| Age | Commit message (Collapse) | Author |
|---|
|
Update MAINTAINERS entries with a valid email address as the Microchip
one is no longer valid.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Acked-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20230804050007.235799-1-claudiu.beznea@tuxon.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Andi reported (see link below) a regression when printing the
'duration_time' tool event, where it gets printed as "not counted" for
most of the CPUs, fix it by skipping zero counts for tool events.
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Claire Jensen <cjense@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/all/ZMlrzcVrVi1lTDmn@tassilo/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
- Fix a freeze consistency check in gfs2_trans_add_meta()
- Don't use filemap_splice_read as it can cause deadlocks on gfs2
* tag 'gfs2-v6.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Don't use filemap_splice_read
gfs2: Fix freeze consistency check in gfs2_trans_add_meta
|
|
To pick up the changes from these csets:
522b1d69219d8f08 ("x86/cpu/amd: Add a Zenbleed fix")
That cause no changes to tooling:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
$
Just silences this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZND17H7BI4ariERn@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This reverts commit 46d21ec067490ab9cdcc89b9de5aae28786a8b8e.
The tests were made with a specific workload, further tests on a
recently updated fedora 38 system with a system wide perf.data file
shows 'perf report' taking excessive time resolving inlines in vmlinux,
so lets revert this until a full investigation and improvement on the
addr2line support code is made.
Reported-by: Jesper Dangaard Brouer <hawk@kernel.org>
Acked-by: Artem Savkov <asavkov@redhat.com>
Tested-by: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/ZMl8VyhdwhClTM5g@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
AP_VLAN interfaces are virtual, so doesn't really exist as a type for
capabilities. When passed in as a type, AP is the one that's really intended.
Fixes: c4cbaf7973a7 ("cfg80211: Add support for HE")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230622165919.46841-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
RX full flags are raised if certain types of RX FIFO are full, and then
drop all following MPDU of AMPDU. In order to resume to receive MPDU
when RX FIFO becomes available, we clear the register bits by the
commit a0d99ebb3ecd ("wifi: rtw89: initialize DMA of CMAC"). But, 8852AE
needs more settings to support this. To quickly fix disconnection problem,
revert the behavior as before.
Fixes: a0d99ebb3ecd ("wifi: rtw89: initialize DMA of CMAC")
Reported-by: Damian B <bronecki.damian@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217710
Cc: <Stable@vger.kernel.org>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Damian B <bronecki.damian@gmail.com>
Link: https://lore.kernel.org/r/20230808005426.5327-1-pkshih@realtek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This entry is not needed. Remove it.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20230804222438.16076-3-Larry.Finger@lwfinger.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
As Herton Ronaldo Krzesinski is no longer active, remove him as maintainer
for rtl8187.
The git tree entry is also removed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20230804222438.16076-2-Larry.Finger@lwfinger.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Return -ENOMEM from brcmf_run_escan() if kzalloc() fails for v1 params.
Fixes: 398ce273d6b1 ("wifi: brcmfmac: cfg80211: Add support for scan params v2")
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Link: https://lore.kernel.org/r/20230802163430.1656-1-petrtesarik@huaweicloud.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Fix handling IPv4 routes referencing a nexthop via its id by replacing
calls to fib_info_nh() with fib_info_nhc().
Trying to add an IPv4 route referencing a nextop via nhid:
$ ip link set up swp5
$ ip a a 10.0.0.1/24 dev swp5
$ ip nexthop add dev swp5 id 20 via 10.0.0.2
$ ip route add 10.0.1.0/24 nhid 20
triggers warnings when trying to handle the route:
[ 528.805763] ------------[ cut here ]------------
[ 528.810437] WARNING: CPU: 3 PID: 53 at include/net/nexthop.h:468 __prestera_fi_is_direct+0x2c/0x68 [prestera]
[ 528.820434] Modules linked in: prestera_pci act_gact act_police sch_ingress cls_u32 cls_flower prestera arm64_delta_tn48m_dn_led(O) arm64_delta_tn48m_dn_cpld(O) [last unloaded: prestera_pci]
[ 528.837485] CPU: 3 PID: 53 Comm: kworker/u8:3 Tainted: G O 6.4.5 #1
[ 528.845178] Hardware name: delta,tn48m-dn (DT)
[ 528.849641] Workqueue: prestera_ordered __prestera_router_fib_event_work [prestera]
[ 528.857352] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 528.864347] pc : __prestera_fi_is_direct+0x2c/0x68 [prestera]
