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/b39cfd7490d8194f053bf3971f13a43472d1769e.1740941097.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Make NET_DSA_REALTEK_RTL8366RB_LEDS a hidden symbol.
It seems very unlikely user would want to intentionally
disable it.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250228004534.3428681-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Partially revert commit b71724147e73 ("be2net: replace polling with
sleeping in the FW completion path") w.r.t mcc mutex it introduces and the
use of usleep_range. The be2net be_ndo_bridge_getlink() callback is
called with rcu_read_lock, so this code has been broken for a long time.
Both the mutex_lock and the usleep_range can cause the issue Ian Kumlien
reported[1]. The call path is:
be_ndo_bridge_getlink -> be_cmd_get_hsw_config -> be_mcc_notify_wait ->
be_mcc_wait_compl -> usleep_range()
[1] https://lore.kernel.org/netdev/CAA85sZveppNgEVa_FD+qhOMtG_AavK9_mFiU+jWrMtXmwqefGA@mail.gmail.com/
Tested-by: Ian Kumlien <ian.kumlien@gmail.com>
Fixes: b71724147e73 ("be2net: replace polling with sleeping in the FW completion path")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250227164129.1201164-1-razor@blackwall.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
CPUID leaf 0x2's one-byte TLB descriptors report the number of entries
for specific TLB types, among other properties.
Typically, each emitted descriptor implies the same number of entries
for its respective TLB type(s). An emitted 0x63 descriptor is an
exception: it implies 4 data TLB entries for 1GB pages and 32 data TLB
entries for 2MB or 4MB pages.
For the TLB descriptors parsing code, the entry count for 1GB pages is
encoded at the intel_tlb_table[] mapping, but the 2MB/4MB entry count is
totally ignored.
Update leaf 0x2's parsing logic 0x2 to account for 32 data TLB entries
for 2MB/4MB pages implied by the 0x63 descriptor.
Fixes: e0ba94f14f74 ("x86/tlb_info: get last level TLB entry number of CPU")
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250304085152.51092-4-darwi@linutronix.de
|
|
CPUID leaf 0x2 emits one-byte descriptors in its four output registers
EAX, EBX, ECX, and EDX. For these descriptors to be valid, the most
significant bit (MSB) of each register must be clear.
Leaf 0x2 parsing at intel.c only validated the MSBs of EAX, EBX, and
ECX, but left EDX unchecked.
Validate EDX's most-significant bit as well.
Fixes: e0ba94f14f74 ("x86/tlb_info: get last level TLB entry number of CPU")
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250304085152.51092-3-darwi@linutronix.de
|
|
CPUID leaf 0x2 emits one-byte descriptors in its four output registers
EAX, EBX, ECX, and EDX. For these descriptors to be valid, the most
significant bit (MSB) of each register must be clear.
The historical Git commit:
019361a20f016 ("- pre6: Intel: start to add Pentium IV specific stuff (128-byte cacheline etc)...")
introduced leaf 0x2 output parsing. It only validated the MSBs of EAX,
EBX, and ECX, but left EDX unchecked.
Validate EDX's most-significant bit.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250304085152.51092-2-darwi@linutronix.de
|
|
Currently kvfree_rcu() APIs use a system workqueue which is
"system_unbound_wq" to driver RCU machinery to reclaim a memory.
Recently, it has been noted that the following kernel warning can
be observed:
<snip>
workqueue: WQ_MEM_RECLAIM nvme-wq:nvme_scan_work is flushing !WQ_MEM_RECLAIM events_unbound:kfree_rcu_work
WARNING: CPU: 21 PID: 330 at kernel/workqueue.c:3719 check_flush_dependency+0x112/0x120
Modules linked in: intel_uncore_frequency(E) intel_uncore_frequency_common(E) skx_edac(E) ...
CPU: 21 UID: 0 PID: 330 Comm: kworker/u144:6 Tainted: G E 6.13.2-0_g925d379822da #1
Hardware name: Wiwynn Twin Lakes MP/Twin Lakes Passive MP, BIOS YMM20 02/01/2023
Workqueue: nvme-wq nvme_scan_work
RIP: 0010:check_flush_dependency+0x112/0x120
Code: 05 9a 40 14 02 01 48 81 c6 c0 00 00 00 48 8b 50 18 48 81 c7 c0 00 00 00 48 89 f9 48 ...
