summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-11-02drm/amd/display: Investigate tool reported FCLK P-state deviationsNevenko Stupar
[Why] Fix for some of the tool reported modes for FCLK P-state deviations and UCLK P-state deviations that are coming from DSC terms and/or Scaling terms causing MinActiveFCLKChangeLatencySupported and MaxActiveDRAMClockChangeLatencySupported incorrectly calculated in DML for these configurations. Reviewed-by: Chaitanya Dhere <Chaitanya.Dhere@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-02drm/amd/display: Add DSC delay factor workaroundGeorge Shen
[Why] Certain 4K high refresh rate modes requiring DSC are exhibiting top of screen underflow corruption. Increasing the DSC delay by a factor of 6 percent stops the underflow for most use cases. [How] Multiply DSC delay requirement in DML by a factor. Add debug option to make this DSC delay factor configurable. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-02drm/amd/display: Round up DST_after_scaler to nearest intGeorge Shen
[Why] The DST_after_scaler value that DML spreadsheet outputs is generally the driver value round up to the nearest int. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-02drm/amd/display: Use forced DSC bpp in DMLGeorge Shen
[Why] DSC config is calculated separately from DML calculations. DML should use these separately calculated DSC params. The issue is that the calculated bpp is not properly propagated into DML. [How] Correctly used forced_bpp value in DML. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-02drm/amd/display: Fix DCN32 DSC delay calculationGeorge Shen
[Why] DCN32 DSC delay calculation had an unintentional integer division, resulting in a mismatch against the DML spreadsheet. [How] Cast numerator to double before performing the division. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-02drm/amdgpu: Disable GPU reset on SRIOV before remove pci.Gavin Wan
The recent change brought a bug on SRIOV envrionment. It caused unloading amdgpu failed on Guest VM. The reason is that the VF FLR was requested while unloading amdgpu driver, but the VF FLR of SRIOV sequence is wrong while removing PCI device. For SRIOV, the guest driver should not trigger the whole XGMI hive to do the reset. Host driver control how the device been reset. Fixes: f5c7e7797060 ("drm/amdgpu: Adjust removal control flow for smu v13_0_2") Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by: Gavin Wan <Gavin.Wan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-02drm/amdgpu: disable GFXOFF during compute for GFX11Graham Sider
Temporary workaround to fix issues observed in some compute applications when GFXOFF is enabled on GFX11. Signed-off-by: Graham Sider <Graham.Sider@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-02Bluetooth: hci_conn: Fix not restoring ISO buffer count on disconnectLuiz Augusto von Dentz
When disconnecting an ISO link the controller may not generate HCI_EV_NUM_COMP_PKTS for unacked packets which needs to be restored in hci_conn_del otherwise the host would assume they are still in use and would not be able to use all the buffers available. Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Frédéric Danis <frederic.danis@collabora.com>
2022-11-02Bluetooth: L2CAP: Fix memory leak in vhci_writeHawkins Jiawei
Syzkaller reports a memory leak as follows: ==================================== BUG: memory leak unreferenced object 0xffff88810d81ac00 (size 240): [...] hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff838733d9>] __alloc_skb+0x1f9/0x270 net/core/skbuff.c:418 [<ffffffff833f742f>] alloc_skb include/linux/skbuff.h:1257 [inline] [<ffffffff833f742f>] bt_skb_alloc include/net/bluetooth/bluetooth.h:469 [inline] [<ffffffff833f742f>] vhci_get_user drivers/bluetooth/hci_vhci.c:391 [inline] [<ffffffff833f742f>] vhci_write+0x5f/0x230 drivers/bluetooth/hci_vhci.c:511 [<ffffffff815e398d>] call_write_iter include/linux/fs.h:2192 [inline] [<ffffffff815e398d>] new_sync_write fs/read_write.c:491 [inline] [<ffffffff815e398d>] vfs_write+0x42d/0x540 fs/read_write.c:578 [<ffffffff815e3cdd>] ksys_write+0x9d/0x160 fs/read_write.c:631 [<ffffffff845e0645>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff845e0645>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff84600087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd ==================================== HCI core will uses hci_rx_work() to process frame, which is queued to the hdev->rx_q tail in hci_recv_frame() by HCI driver. Yet the problem is that, HCI core may not free the skb after handling ACL data packets. To be more specific, when start fragment does not contain the L2CAP length, HCI core just copies skb into conn->rx_skb and finishes frame process in l2cap_recv_acldata(), without freeing the skb, which triggers the above memory leak. This patch solves it by releasing the relative skb, after processing the above case in l2cap_recv_acldata(). Fixes: 4d7ea8ee90e4 ("Bluetooth: L2CAP: Fix handling fragmented length") Link: https://lore.kernel.org/all/0000000000000d0b1905e6aaef64@google.com/ Reported-and-tested-by: syzbot+8f819e36e01022991cfa@syzkaller.appspotmail.com Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-11-02Bluetooth: L2CAP: fix use-after-free in l2cap_conn_del()Zhengchao Shao
