| Age | Commit message (Collapse) | Author |
|---|
|
Cisco AP module 9115 with FW 17.3 has a bug and sends a too
large maximum MPDU length in the association response
(indicating 12k) that it cannot actually process.
Work around that by taking the minimum between what's in the
association response and the BSS elements (from beacon or
probe response).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230918140607.d1966a9a532e.I090225babb7cd4d1081ee9acd40e7de7e41c15ae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When the scan request includes a non broadcast BSSID, when adding the
scan parameters for 6GHz collocated scanning, do not include entries
that do not match the given BSSID.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230918140607.6d31d2a96baf.I6c4e3e3075d1d1878ee41f45190fdc6b86f18708@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When returning from ieee80211_key_link(), the key needs to
have been freed or successfully installed. This was missed
in a number of error paths, fix it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When ieee80211_key_link() is called by ieee80211_gtk_rekey_add()
but returns 0 due to KRACK protection (identical key reinstall),
ieee80211_gtk_rekey_add() will still return a pointer into the
key, in a potential use-after-free. This normally doesn't happen
since it's only called by iwlwifi in case of WoWLAN rekey offload
which has its own KRACK protection, but still better to fix, do
that by returning an error code and converting that to success on
the cfg80211 boundary only, leaving the error for bad callers of
ieee80211_gtk_rekey_add().
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: fdf7cb4185b6 ("mac80211: accept key reinstall without changing anything")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
On MT76x0, LNA gain should be applied for both external and internal LNA.
On MT76x2, LNA gain should be treated as 0 for external LNA.
Move the LNA type based logic to mt76x2 in order to fix mt76x0.
Fixes: 2daa67588f34 ("mt76x0: unify lna_gain parsing")
Reported-by: Shiji Yang <yangshiji66@outlook.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230919194747.31647-1-nbd@nbd.name
|
|
Since commit 2d47c6956ab3 ("ubsan: Tighten UBSAN_BOUNDS on GCC"),
UBSAN_BOUNDS no longer pretends 1-element arrays are unbounded. Walking
'element' and 'channel_list' will trigger warnings, so make them proper
flexible arrays.
False positive warnings were:
UBSAN: array-index-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:6984:20
index 1 is out of range for type '__le32 [1]'
UBSAN: array-index-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:1126:27
index 1 is out of range for type '__le16 [1]'
for these lines of code:
6884 ch.chspec = (u16)le32_to_cpu(list->element[i]);
1126 params_le->channel_list[i] = cpu_to_le16(chanspec);
Cc: stable@vger.kernel.org # 6.5+
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230914070227.12028-1-juerg.haefliger@canonical.com
|
|
Only skip the code path trying to access the rfc1042 headers when the
buffer is too small, so the driver can still process packets without
rfc1042 headers.
Fixes: 119585281617 ("wifi: mwifiex: Fix OOB and integer underflow when rx packets")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Acked-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Matthew Wang <matthewmwang@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230908104308.1546501-1-treapking@chromium.org
|
|
The MAC address is stored at offset 0x107 in the EEPROM, like correctly
stated in the comment. Add a two bytes reserved field right before the
MAC address to shift it from offset 0x105 to 0x107.
With this the MAC address returned from my RTL8723du wifi stick can be
correctly decoded as "Shenzhen Four Seas Global Link Network Technology
Co., Ltd."
Fixes: 87caeef032fc ("wifi: rtw88: Add rtw8723du chipset support")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Yanik Fuchs <Yanik.fuchs@mbv.ch>
Cc: stable@vger.kernel.org
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230907071614.2032404-1-s.hauer@pengutronix.de
|
|
If userspace quickly opens /dev/rfkill after a new
instance was created, it might see the old state of
the instance from before the sync work runs and may
even _change_ the state, only to have the sync work
change it again.
Fix this by doing the sync inline where needed, not
just for /dev/rfkill but also for sysfs.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since the changed field size was increased to u64, mesh_bss_info_changed
pulls invalid bits from the first 3 bytes of the mesh id, clears them, and
passes them on to ieee80211_link_info_change_notify, because
ifmsh->mbss_changed was not updated to match its size.
Fix this by turning into ifmsh->mbss_changed into an unsigned long array with
64 bit size.
Fixes: 15ddba5f4311 ("wifi: mac80211: consistently use u64 for BSS changes")
Reported-by: Thomas Hühn <thomas.huehn@hs-nordhausen.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230913050134.53536-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
As reported by Stephen, I neglected to add the kernel-doc
for the new struct member. Fix that.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 37c20b2effe9 ("wifi: cfg80211: fix cqm_config access race")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Max Schulze reports crashes with brcmfmac. The reason seems
to be a race between userspace removing the CQM config and
the driver calling cfg80211_cqm_rssi_notify(), where if the
data is freed while cfg80211_cqm_rssi_notify() runs it will
crash since it assumes wdev->cqm_config is set. This can't
be fixed with a simple non-NULL check since there's nothing
we can do for locking easily, so use RCU instead to protect
the pointer, but that requires pulling the updates out into
an asynchronous worker so they can sleep and call back into
the driver.
Since we need to change the free anyway, also change it to
go back to the old settings if changing the settings fails.
Reported-and-tested-by: Max Schulze <max.schulze@online.de>
Closes: https://lore.kernel.org/r/ac96309a-8d8d-4435-36e6-6d152eb31876@online.de
Fixes: 4a4b8169501b ("cfg80211: Accept multiple RSSI thresholds for CQM")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
A few lines above, space is kzalloc()'ed for:
sizeof(struct iwl_nvm_data) +
sizeof(struct ieee80211_channel) +
sizeof(struct ieee80211_rate)
'mvm->nvm_data' is a 'struct iwl_nvm_data', so it is fine.
At the end of this structure, there is the 'channels' flex array.
Each element is of type 'struct ieee80211_channel'.
So only 1 element is allocated in this array.
When doing:
mvm->nvm_data->bands[0].channels = mvm->nvm_data->channels;
We point at the first element of the 'channels' flex array.
So this is fine.
However, when doing:
mvm->nvm_data->bands[0].bitrates =
(void *)((u8 *)mvm->nvm_data->channels + 1);
because of the "(u8 *)" cast, we add only 1 to the address of the beginning
of the flex array.
It is likely that we want point at the 'struct ieee80211_rate' allocated
just after.
Remove the spurious casting so that the pointer arithmetic works as
expected.
Fixes: 8ca151b568b6 ("iwlwifi: add the MVM driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/23f0ec986ef1529055f4f93dcb3940a6cf8d9a94.1690143750.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Debugging indicates that nothing else is clearing the info->flags,
so some frames were flagged as ACKed when they should not be.
Explicitly clear the ack flag to ensure this does not happen.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Acked-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230808205605.4105670-1-greearb@candelatech.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The iwl_fw_ini_error_dump_range structure has conflicting alignment
requirements for the inner union and the outer struct:
In file included from drivers/net/wireless/intel/iwlwifi/fw/dbg.c:9:
drivers/net/wireless/intel/iwlwifi/fw/error-dump.h:312:2: error: field within 'struct iwl_fw_ini_error_dump_range' is less aligned than 'union iwl_fw_ini_error_dump_range::(anonymous at drivers/net/wireless/intel/iwlwifi/fw/error-dump.h:312:2)' and is usually due to 'struct iwl_fw_ini_error_dump_range' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]
union {
As the original intention was apparently to make the entire structure
unaligned, mark the innermost members the same way so the union
becomes packed as well.
Fixes: 973193554cae6 ("iwlwifi: dbg_ini: dump headers cleanup")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616090343.2454061-1-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Handling of BSS_CHANGED_PS was missing in vif_cfg_changed
callback. Fix it.
Fixes: 22c588343529 ("wifi: iwlwifi: mvm: replace bss_info_changed() with vif_cfg/link_info_changed()")
Reported-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230905162939.5ef0c8230de6.Ieed265014988c50ec68fbff6d33821e4215f987f@changeid
[note: patch looks bigger than it is due to reindentation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Many regulatories can have HE/EHT Operation as not permitted. In such
cases, AP should not be allowed to start if it is using a channel
having the no operation flag set. However, currently there is no such
check in place.
Fix this issue by validating such IEs sent during start AP against the
channel flags.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230905064857.1503-1-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When connect to MLO AP with more than one link, and the assoc response of
AP is not success, then cfg80211_unhold_bss() is not called for all the
links' cfg80211_bss except the primary link which means the link used by
the latest successful association request. Thus the hold value of the
cfg80211_bss is not reset to 0 after the assoc fail, and then the
__cfg80211_unlink_bss() will not be called for the cfg80211_bss by
__cfg80211_bss_expire().
Then the AP always looks exist even the AP is shutdown or reconfigured
to another type, then it will lead error while connecting it again.
The detail info are as below.
When connect with muti-links AP, cfg80211_hold_bss() is called by
cfg80211_mlme_assoc() for each cfg80211_bss of all the links. When
assoc response from AP is not success(such as status_code==1), the
ieee80211_link_data of non-primary link(sdata->link[link_id]) is NULL
because ieee80211_assoc_success()->ieee80211_vif_update_links() is
not called for the links.
Then struct cfg80211_rx_assoc_resp resp in cfg80211_rx_assoc_resp() and
struct cfg80211_connect_resp_params cr in __cfg80211_connect_result()
will only have the data of the primary link, and finally function
cfg80211_connect_result_release_bsses() only call cfg80211_unhold_bss()
for the primary link. Then cfg80211_bss of the other links will never free
because its hold is always > 0 now.
Hence assign value for the bss and status from assoc_data since it is
valid for this case. Also assign value of addr from assoc_data when the
link is NULL because the addrs of assoc_data and link both represent the
local link addr and they are same value for success connection.