[ 528.870135] lr : prestera_k_arb_fib_evt+0xb20/0xd50 [prestera]
[ 528.876007] sp : ffff80000b20bc90
[ 528.879336] x29: ffff80000b20bc90 x28: 0000000000000000 x27: ffff0001374d3a48
[ 528.886510] x26: ffff000105604000 x25: ffff000134af8a28 x24: ffff0001374d3800
[ 528.893683] x23: ffff000101c89148 x22: ffff000101c89000 x21: ffff000101c89200
[ 528.900855] x20: ffff00013641fda0 x19: ffff800009d01088 x18: 0000000000000059
[ 528.908027] x17: 0000000000000277 x16: 0000000000000000 x15: 0000000000000000
[ 528.915198] x14: 0000000000000003 x13: 00000000000fe400 x12: 0000000000000000
[ 528.922371] x11: 0000000000000002 x10: 0000000000000aa0 x9 : ffff8000013d2020
[ 528.929543] x8 : 0000000000000018 x7 : 000000007b1703f8 x6 : 000000001ca72f86
[ 528.936715] x5 : 0000000033399ea7 x4 : 0000000000000000 x3 : ffff0001374d3acc
[ 528.943886] x2 : 0000000000000000 x1 : ffff00010200de00 x0 : ffff000134ae3f80
[ 528.951058] Call trace:
[ 528.953516] __prestera_fi_is_direct+0x2c/0x68 [prestera]
[ 528.958952] __prestera_router_fib_event_work+0x100/0x158 [prestera]
[ 528.965348] process_one_work+0x208/0x488
[ 528.969387] worker_thread+0x4c/0x430
[ 528.973068] kthread+0x120/0x138
[ 528.976313] ret_from_fork+0x10/0x20
[ 528.979909] ---[ end trace 0000000000000000 ]---
[ 528.984998] ------------[ cut here ]------------
[ 528.989645] WARNING: CPU: 3 PID: 53 at include/net/nexthop.h:468 __prestera_fi_is_direct+0x2c/0x68 [prestera]
[ 528.999628] Modules linked in: prestera_pci act_gact act_police sch_ingress cls_u32 cls_flower prestera arm64_delta_tn48m_dn_led(O) arm64_delta_tn48m_dn_cpld(O) [last unloaded: prestera_pci]
[ 529.016676] CPU: 3 PID: 53 Comm: kworker/u8:3 Tainted: G W O 6.4.5 #1
[ 529.024368] Hardware name: delta,tn48m-dn (DT)
[ 529.028830] Workqueue: prestera_ordered __prestera_router_fib_event_work [prestera]
[ 529.036539] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 529.043533] pc : __prestera_fi_is_direct+0x2c/0x68 [prestera]
[ 529.049318] lr : __prestera_k_arb_fc_apply+0x280/0x2f8 [prestera]
[ 529.055452] sp : ffff80000b20bc60
[ 529.058781] x29: ffff80000b20bc60 x28: 0000000000000000 x27: ffff0001374d3a48
[ 529.065953] x26: ffff000105604000 x25: ffff000134af8a28 x24: ffff0001374d3800
[ 529.073126] x23: ffff000101c89148 x22: ffff000101c89148 x21: ffff00013641fda0
[ 529.080299] x20: ffff000101c89000 x19: ffff000101c89020 x18: 0000000000000059
[ 529.087471] x17: 0000000000000277 x16: 0000000000000000 x15: 0000000000000000
[ 529.094642] x14: 0000000000000003 x13: 00000000000fe400 x12: 0000000000000000
[ 529.101814] x11: 0000000000000002 x10: 0000000000000aa0 x9 : ffff8000013cee80
[ 529.108985] x8 : 0000000000000018 x7 : 000000007b1703f8 x6 : 0000000000000018
[ 529.116157] x5 : 00000000d3497eb6 x4 : ffff000105604081 x3 : 000000008e979557
[ 529.123329] x2 : 0000000000000000 x1 : ffff00010200de00 x0 : ffff000134ae3f80
[ 529.130501] Call trace:
[ 529.132958] __prestera_fi_is_direct+0x2c/0x68 [prestera]
[ 529.138394] prestera_k_arb_fib_evt+0x6b8/0xd50 [prestera]
[ 529.143918] __prestera_router_fib_event_work+0x100/0x158 [prestera]
[ 529.150313] process_one_work+0x208/0x488
[ 529.154348] worker_thread+0x4c/0x430
[ 529.158030] kthread+0x120/0x138
[ 529.161274] ret_from_fork+0x10/0x20
[ 529.164867] ---[ end trace 0000000000000000 ]---
and results in a non offloaded route:
$ ip route
10.0.0.0/24 dev swp5 proto kernel scope link src 10.0.0.1 rt_trap
10.0.1.0/24 nhid 20 via 10.0.0.2 dev swp5 rt_trap
When creating a route referencing a nexthop via its ID, the nexthop will
be stored in a separate nh pointer instead of the array of nexthops in
the fib_info struct. This causes issues since fib_info_nh() only handles
the nexthops array, but not the separate nh pointer, and will loudly
WARN about it.
In contrast fib_info_nhc() handles both, but returns a fib_nh_common
pointer instead of a fib_nh pointer. Luckily we only ever access fields
from the fib_nh_common parts, so we can just replace all instances of
fib_info_nh() with fib_info_nhc() and access the fields via their
fib_nh_common names.
This allows handling IPv4 routes with an external nexthop, and they now
get offloaded as expected:
$ ip route
10.0.0.0/24 dev swp5 proto kernel scope link src 10.0.0.1 rt_trap
10.0.1.0/24 nhid 20 via 10.0.0.2 dev swp5 offload rt_offload
Fixes: 396b80cb5cc8 ("net: marvell: prestera: Add neighbour cache accounting")
Signed-off-by: Jonas Gorski <jonas.gorski@bisdn.de>
Acked-by: Elad Nachman <enachman@marvell.com>
Link: https://lore.kernel.org/r/20230804101220.247515-1-jonas.gorski@bisdn.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzkaller reported the following issue:
=======================================
Too BIG xdp->frame_sz = 131072
WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121
____bpf_xdp_adjust_tail net/core/filter.c:4121 [inline]
WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121
bpf_xdp_adjust_tail+0x466/0xa10 net/core/filter.c:4103
...