When l2cap_recv_frame() is invoked to receive data, and the cid is L2CAP_CID_A2MP, if the channel does not exist, it will create a channel. However, after a channel is created, the hold operation of the channel is not performed. In this case, the value of channel reference counting is 1. As a result, after hci_error_reset() is triggered, l2cap_conn_del() invokes the close hook function of A2MP to release the channel. Then l2cap_chan_unlock(chan) will trigger UAF issue. The process is as follows: Receive data: l2cap_data_channel() a2mp_channel_create() --->channel ref is 2 l2cap_chan_put() --->channel ref is 1 Triger event: hci_error_reset() hci_dev_do_close() ... l2cap_disconn_cfm() l2cap_conn_del() l2cap_chan_hold() --->channel ref is 2 l2cap_chan_del() --->channel ref is 1 a2mp_chan_close_cb() --->channel ref is 0, release channel l2cap_chan_unlock() --->UAF of channel The detailed Call Trace is as follows: BUG: KASAN: use-after-free in __mutex_unlock_slowpath+0xa6/0x5e0 Read of size 8 at addr ffff8880160664b8 by task kworker/u11:1/7593 Workqueue: hci0 hci_error_reset Call Trace: <TASK> dump_stack_lvl+0xcd/0x134 print_report.cold+0x2ba/0x719 kasan_report+0xb1/0x1e0 kasan_check_range+0x140/0x190 __mutex_unlock_slowpath+0xa6/0x5e0 l2cap_conn_del+0x404/0x7b0 l2cap_disconn_cfm+0x8c/0xc0 hci_conn_hash_flush+0x11f/0x260 hci_dev_close_sync+0x5f5/0x11f0 hci_dev_do_close+0x2d/0x70 hci_error_reset+0x9e/0x140 process_one_work+0x98a/0x1620 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 </TASK> Allocated by task 7593: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0xa9/0xd0 l2cap_chan_create+0x40/0x930 amp_mgr_create+0x96/0x990 a2mp_channel_create+0x7d/0x150 l2cap_recv_frame+0x51b8/0x9a70 l2cap_recv_acldata+0xaa3/0xc00 hci_rx_work+0x702/0x1220 process_one_work+0x98a/0x1620 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 Freed by task 7593: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 ____kasan_slab_free+0x167/0x1c0 slab_free_freelist_hook+0x89/0x1c0 kfree+0xe2/0x580 l2cap_chan_put+0x22a/0x2d0 l2cap_conn_del+0x3fc/0x7b0 l2cap_disconn_cfm+0x8c/0xc0 hci_conn_hash_flush+0x11f/0x260 hci_dev_close_sync+0x5f5/0x11f0 hci_dev_do_close+0x2d/0x70 hci_error_reset+0x9e/0x140 process_one_work+0x98a/0x1620 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 Last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0xbe/0xd0 call_rcu+0x99/0x740 netlink_release+0xe6a/0x1cf0 __sock_release+0xcd/0x280 sock_close+0x18/0x20 __fput+0x27c/0xa90 task_work_run+0xdd/0x1a0 exit_to_user_mode_prepare+0x23c/0x250 syscall_exit_to_user_mode+0x19/0x50 do_syscall_64+0x42/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Second to last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0xbe/0xd0 call_rcu+0x99/0x740 netlink_release+0xe6a/0x1cf0 __sock_release+0xcd/0x280 sock_close+0x18/0x20 __fput+0x27c/0xa90 task_work_run+0xdd/0x1a0 exit_to_user_mode_prepare+0x23c/0x250 syscall_exit_to_user_mode+0x19/0x50 do_syscall_64+0x42/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: d0be8347c623 ("Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-11-02Bluetooth: virtio_bt: Use skb_put to set lengthSoenke Huster
By using skb_put we ensure that skb->tail is set correctly. Currently, skb->tail is always zero, which leads to errors, such as the following page fault in rfcomm_recv_frame: BUG: unable to handle page fault for address: ffffed1021de29ff #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page RIP: 0010:rfcomm_run+0x831/0x4040 (net/bluetooth/rfcomm/core.c:1751) Fixes: afd2daa26c7a ("Bluetooth: Add support for virtio transport driver") Signed-off-by: Soenke Huster <soenke.huster@eknoes.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-11-02Bluetooth: hci_conn: Fix CIS connection dst_type handlingPauli Virtanen
hci_connect_cis and iso_connect_cis call hci_bind_cis inconsistently with dst_type being either ISO socket address type or the HCI type, but these values cannot be mixed like this. Fix this by using only the HCI type. CIS connection dst_type was also not initialized in hci_bind_cis, even though it is used in hci_conn_hash_lookup_cis to find existing connections. Set the value in hci_bind_cis, so that existing CIS connections are found e.g. when doing deferred socket connections, also when dst_type is not 0 (ADDR_LE_DEV_PUBLIC). Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-11-02Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sduMaxim Mikityanskiy
