summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-02-23net/mlx5e: Fix VF min/max rate parameters interchange mistakeGal Pressman
The VF min and max rate were passed incorrectly and resulted in wrongly interchanging them. Fix the order of parameters in mlx5_esw_qos_set_vport_rate(). Fixes: d7df09f5e7b4 ("net/mlx5: E-switch, Enable vport QoS on demand") Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-23net/mlx5e: Add missing increment of countLama Kayal
Add mistakenly missing increment of count variable when looping over output buffer in mlx5e_self_test(). This resolves the issue of garbage values output when querying with self test via ethtool. before: $ ethtool -t eth2 The test result is PASS The test extra info: Link Test 0 Speed Test 1768697188 Health Test 758528120 Loopback Test 3288687 after: $ ethtool -t eth2 The test result is PASS The test extra info: Link Test 0 Speed Test 0 Health Test 0 Loopback Test 0 Fixes: 7990b1b5e8bd ("net/mlx5e: loopback test is not supported in switchdev mode") Signed-off-by: Lama Kayal <lkayal@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-23net/mlx5e: MPLSoUDP decap, fix check for unsupported matchesMaor Dickman
Currently offload of rule on bareudp device require tunnel key in order to match on mpls fields and without it the mpls fields are ignored, this is incorrect due to the fact udp tunnel doesn't have key to match on. Fix by returning error in case flow is matching on tunnel key. Fixes: 72046a91d134 ("net/mlx5e: Allow to match on mpls parameters") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-23net/mlx5e: Fix MPLSoUDP encap to use MPLS action informationMaor Dickman
Currently the MPLSoUDP encap builds the MPLS header using encap action information (tunnel id, ttl and tos) instead of the MPLS action information (label, ttl, tc and bos) which is wrong. Fix by storing the MPLS action information during the flow action parse and later using it to create the encap MPLS header. Fixes: f828ca6a2fb6 ("net/mlx5e: Add support for hw encapsulation of MPLS over UDP") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-23net/mlx5e: Add feature check for set fec countersLama Kayal
Fec counters support is checked via the PCAM feature_cap_mask, bit 0: PPCNT_counter_group_Phy_statistical_counter_group. Add feature check to avoid faulty behavior. Fixes: 0a1498ebfa55 ("net/mlx5e: Expose FEC counters via ethtool") Signed-off-by: Lama Kayal <lkayal@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-23net/mlx5e: TC, Skip redundant ct clear actionsRoi Dayan
Offload of ct clear action is just resetting the reg_c register. It's done by allocating modify hdr resources which is limited. Doing it multiple times is redundant and wasting modify hdr resources and if resources depleted the driver will fail offloading the rule. Ignore redundant ct clear actions after the first one. Fixes: 806401c20a0f ("net/mlx5e: CT, Fix multiple allocations and memleak of mod acts") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Ariel Levkovich <lariel@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-23net/mlx5e: TC, Reject rules with forward and drop actionsRoi Dayan
Such rules are redundant but allowed and passed to the driver. The driver does not support offloading such rules so return an error. Fixes: 03a9d11e6eeb ("net/mlx5e: Add TC drop and mirred/redirect action parsing for SRIOV offloads") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-23net/mlx5e: TC, Reject rules with drop and modify hdr actionRoi Dayan
This kind of action is not supported by firmware and generates a syndrome. kernel: mlx5_core 0000:08:00.0: mlx5_cmd_check:777:(pid 102063): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x8708c3) Fixes: d7e75a325cb2 ("net/mlx5e: Add offloading of E-Switch TC pedit (header re-write) actions") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-23net/mlx5e: kTLS, Use CHECKSUM_UNNECESSARY for device-offloaded packetsTariq Toukan
For RX TLS device-offloaded packets, the HW spec guarantees checksum validation for the offloaded packets, but does not define whether the CQE.checksum field matches the original packet (ciphertext) or the decrypted one (plaintext). This latitude allows architetctural improvements between generations of chips, resulting in different decisions regarding the value type of CQE.checksum. Hence, for these packets, the device driver should not make use of this CQE field. Here we block CHECKSUM_COMPLETE usage for RX TLS device-offloaded packets, and use CHECKSUM_UNNECESSARY instead. Value of the packet's tcp_hdr.csum is not modified by the HW, and it always matches the original ciphertext. Fixes: 1182f3659357 ("net/mlx5e: kTLS, Add kTLS RX HW offload support") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-23net/mlx5e: Fix wrong return value on ioctl EEPROM query failureGal Pressman