Call Trace:
<TASK>
bpf_prog_4add87e5301a4105+0x1a/0x1c
__bpf_prog_run include/linux/filter.h:600 [inline]
bpf_prog_run_xdp include/linux/filter.h:775 [inline]
bpf_prog_run_generic_xdp+0x57e/0x11e0 net/core/dev.c:4721
netif_receive_generic_xdp net/core/dev.c:4807 [inline]
do_xdp_generic+0x35c/0x770 net/core/dev.c:4866
tun_get_user+0x2340/0x3ca0 drivers/net/tun.c:1919
tun_chr_write_iter+0xe8/0x210 drivers/net/tun.c:2043
call_write_iter include/linux/fs.h:1871 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x650/0xe40 fs/read_write.c:584
ksys_write+0x12f/0x250 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
xdp->frame_sz > PAGE_SIZE check was introduced in commit c8741e2bfe87
("xdp: Allow bpf_xdp_adjust_tail() to grow packet size"). But Jesper
Dangaard Brouer <jbrouer@redhat.com> noted that after introducing the
xdp_init_buff() which all XDP driver use - it's safe to remove this
check. The original intend was to catch cases where XDP drivers have
not been updated to use xdp.frame_sz, but that is not longer a concern
(since xdp_init_buff).
Running the initial syzkaller repro it was discovered that the
contiguous physical memory allocation is used for both xdp paths in
tun_get_user(), e.g. tun_build_skb() and tun_alloc_skb(). It was also
stated by Jesper Dangaard Brouer <jbrouer@redhat.com> that XDP can
work on higher order pages, as long as this is contiguous physical
memory (e.g. a page).
Reported-and-tested-by: syzbot+f817490f5bd20541b90a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000774b9205f1d8a80d@google.com/T/
Link: https://syzkaller.appspot.com/bug?extid=f817490f5bd20541b90a
Link: https://lore.kernel.org/all/20230725155403.796-1-andrew.kanner@gmail.com/T/
Fixes: 43b5169d8355 ("net, xdp: Introduce xdp_init_buff utility routine")
Signed-off-by: Andrew Kanner <andrew.kanner@gmail.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20230803190316.2380231-1-andrew.kanner@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using the syzkaller repro with reduced packet size it was discovered
that XDP_PACKET_HEADROOM is not checked in tun_can_build_skb(),
although pad may be incremented in tun_build_skb(). This may end up
with exceeding the PAGE_SIZE limit in tun_build_skb().
Jason Wang <jasowang@redhat.com> proposed to count XDP_PACKET_HEADROOM
always (e.g. without rcu_access_pointer(tun->xdp_prog)) in
tun_can_build_skb() since there's a window during which XDP program
might be attached between tun_can_build_skb() and tun_build_skb().
Fixes: 7df13219d757 ("tun: reserve extra headroom only when XDP is set")
Link: https://syzkaller.appspot.com/bug?extid=f817490f5bd20541b90a
Signed-off-by: Andrew Kanner <andrew.kanner@gmail.com>
Link: https://lore.kernel.org/r/20230803185947.2379988-1-andrew.kanner@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen netback buffer overflow fix from Juergen Gross:
"The fix for XSA-423 added logic to Linux'es netback driver to deal
with a frontend splitting a packet in a way such that not all of the
headers would come in one piece.
Unfortunately the logic introduced there didn't account for the
extreme case of the entire packet being split into as many pieces as
permitted by the protocol, yet still being smaller than the area
that's specially dealt with to keep all (possible) headers together.
Such an unusual packet would therefore trigger a buffer overrun in the
driver"
* tag 'xsa432-6.5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/netback: Fix buffer overrun triggered by unusual packet
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/gds fixes from Dave Hansen:
"Mitigate Gather Data Sampling issue:
- Add Base GDS mitigation
- Support GDS_NO under KVM
- Fix a documentation typo"
* tag 'gds-for-linus-2023-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/x86: Fix backwards on/off logic about YMM support
KVM: Add GDS_NO support to KVM
x86/speculation: Add Kconfig option for GDS
x86/speculation: Add force option to GDS mitigation
x86/speculation: Add Gather Data Sampling mitigation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/srso fixes from Borislav Petkov:
"Add a mitigation for the speculative RAS (Return Address Stack)
overflow vulnerability on AMD processors.
In short, this is yet another issue where userspace poisons a
microarchitectural structure which can then be used to leak privileged
information through a side channel"
* tag 'x86_bugs_srso' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/srso: Tie SBPB bit setting to microcode patch detection
x86/srso: Add a forgotten NOENDBR annotation
x86/srso: Fix return thunks in generated code
x86/srso: Add IBPB on VMEXIT
x86/srso: Add IBPB
x86/srso: Add SRSO_NO support
x86/srso: Add IBPB_BRTYPE support
x86/srso: Add a Speculative RAS Overflow mitigation
x86/bugs: Increase the x86 bugs vector size to two u32s
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
- The recently added cpu_intensive auto detection and warning mechanism
was spuriously triggered on slow CPUs.
While not causing serious issues, it's still a nuisance and can cause
unintended concurrency management behaviors.