Fix the race condition between the following two flows that run in parallel: 1. l2cap_reassemble_sdu -> chan->ops->recv (l2cap_sock_recv_cb) -> __sock_queue_rcv_skb. 2. bt_sock_recvmsg -> skb_recv_datagram, skb_free_datagram. An SKB can be queued by the first flow and immediately dequeued and freed by the second flow, therefore the callers of l2cap_reassemble_sdu can't use the SKB after that function returns. However, some places continue accessing struct l2cap_ctrl that resides in the SKB's CB for a short time after l2cap_reassemble_sdu returns, leading to a use-after-free condition (the stack trace is below, line numbers for kernel 5.19.8). Fix it by keeping a local copy of struct l2cap_ctrl. BUG: KASAN: use-after-free in l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth Read of size 1 at addr ffff88812025f2f0 by task kworker/u17:3/43169 Workqueue: hci0 hci_rx_work [bluetooth] Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4)) print_report.cold (mm/kasan/report.c:314 mm/kasan/report.c:429) ? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth kasan_report (mm/kasan/report.c:162 mm/kasan/report.c:493) ? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth l2cap_rx (net/bluetooth/l2cap_core.c:7236 net/bluetooth/l2cap_core.c:7271) bluetooth ret_from_fork (arch/x86/entry/entry_64.S:306) </TASK> Allocated by task 43169: kasan_save_stack (mm/kasan/common.c:39) __kasan_slab_alloc (mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469) kmem_cache_alloc_node (mm/slab.h:750 mm/slub.c:3243 mm/slub.c:3293) __alloc_skb (net/core/skbuff.c:414) l2cap_recv_frag (./include/net/bluetooth/bluetooth.h:425 net/bluetooth/l2cap_core.c:8329) bluetooth l2cap_recv_acldata (net/bluetooth/l2cap_core.c:8442) bluetooth hci_rx_work (net/bluetooth/hci_core.c:3642 net/bluetooth/hci_core.c:3832) bluetooth process_one_work (kernel/workqueue.c:2289) worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2437) kthread (kernel/kthread.c:376) ret_from_fork (arch/x86/entry/entry_64.S:306) Freed by task 27920: kasan_save_stack (mm/kasan/common.c:39) kasan_set_track (mm/kasan/common.c:45) kasan_set_free_info (mm/kasan/generic.c:372) ____kasan_slab_free (mm/kasan/common.c:368 mm/kasan/common.c:328) slab_free_freelist_hook (mm/slub.c:1780) kmem_cache_free (mm/slub.c:3536 mm/slub.c:3553) skb_free_datagram (./include/net/sock.h:1578 ./include/net/sock.h:1639 net/core/datagram.c:323) bt_sock_recvmsg (net/bluetooth/af_bluetooth.c:295) bluetooth l2cap_sock_recvmsg (net/bluetooth/l2cap_sock.c:1212) bluetooth sock_read_iter (net/socket.c:1087) new_sync_read (./include/linux/fs.h:2052 fs/read_write.c:401) vfs_read (fs/read_write.c:482) ksys_read (fs/read_write.c:620) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) Link: https://lore.kernel.org/linux-bluetooth/CAKErNvoqga1WcmoR3-0875esY6TVWFQDandbVZncSiuGPBQXLA@mail.gmail.com/T/#u Fixes: d2a7ac5d5d3a ("Bluetooth: Add the ERTM receive state machine") Fixes: 4b51dae96731 ("Bluetooth: Add streaming mode receive and incoming packet classifier") Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-11-02drm/amd: Fail the suspend if resources can't be evictedMario Limonciello
If a system does not have swap and memory is under 100% usage, amdgpu will fail to evict resources. Currently the suspend carries on proceeding to reset the GPU: ``` [drm] evicting device resources failed [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <vcn_v3_0> failed -12 [drm] free PSP TMR buffer [TTM] Failed allocating page table [drm] evicting device resources failed amdgpu 0000:03:00.0: amdgpu: MODE1 reset amdgpu 0000:03:00.0: amdgpu: GPU mode1 reset amdgpu 0000:03:00.0: amdgpu: GPU smu mode1 reset ``` At this point if the suspend actually succeeded I think that amdgpu would have recovered because the GPU would have power cut off and restored. However the kernel fails to continue the suspend from the memory pressure and amdgpu fails to run the "resume" from the aborted suspend. ``` ACPI: PM: Preparing to enter system sleep state S3 SLUB: Unable to allocate memory on node -1, gfp=0xdc0(GFP_KERNEL|__GFP_ZERO) cache: Acpi-State, object size: 80, buffer size: 80, default order: 0, min order: 0 node 0: slabs: 22, objs: 1122, free: 0 ACPI Error: AE_NO_MEMORY, Could not update object reference count (20210730/utdelete-651) [drm:psp_hw_start [amdgpu]] *ERROR* PSP load kdb failed! [drm:psp_resume [amdgpu]] *ERROR* PSP resume failed [drm:amdgpu_device_fw_loading [amdgpu]] *ERROR* resume of IP block <psp> failed -62 amdgpu 0000:03:00.0: amdgpu: amdgpu_device_ip_resume failed (-62). PM: dpm_run_callback(): pci_pm_resume+0x0/0x100 returns -62 amdgpu 0000:03:00.0: PM: failed to resume async: error -62 ``` To avoid this series of unfortunate events, fail amdgpu's suspend when the memory eviction fails. This will let the system gracefully recover and the user can try suspend again when the memory pressure is relieved. Reported-by: post@davidak.de Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2223 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-02Merge tag 'juno-fix-6.1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Armv8 Juno fix for v6.1 Just a single fix to add the missing critical points in the thermal zones that has been mandatory in the binding but was enforced in the code recently. * tag 'juno-fix-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: dts: juno: Add thermal critical trip points Link: https://lore.kernel.org/r/20221102140156.2758137-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-02drm/amdkfd: Fix NULL pointer dereference in svm_migrate_to_ram()Yang Li
