summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-08-16x86/alternative: Make custom return thunk unconditionalPeter Zijlstra
There is infrastructure to rewrite return thunks to point to any random thunk one desires, unwrap that from CALL_THUNKS, which up to now was the sole user of that. [ bp: Make the thunks visible on 32-bit and add ifdeffery for the 32-bit builds. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20230814121148.775293785@infradead.org
2023-08-16objtool/x86: Fix SRSO messPeter Zijlstra
Objtool --rethunk does two things: - it collects all (tail) call's of __x86_return_thunk and places them into .return_sites. These are typically compiler generated, but RET also emits this same. - it fudges the validation of the __x86_return_thunk symbol; because this symbol is inside another instruction, it can't actually find the instruction pointed to by the symbol offset and gets upset. Because these two things pertained to the same symbol, there was no pressing need to separate these two separate things. However, alas, along comes SRSO and more crazy things to deal with appeared. The SRSO patch itself added the following symbol names to identify as rethunk: 'srso_untrain_ret', 'srso_safe_ret' and '__ret' Where '__ret' is the old retbleed return thunk, 'srso_safe_ret' is a new similarly embedded return thunk, and 'srso_untrain_ret' is completely unrelated to anything the above does (and was only included because of that INT3 vs UD2 issue fixed previous). Clear things up by adding a second category for the embedded instruction thing. Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20230814121148.704502245@infradead.org
2023-08-16x86/cpu: Fix up srso_safe_ret() and __x86_return_thunk()Peter Zijlstra
vmlinux.o: warning: objtool: srso_untrain_ret() falls through to next function __x86_return_skl() vmlinux.o: warning: objtool: __x86_return_thunk() falls through to next function __x86_return_skl() This is because these functions (can) end with CALL, which objtool does not consider a terminating instruction. Therefore, replace the INT3 instruction (which is a non-fatal trap) with UD2 (which is a fatal-trap). This indicates execution will not continue past this point. Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20230814121148.637802730@infradead.org
2023-08-16x86/cpu: Fix __x86_return_thunk symbol typePeter Zijlstra
Commit fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation") reimplemented __x86_return_thunk with a mix of SYM_FUNC_START and SYM_CODE_END, this is not a sane combination. Since nothing should ever actually 'CALL' this, make it consistently CODE. Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20230814121148.571027074@infradead.org
2023-08-16broadcom: b44: Use b44_writephy() return valueArtem Chernyshev
Return result of b44_writephy() instead of zero to deal with possible error. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16smb: client: fix null authScott Mayhew
Commit abdb1742a312 removed code that clears ctx->username when sec=none, so attempting to mount with '-o sec=none' now fails with -EACCES. Fix it by adding that logic to the parsing of the 'sec' option, as well as checking if the mount is using null auth before setting the username when parsing the 'user' option. Fixes: abdb1742a312 ("cifs: get rid of mount options string parsing") Cc: stable@vger.kernel.org Signed-off-by: Scott Mayhew <smayhew@redhat.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-08-15net: openvswitch: reject negative ifindexJakub Kicinski
Recent changes in net-next (commit 759ab1edb56c ("net: store netdevs in an xarray")) refactored the handling of pre-assigned ifindexes and let syzbot surface a latent problem in ovs. ovs does not validate ifindex, making it possible to create netdev ports with negative ifindex values. It's easy to repro with YNL: $ ./cli.py --spec netlink/specs/ovs_datapath.yaml \ --do new \ --json '{"upcall-pid": 1, "name":"my-dp"}' $ ./cli.py --spec netlink/specs/ovs_vport.yaml \ --do new \ --json '{"upcall-pid": "00000001", "name": "some-port0", "dp-ifindex":3,"ifindex":4294901760,"type":2}' $ ip link show -65536: some-port0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 7a:48:21:ad:0b:fb brd ff:ff:ff:ff:ff:ff ... Validate the inputs. Now the second command correctly returns: $ ./cli.py --spec netlink/specs/ovs_vport.yaml \ --do new \ --json '{"upcall-pid": "00000001", "name": "some-port0", "dp-ifindex":3,"ifindex":4294901760,"type":2}' lib.ynl.NlError: Netlink error: Numerical result out of range nl_len = 108 (92) nl_flags = 0x300 nl_type = 2 error: -34 extack: {'msg': 'integer out of range', 'unknown': [[type:4 len:36] b'\x0c\x00\x02\x00\x00\x00\x00\x00\x00\x00\x00\x00\x0c\x00\x03\x00\xff\xff\xff\x7f\x00\x00\x00\x00\x08\x00\x01\x00\x08\x00\x00\x00'], 'bad-attr': '.ifindex'} Accept 0 since it used to be silently ignored. Fixes: 54c4ef34c4b6 ("openvswitch: allow specifying ifindex of new interfaces") Reported-by: syzbot+7456b5dcf65111553320@syzkaller.appspotmail.com Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Aaron Conole <aconole@redhat.com> Link: https://lore.kernel.org/r/20230814203840.2908710-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-15team: Fix incorrect deletion of ETH_P_8021AD protocol vid from slavesZiyang Xuan