Relax the threshold on machines with lower BogoMIPS. While BogoMIPS
is not an accurate measure of performance by most measures, we don't
have to be accurate and it has rough but strong enough correlation.
- A correction in Kconfig help text
* tag 'wq-for-6.5-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Scale up wq_cpu_intensive_thresh_us if BogoMIPS is below 4000
workqueue: Fix cpu_intensive_thresh_us name in help text
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"A few more bug fixes"
* tag 'tpmdd-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm/tpm_tis: Disable interrupts for Lenovo P620 devices
tpm: Disable RNG for all AMD fTPMs
sysctl: set variable key_sysctls storage-class-specifier to static
tpm/tpm_tis: Disable interrupts for TUXEDO InfinityBook S 15/17 Gen7
|
|
Jason A. Donenfeld says:
====================
wireguard fixes for 6.5-rc6
Just one patch this time, somewhat late in the cycle:
1) Fix an off-by-one calculation for the maximum node depth size in the
allowedips trie data structure, and also adjust the self-tests to hit
this case so it doesn't regress again in the future.
====================
Link: https://lore.kernel.org/r/20230807132146.2191597-1-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the allowedips self-test, nodes are inserted into the tree, but it
generated an even amount of nodes, but for checking maximum node depth,
there is of course the root node, which makes the total number
necessarily odd. With two few nodes added, it never triggered the
maximum depth check like it should have. So, add 129 nodes instead of
128 nodes, and do so with a more straightforward scheme, starting with
all the bits set, and shifting over one each time. Then increase the
maximum depth to 129, and choose a better name for that variable to
make it clear that it represents depth as opposed to bits.
Cc: stable@vger.kernel.org
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20230807132146.2191597-2-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BUG_ON(!vlan_info) is triggered in unregister_vlan_dev() with
following testcase:
# ip netns add ns1
# ip netns exec ns1 ip link add bond0 type bond mode 0
# ip netns exec ns1 ip link add bond_slave_1 type veth peer veth2
# ip netns exec ns1 ip link set bond_slave_1 master bond0
# ip netns exec ns1 ip link add link bond_slave_1 name vlan10 type vlan id 10 protocol 802.1ad
# ip netns exec ns1 ip link add link bond0 name bond0_vlan10 type vlan id 10 protocol 802.1ad
# ip netns exec ns1 ip link set bond_slave_1 nomaster
# ip netns del ns1
The logical analysis of the problem is as follows:
1. create ETH_P_8021AD protocol vlan10 for bond_slave_1:
register_vlan_dev()
vlan_vid_add()
vlan_info_alloc()
__vlan_vid_add() // add [ETH_P_8021AD, 10] vid to bond_slave_1
2. create ETH_P_8021AD protocol bond0_vlan10 for bond0:
register_vlan_dev()
vlan_vid_add()
__vlan_vid_add()
vlan_add_rx_filter_info()
if (!vlan_hw_filter_capable(dev, proto)) // condition established because bond0 without NETIF_F_HW_VLAN_STAG_FILTER
return 0;
if (netif_device_present(dev))
return dev->netdev_ops->ndo_vlan_rx_add_vid(dev, proto, vid); // will be never called
// The slaves of bond0 will not refer to the [ETH_P_8021AD, 10] vid.
3. detach bond_slave_1 from bond0:
__bond_release_one()
vlan_vids_del_by_dev()
list_for_each_entry(vid_info, &vlan_info->vid_list, list)
vlan_vid_del(dev, vid_info->proto, vid_info->vid);
// bond_slave_1 [ETH_P_8021AD, 10] vid will be deleted.
// bond_slave_1->vlan_info will be assigned NULL.
4. delete vlan10 during delete ns1:
default_device_exit_batch()
dev->rtnl_link_ops->dellink() // unregister_vlan_dev() for vlan10
vlan_info = rtnl_dereference(real_dev->vlan_info); // real_dev of vlan10 is bond_slave_1
BUG_ON(!vlan_info); // bond_slave_1->vlan_info is NULL now, bug is triggered!!!
Add S-VLAN tag related features support to bond driver. So the bond driver
will always propagate the VLAN info to its slaves.
Fixes: 8ad227ff89a7 ("net: vlan: add 802.1ad support")
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230802114320.4156068-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add missing capability check for each of the vnic counters exposed by
devlink health reporter, and thus avoid unexpected behavior due to
invalid access to registers.
While at it, read only the exact number of bits for each counter whether
it was 32 bits or 64 bits.
Fixes: b0bc615df488 ("net/mlx5: Add vnic devlink health reporter to PFs/VFs")
Fixes: a33682e4e78e ("net/mlx5e: Expose catastrophic steering error counters")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Handling pci errors should fully teardown and load back auxiliary
devices, same as done through mlx5 health recovery flow.
Fixes: 72ed5d5624af ("net/mlx5: Suspend auxiliary devices only in case of PCI device suspend")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When device is in error state, marked by the flag
MLX5_DEVICE_STATE_INTERNAL_ERROR, the HW and PCI may not be accessible
and so clock update work should be skipped. Furthermore, such access
through PCI in error state, after calling mlx5_pci_disable_device() can
result in failing to recover from pci errors.
