summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-05-03ARM: dts: Group omap3 CM_CLKSEL1_PLL clocksTony Lindgren
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_CLKSEL_WKUP clocksTony Lindgren
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_ICLKEN_WKUP clocksTony Lindgren
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_FCLKEN_WKUP clocksTony Lindgren
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_CLKSEL_CORE clocksTony Lindgren
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_ICLKEN3_CORE clocksTony Lindgren
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_ICLKEN1_CORE clocksTony Lindgren
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 crypto accelerator clocksTony Lindgren
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CM_FCLKEN1_CORE clocksTony Lindgren
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CONTROL_DEVCONF1 clocksTony Lindgren
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: Group omap3 CONTROL_DEVCONF0 clocksTony Lindgren
The clksel related registers on omap3 cause unique_unit_address and node_name_chars_strict warnings with the W=1 or W=2 make flags enabled. With the clock drivers updated, we can now avoid most of these warnings by grouping the TI component clocks using the TI clksel binding, and with the use of clock-output-names property to avoid non-standard node names for the clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: am43xx: Add i2c voltage scaling firmware to wkup_m3_ipcDave Gerlach
Add appropriate firmware-name property for all am43xx platforms. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> [dfustini: change property from 'ti,scale-data-fw' to 'firmware-name'] Signed-off-by: Drew Fustini <dfustini@baylibre.com> Message-Id: <20220502021508.1342869-4-dfustini@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: am33xx: Add i2c voltage scaling firmware to wkup_m3_ipcDave Gerlach
Add appropriate firmware-name property for all am33xx platforms. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> [dfustini: change property from 'ti,scale-data-fw' to 'firmware-name'] Signed-off-by: Drew Fustini <dfustini@baylibre.com> Message-Id: <20220502021508.1342869-3-dfustini@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-05-03ARM: dts: am437x-gp-evm: Enable wkup_m3 control of IO isolationDave Gerlach
With this flag wkup_m3 is able to control IO isolation during suspend on the board. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Drew Fustini <dfustini@baylibre.com> Message-Id: <20220502021508.1342869-2-dfustini@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-04-29ARM: dts: am335x-myirtech: Update NAND default partition table layoutAlexander Shiyan
This patch replaces the legacy partition table layout with a modern style. As an additional change, we are reserving space for three backup MLO entries and increasing space for the main bootloader. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Message-Id: <20220427081914.6773-2-eagle.alexander923@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-04-29ARM: dts: am335x-myirtech: Add an external clock oscillator for CPU RTCAlexander Shiyan
The CPU RTC has an external crystal, so to keep time, let's define it for devicetree. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Message-Id: <20220427081914.6773-1-eagle.alexander923@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-04-21ARM: dts: am335x-baltos: update MPU regulator rangeYegor Yefremov
Update the max MPU voltage range to align with the maximum possible value allowed in the operating-points table, which is max target voltage of 132500 uV + 2%. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Message-Id: <20220419143923.25196-1-yegorslists@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-04-21ARM: dts: am335x: Guardian: Update commentsGireesh Hiremath
* Add comment to improve readability Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com> Message-Id: <20220325100613.1494-16-Gireesh.Hiremath@in.bosch.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-04-21ARM: dts: am335x: Guardian: Add gpio line manesGireesh Hiremath
* assign name to gpio line Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com> Message-Id: <20220325100613.1494-15-Gireesh.Hiremath@in.bosch.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-04-21ARM: dts: am335x: Guardian: Update interface pinmuxGireesh Hiremath
* Update interface pinmux for - poweroff button - battery and coincell enable - ASP and Miraculix Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com> Message-Id: <20220325100613.1494-14-Gireesh.Hiremath@in.bosch.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-04-21ARM: dts: am335x: Guardian: Disable DMA property of USB1Gireesh Hiremath
* Dispble DMA property of USB1 Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com> Message-Id: <20220325100613.1494-13-Gireesh.Hiremath@in.bosch.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-04-21ARM: dts: am335x: Guardian: Enable UART port twoGireesh Hiremath
* Add support for uart2 port Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com> Message-Id: <20220325100613.1494-12-Gireesh.Hiremath@in.bosch.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-04-21ARM: dts: am335x: Guardian: Update backlight parameterGireesh Hiremath
* Update default brightness and dimming frequency * Enable current sink, while initialization Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com> Message-Id: <20220325100613.1494-11-Gireesh.Hiremath@in.bosch.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-04-21ARM: dts: am335x: Guardian: Add lcd portGireesh Hiremath
* Add port to the node lcdc Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com> Message-Id: <20220325100613.1494-10-Gireesh.Hiremath@in.bosch.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-04-21ARM: dts: am335x: Guardian: Update regulator node nameGireesh Hiremath