Similar to commit 01f4fd270870 ("bonding: Fix incorrect deletion of ETH_P_8021AD protocol vid from slaves"), we can trigger BUG_ON(!vlan_info) in unregister_vlan_dev() with the following testcase: # ip netns add ns1 # ip netns exec ns1 ip link add team1 type team # ip netns exec ns1 ip link add team_slave type veth peer veth2 # ip netns exec ns1 ip link set team_slave master team1 # ip netns exec ns1 ip link add link team_slave name team_slave.10 type vlan id 10 protocol 802.1ad # ip netns exec ns1 ip link add link team1 name team1.10 type vlan id 10 protocol 802.1ad # ip netns exec ns1 ip link set team_slave nomaster # ip netns del ns1 Add S-VLAN tag related features support to team driver. So the team driver will always propagate the VLAN info to its slaves. Fixes: 8ad227ff89a7 ("net: vlan: add 802.1ad support") Suggested-by: Ido Schimmel <idosch@idosch.org> Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230814032301.2804971-1-william.xuanziyang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-15net: phy: broadcom: stub c45 read/write for 54810Justin Chen
The 54810 does not support c45. The mmd_phy_indirect accesses return arbirtary values leading to odd behavior like saying it supports EEE when it doesn't. We also see that reading/writing these non-existent MMD registers leads to phy instability in some cases. Fixes: b14995ac2527 ("net: phy: broadcom: Add BCM54810 PHY entry") Signed-off-by: Justin Chen <justin.chen@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/1691901708-28650-1-git-send-email-justin.chen@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-16netfilter: nft_dynset: disallow object mapsPablo Neira Ayuso
Do not allow to insert elements from datapath to objects maps. Fixes: 8aeff920dcc9 ("netfilter: nf_tables: add stateful object reference to set elements") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de>
2023-08-16netfilter: nf_tables: GC transaction race with netns dismantlePablo Neira Ayuso
Use maybe_get_net() since GC workqueue might race with netns exit path. Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de>
2023-08-16netfilter: nf_tables: fix GC transaction races with netns and netlink event ↵Pablo Neira Ayuso
exit path Netlink event path is missing a synchronization point with GC transactions. Add GC sequence number update to netns release path and netlink event path, any GC transaction losing race will be discarded. Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de>
2023-08-16ipvs: fix racy memcpy in proc_do_sync_thresholdSishuai Gong
When two threads run proc_do_sync_threshold() in parallel, data races could happen between the two memcpy(): Thread-1 Thread-2 memcpy(val, valp, sizeof(val)); memcpy(valp, val, sizeof(val)); This race might mess up the (struct ctl_table *) table->data, so we add a mutex lock to serialize them. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/netdev/B6988E90-0A1E-4B85-BF26-2DAF6D482433@gmail.com/ Signed-off-by: Sishuai Gong <sishuai.system@gmail.com> Acked-by: Simon Horman <horms@kernel.org> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Florian Westphal <fw@strlen.de>
2023-08-16netfilter: set default timeout to 3 secs for sctp shutdown send and recv stateXin Long
In SCTP protocol, it is using the same timer (T2 timer) for SHUTDOWN and SHUTDOWN_ACK retransmission. However in sctp conntrack the default timeout value for SCTP_CONNTRACK_SHUTDOWN_ACK_SENT state is 3 secs while it's 300 msecs for SCTP_CONNTRACK_SHUTDOWN_SEND/RECV state. As Paolo Valerio noticed, this might cause unwanted expiration of the ct entry. In my test, with 1s tc netem delay set on the NAT path, after the SHUTDOWN is sent, the sctp ct entry enters SCTP_CONNTRACK_SHUTDOWN_SEND state. However, due to 300ms (too short) delay, when the SHUTDOWN_ACK is sent back from the peer, the sctp ct entry has expired and been deleted, and then the SHUTDOWN_ACK has to be dropped. Also, it is confusing these two sysctl options always show 0 due to all timeout values using sec as unit: net.netfilter.nf_conntrack_sctp_timeout_shutdown_recd = 0 net.netfilter.nf_conntrack_sctp_timeout_shutdown_sent = 0 This patch fixes it by also using 3 secs for sctp shutdown send and recv state in sctp conntrack, which is also RTO.initial value in SCTP protocol. Note that the very short time value for SCTP_CONNTRACK_SHUTDOWN_SEND/RECV was probably used for a rare scenario where SHUTDOWN is sent on 1st path but SHUTDOWN_ACK is replied on 2nd path, then a new connection started immediately on 1st path. So this patch also moves from SHUTDOWN_SEND/RECV to CLOSE when receiving INIT in the ORIGINAL direction. Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.") Reported-by: Paolo Valerio <pvalerio@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Florian Westphal <fw@strlen.de>
2023-08-16netfilter: nf_tables: don't fail inserts if duplicate has expiredFlorian Westphal
nftables selftests fail: run-tests.sh testcases/sets/0044interval_overlap_0 Expected: 0-2 . 0-3, got: W: [FAILED] ./testcases/sets/0044interval_overlap_0: got 1 Insertion must ignore duplicate but expired entries. Moreover, there is a strange asymmetry in nft_pipapo_activate: It refetches the current element, whereas the other ->activate callbacks (bitmap, hash, rhash, rbtree) use elem->priv. Same for .remove: other set implementations take elem->priv, nft_pipapo_remove fetches elem->priv, then does a relookup, remove this. I suspect this was the reason for the change that prompted the removal of the expired check in pipapo_get() in the first place, but skipping exired elements there makes no sense to me, this helper is used for normal get requests, insertions (duplicate check) and deactivate callback. In first two cases expired elements must be skipped. For ->deactivate(), this gets called for DELSETELEM, so it seems to me that expired elements should be skipped as well, i.e. delete request should fail with -ENOENT error. Fixes: 24138933b97b ("netfilter: nf_tables: don't skip expired elements during walk") Signed-off-by: Florian Westphal <fw@strlen.de>
2023-08-16netfilter: nf_tables: deactivate catchall elements in next generationFlorian Westphal