Fixes: ef9814deafd0 ("net/mlx5e: Add HW timestamping (TS) support")
Reported-and-tested-by: Ganesh G R <ganeshgr@linux.ibm.com>
Closes: https://lore.kernel.org/netdev/9bdb9b9d-140a-7a28-f0de-2e64e873c068@nvidia.com
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Cited patch introduced buckets in hash mode, but missed to update
the ports/bucket check when modifying LAG.
Fix the check.
Fixes: 352899f384d4 ("net/mlx5: Lag, use buckets in hash mode")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
If having the following tc rule on stack device:
filter parent ffff: protocol ip pref 3 flower chain 1
filter parent ffff: protocol ip pref 3 flower chain 1 handle 0x1
dst_mac 24:25:d0:e1:00:00
src_mac 02:25:d0:25:01:02
eth_type ipv4
ct_state +trk+new
in_hw in_hw_count 1
action order 1: ct commit zone 0 pipe
index 2 ref 1 bind 1 installed 3807 sec used 3779 sec firstused 3800 sec
Action statistics:
Sent 120 bytes 2 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
used_hw_stats delayed
action order 2: tunnel_key set
src_ip 192.168.1.25
dst_ip 192.168.1.26
key_id 4
dst_port 4789
csum pipe
index 3 ref 1 bind 1 installed 3807 sec used 3779 sec firstused 3800 sec
Action statistics:
Sent 120 bytes 2 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
used_hw_stats delayed
action order 3: mirred (Egress Redirect to device vxlan1) stolen
index 9 ref 1 bind 1 installed 3807 sec used 3779 sec firstused 3800 sec
Action statistics:
Sent 120 bytes 2 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
used_hw_stats delayed
When handling FIB events, the rule in post act will not be deleted.
And because the post act rule has packet reformat and modify header
actions, also will hit the following syndromes:
mlx5_core 0000:08:00.0: mlx5_cmd_out_err:829:(pid 11613): DEALLOC_MODIFY_HEADER_CONTEXT(0x941) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x1ab444), err(-22)
mlx5_core 0000:08:00.0: mlx5_cmd_out_err:829:(pid 11613): DEALLOC_PACKET_REFORMAT_CONTEXT(0x93e) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x179e84), err(-22)
Fix it by unoffloading post act rule when handling FIB events.
Fixes: 314e1105831b ("net/mlx5e: Add post act offload/unoffload API")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The controller number for ECVFs is always 0, because the ECPF must be
the eswitch owner for EC VFs to be enabled.
Fixes: dc13180824b7 ("net/mlx5: Enable devlink port for embedded cpu VF vports")
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When querying eswitch functions 0 is a valid number of host VFs. After
introducing ARM SRIOV falling through to getting the max value from PCI
results in using the total VFs allowed on the ARM for the host.
Fixes: 86eec50beaf3 ("net/mlx5: Support querying max VFs from device");
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The ECVF function ID range is 1..max_ec_vfs. Currently
mlx5_vport_to_func_id returns 0..max_ec_vfs - 1. Which
results in a syndrome when querying the caps with more
recent firmware, or reading incorrect caps with older
firmware that supports EC VFs.
Fixes: 9ac0b128248e ("net/mlx5: Update vport caps query/set for EC VFs")
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Fixing wrong calculation of the modify hdr pattern size,
where the previously calculated number would not be enough
to accommodate the required number of actions.
Fixes: da5d0027d666 ("net/mlx5: DR, Add cache for modify header pattern")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The flow rule can be splited, and the extra post_act rules are added
to post_act table. It's possible to trigger memleak when the rule
forwards packets from internal port and over tunnel, in the case that,
for example, CT 'new' state offload is allowed. As int_port object is
assigned to the flow attribute of post_act rule, and its refcnt is
incremented by mlx5e_tc_int_port_get(), but mlx5e_tc_int_port_put() is
not called, the refcnt is never decremented, then int_port is never
freed.
The kmemleak reports the following error:
unreferenced object 0xffff888128204b80 (size 64):
comm "handler20", pid 50121, jiffies 4296973009 (age 642.932s)
hex dump (first 32 bytes):
01 00 00 00 19 00 00 00 03 f0 00 00 04 00 00 00 ................
98 77 67 41 81 88 ff ff 98 77 67 41 81 88 ff ff .wgA.....wgA....
backtrace:
[<00000000e992680d>] kmalloc_trace+0x27/0x120
[<000000009e945a98>] mlx5e_tc_int_port_get+0x3f3/0xe20 [mlx5_core]
[<0000000035a537f0>] mlx5e_tc_add_fdb_flow+0x473/0xcf0 [mlx5_core]
[<0000000070c2cec6>] __mlx5e_add_fdb_flow+0x7cf/0xe90 [mlx5_core]
[<000000005cc84048>] mlx5e_configure_flower+0xd40/0x4c40 [mlx5_core]
[<000000004f8a2031>] mlx5e_rep_indr_offload.isra.0+0x10e/0x1c0 [mlx5_core]
[<000000007df797dc>] mlx5e_rep_indr_setup_tc_cb+0x90/0x130 [mlx5_core]
[<0000000016c15cc3>] tc_setup_cb_add+0x1cf/0x410
[<00000000a63305b4>] fl_hw_replace_filter+0x38f/0x670 [cls_flower]
[<000000008bc9e77c>] fl_change+0x1fd5/0x4430 [cls_flower]
[<00000000e7f766e4>] tc_new_tfilter+0x867/0x2010
[<00000000e101c0ef>] rtnetlink_rcv_msg+0x6fc/0x9f0
[<00000000e1111d44>] netlink_rcv_skb+0x12c/0x360
[<0000000082dd6c8b>] netlink_unicast+0x438/0x710
[<00000000fc568f70>] netlink_sendmsg+0x794/0xc50
[<0000000016e92590>] sock_sendmsg+0xc5/0x190
So fix this by moving int_port cleanup code to the flow attribute
free helper, which is used by all the attribute free cases.
