| Age | Commit message (Collapse) | Author |
|---|
|
sco_conn refcount shall not be incremented a second time if the sk
already owns the refcount, so hold only when adding new chan.
Add sco_conn_hold() for clarity, as refcnt is never zero here due to the
sco_conn_add().
Fixes SCO socket shutdown not actually closing the SCO connection.
Fixes: ed9588554943 ("Bluetooth: SCO: remove the redundant sco_conn_put")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Automatically configure the altsetting for HCI_USER_CHANNEL when a SCO
is connected.
The motivation is to enable the HCI_USER_CHANNEL user to send out SCO
data through USB Bluetooth chips, which is mainly used for bidirectional
audio transfer (voice call). This was not capable because:
- Per Bluetooth Core Spec v5, Vol 4, Part B, 2.1, the corresponding
alternate setting should be set based on the air mode in order to
transfer SCO data, but
- The Linux Bluetooth HCI_USER_CHANNEL exposes the Bluetooth Host
Controller Interface to the user space, which is something above the
USB layer. The user space is not able to configure the USB alt while
keeping the channel open.
This patch intercepts the HCI_EV_SYNC_CONN_COMPLETE packets in btusb,
extracts the air mode, and configures the alt setting in btusb.
This patch is tested on ChromeOS devices. The USB Bluetooth models
(CVSD, TRANS alt3 and alt6) could work without a customized kernel.
Fixes: b16b327edb4d ("Bluetooth: btusb: add sysfs attribute to control USB alt setting")
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- amd/pmf:
- Initialize 'cb_mutex'
- Support for new version of PMF-TA
- intel-hid: Fix volume buttons on Microsoft Surface Go 4 tablet
- intel/vsec: Add Diamond Rapids support
- thinkpad_acpi: Add battery quirk for ThinkPad X131e
* tag 'platform-drivers-x86-v6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/amd/pmf: Update PMF Driver for Compatibility with new PMF-TA
platform/x86/amd/pmf: Propagate PMF-TA return codes
platform/x86/intel/vsec: Add Diamond Rapids support
platform/x86: thinkpad_acpi: Add battery quirk for ThinkPad X131e
platform/x86: intel-hid: fix volume buttons on Microsoft Surface Go 4 tablet
platform/x86/amd/pmf: Initialize and clean up `cb_mutex`
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"There is a single change in ALSA core (for sequencer code for the
module auto-loading in a wrong timing) while the all rest are various
HD- and USB-audio fixes.
Many of them are boring device-specific quirks, and should be safe to
take"
* tag 'sound-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Add support for ASUS Zenbook UM3406KA Laptops using CS35L41 HDA
ALSA: hda/realtek: Add support for ASUS B5405 and B5605 Laptops using CS35L41 HDA
ALSA: hda/realtek: Add support for ASUS B3405 and B3605 Laptops using CS35L41 HDA
ALSA: hda/realtek: Add support for various ASUS Laptops using CS35L41 HDA
ALSA: hda/realtek: Add support for ASUS ROG Strix G614 Laptops using CS35L41 HDA
ALSA: hda/realtek: Add support for ASUS ROG Strix GA603 Laptops using CS35L41 HDA
ALSA: hda/realtek: Add support for ASUS ROG Strix G814 Laptop using CS35L41 HDA
ALSA: hda: intel: Add Dell ALC3271 to power_save denylist
ALSA: hda/realtek: update ALC222 depop optimize
ALSA: hda: realtek: fix incorrect IS_REACHABLE() usage
ALSA: usx2y: validate nrpacks module parameter on probe
ALSA: hda/realtek - add supported Mic Mute LED for Lenovo platform
ALSA: seq: Avoid module auto-load handling at event delivery
ALSA: hda: Fix speakers on ASUS EXPERTBOOK P5405CSA 1.0
ALSA: hda/realtek: Fix Asus Z13 2025 audio
ALSA: hda/realtek: Remove (revert) duplicate Ally X config
|
|
Starting with the upcoming Rust 1.86.0 (to be released 2025-04-03),
Clippy warns:
error: doc list item overindented
--> drivers/gpu/drm/drm_panic_qr.rs:914:5
|
914 | /// will be encoded as binary segment, otherwise it will be encoded
| ^^^ help: try using ` ` (2 spaces)
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_overindented_list_items
The overindentation is slightly hard to notice, since all the items
start with a backquote that makes it look OK, but it is there.
Thus fix it.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Fixes: cb5164ac43d0 ("drm/panic: Add a QR code panic screen")
Cc: stable@vger.kernel.org # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs).