The ioctl EEPROM query wrongly returns success on read failures, fix that by returning the appropriate error code. Fixes: bb64143eee8c ("net/mlx5e: Add ethtool support for dump module EEPROM") Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-23net/mlx5: Fix possible deadlock on rule deletionMaor Gottlieb
Add missing call to up_write_ref_node() which releases the semaphore in case the FTE doesn't have destinations, such in drop rule case. Fixes: 465e7baab6d9 ("net/mlx5: Fix deletion of duplicate rules") Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-23net/mlx5: Fix tc max supported prio for nic modeChris Mi
Only prio 1 is supported if firmware doesn't support ignore flow level for nic mode. The offending commit removed the check wrongly. Add it back. Fixes: 9a99c8f1253a ("net/mlx5e: E-Switch, Offload all chain 0 priorities when modify header and forward action is not supported") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-23net/mlx5: Fix wrong limitation of metadata match on ecpfAriel Levkovich
Match metadata support check returns false for ecpf device. However, this support does exist for ecpf and therefore this limitation should be removed to allow feature such as stacked devices and internal port offloaded to be supported. Fixes: 92ab1eb392c6 ("net/mlx5: E-Switch, Enable vport metadata matching if firmware supports it") Signed-off-by: Ariel Levkovich <lariel@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-23net/mlx5: Update log_max_qp value to be 17 at mostMaher Sanalla
Currently, log_max_qp value is dependent on what FW reports as its max capability. In reality, due to a bug, some FWs report a value greater than 17, even though they don't support log_max_qp > 17. This FW issue led the driver to exhaust memory on startup. Thus, log_max_qp value is set to be no more than 17 regardless of what FW reports, as it was before the cited commit. Fixes: f79a609ea6bf ("net/mlx5: Update log_max_qp value to FW max capability") Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Reviewed-by: Avihai Horon <avihaih@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-23net/mlx5: DR, Fix the threshold that defines when pool sync is initiatedYevgeny Kliteynik
When deciding whether to start syncing and actually free all the "hot" ICM chunks, we need to consider the type of the ICM chunks that we're dealing with. For instance, the amount of available ICM for MODIFY_ACTION is significantly lower than the usual STE ICM, so the threshold should account for that - otherwise we can deplete MODIFY_ACTION memory just by creating and deleting the same modify header action in a continuous loop. This patch replaces the hard-coded threshold with a dynamic value. Fixes: 1c58651412bb ("net/mlx5: DR, ICM memory pools sync optimization") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-23net/mlx5: DR, Don't allow match on IP w/o matching on full ethertype/ip_versionYevgeny Kliteynik
Currently SMFS allows adding rule with matching on src/dst IP w/o matching on full ethertype or ip_version, which is not supported by HW. This patch fixes this issue and adds the check as it is done in DMFS. Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-23net/mlx5: DR, Fix slab-out-of-bounds in mlx5_cmd_dr_create_fteYevgeny Kliteynik
When adding a rule with 32 destinations, we hit the following out-of-band access issue: BUG: KASAN: slab-out-of-bounds in mlx5_cmd_dr_create_fte+0x18ee/0x1e70 This patch fixes the issue by both increasing the allocated buffers to accommodate for the needed actions and by checking the number of actions to prevent this issue when a rule with too many actions is provided. Fixes: 1ffd498901c1 ("net/mlx5: DR, Increase supported num of actions to 32") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-23net/mlx5: DR, Cache STE shadow memoryYevgeny Kliteynik