Fixes: 8300f225268b ("net/mlx5e: Create new flow attr for multi table actions")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Hold RTNL lock when calling xdp_set_features() with a registered netdev,
as the call triggers the netdev notifiers. This could happen when
switching from uplink rep to nic profile for example.
This resolves the following call trace:
RTNL: assertion failed at net/core/dev.c (1953)
WARNING: CPU: 6 PID: 112670 at net/core/dev.c:1953 call_netdevice_notifiers_info+0x7c/0x80
Modules linked in: sch_mqprio sch_mqprio_lib act_tunnel_key act_mirred act_skbedit cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress bonding ib_umad ip_gre rdma_ucm mlx5_vfio_pci ipip tunnel4 ip6_gre gre mlx5_ib vfio_pci vfio_pci_core vfio_iommu_type1 ib_uverbs vfio mlx5_core ib_ipoib geneve nf_tables ip6_tunnel tunnel6 iptable_raw openvswitch nsh rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay zram zsmalloc fuse [last unloaded: ib_uverbs]
CPU: 6 PID: 112670 Comm: devlink Not tainted 6.4.0-rc7_for_upstream_min_debug_2023_06_28_17_02 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:call_netdevice_notifiers_info+0x7c/0x80
Code: 90 ff 80 3d 2d 6b f7 00 00 75 c5 ba a1 07 00 00 48 c7 c6 e4 ce 0b 82 48 c7 c7 c8 f4 04 82 c6 05 11 6b f7 00 01 e8 a4 7c 8e ff <0f> 0b eb a2 0f 1f 44 00 00 55 48 89 e5 41 54 48 83 e4 f0 48 83 ec
RSP: 0018:ffff8882a21c3948 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffffff82e6f880 RCX: 0000000000000027
RDX: ffff88885f99b5c8 RSI: 0000000000000001 RDI: ffff88885f99b5c0
RBP: 0000000000000028 R08: ffff88887ffabaa8 R09: 0000000000000003
R10: ffff88887fecbac0 R11: ffff88887ff7bac0 R12: ffff8882a21c3968
R13: ffff88811c018940 R14: 0000000000000000 R15: ffff8881274401a0
FS: 00007fe141c81800(0000) GS:ffff88885f980000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f787c28b948 CR3: 000000014bcf3005 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __warn+0x79/0x120
? call_netdevice_notifiers_info+0x7c/0x80
? report_bug+0x17c/0x190
? handle_bug+0x3c/0x60
? exc_invalid_op+0x14/0x70
? asm_exc_invalid_op+0x16/0x20
? call_netdevice_notifiers_info+0x7c/0x80
? call_netdevice_notifiers_info+0x7c/0x80
call_netdevice_notifiers+0x2e/0x50
mlx5e_set_xdp_feature+0x21/0x50 [mlx5_core]
mlx5e_nic_init+0xf1/0x1a0 [mlx5_core]
mlx5e_netdev_init_profile+0x76/0x110 [mlx5_core]
mlx5e_netdev_attach_profile+0x1f/0x90 [mlx5_core]
mlx5e_netdev_change_profile+0x92/0x160 [mlx5_core]
mlx5e_netdev_attach_nic_profile+0x1b/0x30 [mlx5_core]
mlx5e_vport_rep_unload+0xaa/0xc0 [mlx5_core]
__esw_offloads_unload_rep+0x52/0x60 [mlx5_core]
mlx5_esw_offloads_rep_unload+0x52/0x70 [mlx5_core]
esw_offloads_unload_rep+0x34/0x70 [mlx5_core]
esw_offloads_disable+0x2b/0x90 [mlx5_core]
mlx5_eswitch_disable_locked+0x1b9/0x210 [mlx5_core]
mlx5_devlink_eswitch_mode_set+0xf5/0x630 [mlx5_core]
? devlink_get_from_attrs_lock+0x9e/0x110
devlink_nl_cmd_eswitch_set_doit+0x60/0xe0
genl_family_rcv_msg_doit.isra.0+0xc2/0x110
genl_rcv_msg+0x17d/0x2b0
? devlink_get_from_attrs_lock+0x110/0x110
? devlink_nl_cmd_eswitch_get_doit+0x290/0x290
? devlink_pernet_pre_exit+0xf0/0xf0
? genl_family_rcv_msg_doit.isra.0+0x110/0x110
netlink_rcv_skb+0x54/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x1f6/0x2c0
netlink_sendmsg+0x232/0x4a0
sock_sendmsg+0x38/0x60
? _copy_from_user+0x2a/0x60
__sys_sendto+0x110/0x160
? __count_memcg_events+0x48/0x90
? handle_mm_fault+0x161/0x260
? do_user_addr_fault+0x278/0x6e0
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fe141b1340a
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
RSP: 002b:00007fff61d03de8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000afab00 RCX: 00007fe141b1340a
RDX: 0000000000000038 RSI: 0000000000afab00 RDI: 0000000000000003
RBP: 0000000000afa910 R08: 00007fe141d80200 R09: 000000000000000c
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001
</TASK>
Fixes: 4d5ab0ad964d ("net/mlx5e: take into account device reconfiguration for xdp_features flag")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The Lenovo ThinkStation P620 suffers from an irq storm issue like various
other Lenovo machines, so add an entry for it to tpm_tis_dmi_table and
force polling.