* Update mmcsd voltage regulator node name Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com> Message-Id: <20220325100613.1494-9-Gireesh.Hiremath@in.bosch.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-04-21ARM: dts: am335x: Guardian: Update beeper labelGireesh Hiremath
* Update lable pwm to guardian beeper Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com> Message-Id: <20220325100613.1494-8-Gireesh.Hiremath@in.bosch.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-04-21ARM: dts: am335x: Guardian: Update life ledGireesh Hiremath
* update life led label and pin number Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com> Message-Id: <20220325100613.1494-7-Gireesh.Hiremath@in.bosch.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-04-21ARM: dts: am335x: Guardian: Remove mmc status ledGireesh Hiremath
* MMC presence indicater LED removed from Guardian Board Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com> Message-Id: <20220325100613.1494-6-Gireesh.Hiremath@in.bosch.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-04-21ARM: dts: am335x: Guardian: Disable poweroff support from RTCGireesh Hiremath
* Disabling poweroff support form RTC will allow poweroff to handle from other machanism Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com> Message-Id: <20220325100613.1494-5-Gireesh.Hiremath@in.bosch.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-04-21ARM: dts: am335x: Guardian: Add keypadGireesh Hiremath
* Add support to guardian mt gpio keypad Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com> Message-Id: <20220325100613.1494-4-Gireesh.Hiremath@in.bosch.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-04-21ARM: dts: am335x: Guardian: Rename power button labelGireesh Hiremath
* Rename label button to power button Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com> Message-Id: <20220325100613.1494-3-Gireesh.Hiremath@in.bosch.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-04-21ARM: dts: am335x: Guardian: Update NAND partition tableGireesh Hiremath
* Update partition table to save env and splash image * GPMC config values optimized for Bosch Guardian Board * NAND Chip used by Bosch Guardian Board is Micron MT29F4G08ABBFA Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com> Message-Id: <20220325100613.1494-2-Gireesh.Hiremath@in.bosch.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-04-21ARM: dts: logicpd-som-lv: Move pinmuxing to peripheral nodesAdam Ford
Move some pinmux references to their respective peripherals. This keeps the pins in safe-mode until they are requested. Signed-off-by: Adam Ford <aford173@gmail.com> Message-Id: <20220303171818.11060-2-aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-04-21ARM: dts: omap3/4/5: fix ethernet node name for different OMAP boardsOleksij Rempel
The node name of Ethernet controller should be "ethernet" instead of "usbether" as required by Ethernet controller devicetree schema: Documentation/devicetree/bindings/net/ethernet-controller.yaml This patch can potentially affect boot loaders patching against full node path instead of using device aliases. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Message-Id: <20220216074927.3619425-8-o.rempel@pengutronix.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-04-11ARM: dts: Drop custom clkctrl compatible and update omap5 l4perTony Lindgren
We can now use the clock-output-names and don't need custom compatible values for each clkctrl instance. And we can use a generic name also for the clock manager instance. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Message-Id: <20220204084339.12341-5-tony@atomide.com>
2022-04-11ARM: dts: Add clock-output-names for omap5Tony Lindgren
To stop using the non-standard node name based clock naming, let's first add the clock-output-names property. This allows us to stop using the internal legacy clock naming and unify the naming for the TI SoCs in the following patches. Note that we must wait on fixing the node naming issues until after the internal clock names have been updated to avoid adding name translation unnecessarily. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Message-Id: <20220204084339.12341-4-tony@atomide.com>
2022-04-11ARM: dts: Drop custom clkctrl compatible and update omap4 l4perTony Lindgren
We can now use the clock-output-names and don't need custom compatible values for each clkctrl instance. And we can use a generic name also for the clock manager instance. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Message-Id: <20220204084339.12341-3-tony@atomide.com>
2022-04-11ARM: dts: Add clock-output-names for omap4Tony Lindgren
To stop using the non-standard node name based clock naming, let's first add the clock-output-names property. This allows us to stop using the internal legacy clock naming and unify the naming for the TI SoCs in the following patches. Note that we must wait on fixing the node naming issues until after the internal clock names have been updated to avoid adding name translation unnecessarily. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Message-Id: <20220204084339.12341-2-tony@atomide.com>
2022-04-11ARM: dts: Use clock-output-names for am4Tony Lindgren
With the TI clocks supporting the use of clock-output-names devicetree property, we no longer need to use non-standard node names for clocks. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Message-Id: <20220204081529.57694-1-tony@atomide.com>
2022-04-11ARM: dts: Use clock-output-names for dra7Tony Lindgren
With the TI clocks supporting the use of clock-output-names devicetree property, we no longer need to use non-standard node names for clocks. Depends-on: 31aa7056bbec ("ARM: dts: Don't use legacy clock defines for dra7 clkctrl") Depends-on: 9206a3af4fc0 ("clk: ti: Move dra7 clock devices out of the legacy section") Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Message-Id: <20220204080842.40673-1-tony@atomide.com>
2022-04-11ARM: dts: Use clock-output-names for am3Tony Lindgren