./drivers/gpu/drm/amd/amdkfd/kfd_migrate.c:985:58-62: ERROR: p is NULL but dereferenced. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2549 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-11-02drm/amdgpu: correct MES debugfs versionsGraham Sider
Use mes.sched_version, mes.kiq_version for debugfs as mes.ucode_fw_version does not contain correct versioning information. Signed-off-by: Graham Sider <Graham.Sider@amd.com> Reviewed-by: Jack Xiao <Jack.Xiao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-02drm/amdgpu: set fb_modifiers_not_supported in vkmsYifan Zhang
This patch to fix the gdm3 start failure with virual display: /usr/libexec/gdm-x-session[1711]: (II) AMDGPU(0): Setting screen physical size to 270 x 203 /usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): Failed to make import prime FD as pixmap: 22 /usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): failed to set mode: Invalid argument /usr/libexec/gdm-x-session[1711]: (WW) AMDGPU(0): Failed to set mode on CRTC 0 /usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): Failed to enable any CRTC gnome-shell[1840]: Running GNOME Shell (using mutter 42.2) as a X11 window and compositing manager /usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): failed to set mode: Invalid argument vkms doesn't have modifiers support, set fb_modifiers_not_supported to bring the gdm back. Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Acked-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Tim Huang <Tim.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-02drm/amd/display: cursor update command incompleteMax Tseng
Missing send cursor_rect width & Height into DMUB. PSR-SU would use these information. But missing these assignment in last refactor commit Reported-by: Timur Kristóf <timur.kristof@gmail.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2227 Fixes: b73353f7f3d4 ("drm/amd/display: Use the same cursor info across features") Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Max Tseng <max.tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-02drm/amd/display: Enable timing sync on DCN32Alvin Lee
Missed enabling timing sync on DCN32 because DCN32 has a different DML param. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-02Merge tag 'scmi-fixes-6.1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Arm SCMI fixes for v6.1 A bunch of fixes to handle: 1. A possible resource leak in scmi_remove(). The returned error value gets ignored by the driver core and can remove the device and free the devm-allocated resources. As a simple solution to be able to easily backport, the bind attributes in the driver is suppressed as there is no need to support it. Additionally the remove path is cleaned up by adding device links between the core and the protocol devices so that a proper and complete unbinding happens. 2. A possible spin-loop in the SCMI transmit path in case of misbehaving platform firmware. A timeout is added to the existing loop so that the SCMI stack can bailout aborting the transmission with warnings. 3. Optional Rx channel correctly by reporting any memory errors instead of ignoring the same with other allowed errors. 4. The use of proper device for all the device managed allocations in the virtio transport. 5. Incorrect deferred_tx_wq release on the error paths by using devres API(devm_add_action_or_reset) to manage the release in the error path. * tag 'scmi-fixes-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Fix deferred_tx_wq release on error paths firmware: arm_scmi: Fix devres allocation device in virtio transport firmware: arm_scmi: Make Rx chan_setup fail on memory errors firmware: arm_scmi: Make tx_prepare time out eventually firmware: arm_scmi: Suppress the driver's bind attributes firmware: arm_scmi: Cleanup the core driver removal callback Link: https://lore.kernel.org/r/20221102140142.2758107-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-02drm/amd/display: Set memclk levels to be at least 1 for dcn32Dillon Varone
[Why] Cannot report 0 memclk levels even when SMU does not provide any. [How] When memclk levels reported by SMU is 0, set levels to 1. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-02drm/amd/display: Update latencies on DCN321Dillon Varone
Update DF related latencies based on new measurements. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-02drm/amd/display: Limit dcn32 to 1950Mhz display clockJun Lei
[why] Hardware team recommends we limit dispclock to 1950Mhz for all DCN3.2.x [how] Limit to 1950 when initializing clocks. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-02drm/amd/display: Ignore Cable ID FeatureFangzhi Zuo