It is worth noting that 481c2d14627d (tpm,tpm_tis: Disable interrupts after
1000 unhandled IRQs) does not seem to fix the problem on this machine, but
setting 'tpm_tis.interrupts=0' on the kernel command line does.
[jarkko@kernel.org: truncated the commit ID in the description to 12
characters]
Cc: stable@vger.kernel.org # v6.4+
Fixes: e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test")
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The TPM RNG functionality is not necessary for entropy when the CPU
already supports the RDRAND instruction. The TPM RNG functionality
was previously disabled on a subset of AMD fTPM series, but reports
continue to show problems on some systems causing stutter root caused
to TPM RNG functionality.
Expand disabling TPM RNG use for all AMD fTPMs whether they have versions
that claim to have fixed or not. To accomplish this, move the detection
into part of the TPM CRB registration and add a flag indicating that
the TPM should opt-out of registration to hwrng.
Cc: stable@vger.kernel.org # 6.1.y+
Fixes: b006c439d58d ("hwrng: core - start hwrng kthread also for untrusted sources")
Fixes: f1324bbc4011 ("tpm: disable hwrng for fTPM on some AMD designs")
Reported-by: daniil.stas@posteo.net
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217719
Reported-by: bitlord0xff@gmail.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217212
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
smatch reports
security/keys/sysctl.c:12:18: warning: symbol
'key_sysctls' was not declared. Should it be static?
This variable is only used in its defining file, so it should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
TUXEDO InfinityBook S 15/17 Gen7 suffers from an IRQ problem on
tpm_tis like a few other laptops. Add an entry for the workaround.
Cc: stable@vger.kernel.org
Fixes: e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1213645
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"x86:
- Fix SEV race condition
ARM:
- Fixes for the configuration of SVE/SME traps when hVHE mode is in
use
- Allow use of pKVM on systems with FF-A implementations that are
v1.0 compatible
- Request/release percpu IRQs (arch timer, vGIC maintenance)
correctly when pKVM is in use
- Fix function prototype after __kvm_host_psci_cpu_entry() rename
- Skip to the next instruction when emulating writes to TCR_EL1 on
AmpereOne systems
Selftests:
- Fix missing include"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
selftests/rseq: Fix build with undefined __weak
KVM: SEV: remove ghcb variable declarations
KVM: SEV: only access GHCB fields once
KVM: SEV: snapshot the GHCB before accessing it
KVM: arm64: Skip instruction after emulating write to TCR_EL1
KVM: arm64: fix __kvm_host_psci_cpu_entry() prototype
KVM: arm64: Fix resetting SME trap values on reset for (h)VHE
KVM: arm64: Fix resetting SVE trap values on reset for hVHE
KVM: arm64: Use the appropriate feature trap register when activating traps
KVM: arm64: Helper to write to appropriate feature trap register based on mode
KVM: arm64: Disable SME traps for (h)VHE at setup
KVM: arm64: Use the appropriate feature trap register for SVE at EL2 setup
KVM: arm64: Factor out code for checking (h)VHE mode into a macro
KVM: arm64: Rephrase percpu enable/disable tracking in terms of hyp
KVM: arm64: Fix hardware enable/disable flows for pKVM
KVM: arm64: Allow pKVM on v1.0 compatible FF-A implementations
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- moxart: Fix big-endian conversion for SCR structure
- sdhci-f-sdh30: Replace with sdhci_pltfm to fix PM support
* tag 'mmc-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-f-sdh30: Replace with sdhci_pltfm
mmc: moxart: read scr register without changing byte order
|
|
Starting with patch 2cb1e08985, gfs2 started using the new function
filemap_splice_read rather than the old (and subsequently deleted)
function generic_file_splice_read.
filemap_splice_read works by taking references to a number of folios in
the page cache and splicing those folios into a pipe. The folios are
then read from the pipe and the folio references are dropped. This can
take an arbitrary amount of time. We cannot allow that in gfs2 because
those folio references will pin the inode glock to the node and prevent
it from being demoted, which can lead to cluster-wide deadlocks.
Instead, use copy_splice_read.
(In addition, the old generic_file_splice_read called into ->read_iter,
which called gfs2_file_read_iter, which took the inode glock during the
operation. The new filemap_splice_read interface does not take the
inode glock anymore. This is fixable, but it still wouldn't prevent
cluster-wide deadlocks.)
Fixes: 2cb1e08985e3 ("splice: Use filemap_splice_read() instead of generic_file_splice_read()")
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Function gfs2_trans_add_meta() checks for the SDF_FROZEN flag to make
sure that no buffers are added to a transaction while the filesystem is
frozen. With the recent freeze/thaw rework, the SDF_FROZEN flag is
cleared after thaw_super() is called, which is sufficient for
serializing freeze/thaw.