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250301231602.917580-2-ojeda@kernel.org
|
|
Starting with the upcoming Rust 1.86.0 (to be released 2025-04-03),
Clippy warns:
error: manually reimplementing `div_ceil`
--> drivers/gpu/drm/drm_panic_qr.rs:548:26
|
548 | let pad_offset = (offset + 7) / 8;
| ^^^^^^^^^^^^^^^^ help: consider using `.div_ceil()`: `offset.div_ceil(8)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#manual_div_ceil
And similarly for `stride`. Thus apply the suggestion to both.
The behavior (and thus codegen) is not exactly equivalent [1][2], since
`div_ceil()` returns the right value for the values that currently
would overflow.
Link: https://github.com/rust-lang/rust-clippy/issues/14333 [1]
Link: https://godbolt.org/z/dPq6nGnv3 [2]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Fixes: cb5164ac43d0 ("drm/panic: Add a QR code panic screen")
Cc: stable@vger.kernel.org # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs).
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250301231602.917580-1-ojeda@kernel.org
|
|
Compared to the SNP Guest Request, the "Extended" version adds data pages for
receiving certificates. If not enough pages provided, the HV can report to the
VM how much is needed so the VM can reallocate and repeat.
Commit
ae596615d93d ("virt: sev-guest: Reduce the scope of SNP command mutex")
moved handling of the allocated/desired pages number out of scope of said
mutex and create a possibility for a race (multiple instances trying to
trigger Extended request in a VM) as there is just one instance of
snp_msg_desc per /dev/sev-guest and no locking other than snp_cmd_mutex.
Fix the issue by moving the data blob/size and the GHCB input struct
(snp_req_data) into snp_guest_req which is allocated on stack now and accessed
by the GHCB caller under that mutex.
Stop allocating SEV_FW_BLOB_MAX_SIZE in snp_msg_alloc() as only one of four
callers needs it. Free the received blob in get_ext_report() right after it is
copied to the userspace. Possible future users of snp_send_guest_request() are
likely to have different ideas about the buffer size anyways.
Fixes: ae596615d93d ("virt: sev-guest: Reduce the scope of SNP command mutex")
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikunj A Dadhania <nikunj@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250307013700.437505-3-aik@amd.com
|
|
Commit
ae596615d93d ("virt: sev-guest: Reduce the scope of SNP command mutex")
narrowed the command mutex scope to snp_send_guest_request(). However,
GET_REPORT, GET_DERIVED_KEY, and GET_EXT_REPORT share the req structure in
snp_guest_dev. Without the mutex protection, concurrent requests can overwrite
each other's data. Fix it by dynamically allocating the request structure.
Fixes: ae596615d93d ("virt: sev-guest: Reduce the scope of SNP command mutex")
Closes: https://github.com/AMDESE/AMDSEV/issues/265
Reported-by: andreas.stuehrk@yaxi.tech
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250307013700.437505-2-aik@amd.com
|
|
Xen doesn't offer MSR_FAM10H_MMIO_CONF_BASE to all guests. This results
in the following warning:
unchecked MSR access error: RDMSR from 0xc0010058 at rIP: 0xffffffff8101d19f (xen_do_read_msr+0x7f/0xa0)
Call Trace:
xen_read_msr+0x1e/0x30
amd_get_mmconfig_range+0x2b/0x80
quirk_amd_mmconfig_area+0x28/0x100
pnp_fixup_device+0x39/0x50
__pnp_add_device+0xf/0x150
pnp_add_device+0x3d/0x100
pnpacpi_add_device_handler+0x1f9/0x280
acpi_ns_get_device_callback+0x104/0x1c0
acpi_ns_walk_namespace+0x1d0/0x260
acpi_get_devices+0x8a/0xb0
pnpacpi_init+0x50/0x80
do_one_initcall+0x46/0x2e0
kernel_init_freeable+0x1da/0x2f0
kernel_init+0x16/0x1b0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
based on quirks for a "PNP0c01" device. Treating MMCFG as disabled is the
right course of action, so no change is needed there.
This was most likely exposed by fixing the Xen MSR accessors to not be
silently-safe.
Fixes: 3fac3734c43a ("xen/pv: support selecting safe/unsafe msr accesses")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250307002846.3026685-1-andrew.cooper3@citrix.com
|
|
Kenneth noticed that his laptop crashes randomly when resuming from
hibernate if there is device connected and display tunneled. I was able
to reproduce this as well with the following steps:
1. Boot the system up, nothing connected.
2. Connect Thunderbolt 4 dock to the host.
3. Connect monitor to the Thunderbolt 4 dock.
4. Verify that there is picture on the screen.
5. Enter hibernate.
6. Exit hibernate.
7. Wait for the system to resume.
Expectation: System resumes just fine, the connected monitor still
shows screen.