Fixes: 81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Link: https://lore.kernel.org/r/20230825070055.28164-1-quic_wgong@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add sanity checks for both `tlv_len` and `tlv_bitmap_len` before
decoding data from `event_buf`.
This prevents any malicious or buggy firmware from overflowing
`event_buf` through large values for `tlv_len` and `tlv_bitmap_len`.
Suggested-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/d4f8780527d551552ee96f17a0229e02e1c200d1.1692931954.git.gustavoars@kernel.org
|
|
struct mwifiex_ie_types_rxba_sync
One-element and zero-length arrays are deprecated. So, replace
one-element array in struct mwifiex_ie_types_rxba_sync with
flexible-array member, and refactor the rest of the code, accordingly.
This results in no differences in binary output.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/79c801c69c8beece2f80502c60166036d3c047cc.1692931954.git.gustavoars@kernel.org
|
|
In a TLV encoding scheme, the Length part represents the length after
the header containing the values for type and length. In this case,
`tlv_len` should be:
tlv_len == (sizeof(*tlv_rxba) - 1) - sizeof(tlv_rxba->header) + tlv_bitmap_len
Notice that the `- 1` accounts for the one-element array `bitmap`, which
1-byte size is already included in `sizeof(*tlv_rxba)`.
So, if the above is correct, there is a double-counting of some members
in `struct mwifiex_ie_types_rxba_sync`, when `tlv_buf_left` and `tmp`
are calculated:
968 tlv_buf_left -= (sizeof(*tlv_rxba) + tlv_len);
969 tmp = (u8 *)tlv_rxba + tlv_len + sizeof(*tlv_rxba);
in specific, members:
drivers/net/wireless/marvell/mwifiex/fw.h:777
777 u8 mac[ETH_ALEN];
778 u8 tid;
779 u8 reserved;
780 __le16 seq_num;
781 __le16 bitmap_len;
This is clearly wrong, and affects the subsequent decoding of data in
`event_buf` through `tlv_rxba`:
970 tlv_rxba = (struct mwifiex_ie_types_rxba_sync *)tmp;
Fix this by using `sizeof(tlv_rxba->header)` instead of `sizeof(*tlv_rxba)`
in the calculation of `tlv_buf_left` and `tmp`.
This results in the following binary differences before/after changes:
| drivers/net/wireless/marvell/mwifiex/11n_rxreorder.o
| @@ -4698,11 +4698,11 @@
| drivers/net/wireless/marvell/mwifiex/11n_rxreorder.c:968
| tlv_buf_left -= (sizeof(tlv_rxba->header) + tlv_len);
| - 1da7: lea -0x11(%rbx),%edx
| + 1da7: lea -0x4(%rbx),%edx
| 1daa: movzwl %bp,%eax
| drivers/net/wireless/marvell/mwifiex/11n_rxreorder.c:969
| tmp = (u8 *)tlv_rxba + sizeof(tlv_rxba->header) + tlv_len;
| - 1dad: lea 0x11(%r15,%rbp,1),%r15
| + 1dad: lea 0x4(%r15,%rbp,1),%r15
The above reflects the desired change: avoid counting 13 too many bytes;
which is the total size of the double-counted members in
`struct mwifiex_ie_types_rxba_sync`:
$ pahole -C mwifiex_ie_types_rxba_sync drivers/net/wireless/marvell/mwifiex/11n_rxreorder.o
struct mwifiex_ie_types_rxba_sync {
struct mwifiex_ie_types_header header; /* 0 4 */
|-----------------------------------------------------------------------
| u8 mac[6]; /* 4 6 */ |
| u8 tid; /* 10 1 */ |
| u8 reserved; /* 11 1 */ |
| __le16 seq_num; /* 12 2 */ |
| __le16 bitmap_len; /* 14 2 */ |
| u8 bitmap[1]; /* 16 1 */ |
|----------------------------------------------------------------------|
| 13 bytes|
-----------
/* size: 17, cachelines: 1, members: 7 */
/* last cacheline: 17 bytes */
} __attribute__((__packed__));
Fixes: 99ffe72cdae4 ("mwifiex: process rxba_sync event")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/06668edd68e7a26bbfeebd1201ae077a2a7a8bce.1692931954.git.gustavoars@kernel.org
|
|
The ath12k wireless driver now has a wiki, so advertise it.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230829-ath12kwiki-v1-1-df37127527a1@quicinc.com
|
|
As hostap is marked as obsolete there's no need to have a maintainer. Also
remove the link to the web page.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230828123603.87621-5-kvalo@kernel.org
|
|
Luca's tree hasn't been used for 10 years so remove it.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230828123603.87621-4-kvalo@kernel.org
|
|
Jes' tree hasn't been used for six years so remove it.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230828123603.87621-3-kvalo@kernel.org
|
|
Linville's tree hasn't been used for something like 10 years so remove it.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230828123603.87621-2-kvalo@kernel.org
|
|
The top level entry for wireless drivers already contains to the wiki so no
need to duplicate that in driver entries:
NETWORKING DRIVERS (WIRELESS)
[...]
W: https://wireless.wiki.kernel.org/
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230828123603.87621-1-kvalo@kernel.org
|
|
Fix the following kernel depency lock holding wed_lock with BH disabled.
[ 40.579696] mt798x-wmac 18000000.wifi: attaching wed device 0 version 2
[ 40.604648] platform 15010000.wed: MTK WED WO Firmware Version: DEV_000000, Build Time: 20221208202138
[ 40.613972] platform 15010000.wed: MTK WED WO Chip ID 00 Region 3
[ 40.943617]
[ 40.945118] ========================================================
[ 40.951457] WARNING: possible irq lock inversion dependency detected
[ 40.957797] 5.15.127 #0 Not tainted
[ 40.961276] --------------------------------------------------------
[ 40.967614] insmod/2329 just changed the state of lock:
[ 40.972827] ffffff8004003b08 (&dev->wed_lock){+.+.}-{2:2}, at: mt76_get_rxwi+0x1c/0xac [mt76]
[ 40.981387] but this lock was taken by another, SOFTIRQ-safe lock in the past:
[ 40.988592] (&q->lock){+.-.}-{2:2}
[ 40.988602]
[ 40.988602]
[ 40.988602] and interrupts could create inverse lock ordering between them.
[ 40.988602]
[ 41.003445]
[ 41.003445] other info that might help us debug this:
[ 41.009957] Possible interrupt unsafe locking scenario:
[ 41.009957]
[ 41.016729] CPU0 CPU1
[ 41.021245] ---- ----
[ 41.025761] lock(&dev->wed_lock);
[ 41.029241] local_irq_disable();
[ 41.035145] lock(&q->lock);
[ 41.040620] lock(&dev->wed_lock);
[ 41.046616] <Interrupt>
[ 41.049223] lock(&q->lock);
[ 41.052356]
[ 41.052356] *** DEADLOCK ***
[ 41.052356]
[ 41.058260] 1 lock held by insmod/2329:
[ 41.062085] #0: ffffff80003b9988 (&dev->mutex){....}-{3:3}, at: __driver_attach+0x88/0x190
[ 41.070442]
[ 41.070442] the shortest dependencies between 2nd lock and 1st lock:
[ 41.078257] -> (&q->lock){+.-.}-{2:2} {
[ 41.082177] HARDIRQ-ON-W at:
[ 41.085396] lock_acquire+0xfc/0x2c0
[ 41.090787] _raw_spin_lock_bh+0x84/0xa0
[ 41.096525] mt76_dma_cleanup+0x24c/0x650 [mt76]
[ 41.102977] mt76_dma_cleanup+0x614/0x650 [mt76]
[ 41.109428] mt7915_eeprom_get_power_delta+0x1168/0x2464 [mt7915e]
[ 41.117435] mt7915_eeprom_init+0x40/0x340 [mt7915e]
[ 41.124222] cleanup_module+0x94/0xb28 [mt7915e]
[ 41.130662] platform_probe+0x64/0xbc
[ 41.136139] really_probe.part.0+0x98/0x2f4
[ 41.142134] __driver_probe_device+0x94/0x16c
[ 41.148303] driver_probe_device+0x40/0x120
[ 41.154299] __driver_attach+0x94/0x190
[ 41.159947] bus_for_each_dev+0x5c/0x94
[ 41.165594] driver_attach+0x20/0x30
[ 41.170983] bus_add_driver+0x104/0x1f4
[ 41.176631] driver_register+0x74/0x120
[ 41.182280] __platform_driver_register+0x24/0x30
[ 41.188797] 0xffffffc000cb1074
[ 41.193754] do_one_initcall+0x70/0x2cc
[ 41.199403] do_init_module+0x44/0x240
[ 41.204968] load_module+0x1f5c/0x2874
[ 41.210532] __do_sys_init_module+0x1d8/0x2ac
[ 41.216702] __arm64_sys_init_module+0x18/0x20
[ 41.222958] invoke_syscall.constprop.0+0x4c/0xe0
[ 41.229474] do_el0_svc+0x50/0xf0