Ignore cable ID for DP2 receivers that does not support the feature. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-02drm/amd/display: Update DSC capabilitie for DCN314Leo Chen
dcn314 has 4 DSC - conflicted hardware document updated and confirmed. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-02Documentation: devres: add missing I2C helperYang Yingliang
Add missing devm_i2c_add_adapter() to devres.rst. It's introduced by commit 07740c92ae57 ("i2c: core: add managed function for adding i2c adapters"). Fixes: 07740c92ae57 ("i2c: core: add managed function for adding i2c adapters") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-11-02Merge tag 'parisc-for-6.1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: "This mostly handles oddities with the serial port 8250_gsc.c driver. Although the name suggests it's just for serial ports on the GSC bus (e.g. in older PA-RISC machines), it handles serial ports on PA-RISC PCI devices (e.g. on the SuperIO chip) as well. Thus this renames the driver to 8250_parisc and fixes the config dependencies. The other change is a cleanup on how the device IDs of devices in a PA-RISC machine are shown at startup" * tag 'parisc-for-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Avoid printing the hardware path twice parisc: Export iosapic_serial_irq() symbol for serial port driver MAINTAINERS: adjust entry after renaming parisc serial driver parisc: Use signed char for hardware path in pdc.h parisc/serial: Rename 8250_gsc.c to 8250_parisc.c parisc: Make 8250_gsc driver dependend on CONFIG_PARISC
2022-11-02netfilter: ipset: enforce documented limit to prevent allocating huge memoryJozsef Kadlecsik
Daniel Xu reported that the hash:net,iface type of the ipset subsystem does not limit adding the same network with different interfaces to a set, which can lead to huge memory usage or allocation failure. The quick reproducer is $ ipset create ACL.IN.ALL_PERMIT hash:net,iface hashsize 1048576 timeout 0 $ for i in $(seq 0 100); do /sbin/ipset add ACL.IN.ALL_PERMIT 0.0.0.0/0,kaf_$i timeout 0 -exist; done The backtrace when vmalloc fails: [Tue Oct 25 00:13:08 2022] ipset: vmalloc error: size 1073741848, exceeds total pages <...> [Tue Oct 25 00:13:08 2022] Call Trace: [Tue Oct 25 00:13:08 2022] <TASK> [Tue Oct 25 00:13:08 2022] dump_stack_lvl+0x48/0x60 [Tue Oct 25 00:13:08 2022] warn_alloc+0x155/0x180 [Tue Oct 25 00:13:08 2022] __vmalloc_node_range+0x72a/0x760 [Tue Oct 25 00:13:08 2022] ? hash_netiface4_add+0x7c0/0xb20 [Tue Oct 25 00:13:08 2022] ? __kmalloc_large_node+0x4a/0x90 [Tue Oct 25 00:13:08 2022] kvmalloc_node+0xa6/0xd0 [Tue Oct 25 00:13:08 2022] ? hash_netiface4_resize+0x99/0x710 <...> The fix is to enforce the limit documented in the ipset(8) manpage: > The internal restriction of the hash:net,iface set type is that the same > network prefix cannot be stored with more than 64 different interfaces > in a single set. Fixes: ccf0a4b7fc68 ("netfilter: ipset: Add bucketsize parameter to all hash types") Reported-by: Daniel Xu <dxu@dxuuu.xyz> Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-11-02Merge tag 'nfs-for-6.1-2' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Anna Schumaker: - Fix some coccicheck warnings - Avoid memcpy() run-time warning - Fix up various state reclaim / RECLAIM_COMPLETE errors - Fix a null pointer dereference in sysfs - Fix LOCK races - Fix gss_unwrap_resp_integ() crasher - Fix zero length clones - Fix memleak when allocate slot fails * tag 'nfs-for-6.1-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: nfs4: Fix kmemleak when allocate slot failed NFSv4.2: Fixup CLONE dest file size for zero-length count SUNRPC: Fix crasher in gss_unwrap_resp_integ() NFSv4: Retry LOCK on OLD_STATEID during delegation return SUNRPC: Fix null-ptr-deref when xps sysfs alloc failed NFSv4.1: We must always send RECLAIM_COMPLETE after a reboot NFSv4.1: Handle RECLAIM_COMPLETE trunking errors NFSv4: Fix a potential state reclaim deadlock NFS: Avoid memcpy() run-time warning for struct sockaddr overflows nfs: Remove redundant null checks before kfree
2022-11-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "Fix a few more of the usual sorts of bugs: - Another regression with source route validation in CMA, introduced this merge window - Crash in hfi1 due to faulty list operations - PCI ID updates for EFA - Disable LOCAL_INV in hns because it causes a HW hang - Crash in hns due to missing initialization - Memory leak in rxe - Missing error unwind during ib_core module loading - Missing error handling in qedr around work queue creation during startup" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/qedr: clean up work queue on failure in qedr_alloc_resources() RDMA/core: Fix null-ptr-deref in ib_core_cleanup() RDMA/rxe: Fix mr leak in RESPST_ERR_RNR RDMA/hns: Fix NULL pointer problem in free_mr_init() RDMA/hns: Disable local invalidate operation RDMA/efa: Add EFA 0xefa2 PCI ID IB/hfi1: Correctly move list in sc_disable() RDMA/cma: Use output interface for net_dev check
