summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-05net/mlx5e: TC, Remove multiple ct actions limitationPaul Blakey
Multiple ct actions was not supported when only chain was restored on misses, as CT is a modifying action which could modify the packet and cause the sw ct rule to not match again and continue processing. Now that the misses continue from the relevant tc ct action in software, this case is supported. Remove this limitation. Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-04-05net/mlx5e: TC, Remove special handling of CT actionPaul Blakey
CT action has special treating as a per-flow action since it was assumed to be singular and reordered to be first on the action list. This isn't the case anymore, and can be converted to just a FWD to pre_ct + MODIFY_HEAD, and handled per post_act rule. Remove special handling of CT action, and offload it while post parsing each ct attribute. Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-04-05net/mlx5e: TC, Remove CT action reorderingPaul Blakey
CT action reordering was done as a workaround when CT misses used to restore the relevant filter's tc chain and continuing sw processing from that chain. As such, there was a need to reorder CT action to be before any packet modifying actions (e.g mac rewrite). Currently (after patch "net/mlx5e: TC, Set CT miss to the specific ct action instance"), CT misses continues from the relevant ct action in software, and so reordering isn't needed anymore. Remove the reordering. Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-04-05net/mlx5e: CT: Use per action statsPaul Blakey
CT action can miss in a middle of an action list, use per action stats to correctly report stats for missed packets. Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-04-05net/mlx5e: TC, Move main flow attribute cleanup to helper funcPaul Blakey
Actions that can be setup per flow attribute (so per split rule) are cleaned up from mlx5_free_flow_attr(), mlx5e_tc_del_fdb_flow(), and free_flow_post_acts(). Remove the duplication by re-using the helper function for the main flow attribute and split rules attributes. Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-04-05net/mlx5e: TC, Remove unused vf_tun variablePaul Blakey
vf_tun is being assigned but never being used so remove it. Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-04-05net/mlx5e: Set default can_offload actionPaul Blakey
Many parsers of tc actions just return true on their can_offload() implementation, without checking the input flow/action. Set the default can_offload action to true (allow), and avoid having many can_offload implementations that do just that. This patch doesn't change any functionality. Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-04-05net/sched: sch_mqprio: use netlink payload helpersPedro Tammela
For the sake of readability, use the netlink payload helpers from the 'nla_get_*()' family to parse the attributes. tdc results: 1..5 ok 1 9903 - Add mqprio Qdisc to multi-queue device (8 queues) ok 2 453a - Delete nonexistent mqprio Qdisc ok 3 5292 - Delete mqprio Qdisc twice ok 4 45a9 - Add mqprio Qdisc to single-queue device ok 5 2ba9 - Show mqprio class Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230404203449.1627033-1-pctammela@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-05maple_tree: fix a potential concurrency bug in RCU modePeng Zhang
There is a concurrency bug that may cause the wrong value to be loaded when a CPU is modifying the maple tree. CPU1: mtree_insert_range() mas_insert() mas_store_root() ... mas_root_expand() ... rcu_assign_pointer(mas->tree->ma_root, mte_mk_root(mas->node)); ma_set_meta(node, maple_leaf_64, 0, slot); <---IP CPU2: mtree_load() mtree_lookup_walk() ma_data_end(); When CPU1 is about to execute the instruction pointed to by IP, the ma_data_end() executed by CPU2 may return the wrong end position, which will cause the value loaded by mtree_load() to be wrong. An example of triggering the bug: Add mdelay(100) between rcu_assign_pointer() and ma_set_meta() in mas_root_expand(). static DEFINE_MTREE(tree); int work(void *p) { unsigned long val; for (int i = 0 ; i< 30; ++i) { val = (unsigned long)mtree_load(&tree, 8); mdelay(5); pr_info("%lu",val); } return 0; } mt_init_flags(&tree, MT_FLAGS_USE_RCU); mtree_insert(&tree, 0, (void*)12345, GFP_KERNEL); run_thread(work) mtree_insert(&tree, 1, (void*)56789, GFP_KERNEL); In RCU mode, mtree_load() should always return the value before or after the data structure is modified, and in this example mtree_load(&tree, 8) may return 56789 which is not expected, it should always return NULL. Fix it by put ma_set_meta() before rcu_assign_pointer(). Link: https://lkml.kernel.org/r/20230314124203.91572-4-zhangpeng.00@bytedance.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05maple_tree: fix get wrong data_end in mtree_lookup_walk()Peng Zhang
if (likely(offset > end)) max = pivots[offset]; The above code should be changed to if (likely(offset < end)), which is correct. This affects the correctness of ma_data_end(). Now it seems that the final result will not be wrong, but it is best to change it. This patch does not change the code as above, because it simplifies the code by the way. Link: https://lkml.kernel.org/r/20230314124203.91572-1-zhangpeng.00@bytedance.com Link: https://lkml.kernel.org/r/20230314124203.91572-2-zhangpeng.00@bytedance.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05mm/swap: fix swap_info_struct race between swapoff and get_swap_pages()Rongwei Wang
The si->lock must be held when deleting the si from the available list. Otherwise, another thread can re-add the si to the available list, which can lead to memory corruption. The only place we have found where this happens is in the swapoff path. This case can be described as below: core 0 core 1 swapoff del_from_avail_list(si) waiting try lock si->lock acquire swap_avail_lock and re-add si into swap_avail_head acquire si->lock but missing si already being added again, and continuing to clear SWP_WRITEOK, etc. It can be easily found that a massive warning messages can be triggered inside get_swap_pages() by some special cases, for example, we call madvise(MADV_PAGEOUT) on blocks of touched memory concurrently, meanwhile, run much swapon-swapoff operations (e.g. stress-ng-swap). However, in the worst case, panic can be caused by the above scene. In swapoff(), the memory used by si could be kept in swap_info[] after turning off a swap. This means memory corruption will not be caused immediately until allocated and reset for a new swap in the swapon path. A panic message caused: (with CONFIG_PLIST_DEBUG enabled) ------------[ cut here ]------------ top: 00000000e58a3003, n: 0000000013e75cda, p: 000000008cd4451a prev: 0000000035b1e58a, n: 000000008cd4451a, p: 000000002150ee8d next: 000000008cd4451a, n: 000000008cd4451a, p: 000000008cd4451a WARNING: CPU: 21 PID: 1843 at lib/plist.c:60 plist_check_prev_next_node+0x50/0x70 Modules linked in: rfkill(E) crct10dif_ce(E)... CPU: 21 PID: 1843 Comm: stress-ng Kdump: ... 