With the TI clocks supporting the use of clock-output-names devicetree property, we no longer need to use non-standard node names for clocks. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Message-Id: <20220204073333.18175-5-tony@atomide.com>
2022-04-11ARM: dts: Add clksel node for am3 clkoutTony Lindgren
Let's add a clksel node for the component clocks to avoid devicetree unique_unit_address warnings. The component clocks can now get IO address from the parent clksel node. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Message-Id: <20220204073333.18175-4-tony@atomide.com>
2022-04-11ARM: dts: Add clksel node for am3 gfxTony Lindgren
Let's add a clksel node for the component clocks to avoid devicetree unique_unit_address warnings. The component clocks can now get IO address from the parent clksel node. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Message-Id: <20220204073333.18175-3-tony@atomide.com>
2022-04-11ARM: dts: Add clksel node for am3 ehrpwmTony Lindgren
Let's add a clksel node for the component clocks to avoid devicetree unique_unit_address warnings. The component clocks can now get IO address from the parent clksel node. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Message-Id: <20220204073333.18175-2-tony@atomide.com>
2022-04-08iommu/omap: Fix regression in probe for NULL pointer dereferenceTony Lindgren
Commit 3f6634d997db ("iommu: Use right way to retrieve iommu_ops") started triggering a NULL pointer dereference for some omap variants: __iommu_probe_device from probe_iommu_group+0x2c/0x38 probe_iommu_group from bus_for_each_dev+0x74/0xbc bus_for_each_dev from bus_iommu_probe+0x34/0x2e8 bus_iommu_probe from bus_set_iommu+0x80/0xc8 bus_set_iommu from omap_iommu_init+0x88/0xcc omap_iommu_init from do_one_initcall+0x44/0x24 This is caused by omap iommu probe returning 0 instead of ERR_PTR(-ENODEV) as noted by Jason Gunthorpe <jgg@ziepe.ca>. Looks like the regression already happened with an earlier commit 6785eb9105e3 ("iommu/omap: Convert to probe/release_device() call-backs") that changed the function return type and missed converting one place. Cc: Drew Fustini <dfustini@baylibre.com> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: Suman Anna <s-anna@ti.com> Suggested-by: Jason Gunthorpe <jgg@ziepe.ca> Fixes: 6785eb9105e3 ("iommu/omap: Convert to probe/release_device() call-backs") Fixes: 3f6634d997db ("iommu: Use right way to retrieve iommu_ops") Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Drew Fustini <dfustini@baylibre.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20220331062301.24269-1-tony@atomide.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-04-03Linux 5.18-rc1Linus Torvalds
2022-04-03Merge tag 'trace-v5.18-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull more tracing updates from Steven Rostedt: - Rename the staging files to give them some meaning. Just stage1,stag2,etc, does not show what they are for - Check for NULL from allocation in bootconfig - Hold event mutex for dyn_event call in user events - Mark user events to broken (to work on the API) - Remove eBPF updates from user events - Remove user events from uapi header to keep it from being installed. - Move ftrace_graph_is_dead() into inline as it is called from hot paths and also convert it into a static branch. * tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Move user_events.h temporarily out of include/uapi ftrace: Make ftrace_graph_is_dead() a static branch tracing: Set user_events to BROKEN tracing/user_events: Remove eBPF interfaces tracing/user_events: Hold event_mutex during dyn_event_add proc: bootconfig: Add null pointer check tracing: Rename the staging files for trace_events
2022-04-03Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "A single revert to fix a boot regression seen when clk_put() started dropping rate range requests. It's best to keep various systems booting so we'll kick this out and try again next time" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: Revert "clk: Drop the rate range on clk_put()"
2022-04-03Merge tag 'x86-urgent-2022-04-03' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of x86 fixes and updates: - Make the prctl() for enabling dynamic XSTATE components correct so it adds the newly requested feature to the permission bitmap instead of overwriting it. Add a selftest which validates that. - Unroll string MMIO for encrypted SEV guests as the hypervisor cannot emulate it. - Handle supervisor states correctly in the FPU/XSTATE code so it takes the feature set of the fpstate buffer into account. The feature sets can differ between host and guest buffers. Guest buffers do not contain supervisor states. So far this was not an issue, but with enabling PASID it needs to be handled in the buffer offset calculation and in the permission bitmaps. - Avoid a gazillion of repeated CPUID invocations in by caching the values early in the FPU/XSTATE code. - Enable CONFIG_WERROR in x86 defconfig. - Make the X86 defconfigs more useful by adapting them to Y2022 reality" * tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu/xstate: Consolidate size calculations x86/fpu/xstate: Handle supervisor states in XSTATE permissions x86/fpu/xsave: Handle compacted offsets correctly with supervisor states x86/fpu: Cache xfeature flags from CPUID x86/fpu/xsave: Initialize offset/size cache early x86/fpu: Remove unused supervisor only offsets x86/fpu: Remove redundant XCOMP_BV initialization x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO x86/config: Make the x86 defconfigs a bit more usable x86/defconfig: Enable WERROR selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation
2022-04-03Merge tag 'core-urgent-2022-04-03' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RT signal fix from Thomas Gleixner: "Revert the RT related signal changes. They need to be reworked and generalized" * tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"
generated by cgit (git 2.34.1) at 2025-07-15 09:50:26 +0000