| Age | Commit message (Collapse) | Author |
|---|
|
Similarly to kmsan_vmap_pages_range_noflush(), kmsan_ioremap_page_range()
must also properly handle allocation/mapping failures. In the case of
such, it must clean up the already created metadata mappings and return an
error code, so that the error can be propagated to ioremap_page_range().
Without doing so, KMSAN may silently fail to bring the metadata for the
page range into a consistent state, which will result in user-visible
crashes when trying to access them.
Link: https://lkml.kernel.org/r/20230413131223.4135168-2-glider@google.com
Fixes: b073d7f8aee4 ("mm: kmsan: maintain KMSAN metadata for page operations")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Dipanjan Das <mail.dipanjan.das@gmail.com>
Link: https://lore.kernel.org/linux-mm/CANX2M5ZRrRA64k0hOif02TjmY9kbbO2aCBPyq79es34RXZ=cAw@mail.gmail.com/
Reviewed-by: Marco Elver <elver@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As reported by Dipanjan Das, when KMSAN is used together with kernel fault
injection (or, generally, even without the latter), calls to kcalloc() or
__vmap_pages_range_noflush() may fail, leaving the metadata mappings for
the virtual mapping in an inconsistent state. When these metadata
mappings are accessed later, the kernel crashes.
To address the problem, we return a non-zero error code from
kmsan_vmap_pages_range_noflush() in the case of any allocation/mapping
failure inside it, and make vmap_pages_range_noflush() return an error if
KMSAN fails to allocate the metadata.
This patch also removes KMSAN_WARN_ON() from vmap_pages_range_noflush(),
as these allocation failures are not fatal anymore.
Link: https://lkml.kernel.org/r/20230413131223.4135168-1-glider@google.com
Fixes: b073d7f8aee4 ("mm: kmsan: maintain KMSAN metadata for page operations")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Dipanjan Das <mail.dipanjan.das@gmail.com>
Link: https://lore.kernel.org/linux-mm/CANX2M5ZRrRA64k0hOif02TjmY9kbbO2aCBPyq79es34RXZ=cAw@mail.gmail.com/
Reviewed-by: Marco Elver <elver@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 799fb82aa132 ("tools/vm: rename tools/vm to tools/mm") missed
renaming 'vm' in 'tools/Makefile' to 'mm'. As a result, 'make clean'
under 'tools/' directory fails as below:
$ make -C tools clean
DESCEND vm
make[1]: Entering directory '/linux/tools/vm'
make[1]: *** No rule to make target 'clean'. Stop.
make[1]: Leaving directory '/linux/tools/vm'
make: *** [Makefile:173: vm_clean] Error 2
make: Leaving directory '/linux/tools'
Do the missed rename.
Link: https://lkml.kernel.org/r/20230415203110.13858-1-sj@kernel.org
Fixes: 799fb82aa132 ("tools/vm: rename tools/vm to tools/mm")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Ricardo Pardini <ricardo@pardini.net>
Link: https://lore.kernel.org/linux-mm/20230415202454.13558-1-sj@kernel.org/
Tested-by: Ricardo Pardini <ricardo@pardini.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
commit f1a7941243c1 ("mm: convert mm's rss stats into percpu_counter")
introduces a memory leak by missing a call to destroy_context() when a
percpu_counter fails to allocate.
Before introducing the per-cpu counter allocations, init_new_context() was
the last call that could fail in mm_init(), and thus there was no need to
ever invoke destroy_context() in the error paths. Adding the following
percpu counter allocations adds error paths after init_new_context(),
which means its associated destroy_context() needs to be called when
percpu counters fail to allocate.
Link: https://lkml.kernel.org/r/20230330133822.66271-1-mathieu.desnoyers@efficios.com
Fixes: f1a7941243c1 ("mm: convert mm's rss stats into percpu_counter")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
syzbot is reporting circular locking dependency which involves
zonelist_update_seq seqlock [1], for this lock is checked by memory
allocation requests which do not need to be retried.
One deadlock scenario is kmalloc(GFP_ATOMIC) from an interrupt handler.