[ 41.234602] el0_svc+0x4c/0xcc
[ 41.239471] el0t_64_sync_handler+0xe0/0x110
[ 41.245556] el0t_64_sync+0x15c/0x160
[ 41.251029] IN-SOFTIRQ-W at:
[ 41.254249] lock_acquire+0xfc/0x2c0
[ 41.259638] _raw_spin_lock_bh+0x84/0xa0
[ 41.265372] mt76_queue_tx_complete+0x34/0x70 [mt76]
[ 41.272170] mt76_free_pending_rxwi+0x36c/0x5d0 [mt76]
[ 41.279140] mt76_free_pending_rxwi+0x5c0/0x5d0 [mt76]
[ 41.286111] mt7915_eeprom_get_power_delta+0x620/0x2464 [mt7915e]
[ 41.294026] __napi_poll.constprop.0+0x5c/0x230
[ 41.300372] net_rx_action+0xe4/0x294
[ 41.305847] _stext+0x154/0x4cc
[ 41.310801] do_softirq+0xa4/0xbc
[ 41.315930] __local_bh_enable_ip+0x168/0x174
[ 41.322097] napi_threaded_poll+0xbc/0x140
[ 41.328007] kthread+0x13c/0x150
[ 41.333049] ret_from_fork+0x10/0x20
[ 41.338437] INITIAL USE at:
[ 41.341568] lock_acquire+0xfc/0x2c0
[ 41.346869] _raw_spin_lock_bh+0x84/0xa0
[ 41.352519] mt76_dma_cleanup+0x24c/0x650 [mt76]
[ 41.358882] mt76_dma_cleanup+0x614/0x650 [mt76]
[ 41.365245] mt7915_eeprom_get_power_delta+0x1168/0x2464 [mt7915e]
[ 41.373160] mt7915_eeprom_init+0x40/0x340 [mt7915e]
[ 41.379860] cleanup_module+0x94/0xb28 [mt7915e]
[ 41.386213] platform_probe+0x64/0xbc
[ 41.391602] really_probe.part.0+0x98/0x2f4
[ 41.397511] __driver_probe_device+0x94/0x16c
[ 41.403594] driver_probe_device+0x40/0x120
[ 41.409502] __driver_attach+0x94/0x190
[ 41.415063] bus_for_each_dev+0x5c/0x94
[ 41.420625] driver_attach+0x20/0x30
[ 41.425926] bus_add_driver+0x104/0x1f4
[ 41.431487] driver_register+0x74/0x120
[ 41.437049] __platform_driver_register+0x24/0x30
[ 41.443479] 0xffffffc000cb1074
[ 41.448346] do_one_initcall+0x70/0x2cc
[ 41.453907] do_init_module+0x44/0x240
[ 41.459383] load_module+0x1f5c/0x2874
[ 41.464860] __do_sys_init_module+0x1d8/0x2ac
[ 41.470944] __arm64_sys_init_module+0x18/0x20
[ 41.477113] invoke_syscall.constprop.0+0x4c/0xe0
[ 41.483542] do_el0_svc+0x50/0xf0
[ 41.488582] el0_svc+0x4c/0xcc
[ 41.493364] el0t_64_sync_handler+0xe0/0x110
[ 41.499361] el0t_64_sync+0x15c/0x160
[ 41.504748] }
[ 41.506489] ... key at: [<ffffffc000c65ba0>] __this_module+0x3e0/0xffffffffffffa840 [mt76]
[ 41.515371] ... acquired at:
[ 41.518413] _raw_spin_lock+0x60/0x74
[ 41.522240] mt76_get_rxwi+0x1c/0xac [mt76]
[ 41.526608] mt76_dma_cleanup+0x3e0/0x650 [mt76]
[ 41.531410] mt76_dma_cleanup+0x614/0x650 [mt76]
[ 41.536211] mt7915_dma_init+0x408/0x7b0 [mt7915e]
[ 41.541177] mt7915_register_device+0x310/0x620 [mt7915e]
[ 41.546749] mt7915_mmio_probe+0xcec/0x1d44 [mt7915e]
[ 41.551973] platform_probe+0x64/0xbc
[ 41.555802] really_probe.part.0+0x98/0x2f4
[ 41.560149] __driver_probe_device+0x94/0x16c
[ 41.564670] driver_probe_device+0x40/0x120
[ 41.569017] __driver_attach+0x94/0x190
[ 41.573019] bus_for_each_dev+0x5c/0x94
[ 41.577018] driver_attach+0x20/0x30
[ 41.580758] bus_add_driver+0x104/0x1f4
[ 41.584758] driver_register+0x74/0x120
[ 41.588759] __platform_driver_register+0x24/0x30
[ 41.593628] init_module+0x74/0x1000 [mt7915e]
[ 41.598248] do_one_initcall+0x70/0x2cc
[ 41.602248] do_init_module+0x44/0x240
[ 41.606162] load_module+0x1f5c/0x2874
[ 41.610078] __do_sys_init_module+0x1d8/0x2ac
[ 41.614600] __arm64_sys_init_module+0x18/0x20
[ 41.619209] invoke_syscall.constprop.0+0x4c/0xe0
[ 41.624076] do_el0_svc+0x50/0xf0
[ 41.627555] el0_svc+0x4c/0xcc
[ 41.630776] el0t_64_sync_handler+0xe0/0x110
[ 41.635211] el0t_64_sync+0x15c/0x160
[ 41.639037]
[ 41.640517] -> (&dev->wed_lock){+.+.}-{2:2} {
[ 41.644872] HARDIRQ-ON-W at:
[ 41.648003] lock_acquire+0xfc/0x2c0
[ 41.653219] _raw_spin_lock+0x60/0x74
[ 41.658520] mt76_free_pending_rxwi+0xc0/0x5d0 [mt76]
[ 41.665232] mt76_dma_cleanup+0x1dc/0x650 [mt76]
[ 41.671508] mt7915_eeprom_get_power_delta+0x1830/0x2464 [mt7915e]
[ 41.679336] mt7915_unregister_device+0x5b4/0x910 [mt7915e]
[ 41.686555] mt7915_eeprom_get_target_power+0xb8/0x230 [mt7915e]
[ 41.694209] mt7986_wmac_enable+0xc30/0xcd0 [mt7915e]
[ 41.700909] platform_remove+0x4c/0x64
[ 41.706298] __device_release_driver+0x194/0x240
[ 41.712554] driver_detach+0xc0/0x100
[ 41.717857] bus_remove_driver+0x54/0xac
[ 41.723418] driver_unregister+0x2c/0x54
[ 41.728980] platform_driver_unregister+0x10/0x20
[ 41.735323] mt7915_ops+0x244/0xffffffffffffed58 [mt7915e]
[ 41.742457] __arm64_sys_delete_module+0x170/0x23c
[ 41.748887] invoke_syscall.constprop.0+0x4c/0xe0
[ 41.755229] do_el0_svc+0x50/0xf0
[ 41.760183] el0_svc+0x4c/0xcc
[ 41.764878] el0t_64_sync_handler+0xe0/0x110
[ 41.770788] el0t_64_sync+0x15c/0x160
[ 41.776088] SOFTIRQ-ON-W at:
[ 41.779220] lock_acquire+0xfc/0x2c0
[ 41.784435] _raw_spin_lock+0x60/0x74
[ 41.789737] mt76_get_rxwi+0x1c/0xac [mt76]
[ 41.795580] mt7915_debugfs_rx_log+0x804/0xb74 [mt7915e]
[ 41.802540] mtk_wed_start+0x970/0xaa0
[ 41.807929] mt7915_dma_start+0x26c/0x630 [mt7915e]
[ 41.814455] mt7915_dma_start+0x5a4/0x630 [mt7915e]
[ 41.820981] mt7915_dma_init+0x45c/0x7b0 [mt7915e]
[ 41.827420] mt7915_register_device+0x310/0x620 [mt7915e]
[ 41.834467] mt7915_mmio_probe+0xcec/0x1d44 [mt7915e]
[ 41.841167] platform_probe+0x64/0xbc
[ 41.846469] really_probe.part.0+0x98/0x2f4
[ 41.852291] __driver_probe_device+0x94/0x16c
[ 41.858286] driver_probe_device+0x40/0x120
[ 41.864107] __driver_attach+0x94/0x190
[ 41.869582] bus_for_each_dev+0x5c/0x94
[ 41.875056] driver_attach+0x20/0x30
[ 41.880270] bus_add_driver+0x104/0x1f4
[ 41.885745] driver_register+0x74/0x120
[ 41.891221] __platform_driver_register+0x24/0x30
[ 41.897564] init_module+0x74/0x1000 [mt7915e]
[ 41.903657] do_one_initcall+0x70/0x2cc
[ 41.909130] do_init_module+0x44/0x240
[ 41.914520] load_module+0x1f5c/0x2874
[ 41.919909] __do_sys_init_module+0x1d8/0x2ac
[ 41.925905] __arm64_sys_init_module+0x18/0x20
[ 41.931989] invoke_syscall.constprop.0+0x4c/0xe0
[ 41.938331] do_el0_svc+0x50/0xf0
[ 41.943285] el0_svc+0x4c/0xcc
[ 41.947981] el0t_64_sync_handler+0xe0/0x110
[ 41.953892] el0t_64_sync+0x15c/0x160
[ 41.959192] INITIAL USE at:
[ 41.962238] lock_acquire+0xfc/0x2c0
[ 41.967365] _raw_spin_lock+0x60/0x74
[ 41.972580] mt76_free_pending_rxwi+0xc0/0x5d0 [mt76]
[ 41.979206] mt76_dma_cleanup+0x1dc/0x650 [mt76]
[ 41.985395] mt7915_eeprom_get_power_delta+0x1830/0x2464 [mt7915e]
[ 41.993137] mt7915_unregister_device+0x5b4/0x910 [mt7915e]
[ 42.000270] mt7915_eeprom_get_target_power+0xb8/0x230 [mt7915e]
[ 42.007837] mt7986_wmac_enable+0xc30/0xcd0 [mt7915e]
[ 42.014450] platform_remove+0x4c/0x64
[ 42.019753] __device_release_driver+0x194/0x240
[ 42.025922] driver_detach+0xc0/0x100
[ 42.031137] bus_remove_driver+0x54/0xac
[ 42.036612] driver_unregister+0x2c/0x54
[ 42.042087] platform_driver_unregister+0x10/0x20
[ 42.048344] mt7915_ops+0x244/0xffffffffffffed58 [mt7915e]
[ 42.055391] __arm64_sys_delete_module+0x170/0x23c
[ 42.061735] invoke_syscall.constprop.0+0x4c/0xe0
[ 42.067990] do_el0_svc+0x50/0xf0
[ 42.072857] el0_svc+0x4c/0xcc
[ 42.077466] el0t_64_sync_handler+0xe0/0x110
[ 42.083289] el0t_64_sync+0x15c/0x160
[ 42.088503] }
[ 42.090157] ... key at: [<ffffffc000c65c10>] __this_module+0x450/0xffffffffffffa840 [mt76]
[ 42.098951] ... acquired at:
[ 42.101907] __lock_acquire+0x718/0x1df0
[ 42.105994] lock_acquire+0xfc/0x2c0
[ 42.109734] _raw_spin_lock+0x60/0x74
[ 42.113561] mt76_get_rxwi+0x1c/0xac [mt76]
[ 42.117929] mt7915_debugfs_rx_log+0x804/0xb74 [mt7915e]
[ 42.123415] mtk_wed_start+0x970/0xaa0
[ 42.127328] mt7915_dma_start+0x26c/0x630 [mt7915e]
[ 42.132379] mt7915_dma_start+0x5a4/0x630 [mt7915e]
[ 42.137430] mt7915_dma_init+0x45c/0x7b0 [mt7915e]
[ 42.142395] mt7915_register_device+0x310/0x620 [mt7915e]
