| Age | Commit message (Collapse) | Author |
|---|
|
While reading sysctl_optmem_max, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While reading rs->interval and rs->burst, they can be changed
concurrently via sysctl (e.g. net_ratelimit_state). Thus, we
need to add READ_ONCE() to their readers.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While reading netdev_tstamp_prequeue, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
Fixes: 3b098e2d7c69 ("net: Consistent skb timestamping")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While reading netdev_max_backlog, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
While at it, we remove the unnecessary spaces in the doc.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While reading weight_p, it can be changed concurrently. Thus, we need
to add READ_ONCE() to its reader.
Also, dev_[rt]x_weight can be read/written at the same time. So, we
need to use READ_ONCE() and WRITE_ONCE() for its access. Moreover, to
use the same weight_p while changing dev_[rt]x_weight, we add a mutex
in proc_do_dev_weight().
Fixes: 3d48b53fb2ae ("net: dev_weight: TX/RX orthogonality")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While reading sysctl_[rw]mem_(max|default), they can be changed
concurrently. Thus, we need to add READ_ONCE() to its readers.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
skb_copy_bits() could fail, which requires a check on the return
value.
Signed-off-by: Li Zhong <floridsleeves@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2022-08-24
1) Fix a refcount leak in __xfrm_policy_check.
From Xin Xiong.
2) Revert "xfrm: update SA curlft.use_time". This
violates RFC 2367. From Antony Antony.
3) Fix a comment on XFRMA_LASTUSED.
From Antony Antony.
4) x->lastused is not cloned in xfrm_do_migrate.
Fix from Antony Antony.
5) Serialize the calls to xfrm_probe_algs.
From Herbert Xu.
6) Fix a null pointer dereference of dst->dev on a metadata
dst in xfrm_lookup_with_ifid. From Nikolay Aleksandrov.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On link state change, the controller gets reset,
causing PPS to drop out and the PHC to lose its
time and calibration. So we restart it if needed,
restoring calibration and time registers.
Changes since v2:
* Add `fec_ptp_save_state()`/`fec_ptp_restore_state()`
* Use `ktime_get_real_ns()`
* Use `BIT()` macro
Changes since v1:
* More ECR #define's
* Stop PPS in `fec_ptp_stop()`
Signed-off-by: Csókás Bence <csokas.bence@prolan.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So add all skb to
a tmp list, then free them after spin_unlock_irqrestore() at
once.
Fixes: 66ba215cb513 ("neigh: fix possible DoS due to net iface start/stop loop")
Suggested-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When running identity-mapped and depending on the kernel configuration,
it is possible that the compiler uses jump tables when generating code
for cc_platform_has().
This causes a boot failure because the jump table uses un-mapped kernel
virtual addresses, not identity-mapped addresses. This has been seen
with CONFIG_RETPOLINE=n.
Similar to sme_encrypt_kernel(), use an open-coded direct check for the
status of SNP rather than trying to eliminate the jump table. This
preserves any code optimization in cc_platform_has() that can be useful
post boot. It also limits the changes to SEV-specific files so that
future compiler features won't necessarily require possible build changes
just because they are not compatible with running identity-mapped.
[ bp: Massage commit message. ]
Fixes: 5e5ccff60a29 ("x86/sev: Add helper for validating pages in early enc attribute changes")
Reported-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org> # 5.19.x
Link: https://lore.kernel.org/all/YqfabnTRxFSM+LoX@google.com/
|
|
In some cases, bootloaders will leave boot_params->cc_blob_address
uninitialized rather than zeroing it out. This field is only meant to be
set by the boot/compressed kernel in order to pass information to the
uncompressed kernel when SEV-SNP support is enabled.
Therefore, there are no cases where the bootloader-provided values
should be treated as anything other than garbage. Otherwise, the
uncompressed kernel may attempt to access this bogus address, leading to
a crash during early boot.