When flushing, individual set elements are disabled in the next generation via the ->flush callback. Catchall elements are not disabled. This is incorrect and may lead to double-deactivations of catchall elements which then results in memory leaks: WARNING: CPU: 1 PID: 3300 at include/net/netfilter/nf_tables.h:1172 nft_map_deactivate+0x549/0x730 CPU: 1 PID: 3300 Comm: nft Not tainted 6.5.0-rc5+ #60 RIP: 0010:nft_map_deactivate+0x549/0x730 [..] ? nft_map_deactivate+0x549/0x730 nf_tables_delset+0xb66/0xeb0 (the warn is due to nft_use_dec() detecting underflow). Fixes: aaa31047a6d2 ("netfilter: nftables: add catch-all set element support") Reported-by: lonial con <kongln9170@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de>
2023-08-16netfilter: nf_tables: fix kdoc warnings after gc reworkFlorian Westphal
Jakub Kicinski says: We've got some new kdoc warnings here: net/netfilter/nft_set_pipapo.c:1557: warning: Function parameter or member '_set' not described in 'pipapo_gc' net/netfilter/nft_set_pipapo.c:1557: warning: Excess function parameter 'set' description in 'pipapo_gc' include/net/netfilter/nf_tables.h:577: warning: Function parameter or member 'dead' not described in 'nft_set' Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane") Fixes: f6c383b8c31a ("netfilter: nf_tables: adapt set backend to use GC transaction API") Reported-by: Jakub Kicinski <kuba@kernel.org> Closes: https://lore.kernel.org/netdev/20230810104638.746e46f1@kernel.org/ Signed-off-by: Florian Westphal <fw@strlen.de>
2023-08-16netfilter: nf_tables: fix false-positive lockdep splatFlorian Westphal
->abort invocation may cause splat on debug kernels: WARNING: suspicious RCU usage net/netfilter/nft_set_pipapo.c:1697 suspicious rcu_dereference_check() usage! [..] rcu_scheduler_active = 2, debug_locks = 1 1 lock held by nft/133554: [..] (nft_net->commit_mutex){+.+.}-{3:3}, at: nf_tables_valid_genid [..] lockdep_rcu_suspicious+0x1ad/0x260 nft_pipapo_abort+0x145/0x180 __nf_tables_abort+0x5359/0x63d0 nf_tables_abort+0x24/0x40 nfnetlink_rcv+0x1a0a/0x22c0 netlink_unicast+0x73c/0x900 netlink_sendmsg+0x7f0/0xc20 ____sys_sendmsg+0x48d/0x760 Transaction mutex is held, so parallel updates are not possible. Switch to _protected and check mutex is held for lockdep enabled builds. Fixes: 212ed75dc5fb ("netfilter: nf_tables: integrate pipapo into commit protocol") Signed-off-by: Florian Westphal <fw@strlen.de>
2023-08-15fbdev: goldfishfb: Do not check 0 for platform_get_irq()Zhu Wang
Since platform_get_irq() never returned zero, so it need not to check whether it returned zero, and we use the return error code of platform_get_irq() to replace the current return error code. Please refer to the commit a85a6c86c25b ("driver core: platform: Clarify that IRQ 0 is invalid") to get that platform_get_irq() never returned zero. Signed-off-by: Zhu Wang <wangzhu9@huawei.com> Signed-off-by: Helge Deller <deller@gmx.de>
2023-08-15fbdev: atmel_lcdfb: Remove redundant of_match_ptr()Ruan Jinjie
The driver depends on CONFIG_OF, it is not necessary to use of_match_ptr() here. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Signed-off-by: Helge Deller <deller@gmx.de>
2023-08-15fbdev: kyro: Remove unused declarationsYue Haibing
These declarations is never implemented since the beginning of git history. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Signed-off-by: Helge Deller <deller@gmx.de>
2023-08-15Merge tag 'parisc-for-6.5-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fix from Helge Deller: "Fix the parisc TLB ptlock checks so that they can be enabled together with the lightweight spinlock checks" * tag 'parisc-for-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix CONFIG_TLB_PTLOCK to work with lightweight spinlock checks
2023-08-15Merge tag '6.5-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull smb client fixes from Steve French: "Three smb client fixes, all for stable: - fix for oops in unmount race with lease break of deferred close - debugging improvement for reconnect - fix for fscache deadlock (folio_wait_bit_common hang)" * tag '6.5-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: smb3: display network namespace in debug information cifs: Release folio lock on fscache read hit. cifs: fix potential oops in cifs_oplock_break
2023-08-15Merge tag 'regulator-fix-v6.5-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "Two small driver specific fixes: one incorrect definition for one of the Qualcomm regulators and better handling of poorly formed DTs in the DA9063 driver" * tag 'regulator-fix-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: qcom-rpmh: Fix LDO 12 regulator for PM8550 regulator: da9063: better fix null deref with partial DT
2023-08-15net: fix the RTO timer retransmitting skb every 1ms if linear option is enabledJason Xing
In the real workload, I encountered an issue which could cause the RTO timer to retransmit the skb per 1ms with linear option enabled. The amount of lost-retransmitted skbs can go up to 1000+ instantly. The root cause is that if the icsk_rto happens to be zero in the 6th round (which is the TCP_THIN_LINEAR_RETRIES value), then it will always be zero due to the changed calculation method in tcp_retransmit_timer() as follows: icsk->icsk_rto = min(icsk->icsk_rto << 1, TCP_RTO_MAX); Above line could be converted to icsk->icsk_rto = min(0 << 1, TCP_RTO_MAX) = 0 Therefore, the timer expires so quickly without any doubt. I read through the RFC 6298 and found that the RTO value can be rounded up to a certain value, in Linux, say TCP_RTO_MIN as default, which is regarded as the lower bound in this patch as suggested by Eric. Fixes: 36e31b0af587 ("net: TCP thin linear timeouts") Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-15Merge tag 'asoc-fix-v6.5-rc6' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.5 A fairly large collection of fixes here, mostly SOF and Intel related. The one core fix is Hans' change which reduces the log spam when working out new use cases for DPCM.