[ 42.147967] mt7915_mmio_probe+0xcec/0x1d44 [mt7915e]
[ 42.153192] platform_probe+0x64/0xbc
[ 42.157019] really_probe.part.0+0x98/0x2f4
[ 42.161367] __driver_probe_device+0x94/0x16c
[ 42.165887] driver_probe_device+0x40/0x120
[ 42.170234] __driver_attach+0x94/0x190
[ 42.174235] bus_for_each_dev+0x5c/0x94
[ 42.178235] driver_attach+0x20/0x30
[ 42.181974] bus_add_driver+0x104/0x1f4
[ 42.185974] driver_register+0x74/0x120
[ 42.189974] __platform_driver_register+0x24/0x30
[ 42.194842] init_module+0x74/0x1000 [mt7915e]
[ 42.199460] do_one_initcall+0x70/0x2cc
[ 42.203460] do_init_module+0x44/0x240
[ 42.207376] load_module+0x1f5c/0x2874
[ 42.211290] __do_sys_init_module+0x1d8/0x2ac
[ 42.215813] __arm64_sys_init_module+0x18/0x20
[ 42.220421] invoke_syscall.constprop.0+0x4c/0xe0
[ 42.225288] do_el0_svc+0x50/0xf0
[ 42.228768] el0_svc+0x4c/0xcc
[ 42.231989] el0t_64_sync_handler+0xe0/0x110
[ 42.236424] el0t_64_sync+0x15c/0x160
[ 42.240249]
[ 42.241730]
[ 42.241730] stack backtrace:
[ 42.246074] CPU: 1 PID: 2329 Comm: insmod Not tainted 5.15.127 #0
[ 42.252157] Hardware name: GainStrong Oolite-MT7981B V1 Dev Board (NAND boot) (DT)
[ 42.259712] Call trace:
[ 42.262147] dump_backtrace+0x0/0x174
[ 42.265802] show_stack+0x14/0x20
[ 42.269108] dump_stack_lvl+0x84/0xac
[ 42.272761] dump_stack+0x14/0x2c
[ 42.276066] print_irq_inversion_bug.part.0+0x1b0/0x1c4
[ 42.281285] mark_lock+0x8b8/0x8bc
[ 42.284678] __lock_acquire+0x718/0x1df0
[ 42.288592] lock_acquire+0xfc/0x2c0
[ 42.292158] _raw_spin_lock+0x60/0x74
[ 42.295811] mt76_get_rxwi+0x1c/0xac [mt76]
[ 42.300008] mt7915_debugfs_rx_log+0x804/0xb74 [mt7915e]
[ 42.305320] mtk_wed_start+0x970/0xaa0
[ 42.309059] mt7915_dma_start+0x26c/0x630 [mt7915e]
[ 42.313937] mt7915_dma_start+0x5a4/0x630 [mt7915e]
[ 42.318815] mt7915_dma_init+0x45c/0x7b0 [mt7915e]
[ 42.323606] mt7915_register_device+0x310/0x620 [mt7915e]
[ 42.329005] mt7915_mmio_probe+0xcec/0x1d44 [mt7915e]
[ 42.334056] platform_probe+0x64/0xbc
[ 42.337711] really_probe.part.0+0x98/0x2f4
[ 42.341885] __driver_probe_device+0x94/0x16c
[ 42.346232] driver_probe_device+0x40/0x120
[ 42.350407] __driver_attach+0x94/0x190
[ 42.354234] bus_for_each_dev+0x5c/0x94
[ 42.358061] driver_attach+0x20/0x30
[ 42.361627] bus_add_driver+0x104/0x1f4
[ 42.365454] driver_register+0x74/0x120
[ 42.369282] __platform_driver_register+0x24/0x30
[ 42.373977] init_module+0x74/0x1000 [mt7915e]
[ 42.378423] do_one_initcall+0x70/0x2cc
[ 42.382249] do_init_module+0x44/0x240
[ 42.385990] load_module+0x1f5c/0x2874
[ 42.389733] __do_sys_init_module+0x1d8/0x2ac
[ 42.394082] __arm64_sys_init_module+0x18/0x20
[ 42.398518] invoke_syscall.constprop.0+0x4c/0xe0
[ 42.403211] do_el0_svc+0x50/0xf0
[ 42.406517] el0_svc+0x4c/0xcc
[ 42.409565] el0t_64_sync_handler+0xe0/0x110
[ 42.413827] el0t_64_sync+0x15c/0x160
[ 42.674858] mt798x-wmac 18000000.wifi: HW/SW Version: 0x8a108a10, Build Time: 20221208201745a
[ 42.674858]
[ 42.692078] mt798x-wmac 18000000.wifi: WM Firmware Version: ____000000, Build Time: 20221208201806
[ 42.735606] mt798x-wmac 18000000.wifi: WA Firmware Version: DEV_000000, Build Time: 20221208202048
Tested-by: Daniel Golle <daniel@makrotopia.org>
Fixes: 2666bece0905 ("wifi: mt76: introduce rxwi and rx token utility routines")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/ee80be41c2a8d8749d83c6950a272a5e77aadd45.1693228333.git.lorenzo@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations
- Store netdevs in an xarray, to simplify iterating over netdevs
- Refactor nexthop selection for multipath routes
- Improve sched class lifetime handling
- Add backup nexthop ID support for bridge
- Implement drop reasons support in openvswitch
- Several data races annotations and fixes
- Constify the sk parameter of routing functions
- Prepend kernel version to netconsole message
Protocols:
- Implement support for TCP probing the peer being under memory
pressure
- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes
- In-kernel support for the TLS alert protocol
- Better support for UDP reuseport with connected sockets
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size
- Get rid of additional ancillary per MPTCP connection struct socket
- Implement support for BPF-based MPTCP packet schedulers
- Format MPTCP subtests selftests results in TAP
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation
BPF:
- Multi-buffer support in AF_XDP
- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds
- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it
- Add SO_REUSEPORT support for TC bpf_sk_assign
- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64
- Support defragmenting IPv(4|6) packets in BPF
- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling
- Introduce bpf map element count and enable it for all program types
- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress
- Add uprobe support for the bpf_get_func_ip helper
- Check skb ownership against full socket
- Support for up to 12 arguments in BPF trampoline
- Extend link_info for kprobe_multi and perf_event links
Netfilter:
- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types
Driver API:
- Page pool optimizations, to improve data locality and cache usage
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers
- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info
- Extend and use the yaml devlink specs to [re]generate the split ops
- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes
- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool
- Remove phylink legacy mode support
- Support offload LED blinking to phy
- Add devlink port function attributes for IPsec
New hardware / drivers:
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers:
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering"
* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Move crypto engine callback from tfm ctx into algorithm object
- Fix atomic sleep bug in crypto_destroy_instance
- Move lib/mpi into lib/crypto
Algorithms:
- Add chacha20 and poly1305 implementation for powerpc p10
Drivers:
- Add AES skcipher and aead support to starfive
- Add Dynamic Boost Control support to ccp
- Add support for STM32P13 platform to stm32"
* tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (149 commits)
Revert "dt-bindings: crypto: qcom,prng: Add SM8450"
crypto: chelsio - Remove unused declarations
X.509: if signature is unsupported skip validation
crypto: qat - fix crypto capability detection for 4xxx
crypto: drivers - Explicitly include correct DT includes
crypto: engine - Remove crypto_engine_ctx
crypto: zynqmp - Use new crypto_engine_op interface
crypto: virtio - Use new crypto_engine_op interface
crypto: stm32 - Use new crypto_engine_op interface
crypto: jh7110 - Use new crypto_engine_op interface
crypto: rk3288 - Use new crypto_engine_op interface
crypto: omap - Use new crypto_engine_op interface
crypto: keembay - Use new crypto_engine_op interface
crypto: sl3516 - Use new crypto_engine_op interface
crypto: caam - Use new crypto_engine_op interface
crypto: aspeed - Remove non-standard sha512 algorithms
crypto: aspeed - Use new crypto_engine_op interface
crypto: amlogic - Use new crypto_engine_op interface
crypto: sun8i-ss - Use new crypto_engine_op interface
crypto: sun8i-ce - Use new crypto_engine_op interface
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have a lot of code refactoring using common helpers and ended up
removing more lines then we're adding this release cycle.