5.10.134+ Hardware name: Alibaba Cloud ECS, BIOS 0.0.0 02/06/2015 pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--) pc : plist_check_prev_next_node+0x50/0x70 lr : plist_check_prev_next_node+0x50/0x70 sp : ffff0018009d3c30 x29: ffff0018009d3c40 x28: ffff800011b32a98 x27: 0000000000000000 x26: ffff001803908000 x25: ffff8000128ea088 x24: ffff800011b32a48 x23: 0000000000000028 x22: ffff001800875c00 x21: ffff800010f9e520 x20: ffff001800875c00 x19: ffff001800fdc6e0 x18: 0000000000000030 x17: 0000000000000000 x16: 0000000000000000 x15: 0736076307640766 x14: 0730073007380731 x13: 0736076307640766 x12: 0730073007380731 x11: 000000000004058d x10: 0000000085a85b76 x9 : ffff8000101436e4 x8 : ffff800011c8ce08 x7 : 0000000000000000 x6 : 0000000000000001 x5 : ffff0017df9ed338 x4 : 0000000000000001 x3 : ffff8017ce62a000 x2 : ffff0017df9ed340 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: plist_check_prev_next_node+0x50/0x70 plist_check_head+0x80/0xf0 plist_add+0x28/0x140 add_to_avail_list+0x9c/0xf0 _enable_swap_info+0x78/0xb4 __do_sys_swapon+0x918/0xa10 __arm64_sys_swapon+0x20/0x30 el0_svc_common+0x8c/0x220 do_el0_svc+0x2c/0x90 el0_svc+0x1c/0x30 el0_sync_handler+0xa8/0xb0 el0_sync+0x148/0x180 irq event stamp: 2082270 Now, si->lock locked before calling 'del_from_avail_list()' to make sure other thread see the si had been deleted and SWP_WRITEOK cleared together, will not reinsert again. This problem exists in versions after stable 5.10.y. Link: https://lkml.kernel.org/r/20230404154716.23058-1-rongwei.wang@linux.alibaba.com Fixes: a2468cc9bfdff ("swap: choose swap device according to numa node") Tested-by: Yongchen Yin <wb-yyc939293@alibaba-inc.com> Signed-off-by: Rongwei Wang <rongwei.wang@linux.alibaba.com> Cc: Bagas Sanjaya <bagasdotme@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Aaron Lu <aaron.lu@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05nilfs2: fix sysfs interface lifetimeRyusuke Konishi
The current nilfs2 sysfs support has issues with the timing of creation and deletion of sysfs entries, potentially leading to null pointer dereferences, use-after-free, and lockdep warnings. Some of the sysfs attributes for nilfs2 per-filesystem instance refer to metadata file "cpfile", "sufile", or "dat", but nilfs_sysfs_create_device_group that creates those attributes is executed before the inodes for these metadata files are loaded, and nilfs_sysfs_delete_device_group which deletes these sysfs entries is called after releasing their metadata file inodes. Therefore, access to some of these sysfs attributes may occur outside of the lifetime of these metadata files, resulting in inode NULL pointer dereferences or use-after-free. In addition, the call to nilfs_sysfs_create_device_group() is made during the locking period of the semaphore "ns_sem" of nilfs object, so the shrinker call caused by the memory allocation for the sysfs entries, may derive lock dependencies "ns_sem" -> (shrinker) -> "locks acquired in nilfs_evict_inode()". Since nilfs2 may acquire "ns_sem" deep in the call stack holding other locks via its error handler __nilfs_error(), this causes lockdep to report circular locking. This is a false positive and no circular locking actually occurs as no inodes exist yet when nilfs_sysfs_create_device_group() is called. Fortunately, the lockdep warnings can be resolved by simply moving the call to nilfs_sysfs_create_device_group() out of "ns_sem". This fixes these sysfs issues by revising where the device's sysfs interface is created/deleted and keeping its lifetime within the lifetime of the metadata files above. Link: https://lkml.kernel.org/r/20230330205515.6167-1-konishi.ryusuke@gmail.com Fixes: dd70edbde262 ("nilfs2: integrate sysfs support into driver") Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+979fa7f9c0d086fdc282@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/0000000000003414b505f7885f7e@google.com Reported-by: syzbot+5b7d542076d9bddc3c6a@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/0000000000006ac86605f5f44eb9@google.com Cc: Viacheslav Dubeyko <slava@dubeyko.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05mm: take a page reference when removing device exclusive entriesAlistair Popple
Device exclusive page table entries are used to prevent CPU access to a page whilst it is being accessed from a device. Typically this is used to implement atomic operations when the underlying bus does not support atomic access. When a CPU thread encounters a device exclusive entry it locks the page and restores the original entry after calling mmu notifiers to signal drivers that exclusive access is no longer available. The device exclusive entry holds a reference to the page making it safe to access the struct page whilst the entry is present. However the fault handling code does not hold the PTL when taking the page lock. This means if there are multiple threads faulting concurrently on the device exclusive entry one will remove the entry whilst others will wait on the page lock without holding a reference. This can lead to threads locking or waiting on a folio with a zero refcount. Whilst mmap_lock prevents the pages getting freed via munmap() they may still be freed by a migration. This leads to warnings such as PAGE_FLAGS_CHECK_AT_FREE due to the page being locked when the refcount drops to zero. Fix this by trying to take a reference on the folio before locking it. The code already checks the PTE under the PTL and aborts if the entry is no longer there. It is also possible the folio has been unmapped, freed and re-allocated allowing a reference to be taken on an unrelated folio. This case is also detected by the PTE check and the folio is unlocked without further changes. Link: https://lkml.kernel.org/r/20230330012519.804116-1-apopple@nvidia.com Fixes: b756a3b5e7ea ("mm: device exclusive memory access") Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05mm: vmalloc: avoid warn_alloc noise caused by fatal signalYafang Shao