2022-11-02KVM: VMX: Ignore guest CPUID for host userspace writes to DEBUGCTLSean Christopherson
Ignore guest CPUID for host userspace writes to the DEBUGCTL MSR, KVM's ABI is that setting CPUID vs. state can be done in any order, i.e. KVM allows userspace to stuff MSRs prior to setting the guest's CPUID that makes the new MSR "legal". Keep the vmx_get_perf_capabilities() check for guest writes, even though it's technically unnecessary since the vCPU's PERF_CAPABILITIES is consulted when refreshing LBR support. A future patch will clean up vmx_get_perf_capabilities() to avoid the RDMSR on every call, at which point the paranoia will incur no meaningful overhead. Note, prior to vmx_get_perf_capabilities() checking that the host fully supports LBRs via x86_perf_get_lbr(), KVM effectively relied on intel_pmu_lbr_is_enabled() to guard against host userspace enabling LBRs on platforms without full support. Fixes: c646236344e9 ("KVM: vmx/pmu: Add PMU_CAP_LBR_FMT check when guest LBR is enabled") Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221006000314.73240-5-seanjc@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-02KVM: VMX: Fold vmx_supported_debugctl() into vcpu_supported_debugctl()Sean Christopherson
Fold vmx_supported_debugctl() into vcpu_supported_debugctl(), its only caller. Setting bits only to clear them a few instructions later is rather silly, and splitting the logic makes things seem more complicated than they actually are. Opportunistically drop DEBUGCTLMSR_LBR_MASK now that there's a single reference to the pair of bits. The extra layer of indirection provides no meaningful value and makes it unnecessarily tedious to understand what KVM is doing. No functional change. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221006000314.73240-4-seanjc@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-02KVM: VMX: Advertise PMU LBRs if and only if perf supports LBRsSean Christopherson
Advertise LBR support to userspace via MSR_IA32_PERF_CAPABILITIES if and only if perf fully supports LBRs. Perf may disable LBRs (by zeroing the number of LBRs) even on platforms the allegedly support LBRs, e.g. if probing any LBR MSRs during setup fails. Fixes: be635e34c284 ("KVM: vmx/pmu: Expose LBR_FMT in the MSR_IA32_PERF_CAPABILITIES") Reported-by: Like Xu <like.xu.linux@gmail.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221006000314.73240-3-seanjc@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-02btrfs: fix inode reserve space leak due to nowait buffered writeFilipe Manana
During a nowait buffered write, if we fail to balance dirty pages we exit btrfs_buffered_write() without releasing the delalloc space reserved for an extent, resulting in leaking space from the inode's block reserve. So fix that by releasing the delalloc space for the extent when balancing dirty pages fails. Reported-by: kernel test robot <yujie.liu@intel.com> Link: https://lore.kernel.org/all/202210111304.d369bc32-yujie.liu@intel.com Fixes: 965f47aeb5de ("btrfs: make btrfs_buffered_write nowait compatible") Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-11-02btrfs: fix nowait buffered write returning -ENOSPCFilipe Manana
If we are doing a buffered write in NOWAIT context and we can't reserve metadata space due to -ENOSPC, then we should return -EAGAIN so that we retry the write in a context allowed to block and do metadata reservation with flushing, which might succeed this time due to the allowed flushing. Returning -ENOSPC while in NOWAIT context simply makes some writes fail with -ENOSPC when they would likely succeed after switching from NOWAIT context to blocking context. That is unexpected behaviour and even fio complains about it with a warning like this: fio: io_u error on file /mnt/sdi/task_0.0.0: No space left on device: write offset=1535705088, buflen=65536 fio: pid=592630, err=28/file:io_u.c:1846, func=io_u error, error=No space left on device The fio's job config is this: [global] bs=64K ioengine=io_uring iodepth=1 size=2236962133 nr_files=1 filesize=2236962133 direct=0 runtime=10 fallocate=posix io_size=2236962133 group_reporting time_based [task_0] rw=randwrite directory=/mnt/sdi numjobs=4 So fix this by returning -EAGAIN if we are in NOWAIT context and the metadata reservation failed with -ENOSPC. Fixes: 304e45acdb8f ("btrfs: plumb NOWAIT through the write path") Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-11-02btrfs: remove pointless and double ulist frees in error paths of qgroup testsFilipe Manana
Several places in the qgroup self tests follow the pattern of freeing the ulist pointer they passed to btrfs_find_all_roots() if the call to that function returned an error. That is pointless because that function always frees the ulist in case it returns an error. Also In some places like at test_multiple_refs(), after a call to btrfs_qgroup_account_extent() we also leave "old_roots" and "new_roots" pointing to ulists that were freed, because btrfs_qgroup_account_extent() has freed those ulists, and if after that the next call to btrfs_find_all_roots() fails, we call ulist_free() on the "old_roots" ulist again, resulting in a double free. So remove those calls to reduce the code size and avoid double ulist free in case of an error. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-11-02btrfs: fix ulist leaks in error paths of qgroup self testsFilipe Manana