CPU0
----
__build_all_zonelists() {
write_seqlock(&zonelist_update_seq); // makes zonelist_update_seq.seqcount odd
// e.g. timer interrupt handler runs at this moment
some_timer_func() {
kmalloc(GFP_ATOMIC) {
__alloc_pages_slowpath() {
read_seqbegin(&zonelist_update_seq) {
// spins forever because zonelist_update_seq.seqcount is odd
}
}
}
}
// e.g. timer interrupt handler finishes
write_sequnlock(&zonelist_update_seq); // makes zonelist_update_seq.seqcount even
}
This deadlock scenario can be easily eliminated by not calling
read_seqbegin(&zonelist_update_seq) from !__GFP_DIRECT_RECLAIM allocation
requests, for retry is applicable to only __GFP_DIRECT_RECLAIM allocation
requests. But Michal Hocko does not know whether we should go with this
approach.
Another deadlock scenario which syzbot is reporting is a race between
kmalloc(GFP_ATOMIC) from tty_insert_flip_string_and_push_buffer() with
port->lock held and printk() from __build_all_zonelists() with
zonelist_update_seq held.
CPU0 CPU1
---- ----
pty_write() {
tty_insert_flip_string_and_push_buffer() {
__build_all_zonelists() {
write_seqlock(&zonelist_update_seq);
build_zonelists() {
printk() {
vprintk() {
vprintk_default() {
vprintk_emit() {
console_unlock() {
console_flush_all() {
console_emit_next_record() {
con->write() = serial8250_console_write() {
spin_lock_irqsave(&port->lock, flags);
tty_insert_flip_string() {
tty_insert_flip_string_fixed_flag() {
__tty_buffer_request_room() {
tty_buffer_alloc() {
kmalloc(GFP_ATOMIC | __GFP_NOWARN) {
__alloc_pages_slowpath() {
zonelist_iter_begin() {
read_seqbegin(&zonelist_update_seq); // spins forever because zonelist_update_seq.seqcount is odd
spin_lock_irqsave(&port->lock, flags); // spins forever because port->lock is held
}
}
}
}
}
}
}
}
spin_unlock_irqrestore(&port->lock, flags);
// message is printed to console
spin_unlock_irqrestore(&port->lock, flags);
}
}
}
}
}
}
}
}
}
write_sequnlock(&zonelist_update_seq);
}
}
}
This deadlock scenario can be eliminated by
preventing interrupt context from calling kmalloc(GFP_ATOMIC)
and
preventing printk() from calling console_flush_all()
while zonelist_update_seq.seqcount is odd.
Since Petr Mladek thinks that __build_all_zonelists() can become a
candidate for deferring printk() [2], let's address this problem by
disabling local interrupts in order to avoid kmalloc(GFP_ATOMIC)
and
disabling synchronous printk() in order to avoid console_flush_all()
.
As a side effect of minimizing duration of zonelist_update_seq.seqcount
being odd by disabling synchronous printk(), latency at
read_seqbegin(&zonelist_update_seq) for both !__GFP_DIRECT_RECLAIM and
__GFP_DIRECT_RECLAIM allocation requests will be reduced. Although, from
lockdep perspective, not calling read_seqbegin(&zonelist_update_seq) (i.e.
do not record unnecessary locking dependency) from interrupt context is
still preferable, even if we don't allow calling kmalloc(GFP_ATOMIC)
inside
write_seqlock(&zonelist_update_seq)/write_sequnlock(&zonelist_update_seq)
section...
Link: https://lkml.kernel.org/r/8796b95c-3da3-5885-fddd-6ef55f30e4d3@I-love.SAKURA.ne.jp
Fixes: 3d36424b3b58 ("mm/page_alloc: fix race condition between build_all_zonelists and page allocation")
Link: https://lkml.kernel.org/r/ZCrs+1cDqPWTDFNM@alley [2]
Reported-by: syzbot <syzbot+223c7461c58c58a4cb10@syzkaller.appspotmail.com>
Link: https://syzkaller.appspot.com/bug?extid=223c7461c58c58a4cb10 [1]
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Petr Mladek <pmladek@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Patrick Daly <quic_pdaly@quicinc.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Linux Security Modules (LSMs) that implement the "capable" hook will
usually emit an access denial message to the audit log whenever they
"block" the current task from using the given capability based on their
security policy.