Actual result: There is crash during resume, screen is blank.
What happens is that during resume from hibernate we tear down any
existing tunnels created by the boot kernel and this ends up calling
tb_dp_dprx_stop() which calls tb_tunnel_put() dropping the reference
count to zero even though we never called tb_dp_dprx_start() for it (we
never do that for discovery). This makes the discovered DP tunnel memory
to be released and any access after that causes use-after-free and
possible crash.
Fix this so that we only stop DPRX flow if it has been started in the
first place.
Reported-by: Kenneth Crudup <kenny@panix.com>
Closes: https://lore.kernel.org/linux-usb/8e175721-806f-45d6-892a-bd3356af80c9@panix.com/
Cc: stable@vger.kernel.org
Fixes: d6d458d42e1e ("thunderbolt: Handle DisplayPort tunnel activation asynchronously")
Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
A wiphy_work can be queued from the moment the wiphy is allocated and
initialized (i.e. wiphy_new_nm). When a wiphy_work is queued, the
rdev::wiphy_work is getting queued.
If wiphy_free is called before the rdev::wiphy_work had a chance to run,
the wiphy memory will be freed, and then when it eventally gets to run
it'll use invalid memory.
Fix this by canceling the work before freeing the wiphy.
Fixes: a3ee4dc84c4e ("wifi: cfg80211: add a work abstraction with special semantics")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250306123626.efd1d19f6e07.I48229f96f4067ef73f5b87302335e2fd750136c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When MLO is used and SA Query processing isn't done by
userspace (e.g. wpa_supplicant w/o CONFIG_OCV), then
the mac80211 code kicks in but uses the wrong addresses.
Fix them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250306123626.bab48bb49061.I9391b22f1360d20ac8c4e92604de23f27696ba8f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The refactoring of the assoc link handling in order to
support multi-link reconfiguration broke the setting
of the assoc link ID, and thus resulted in the wrong
BSS "use_for" value being selected. Fix that for both
association and ML reconfiguration.
Fixes: 720fa448f5a7 ("wifi: nl80211: Split the links handling of an association request")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250306123626.7b233d769c32.I62fd04a8667dd55cedb9a1c0414cc92dd098da75@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The worker really shouldn't be queued for a non-running interface.
Also, if ieee80211_setup_sdata is called between queueing and executing
the wk, it will be initialized, which will corrupt wiphy_work_list.
Fixes: f8891461a277 ("mac80211: do not start any work during reconfigure flow")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250306123626.1e02caf82640.I4949e71ed56e7186ed4968fa9ddff477473fa2f4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We first want to flush the station to make sure we no longer have any
frames being Tx by the station before the station is moved to
un-authorized state. Failing to do that will lead to races: a frame may
be sent after the station's state has been changed.
Since the API clearly states that the driver can't fail the sta_state()
transition down the list of state, we can easily flush the station
first, and only then call the driver's sta_state().
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250306123626.450bc40e8b04.I636ba96843c77f13309c15c9fd6eb0c5a52a7976@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If the restart work happens to run after the opmode left
(i.e. called iwl_trans_op_mode_leave), then the opmode memory (including
its mutex) is likely to be freed already, and trans->opmode is NULL.
Although the hw is stopped in that stage, which means that this restart
got aborted (i.e. STATUS_RESET_PENDING will be cleared),
it still can access trans->opmode (NULL pointer dereference)
or the opmodes memory (which is freed).
Fix this by canceling the restart wk in iwl_trans_op_mode_leave.
Also make sure that the restart wk is really aborted.
Fixes: 7391b2a4f7db ("wifi: iwlwifi: rework firmware error handling")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250306122425.801301ba1b8b.I6f6143f550b6335b699920c5d4b2b78449607a96@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When MSI-X is not enabled, we mask all the interrupts in the interrupt
handler and re-enable them when the interrupt thread runs. If
STATUS_INT_ENABLED is not set, we won't re-enable in the thread.
In order to get the ALIVE interrupt, we allow the ALIVE interrupt
itself, and RX as well in order to receive the ALIVE notification (which
is received as an RX from the firmware.
The problem is that STATUS_INT_ENABLED is clear until the op_mode calls
trans_fw_alive which means that until trans_fw_alive is called, any
notification from the firmware will not be received.
This became a problem when we inserted the pnvm_load exactly between the
ALIVE and trans_fw_alive.
Fix that by calling trans_fw_alive before loading the PNVM. This will
allow to get the notification from the firmware about PNVM load being
complete and continue the flow normally.