In the test_no_shared_qgroup() and test_multiple_refs() qgroup self tests, if we fail to add the tree ref, remove the extent item or remove the extent ref, we are returning from the test function without freeing the "old_roots" ulist that was allocated by the previous calls to btrfs_find_all_roots(). Fix that by calling ulist_free() before returning. Fixes: 442244c96332 ("btrfs: qgroup: Switch self test to extent-oriented qgroup mechanism.") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-11-02btrfs: fix inode list leak during backref walking at find_parent_nodes()Filipe Manana
During backref walking, at find_parent_nodes(), if we are dealing with a data extent and we get an error while resolving the indirect backrefs, at resolve_indirect_refs(), or in the while loop that iterates over the refs in the direct refs rbtree, we end up leaking the inode lists attached to the direct refs we have in the direct refs rbtree that were not yet added to the refs ulist passed as argument to find_parent_nodes(). Since they were not yet added to the refs ulist and prelim_release() does not free the lists, on error the caller can only free the lists attached to the refs that were added to the refs ulist, all the remaining refs get their inode lists never freed, therefore leaking their memory. Fix this by having prelim_release() always free any attached inode list to each ref found in the rbtree, and have find_parent_nodes() set the ref's inode list to NULL once it transfers ownership of the inode list to a ref added to the refs ulist passed to find_parent_nodes(). Fixes: 86d5f9944252 ("btrfs: convert prelimary reference tracking to use rbtrees") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-11-02btrfs: fix inode list leak during backref walking at resolve_indirect_refs()Filipe Manana
During backref walking, at resolve_indirect_refs(), if we get an error we jump to the 'out' label and call ulist_free() on the 'parents' ulist, which frees all the elements in the ulist - however that does not free any inode lists that may be attached to elements, through the 'aux' field of a ulist node, so we end up leaking lists if we have any attached to the unodes. Fix this by calling free_leaf_list() instead of ulist_free() when we exit from resolve_indirect_refs(). The static function free_leaf_list() is moved up for this to be possible and it's slightly simplified by removing unnecessary code. Fixes: 3301958b7c1d ("Btrfs: add inodes before dropping the extent lock in find_all_leafs") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-11-02Merge branch 'misdn-fixes'David S. Miller
Yang Yingliang says: ==================== two fixes for mISDN This patchset fixes two issues when device_add() returns error. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02isdn: mISDN: netjet: fix wrong check of device registrationYang Yingliang
The class is set in mISDN_register_device(), but if device_add() returns error, it will lead to delete a device without added, fix this by using device_is_registered() to check if the device is registered. Fixes: a900845e5661 ("mISDN: Add support for Traverse Technologies NETJet PCI cards") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02mISDN: fix possible memory leak in mISDN_register_device()Yang Yingliang
Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array"), the name of device is allocated dynamically, add put_device() to give up the reference, so that the name can be freed in kobject_cleanup() when the refcount is 0. Set device class before put_device() to avoid null release() function WARN message in device_release(). Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02rose: Fix NULL pointer dereference in rose_send_frame()Zhang Qilong
The syzkaller reported an issue: KASAN: null-ptr-deref in range [0x0000000000000380-0x0000000000000387] CPU: 0 PID: 4069 Comm: kworker/0:15 Not tainted 6.0.0-syzkaller-02734-g0326074ff465 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Workqueue: rcu_gp srcu_invoke_callbacks RIP: 0010:rose_send_frame+0x1dd/0x2f0 net/rose/rose_link.c:101 Call Trace: <IRQ> rose_transmit_clear_request+0x1d5/0x290 net/rose/rose_link.c:255 rose_rx_call_request+0x4c0/0x1bc0 net/rose/af_rose.c:1009 rose_loopback_timer+0x19e/0x590 net/rose/rose_loopback.c:111 call_timer_fn+0x1a0/0x6b0 kernel/time/timer.c:1474 expire_timers kernel/time/timer.c:1519 [inline] __run_timers.part.0+0x674/0xa80 kernel/time/timer.c:1790 __run_timers kernel/time/timer.c:1768 [inline] run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1803 __do_softirq+0x1d0/0x9c8 