Normally, sanitize_boot_params() would be used to clear out such fields
but that happens too late: sev_enable() may have already initialized
it to a valid value that should not be zeroed out. Instead, have
sev_enable() zero it out unconditionally beforehand.
Also ensure this happens for !CONFIG_AMD_MEM_ENCRYPT as well by also
including this handling in the sev_enable() stub function.
[ bp: Massage commit message and comments. ]
Fixes: b190a043c49a ("x86/sev: Add SEV-SNP feature detection/setup")
Reported-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Reported-by: watnuss@gmx.de
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216387
Link: https://lore.kernel.org/r/20220823160734.89036-1-michael.roth@amd.com
|
|
Currently, net.netfilter.nf_conntrack_frag6_high_thresh can only be lowered.
I found this issue while investigating a probable kernel issue
causing flakes in tools/testing/selftests/net/ip_defrag.sh
In particular, these sysctl changes were ignored:
ip netns exec "${NETNS}" sysctl -w net.netfilter.nf_conntrack_frag6_high_thresh=9000000 >/dev/null 2>&1
ip netns exec "${NETNS}" sysctl -w net.netfilter.nf_conntrack_frag6_low_thresh=7000000 >/dev/null 2>&1
This change is inline with commit 836196239298 ("net/ipfrag: let ip[6]frag_high_thresh
in ns be higher than in init_net")
Fixes: 8db3d41569bb ("netfilter: nf_defrag_ipv6: use net_generic infra")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
To clear the flow table on flow table free, the following sequence
normally happens in order:
1) gc_step work is stopped to disable any further stats/del requests.
2) All flow table entries are set to teardown state.
3) Run gc_step which will queue HW del work for each flow table entry.
4) Waiting for the above del work to finish (flush).
5) Run gc_step again, deleting all entries from the flow table.
6) Flow table is freed.
But if a flow table entry already has pending HW stats or HW add work
step 3 will not queue HW del work (it will be skipped), step 4 will wait
for the pending add/stats to finish, and step 5 will queue HW del work
which might execute after freeing of the flow table.
To fix the above, this patch flushes the pending work, then it sets the
teardown flag to all flows in the flowtable and it forces a garbage
collector run to queue work to remove the flows from hardware, then it
flushes this new pending work and (finally) it forces another garbage
collector run to remove the entry from the software flowtable.
Stack trace:
[47773.882335] BUG: KASAN: use-after-free in down_read+0x99/0x460
[47773.883634] Write of size 8 at addr ffff888103b45aa8 by task kworker/u20:6/543704
[47773.885634] CPU: 3 PID: 543704 Comm: kworker/u20:6 Not tainted 5.12.0-rc7+ #2
[47773.886745] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009)
[47773.888438] Workqueue: nf_ft_offload_del flow_offload_work_handler [nf_flow_table]
[47773.889727] Call Trace:
[47773.890214] dump_stack+0xbb/0x107
[47773.890818] print_address_description.constprop.0+0x18/0x140
[47773.892990] kasan_report.cold+0x7c/0xd8
[47773.894459] kasan_check_range+0x145/0x1a0
[47773.895174] down_read+0x99/0x460
[47773.899706] nf_flow_offload_tuple+0x24f/0x3c0 [nf_flow_table]
[47773.907137] flow_offload_work_handler+0x72d/0xbe0 [nf_flow_table]
[47773.913372] process_one_work+0x8ac/0x14e0
[47773.921325]
[47773.921325] Allocated by task 592159:
[47773.922031] kasan_save_stack+0x1b/0x40
[47773.922730] __kasan_kmalloc+0x7a/0x90
[47773.923411] tcf_ct_flow_table_get+0x3cb/0x1230 [act_ct]
[47773.924363] tcf_ct_init+0x71c/0x1156 [act_ct]
[47773.925207] tcf_action_init_1+0x45b/0x700
[47773.925987] tcf_action_init+0x453/0x6b0
[47773.926692] tcf_exts_validate+0x3d0/0x600
[47773.927419] fl_change+0x757/0x4a51 [cls_flower]
[47773.928227] tc_new_tfilter+0x89a/0x2070
[47773.936652]
[47773.936652] Freed by task 543704:
[47773.937303] kasan_save_stack+0x1b/0x40
[47773.938039] kasan_set_track+0x1c/0x30
[47773.938731] kasan_set_free_info+0x20/0x30
[47773.939467] __kasan_slab_free+0xe7/0x120
[47773.940194] slab_free_freelist_hook+0x86/0x190
[47773.941038] kfree+0xce/0x3a0
[47773.941644] tcf_ct_flow_table_cleanup_work
Original patch description and stack trace by Paul Blakey.