There're some suspicious warn_alloc on my test serer, for example, [13366.518837] warn_alloc: 81 callbacks suppressed [13366.518841] test_verifier: vmalloc error: size 4096, page order 0, failed to allocate pages, mode:0x500dc2(GFP_HIGHUSER|__GFP_ZERO|__GFP_ACCOUNT), nodemask=(null),cpuset=/,mems_allowed=0-1 [13366.522240] CPU: 30 PID: 722463 Comm: test_verifier Kdump: loaded Tainted: G W O 6.2.0+ #638 [13366.524216] Call Trace: [13366.524702] <TASK> [13366.525148] dump_stack_lvl+0x6c/0x80 [13366.525712] dump_stack+0x10/0x20 [13366.526239] warn_alloc+0x119/0x190 [13366.526783] ? alloc_pages_bulk_array_mempolicy+0x9e/0x2a0 [13366.527470] __vmalloc_area_node+0x546/0x5b0 [13366.528066] __vmalloc_node_range+0xc2/0x210 [13366.528660] __vmalloc_node+0x42/0x50 [13366.529186] ? bpf_prog_realloc+0x53/0xc0 [13366.529743] __vmalloc+0x1e/0x30 [13366.530235] bpf_prog_realloc+0x53/0xc0 [13366.530771] bpf_patch_insn_single+0x80/0x1b0 [13366.531351] bpf_jit_blind_constants+0xe9/0x1c0 [13366.531932] ? __free_pages+0xee/0x100 [13366.532457] ? free_large_kmalloc+0x58/0xb0 [13366.533002] bpf_int_jit_compile+0x8c/0x5e0 [13366.533546] bpf_prog_select_runtime+0xb4/0x100 [13366.534108] bpf_prog_load+0x6b1/0xa50 [13366.534610] ? perf_event_task_tick+0x96/0xb0 [13366.535151] ? security_capable+0x3a/0x60 [13366.535663] __sys_bpf+0xb38/0x2190 [13366.536120] ? kvm_clock_get_cycles+0x9/0x10 [13366.536643] __x64_sys_bpf+0x1c/0x30 [13366.537094] do_syscall_64+0x38/0x90 [13366.537554] entry_SYSCALL_64_after_hwframe+0x72/0xdc [13366.538107] RIP: 0033:0x7f78310f8e29 [13366.538561] Code: 01 00 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 17 e0 2c 00 f7 d8 64 89 01 48 [13366.540286] RSP: 002b:00007ffe2a61fff8 EFLAGS: 00000206 ORIG_RAX: 0000000000000141 [13366.541031] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f78310f8e29 [13366.541749] RDX: 0000000000000080 RSI: 00007ffe2a6200b0 RDI: 0000000000000005 [13366.542470] RBP: 00007ffe2a620010 R08: 00007ffe2a6202a0 R09: 00007ffe2a6200b0 [13366.543183] R10: 00000000000f423e R11: 0000000000000206 R12: 0000000000407800 [13366.543900] R13: 00007ffe2a620540 R14: 0000000000000000 R15: 0000000000000000 [13366.544623] </TASK> [13366.545260] Mem-Info: [13366.546121] active_anon:81319 inactive_anon:20733 isolated_anon:0 active_file:69450 inactive_file:5624 isolated_file:0 unevictable:0 dirty:10 writeback:0 slab_reclaimable:69649 slab_unreclaimable:48930 mapped:27400 shmem:12868 pagetables:4929 sec_pagetables:0 bounce:0 kernel_misc_reclaimable:0 free:15870308 free_pcp:142935 free_cma:0 [13366.551886] Node 0 active_anon:224836kB inactive_anon:33528kB active_file:175692kB inactive_file:13752kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:59248kB dirty:32kB writeback:0kB shmem:18252kB shmem_thp: 0kB shmem_pmdmapped: 0kB anon_thp: 0kB writeback_tmp:0kB kernel_stack:4616kB pagetables:10664kB sec_pagetables:0kB all_unreclaimable? no [13366.555184] Node 1 active_anon:100440kB inactive_anon:49404kB active_file:102108kB inactive_file:8744kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:50352kB dirty:8kB writeback:0kB shmem:33220kB shmem_thp: 0kB shmem_pmdmapped: 0kB anon_thp: 0kB writeback_tmp:0kB kernel_stack:3896kB pagetables:9052kB sec_pagetables:0kB all_unreclaimable? no [13366.558262] Node 0 DMA free:15360kB boost:0kB min:304kB low:380kB high:456kB reserved_highatomic:0KB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB present:15992kB managed:15360kB mlocked:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB [13366.560821] lowmem_reserve[]: 0 2735 31873 31873 31873 [13366.561981] Node 0 DMA32 free:2790904kB boost:0kB min:56028kB low:70032kB high:84036kB reserved_highatomic:0KB active_anon:1936kB inactive_anon:20kB active_file:396kB inactive_file:344kB unevictable:0kB writepending:0kB present:3129200kB managed:2801520kB mlocked:0kB bounce:0kB free_pcp:5188kB local_pcp:0kB free_cma:0kB [13366.565148] lowmem_reserve[]: 0 0 29137 29137 29137 [13366.566168] Node 0 Normal free:28533824kB boost:0kB min:596740kB low:745924kB high:895108kB reserved_highatomic:28672KB active_anon:222900kB inactive_anon:33508kB active_file:175296kB inactive_file:13408kB unevictable:0kB writepending:32kB present:30408704kB managed:29837172kB mlocked:0kB bounce:0kB free_pcp:295724kB local_pcp:0kB free_cma:0kB [13366.569485] lowmem_reserve[]: 0 0 0 0 0 [13366.570416] Node 1 Normal free:32141144kB boost:0kB min:660504kB low:825628kB high:990752kB reserved_highatomic:69632KB active_anon:100440kB inactive_anon:49404kB active_file:102108kB inactive_file:8744kB unevictable:0kB writepending:8kB present:33554432kB managed:33025372kB mlocked:0kB bounce:0kB free_pcp:270880kB local_pcp:46860kB free_cma:0kB [13366.573403] lowmem_reserve[]: 0 0 0 0 0 [13366.574015] Node 0 DMA: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 1*1024kB (U) 1*2048kB (M) 3*4096kB (M) = 15360kB [13366.575474] Node 0 DMA32: 782*4kB (UME) 756*8kB (UME) 736*16kB (UME) 745*32kB (UME) 694*64kB (UME) 653*128kB (UME) 595*256kB (UME) 552*512kB (UME) 454*1024kB (UME) 347*2048kB (UME) 246*4096kB (UME) = 2790904kB [13366.577442] Node 0 Normal: 33856*4kB (UMEH) 51815*8kB (UMEH) 42418*16kB (UMEH) 36272*32kB (UMEH) 22195*64kB (UMEH) 10296*128kB (UMEH) 7238*256kB (UMEH) 5638*512kB (UEH) 5337*1024kB (UMEH) 3506*2048kB (UMEH) 1470*4096kB (UME) = 28533784kB [13366.580460] Node 1 Normal: 15776*4kB (UMEH) 37485*8kB (UMEH) 29509*16kB (UMEH) 21420*32kB (UMEH) 14818*64kB (UMEH) 13051*128kB (UMEH) 9918*256kB (UMEH) 7374*512kB (UMEH) 5397*1024kB (UMEH) 3887*2048kB (UMEH) 2002*4096kB (UME) = 32141240kB [13366.583027] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=1048576kB [13366.584380] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB [13366.585702] Node 1 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=1048576kB [13366.587042] Node 1 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB [13366.588372] 87386 total pagecache pages [13366.589266] 0 pages in swap cache [13366.590327] Free swap = 0kB [13366.591227] Total swap = 0kB [13366.592142] 16777082 pages RAM [13366.593057] 0 pages HighMem/MovableOnly [13366.594037] 357226 pages reserved [13366.594979] 0 pages hwpoisoned This failure really confuse me as there're still lots of available pages. Finally I figured out it was caused by a fatal signal. When a process is allocating memory via vm_area_alloc_pages(), it will break directly even if it hasn't allocated the requested pages when it receives a fatal signal. In that case, we shouldn't show this warn_alloc, as it is useless. We only need to show this warning when there're really no enough pages. Link: https://lkml.kernel.org/r/20230330162625.13604-1-laoar.shao@gmail.com Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05nilfs2: initialize "struct nilfs_binfo_dat"->bi_pad fieldTetsuo Handa
