summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-09-21iwlwifi: mvm: disable BT Co-running by defaultEmmanuel Grumbach
The tables still contain dummy values. Cc: <stable@vger.kernel.org> [3.15+] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-21iwlwifi: mvm: rs: fix logic in case of multiple TIDsEyal Shapira
In case of traffic on multiple TIDs where one is aggregated and the other is not RS would toggle between considering traffic vs. the station as aggregated and not aggregated. Instead consider the sta state as aggregated as long as there's at least one TID aggregated. This limitation is because the rates table is kept per station and not per TID. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-21iwlwifi: mvm: report all BA notifs to RSEyal Shapira
Currently BA notifications which don't reclaim any frames would not cause the RS to be called as no skbs are passed to mac80211. This is not optimal as RS can benefit from the statistics of sent vs. acked of such a BA. This can improve the reaction time of the RS algorithm. Also, an upcoming change in the firmware would cause BA timeout to be reported as a BA notif with 0 acked so this change is required for that as well. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-21iwlwifi: 8000: fix fw name to account for revisionLiad Kaufman
The 8000 HW series also includes the revision in the FW name. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-21iwlwifi: pcie: fix HW_REV saving for 8000 seriesLiad Kaufman
Align the trans->hw_rev variable format with previous series format. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-21iwlwifi: Add missing PCI IDs for the 7260 seriesOren Givon
Add 4 missing PCI IDs for the 7260 series. Cc: <stable@vger.kernel.org> [3.10+] Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-21iwlwifi: mvm: limit aggregation size in low latency to 6Eyal Shapira
This is a tradeoff between enabling better throughput for bursty traffic and low latency. The number 6 was found to be a good tradeoff for the Miracast use case which is the major use case for low latency. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-21iwlwifi: mvm: rs: refactor to allow direct rs updatingEyal Shapira
Enable RS to get updated directly via iwl_mvm_rs_tx_status which will be called by the driver and not via mac80211 rate control. This is required for a following patch to report on BAs which do not cause the BA window to progress. Also this is a first step in decoupling rs from the mac80211 rate control. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-21iwlwifi: mvm: choose an initial tx rate based on rssi conditionsEyal Shapira
Improve the initial tx rate and antenna selection to be based on the rssi of the last rx. This avoids starting at the lowest legacy rate always and requiring more tx traffic to "climb" up the rates. Since this option might cause trouble in certain setups, allow to disable it by default. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-18Bluetooth: Fix setting correct security level when initiating SMPJohan Hedberg
We can only determine the final security level when both pairing request and response have been exchanged. When initiating pairing the starting target security level is set to MEDIUM unless explicitly specified to be HIGH, so that we can still perform pairing even if the remote doesn't have MITM capabilities. However, once we've received the pairing response we should re-consult the remote and local IO capabilities and upgrade the target security level if necessary. Without this patch the resulting Long Term Key will occasionally be reported to be unauthenticated when it in reality is an authenticated one. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2014-09-18ath10k: use ether_addr_copy()Kalle Valo
As suggeested by checkpatch: WARNING: Prefer ether_addr_copy() over memcpy() if the Ethernet addresses are __aligned(2) In wmi.c I had to change due to sparse warnings copying of struct wmi_mac_addr from form &cmd->peer_macaddr.addr to cmd->peer_macaddr.addr. In ath10k_wmi_set_ap_ps_param() I also added the missing ".addr" to the copy command. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-09-18ath10k: reformat help text in ath10k_read_simulate_fw_crash()Kalle Valo
Makes it more readable and fixes checkpatch warnings: drivers/net/wireless/ath/ath10k/debug.c:593: WARNING: quoted string split across lines drivers/net/wireless/ath/ath10k/debug.c:594: WARNING: quoted string split across lines drivers/net/wireless/ath/ath10k/debug.c:595: WARNING: quoted string split across lines drivers/net/wireless/ath/ath10k/debug.c:596: WARNING: quoted string split across lines drivers/net/wireless/ath/ath10k/debug.c:597: WARNING: quoted string split across lines drivers/net/wireless/ath/ath10k/debug.c:599: WARNING: quoted string split across lines drivers/net/wireless/ath/ath10k/debug.c:600: WARNING: quoted string split across lines Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-09-18ath10k: miscellaneous checkpatch fixesKalle Valo
Fixes checkpatch warnings: ath10k/htc.c:49: WARNING: Possible unnecessary 'out of memory' message ath10k/htc.c:810: WARNING: Possible unnecessary 'out of memory' message ath10k/htt.h:1034: CHECK: Please use a blank line after function/struct/union/enum declarations ath10k/htt_rx.c:135: CHECK: Unnecessary parentheses around htt->rx_ring.alloc_idx.vaddr ath10k/htt_rx.c:173: CHECK: Unnecessary parentheses around htt->rx_ring.alloc_idx.vaddr ath10k/pci.c:633: WARNING: macros should not use a trailing semicolon ath10k/wmi.c:3594: WARNING: quoted string split across lines Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-09-18ath10k: else is not generally useful after a break or returnKalle Valo