Fixes: c29f74e0df7a ("netfilter: nf_flow_table: hardware offload support")
Reported-by: Paul Blakey <paulb@nvidia.com>
Tested-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Expose nf_flow_table_gc_run() to force a garbage collector run from the
offload infrastructure.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Update nft_data_init() to report EINVAL if chain is already bound.
Fixes: d0e2c7de92c7 ("netfilter: nf_tables: add NFT_CHAIN_BINDING")
Reported-by: Gwangun Jung <exsociety@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Only allow to use this expression from NFPROTO_NETDEV family.
Fixes: af308b94a2a4 ("netfilter: nf_tables: add tunnel support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
As it was originally intended, restrict extension to supported families.
Fixes: b96af92d6eaf ("netfilter: nf_tables: implement Passive OS fingerprint module in nft_osf")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Error might occur later in the nf_tables_addchain() codepath, enable
static key only after transaction has been created.
Fixes: 9f08ea848117 ("netfilter: nf_tables: keep chain counters away from hot path")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Instead report ERANGE if csum_offset is too long, and EOPNOTSUPP if type
is not support.
Fixes: 7ec3f7b47b8d ("netfilter: nft_payload: add packet mangling support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Instead of offset and length are truncation to u8, report ERANGE.
Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
mutex is per-netns, move table_netns to the pernet area.
*read-write* to 0xffffffff883a01e8 of 8 bytes by task 6542 on cpu 0:
nf_tables_newtable+0x6dc/0xc00 net/netfilter/nf_tables_api.c:1221
nfnetlink_rcv_batch net/netfilter/nfnetlink.c:513 [inline]
nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:634 [inline]
nfnetlink_rcv+0xa6a/0x13a0 net/netfilter/nfnetlink.c:652
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x652/0x730 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x643/0x740 net/netlink/af_netlink.c:1921
Fixes: f102d66b335a ("netfilter: nf_tables: use dedicated mutex to guard transactions")
Reported-by: Abhishek Shah <abhishek.shah@columbia.edu>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Updates on existing implicit chain make no sense, disallow this.
Fixes: d0e2c7de92c7 ("netfilter: nf_tables: add NFT_CHAIN_BINDING")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- The psi data structure was changed to be allocated dynamically but
it wasn't being cleared leading to it reporting garbage values and
triggering spurious oom kills.
- A deadlock involving cpuset and cpu hotplug.
- When a controller is moved across cgroup hierarchies,
css->rstat_css_node didn't get RCU drained properly from the previous
list.
* tag 'cgroup-for-6.0-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Fix race condition at rebind_subsystems()
cgroup: Fix threadgroup_rwsem <-> cpus_read_lock() deadlock
sched/psi: Remove redundant cgroup_psi() when !CONFIG_CGROUPS
sched/psi: Remove unused parameter nbytes of psi_trigger_create()
sched/psi: Zero the memory of struct psi_group
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fix from Paul Moore:
"A single fix for a potential double-free on a fsnotify error path"
* tag 'audit-pr-20220823' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: fix potential double free on error path from fsnotify_add_inode_mark
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull file_remove_privs() fix from Christian Brauner:
"As part of Stefan's and Jens' work to add async buffered write
support to xfs we refactored file_remove_privs() and added
__file_remove_privs() to avoid calling __remove_privs() when
IOCB_NOWAIT is passed.