nilfs_btree_assign_p() and nilfs_direct_assign_p() are not initializing "struct nilfs_binfo_dat"->bi_pad field, causing uninit-value reports when being passed to CRC function. Link: https://lkml.kernel.org/r/20230326152146.15872-1-konishi.ryusuke@gmail.com Reported-by: syzbot <syzbot+048585f3f4227bb2b49b@syzkaller.appspotmail.com> Link: https://syzkaller.appspot.com/bug?extid=048585f3f4227bb2b49b Reported-by: Dipanjan Das <mail.dipanjan.das@gmail.com> Link: https://lkml.kernel.org/r/CANX2M5bVbzRi6zH3PTcNE_31TzerstOXUa9Bay4E6y6dX23_pg@mail.gmail.com Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05nilfs2: fix potential UAF of struct nilfs_sc_info in nilfs_segctor_thread()Ryusuke Konishi
The finalization of nilfs_segctor_thread() can race with nilfs_segctor_kill_thread() which terminates that thread, potentially causing a use-after-free BUG as KASAN detected. At the end of nilfs_segctor_thread(), it assigns NULL to "sc_task" member of "struct nilfs_sc_info" to indicate the thread has finished, and then notifies nilfs_segctor_kill_thread() of this using waitqueue "sc_wait_task" on the struct nilfs_sc_info. However, here, immediately after the NULL assignment to "sc_task", it is possible that nilfs_segctor_kill_thread() will detect it and return to continue the deallocation, freeing the nilfs_sc_info structure before the thread does the notification. This fixes the issue by protecting the NULL assignment to "sc_task" and its notification, with spinlock "sc_state_lock" of the struct nilfs_sc_info. Since nilfs_segctor_kill_thread() does a final check to see if "sc_task" is NULL with "sc_state_lock" locked, this can eliminate the race. Link: https://lkml.kernel.org/r/20230327175318.8060-1-konishi.ryusuke@gmail.com Reported-by: syzbot+b08ebcc22f8f3e6be43a@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/00000000000000660d05f7dfa877@google.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05zsmalloc: document freeable statsSergey Senozhatsky
When freeable class stat was added to classes file (back in 2016) we forgot to update zsmalloc documentation. Fix that. Link: https://lkml.kernel.org/r/20230325024631.2817153-3-senozhatsky@chromium.org Fixes: 1120ed548394 ("mm/zsmalloc: add `freeable' column to pool stat") Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Minchan Kim <minchan@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05zsmalloc: document new fullness groupingSergey Senozhatsky
Patch series "zsmalloc: minor documentation updates". Two minor patches that bring zsmalloc documentation up to date. This patch (of 2): Update documentation and reflect new zspages fullness grouping (we don't use almost_empty and almost_full anymore). Link: https://lkml.kernel.org/r/20230325024631.2817153-1-senozhatsky@chromium.org Link: https://lkml.kernel.org/r/20230325024631.2817153-2-senozhatsky@chromium.org Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Fixes: 67e157eb3639 ("zsmalloc: show per fullness group class stats") Cc: Minchan Kim <minchan@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05fsdax: force clear dirty mark if CoWShiyang Ruan
XFS allows CoW on non-shared extents to combat fragmentation[1]. The old non-shared extent could be mwrited before, its dax entry is marked dirty. This results in a WARNing: [ 28.512349] ------------[ cut here ]------------ [ 28.512622] WARNING: CPU: 2 PID: 5255 at fs/dax.c:390 dax_insert_entry+0x342/0x390 [ 28.513050] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace fscache netfs nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables [ 28.515462] CPU: 2 PID: 5255 Comm: fsstress Kdump: loaded Not tainted 6.3.0-rc1-00001-g85e1481e19c1-dirty #117 [ 28.515902] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.1-1-1 04/01/2014 [ 28.516307] RIP: 0010:dax_insert_entry+0x342/0x390 [ 28.516536] Code: 30 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 48 8b 45 20 48 83 c0 01 e9 e2 fe ff ff 48 8b 45 20 48 83 c0 01 e9 cd fe ff ff <0f> 0b e9 53 ff ff ff 48 8b 7c 24 08 31 f6 e8 1b 61 a1 00 eb 8c 48 [ 28.517417] RSP: 0000:ffffc9000845fb18 EFLAGS: 00010086 [ 28.517721] RAX: 0000000000000053 RBX: 0000000000000155 RCX: 000000000018824b [ 28.518113] RDX: 0000000000000000 RSI: ffffffff827525a6 RDI: 00000000ffffffff [ 28.518515] RBP: ffffea00062092c0 R08: 0000000000000000 R09: ffffc9000845f9c8 [ 28.518905] R10: 0000000000000003 R11: ffffffff82ddb7e8 R12: 0000000000000155 [ 28.519301] R13: 0000000000000000 R14: 000000000018824b R15: ffff88810cfa76b8 [ 28.519703] FS: 00007f14a0c94740(0000) GS:ffff88817bd00000(0000) knlGS:0000000000000000 [ 28.520148] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 28.520472] CR2: 00007f14a0c8d000 CR3: 000000010321c004 CR4: 0000000000770ee0 [ 28.520863] PKRU: 55555554 [ 28.521043] Call Trace: [ 28.521219] <TASK> [ 28.521368] dax_fault_iter+0x196/0x390 [ 28.521595] dax_iomap_pte_fault+0x19b/0x3d0 [ 28.521852] __xfs_filemap_fault+0x234/0x2b0 [ 28.522116] __do_fault+0x30/0x130 [ 28.522334] do_fault+0x193/0x340 [ 28.522586] __handle_mm_fault+0x2d3/0x690 [ 28.522975] handle_mm_fault+0xe6/0x2c0 [ 28.523259] do_user_addr_fault+0x1bc/0x6f0 [ 28.523521] exc_page_fault+0x60/0x140 [ 28.523763] asm_exc_page_fault+0x22/0x30 [ 28.524001] RIP: 0033:0x7f14a0b589ca [ 28.524225] Code: c5 fe 7f 07 c5 fe 7f 47 20 c5 fe 7f 47 40 c5 fe 7f 47 60 c5 f8 77 c3 66 0f 1f 84 00 00 00 00 00 40 0f b6 c6 48 89 d1 48 89 fa <f3> aa 48 89 d0 c5 f8 77 c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 [ 28.525198] RSP: 002b:00007fff1dea1c98 EFLAGS: 00010202 [ 28.525505] RAX: 000000000000001e RBX: 000000000014a000 RCX: 0000000000006046 [ 28.525895] RDX: 00007f14a0c82000 RSI: 000000000000001e RDI: 00007f14a0c8d000 [ 28.526290] RBP: 000000000000006f R08: 0000000000000004 R09: 000000000014a000 [ 28.526681] R10: 0000000000000008 R11: 0000000000000246 R12: 028f5c28f5c28f5c [ 28.527067] R13: 8f5c28f5c28f5c29 R14: 0000000000011046 R15: 00007f14a0c946c0 [ 28.527449] </TASK> [ 28.527600] ---[ end trace 0000000000000000 ]--- To be able to delete this entry, clear its dirty mark before invalidate_inode_pages2_range(). [1] https://lore.kernel.org/linux-xfs/20230321151339.GA11376@frogsfrogsfrogs/ Link: https://lkml.kernel.org/r/1679653680-2-1-git-send-email-ruansy.fnst@fujitsu.com Fixes: f80e1668888f3 ("fsdax: invalidate pages when CoW") Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05mm/hugetlb: fix uffd wr-protection for CoW optimization pathPeter Xu