Fixes checkpatch warnings: WARNING: else is not generally useful after a break or return Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-09-18ath10k: don't use return on void functionsKalle Valo
Fixes a checkpatch warning: WARNING: void function return statements are not generally useful Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-09-18ath10k: fix space after a cast style errorsKalle Valo
Fixes checkpatch warnings: CHECK: No space is necessary after a cast Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-09-18ath10k: fix missing a blank line after declarationsKalle Valo
Fixes checkpatch warnings: WARNING: Missing a blank line after declarations Please note that some of the cases I fixed by moving the variable declarations to the beginning of the function, which is the preferred style in ath10k. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-09-18ath10k: fix use of multiple blank linesKalle Valo
Fixes checkpatch warnings: CHECK: Please don't use multiple blank lines Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-09-18ath10k: fix checkpatch warnings about parenthesis alignmentKalle Valo
CHECK: Alignment should match open parenthesis Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-09-18ath10k: fix parenthesis alignment warning in ath10k_htt_rx_alloc()Kalle Valo
Fixes checkpatch warning: ath10k/htt_rx.c:519: CHECK: Alignment should match open parenthesis Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-09-17Bluetooth: Remove exported hci_recv_fragment functionMarcel Holtmann
The hci_recv_fragment function is no longer used by any driver and thus do not export it. In fact it is not even needed by the core and it can be removed altogether. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-09-16ath9k: enable ext channel pulse detectionLorenzo Bianconi
Enable pulse detection on extension channel if 40MHz channel width has been set Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-16ath9k: Fix build errorSujith Manoharan
This happens when CONFIG_ATH9K_CHANNEL_CONTEXT is not enabled. ../drivers/net/wireless/ath/ath9k/recv.c: In function ‘ath_rx_ps_beacon’: ../drivers/net/wireless/ath/ath9k/recv.c:553:27: error: ‘struct ath_softc’ has no member named ‘offchannel’ if (sc->cur_chan == &sc->offchannel.chan) ^ ../scripts/Makefile.build:257: recipe for target 'drivers/net/wireless/ath/ath9k/recv.o' failed make[10]: *** [drivers/net/wireless/ath/ath9k/recv.o] Error 1 ../scripts/Makefile.build:404: recipe for target 'drivers/net/wireless/ath/ath9k' failed make[9]: *** [drivers/net/wireless/ath/ath9k] Error 2 Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-16ath9k: initialize ath_node linked listLorenzo Bianconi
Initialize neighbor linked list used by dynack to compute ACK timeout as the maximum STA ACK timeout Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-16ath9k: enable dynack using set_coverage_class codepathLorenzo Bianconi
Enable ACK timeout estimation algorithm if set_coverage_class routine has been called with negative coverage_class parameter. Dynack is automatically disabled setting valid value for coverage class Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-16ath9k: add debugfs support for dynackLorenzo Bianconi
Add ack_to entry to debugfs in order to dump current ACK timeout value Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-16ath9k: enable control frame receptionLorenzo Bianconi
Set control frame bit in rx filter if dynack processing has been activated in order to enable ACK frame reception Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-16ath9k: add sampling methods for (tx|rx) timestampLorenzo Bianconi
Add sampling methods for ACK RX timestamp in ath_rx_tasklet() and for TX frame timestamp in ath_tx_complete_aggr() and in ath_tx_process_buffer(). These samples will be used in dynack processing for ACK timeout estimation Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-16ath9k: do not overwrite ACK timeout estimationLorenzo Bianconi
Do not overwrite ACK timeout estimation in ath9k_hw_init_global_settings() if dynack processing has been enabled Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-16ath9k: add config for (en|dis)abling ACK timeout estimationLorenzo Bianconi
Add ACK timeout estimation algorithm to ath9k Makefile and Kconfig Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-16ath9k: add dynamic ACK timeout estimationLorenzo Bianconi
Add dynamic ACK timeout estimation algorithm based on ACK frame RX timestamp, TX frame timestamp and frame duration. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Tested-by: Philippe Duchein <wireless-dev@duchein.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-16ath9k: add duration field to ath_tx_statusLorenzo Bianconi
Add duration field to ath_tx_status in order to report frame duration for each entry in multi-retry chain. These fields will be used in ACK timeout estimation algorithm (dynack) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-16ath9k: export methods related to ACK timeout estimationLorenzo Bianconi
Remove static keyword and export ath9k_hw_setslottime(), ath9k_hw_set_ack_timeout() and ath9k_hw_set_cts_timeout() in hw.h. These methods will be used in ACK timeout estimation algorithm (dynack) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-16Bluetooth: btusb: Implement driver internal packet reassemblyMarcel Holtmann