While debugging a recent performance regression report I found that
during review we missed that commit faf99b563558 ("fs: add
__remove_file_privs() with flags parameter") accidently changed
behavior when dentry_needs_remove_privs() returns zero.
Before the commit it would still call inode_has_no_xattr() setting
the S_NOSEC bit and thereby avoiding even calling into
dentry_needs_remove_privs() the next time this function is called.
After that commit inode_has_no_xattr() would only be called if
__remove_privs() had to be called.
Restore the old behavior. This is likely the cause of the performance
regression"
* tag 'fs.fixes.v6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
fs: __file_remove_privs(): restore call to inode_has_no_xattr()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2022-08-22
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2022-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Unlock on error in mlx5_sriov_enable()
net/mlx5e: Fix use after free in mlx5e_fs_init()
net/mlx5e: kTLS, Use _safe() iterator in mlx5e_tls_priv_tx_list_cleanup()
net/mlx5: unlock on error path in esw_vfs_changed_event_handler()
net/mlx5e: Fix wrong tc flag used when set hw-tc-offload off
net/mlx5e: TC, Add missing policer validation
net/mlx5e: Fix wrong application of the LRO state
net/mlx5: Avoid false positive lockdep warning by adding lock_class_key
net/mlx5: Fix cmd error logging for manage pages cmd
net/mlx5: Disable irq when locking lag_lock
net/mlx5: Eswitch, Fix forwarding decision to uplink
net/mlx5: LAG, fix logic over MLX5_LAG_FLAG_NDEVS_READY
net/mlx5e: Properly disable vlan strip on non-UL reps
====================
Link: https://lore.kernel.org/r/20220822195917.216025-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
ice: xsk: reduced queue count fixes
Maciej Fijalkowski says:
this small series is supposed to fix the issues around AF_XDP usage with
reduced queue count on interface. Due to the XDP rings setup, some
configurations can result in sockets not seeing traffic flowing. More
about this in description of patch 2.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: xsk: use Rx ring's XDP ring when picking NAPI context
ice: xsk: prohibit usage of non-balanced queue id
====================
Link: https://lore.kernel.org/r/20220822163257.2382487-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
|
|
Michael Chan says:
====================
bnxt_en: Bug fixes
This series includes 2 fixes for regressions introduced by the XDP
multi-buffer feature, 1 devlink reload bug fix, and 1 SRIOV resource
accounting bug fix.
====================
Link: https://lore.kernel.org/r/1661180814-19350-1-git-send-email-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
LRO/GRO_HW should be disabled if there is an attached XDP program.
BNXT_FLAG_TPA is the current setting of the LRO/GRO_HW. Using
BNXT_FLAG_TPA to disable LRO/GRO_HW will cause these features to be
permanently disabled once they are disabled.
Fixes: 1dc4c557bfed ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff")
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are 2 issues:
1. We should decrement hw_resc->max_nqs instead of hw_resc->max_irqs
with the number of NQs assigned to the VFs. The IRQs are fixed
on each function and cannot be re-assigned. Only the NQs are being
assigned to the VFs.
2. vf_msix is the total number of NQs to be assigned to the VFs. So
we should decrement vf_msix from hw_resc->max_nqs.
Fixes: b16b68918674 ("bnxt_en: Add SR-IOV support for 57500 chips.")
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add missing devlink_set_features() API for callbacks reload_down
and reload_up to function.
Fixes: 228ea8c187d8 ("bnxt_en: implement devlink dev reload driver_reinit")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using BNXT_PAGE_MODE_BUF_SIZE + offset as buffer length value is not
sufficient when running single buffer XDP programs doing redirect
operations. The stack will complain on missing skb tail room. Fix it
by using PAGE_SIZE when calling xdp_init_buff() for single buffer
programs.