2023-08-15MAINTAINERS: Add entries for TEXAS INSTRUMENTS ASoC DRIVERSKevin-Lu
Add the MAINTAINERS entries for TEXAS INSTRUMENTS ASoC DRIVERS. Signed-off-by: Kevin-Lu <kevin-lu@ti.com> Link: https://lore.kernel.org/r/20230815095631.1655-1-kevin-lu@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-15accel/qaic: Clean up integer overflow checking in map_user_pages()Dan Carpenter
The encode_dma() function has some validation on in_trans->size but it would be more clear to move those checks to find_and_map_user_pages(). The encode_dma() had two checks: if (in_trans->addr + in_trans->size < in_trans->addr || !in_trans->size) return -EINVAL; The in_trans->addr variable is the starting address. The in_trans->size variable is the total size of the transfer. The transfer can occur in parts and the resources->xferred_dma_size tracks how many bytes we have already transferred. This patch introduces a new variable "remaining" which represents the amount we want to transfer (in_trans->size) minus the amount we have already transferred (resources->xferred_dma_size). I have modified the check for if in_trans->size is zero to instead check if in_trans->size is less than resources->xferred_dma_size. If we have already transferred more bytes than in_trans->size then there are negative bytes remaining which doesn't make sense. If there are zero bytes remaining to be copied, just return success. The check in encode_dma() checked that "addr + size" could not overflow and barring a driver bug that should work, but it's easier to check if we do this in parts. First check that "in_trans->addr + resources->xferred_dma_size" is safe. Then check that "xfer_start_addr + remaining" is safe. My final concern was that we are dealing with u64 values but on 32bit systems the kmalloc() function will truncate the sizes to 32 bits. So I calculated "total = in_trans->size + offset_in_page(xfer_start_addr);" and returned -EINVAL if it were >= SIZE_MAX. This will not affect 64bit systems. Fixes: 129776ac2e38 ("accel/qaic: Add control path") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/24d3348b-25ac-4c1b-b171-9dae7c43e4e0@moroto.mountain
2023-08-15accel/qaic: Fix slicing memory leakPranjal Ramajor Asha Kanojiya
The temporary buffer storing slicing configuration data from user is only freed on error. This is a memory leak. Free the buffer unconditionally. Fixes: ff13be830333 ("accel/qaic: Add datapath") Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230802145937.14827-1-quic_jhugo@quicinc.com
2023-08-15mmc: f-sdh30: fix order of function calls in sdhci_f_sdh30_removeYangtao Li
The order of function calls in sdhci_f_sdh30_remove is wrong, let's call sdhci_pltfm_unregister first. Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 5def5c1c15bf ("mmc: sdhci-f-sdh30: Replace with sdhci_pltfm") Signed-off-by: Yangtao Li <frank.li@vivo.com> Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230727070051.17778-62-frank.li@vivo.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-08-15wifi: iwlwifi: mvm: add dependency for PTP clockRandy Dunlap
When the code to use the PTP HW clock was added, it didn't update the Kconfig entry for the PTP dependency, leading to build errors, so update the Kconfig entry to depend on PTP_1588_CLOCK_OPTIONAL. aarch64-linux-ld: drivers/net/wireless/intel/iwlwifi/mvm/ptp.o: in function `iwl_mvm_ptp_init': drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:294: undefined reference to `ptp_clock_register' drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:294:(.text+0xce8): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_register' aarch64-linux-ld: drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:301: undefined reference to `ptp_clock_index' drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:301:(.text+0xd18): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_index' aarch64-linux-ld: drivers/net/wireless/intel/iwlwifi/mvm/ptp.o: in function `iwl_mvm_ptp_remove': drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:315: undefined reference to `ptp_clock_index' drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:315:(.text+0xe80): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_index' aarch64-linux-ld: drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:319: undefined reference to `ptp_clock_unregister' drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:319:(.text+0xeac): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_unregister' Fixes: 1595ecce1cf3 ("wifi: iwlwifi: mvm: add support for PTP HW clock (PHC)") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/all/202308110447.4QSJHmFH-lkp@intel.com/ Cc: Krishnanand Prabhu <krishnanand.prabhu@intel.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Gregory Greenman <gregory.greenman@intel.com> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230812052947.22913-1-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-08-15Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio fixes from Michael Tsirkin: "Just a bunch of bugfixes all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (26 commits) virtio-mem: check if the config changed before fake offlining memory virtio-mem: keep retrying on offline_and_remove_memory() errors in Sub Block Mode (SBM) virtio-mem: convert most offline_and_remove_memory() errors to -EBUSY virtio-mem: remove unsafe unplug in Big Block Mode (BBM) pds_vdpa: fix up debugfs feature bit printing pds_vdpa: alloc irq vectors on DRIVER_OK pds_vdpa: clean and reset vqs entries pds_vdpa: always allow offering VIRTIO_NET_F_MAC pds_vdpa: reset to vdpa specified mac virtio-net: Zero max_tx_vq field for VIRTIO_NET_CTRL_MQ_HASH_CONFIG case vdpa/mlx5: Fix crash on shutdown for when no ndev exists vdpa/mlx5: Delete control vq iotlb in destroy_mr only when necessary vdpa/mlx5: Fix mr->initialized semantics vdpa/mlx5: Correct default number of queues when MQ is on virtio-vdpa: Fix cpumask memory leak in virtio_vdpa_find_vqs() vduse: Use proper spinlock for IRQ injection vdpa: Enable strict validation for netlinks ops vdpa: Add max vqp attr to vdpa_nl_policy for nlattr length check vdpa: Add queue index attr to vdpa_nl_policy for nlattr length check vdpa: Add features attr to vdpa_nl_policy for nlattr length check ...