However, other filesystem operations started after thaw_super() may now
be calling gfs2_trans_add_meta() before the SDF_FROZEN flag is cleared,
which will trigger the SDF_FROZEN check in gfs2_trans_add_meta(). Fix
that by checking the s_writers.frozen state instead.
In addition, make sure not to call gfs2_assert_withdraw() with the
sd_log_lock spin lock held. Check for a withdrawn filesystem before
checking for a frozen filesystem, and don't pin/add buffers to the
current transaction in case of a failure in either case.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
The SBPB bit in MSR_IA32_PRED_CMD is supported only after a microcode
patch has been applied so set X86_FEATURE_SBPB only then. Otherwise,
guests would attempt to set that bit and #GP on the MSR write.
While at it, make SMT detection more robust as some guests - depending
on how and what CPUID leafs their report - lead to cpu_smt_control
getting set to CPU_SMT_NOT_SUPPORTED but SRSO_NO should be set for any
guest incarnation where one simply cannot do SMT, for whatever reason.
Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation")
Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reported-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
|
|
Probably a copy/paste error with the previous block, here we are
actually managing C2H IRQs.
Fixes: 17ce252266c7 ("dmaengine: xilinx: xdma: Add xilinx xdma driver")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230731101442.792514-3-miquel.raynal@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
A couple of hardware registers need to be set to reflect which
interrupts have been allocated to the device. Each register is 32-bit
wide and can receive four 8-bit values. If we provide any other interrupt
number than four, the irq_num variable will never be 0 within the while
check and the while block will loop forever.
There is an easy way to prevent this: just break the for loop
when we reach "irq_num == 0", which anyway means all interrupts have
been processed.
Cc: stable@vger.kernel.org
Fixes: 17ce252266c7 ("dmaengine: xilinx: xdma: Add xilinx xdma driver")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20230731101442.792514-2-miquel.raynal@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
No functional modification involved.
drivers/dma/owl-dma.c:208: warning: expecting prototype for struct owl_dma_pchan. Prototype was for struct owl_dma_vchan instead HDRTEST usr/include/sound/asequencer.h
Fixes: 47e20577c24d ("dmaengine: Add Actions Semi Owl family S900 DMA driver")
Signed-off-by: Zhang Jianhua <chris.zjh@huawei.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230722153244.2086949-1-chris.zjh@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Disabling IDXD device doesn't reset Page Request Service (PRS)
disable flag to its initial value 0. This may cause user confusion
because once PRS is disabled user will see PRS still remains the
previous setting (i.e. disabled) via sysfs interface even after the
device is disabled.
To eliminate user confusion, reset PRS disable flag to ensure that
the PRS flag bit reflects correct state after the device is disabled.
Additionally, simplify the code by setting wq->flags to 0, which clears
all flag bits, including any future additions.
Fixes: f2dc327131b5 ("dmaengine: idxd: add per wq PRS disable")
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230712193505.3440752-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
pl330_pause() does not set anything to indicate paused condition which
causes pl330_tx_status() to return DMA_IN_PROGRESS. This breaks 8250
DMA flush after the fix in commit 57e9af7831dc ("serial: 8250_dma: Fix
DMA Rx rearm race"). The function comment for pl330_pause() claims
pause is supported but resume is not which is enough for 8250 DMA flush
to work as long as DMA status reports DMA_PAUSED when appropriate.
Add PAUSED state for descriptor and mark BUSY descriptors with PAUSED
in pl330_pause(). Return DMA_PAUSED from pl330_tx_status() when the
descriptor is PAUSED.
Reported-by: Richard Tresidder <rtresidd@electromag.com.au>
Tested-by: Richard Tresidder <rtresidd@electromag.com.au>
Fixes: 88987d2c7534 ("dmaengine: pl330: add DMA_PAUSE feature")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-serial/f8a86ecd-64b1-573f-c2fa-59f541083f1a@electromag.com.au/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230526105434.14959-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The codeaurora.org email domain is defunct and will bounce.
Update entries to Sinan's kernel.org address which is the address in
MAINTAINERS for this component.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Acked-By: Sinan Kaya <okaya@kernel.org>
Link: https://lore.kernel.org/r/20230707195003.6619-1-quic_jhugo@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When 'mcf_edma' is allocated, some space is allocated for a
flexible array at the end of the struct. 'chans' item are allocated, that is
to say 'pdata->dma_channels'.
Then, this number of item is stored in 'mcf_edma->n_chans'.
A few lines later, if 'mcf_edma->n_chans' is 0, then a default value of 64
is set.
This ends to no space allocated by devm_kzalloc() because chans was 0, but
64 items are read and/or written in some not allocated memory.
Change the logic to define a default value before allocating the memory.
Fixes: e7a3ff92eaf1 ("dmaengine: fsl-edma: add ColdFire mcf5441x edma support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/f55d914407c900828f6fad3ea5fa791a5f17b9a4.1685172449.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix a wrong check for O_TMPFILE during RESOLVE_CACHED lookup
- Clean up directory iterators and clarify file_needs_f_pos_lock()
* tag 'v6.5-rc5.vfs.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: rely on ->iterate_shared to determine f_pos locking
vfs: get rid of old '->iterate' directory operation
proc: fix missing conversion to 'iterate_shared'
open: make RESOLVE_CACHED correctly test for O_TMPFILE
|