Fixes: b231c3f3414c ("bnxt: refactor bnxt_rx_xdp to separate xdp_init_buff/xdp_prepare_buff")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Address learning should initially be turned off by the driver for port
operation in standalone mode, then the DSA core handles changes to it
via ds->ops->port_bridge_flags().
Leaving address learning enabled while ports are standalone breaks any
kind of communication which involves port B receiving what port A has
sent. Notably it breaks the ksz9477 driver used with a (non offloaded,
ports act as if standalone) bonding interface in active-backup mode,
when the ports are connected together through external switches, for
redundancy purposes.
This fixes a major design flaw in the ksz9477 and ksz8795 drivers, which
unconditionally leave address learning enabled even while ports operate
as standalone.
Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477")
Link: https://lore.kernel.org/netdev/CAFZh4h-JVWt80CrQWkFji7tZJahMfOToUJQgKS5s0_=9zzpvYQ@mail.gmail.com/
Reported-by: Brian Hutchinson <b.hutchman@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220818164809.3198039-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
An AXI master address translation table property was inadvertently
added to the device tree & this was not caught by dtbs_check at the
time. Remove the property - it should not be in mpfs.dtsi anyway as
it would be more suitable in -fabric.dtsi nor does it actually apply
to the version of the reference design we are using for upstream.
Link: https://www.microsemi.com/document-portal/doc_download/1245812-polarfire-fpga-and-polarfire-soc-fpga-pci-express-user-guide # Section 1.3.3
Fixes: 528a5b1f2556 ("riscv: dts: microchip: add new peripherals to icicle kit device tree")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Recent versions of dt-schema warn about a previously undetected
undocumented property:
arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dtb: mmc@20008000: Unevaluated properties are not allowed ('card-detect-delay' was unexpected)
From schema: Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
There are no GPIOs connected to MSSIO6B4 pin K3 so adding the common
cd-debounce-delay-ms property makes no sense. The Cadence IP has a
register that sets the card detect delay as "DP * tclk". On MPFS, this
clock frequency is not configurable (it must be 200 MHz) & the FPGA
comes out of reset with this register already set.
Fixes: bc47b2217f24 ("riscv: dts: microchip: add the sundance polarberry")
Fixes: 0fa6107eca41 ("RISC-V: Initial DTS for Microchip ICICLE board")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Recent versions of dt-schema warn about a previously undetected
undocument property on the icicle & polarberry devicetrees:
arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dtb: ethernet@20112000: ethernet-phy@8: Unevaluated properties are not allowed ('ti,fifo-depth' was unexpected)
From schema: Documentation/devicetree/bindings/net/cdns,macb.yaml
I know what you're thinking, the binding doesn't look to be the problem
and I agree. I am not sure why a TI vendor property was ever actually
added since it has no meaning... just get rid of it.
Fixes: bc47b2217f24 ("riscv: dts: microchip: add the sundance polarberry")
Fixes: 0fa6107eca41 ("RISC-V: Initial DTS for Microchip ICICLE board")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Recent versions of dt-schema complain about the PCIe controller's child
node name:
arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dtb: pcie@2000000000: Unevaluated properties are not allowed ('clock-names', 'clocks', 'legacy-interrupt-controller', 'microchip,axi-m-atr0' were unexpected)
From schema: Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
Make the dts match the correct property name in the dts.
Fixes: 528a5b1f2556 ("riscv: dts: microchip: add new peripherals to icicle kit device tree")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"Some interesting background to the current patchset:
It turned out that the fldw instruction (which loads a 32-bit word
from memory into one half of a FP register) failed on unaligned
addresses and even trashed some other random FP register instead. It's
a trivial one-liner fix in the exception handler but this failure
dates back to the very beginnings of the parisc-port. It's strange
that it was never noticed before.
Another patch fixes an annoyance noticed by Randy Dunlap. Running
"make ARCH=parisc64 randconfig" always returned a 32-bit config,
although one would expect a 64-bit config. Masahiro Yamada suggested
to mimik sparc Kconfig code, which fixed the issue nicely. This
allowed to drop some compiler build checks too.