Nothing really stands out, just small updates all over the place.
Core GPIOLIB updates:
- wake-up poll() in user-space on device unbind
- improve fwnode usage
- interrupt domain handling improvements
- correctly handle the ngpios property in gpio-mmio
Driver cleanups:
- remove unneeded calls to platform_set_drvdata() all around the
place
- remove unneeded of_match_ptr() expansions whenever a driver depends
on CONFIG_OF
- remove redundant calls to dev_err_probe() from gpio-omap and
gpio-davinci
Driver improvements:
- use autopointers and guards from cleanup.h in gpio-sim
- shrink code in gpio-sim using some common helpers
- convert the idio family of drivers to using gpio-regmap
- convert gpio-ws16c48 to using gpio-regmap
- use devres to simplify code in gpio-pisosr and gpio-mxc
- update gpio-sifive: support IRQ wake, improve interrupt handling,
allow building as module
- make gpio-ge and gpio-bcm-kona OF-independent (plus some minor
tweaks)
- add support for new models in gpio-pca953x and gpio-ds4520
- add runtime PM support to gpio-mxc
- fix a build warning in gpio-mxs
- add support for adding pin ranges to gpio-mlxbf3
- add counter/timer support to gpio-104-dio-48e
- switch to dynamic GPIO base allocation in gpio-vf610
- minor oneliners here and there
Device-tree bindings updates:
- enable the gpio-line-names property in snps,dw-apb and STMPE GPIO
- document new models in fsl-imx-gpio, ds4520 and pca95xx
- convert the bindings for brcm,kona-gpio to YAML"
* tag 'gpio-updates-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (94 commits)
gpio: pca953x: add support for TCA9538
dt-bindings: gpio: pca95xx: document new tca9538 chip
gpio: pca953x: Use i2c_get_match_data()
gpio: mlxbf3: use capital "OR" for multiple licenses in SPDX
gpio: pcf857x: Extend match data support for OF tables
gpio: vf610: switch to dynamic allocat GPIO base
gpiolib: provide and use gpiod_line_state_notify()
gpio: cdev: wake up lineevent poll() on device unbind
gpio: cdev: wake up linereq poll() on device unbind
gpio: cdev: wake up chardev poll() on device unbind
gpiolib: add a second blocking notifier to struct gpio_device
gpio: cdev: open-code to_gpio_chardev_data()
gpiolib: rename the gpio_device notifier
gpio: mlxbf3: Support add_pin_ranges()
gpio: mxc: Use helper function devm_clk_get_optional_enabled()
gpio: pca9570: fix kerneldoc
gpio: sim: simplify code with cleanup helpers
gpio: sim: replace memmove() + strstrip() with skip_spaces() + strim()
gpio: sim: simplify gpio_sim_device_config_live_store()
gpio: mxc: release the parent IRQ in runtime suspend
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Renesas HS3001
Chip support added to existing drivers:
- pmbus/mp2975 driver now supports MP2971 and MP2973
Functional improvements:
- Additional voltage and temperature sensor support for
NCT6798/NCT6799 in nt6755 driver
- it87 driver now detects AMDTSI sensor type
- dimmtemp now supports more than 32 DIMMs
Driver removals:
- sm665 driver removed as unsupportable and long since obsolete
.. and minor fixes, cleanups, and simplifications in several drivers"
* tag 'hwmon-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (57 commits)
hwmon: (tmp513) Simplify probe()
hwmon: (tmp513) Fix the channel number in tmp51x_is_visible()
hwmon: (mlxreg-fan) Extend number of supported fans
hwmon: (sis5595) Do PCI error checks on own line
hwmon: (vt8231) Do PCI error checks on own line
hwmon: (via686a) Do PCI error checks on own line
hwmon: pmbus: Fix -EIO seen on pli1209
hwmon: pmbus: Drop unnecessary clear fault page
hwmon: pmbus: Reduce clear fault page invocations
hwmon: (nsa320-hwmon) Remove redundant of_match_ptr()
hwmon: (pmbus/ucd9200) fix Wvoid-pointer-to-enum-cast warning
hwmon: (pmbus/ucd9000) fix Wvoid-pointer-to-enum-cast warning
hwmon: (pmbus/tps53679) fix Wvoid-pointer-to-enum-cast warning
hwmon: (pmbus/ibm-cffps) fix Wvoid-pointer-to-enum-cast warning
hwmon: (tmp513) fix Wvoid-pointer-to-enum-cast warning
hwmon: (max6697) fix Wvoid-pointer-to-enum-cast warning
hwmon: (max20730) fix Wvoid-pointer-to-enum-cast warning
hwmon: (lm90) fix Wvoid-pointer-to-enum-cast warning
hwmon: (lm85) fix Wvoid-pointer-to-enum-cast warning
hwmon: (lm75) fix Wvoid-pointer-to-enum-cast warning
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Convert drivers to use the ->remove_new() callback
- Propagate the removable attribute for the card's device
MMC host:
- Convert drivers to use the ->remove_new() callback
- atmel-mci: Convert to gpio descriptors and cleanup the code
- davinci: Make SDIO irq truly optional
- renesas_sdhi: Register irqs before registering controller
- sdhci: Simplify the sdhci_pltfm_* interface a bit
- sdhci-esdhc-imx: Improve support for the 1.8V errata
- sdhci-of-at91: Add support for the microchip sam9x7 variant
- sdhci-of-dwcmshc: Add support for runtime PM
- sdhci-pci-o2micro: Add support for the new Bayhub GG8 variant
- sdhci-sprd: Add support for SD high-speed mode tuning
- uniphier-sd: Register irqs before registering controller"
* tag 'mmc-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (108 commits)
mmc: atmel-mci: Move card detect gpio polarity quirk to gpiolib
mmc: atmel-mci: move atmel MCI header file
mmc: atmel-mci: Convert to gpio descriptors
mmc: sdhci-sprd: Add SD HS mode online tuning
mmc: core: Add host specific tuning support for SD HS mode
mmc: sdhci-of-dwcmshc: Add runtime PM operations
mmc: sdhci-of-dwcmshc: Add error handling in dwcmshc_resume
mmc: sdhci-esdhc-imx: improve ESDHC_FLAG_ERR010450
mmc: sdhci-pltfm: Rename sdhci_pltfm_register()
mmc: sdhci-pltfm: Remove sdhci_pltfm_unregister()
mmc: sdhci-st: Use sdhci_pltfm_remove()
mmc: sdhci-pxav2: Use sdhci_pltfm_remove()
mmc: sdhci-of-sparx5: Use sdhci_pltfm_remove()
mmc: sdhci-of-hlwd: Use sdhci_pltfm_remove()
mmc: sdhci-of-esdhc: Use sdhci_pltfm_remove()
mmc: sdhci-of-at91: Use sdhci_pltfm_remove()
mmc: sdhci-of-arasan: Use sdhci_pltfm_remove()
mmc: sdhci-iproc: Use sdhci_pltfm_remove()
mmc: sdhci_f_sdh30: Use sdhci_pltfm_remove()
mmc: sdhci-dove: Use sdhci_pltfm_remove()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"There's been quite a lot of generic activity here, but more
administrative than featuers. We also have a bunch of new drivers,
including one that's part of a MFD so we pulled in the core parts of
that:
- Lots of work from both Yang Yingliang and Andy Shevchenko on moving
to host/device/controller based terminology for devices.
- QuadSPI SPI support for Allwinner sun6i.
- New device support Cirrus Logic CS43L43, Longsoon, Qualcomm GENI
QuPv3 and StarFive JH7110 QSPI"
* tag 'spi-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (151 commits)
spi: at91-usart: Use PTR_ERR_OR_ZERO() to simplify code
spi: spi-sn-f-ospi: switch to use modern name
spi: sifive: switch to use modern name
spi: sh: switch to use modern name
spi: sh-sci: switch to use modern name
spi: sh-msiof: switch to use modern name
spi: sh-hspi: switch to use modern name
spi: sc18is602: switch to use modern name
spi: s3c64xx: switch to use modern name
spi: rzv2m-csi: switch to use devm_spi_alloc_host()
spi: rspi: switch to use spi_alloc_host()
spi: rockchip: switch to use modern name
spi: rockchip-sfc: switch to use modern name
spi: realtek-rtl: switch to use devm_spi_alloc_host()
spi: rb4xx: switch to use modern name
spi: qup: switch to use modern name
spi: spi-qcom-qspi: switch to use modern name
spi: pxa2xx: switch to use modern name
spi: ppc4xx: switch to use modern name
spi: spl022: switch to use modern name
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"Other than new device support and some minor fixes this has been a
really quiet release, the only notable things are the new drivers.