During rule insertion on each ICM memory chunk we also allocate shadow memory used for management. This includes the hw_ste, dr_ste and miss list per entry. Since the scale of these allocations is large we noticed a performance hiccup that happens once malloc and free are stressed. In extreme usecases when ~1M chunks are freed at once, it might take up to 40 seconds to complete this, up to the point the kernel sees this as self-detected stall on CPU: rcu: INFO: rcu_sched self-detected stall on CPU To resolve this we will increase the reuse of shadow memory. Doing this we see that a time in the aforementioned usecase dropped from ~40 seconds to ~8-10 seconds. Fixes: 29cf8febd185 ("net/mlx5: DR, ICM pool memory allocator") Signed-off-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-23net/mlx5: Update the list of the PCI supported devicesMeir Lichtinger
Add the upcoming BlueField-4 and ConnectX-8 device IDs. Fixes: 2e9d3e83ab82 ("net/mlx5: Update the list of the PCI supported devices") Signed-off-by: Meir Lichtinger <meirl@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-23drm/amdgpu: check vm ready by amdgpu_vm->evicting flagQiang Yu
Workstation application ANSA/META v21.1.4 get this error dmesg when running CI test suite provided by ANSA/META: [drm:amdgpu_gem_va_ioctl [amdgpu]] *ERROR* Couldn't update BO_VA (-16) This is caused by: 1. create a 256MB buffer in invisible VRAM 2. CPU map the buffer and access it causes vm_fault and try to move it to visible VRAM 3. force visible VRAM space and traverse all VRAM bos to check if evicting this bo is valuable 4. when checking a VM bo (in invisible VRAM), amdgpu_vm_evictable() will set amdgpu_vm->evicting, but latter due to not in visible VRAM, won't really evict it so not add it to amdgpu_vm->evicted 5. before next CS to clear the amdgpu_vm->evicting, user VM ops ioctl will pass amdgpu_vm_ready() (check amdgpu_vm->evicted) but fail in amdgpu_vm_bo_update_mapping() (check amdgpu_vm->evicting) and get this error log This error won't affect functionality as next CS will finish the waiting VM ops. But we'd better clear the error log by checking the amdgpu_vm->evicting flag in amdgpu_vm_ready() to stop calling amdgpu_vm_bo_update_mapping() later. Another reason is amdgpu_vm->evicted list holds all BOs (both user buffer and page table), but only page table BOs' eviction prevent VM ops. amdgpu_vm->evicting flag is set only for page table BOs, so we should use evicting flag instead of evicted list in amdgpu_vm_ready(). The side effect of this change is: previously blocked VM op (user buffer in "evicted" list but no page table in it) gets done immediately. v2: update commit comments. Acked-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Qiang Yu <qiang.yu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-02-23drm/amdgpu: bypass tiling flag check in virtual display case (v2)Guchun Chen
vkms leverages common amdgpu framebuffer creation, and also as it does not support FB modifier, there is no need to check tiling flags when initing framebuffer when virtual display is enabled. This can fix below calltrace: amdgpu 0000:00:08.0: GFX9+ requires FB check based on format modifier WARNING: CPU: 0 PID: 1023 at drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:1150 amdgpu_display_framebuffer_init+0x8e7/0xb40 [amdgpu] v2: check adev->enable_virtual_display instead as vkms can be enabled in bare metal as well. Signed-off-by: Leslie Shi <Yuliang.Shi@amd.com> Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-23Revert "drm/amdgpu: add modifiers in amdgpu_vkms_plane_init()"Guchun Chen
This reverts commit 4046afcebfc3c8c0dd5666c2671b2c192b344f78. No need to support modifier in virtual kms, otherwise, in SRIOV mode, when lanuching X server, set crtc will fail due to mismatch between primary plane modifier and framebuffer modifier. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-23drm/amdgpu: do not enable asic reset for raven2Chen Gong
The GPU reset function of raven2 is not maintained or tested, so it should be very unstable. Now the amdgpu_asic_reset function is added to amdgpu_pmops_suspend, which causes the S3 test of raven2 to fail, so the asic_reset of raven2 is ignored here. Fixes: daf8de0874ab5b ("drm/amdgpu: always reset the asic in suspend (v2)") Signed-off-by: Chen Gong <curry.gong@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-02-23drm/amd/display: Fix stream->link_enc unassigned during stream removalNicholas Kazlauskas
[Why] Found when running igt@kms_atomic. Userspace attempts to do a TEST_COMMIT when 0 streams which calls dc_remove_stream_from_ctx. This in turn calls link_enc_unassign which ends up modifying stream->link = NULL directly, causing the global link_enc to be removed preventing further link activity and future link validation from passing. [How] We take care of link_enc unassignment at the start of link_enc_cfg_link_encs_assign so this call is no longer necessary. Fixes global state from being modified while unlocked. Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-02-23drm/amd: Check if ASPM is enabled from PCIe subsystemMario Limonciello