Third, it's possible to build an optimized 32-bit kernel for PA8X00
(64-bit) CPUs, which then wouldn't start on 32-bit-only (PA1.x)
machines. I've added a bootup check which prevents that and which
prints a message to the console. This can be tested with qemu, which
currently only supports 32-bit emulation.
The other patches are usual clean-up stuff like added return value
checks and typo fixes in comments.
Summary:
- Fix emulation of fldw instruction on unaligned addresses
- Fix "make ARCH=parisc64 randconfig" to return a 64-bit config
- Prevent boot if trying to boot a 32-bit kernel compiled for PA8X00
CPUs on 32-bit only machines
- ccio-dma: Handle kmalloc failure in ccio_init_resources()"
* tag 'parisc-for-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Add runtime check to prevent PA2.0 kernels on PA1.x machines
parisc: ccio-dma: Handle kmalloc failure in ccio_init_resources()
parisc: led: Move from strlcpy with unused retval to strscpy
parisc: ccio-dma: Fix typo in comment
Revert "parisc: Show error if wrong 32/64-bit compiler is being used"
parisc: Make CONFIG_64BIT available for ARCH=parisc64 only
parisc: Fix exception handler for fldw and fstw instructions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Thirteen fixes, almost all for MM.
Seven of these are cc:stable and the remainder fix up the changes
which went into this -rc cycle"
* tag 'mm-hotfixes-stable-2022-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
kprobes: don't call disarm_kprobe() for disabled kprobes
mm/shmem: shmem_replace_page() remember NR_SHMEM
mm/shmem: tmpfs fallocate use file_modified()
mm/shmem: fix chattr fsflags support in tmpfs
mm/hugetlb: support write-faults in shared mappings
mm/hugetlb: fix hugetlb not supporting softdirty tracking
mm/uffd: reset write protection when unregister with wp-mode
mm/smaps: don't access young/dirty bit if pte unpresent
mm: add DEVICE_ZONE to FOR_ALL_ZONES
kernel/sys_ni: add compat entry for fadvise64_64
mm/gup: fix FOLL_FORCE COW security issue and remove FOLL_COW
Revert "zram: remove double compression logic"
get_maintainer: add Alan to .get_maintainer.ignore
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fixes from Shuah Khan:
"Fix for a mmc test and to load .kunit_test_suites section when
CONFIG_KUNIT=m, and not just when KUnit is built-in"
* tag 'linux-kselftest-kunit-fixes-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
module: kunit: Load .kunit_test_suites section when CONFIG_KUNIT=m
mmc: sdhci-of-aspeed: test: Fix dependencies when KUNIT=m
|
|
If the replace target device reappears after the suspended replace is
cancelled, it blocks the mount operation as it can't find the matching
replace-item in the metadata. As shown below,
BTRFS error (device sda5): replace devid present without an active replace item
To overcome this situation, the user can run the command
btrfs device scan --forget <replace target device>
and try the mount command again. And also, to avoid repeating the issue,
superblock on the devid=0 must be wiped.
wipefs -a device-path-to-devid=0.
This patch adds some info when this situation occurs.
Reported-by: Samuel Greiner <samuel@balkonien.org>
Link: https://lore.kernel.org/linux-btrfs/b4f62b10-b295-26ea-71f9-9a5c9299d42c@balkonien.org/T/
CC: stable@vger.kernel.org # 5.0+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If the filesystem mounts with the replace-operation in a suspended state
and try to cancel the suspended replace-operation, we hit the assert. The
assert came from the commit fe97e2e173af ("btrfs: dev-replace: replace's
scrub must not be running in suspended state") that was actually not
required. So just remove it.
$ mount /dev/sda5 /btrfs
BTRFS info (device sda5): cannot continue dev_replace, tgtdev is missing
BTRFS info (device sda5): you may cancel the operation after 'mount -o degraded'
$ mount -o degraded /dev/sda5 /btrfs <-- success.