2023-08-14net: veth: Page pool creation error handling for existing pools onlyLiang Chen
The failure handling procedure destroys page pools for all queues, including those that haven't had their page pool created yet. this patch introduces necessary adjustments to prevent potential risks and inconsistency with the error handling behavior. Fixes: 0ebab78cbcbf ("net: veth: add page_pool for page recycling") Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Signed-off-by: Liang Chen <liangchen.linux@gmail.com> Link: https://lore.kernel.org/r/20230812023016.10553-1-liangchen.linux@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-14Merge branch 'octeon_ep-fixes-for-error-and-remove-paths'Jakub Kicinski
Michal Schmidt says: ==================== octeon_ep: fixes for error and remove paths I have an Octeon card that's misconfigured in a way that exposes a couple of bugs in the octeon_ep driver's error paths. It can reproduce the issues that patches 1 & 4 are fixing. Patches 2 & 3 are a result of reviewing the nearby code. ==================== Link: https://lore.kernel.org/r/20230810150114.107765-1-mschmidt@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-14octeon_ep: cancel queued works in probe error pathMichal Schmidt
If it fails to get the devices's MAC address, octep_probe exits while leaving the delayed work intr_poll_task queued. When the work later runs, it's a use after free. Move the cancelation of intr_poll_task from octep_remove into octep_device_cleanup. This does not change anything in the octep_remove flow, but octep_device_cleanup is called also in the octep_probe error path, where the cancelation is needed. Note that the cancelation of ctrl_mbox_task has to follow intr_poll_task's, because the ctrl_mbox_task may be queued by intr_poll_task. Fixes: 24d4333233b3 ("octeon_ep: poll for control messages") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Link: https://lore.kernel.org/r/20230810150114.107765-5-mschmidt@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-14octeon_ep: cancel ctrl_mbox_task after intr_poll_taskMichal Schmidt
intr_poll_task may queue ctrl_mbox_task. The function octep_poll_non_ioq_interrupts_cn93_pf does this. When removing the driver and canceling these two works, cancel ctrl_mbox_task last to guarantee it does not run anymore. Fixes: 24d4333233b3 ("octeon_ep: poll for control messages") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Link: https://lore.kernel.org/r/20230810150114.107765-4-mschmidt@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-14octeon_ep: cancel tx_timeout_task later in remove sequenceMichal Schmidt
tx_timeout_task is canceled too early when removing the driver. Nothing prevents .ndo_tx_timeout from triggering and queuing the work again. Better cancel it after the netdev is unregistered. It's harmless for octep_tx_timeout_task to run in the window between the unregistration and cancelation, because it checks netif_running. Fixes: 862cd659a6fb ("octeon_ep: Add driver framework and device initialization") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Link: https://lore.kernel.org/r/20230810150114.107765-3-mschmidt@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-14octeon_ep: fix timeout value for waiting on mbox responseMichal Schmidt
The intention was to wait up to 500 ms for the mbox response. The third argument to wait_event_interruptible_timeout() is supposed to be the timeout duration. The driver mistakenly passed absolute time instead. Fixes: 577f0d1b1c5f ("octeon_ep: add separate mailbox command and response queues") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230810150114.107765-2-mschmidt@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-14net: macb: In ZynqMP resume always configure PS GTR for non-wakeup sourceRadhey Shyam Pandey
On Zynq UltraScale+ MPSoC ubuntu platform when systemctl issues suspend, network manager bring down the interface and goes into suspend. When it wakes up it again enables the interface. This leads to xilinx-psgtr "PLL lock timeout" on interface bringup, as the power management controller power down the entire FPD (including SERDES) if none of the FPD devices are in use and serdes is not initialized on resume. $ sudo rtcwake -m no -s 120 -v $ sudo systemctl suspend <this does ifconfig eth1 down> $ ifconfig eth1 up xilinx-psgtr fd400000.phy: lane 0 (type 10, protocol 5): PLL lock timeout phy phy-fd400000.phy.0: phy poweron failed --> -110 macb driver is called in this way: 1. macb_close: Stop network interface. In this function, it reset MACB IP and disables PHY and network interface. 2. macb_suspend: It is called in kernel suspend flow. But because network interface has been disabled(netif_running(ndev) is false), it does nothing and returns directly; 3. System goes into suspend state. Some time later, system is waken up by RTC wakeup device; 4. macb_resume: It does nothing because network interface has been disabled; 5. macb_open: It is called to enable network interface again. ethernet interface is initialized in this API but serdes which is power-off by PMUFW during FPD-off suspend is not initialized again and so we hit GT PLL lock issue on open. To resolve this PLL timeout issue always do PS GTR initialization when ethernet device is configured as non-wakeup source. Fixes: f22bd29ba19a ("net: macb: Fix ZynqMP SGMII non-wakeup source resume failure") Fixes: 8b73fa3ae02b ("net: macb: Added ZynqMP-specific initialization") Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://lore.kernel.org/r/1691414091-2260697-1-git-send-email-radhey.shyam.pandey@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-14sunrpc: set the bv_offset of first bvec in svc_tcp_sendmsgJeff Layton