commit 0064b0ce85bb ("drm/amd/pm: enable ASPM by default") enabled ASPM by default but a variety of hardware configurations it turns out that this caused a regression. * PPC64LE hardware does not support ASPM at a hardware level. CONFIG_PCIEASPM is often disabled on these architectures. * Some dGPUs on ALD platforms don't work with ASPM enabled and PCIe subsystem disables it Check with the PCIe subsystem to see that ASPM has been enabled or not. Fixes: 0064b0ce85bb ("drm/amd/pm: enable ASPM by default") Link: https://wiki.raptorcs.com/w/images/a/ad/P9_PHB_version1.0_27July2018_pub.pdf Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1723 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1739 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1885 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1907 Tested-by: koba.ko@canonical.com Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-02-23gpio: Return EPROBE_DEFER if gc->to_irq is NULLShreeya Patel
We are racing the registering of .to_irq when probing the i2c driver. This results in random failure of touchscreen devices. Following explains the race condition better. [gpio driver] gpio driver registers gpio chip [gpio consumer] gpio is acquired [gpio consumer] gpiod_to_irq() fails with -ENXIO [gpio driver] gpio driver registers irqchip gpiod_to_irq works at this point, but -ENXIO is fatal We could see the following errors in dmesg logs when gc->to_irq is NULL [2.101857] i2c_hid i2c-FTS3528:00: HID over i2c has not been provided an Int IRQ [2.101953] i2c_hid: probe of i2c-FTS3528:00 failed with error -22 To avoid this situation, defer probing until to_irq is registered. Returning -EPROBE_DEFER would be the first step towards avoiding the failure of devices due to the race in registration of .to_irq. Final solution to this issue would be to avoid using gc irq members until they are fully initialized. This issue has been reported many times in past and people have been using workarounds like changing the pinctrl_amd to built-in instead of loading it as a module or by adding a softdep for pinctrl_amd into the config file. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209413 Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-02-23Merge tag 'for-5.17/parisc-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc unaligned handler fixes from Helge Deller: "Two patches which fix a few bugs in the unalignment handlers. The fldd and fstd instructions weren't handled at all on 32-bit kernels, the stw instruction didn't check for fault errors and the fldw_l and ldw_m were handled wrongly as integer vs floating point instructions. Both patches are tagged for stable series" * tag 'for-5.17/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc/unaligned: Fix ldw() and stw() unalignment handlers parisc/unaligned: Fix fldd and fstd unaligned handlers on 32-bit kernel
2022-02-23Merge tag 'hwmon-for-v5.17-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fix two old bugs and one new bug in the hwmon subsystem: - In pmbus core, clear pmbus fault/warning status bits after read to follow PMBus standard - In hwmon core, handle failure to register sensor with thermal zone correctly - In ntc_thermal driver, use valid thermistor names for Samsung thermistors" * tag 'hwmon-for-v5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (pmbus) Clear pmbus fault/warning bits after read hwmon: Handle failure to register sensor with thermal zone correctly hwmon: (ntc_thermistor) Underscore Samsung thermistor
2022-02-23Merge tag 'slab-for-5.17-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab Pull slab fixes from Vlastimil Babka: - Build fix (workaround) for clang. - Fix a /proc/kcore based slabinfo script broken by struct slab changes in 5.17-rc1. * tag 'slab-for-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: tools/cgroup/slabinfo: update to work with struct slab slab: remove __alloc_size attribute from __kmalloc_track_caller
2022-02-23RDMA/ib_srp: Fix a deadlockBart Van Assche
Remove the flush_workqueue(system_long_wq) call since flushing system_long_wq is deadlock-prone and since that call is redundant with a preceding cancel_work_sync() Link: https://lore.kernel.org/r/20220215210511.28303-3-bvanassche@acm.org Fixes: ef6c49d87c34 ("IB/srp: Eliminate state SRP_TARGET_DEAD") Reported-by: syzbot+831661966588c802aae9@syzkaller.appspotmail.com Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-02-23PCI: Mark all AMD Navi10 and Navi14 GPU ATS as brokenAlex Deucher