$ btrfs replace cancel /btrfs
kernel: assertion failed: ret != -ENOTCONN, in fs/btrfs/dev-replace.c:1131
kernel: ------------[ cut here ]------------
kernel: kernel BUG at fs/btrfs/ctree.h:3750!
After the patch:
$ btrfs replace cancel /btrfs
BTRFS info (device sda5): suspended dev_replace from /dev/sda5 (devid 1) to <missing disk> canceled
Fixes: fe97e2e173af ("btrfs: dev-replace: replace's scrub must not be running in suspended state")
CC: stable@vger.kernel.org # 5.0+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At btrfs_del_root_ref(), if btrfs_search_slot() returns an error, we end
up returning from the function with a value of 0 (success). This happens
because the function returns the value stored in the variable 'err',
which is 0, while the error value we got from btrfs_search_slot() is
stored in the 'ret' variable.
So fix it by setting 'err' with the error value.
Fixes: 8289ed9f93bef2 ("btrfs: replace the BUG_ON in btrfs_del_root_ref with proper error handling")
CC: stable@vger.kernel.org # 5.16+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When testing space_cache v2 on a large set of machines, we encountered a
few symptoms:
1. "unable to add free space :-17" (EEXIST) errors.
2. Missing free space info items, sometimes caught with a "missing free
space info for X" error.
3. Double-accounted space: ranges that were allocated in the extent tree
and also marked as free in the free space tree, ranges that were
marked as allocated twice in the extent tree, or ranges that were
marked as free twice in the free space tree. If the latter made it
onto disk, the next reboot would hit the BUG_ON() in
add_new_free_space().
4. On some hosts with no on-disk corruption or error messages, the
in-memory space cache (dumped with drgn) disagreed with the free
space tree.
All of these symptoms have the same underlying cause: a race between
caching the free space for a block group and returning free space to the
in-memory space cache for pinned extents causes us to double-add a free
range to the space cache. This race exists when free space is cached
from the free space tree (space_cache=v2) or the extent tree
(nospace_cache, or space_cache=v1 if the cache needs to be regenerated).
struct btrfs_block_group::last_byte_to_unpin and struct
btrfs_block_group::progress are supposed to protect against this race,
but commit d0c2f4fa555e ("btrfs: make concurrent fsyncs wait less when
waiting for a transaction commit") subtly broke this by allowing
multiple transactions to be unpinning extents at the same time.
Specifically, the race is as follows:
1. An extent is deleted from an uncached block group in transaction A.
2. btrfs_commit_transaction() is called for transaction A.
3. btrfs_run_delayed_refs() -> __btrfs_free_extent() runs the delayed
ref for the deleted extent.
4. __btrfs_free_extent() -> do_free_extent_accounting() ->
add_to_free_space_tree() adds the deleted extent back to the free
space tree.
5. do_free_extent_accounting() -> btrfs_update_block_group() ->
btrfs_cache_block_group() queues up the block group to get cached.
block_group->progress is set to block_group->start.
6. btrfs_commit_transaction() for transaction A calls
switch_commit_roots(). It sets block_group->last_byte_to_unpin to
block_group->progress, which is block_group->start because the block
group hasn't been cached yet.
7. The caching thread gets to our block group. Since the commit roots
were already switched, load_free_space_tree() sees the deleted extent
as free and adds it to the space cache. It finishes caching and sets
block_group->progress to U64_MAX.
8. btrfs_commit_transaction() advances transaction A to
TRANS_STATE_SUPER_COMMITTED.
9. fsync calls btrfs_commit_transaction() for transaction B. Since
transaction A is already in TRANS_STATE_SUPER_COMMITTED and the
commit is for fsync, it advances.
10. btrfs_commit_transaction() for transaction B calls
switch_commit_roots(). This time, the block group has already been
cached, so it sets block_group->last_byte_to_unpin to U64_MAX.