There's a couple of MFDs among the new devices so the generic parts
are pulled in:
- Support for Analog Devices MAX77831/57/59, Awinc AW37503, Qualcom
PMX75 and RFGEN, RealTek RT5733, RichTek RTQ2208 and Texas
Instruments TPS65086"
* tag 'regulator-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (68 commits)
regulator: userspace-consumer: Drop event support for this cycle
regulator: aw37503: Switch back to use struct i2c_driver's .probe()
dt-bindings: regulator: qcom,rpmh-regulator: allow i, j, l, m & n as RPMh resource name suffix
regulator: dt-bindings: Add Awinic AW37503
regulator: aw37503: add regulator driver for Awinic AW37503
regulator: tps65086: Select dedicated regulator config for chip variant
mfd: tps65086: Read DEVICE ID register 1 from device
regulator: raa215300: Update help description
regulator: raa215300: Add missing blank space
regulator: raa215300: Change rate from 32000->32768
regulator: db8500-prcmu: Remove unused declaration power_state_active_is_enabled()
regulator: raa215300: Add const definition
regulator: raa215300: Fix resource leak in case of error
regulator: rtq2208: Switch back to use struct i2c_driver's .probe()
regulator: lp872x: Fix Wvoid-pointer-to-enum-cast warning
regulator: max77857: Fix Wvoid-pointer-to-enum-cast warning
regulator: ltc3589: Fix Wvoid-pointer-to-enum-cast warning
regulator: qcom_rpm-regulator: Use devm_kmemdup to replace devm_kmalloc + memcpy
regulator: tps6286x-regulator: Remove redundant of_match_ptr() macros
regulator: pfuze100-regulator: Remove redundant of_match_ptr() macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This is a much quieter release than the past few, there's one small
API addition that I noticed a user for in ALSA and a bunch of
cleanups:
- Provide an interface for determining if a register is present in
the cache and add a user of it in ALSA.
- Full support for dynamic allocations, following the temporary
bodges that were done as fixes in the previous release.
- Remove the unused and questionably working 64 bit support"
* tag 'regmap-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Fix the type used for a bitmap pointer
regmap: Remove dynamic allocation warnings for rbtree and maple
regmap: rbtree: Use alloc_flags for memory allocations
regmap: maple: Use alloc_flags for memory allocations
regmap: Reject fast_io regmap configurations with RBTREE and MAPLE caches
ALSA: hda: Use regcache_reg_cached() rather than open coding
regmap: Provide test for regcache_reg_present()
regmap: Let users check if a register is cached
regmap: Provide user selectable option to enable regmap
regmap: mmio: Remove unused 64-bit support code
regmap: cache: Revert "Add 64-bit mode support"
regmap: Revert "add 64-bit mode support" and Co.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi
Pull HSI update from Sebastian Reichel:
- explicitly include correct DT includes
* tag 'hsi-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
hsi: omap_ssi: Explicitly include correct DT includes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
- core: avoid duplicate hwmon device from thermal framework
- convert multiple drivers to devm_platform_ioremap_resource
- at91-reset: add sysfs interface to the power on reason
- misc small fixes and improvements
* tag 'for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: qcom_pmi8998_charger: fix charger status
power: supply: qcom_pmi8998_charger: remove CHARGE_CONTROL_LIMIT_* props
power: supply: qcom_pmi8998_charger: fix uninitialized variable
power: reset: oxnas-restart: remove obsolete restart driver
power: supply: core: Avoid duplicate hwmon device from thermal framework
power: reset: ocelot: Convert to devm_platform_ioremap_resource()
power: reset: msm: Convert to devm_platform_ioremap_resource()
power: reset: gemini-poweroff: Convert to devm_platform_ioremap_resource()
power: reset: brcm-kona: Convert to devm_platform_ioremap_resource()
power: reset: at91-sama5d2_shdwc: Convert to devm_platform_ioremap_resource()
power: reset: at91-poweroff: Convert to devm_platform_ioremap_resource()
power: reset: at91-reset: add sysfs interface to the power on reason
power: supply: bd99954: make read-only array sub_status_reg
power: supply: bq24190: Considers FORCE_20PCT when getting IPRECHG
power: Explicitly include correct DT includes
|
|
Pull auxdisplay update from Miguel Ojeda:
- hd44780: move cursor home after clear display command
The change allows to support displays like the NewHaven
NHD-0220DZW-AG5 which has a non-standard controller.
* tag 'auxdisplay-6.6' of https://github.com/ojeda/linux:
auxdisplay: hd44780: move cursor home after clear display command
|
|
Pull rust updates from Miguel Ojeda:
"In terms of lines, most changes this time are on the pinned-init API
and infrastructure. While we have a Rust version upgrade, and thus a
bunch of changes from the vendored 'alloc' crate as usual, this time
those do not account for many lines.
Toolchain and infrastructure:
- Upgrade to Rust 1.71.1. This is the second such upgrade, which is a
smaller jump compared to the last time.
This version allows us to remove the '__rust_*' allocator functions
-- the compiler now generates them as expected, thus now our
'KernelAllocator' is used.
It also introduces the 'offset_of!' macro in the standard library
(as an unstable feature) which we will need soon. So far, we were
using a declarative macro as a prerequisite in some not-yet-landed
patch series, which did not support sub-fields (i.e. nested
structs):
#[repr(C)]
struct S {
a: u16,
b: (u8, u8),
}
assert_eq!(offset_of!(S, b.1), 3);
- Upgrade to bindgen 0.65.1. This is the first time we upgrade its
version.
Given it is a fairly big jump, it comes with a fair number of
improvements/changes that affect us, such as a fix needed to
support LLVM 16 as well as proper support for '__noreturn' C
functions, which are now mapped to return the '!' type in Rust:
void __noreturn f(void); // C
pub fn f() -> !; // Rust
- 'scripts/rust_is_available.sh' improvements and fixes.
This series takes care of all the issues known so far and adds a
few new checks to cover for even more cases, plus adds some more
help texts. All this together will hopefully make problematic
setups easier to identify and to be solved by users building the
kernel.
In addition, it adds a test suite which covers all branches of the
shell script, as well as tests for the issues found so far.
- Support rust-analyzer for out-of-tree modules too.
- Give 'cfg's to rust-analyzer for the 'core' and 'alloc' crates.
- Drop 'scripts/is_rust_module.sh' since it is not needed anymore.
Macros crate:
- New 'paste!' proc macro.
This macro is a more flexible version of 'concat_idents!': it
allows the resulting identifier to be used to declare new items and
it allows to transform the identifiers before concatenating them,
e.g.
let x_1 = 42;
paste!(let [<x _2>] = [<x _1>];);
assert!(x_1 == x_2);
The macro is then used for several of the pinned-init API changes
in this pull.
Pinned-init API:
- Make '#[pin_data]' compatible with conditional compilation of
fields, allowing to write code like:
#[pin_data]
pub struct Foo {
#[cfg(CONFIG_BAR)]
a: Bar,
#[cfg(not(CONFIG_BAR))]
a: Baz,
}
- New '#[derive(Zeroable)]' proc macro for the 'Zeroable' trait,
which allows 'unsafe' implementations for structs where every field
implements the 'Zeroable' trait, e.g.:
#[derive(Zeroable)]
pub struct DriverData {
id: i64,
buf_ptr: *mut u8,
len: usize,
}
- Add '..Zeroable::zeroed()' syntax to the 'pin_init!' macro for
zeroing all other fields, e.g.:
pin_init!(Buf {
buf: [1; 64],
..Zeroable::zeroed()
});
- New '{,pin_}init_array_from_fn()' functions to create array
initializers given a generator function, e.g.:
let b: Box<[usize; 1_000]> = Box::init::<Error>(
init_array_from_fn(|i| i)
).unwrap();
assert_eq!(b.len(), 1_000);
assert_eq!(b[123], 123);
- New '{,pin_}chain' methods for '{,Pin}Init<T, E>' that allow to
execute a closure on the value directly after initialization, e.g.:
let foo = init!(Foo {
buf <- init::zeroed()
}).chain(|foo| {
foo.setup();
Ok(())
});
- Support arbitrary paths in init macros, instead of just identifiers
and generic types.
- Implement the 'Zeroable' trait for the 'UnsafeCell<T>' and
'Opaque<T>' types.
- Make initializer values inaccessible after initialization.
- Make guards in the init macros hygienic.
'allocator' module:
- Use 'krealloc_aligned()' in 'KernelAllocator::alloc' preventing
misaligned allocations when the Rust 1.71.1 upgrade is applied
later in this pull.
The equivalent fix for the previous compiler version (where
'KernelAllocator' is not yet used) was merged into 6.5 already,
which added the 'krealloc_aligned()' function used here.
- Implement 'KernelAllocator::{realloc, alloc_zeroed}' for
performance, using 'krealloc_aligned()' too, which forwards the
call to the C API.
'types' module:
- Make 'Opaque' be '!Unpin', removing the need to add a
'PhantomPinned' field to Rust structs that contain C structs which
must not be moved.
- Make 'Opaque' use 'UnsafeCell' as the outer type, rather than
inner.
Documentation:
- Suggest obtaining the source code of the Rust's 'core' library
using the tarball instead of the repository.
MAINTAINERS:
- Andreas and Alice, from Samsung and Google respectively, are
joining as reviewers of the "RUST" entry.
As well as a few other minor changes and cleanups"
* tag 'rust-6.6' of https://github.com/Rust-for-Linux/linux: (42 commits)
rust: init: update expanded macro explanation
rust: init: add `{pin_}chain` functions to `{Pin}Init<T, E>`
rust: init: make `PinInit<T, E>` a supertrait of `Init<T, E>`
rust: init: implement `Zeroable` for `UnsafeCell<T>` and `Opaque<T>`
rust: init: add support for arbitrary paths in init macros
rust: init: add functions to create array initializers
rust: init: add `..Zeroable::zeroed()` syntax for zeroing all missing fields
rust: init: make initializer values inaccessible after initializing
rust: init: wrap type checking struct initializers in a closure
rust: init: make guards in the init macros hygienic
rust: add derive macro for `Zeroable`
rust: init: make `#[pin_data]` compatible with conditional compilation of fields
rust: init: consolidate init macros
docs: rust: clarify what 'rustup override' does
docs: rust: update instructions for obtaining 'core' source
docs: rust: add command line to rust-analyzer section
scripts: generate_rust_analyzer: provide `cfg`s for `core` and `alloc`
rust: bindgen: upgrade to 0.65.1
rust: enable `no_mangle_with_rust_abi` Clippy lint
rust: upgrade to Rust 1.71.1
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
- Restrict linking of keys to .ima and .evm keyrings based on
digitalSignature attribute in the certificate
- PowerVM: load machine owner keys into the .machine [1] keyring
- PowerVM: load module signing keys into the secondary trusted keyring
(keys blessed by the vendor)
- tpm_tis_spi: half-duplex transfer mode
- tpm_tis: retry corrupted transfers
- Apply revocation list (.mokx) to an all system keyrings (e.g.