There are enough VBIOS escapes without the proper workaround that some users still hit this. Microsoft never productized ATS on Windows so OEM platforms that were Windows-only didn't always validate ATS. The advantages of ATS are not worth it compared to the potential instabilities on harvested boards. Disable ATS on all Navi10 and Navi14 boards. Symptoms include: amdgpu 0000:07:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0007 address=0xffffc02000 flags=0x0000] AMD-Vi: Event logged [IO_PAGE_FAULT device=07:00.0 domain=0x0007 address=0xffffc02000 flags=0x0000] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring sdma0 timeout, signaled seq=6047, emitted seq=6049 amdgpu 0000:07:00.0: amdgpu: GPU reset begin! amdgpu 0000:07:00.0: amdgpu: GPU reset succeeded, trying to resume amdgpu 0000:07:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring sdma0 test failed (-110) [drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block <sdma_v4_0> failed -110 amdgpu 0000:07:00.0: amdgpu: GPU reset(1) failed Related commits: e8946a53e2a6 ("PCI: Mark AMD Navi14 GPU ATS as broken") a2da5d8cc0b0 ("PCI: Mark AMD Raven iGPU ATS as broken in some platforms") 45beb31d3afb ("PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken") 5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken") d28ca864c493 ("PCI: Mark AMD Stoney Radeon R7 GPU ATS as broken") 9b44b0b09dec ("PCI: Mark AMD Stoney GPU ATS as broken") [bhelgaas: add symptoms and related commits] Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1760 Link: https://lore.kernel.org/r/20220222160801.841643-1-alexander.deucher@amd.com Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Guchun Chen <guchun.chen@amd.com>
2022-02-23parisc/unaligned: Fix ldw() and stw() unalignment handlersHelge Deller
Fix 3 bugs: a) emulate_stw() doesn't return the error code value, so faulting instructions are not reported and aborted. b) Tell emulate_ldw() to handle fldw_l as floating point instruction c) Tell emulate_ldw() to handle ldw_m as integer instruction Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org
2022-02-23parisc/unaligned: Fix fldd and fstd unaligned handlers on 32-bit kernelHelge Deller
Usually the kernel provides fixup routines to emulate the fldd and fstd floating-point instructions if they load or store 8-byte from/to a not natuarally aligned memory location. On a 32-bit kernel I noticed that those unaligned handlers didn't worked and instead the application got a SEGV. While checking the code I found two problems: First, the OPCODE_FLDD_L and OPCODE_FSTD_L cases were ifdef'ed out by the CONFIG_PA20 option, and as such those weren't built on a pure 32-bit kernel. This is now fixed by moving the CONFIG_PA20 #ifdef to prevent the compilation of OPCODE_LDD_L and OPCODE_FSTD_L only, and handling the fldd and fstd instructions. The second problem are two bugs in the 32-bit inline assembly code, where the wrong registers where used. The calculation of the natural alignment used %2 (vall) instead of %3 (ior), and the first word was stored back to address %1 (valh) instead of %3 (ior). Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org
2022-02-23btrfs: autodefrag: only scan one inode onceQu Wenruo
Although we have btrfs_requeue_inode_defrag(), for autodefrag we are still just exhausting all inode_defrag items in the tree. This means, it doesn't make much difference to requeue an inode_defrag, other than scan the inode from the beginning till its end. Change the behaviour to always scan from offset 0 of an inode, and till the end. By this we get the following benefit: - Straight-forward code - No more re-queue related check - Fewer members in inode_defrag We still keep the same btrfs_get_fs_root() and btrfs_iget() check for each loop, and added extra should_auto_defrag() check per-loop. Note: the patch needs to be backported and is intentionally written to minimize the diff size, code will be cleaned up later. CC: stable@vger.kernel.org # 5.16 Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-02-23btrfs: defrag: don't use merged extent map for their generation checkQu Wenruo