RSP: 0018:ffffc90000df7bd8 EFLAGS: 00010082
RAX: 000000000000006a RBX: ffffffff81622390 RCX: 0000000000000027
RDX: 00000000fffeffff RSI: 000000000057ffa8 RDI: ffff88907f960c88
RBP: 0000000000000000 R08: ffffffff83068e50 R09: 000000000002fffd
R10: 0000000000000004 R11: 0000000000000000 R12: ffff8881001a4400
R13: 0000000000000000 R14: ffff88907f420fb8 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88907f940000(0000) knlGS:0000000000000000
CR2: 00007f60c3001000 CR3: 000000107d010005 CR4: 00000000007726f0
PKRU: 55555554
Call Trace:
<TASK>
? __warn+0xa4/0x140
? check_flush_dependency+0x112/0x120
? report_bug+0xe1/0x140
? check_flush_dependency+0x112/0x120
? handle_bug+0x5e/0x90
? exc_invalid_op+0x16/0x40
? asm_exc_invalid_op+0x16/0x20
? timer_recalc_next_expiry+0x190/0x190
? check_flush_dependency+0x112/0x120
? check_flush_dependency+0x112/0x120
__flush_work.llvm.1643880146586177030+0x174/0x2c0
flush_rcu_work+0x28/0x30
kvfree_rcu_barrier+0x12f/0x160
kmem_cache_destroy+0x18/0x120
bioset_exit+0x10c/0x150
disk_release.llvm.6740012984264378178+0x61/0xd0
device_release+0x4f/0x90
kobject_put+0x95/0x180
nvme_put_ns+0x23/0xc0
nvme_remove_invalid_namespaces+0xb3/0xd0
nvme_scan_work+0x342/0x490
process_scheduled_works+0x1a2/0x370
worker_thread+0x2ff/0x390
? pwq_release_workfn+0x1e0/0x1e0
kthread+0xb1/0xe0
? __kthread_parkme+0x70/0x70
ret_from_fork+0x30/0x40
? __kthread_parkme+0x70/0x70
ret_from_fork_asm+0x11/0x20
</TASK>
---[ end trace 0000000000000000 ]---
<snip>
To address this switch to use of independent WQ_MEM_RECLAIM
workqueue, so the rules are not violated from workqueue framework
point of view.
Apart of that, since kvfree_rcu() does reclaim memory it is worth
to go with WQ_MEM_RECLAIM type of wq because it is designed for
this purpose.
Fixes: 6c6c47b063b5 ("mm, slab: call kvfree_rcu_barrier() from kmem_cache_destroy()"),
Reported-by: Keith Busch <kbusch@kernel.org>
Closes: https://lore.kernel.org/all/Z7iqJtCjHKfo8Kho@kbusch-mbp/
Cc: stable@vger.kernel.org
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
After phy initialization, some phy operations can only be executed while
in lower P states. Ensure GUSB3PIPECTL.SUSPENDENABLE and
GUSB2PHYCFG.SUSPHY are set soon after initialization to avoid blocking
phy ops.
Previously the SUSPENDENABLE bits are only set after the controller
initialization, which may not happen right away if there's no gadget
driver or xhci driver bound. Revise this to clear SUSPENDENABLE bits
only when there's mode switching (change in GCTL.PRTCAPDIR).
Fixes: 6d735722063a ("usb: dwc3: core: Prevent phy suspend during init")
Cc: stable <stable@kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/633aef0afee7d56d2316f7cc3e1b2a6d518a8cc9.1738280911.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add missing "avdd-0v9-supply" and "avdd-1v8-supply" properties to the "hdmi"
node in the Pine64 RockPro64 board dtsi file. To achieve this, also add the
associated "vcca_0v9" regulator that produces the 0.9 V supply, [1][2] which
hasn't been defined previously in the board dtsi file.
This also eliminates the following warnings from the kernel log:
dwhdmi-rockchip ff940000.hdmi: supply avdd-0v9 not found, using dummy regulator
dwhdmi-rockchip ff940000.hdmi: supply avdd-1v8 not found, using dummy regulator
There are no functional changes to the way board works with these additions,
because the "vcc1v8_dvp" and "vcca_0v9" regulators are always enabled, [1][2]
but these additions improve the accuracy of hardware description.