This patch fixes an issue that a hugetlb uffd-wr-protected mapping can be writable even with uffd-wp bit set. It only happens with hugetlb private mappings, when someone firstly wr-protects a missing pte (which will install a pte marker), then a write to the same page without any prior access to the page. Userfaultfd-wp trap for hugetlb was implemented in hugetlb_fault() before reaching hugetlb_wp() to avoid taking more locks that userfault won't need. However there's one CoW optimization path that can trigger hugetlb_wp() inside hugetlb_no_page(), which will bypass the trap. This patch skips hugetlb_wp() for CoW and retries the fault if uffd-wp bit is detected. The new path will only trigger in the CoW optimization path because generic hugetlb_fault() (e.g. when a present pte was wr-protected) will resolve the uffd-wp bit already. Also make sure anonymous UNSHARE won't be affected and can still be resolved, IOW only skip CoW not CoR. This patch will be needed for v5.19+ hence copy stable. [peterx@redhat.com: v2] Link: https://lkml.kernel.org/r/ZBzOqwF2wrHgBVZb@x1n [peterx@redhat.com: v3] Link: https://lkml.kernel.org/r/20230324142620.2344140-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20230321191840.1897940-1-peterx@redhat.com Fixes: 166f3ecc0daf ("mm/hugetlb: hook page faults for uffd write protection") Signed-off-by: Peter Xu <peterx@redhat.com> Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05mm: enable maple tree RCU mode by defaultLiam R. Howlett
Use the maple tree in RCU mode for VMA tracking. The maple tree tracks the stack and is able to update the pivot (lower/upper boundary) in-place to allow the page fault handler to write to the tree while holding just the mmap read lock. This is safe as the writes to the stack have a guard VMA which ensures there will always be a NULL in the direction of the growth and thus will only update a pivot. It is possible, but not recommended, to have VMAs that grow up/down without guard VMAs. syzbot has constructed a testcase which sets up a VMA to grow and consume the empty space. Overwriting the entire NULL entry causes the tree to be altered in a way that is not safe for concurrent readers; the readers may see a node being rewritten or one that does not match the maple state they are using. Enabling RCU mode allows the concurrent readers to see a stable node and will return the expected result. [Liam.Howlett@Oracle.com: we don't need to free the nodes with RCU[ Link: https://lore.kernel.org/linux-mm/000000000000b0a65805f663ace6@google.com/ Link: https://lkml.kernel.org/r/20230227173632.3292573-9-surenb@google.com Fixes: d4af56c5c7c6 ("mm: start tracking VMAs with maple tree") Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Reported-by: syzbot+8d95422d3537159ca390@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05maple_tree: add RCU lock checking to rcu callback functionsLiam R. Howlett
Dereferencing RCU objects within the RCU callback without the RCU check has caused lockdep to complain. Fix the RCU dereferencing by using the RCU callback lock to ensure the operation is safe. Also stop creating a new lock to use for dereferencing during destruction of the tree or subtree. Instead, pass through a pointer to the tree that has the lock that is held for RCU dereferencing checking. It also does not make sense to use the maple state in the freeing scenario as the tree walk is a special case where the tree no longer has the normal encodings and parent pointers. Link: https://lkml.kernel.org/r/20230227173632.3292573-8-surenb@google.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reported-by: Suren Baghdasaryan <surenb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05maple_tree: add smp_rmb() to dead node detectionLiam R. Howlett
Add an smp_rmb() before reading the parent pointer to ensure that anything read from the node prior to the parent pointer hasn't been reordered ahead of this check. The is necessary for RCU mode. Link: https://lkml.kernel.org/r/20230227173632.3292573-7-surenb@google.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05maple_tree: fix write memory barrier of nodes once dead for RCU modeLiam R. Howlett
During the development of the maple tree, the strategy of freeing multiple nodes changed and, in the process, the pivots were reused to store pointers to dead nodes. To ensure the readers see accurate pivots, the writers need to mark the nodes as dead and call smp_wmb() to ensure any readers can identify the node as dead before using the pivot values. There were two places where the old method of marking the node as dead without smp_wmb() were being used, which resulted in RCU readers seeing the wrong pivot value before seeing the node was dead. Fix this race condition by using mte_set_node_dead() which has the smp_wmb() call to ensure the race is closed. Add a WARN_ON() to the ma_free_rcu() call to ensure all nodes being freed are marked as dead to ensure there are no other call paths besides the two updated paths. This is necessary for the RCU mode of the maple tree. Link: https://lkml.kernel.org/r/20230227173632.3292573-6-surenb@google.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05maple_tree: remove extra smp_wmb() from mas_dead_leaves()Liam Howlett
The call to mte_set_dead_node() before the smp_wmb() already calls smp_wmb() so this is not needed. This is an optimization for the RCU mode of the maple tree. Link: https://lkml.kernel.org/r/20230227173632.3292573-5-surenb@google.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05maple_tree: fix freeing of nodes in rcu modeLiam Howlett
The walk to destroy the nodes was not always setting the node type and would result in a destroy method potentially using the values as nodes. Avoid this by setting the correct node types. This is necessary for the RCU mode of the maple tree. Link: https://lkml.kernel.org/r/20230227173632.3292573-4-surenb@google.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05maple_tree: detect dead nodes in mas_start()Liam Howlett
When initially starting a search, the root node may already be in the process of being replaced in RCU mode. Detect and restart the walk if this is the case. This is necessary for RCU mode of the maple tree. Link: https://lkml.kernel.org/r/20230227173632.3292573-3-surenb@google.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05maple_tree: be more cautious about dead nodesLiam Howlett