This didn't happen on MSI-X because we don't disable the interrupts in
the ISR when MSI-X is available.
The error in the log looks like this:
iwlwifi 0000:00:03.0: Timeout waiting for PNVM load!
iwlwifi 0000:00:03.0: Failed to start RT ucode: -110
iwlwifi 0000:00:03.0: WRT: Collecting data: ini trigger 13 fired (delay=0ms).
Fixes: 70d3ca86b025 ("iwlwifi: mvm: ring the doorbell and wait for PNVM load completion")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250306122425.0f2cf207aae1.I025d8f724b44f52eadf6c19069352eb9275613a8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The allocation of the scatter gather data structure should be done
based on the number of memory chunks that need to be mapped, and it
is not dependent on the overall payload length. Fix it.
In addition, as the skb_to_sgvec() function returns an 'int' do not
assign it to an 'unsigned int' as otherwise the error check would be
useless.
Fixes: 7f5e3038f029 ("wifi: iwlwifi: map entire SKB when sending AMSDUs")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250306122425.8c0e23a3d583.I3cb4d6768c9d28ce3da6cd0a6c65466176cfc1ee@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since I really don't want to be CC'ed on every patch
add X: entries for all the drivers that are otherwise
covered. In some cases, add a bit more to drivers that
have other entries, mostly for the vendor directories,
but for libertas also add libertas_tf.
While at it, also add all nl80211-related (vendor)
UAPI header files to the nl80211 entry.
Link: https://patch.msgid.link/20250306092831.f7fdfe7df7b2.I7c86da443038af32e9bcbaa5f53b1e4128a0d1f9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The fix to atomically read the pipe head and tail state when not holding
the pipe mutex has caused a number of headaches due to the size change
of the involved types.
It turns out that we don't have _that_ many places that access these
fields directly and were affected, but we have more than we strictly
should have, because our low-level helper functions have been designed
to have intimate knowledge of how the pipes work.
And as a result, that random noise of direct 'pipe->head' and
'pipe->tail' accesses makes it harder to pinpoint any actual potential
problem spots remaining.
For example, we didn't have a "is the pipe full" helper function, but
instead had a "given these pipe buffer indexes and this pipe size, is
the pipe full". That's because some low-level pipe code does actually
want that much more complicated interface.
But most other places literally just want a "is the pipe full" helper,
and not having it meant that those places ended up being unnecessarily
much too aware of this all.
It would have been much better if only the very core pipe code that
cared had been the one aware of this all.
So let's fix it - better late than never. This just introduces the
trivial wrappers for "is this pipe full or empty" and to get how many
pipe buffers are used, so that instead of writing
if (pipe_full(pipe->head, pipe->tail, pipe->max_usage))
the places that literally just want to know if a pipe is full can just
say
if (pipe_is_full(pipe))
instead. The existing trivial cases were converted with a 'sed' script.
This cuts down on the places that access pipe->head and pipe->tail
directly outside of the pipe code (and core splice code) quite a lot.
The splice code in particular still revels in doing the direct low-level
accesses, and the fuse fuse_dev_splice_write() code also seems a bit
unnecessarily eager to go very low-level, but it's at least a bit better
than it used to be.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull drm fixes from Dave Airlie:
"Fixes across the board, mostly xe and imagination with some amd and
misc others.
The xe fixes are mostly hmm related, though there are some others in
there as well, nothing really stands out otherwise.
The nouveau Kconfig to select FW_CACHE is in this, which we discussed
a while back.
nouveau:
- rely on fw caching Kconfig fix
imagination:
- avoid deadlock on fence release
- fix fence initialisation
- fix timestamps firmware traces
scheduler:
- fix include guard
bochs:
- dpms fix
i915:
- bump max stream count to match pipes
xe:
- Remove double page flip on initial plane
- Properly setup userptr pfn_flags_mask
- Fix GT "for each engine" workarounds
- Fix userptr races and missed validations
- Userptr invalid page access fixes
- Cleanup some style nits
amdgpu:
- Fix NULL check in DC code
- SMU 14 fix
amdkfd:
- Fix NULL check in queue validation
radeon:
- RS400 HyperZ fix"
* tag 'drm-fixes-2025-03-07' of https://gitlab.freedesktop.org/drm/kernel: (22 commits)
drm/bochs: Fix DPMS regression
drm/xe/userptr: Unmap userptrs in the mmu notifier
drm/xe/hmm: Don't dereference struct page pointers without notifier lock
drm/xe/hmm: Style- and include fixes
drm/xe: Add staging tree for VM binds
drm/xe: Fix fault mode invalidation with unbind
drm/xe/vm: Fix a misplaced #endif
drm/xe/vm: Validate userptr during gpu vma prefetching
drm/amd/pm: always allow ih interrupt from fw
drm/radeon: Fix rs400_gpu_init for ATI mobility radeon Xpress 200M
drm/amdkfd: Fix NULL Pointer Dereference in KFD queue
drm/amd/display: Fix null check for pipe_ctx->plane_state in resource_build_scaling_params
drm/xe: Fix GT "for each engine" workarounds
drm/xe/userptr: properly setup pfn_flags_mask
drm/i915/mst: update max stream count to match number of pipes
drm/xe: Remove double pageflip
drm/sched: Fix preprocessor guard
drm/imagination: Fix timestamps in firmware traces
drm/imagination: only init job done fences once
drm/imagination: Hold drm_gem_gpuva lock for unmap
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix racy non-atomic read-then-increment operation with
PREEMPT_RT in nft_ct, from Sebastian Andrzej Siewior.