For extent maps, if they are not compressed extents and are adjacent by logical addresses and file offsets, they can be merged into one larger extent map. Such merged extent map will have the higher generation of all the original ones. But this brings a problem for autodefrag, as it relies on accurate extent_map::generation to determine if one extent should be defragged. For merged extent maps, their higher generation can mark some older extents to be defragged while the original extent map doesn't meet the minimal generation threshold. Thus this will cause extra IO. So solve the problem, here we introduce a new flag, EXTENT_FLAG_MERGED, to indicate if the extent map is merged from one or more ems. And for autodefrag, if we find a merged extent map, and its generation meets the generation requirement, we just don't use this one, and go back to defrag_get_extent() to read extent maps from subvolume trees. This could cause more read IO, but should result less defrag data write, so in the long run it should be a win for autodefrag. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-02-23btrfs: defrag: bring back the old file extent search behaviorQu Wenruo
For defrag, we don't really want to use btrfs_get_extent() to iterate all extent maps of an inode. The reasons are: - btrfs_get_extent() can merge extent maps And the result em has the higher generation of the two, causing defrag to mark unnecessary part of such merged large extent map. This in fact can result extra IO for autodefrag in v5.16+ kernels. However this patch is not going to completely solve the problem, as one can still using read() to trigger extent map reading, and got them merged. The completely solution for the extent map merging generation problem will come as an standalone fix. - btrfs_get_extent() caches the extent map result Normally it's fine, but for defrag the target range may not get another read/write for a long long time. Such cache would only increase the memory usage. - btrfs_get_extent() doesn't skip older extent map Unlike the old find_new_extent() which uses btrfs_search_forward() to skip the older subtree, thus it will pick up unnecessary extent maps. This patch will fix the regression by introducing defrag_get_extent() to replace the btrfs_get_extent() call. This helper will: - Not cache the file extent we found It will search the file extent and manually convert it to em. - Use btrfs_search_forward() to skip entire ranges which is modified in the past This should reduce the IO for autodefrag. Reported-by: Filipe Manana <fdmanana@suse.com> Fixes: 7b508037d4ca ("btrfs: defrag: use defrag_one_cluster() to implement btrfs_defrag_file()") Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-02-23btrfs: defrag: remove an ambiguous condition for rejectionQu Wenruo
From the very beginning of btrfs defrag, there is a check to reject extents which meet both conditions: - Physically adjacent We may want to defrag physically adjacent extents to reduce the number of extents or the size of subvolume tree. - Larger than 128K This may be there for compressed extents, but unfortunately 128K is exactly the max capacity for compressed extents. And the check is > 128K, thus it never rejects compressed extents. Furthermore, the compressed extent capacity bug is fixed by previous patch, there is no reason for that check anymore. The original check has a very small ranges to reject (the target extent size is > 128K, and default extent threshold is 256K), and for compressed extent it doesn't work at all. So it's better just to remove the rejection, and allow us to defrag physically adjacent extents. CC: stable@vger.kernel.org # 5.16 Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-02-23btrfs: defrag: don't defrag extents which are already at max capacityQu Wenruo
[BUG] For compressed extents, defrag ioctl will always try to defrag any compressed extents, wasting not only IO but also CPU time to compress/decompress: mkfs.btrfs -f $DEV mount -o compress $DEV $MNT xfs_io -f -c "pwrite -S 0xab 0 128K" $MNT/foobar sync xfs_io -f -c "pwrite -S 0xcd 128K 128K" $MNT/foobar sync echo "=== before ===" xfs_io -c "fiemap -v" $MNT/foobar btrfs filesystem defrag $MNT/foobar sync echo "=== after ===" xfs_io -c "fiemap -v" $MNT/foobar Then it shows the 2 128K extents just get COW for no extra benefit, with extra IO/CPU spent: === before === /mnt/btrfs/file1: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..255]: 26624..26879 256 0x8 1: [256..511]: 26632..26887 256 0x9 === after === /mnt/btrfs/file1: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..255]: 26640..26895 256 0x8 1: [256..511]: 26648..26903 256 0x9 This affects not only v5.16 (after the defrag rework), but also v5.15 (before the defrag rework). [CAUSE] From the very beginning, btrfs defrag never checks if one extent is already at its max capacity (128K for compressed extents, 128M otherwise). And the default extent size threshold is 256K, which is already beyond the compressed extent max size. This means, by default btrfs defrag ioctl will mark all compressed extent which is not adjacent to a hole/preallocated range for defrag. [FIX] Introduce a helper to grab the maximum extent size, and then in defrag_collect_targets() and defrag_check_next_extent(), reject extents which are already at their max capacity. Reported-by: Filipe Manana <fdmanana@suse.com> CC: stable@vger.kernel.org # 5.16 Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-02-23btrfs: defrag: don't try to merge regular extents with preallocated extentsQu Wenruo