Patch series "Fix VMA tree modification under mmap read lock". Syzbot reported a BUG_ON in mm/mmap.c which was found to be caused by an inconsistency between threads walking the VMA maple tree. The inconsistency is caused by the page fault handler modifying the maple tree while holding the mmap_lock for read. This only happens for stack VMAs. We had thought this was safe as it only modifies a single pivot in the tree. Unfortunately, syzbot constructed a test case where the stack had no guard page and grew the stack to abut the next VMA. This causes us to delete the NULL entry between the two VMAs and rewrite the node. We considered several options for fixing this, including dropping the mmap_lock, then reacquiring it for write; and relaxing the definition of the tree to permit a zero-length NULL entry in the node. We decided the best option was to backport some of the RCU patches from -next, which solve the problem by allocating a new node and RCU-freeing the old node. Since the problem exists in 6.1, we preferred a solution which is similar to the one we intended to merge next merge window. These patches have been in -next since next-20230301, and have received intensive testing in Android as part of the RCU page fault patchset. They were also sent as part of the "Per-VMA locks" v4 patch series. Patches 1 to 7 are bug fixes for RCU mode of the tree and patch 8 enables RCU mode for the tree. Performance v6.3-rc3 vs patched v6.3-rc3: Running these changes through mmtests showed there was a 15-20% performance decrease in will-it-scale/brk1-processes. This tests creating and inserting a single VMA repeatedly through the brk interface and isn't representative of any real world applications. This patch (of 8): ma_pivots() and ma_data_end() may be called with a dead node. Ensure to that the node isn't dead before using the returned values. This is necessary for RCU mode of the maple tree. Link: https://lkml.kernel.org/r/20230327185532.2354250-1-Liam.Howlett@oracle.com Link: https://lkml.kernel.org/r/20230227173632.3292573-1-surenb@google.com Link: https://lkml.kernel.org/r/20230227173632.3292573-2-surenb@google.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjun Roy <arjunroy@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Chris Li <chriscli@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: freak07 <michalechner92@googlemail.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Oskolkov <posk@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05dt-bindings: net: dsa: brcm,sf2: Drop unneeded "#address-cells/#size-cells"Rob Herring
There's no need for "#address-cells/#size-cells" in the brcm,sf2 node as no immediate child nodes have an address. What was probably intended was to put them in the 'ports' node, but that's not necessary as that is covered by ethernet-switch.yaml via dsa.yaml. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230404204152.635400-1-robh@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-05dt-bindings: net: ethernet-switch: Make "#address-cells/#size-cells" requiredRob Herring
The schema doesn't allow for a single (unaddressed) ethernet port node nor does a single port switch make much sense. So if there's always multiple child nodes, "#address-cells" and "#size-cells" should be required. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230404204213.635773-1-robh@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-05Merge tag 'wireless-next-2023-04-05' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.3 Smaller pull request this time, sending this early to fix the conflict in mac80211. Nothing really special this time, only smaller changes. * enable Wi-Fi 7 (EHT) mesh support * tag 'wireless-next-2023-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (37 commits) wifi: rt2x00: Fix memory leak when handling surveys wifi: b43legacy: Remove the unused function prev_slot() wifi: rtw89: Remove redundant pci_clear_master wifi: rtw89: fix potential race condition between napi_init and napi_enable wifi: rtw89: config EDCCA threshold during scan to prevent TX failed wifi: rtw89: fix incorrect channel info during scan due to ppdu_sts filtering wifi: rtw89: remove superfluous H2C of join_info wifi: rtw89: set data lowest rate according to AP supported rate wifi: rtw89: add counters of register-based H2C/C2H wifi: rtw89: coex: Update Wi-Fi Bluetooth coexistence version to 7.0.1 wifi: rtw89: coex: Add report control v5 variation wifi: rtw89: coex: Update RTL8852B LNA2 hardware parameter wifi: rtw89: coex: Not to enable firmware report when WiFi is power saving wifi: rtw89: coex: Add LPS protocol radio state for RTL8852B bcma: remove unused mips_read32 function bcma: Use of_address_to_resource() wifi: mwifiex: remove unused evt_buf variable wifi: brcmsmac: ampdu: remove unused suc_mpdu variable wifi: rtlwifi: fix incorrect error codes in rtl_debugfs_set_write_reg() wifi: rtlwifi: fix incorrect error codes in rtl_debugfs_set_write_rfreg() ... ==================== Link: https://lore.kernel.org/r/20230405111037.4792BC43443@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-05Merge tag 'wireless-2023-04-05' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v6.3 mt76 has a fix for leaking cleartext frames on a certain scenario and two firmware file handling related fixes. For brcmfmac we have a fix for an older SDIO suspend regression and for ath11k avoiding a kernel crash during hibernation with SUSE kernels. * tag 'wireless-2023-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mt76: ignore key disable commands wifi: ath11k: reduce the MHI timeout to 20s wifi: mt76: mt7921: fix fw used for offload check for mt7922 wifi: mt76: mt7921: Fix use-after-free in fw features query. wifi: brcmfmac: Fix SDIO suspend/resume regression ==================== Link: https://lore.kernel.org/r/20230405105536.4E946C433D2@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-05Merge tag 'linux-can-fixes-for-6.3-20230405' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2023-04-05 The first patch is by Oleksij Rempel and fixes a out-of-bounds memory access in the j1939 protocol. The remaining 3 patches target the ISOTP protocol. Oliver Hartkopp fixes the ISOTP protocol to pass information about dropped PDUs to the user space via control messages. Michal Sojka's patch fixes poll() to not forward false EPOLLOUT events. And Oliver Hartkopp fixes a race condition between isotp_sendsmg() and isotp_release(). * tag 'linux-can-fixes-for-6.3-20230405' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: isotp: fix race between isotp_sendsmg() and isotp_release() can: isotp: isotp_ops: fix poll() to not report false EPOLLOUT events can: isotp: isotp_recvmsg(): use sock_recv_cmsgs() to get SOCK_RXQ_OVFL infos can: j1939: j1939_tp_tx_dat_new(): fix out-of-bounds memory access ==================== Link: https://lore.kernel.org/r/20230405092444.1802340-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-05Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-04-04 (ice) This series contains updates to ice driver only. Simei adjusts error path on adding VF Flow Director filters that were not releasing all resources. Lingyu adds setting/resetting of VF Flow Director filters counters during initialization. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Reset FDIR counter in FDIR init stage ice: fix wrong fallback logic for FDIR ==================== Link: https://lore.kernel.org/r/20230404172306.450880-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-05Merge tag 'linux-can-next-for-6.4-20230404-2' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2023-04-04-2 The first patch is by Oliver Hartkopp and makes the maximum pdu size of the CAN ISOTP protocol configurable. The following 5 patches are by Dario Binacchi and add support for the bxCAN controller by ST. Geert Uytterhoeven's patch for the rcar_canfd driver fixes a sparse warning. Peng Fan's patch adds an optional power-domains property to the flexcan device tree binding. Frank Jungclaus adds support for CAN_CTRLMODE_BERR_REPORTING to the esd_usb driver. The last patch is by Oliver Hartkopp and converts the USB IDs of the kvaser_usb driver to hexadecimal values. * tag 'linux-can-next-for-6.4-20230404-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: kvaser_usb: convert USB IDs to hexadecimal values can: esd_usb: Add support for CAN_CTRLMODE_BERR_REPORTING dt-bindings: can: fsl,flexcan: add optional power-domains property can: rcar_canfd: rcar_canfd_probe(): fix plain integer in transceivers[] init can: bxcan: add support for ST bxCAN controller ARM: dts: stm32: add pin map for CAN controller on stm32f4 ARM: dts: stm32: add CAN support on stm32f429 dt-bindings: net: can: add STM32 bxcan DT bindings dt-bindings: arm: stm32: add compatible for syscon gcan node can: isotp: add module parameter for maximum pdu size ==================== Link: https://lore.kernel.org/r/20230404145908.1714400-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-05selftests/bpf: Wait for receive in cg_storage_multi testYiFei Zhu
In some cases the loopback latency might be large enough, causing the assertion on invocations to be run before ingress prog getting executed. The assertion would fail and the test would flake. This can be reliably reproduced by arbitrarily increasing the loopback latency (thanks to [1]): tc qdisc add dev lo root handle 1: htb default 12 tc class add dev lo parent 1:1 classid 1:12 htb rate 20kbps ceil 20kbps tc qdisc add dev lo parent 1:12 netem delay 100ms Fix this by waiting on the receive end, instead of instantly returning to the assert. The call to read() will wait for the default SO_RCVTIMEO timeout of 3 seconds provided by start_server(). [1] https://gist.github.com/kstevens715/4598301 Reported-by: Martin KaFai Lau <martin.lau@linux.dev> Link: https://lore.kernel.org/bpf/9c5c8b7e-1d89-a3af-5400-14fde81f4429@linux.dev/ Fixes: 3573f384014f ("selftests/bpf: Test CGROUP_STORAGE behavior on shared egress + ingress") Acked-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: YiFei Zhu <zhuyifei@google.com> Link: https://lore.kernel.org/r/20230405193354.1956209-1-zhuyifei@google.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-04-05selftests: xsk: Deflakify STATS_RX_DROPPED testKal Conley
Fix flaky STATS_RX_DROPPED test. The receiver calls getsockopt after receiving the last (valid) packet which is not the final packet sent in the test (valid and invalid packets are sent in alternating fashion with the final packet being invalid). Since the last packet may or may not have been dropped already, both outcomes must be allowed. This issue could also be fixed by making sure the last packet sent is valid. This alternative is left as an exercise to the reader (or the benevolent maintainers of this file). This problem was quite visible on certain setups. On one machine this failure was observed 50% of the time. Also, remove a redundant assignment of pkt_stream->nb_pkts. This field is already initialized by __pkt_stream_alloc. Fixes: 27e934bec35b ("selftests: xsk: make stat tests not spin on getsockopt") Signed-off-by: Kal Conley <kal.conley@dectris.com> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/r/20230403120400.31018-1-kal.conley@dectris.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-04-05selftests: xsk: Disable IPv6 on VETH1Kal Conley
This change fixes flakiness in the BIDIRECTIONAL test: # [is_pkt_valid] expected length [60], got length [90] not ok 1 FAIL: SKB BUSY-POLL BIDIRECTIONAL When IPv6 is enabled, the interface will periodically send MLDv1 and MLDv2 packets. These packets can cause the BIDIRECTIONAL test to fail since it uses VETH0 for RX. For other tests, this was not a problem since they only receive on VETH1 and IPv6 was already disabled on VETH0. Fixes: a89052572ebb ("selftests/bpf: Xsk selftests framework") Signed-off-by: Kal Conley <kal.conley@dectris.com> Link: https://lore.kernel.org/r/20230405082905.6303-1-kal.conley@dectris.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-04-05Merge tag 'drm-misc-fixes-2023-04-05' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Short summary of fixes pull: * ivpu: DMA fence and suspend fixes * nouveau: Color-depth fixes * panfrost: Fix mmap error handling Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230405182855.GA1551@linux-uq9g
2023-04-05Merge branch 'selftests: xsk: Add test case for packets at end of UMEM'Martin KaFai Lau
Kal Conley says: ==================== This patchset fixes a minor bug in xskxceiver.c then adds a test case for valid packets at the end of the UMEM. ==================== Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-04-05selftests: xsk: Add test case for packets at end of UMEMKal Conley
Add test case to testapp_invalid_desc for valid packets at the end of the UMEM. Signed-off-by: Kal Conley <kal.conley@dectris.com> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/r/20230403145047.33065-3-kal.conley@dectris.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-04-05selftests: xsk: Use correct UMEM size in testapp_invalid_descKal Conley
Avoid UMEM_SIZE macro in testapp_invalid_desc which is incorrect when the frame size is not XSK_UMEM__DEFAULT_FRAME_SIZE. Also remove the macro since it's no longer being used. Fixes: 909f0e28207c ("selftests: xsk: Add tests for 2K frame size") Signed-off-by: Kal Conley <kal.conley@dectris.com> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/r/20230403145047.33065-2-kal.conley@dectris.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-04-05ACPI: video: Add acpi_backlight=video quirk for Lenovo ThinkPad W530Hans de Goede