svc_tcp_sendmsg used to factor in the xdr->page_base when sending pages, but commit 5df5dd03a8f7 ("sunrpc: Use sendmsg(MSG_SPLICE_PAGES) rather then sendpage") dropped that part of the handling. Fix it by setting the bv_offset of the first bvec. Fixes: 5df5dd03a8f7 ("sunrpc: Use sendmsg(MSG_SPLICE_PAGES) rather then sendpage") Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-08-14i2c: bcm-iproc: Fix bcm_iproc_i2c_isr deadlock issueChengfeng Ye
iproc_i2c_rd_reg() and iproc_i2c_wr_reg() are called from both interrupt context (e.g. bcm_iproc_i2c_isr) and process context (e.g. bcm_iproc_i2c_suspend). Therefore, interrupts should be disabled to avoid potential deadlock. To prevent this scenario, use spin_lock_irqsave(). Fixes: 9a1038728037 ("i2c: iproc: add NIC I2C support") Signed-off-by: Chengfeng Ye <dg573847474@gmail.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-08-14i2c: Update documentation to use .probe() againUwe Kleine-König
Since commit 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") .probe() is the recommended callback to implement (again). Reflect this in the documentation and don't mention .probe_new() any more. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-08-14drm/i915: fix display probe for IVB Q and IVB D GT2 serverJani Nikula
The current display probe is unable to differentiate between IVB Q and IVB D GT2 server, as they both have the same device id, but different subvendor and subdevice. This leads to the latter being misidentified as the former, and should just end up not having a display. However, the no display case returns a NULL as the display device info, and promptly oopses. As the IVB Q case is rare, and we're anyway moving towards GMD ID, handle the identification requiring subvendor and subdevice as a special case first, instead of unnecessarily growing the intel_display_ids[] array with subvendor and subdevice. [ 5.425298] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 5.426059] #PF: supervisor read access in kernel mode [ 5.426810] #PF: error_code(0x0000) - not-present page [ 5.427570] PGD 0 P4D 0 [ 5.428285] Oops: 0000 [#1] PREEMPT SMP PTI [ 5.429035] CPU: 0 PID: 137 Comm: (udev-worker) Not tainted 6.4.0-1-amd64 #1 Debian 6.4.4-1 [ 5.429759] Hardware name: HP HP Z220 SFF Workstation/HP Z220 SFF Workstation, BIOS 4.19-218-gb184e6e0a1 02/02/2023 [ 5.430485] RIP: 0010:intel_device_info_driver_create+0xf1/0x120 [i915] [ 5.431338] Code: 48 8b 97 80 1b 00 00 89 8f c0 1b 00 00 48 89 b7 b0 1b 00 00 48 89 97 b8 1b 00 00 0f b7 fd e8 76 e8 14 00 48 89 83 50 1b 00 00 <48> 8b 08 48 89 8b c4 1b 00 00 48 8b 48 08 48 89 8b cc 1b 00 00 8b [ 5.432920] RSP: 0018:ffffb8254044fb98 EFLAGS: 00010206 [ 5.433707] RAX: 0000000000000000 RBX: ffff923076e80000 RCX: 0000000000000000 [ 5.434494] RDX: 0000000000000260 RSI: 0000000100001000 RDI: 000000000000016a [ 5.435277] RBP: 000000000000016a R08: ffffb8254044fb00 R09: 0000000000000000 [ 5.436055] R10: ffff922d02761de8 R11: 00657361656c6572 R12: ffffffffc0e5d140 [ 5.436867] R13: ffff922d00b720d0 R14: 0000000076e80000 R15: ffff923078c0cae8 [ 5.437646] FS: 00007febd19a18c0(0000) GS:ffff92307c000000(0000) knlGS:0000000000000000 [ 5.438434] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.439218] CR2: 0000000000000000 CR3: 000000010256e002 CR4: 00000000001706f0 [ 5.440009] Call Trace: [ 5.440824] <TASK> [ 5.441611] ? __die+0x23/0x70 [ 5.442394] ? page_fault_oops+0x17d/0x4c0 [ 5.443173] ? exc_page_fault+0x7f/0x180 [ 5.443949] ? asm_exc_page_fault+0x26/0x30 [ 5.444756] ? intel_device_info_driver_create+0xf1/0x120 [i915] [ 5.445652] ? intel_device_info_driver_create+0xea/0x120 [i915] [ 5.446545] i915_driver_probe+0x7f/0xb60 [i915] [ 5.447431] ? drm_privacy_screen_get+0x15c/0x1a0 [drm] [ 5.448240] local_pci_probe+0x45/0xa0 [ 5.449013] pci_device_probe+0xc7/0x240 [ 5.449748] really_probe+0x19e/0x3e0 [ 5.450464] ? __pfx___driver_attach+0x10/0x10 [ 5.451172] __driver_probe_device+0x78/0x160 [ 5.451870] driver_probe_device+0x1f/0x90 [ 5.452601] __driver_attach+0xd2/0x1c0 [ 5.453293] bus_for_each_dev+0x88/0xd0 [ 5.453989] bus_add_driver+0x116/0x220 [ 5.454672] driver_register+0x59/0x100 [ 5.455336] i915_init+0x25/0xc0 [i915] [ 5.456104] ? __pfx_i915_init+0x10/0x10 [i915] [ 5.456882] do_one_initcall+0x5d/0x240 [ 5.457511] do_init_module+0x60/0x250 [ 5.458126] __do_sys_finit_module+0xac/0x120 [ 5.458721] do_syscall_64+0x60/0xc0 [ 5.459314] ? syscall_exit_to_user_mode+0x1b/0x40 [ 5.459897] ? do_syscall_64+0x6c/0xc0 [ 5.460510] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 5.461082] RIP: 0033:0x7febd20b0eb9 [ 5.461648] Code: 08 89 e8 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 2f 