11. btrfs_commit_transaction() for transaction A calls
btrfs_finish_extent_commit(), which calls unpin_extent_range() for
the deleted extent. It sees last_byte_to_unpin set to U64_MAX (by
transaction B!), so it adds the deleted extent to the space cache
again!
This explains all of our symptoms above:
* If the sequence of events is exactly as described above, when the free
space is re-added in step 11, it will fail with EEXIST.
* If another thread reallocates the deleted extent in between steps 7
and 11, then step 11 will silently re-add that space to the space
cache as free even though it is actually allocated. Then, if that
space is allocated *again*, the free space tree will be corrupted
(namely, the wrong item will be deleted).
* If we don't catch this free space tree corruption, it will continue
to get worse as extents are deleted and reallocated.
The v1 space_cache is synchronously loaded when an extent is deleted
(btrfs_update_block_group() with alloc=0 calls btrfs_cache_block_group()
with load_cache_only=1), so it is not normally affected by this bug.
However, as noted above, if we fail to load the space cache, we will
fall back to caching from the extent tree and may hit this bug.
The easiest fix for this race is to also make caching from the free
space tree or extent tree synchronous. Josef tested this and found no
performance regressions.
A few extra changes fall out of this change. Namely, this fix does the
following, with step 2 being the crucial fix:
1. Factor btrfs_caching_ctl_wait_done() out of
btrfs_wait_block_group_cache_done() to allow waiting on a caching_ctl
that we already hold a reference to.
2. Change the call in btrfs_cache_block_group() of
btrfs_wait_space_cache_v1_finished() to
btrfs_caching_ctl_wait_done(), which makes us wait regardless of the
space_cache option.
3. Delete the now unused btrfs_wait_space_cache_v1_finished() and
space_cache_v1_done().
4. Change btrfs_cache_block_group()'s `int load_cache_only` parameter to
`bool wait` to more accurately describe its new meaning.
5. Change a few callers which had a separate call to
btrfs_wait_block_group_cache_done() to use wait = true instead.
6. Make btrfs_wait_block_group_cache_done() static now that it's not
used outside of block-group.c anymore.
Fixes: d0c2f4fa555e ("btrfs: make concurrent fsyncs wait less when waiting for a transaction commit")
CC: stable@vger.kernel.org # 5.12+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Fixes to vm and sgx test builds"
* tag 'linux-kselftest-fixes-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/vm: fix inability to build any vm tests
selftests/sgx: Ignore OpenSSL 3.0 deprecated functions warning
|
|
TPROXY is only allowed from prerouting, but nft_tproxy doesn't check this.
This fixes a crash (null dereference) when using tproxy from e.g. output.
Fixes: 4ed8eb6570a4 ("netfilter: nf_tables: Add native tproxy support")
Reported-by: Shell Chen <xierch@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Root cause:
The rebind_subsystems() is no lock held when move css object from A
list to B list,then let B's head be treated as css node at
list_for_each_entry_rcu().
Solution:
Add grace period before invalidating the removed rstat_css_node.
Reported-by: Jing-Ting Wu <jing-ting.wu@mediatek.com>
Suggested-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Jing-Ting Wu <jing-ting.wu@mediatek.com>
Tested-by: Jing-Ting Wu <jing-ting.wu@mediatek.com>
Link: https://lore.kernel.org/linux-arm-kernel/d8f0bc5e2fb6ed259f9334c83279b4c011283c41.camel@mediatek.com/T/
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Fixes: a7df69b81aac ("cgroup: rstat: support cgroup1")
Cc: stable@vger.kernel.org # v5.13+
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
There is no need to check if the cpufreq driver implements callback
cpufreq_driver::target_index. The logic in the __resolve_freq uses
the frequency table available in the policy. It doesn't matter if the
driver provides 'target_index' or 'target' callback. It just has to
populate the 'policy->freq_table'.
Thus, check only frequency table during the frequency resolving call.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