kernel/softirq.c:571 [...] </IRQ> It triggers NULL pointer dereference when 'neigh->dev->dev_addr' is called in the rose_send_frame(). It's the first occurrence of the `neigh` is in rose_loopback_timer() as `rose_loopback_neigh', and the 'dev' in 'rose_loopback_neigh' is initialized sa nullptr. It had been fixed by commit 3b3fd068c56e3fbea30090859216a368398e39bf ("rose: Fix Null pointer dereference in rose_send_frame()") ever. But it's introduced by commit 3c53cd65dece47dd1f9d3a809f32e59d1d87b2b8 ("rose: check NULL rose_loopback_neigh->loopback") again. We fix it by add NULL check in rose_transmit_clear_request(). When the 'dev' in 'neigh' is NULL, we don't reply the request and just clear it. syzkaller don't provide repro, and I provide a syz repro like: r0 = syz_init_net_socket$bt_sco(0x1f, 0x5, 0x2) ioctl$sock_inet_SIOCSIFFLAGS(r0, 0x8914, &(0x7f0000000180)={'rose0\x00', 0x201}) r1 = syz_init_net_socket$rose(0xb, 0x5, 0x0) bind$rose(r1, &(0x7f00000000c0)=@full={0xb, @dev, @null, 0x0, [@null, @null, @netrom, @netrom, @default, @null]}, 0x40) connect$rose(r1, &(0x7f0000000240)=@short={0xb, @dev={0xbb, 0xbb, 0xbb, 0x1, 0x0}, @remote={0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x1}, 0x1, @netrom={0xbb, 0xbb, 0xbb, 0xbb, 0xbb, 0x0, 0x0}}, 0x1c) Fixes: 3c53cd65dece ("rose: check NULL rose_loopback_neigh->loopback") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02perf/x86/intel: Add Cooper Lake stepping to isolation_ucodes[]Kan Liang
The intel_pebs_isolation quirk checks both model number and stepping. Cooper Lake has a different stepping (11) than the other Skylake Xeon. It cannot benefit from the optimization in commit 9b545c04abd4f ("perf/x86/kvm: Avoid unnecessary work in guest filtering"). Add the stepping of Cooper Lake into the isolation_ucodes[] table. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20221031154550.571663-1-kan.liang@linux.intel.com
2022-11-02perf/x86/intel: Fix pebs event constraints for SPRKan Liang
According to the latest event list, update the MEM_INST_RETIRED events which support the DataLA facility for SPR. Fixes: 61b985e3e775 ("perf/x86/intel: Add perf core PMU support for Sapphire Rapids") Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20221031154119.571386-2-kan.liang@linux.intel.com
2022-11-02perf/x86/intel: Fix pebs event constraints for ICLKan Liang
According to the latest event list, update the MEM_INST_RETIRED events which support the DataLA facility. Fixes: 6017608936c1 ("perf/x86/intel: Add Icelake support") Reported-by: Jannis Klinkenberg <jannis.klinkenberg@rwth-aachen.de> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20221031154119.571386-1-kan.liang@linux.intel.com
2022-11-02perf/x86/rapl: Use standard Energy Unit for SPR Dram RAPL domainZhang Rui
Intel Xeon servers used to use a fixed energy resolution (15.3uj) for Dram RAPL domain. But on SPR, Dram RAPL domain follows the standard energy resolution as described in MSR_RAPL_POWER_UNIT. Remove the SPR Dram energy unit quirk. Fixes: bcfd218b6679 ("perf/x86/rapl: Add support for Intel SPR platform") Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Tested-by: Wang Wendy <wendy.wang@intel.com> Link: https://lkml.kernel.org/r/20220924054738.12076-3-rui.zhang@intel.com
2022-11-02perf/hw_breakpoint: test: Skip the test if dependencies unmetDavid Gow
Running the test currently fails on non-SMP systems, despite being enabled by default. This means that running the test with: ./tools/testing/kunit/kunit.py run --arch x86_64 hw_breakpoint results in every hw_breakpoint test failing with: # test_one_cpu: failed to initialize: -22 not ok 1 - test_one_cpu Instead, use kunit_skip(), which will mark the test as skipped, and give a more comprehensible message: ok 1 - test_one_cpu # SKIP not enough cpus This makes it more obvious that the test is not suited to the test environment, and so wasn't run, rather than having run and failed. Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Daniel Latypov <dlatypov@google.com> Acked-by: Marco Elver <elver@google.com> Link: https://lore.kernel.org/r/20221026141040.1609203-1-davidgow@google.com
2022-11-02netfilter: nf_nat: Fix possible memory leak in nf_nat_init()Chen Zhongjin
In nf_nat_init(), register_nf_nat_bpf() can fail and return directly without any error handling. Then nf_nat_bysource will leak and registering of &nat_net_ops, &follow_master_nat and nf_nat_hook won't be reverted. This leaves wild ops in linkedlists and when another module tries to call register_pernet_operations() or nf_ct_helper_expectfn_register() it triggers page fault: BUG: unable to handle page fault for address: fffffbfff81b964c RIP: 0010:register_pernet_operations+0x1b9/0x5f0 Call Trace: <TASK> register_pernet_subsys+0x29/0x40 ebtables_init+0x58/0x1000 [ebtables] ... Fixes: 820dc0523e05 ("net: netfilter: move bpf_ct_set_nat_info kfunc in nf_nat_bpf.c") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
generated by cgit (git 2.34.1) at 2025-07-15 23:33:02 +0000