The occurrence of a denial is used as an indication that the given task
has attempted an operation that requires the given access permission, so
the callers of functions that perform LSM permission checks must take care
to avoid calling them too early (before it is decided if the permission is
actually needed to perform the requested operation).
The __sys_setres[ug]id() functions violate this convention by first
calling ns_capable_setid() and only then checking if the operation
requires the capability or not. It means that any caller that has the
capability granted by DAC (task's capability set) but not by MAC (LSMs)
will generate a "denied" audit record, even if is doing an operation for
which the capability is not required.
Fix this by reordering the checks such that ns_capable_setid() is checked
last and -EPERM is returned immediately if it returns false.
While there, also do two small optimizations:
* move the capability check before prepare_creds() and
* bail out early in case of a no-op.
Link: https://lkml.kernel.org/r/20230217162154.837549-1-omosnace@redhat.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
flag
For veth pairs, NETDEV_XDP_ACT_NDO_XMIT is supported by the current
device if the peer one is running a XDP program or if it has GRO enabled.
Fix the xdp_features flags reporting considering peer device and not
current one for NETDEV_XDP_ACT_NDO_XMIT.
Fixes: fccca038f300 ("veth: take into account device reconfiguration for xdp_features flag")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/4f1ca6f6f6b42ae125bfdb5c7782217c83968b2e.1681767806.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC host:
- sdhci_am654: Fix support for UHS-I SDR12 and SDR25 speed modes
MEMSTICK:
- Fix memory leak if card device never gets registered"
* tag 'mmc-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
memstick: fix memory leak if card device is never registered
mmc: sdhci_am654: Set HIGH_SPEED_ENA for SDR12 and SDR25
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are a number of updates for devicetree files for Qualcomm,
Rockchips, and NXP i.MX platforms, addressing mistakes in the DT
contents:
- Wrong GPIO polarity on some boards
- Lower SD card interface speed for better stability
- Incorrect power supply, clock, pmic, cache properties
- Disable broken hbr3 on sc7280-herobrine
- Devicetree warning fixes
The only other changes are:
- A regression fix for the Amlogic performance monitoring unit
driver, along with two related DT changes.
- imx_v6_v7_defconfig enables PCI support again.
- Trivial fixes for tee, optee and psci firmware drivers, addressing
compiler warning and error output"
* tag 'arm-fixes-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits)
firmware/psci: demote suspend-mode warning to info level
arm64: dts: qcom: sc7280: remove hbr3 support on herobrine boards
ARM: imx_v6_v7_defconfig: Fix unintentional disablement of PCI
arm64: dts: rockchip: correct panel supplies on some rk3326 boards
arm64: dts: rockchip: use just "port" in panel on RockPro64
arm64: dts: rockchip: use just "port" in panel on Pinebook Pro
ARM: dts: imx6ull-colibri: Remove unnecessary #address-cells/#size-cells
ARM: dts: imx7d-remarkable2: Remove unnecessary #address-cells/#size-cells
arm64: dts: imx8mp-verdin: correct off-on-delay
arm64: dts: imx8mm-verdin: correct off-on-delay
arm64: dts: imx8mm-evk: correct pmic clock source
arm64: dts: qcom: sc8280xp-pmics: fix pon compatible and registers
arm64: dts: rockchip: Remove non-existing pwm-delay-us property
arm64: dts: rockchip: Add clk_rtc_32k to Anbernic xx3 Devices
tee: Pass a pointer to virt_to_page()
perf/amlogic: adjust register offsets
arm64: dts: meson-g12-common: resolve conflict between canvas & pmu
arm64: dts: meson-g12-common: specify full DMC range
arm64: dts: imx8mp: fix address length for LCDIF2
riscv: dts: canaan: drop invalid spi-max-frequency
...
|
|
These got*, plt* and .text.ftrace_trampoline sections specified for
LoongArch have non-zero addressses. Non-zero section addresses in a
relocatable ELF would confuse GDB when it tries to compute the section
offsets and it ends up printing wrong symbol addresses. Therefore, set
them to zero, which mirrors the change in commit 5d8591bc0fbaeb6ded
("arm64 module: set plt* section addresses to 0x0").
Cc: stable@vger.kernel.org
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
vm_map_base, empty_zero_page and invalid_pmd_table could be accessed
widely by some out-of-tree non-GPL but important file systems or drivers
(e.g. OpenZFS). Let's use EXPORT_SYMBOL() instead of EXPORT_SYMBOL_GPL()
to export them, so as to avoid build errors.