.machine keyring)
Link: https://blogs.oracle.com/linux/post/the-machine-keyring [1]
* tag 'tpmdd-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
certs: Reference revocation list for all keyrings
tpm/tpm_tis_synquacer: Use module_platform_driver macro to simplify the code
tpm: remove redundant variable len
tpm_tis: Resend command to recover from data transfer errors
tpm_tis: Use responseRetry to recover from data transfer errors
tpm_tis: Move CRC check to generic send routine
tpm_tis_spi: Add hardware wait polling
KEYS: Replace all non-returning strlcpy with strscpy
integrity: PowerVM support for loading third party code signing keys
integrity: PowerVM machine keyring enablement
integrity: check whether imputed trust is enabled
integrity: remove global variable from machine_keyring.c
integrity: ignore keys failing CA restrictions on non-UEFI platform
integrity: PowerVM support for loading CA keys on machine keyring
integrity: Enforce digitalSignature usage in the ima and evm keyrings
KEYS: DigitalSignature link restriction
tpm_tis: Revert "tpm_tis: Disable interrupts on ThinkPad T490s"
|
|
Merge in late fixes to prepare for the 6.6 net-next PR.
No conflicts.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull nolibc updates from Shuah Khan:
"Nolibc:
- improved portability by removing build errors with -ENOSYS
- added syscall6() on MIPS to support pselect6() and mmap()
- added setvbuf(), rmdir(), pipe(), pipe2()
- add support for ppc/ppc64
- environ is no longer optional
- fixed frame pointer issues at -O0
- dropped sys_stat() in favor of sys_statx()
- centralized _start_c() to remove lots of asm code
- switched size_t to __SIZE_TYPE__
Selftests:
- improved status reporting (success/warning/failure counts, path to
log file)
- various code cleanups (indent, unused variables, ...)
- more consistent test numbering
- enabled compiler warnings
- dropped unreliable chmod_net test
- improved reliability (create /dev/zero & /tmp, rely less on /proc)
- new tests (brk/sbrk/mmap/munmap)
- improved compatibility with musl
- new run-nolibc-test target to build and run natively
- new run-libc-test target to build and run against native libc
- made the cmdline parser more reliable against boolean arguments
- dropped dependency on memfd for vfprintf() test
- nolibc-test is no longer stripped
- added support for extending ARCH via XARCH
Other:
- add Thomas as co-maintainer"
* tag 'linux-kselftest-nolibc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (103 commits)
tools/nolibc: avoid undesired casts in the __sysret() macro
tools/nolibc: keep brk(), sbrk(), mmap() away from __sysret()
tools/nolibc: silence ppc64 compile warnings
selftests/nolibc: libc-test: use HOSTCC instead of CC
tools/nolibc: stackprotector.h: make __stack_chk_init static
selftests/nolibc: allow report with existing test log
selftests/nolibc: add test support for ppc64
selftests/nolibc: add test support for ppc64le
selftests/nolibc: add test support for ppc
selftests/nolibc: add XARCH and ARCH mapping support
tools/nolibc: add support for powerpc64
tools/nolibc: add support for powerpc
MAINTAINERS: nolibc: add myself as co-maintainer
selftests/nolibc: enable compiler warnings
selftests/nolibc: don't strip nolibc-test
selftests/nolibc: prevent out of bounds access in expect_vfprintf
selftests/nolibc: use correct return type for read() and write()
selftests/nolibc: avoid sign-compare warnings
selftests/nolibc: avoid unused parameter warnings
selftests/nolibc: make functions static if possible
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- add support for running Rust documentation tests as KUnit tests
- make init, str, sync, types doctests compilable/testable
- add support for attributes API which include speed, modules
attributes, ability to filter and report attributes
- add support for marking tests slow using attributes API
- add attributes API documentation
- fix a wild-memory-access bug in kunit_filter_suites() and a possible
memory leak in kunit_filter_suites()
- add support for counting number of test suites in a module, list
action to kunit test modules, and test filtering on module tests
* tag 'linux-kselftest-kunit-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits)
kunit: fix struct kunit_attr header
kunit: replace KUNIT_TRIGGER_STATIC_STUB maro with KUNIT_STATIC_STUB_REDIRECT
kunit: Allow kunit test modules to use test filtering
kunit: Make 'list' action available to kunit test modules
kunit: Report the count of test suites in a module
kunit: fix uninitialized variables bug in attributes filtering
kunit: fix possible memory leak in kunit_filter_suites()
kunit: fix wild-memory-access bug in kunit_filter_suites()
kunit: Add documentation of KUnit test attributes
kunit: add tests for filtering attributes
kunit: time: Mark test as slow using test attributes
kunit: memcpy: Mark tests as slow using test attributes
kunit: tool: Add command line interface to filter and report attributes
kunit: Add ability to filter attributes
kunit: Add module attribute
kunit: Add speed attribute
kunit: Add test attributes API structure
MAINTAINERS: add Rust KUnit files to the KUnit entry
rust: support running Rust documentation tests as KUnit ones
rust: types: make doctests compilable/testable
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"A mix of fixes, enhancements, and new tests. Bulk of the changes
enhance and fix rseq and resctrl tests.
In addition, user_events, dmabuf-heaps and perf_events are added to
default kselftest build and test coverage. A futex test fix, enhance
prctl test coverage, and minor fixes are included in this update"
* tag 'linux-kselftest-next-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (32 commits)
selftests: cachestat: use proper syscall number macro
selftests: cachestat: properly link in librt
selftests/futex: Order calls to futex_lock_pi
selftests: Hook more tests into the build infrastructure
selftests/user_events: Reenable build
selftests/filesystems: Add six consecutive 'x' characters to mktemp
selftests/rseq: Use rseq_unqual_scalar_typeof in macros
selftests/rseq: Fix arm64 buggy load-acquire/store-release macros
selftests/rseq: Implement rseq_unqual_scalar_typeof
selftests/rseq: Fix CID_ID typo in Makefile
selftests:prctl: add set-process-name to .gitignore
selftests:prctl: Fix make clean override warning
selftests/resctrl: Remove test type checks from cat_val()
selftests/resctrl: Pass the real number of tests to show_cache_info()
selftests/resctrl: Move CAT/CMT test global vars to function they are used in
selftests/resctrl: Don't use variable argument list for ->setup()
selftests/resctrl: Don't pass test name to fill_buf
selftests/resctrl: Improve parameter consistency in fill_buf
selftests/resctrl: Remove unnecessary startptr global from fill_buf
selftests/resctrl: Remove "malloc_and_init_memory" param from run_fill_buf()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These rework the Intel DTS IOSF and the ACPI thermal drivers to pass
tables of generic trip point structures to the core during
initialization and make some requisite modifications in the thermal
core, fix a few issues elsewhere and clean up code.
This includes changes that are present in the ACPI updates too,
because they involve both ACPI and the thermal core. The list of
specific changes below is limited to thermal control, however.
Specifics:
- Make the ACPI thermal driver use its own Notify() handler (Michal
Wilczynski)
- Rework the ACPI thermal driver to use a table of generic trip point
structures on top of the internal representation of trip points and
remove thermal zone callbacks that are not necessary any more from
that driver (Rafael Wysocki)
- Fix a few issues in the Intel DTS IOSF thermal driver, clean up
code in it and make it pass tables of generic trip point structures
to the core during thermal zone registration (Rafael Wysocki)
- Drop a redundant check from the Intel DTS IOSF thermal driver's
"remove" routine (Zhang Rui)
- Use module_platform_driver() to replace an open-coded counterpart
of it in the int340x thermal driver (Yang Yingliang)
- Fix possible uninitialized value access in __thermal_of_bind() and
__thermal_of_unbind() (Peng Fan)
- Make the int3400 driver use thermal zone device wrappers (Daniel
Lezcano)
- Remove redundant thermal zone state check from the int340x thermal
driver (Daniel Lezcano)
- Drop non-functional nocrt parameter from ACPI thermal (Mario
Limonciello)
- Explicitly include correct DT includes in the thermal core and
drivers (Rob Herring)"
* tag 'thermal-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: intel_soc_dts_iosf: Remove redundant check
thermal: intel: int340x: simplify the code with module_platform_driver()
thermal/of: Fix potential uninitialized value access
thermal: intel: intel_soc_dts_iosf: Use struct thermal_trip
thermal: intel: intel_soc_dts_iosf: Rework critical trip setup
thermal: intel: intel_soc_dts_iosf: Add helper for resetting trip points
thermal: intel: intel_soc_dts_iosf: Change initialization ordering
thermal: intel: intel_soc_dts_iosf: Pass sensors to update_trip_temp()
thermal: intel: intel_soc_dts_iosf: Untangle update_trip_temp()
thermal: intel: intel_soc_dts_iosf: Always assume notification support
thermal: intel: intel_soc_dts_iosf: Drop redundant symbol definition
thermal: intel: intel_soc_dts_iosf: Always use 2 trips
thermal: Explicitly include correct DT includes
thermal/drivers/int340x: Do not check the thermal zone state
thermal/drivers/int3400: Use thermal zone device wrappers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These rework cpuidle governors to call tick_nohz_get_sleep_length()
less often and fix one of them, rework hibernation to avoid storing
pages filled with zeros in hibernation images, switch over some
cpufreq drivers to use void remove callbacks, fix and clean up
multiple cpufreq drivers, fix the devfreq core, update the cpupower
utility and make other assorted improvements.