These changes apply to the both supported hardware revisions of the Pine64
RockPro64, i.e. to the production-run revisions 2.0 and 2.1. [1][2]
[1] https://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf
[2] https://files.pine64.org/doc/rockpro64/rockpro64_v20-SCH.pdf
Fixes: e4f3fb490967 ("arm64: dts: rockchip: add initial dts support for Rockpro64")
Cc: stable@vger.kernel.org
Suggested-by: Diederik de Haas <didi.debian@cknow.org>
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Tested-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/df3d7e8fe74ed5e727e085b18c395260537bb5ac.1740941097.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Firmware reports support for additional SRQs in the max_srq_ext field.
In CREQ_QUERY_FUNC response, if MAX_SRQ_EXTENDED flag is set, driver
should derive the total number of max SRQs by the summation of
"max_srq" and "max_srq_ext" fields.
Fixes: b1b66ae094cd ("bnxt_en: Use FW defined resource limits for RoCE")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Preethi G <preethi.gurusiddalingeswaraswamy@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1741021178-2569-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The modulo operation returns wrong result without the
paranthesis and that resulted in wrong QP table indexing.
Fixes: 84cf229f4001 ("RDMA/bnxt_re: Fix the qp table indexing")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1741021178-2569-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Driver is creating QP table too early while probing before
querying firmware capabilities. Driver currently is using
a hard coded values of 64K as size while creating QP table.
This resulted in a crash when firmwre supported QP count is
more than 64K.
To fix the issue, move the QP tabel creation after the firmware
capabilities are queried. Use the firmware returned maximum value
of QPs while creating the QP table.
Fixes: b1b66ae094cd ("bnxt_en: Use FW defined resource limits for RoCE")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1741021178-2569-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
In rdma-core, the following failures appear.
"
$ ./build/bin/run_tests.py -k device
ssssssss....FF........s
======================================================================
FAIL: test_query_device (tests.test_device.DeviceTest.test_query_device)
Test ibv_query_device()
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/ubuntu/rdma-core/tests/test_device.py", line 63, in
test_query_device
self.verify_device_attr(attr, dev)
File "/home/ubuntu/rdma-core/tests/test_device.py", line 200, in
verify_device_attr
assert attr.sys_image_guid != 0
^^^^^^^^^^^^^^^^^^^^^^^^
AssertionError
======================================================================
FAIL: test_query_device_ex (tests.test_device.DeviceTest.test_query_device_ex)
Test ibv_query_device_ex()
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/ubuntu/rdma-core/tests/test_device.py", line 222, in
test_query_device_ex
self.verify_device_attr(attr_ex.orig_attr, dev)
File "/home/ubuntu/rdma-core/tests/test_device.py", line 200, in
verify_device_attr
assert attr.sys_image_guid != 0
^^^^^^^^^^^^^^^^^^^^^^^^
AssertionError
"
The root cause is: before a net device is set with rxe, this net device
is used to generate a sys_image_guid.
Fixes: 2ac5415022d1 ("RDMA/rxe: Remove the direct link to net_device")
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://patch.msgid.link/20250302215444.3742072-1-yanjun.zhu@linux.dev
Reviewed-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Tested-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
If a BPF scheduler provides an invalid CPU (outside the nr_cpu_ids
range) as prev_cpu to scx_bpf_select_cpu_dfl() it can cause a kernel
crash.
To prevent this, validate prev_cpu in scx_bpf_select_cpu_dfl() and
trigger an scx error if an invalid CPU is specified.
Fixes: f0e1a0643a59b ("sched_ext: Implement BPF extensible scheduler class")
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull affs fixes from David Sterba:
"Two fixes from Simon Tatham. They're real bugfixes for problems with
OFS floppy disks created on linux and then read in the emulated
Workbench environment"
* tag 'affs-6.14-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
affs: don't write overlarge OFS data block size fields
affs: generate OFS sequence numbers starting at 1
|
|
Pull xfs cleanups from Carlos Maiolino:
"Just a few cleanups"
* tag 'xfs-fixes-6.14-rc6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: remove the XBF_STALE check from xfs_buf_rele_cached
xfs: remove most in-flight buffer accounting
xfs: decouple buffer readahead from the normal buffer read path
xfs: reduce context switches for synchronous buffered I/O
|