1, Details about vm_map_base:
This is a LoongArch-specific symbol and may be referenced through macros
PCI_IOBASE, VMALLOC_START and VMALLOC_END.
2, Details about empty_zero_page:
As it stands today, only 3 architectures export empty_zero_page as a GPL
symbol: IA64, LoongArch and MIPS. LoongArch gets the GPL export by
inheriting from MIPS, and the MIPS export was first introduced in commit
497d2adcbf50b ("[MIPS] Export empty_zero_page for sake of the ext4
module."). The IA64 export was similar: commit a7d57ecf4216e ("[IA64]
Export three symbols for module use") did so for kvm.
In both IA64 and MIPS, the export of empty_zero_page was done for
satisfying some in-kernel component built as module (kvm and ext4
respectively), and given its reasonably low-level nature, GPL is a
reasonable choice. But looking at the bigger picture it is evident most
other architectures do not regard it as GPL, so in effect the symbol
probably should not be treated as such, in favor of consistency.
3, Details about invalid_pmd_table:
Keep consistency with invalid_pte_table and make it be possible by some
modules.
Cc: stable@vger.kernel.org
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Some firmwares don't enable PG when wakeup from suspend, so do it in
kernel. This can improve code compatibility for boot kernel.
Signed-off-by: Baoqi Zhang <zhangbaoqi@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Addresses should all be of unsigned type to avoid unnecessary conversions.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
We can see the following build error on LoongArch if CONFIG_SUSPEND is
not set:
ld: drivers/acpi/sleep.o: in function 'acpi_pm_prepare':
sleep.c:(.text+0x2b8): undefined reference to 'loongarch_wakeup_start'
Here is the call trace:
acpi_pm_prepare()
__acpi_pm_prepare()
acpi_sleep_prepare()
acpi_get_wakeup_address()
loongarch_wakeup_start()
Root cause: loongarch_wakeup_start() is defined in arch/loongarch/power/
suspend_asm.S which is only built under CONFIG_SUSPEND. In order to fix
the build error, just let acpi_get_wakeup_address() return 0 if CONFIG_
SUSPEND is not set.
Fixes: 366bb35a8e48 ("LoongArch: Add suspend (ACPI S3) support")
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/all/11215033-fa3c-ecb1-2fc0-e9aeba47be9b@infradead.org/
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Not all LoongArch processors support CRC32 instructions. This feature
is indicated by CPUCFG1.CRC32 (Bit25) but it is wrongly defined in the
previous versions of the ISA manual (and so does in loongarch.h). The
CRC32 feature is set unconditionally now, so fix it.
BTW, expose the CRC32 feature in /proc/cpuinfo.
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LoongArch maintains cache coherency in hardware, but when paired with
LS7A chipsets the WUC attribute (Weak-ordered UnCached, which is similar
to WriteCombine) is out of the scope of cache coherency machanism for
PCIe devices (this is a PCIe protocol violation, which may be fixed in
newer chipsets).
This means WUC can only used for write-only memory regions now, so this
option is disabled by default, making WUC silently fallback to SUC for
ioremap(). You can enable this option if the kernel is ensured to run on
hardware without this bug.
Kernel parameter writecombine=on/off can be used to override the Kconfig
option.
Cc: stable@vger.kernel.org
Suggested-by: WANG Xuerui <kernel@xen0n.name>
Reviewed-by: WANG Xuerui <kernel@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Function mlxfw_mfa2_tlv_multi_get() returns NULL if 'tlv' in
question does not pass checks in mlxfw_mfa2_tlv_payload_get(). This
behaviour may lead to NULL pointer dereference in 'multi->total_len'.
Fix this issue by testing mlxfw_mfa2_tlv_multi_get()'s return value
against NULL.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 410ed13cae39 ("Add the mlxfw module for Mellanox firmware flash process")
Co-developed-by: Natalia Petrova <n.petrova@fintech.ru>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230417120718.52325-1-n.zhandarovich@fintech.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Michael Chan says:
====================
bnxt_en: Bug fixes
This small series contains 2 fixes. The first one fixes the PTP
initialization logic on older chips to avoid logging a warning. The
second one fixes a potenial NULL pointer dereference in the driver's
aux bus unload path.