Specifics:
- Rework the menu and teo cpuidle governors to avoid calling
tick_nohz_get_sleep_length(), which is likely to become quite
expensive going forward, too often and improve making decisions
regarding whether or not to stop the scheduler tick in the teo
governor (Rafael Wysocki)
- Improve the performance of cpufreq_stats_create_table() in some
cases (Liao Chang)
- Fix two issues in the amd-pstate-ut cpufreq driver (Swapnil Sapkal)
- Use clamp() helper macro to improve the code readability in
cpufreq_verify_within_limits() (Liao Chang)
- Set stale CPU frequency to minimum in intel_pstate (Doug Smythies)
- Migrate cpufreq drivers for various platforms to use void remove
callback (Yangtao Li)
- Add online/offline/exit hooks for Tegra driver (Sumit Gupta)
- Explicitly include correct DT includes in cpufreq (Rob Herring)
- Frequency domain updates for qcom-hw driver (Neil Armstrong)
- Modify AMD pstate driver return the highest_perf value (Meng Li)
- Generic cleanups for cppc, mediatek and powernow driver (Liao
Chang, Konrad Dybcio)
- Add more platforms to cpufreq-arm driver's blocklist
(AngeloGioacchino Del Regno and Konrad Dybcio)
- brcmstb-avs-cpufreq: Fix -Warray-bounds bug (Gustavo A. R. Silva)
- Add device PM helpers to allow a device to remain powered-on during
system-wide transitions (Ulf Hansson)
- Rework hibernation memory snapshotting to avoid storing pages
filled with zeros in hibernation image files (Brian Geffon)
- Add check to make sure that CPU latency QoS constraints do not use
negative values (Clive Lin)
- Optimize rp->domains memory allocation in the Intel RAPL power
capping driver (xiongxin)
- Remove recursion while parsing zones in the arm_scmi power capping
driver (Cristian Marussi)
- Fix memory leak in devfreq_dev_release() (Boris Brezillon)
- Rewrite devfreq_monitor_start() kerneldoc comment (Manivannan
Sadhasivam)
- Explicitly include correct DT includes in devfreq (Rob Herring)
- Remove unsued pm_runtime_update_max_time_suspended() extern
declaration (YueHaibing)
- Add turbo-boost support to cpupower (Wyes Karny)
- Add support for amd_pstate mode change to cpupower (Wyes Karny)
- Fix 'cpupower idle_set' command to accept only numeric values of
arguments (Likhitha Korrapati)
- Clean up OPP code and add new frequency related APIs to it (Viresh
Kumar, Manivannan Sadhasivam)
- Convert ti cpufreq/opp bindings to json schema (Nishanth Menon)"
* tag 'pm-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
cpufreq: tegra194: remove opp table in exit hook
cpufreq: powernow-k8: Use related_cpus instead of cpus in driver.exit()
cpufreq: tegra194: add online/offline hooks
cpuidle: teo: Avoid unnecessary variable assignments
cpufreq: qcom-cpufreq-hw: add support for 4 freq domains
dt-bindings: cpufreq: qcom-hw: add a 4th frequency domain
cpufreq: amd-pstate-ut: Fix kernel panic when loading the driver
cpufreq: amd-pstate-ut: Remove module parameter access
cpufreq: Use clamp() helper macro to improve the code readability
PM: sleep: Add helpers to allow a device to remain powered-on
PM: QoS: Add check to make sure CPU latency is non-negative
PM: runtime: Remove unsued extern declaration of pm_runtime_update_max_time_suspended()
cpufreq: intel_pstate: set stale CPU frequency to minimum
cpufreq: stats: Improve the performance of cpufreq_stats_create_table()
dt-bindings: cpufreq: Convert ti-cpufreq to json schema
dt-bindings: opp: Convert ti-omap5-opp-supply to json schema
OPP: Fix argument name in doc comment
cpuidle: menu: Skip tick_nohz_get_sleep_length() call in some cases
cpufreq: cppc: Set fie_disabled to FIE_DISABLED if fails to create kworker_fie
cpufreq: cppc: cppc_cpufreq_get_rate() returns zero in all error cases.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These include new ACPICA material, a rework of the ACPI thermal
driver, a switch-over of the ACPI processor driver to using _OSC
instead of (long deprecated) _PDC for CPU initialization, a rework of
firmware notifications handling in several drivers, fixes and cleanups
for suspend-to-idle handling on AMD systems, ACPI backlight driver
updates and more.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20230628
including the following changes:
- Suppress a GCC 12 dangling-pointer warning (Philip Prindeville)
- Reformat the ACPI_STATE_COMMON macro and its users (George Guo)
- Replace the ternary operator with ACPI_MIN() (Jiangshan Yi)
- Add support for _DSC as per ACPI 6.5 (Saket Dumbre)
- Remove a duplicate macro from zephyr header (Najumon B.A)
- Add data structures for GED and _EVT tracking (Jose Marinho)
- Fix misspelled CDAT DSMAS define (Dave Jiang)
- Simplify an error message in acpi_ds_result_push() (Christophe
Jaillet)
- Add a struct size macro related to SRAT (Dave Jiang)
- Add AML_NO_OPERAND_RESOLVE flag to Timer (Abhishek Mainkar)
- Add support for RISC-V external interrupt controllers in MADT
(Sunil V L)
- Add RHCT flags, CMO and MMU nodes (Sunil V L)
- Change ACPICA version to 20230628 (Bob Moore)
- Introduce new wrappers for ACPICA notify handler install/remove and
convert multiple drivers to using their own Notify() handlers
instead of the ACPI bus type .notify() slated for removal (Michal
Wilczynski)
- Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2
(Hans de Goede)
- Put ACPI video and its child devices explicitly into D0 on boot to
avoid platform firmware confusion (Kai-Heng Feng)
- Add backlight=native DMI quirk for Lenovo Ideapad Z470 (Jiri Slaby)
- Support obtaining physical CPU ID from MADT on LoongArch (Bibo Mao)
- Convert ACPI CPU initialization to using _OSC instead of _PDC that
has been depreceted since 2018 and dropped from the specification
in ACPI 6.5 (Michal Wilczynski, Rafael Wysocki)
- Drop non-functional nocrt parameter from ACPI thermal (Mario
Limonciello)
- Clean up the ACPI thermal driver, rework the handling of firmware
notifications in it and make it provide a table of generic trip
point structures to the core during initialization (Rafael Wysocki)
- Defer enumeration of devices with _DEP pointing to IVSC (Wentong
Wu)
- Install SystemCMOS address space handler for ACPI000E (TAD) to meet
platform firmware expectations on some platforms (Zhang Rui)
- Fix finding the generic error data in the ACPi extlog driver for
compatibility with old and new firmware interface versions
(Xiaochun Lee)
- Remove assorted unused declarations of functions (Yue Haibing)
- Move AMBA bus scan handling into arm64 specific directory (Sudeep
Holla)
- Fix and clean up suspend-to-idle interface for AMD systems (Mario
Limonciello, Andy Shevchenko)
- Fix string truncation warning in pnpacpi_add_device() (Sunil V L)"
* tag 'acpi-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (66 commits)
ACPI: x86: s2idle: Add a function to get LPS0 constraint for a device
ACPI: x86: s2idle: Add for_each_lpi_constraint() helper
ACPI: x86: s2idle: Add more debugging for AMD constraints parsing
ACPI: x86: s2idle: Fix a logic error parsing AMD constraints table
ACPI: x86: s2idle: Catch multiple ACPI_TYPE_PACKAGE objects
ACPI: x86: s2idle: Post-increment variables when getting constraints
ACPI: Adjust #ifdef for *_lps0_dev use
ACPI: TAD: Install SystemCMOS address space handler for ACPI000E
ACPI: Remove assorted unused declarations of functions
ACPI: extlog: Fix finding the generic error data for v3 structure
PNP: ACPI: Fix string truncation warning
ACPI: Remove unused extern declaration acpi_paddr_to_node()
ACPI: video: Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2
ACPI: video: Put ACPI video and its child devices into D0 on boot
ACPI: processor: LoongArch: Get physical ID from MADT
ACPI: scan: Defer enumeration of devices with a _DEP pointing to IVSC device
ACPI: thermal: Eliminate code duplication from acpi_thermal_notify()
ACPI: thermal: Drop unnecessary thermal zone callbacks
ACPI: thermal: Rework thermal_get_trend()
ACPI: thermal: Use trip point table to register thermal zones
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform firmware update from Tzung-Bi Shih:
- Add MAINTAINERS entry for chrome platform firmware
* tag 'tag-chrome-platform-firmware-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
MAINTAINERS: Add drivers/firmware/google/ entry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"Improvements:
- Remove shutdown timeout on EC panic for offering the filesystem a
chance to sync
- Support official HID "GOOG0016" for ChromeOS ACPI
Fixes:
- Print hex string instead of using "%s" for ACPI_TYPE_BUFFER
Misc:
- Update MAINTAINERS"
* tag 'tag-chrome-platform-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: chromeos_acpi: print hex string for ACPI_TYPE_BUFFER
platform/chrome: chromeos_acpi: support official HID GOOG0016
platform/chrome: cros_ec_lpc: Remove EC panic shutdown timeout
MAINTAINERS: update maintainers of chrome-platform
|