2) GC is not skipped when jiffies wrap around in nf_conncount,
from Nicklas Bo Jensen.
3) flush_work() on nf_tables_destroy_work waits for the last queued
instance, this could be an instance that is different from the one
that we must wait for, then make destruction work queue.
* tag 'nf-25-03-06' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: make destruction work queue pernet
netfilter: nf_conncount: garbage collection is not skipped when jiffies wrap around
netfilter: nft_ct: Use __refcount_inc() for per-CPU nft_ct_pcpu_template.
====================
Link: https://patch.msgid.link/20250306153446.46712-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 5f89154e8e9e3445f9b59 ("block: Use enum to define RQF_x bit
indexes") converted the RQF flags to an anonymous enum, which was
a beneficial change. This patch goes one step further by naming the enum
as "rqf_flags".
This naming enables exporting these flags to BPF clients, eliminating
the need to duplicate these flags in BPF code. Instead, BPF clients can
now access the same kernel-side values through CO:RE (Compile Once, Run
Everywhere), as shown in this example:
rqf_stats = bpf_core_enum_value(enum rqf_flags, __RQF_STATS)
Suggested-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20250306-rqf_flags-v1-1-bbd64918b406@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If kzalloc in gred_init returns a NULL pointer, the code follows the
error handling path, invoking gred_destroy. This, in turn, calls
gred_offload, where memset could receive a NULL pointer as input,
potentially leading to a kernel crash.
When table->opt is NULL in gred_init(), gred_change_table_def()
is not called yet, so it is not necessary to call ->ndo_setup_tc()
in gred_offload().
Signed-off-by: Jun Yang <juny24602@gmail.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Fixes: f25c0515c521 ("net: sched: gred: dynamically allocate tc_gred_qopt_offload")
Link: https://patch.msgid.link/20250305154410.3505642-1-juny24602@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-03-05 (ice)
This series contains updates to ice driver.
Larysa removes modification of destination override that caused LLDP
packets to be blocked.
Grzegorz fixes a memory leak in aRFS.
Marcin resolves an issue with operation of switchdev and LAG.
Przemek adjusts order of calls for registering devlink in relation to
health reporters.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: register devlink prior to creating health reporters
ice: Fix switchdev slow-path in LAG
ice: fix memory leak in aRFS after reset
ice: do not configure destination override for switchdev
====================
Link: https://patch.msgid.link/20250305213549.1514274-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.14-2025-03-06:
amdgpu:
- Fix NULL check in DC code
- SMU 14 fix
amdkfd:
- Fix NULL check in queue validation
radeon:
- RS400 HyperZ fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306193424.27413-1-alexander.deucher@amd.com
|
|
Pull bcachefs fixes from Kent Overstreet:
- Fix a compatibility issue: we shouldn't be setting incompat feature
bits unless explicitly requested
- Fix another bug where the journal alloc/resize path could spuriously
fail with -BCH_ERR_open_buckets_empty
- Copygc shouldn't run on read-only devices: fragmentation isn't an
issue if we're not currently writing to a given device, and it may
not have anywhere to move the data to
* tag 'bcachefs-2025-03-06' of git://evilpiepirate.org/bcachefs:
bcachefs: copygc now skips non-rw devices
bcachefs: Fix bch2_dev_journal_alloc() spuriously failing
bcachefs: Don't set BCH_FEATURE_incompat_version_field unless requested
|
|
There's no point in doing copygc on non-rw devices: the fragmentation
doesn't matter if we're not writing to them, and we may not have
anywhere to put the data on our other devices.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Previously, we fixed journal resize spuriousl failing with
-BCH_ERR_open_buckets_empty, but initial journal allocation was missed
because it didn't invoke the "block on allocator" loop at all.