The Lenovo ThinkPad W530 uses a nvidia k1000m GPU. When this gets used together with one of the older nvidia binary driver series (the latest series does not support it), then backlight control does not work. This is caused by commit 3dbc80a3e4c5 ("ACPI: video: Make backlight class device registration a separate step (v2)") combined with commit 5aa9d943e9b6 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default"). After these changes the acpi_video# backlight device is only registered when requested by a GPU driver calling acpi_video_register_backlight() which the nvidia binary driver does not do. I realize that using the nvidia binary driver is not a supported use-case and users can workaround this by adding acpi_backlight=video on the kernel commandline, but the ThinkPad W530 is a popular model under Linux users, so it seems worthwhile to add a quirk for this. I will also email Nvidia asking them to make the driver call acpi_video_register_backlight() when an internal LCD panel is detected. So maybe the next maintenance release of the drivers will fix this... Fixes: 5aa9d943e9b6 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default") Cc: All applicable <stable@vger.kernel.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-04-05ACPI: video: Add acpi_backlight=video quirk for Apple iMac14,1 and iMac14,2Hans de Goede
On the Apple iMac14,1 and iMac14,2 all-in-ones (monitors with builtin "PC") the connection between the GPU and the panel is seen by the GPU driver as regular DP instead of eDP, causing the GPU driver to never call acpi_video_register_backlight(). (GPU drivers only call acpi_video_register_backlight() when an internal panel is detected, to avoid non working acpi_video# devices getting registered on desktops which unfortunately is a real issue.) Fix the missing acpi_video# backlight device on these all-in-ones by adding a acpi_backlight=video DMI quirk, so that video.ko will immediately register the backlight device instead of waiting for an acpi_video_register_backlight() call. Fixes: 5aa9d943e9b6 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default") Cc: All applicable <stable@vger.kernel.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-04-05ACPI: video: Make acpi_backlight=video work independent from GPU driverHans de Goede
Commit 3dbc80a3e4c5 ("ACPI: video: Make backlight class device registration a separate step (v2)") combined with commit 5aa9d943e9b6 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default") Means that the video.ko code now fully depends on the GPU driver calling acpi_video_register_backlight() for the acpi_video# backlight class devices to get registered. This means that if the GPU driver does not do this, acpi_backlight=video on the cmdline, or DMI quirks for selecting acpi_video# will not work. This is a problem on for example Apple iMac14,1 all-in-ones where the monitor's LCD panel shows up as a regular DP connection instead of eDP so the GPU driver will not call acpi_video_register_backlight() [1]. Fix this by making video.ko directly register the acpi_video# devices when these have been explicitly requested either on the cmdline or through DMI quirks (rather then auto-detection being used). [1] GPU drivers only call acpi_video_register_backlight() when an internal panel is detected, to avoid non working acpi_video# devices getting registered on desktops which unfortunately is a real issue. Fixes: 5aa9d943e9b6 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default") Cc: All applicable <stable@vger.kernel.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-04-05ACPI: video: Add auto_detect arg to __acpi_video_get_backlight_type()Hans de Goede
Allow callers of __acpi_video_get_backlight_type() to pass a pointer to a bool which will get set to false if the backlight-type comes from the cmdline or a DMI quirk and set to true if auto-detection was used. And make __acpi_video_get_backlight_type() non static so that it can be called directly outside of video_detect.c . While at it turn the acpi_video_get_backlight_type() and acpi_video_backlight_use_native() wrappers into static inline functions in include/acpi/video.h, so that we need to export one less symbol. Fixes: 5aa9d943e9b6 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default") Cc: All applicable <stable@vger.kernel.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-04-05selftests: xsk: Add xskxceiver.h dependency to MakefileKal Conley
xskxceiver depends on xskxceiver.h so tell make about it. Signed-off-by: Kal Conley <kal.conley@dectris.com> Link: https://lore.kernel.org/r/20230403130151.31195-1-kal.conley@dectris.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-04-05usb: cdnsp: Fixes error: uninitialized symbol 'len'Pawel Laszczak
The patch 5bc38d33a5a1: "usb: cdnsp: Fixes issue with redundant Status Stage" leads to the following Smatch static checker warning: drivers/usb/cdns3/cdnsp-ep0.c:470 cdnsp_setup_analyze() error: uninitialized symbol 'len'. cc: <stable@vger.kernel.org> Fixes: 5bc38d33a5a1 ("usb: cdnsp: Fixes issue with redundant Status Stage") Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20230331090600.454674-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-05cifs: sanitize paths in cifs_update_super_prepath.Thiago Rafael Becker
After a server reboot, clients are failing to move files with ENOENT. This is caused by DFS referrals containing multiple separators, which the server move call doesn't recognize. v1: Initial patch. v2: Move prototype to header. Link: https://bugzilla.redhat.com/show_bug.cgi?id=2182472 Fixes: a31080899d5f ("cifs: sanitize multiple delimiters in prepath") Actually-Fixes: 24e0a1eff9e2 ("cifs: switch to new mount api") Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Thiago Rafael Becker <tbecker@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-04-05usb: gadgetfs: Fix ep_read_iter to handle ITER_UBUFSandeep Dhavale
iov_iter for ep_read_iter can be ITER_UBUF with io_uring. In that case dup_iter() does not have to allocate iov and it can return NULL. Fix the assumption by checking for iter_is_ubuf() other wise ep_read_iter can treat this as failure and return -ENOMEM. Fixes: 1e23db450cff ("io_uring: use iter_ubuf for single range imports") Signed-off-by: Sandeep Dhavale <dhavale@google.com> Acked-by: Jens Axboe <axboe@kernel.dk> Link: https://lore.kernel.org/r/20230401060509.3608259-3-dhavale@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-07-19 18:58:00 +0000