[BUG] With older kernels (before v5.16), btrfs will defrag preallocated extents. While with newer kernels (v5.16 and newer) btrfs will not defrag preallocated extents, but it will defrag the extent just before the preallocated extent, even it's just a single sector. This can be exposed by the following small script: mkfs.btrfs -f $dev > /dev/null mount $dev $mnt xfs_io -f -c "pwrite 0 4k" -c sync -c "falloc 4k 16K" $mnt/file xfs_io -c "fiemap -v" $mnt/file btrfs fi defrag $mnt/file sync xfs_io -c "fiemap -v" $mnt/file The output looks like this on older kernels: /mnt/btrfs/file: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..7]: 26624..26631 8 0x0 1: [8..39]: 26632..26663 32 0x801 /mnt/btrfs/file: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..39]: 26664..26703 40 0x1 Which defrags the single sector along with the preallocated extent, and replace them with an regular extent into a new location (caused by data COW). This wastes most of the data IO just for the preallocated range. On the other hand, v5.16 is slightly better: /mnt/btrfs/file: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..7]: 26624..26631 8 0x0 1: [8..39]: 26632..26663 32 0x801 /mnt/btrfs/file: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..7]: 26664..26671 8 0x0 1: [8..39]: 26632..26663 32 0x801 The preallocated range is not defragged, but the sector before it still gets defragged, which has no need for it. [CAUSE] One of the function reused by the old and new behavior is defrag_check_next_extent(), it will determine if we should defrag current extent by checking the next one. It only checks if the next extent is a hole or inlined, but it doesn't check if it's preallocated. On the other hand, out of the function, both old and new kernel will reject preallocated extents. Such inconsistent behavior causes above behavior. [FIX] - Also check if next extent is preallocated If so, don't defrag current extent. - Add comments for each branch why we reject the extent This will reduce the IO caused by defrag ioctl and autodefrag. CC: stable@vger.kernel.org # 5.16 Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-02-23nvme-tcp: send H2CData PDUs based on MAXH2CDATAVarun Prakash
As per NVMe/TCP specification (revision 1.0a, section 3.6.2.3) Maximum Host to Controller Data length (MAXH2CDATA): Specifies the maximum number of PDU-Data bytes per H2CData PDU in bytes. This value is a multiple of dwords and should be no less than 4,096. Current code sets H2CData PDU data_length to r2t_length, it does not check MAXH2CDATA value. Fix this by setting H2CData PDU data_length to min(req->h2cdata_left, queue->maxh2cdata). Also validate MAXH2CDATA value returned by target in ICResp PDU, if it is not a multiple of dword or if it is less than 4096 return -EINVAL from nvme_tcp_init_connection(). Signed-off-by: Varun Prakash <varun@chelsio.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-02-23nvme: also mark passthrough-only namespaces ready in nvme_update_ns_infoChristoph Hellwig
Commit e7d65803e2bb ("nvme-multipath: revalidate paths during rescan") introduced the NVME_NS_READY flag, which nvme_path_is_disabled() uses to check if a path can be used or not. We also need to set this flag for devices that fail the ZNS feature validation and which are available through passthrough devices only to that they can be used in multipathing setups. Fixes: e7d65803e2bb ("nvme-multipath: revalidate paths during rescan") Reported-by: Kanchan Joshi <joshi.k@samsung.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Daniel Wagner <dwagner@suse.de> Tested-by: Kanchan Joshi <joshi.k@samsung.com>
2022-02-23nvme: don't return an error from nvme_configure_metadataChristoph Hellwig
When a fabrics controller claims to support an invalidate metadata configuration we already warn and disable metadata support. No need to also return an error during revalidation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Daniel Wagner <dwagner@suse.de> Tested-by: Kanchan Joshi <joshi.k@samsung.com>