Factor out the "loop on allocator" code to fix that.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Remove double page flip on initial plane (Maarten)
- Properly setup userptr pfn_flags_mask (Auld)
- Fix GT "for each engine" workarounds (Tvrtko)
- Fix userptr races and missed validations (Thomas, Brost)
- Userptr invalid page access fixes (Thomas)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z8ni6w3tskCFL11O@intel.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- DP MST fix (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z8ng8NjmRGiVcb5t@intel.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A Kconfig fix for nouveau, locking and timestamp fixes for imagination,
a header guard fix for sched and a DPMS regression fix for bochs.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306-antelope-of-imminent-anger-bca19e@houat
|
|
The 5-level paging code parses the command line to look for the 'no5lvl'
string, and does so very early, before sanitize_boot_params() has been
called and has been given the opportunity to wipe bogus data from the
fields in boot_params that are not covered by struct setup_header, and
are therefore supposed to be initialized to zero by the bootloader.
This triggers an early boot crash when using syslinux-efi to boot a
recent kernel built with CONFIG_X86_5LEVEL=y and CONFIG_EFI_STUB=n, as
the 0xff padding that now fills the unused PE/COFF header is copied into
boot_params by the bootloader, and interpreted as the top half of the
command line pointer.
Fix this by sanitizing the boot_params before use. Note that there is no
harm in calling this more than once; subsequent invocations are able to
spot that the boot_params have already been cleaned up.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org> # v6.1+
Link: https://lore.kernel.org/r/20250306155915.342465-2-ardb+git@google.com
Closes: https://lore.kernel.org/all/202503041549.35913.ulrich.gemkow@ikr.uni-stuttgart.de
|
|
The documentation examples in rust/kernel/workqueue.rs use pr_info!
calls that lack a trailing newline. To maintain consistency with
kernel logging practices, this patch adds the newline to all
affected examples.
Fixes: 15b286d1fd05 ("rust: workqueue: add examples")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1139
Signed-off-by: Alban Kurti <kurti@invicto.ai>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250206-printing_fix-v3-5-a85273b501ae@invicto.ai
[ Replaced Closes with Link since it fixes part of the issue. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The pr_info! example in rust/kernel/sync/locked_by.rs was missing
a newline. This patch appends the missing newline to ensure
that log messages for locked resources display correctly.
Fixes: 7b1f55e3a984 ("rust: sync: introduce `LockedBy`")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1139
Signed-off-by: Alban Kurti <kurti@invicto.ai>
Link: https://lore.kernel.org/r/20250206-printing_fix-v3-4-a85273b501ae@invicto.ai
[ Replaced Closes with Link since it fixes part of the issue. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Several pr_info! calls in rust/kernel/init.rs (both in code examples
and macro documentation) were missing a newline, causing logs to
run together. This commit updates these calls to include a trailing
newline, improving readability and consistency with the C side.
Fixes: 6841d45a3030 ("rust: init: add `stack_pin_init!` macro")
Fixes: 7f8977a7fe6d ("rust: init: add `{pin_}chain` functions to `{Pin}Init<T, E>`")
Fixes: d0fdc3961270 ("rust: init: add `PinnedDrop` trait and macros")
Fixes: 4af84c6a85c6 ("rust: init: update expanded macro explanation")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1139
Signed-off-by: Alban Kurti <kurti@invicto.ai>
Link: https://lore.kernel.org/r/20250206-printing_fix-v3-3-a85273b501ae@invicto.ai
[ Replaced Closes with Link since it fixes part of the issue. Added
one more Fixes tag (still same set of stable kernels). - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and wireless.