When receiving USB interrupt, bulk or isochronous packet, they normally come in fragments. So far the driver just handed each fragment off to the hci_recv_fragment function of the Bluetooth core. That function is however so specific that is does not belong in the core. This patch implements the same reassembly logic in the driver. In addition this fixes a long standing bug where multiple complete packets are received within a single USB packet. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-09-16iwlwifi: mvm: Allow schedule scan while connectedAlexander Bondar
In the past when schedule scan was started while connected on one of interfaces FW crashes were observed. In the newest FW this issue is solved, so remove limitaion after examining corresponding TLV flag. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-16iwlwifi: mvm: add debugfs entry to read the current temperatureLuciano Coelho
When read, this new debugfs entry requests the current temperature from the firmware and outputs it. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-16iwlwifi: mvm: prepare for scheduler config commandAvri Altman
The scheduler is a HW sub-block that directs the work of the Flow Handler by issuing requests for frame transfers, specifying source and destination. Its primary function is to allocate flows into the TX FIFOs based upon a pre-determined mapping. The driver has some responsibilities to the scheduler, namely initialising and maintaining the hardware registers. This is currently done by directly accessing them, which can cause races with the firmware also accessing the registers. To address this problem, change the driver to no longer directly access the registers but go through the firmware for this if the firmware has support for DQA and thus the new command. Signed-off-by: Avri Altman <avri.altman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-16iwlwifi: mvm: Set RRM_ENABLED bit in scan commandsAndrei Otcheretianski
Set RRM_ENABLED (bit 6) flag in scan commands. When this flag is set the fw will add WFA vendor-specific TPC report and DS parameter set IEs into probe requests. This bit is set for SCAN_OFFLOAD_REQUEST_CMD(0x51). Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: Assaf Krauss <assaf.krauss@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-16iwlwifi: mvm: Announce Quiet Period supportAssaf Krauss
Add a ucode capability flag for support of Quiet Period (part of RRM). If this flag is set, advertise device support. Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-16iwlwifi: mvm: Update TX power in TPC reportsAndrei Otcheretianski
Introduce new tx command flag (TX_CMD_FLG_WRITE_TX_POWER) which requests the fw to update the tx power value at some constant offset. Set this flag when transmitting either TPC report or Link measurement report action frames. In addition, introduce new tlv which indicates whether the fw supports power insertion (IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT) and publish the corresponding nl80211 feature. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-16iwlwifi: mvm: support cloned tx skbsIdo Yariv
Since tx skbs are not modified by the driver, let mac80211 know the driver can handle cloned skbs. Signed-off-by: Ido Yariv <idox.yariv@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-16Bluetooth: btusb: Split fragement receiption into separate functionsMarcel Holtmann
The actual packet reassembly should be done inside the driver. To allow this to happen cleanly in future patches, split the fragment reception into its own functions. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-09-16Bluetooth: btusb: Fix old coding style issuesMarcel Holtmann
The btusb driver has been around for a while now and it is time to bring its coding style in sync with what has been done for the Bluetooth subsystem and other drivers. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-09-15ath9k: Fix primary station configurationSujith Manoharan
Assign 'primary_sta' to the active primary station interface after iterating over the list of interfaces. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15ath9k: Remove useless opmode checkSujith Manoharan
The opmode is verified to be NL80211_IFTYPE_STATION before calling ath9k_set_assoc_state(). Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15ath9k: Set offchannel state properlySujith Manoharan
When switching offchannel, BSS related information in the HW has to be reset to default values. Add a routine to do this. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15ath9k: Check beaconing mode properlySujith Manoharan
In MCC mode, the TSF of a context needs to be adjusted only if it is GO/AP. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15ath9k: Remove unnecessary tbtt assignmentSujith Manoharan
The next_tbtt variable in the scheduler is needed only for GO/AP mode operation and is always read from the NEXT_TBTT_TIMER in the HW. There is no need to store the timestamp for received beacons. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15b43: add support for setting the beacon listen intervalHauke Mehrtens
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15b43: update some transmit header constantsHauke Mehrtens
Some constants were missing and are added now. The rate mode was renamed, at least the ucode in brcsmac uses 2 for HT rates (iee80211n) and the more recent ucodes are using 3 for VHT (ieee80211ac). Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-07-15 20:40:15 +0000