2022-02-23drm/edid: Always set RGB444Maxime Ripard
In order to fill the drm_display_info structure each time an EDID is read, the code currently will call drm_add_display_info with the parsed EDID. drm_add_display_info will then call drm_reset_display_info to reset all the fields to 0, and then set them to the proper value depending on the EDID. In the color_formats case, we will thus report that we don't support any color format, and then fill it back with RGB444 plus the additional formats described in the EDID Feature Support byte. However, since that byte only contains format-related bits since the 1.4 specification, this doesn't happen if the EDID is following an earlier specification. In turn, it means that for one of these EDID, we end up with color_formats set to 0. The EDID 1.3 specification never really specifies what it means by RGB exactly, but since both HDMI and DVI will use RGB444, it's fairly safe to assume it's supposed to be RGB444. Let's move the addition of RGB444 to color_formats earlier in drm_add_display_info() so that it's always set for a digital display. Fixes: da05a5a71ad8 ("drm: parse color format support for digital displays") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reported-by: Matthias Reichl <hias@horus.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220203115416.1137308-1-maxime@cerno.tech
2022-02-23Merge branch 'ftgmac100-fixes'David S. Miller
Heyi Guo says: ==================== drivers/net/ftgmac100: fix occasional DHCP failure This patch set is to fix the issues discussed in the mail thread: https://lore.kernel.org/netdev/51f5b7a7-330f-6b3c-253d-10e45cdb6805@linux.alibaba.com/ and follows the advice from Andrew Lunn. The first 2 patches refactors the code to enable adjust_link calling reset function directly. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-23drivers/net/ftgmac100: fix DHCP potential failure with systemdHeyi Guo
DHCP failures were observed with systemd 247.6. The issue could be reproduced by rebooting Aspeed 2600 and then running ifconfig ethX down/up. It is caused by below procedures in the driver: 1. ftgmac100_open() enables net interface and call phy_start() 2. When PHY is link up, it calls netif_carrier_on() and then adjust_link callback 3. ftgmac100_adjust_link() will schedule the reset task 4. ftgmac100_reset_task() will then reset the MAC in another schedule After step 2, systemd will be notified to send DHCP discover packet, while the packet might be corrupted by MAC reset operation in step 4. Call ftgmac100_reset() directly instead of scheduling task to fix the issue. Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-23drivers/net/ftgmac100: adjust code place for function call dependencyHeyi Guo
This is to prepare for ftgmac100_adjust_link() to call ftgmac100_reset() directly. Only code places are changed. Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-23drivers/net/ftgmac100: refactor ftgmac100_reset_task to enable direct ↵Heyi Guo
function call This is to prepare for ftgmac100_adjust_link() to call reset function directly, instead of task schedule. Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-23net: sched: avoid newline at end of message in NL_SET_ERR_MSG_MODWan Jiabing
Fix following coccicheck warning: ./net/sched/act_api.c:277:7-49: WARNING avoid newline at end of message in NL_SET_ERR_MSG_MOD Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-23MAINTAINERS: add myself as co-maintainer for Realtek DSA switch driversAlvin Šipraga
Adding myself (Alvin Šipraga) as another maintainer for the Realtek DSA switch drivers. I intend to help Linus out with reviewing and testing changes to these drivers, particularly the rtl8365mb driver which I authored and have hardware access to. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-23tipc: Fix end of loop tests for list_for_each_entry()Dan Carpenter
These tests are supposed to check if the loop exited via a break or not. However the tests are wrong because if we did not exit via a break then "p" is not a valid pointer. In that case, it's the equivalent of "if (*(u32 *)sr == *last_key) {". That's going to work most of the time, but there is a potential for those to be equal. Fixes: 1593123a6a49 ("tipc: add name table dump to new netlink api") Fixes: 1a1a143daf84 ("tipc: add publication dump to new netlink api") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-15 23:53:25 +0000