Current release - new code bugs:
- wifi: nl80211: disable multi-link reconfiguration
Previous releases - regressions:
- gso: fix ownership in __udp_gso_segment
- wifi: iwlwifi:
- fix A-MSDU TSO preparation
- free pages allocated when failing to build A-MSDU
- ipv6: fix dst ref loop in ila lwtunnel
- mptcp: fix 'scheduling while atomic' in
mptcp_pm_nl_append_new_local_addr
- bluetooth: add check for mgmt_alloc_skb() in
mgmt_device_connected()
- ethtool: allow NULL nlattrs when getting a phy_device
- eth: be2net: fix sleeping while atomic bugs in
be_ndo_bridge_getlink
Previous releases - always broken:
- core: support TCP GSO case for a few missing flags
- wifi: mac80211:
- fix vendor-specific inheritance
- cleanup sta TXQs on flush
- llc: do not use skb_get() before dev_queue_xmit()
- eth: ipa: nable checksum for IPA_ENDPOINT_AP_MODEM_{RX,TX}
for v4.7"
* tag 'net-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (41 commits)
net: ipv6: fix missing dst ref drop in ila lwtunnel
net: ipv6: fix dst ref loop in ila lwtunnel
mctp i3c: handle NULL header address
net: dsa: mt7530: Fix traffic flooding for MMIO devices
net-timestamp: support TCP GSO case for a few missing flags
vlan: enforce underlying device type
mptcp: fix 'scheduling while atomic' in mptcp_pm_nl_append_new_local_addr
net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device
ppp: Fix KMSAN uninit-value warning with bpf
net: ipa: Enable checksum for IPA_ENDPOINT_AP_MODEM_{RX,TX} for v4.7
net: ipa: Fix QSB data for v4.7
net: ipa: Fix v4.7 resource group names
net: hns3: make sure ptp clock is unregister and freed if hclge_ptp_get_cycle returns an error
wifi: nl80211: disable multi-link reconfiguration
net: dsa: rtl8366rb: don't prompt users for LED control
be2net: fix sleeping while atomic bugs in be_ndo_bridge_getlink
llc: do not use skb_get() before dev_queue_xmit()
wifi: cfg80211: regulatory: improve invalid hints checking
caif_virtio: fix wrong pointer check in cfv_probe()
net: gso: fix ownership in __udp_gso_segment
...
|
|
Pull smb fixes from Steve French:
"Five SMB server fixes, two related client fixes, and minor MAINTAINERS
update:
- Two SMB3 lock fixes fixes (including use after free and bug on fix)
- Fix to race condition that can happen in processing IPC responses
- Four ACL related fixes: one related to endianness of num_aces, and
two related fixes to the checks for num_aces (for both client and
server), and one fixing missing check for num_subauths which can
cause memory corruption
- And minor update to email addresses in MAINTAINERS file"
* tag 'v6.14-rc5-smb3-fixes' of git://git.samba.org/ksmbd:
cifs: fix incorrect validation for num_aces field of smb_acl
ksmbd: fix incorrect validation for num_aces field of smb_acl
smb: common: change the data type of num_aces to le16
ksmbd: fix bug on trap in smb2_lock
ksmbd: fix use-after-free in smb2_lock
ksmbd: fix type confusion via race condition when using ipc_msg_send_request
ksmbd: fix out-of-bounds in parse_sec_desc()
MAINTAINERS: update email address in cifs and ksmbd entry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat fixes from Namjae Jeon:
- Optimize new cluster allocation by correctly find empty entry slot
- Add a check to prevent excessive bitmap clearing due to invalid
data size of file/dir entry
- Fix incorrect error return for zero-byte writes
* tag 'exfat-for-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: add a check for invalid data size
exfat: short-circuit zero-byte writes in exfat_file_write_iter
exfat: fix soft lockup in exfat_clear_bitmap
exfat: fix just enough dentries but allocate a new cluster to dir
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix spelling mistakes in idmappings.rst
- Fix RCU warnings in override_creds()/revert_creds()
- Create new pid namespaces with default limit now that pid_max is
namespaced
* tag 'vfs-6.14-rc6.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
pid: Do not set pid_max in new pid namespaces
doc: correcting two prefix errors in idmappings.rst
cred: Fix RCU warnings in override/revert_creds
|
|
This was another case that Rasmus pointed out where the direct access to
the pipe head and tail pointers broke on 32-bit configurations due to
the type changes.
As with the pipe FIONREAD case, fix it by using the appropriate helper
functions that deal with the right pipe index sizing.
Reported-by: Rasmus Villemoes <ravi@prevas.dk>
Link: https://lore.kernel.org/all/878qpi5wz4.fsf@prevas.dk/
Fixes: 3d252160b818 ("fs/pipe: Read pipe->{head,tail} atomically outside pipe->mutex")Cc: Oleg >
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Rasmus points out that we do indeed have other cases of breakage from
the type changes that were introduced on 32-bit targets in order to read
the pipe head and tail values atomically (commit 3d252160b818: "fs/pipe:
Read pipe->{head,tail} atomically outside pipe->mutex").
Fix it up by using the proper helper functions that now deal with the
pipe buffer index types properly. This makes the code simpler and more
obvious.
The compiler does the CSE and loop hoisting of the pipe ring size
masking that we used to do manually, so open-coding this was never a
good idea.