1f 0d 00 f7 d8 64 89 01 48 [ 5.462905] RSP: 002b:00007fffabb1ba78 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 5.463554] RAX: ffffffffffffffda RBX: 0000561e6304f410 RCX: 00007febd20b0eb9 [ 5.464201] RDX: 0000000000000000 RSI: 00007febd2244f0d RDI: 0000000000000015 [ 5.464869] RBP: 00007febd2244f0d R08: 0000000000000000 R09: 000000000000000a [ 5.465512] R10: 0000000000000015 R11: 0000000000000246 R12: 0000000000020000 [ 5.466124] R13: 0000000000000000 R14: 0000561e63032b60 R15: 000000000000000a [ 5.466700] </TASK> [ 5.467271] Modules linked in: i915(+) drm_buddy video crc32_pclmul sr_mod hid_generic wmi crc32c_intel i2c_algo_bit sd_mod cdrom drm_display_helper cec usbhid rc_core ghash_clmulni_intel hid sha512_ssse3 ttm sha512_generic xhci_pci ehci_pci xhci_hcd ehci_hcd nvme ahci drm_kms_helper nvme_core libahci t10_pi libata psmouse aesni_intel scsi_mod crypto_simd i2c_i801 scsi_common crc64_rocksoft_generic cryptd i2c_smbus drm lpc_ich crc64_rocksoft crc_t10dif e1000e usbcore crct10dif_generic usb_common crct10dif_pclmul crc64 crct10dif_common button [ 5.469750] CR2: 0000000000000000 [ 5.470364] ---[ end trace 0000000000000000 ]--- [ 5.470971] RIP: 0010:intel_device_info_driver_create+0xf1/0x120 [i915] [ 5.471699] Code: 48 8b 97 80 1b 00 00 89 8f c0 1b 00 00 48 89 b7 b0 1b 00 00 48 89 97 b8 1b 00 00 0f b7 fd e8 76 e8 14 00 48 89 83 50 1b 00 00 <48> 8b 08 48 89 8b c4 1b 00 00 48 8b 48 08 48 89 8b cc 1b 00 00 8b [ 5.473034] RSP: 0018:ffffb8254044fb98 EFLAGS: 00010206 [ 5.473698] RAX: 0000000000000000 RBX: ffff923076e80000 RCX: 0000000000000000 [ 5.474371] RDX: 0000000000000260 RSI: 0000000100001000 RDI: 000000000000016a [ 5.475045] RBP: 000000000000016a R08: ffffb8254044fb00 R09: 0000000000000000 [ 5.475725] R10: ffff922d02761de8 R11: 00657361656c6572 R12: ffffffffc0e5d140 [ 5.476405] R13: ffff922d00b720d0 R14: 0000000076e80000 R15: ffff923078c0cae8 [ 5.477124] FS: 00007febd19a18c0(0000) GS:ffff92307c000000(0000) knlGS:0000000000000000 [ 5.477811] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.478499] CR2: 0000000000000000 CR3: 000000010256e002 CR4: 00000000001706f0 Fixes: 69d439818fe5 ("drm/i915/display: Make display responsible for probing its own IP") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8991 Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Luca Coelho <luciano.coelho@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230804084600.1005818-1-jani.nikula@intel.com (cherry picked from commit 1435188307d128671f677eb908e165666dd83652) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2023-08-14drm/i915/sdvo: fix panel_type initializationJani Nikula
Commit 3f9ffce5765d ("drm/i915: Do panel VBT init early if the VBT declares an explicit panel type") started using -1 as the value for unset panel_type. It gets initialized in intel_panel_init_alloc(), but the SDVO code never calls it. Call intel_panel_init_alloc() to initialize the panel, including the panel_type. Reported-by: Tomi Leppänen <tomi@tomin.site> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8896 Fixes: 3f9ffce5765d ("drm/i915: Do panel VBT init early if the VBT declares an explicit panel type") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v6.1+ Reviewed-by: Uma Shankar <uma.shankar@intel.com> Tested-by: Tomi Leppänen <tomi@tomin.site> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230803122706.838721-1-jani.nikula@intel.com (cherry picked from commit 26e60294e8eacedc8ebb33405b2c375fd80e0900) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2023-08-14drm/i915/guc/slpc: Restore efficient freq earlierVinay Belgaumkar
This should be done before the soft min/max frequencies are restored. When we disable the "Ignore efficient frequency" flag, GuC does not actually bring the requested freq down to RPn. Specifically, this scenario- - ignore efficient freq set to true - reduce min to RPn (from efficient) - suspend - resume (includes GuC load, restore soft min/max, restore efficient freq) - validate min freq has been resored to RPn This will fail if we didn't first restore(disable, in this case) efficient freq flag before setting the soft min frequency. v2: Bring the min freq down to RPn when we disable efficient freq (Rodrigo) Also made the change to set the min softlimit to RPn at init. Otherwise, we were storing RPe there. Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8736 Fixes: 55f9720dbf23 ("drm/i915/guc/slpc: Provide sysfs for efficient freq") Fixes: 95ccf312a1e4 ("drm/i915/guc/slpc: Allow SLPC to use efficient frequency") Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230726010044.3280402-1-vinay.belgaumkar@intel.com (cherry picked from commit 28e671114fb0f28f334fac8d0a6b9c395c7b0498) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2023-08-14i2c: sun6i-p2wi: Fix an error message in probe()Dan Carpenter
The "ret" variable is uninitialized. It was the "p2wi->rstc" variable that was intended. We can also use the %pe string format to print the error code name instead of just the number. Fixes: 75ff8a340a81 ("i2c: sun6i-p2wi: Use devm_clk_get_enabled()") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-08-14btrfs: fix infinite directory readsFilipe Manana