Reported-by: Rasmus Villemoes <ravi@prevas.dk>
Link: https://lore.kernel.org/all/87cyeu5zgk.fsf@prevas.dk/
Fixes: 3d252160b818 ("fs/pipe: Read pipe->{head,tail} atomically outside pipe->mutex")Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
That's what 'pipe_full()' does, so it's more consistent. But more
importantly it gets the type limits right when the pipe head and tail
are no longer necessarily 'unsigned int'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Resources should be released only after all threads that utilize them
have been destroyed.
This commit ensures that resources are not released prematurely by waiting
for the associated workqueue to complete before deallocating them.
Cc: stable <stable@kernel.org>
Fixes: b9aa02ca39a4 ("usb: typec: ucsi: Add polling mechanism for partner tasks like alt mode checking")
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250305111739.1489003-2-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When used on Huawei hisi platforms, Prolific Mass Storage Card Reader
which the VID:PID is in 067b:2731 might fail to enumerate at boot time
and doesn't work well with LPM enabled, combination quirks:
USB_QUIRK_DELAY_INIT + USB_QUIRK_NO_LPM
fixed the problems.
Signed-off-by: Miao Li <limiao@kylinos.cn>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250304070757.139473-1-limiao870622@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When GENERIC_IRQ_CHIP is disabled, OMAP1 kernels fail to link:
arm-linux-gnueabi-ld: arch/arm/mach-omap1/irq.o: in function `omap1_init_irq':
irq.c:(.init.text+0x1e8): undefined reference to `irq_alloc_generic_chip'
arm-linux-gnueabi-ld: irq.c:(.init.text+0x228): undefined reference to `irq_setup_generic_chip'
arm-linux-gnueabi-ld: irq.c:(.init.text+0x2a8): undefined reference to `irq_gc_set_wake'
arm-linux-gnueabi-ld: irq.c:(.init.text+0x2b0): undefined reference to `irq_gc_mask_set_bit'
arm-linux-gnueabi-ld: irq.c:(.init.text+0x2b4): undefined reference to `irq_gc_mask_clr_bit'
This has apparently been the case for many years, but I never caught it
in randconfig builds until now, as there are dozens of other drivers
that also 'select GENERIC_IRQ_CHIP' and statistically there is almost
always one of them enabled.
Fixes: 55b447744389 ("ARM: OMAP1: Switch to use generic irqchip in preparation for sparse IRQ")
Link: https://lore.kernel.org/r/20250205121151.289535-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V Devicetree fix for v6.14-rc6
A single fix for an incorrect define in the jh7110 pinctrl header.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-fixes-for-v6.14-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: starfive: Fix a typo in StarFive JH7110 pin function definitions
Link: https://lore.kernel.org/r/20250305-sip-unable-d56ef7dbf86b@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.14:
- A tqma8mpql board fix from Alexander Stein to correct vqmmc-supply for
usdhc3
- A change from Joe Hattori to fix OF node leak in imx-scu driver probe
- A soc-imx8m driver fix from Peng Fan unregister cpufreq and soc device
in cleanup path
- A couple of changes from Stefan Eichenberger to fix iMX6 Apalis
poweroff and iMX8M verdin-dahlia sound-card descriptions
* tag 'imx-fixes-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: freescale: imx8mm-verdin-dahlia: add Microphone Jack to sound card
arm64: dts: freescale: imx8mp-verdin-dahlia: add Microphone Jack to sound card
soc: imx8m: Unregister cpufreq and soc dev in cleanup path
ARM: dts: imx6qdl-apalis: Fix poweroff on Apalis iMX6
arm64: dts: freescale: tqma8mpql: Fix vqmmc-supply
firmware: imx-scu: fix OF node leak in .probe()
Link: https://lore.kernel.org/r/Z8A+rihFV4K3l8QR@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM64-based SoCs Device Tree fixes
for 6.14, please pull the following:
- Phil fixes the Raspberry Pi 5 PL011 UART primecell ID to indicate it
is r1p5 and thus has a 32-byte FIFO
* tag 'arm-soc/for-6.14/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux:
arm64: dts: bcm2712: PL011 UARTs are actually r1p5
Link: https://lore.kernel.org/r/20250225194041.1063762-2-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
6.14:
- Stefan fixes the xHCI power domain on the Raspberry Pi 4
- Phil fixes the Raspberry Pi 4 PL011 UART primecell ID to indicate they are
r1p5 and thus have a 32-byte FIFO
* tag 'arm-soc/for-6.14/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2711: PL011 UARTs are actually r1p5
ARM: dts: bcm2711: Fix xHCI power-domain
Link: https://lore.kernel.org/r/20250225194041.1063762-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