The readdir implementation currently processes always up to the last index it finds. This however can result in an infinite loop if the directory has a large number of entries such that they won't all fit in the given buffer passed to the readdir callback, that is, dir_emit() returns a non-zero value. Because in that case readdir() will be called again and if in the meanwhile new directory entries were added and we still can't put all the remaining entries in the buffer, we keep repeating this over and over. The following C program and test script reproduce the problem: $ cat /mnt/readdir_prog.c #include <sys/types.h> #include <dirent.h> #include <stdio.h> int main(int argc, char *argv[]) { DIR *dir = opendir("."); struct dirent *dd; while ((dd = readdir(dir))) { printf("%s\n", dd->d_name); rename(dd->d_name, "TEMPFILE"); rename("TEMPFILE", dd->d_name); } closedir(dir); } $ gcc -o /mnt/readdir_prog /mnt/readdir_prog.c $ cat test.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi mkfs.btrfs -f $DEV &> /dev/null #mkfs.xfs -f $DEV &> /dev/null #mkfs.ext4 -F $DEV &> /dev/null mount $DEV $MNT mkdir $MNT/testdir for ((i = 1; i <= 2000; i++)); do echo -n > $MNT/testdir/file_$i done cd $MNT/testdir /mnt/readdir_prog cd /mnt umount $MNT This behaviour is surprising to applications and it's unlike ext4, xfs, tmpfs, vfat and other filesystems, which always finish. In this case where new entries were added due to renames, some file names may be reported more than once, but this varies according to each filesystem - for example ext4 never reported the same file more than once while xfs reports the first 13 file names twice. So change our readdir implementation to track the last index number when opendir() is called and then make readdir() never process beyond that index number. This gives the same behaviour as ext4. Reported-by: Rob Landley <rob@landley.net> Link: https://lore.kernel.org/linux-btrfs/2c8c55ec-04c6-e0dc-9c5c-8c7924778c35@landley.net/ Link: https://bugzilla.kernel.org/show_bug.cgi?id=217681 CC: stable@vger.kernel.org # 6.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-08-14smb3: display network namespace in debug informationSteve French
We recently had problems where a network namespace was deleted causing hard to debug reconnect problems. To help deal with configuration issues like this it is useful to dump the network namespace to better debug what happened. So add this to information displayed in /proc/fs/cifs/DebugData for the server (and channels if mounted with multichannel). For example: Local Users To Server: 1 SecMode: 0x1 Req On Wire: 0 Net namespace: 4026531840 This can be easily compared with what is displayed for the processes on the system. For example /proc/1/ns/net in this case showed the same thing (see below), and we can see that the namespace is still valid in this example. 'net:[4026531840]' Cc: stable@vger.kernel.org Acked-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-08-14i2c: hisi: Only handle the interrupt of the driver's transferYicong Yang
The controller may be shared with other port, for example the firmware. Handle the interrupt from other sources will cause crash since some data are not initialized. So only handle the interrupt of the driver's transfer and discard others. Fixes: d62fbdb99a85 ("i2c: add support for HiSilicon I2C controller") Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20230801124625.63587-1-yangyicong@huawei.com Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-08-14cifs: Release folio lock on fscache read hit.Russell Harmon via samba-technical
Under the current code, when cifs_readpage_worker is called, the call contract is that the callee should unlock the page. This is documented in the read_folio section of Documentation/filesystems/vfs.rst as: > The filesystem should unlock the folio once the read has completed, > whether it was successful or not. Without this change, when fscache is in use and cache hit occurs during a read, the page lock is leaked, producing the following stack on subsequent reads (via mmap) to the page: $ cat /proc/3890/task/12864/stack [<0>] folio_wait_bit_common+0x124/0x350 [<0>] filemap_read_folio+0xad/0xf0 [<0>] filemap_fault+0x8b1/0xab0 [<0>] __do_fault+0x39/0x150 [<0>] do_fault+0x25c/0x3e0 [<0>] __handle_mm_fault+0x6ca/0xc70 [<0>] handle_mm_fault+0xe9/0x350 [<0>] do_user_addr_fault+0x225/0x6c0 [<0>] exc_page_fault+0x84/0x1b0 [<0>] asm_exc_page_fault+0x27/0x30 This requires a reboot to resolve; it is a deadlock. Note however that the call to cifs_readpage_from_fscache does mark the page clean, but does not free the folio lock. This happens in __cifs_readpage_from_fscache on success. Releasing the lock at that point however is not appropriate as cifs_readahead also calls cifs_readpage_from_fscache and *does* unconditionally release the lock after its return. This change therefore effectively makes cifs_readpage_worker work like cifs_readahead. Signed-off-by: Russell Harmon <russ@har.mn> Acked-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Reviewed-by: David Howells <dhowells@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
generated by cgit (git 2.34.1) at 2025-07-19 00:26:48 +0000