====================
Link: https://lore.kernel.org/r/20230417065819.122055-1-michael.chan@broadcom.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In the driver unload path, the driver currently checks the valid
BNXT_FLAG_ROCE_CAP flag in bnxt_rdma_aux_device_uninit() before
proceeding. This is flawed because the flag may not be set initially
during driver load. It may be set later after the NVRAM setting is
changed followed by a firmware reset. Relying on the
BNXT_FLAG_ROCE_CAP flag may crash in bnxt_rdma_aux_device_uninit() if
the aux device was never initialized:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
PGD 8ae6aa067 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 39 PID: 42558 Comm: rmmod Kdump: loaded Tainted: G OE --------- - - 4.18.0-348.el8.x86_64 #1
Hardware name: Dell Inc. PowerEdge R750/0WT8Y6, BIOS 1.5.4 12/17/2021
RIP: 0010:device_del+0x1b/0x410
Code: 89 a5 50 03 00 00 4c 89 a5 58 03 00 00 eb 89 0f 1f 44 00 00 41 56 41 55 41 54 4c 8d a7 80 00 00 00 55 53 48 89 fb 48 83 ec 18 <48> 8b 2f 4c 89 e7 65 48 8b 04 25 28 00 00 00 48 89 44 24 10 31 c0
RSP: 0018:ff7f82bf469a7dc8 EFLAGS: 00010292
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000206 RDI: 0000000000000000
RBP: ff31b7cd114b0ac0 R08: 0000000000000000 R09: ffffffff935c3400
R10: ff31b7cd45bc3440 R11: 0000000000000001 R12: 0000000000000080
R13: ffffffffc1069f40 R14: 0000000000000000 R15: 0000000000000000
FS: 00007fc9903ce740(0000) GS:ff31b7d4ffac0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000992fee004 CR4: 0000000000773ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
bnxt_rdma_aux_device_uninit+0x1f/0x30 [bnxt_en]
bnxt_remove_one+0x2f/0x1f0 [bnxt_en]
pci_device_remove+0x3b/0xc0
device_release_driver_internal+0x103/0x1f0
driver_detach+0x54/0x88
bus_remove_driver+0x77/0xc9
pci_unregister_driver+0x2d/0xb0
bnxt_exit+0x16/0x2c [bnxt_en]
__x64_sys_delete_module+0x139/0x280
do_syscall_64+0x5b/0x1a0
entry_SYSCALL_64_after_hwframe+0x65/0xca
RIP: 0033:0x7fc98f3af71b
Fix this by modifying the check inside bnxt_rdma_aux_device_uninit()
to check for bp->aux_priv instead. We also need to make some changes
in bnxt_rdma_aux_device_init() to make sure that bp->aux_priv is set
only when the aux device is fully initialized.
Fixes: d80d88b0dfff ("bnxt_en: Add auxiliary driver support")
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The driver does not support PTP on these older chips and it is assuming
that firmware on these older chips will not return the
PORT_MAC_PTP_QCFG_RESP_FLAGS_HWRM_ACCESS flag in __bnxt_hwrm_ptp_qcfg(),
causing the function to abort quietly.
But newer firmware now sets this flag and so __bnxt_hwrm_ptp_qcfg()
will proceed further. Eventually it will fail in bnxt_ptp_init() ->
bnxt_map_ptp_regs() because there is no code to support the older chips.
The driver will then complain:
"PTP initialization failed.\n"
Fix it so that we abort quietly earlier without going through the
unnecessary steps and alarming the user with the warning log.
Fixes: ae5c42f0b92c ("bnxt_en: Get PTP hardware capability from firmware")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
elements
If NFT_SET_ELEM_CATCHALL is set on, then userspace provides no set element
key. Otherwise, bail out with -EINVAL.
Fixes: aaa31047a6d2 ("netfilter: nftables: add catch-all set element support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The flower_stats_timer can schedule flower_stats_work and
flower_stats_work can also arm the flower_stats_timer. The
process is shown below:
----------- timer schedules work ------------
ch_flower_stats_cb() //timer handler
schedule_work(&adap->flower_stats_work);
----------- work arms timer ------------
ch_flower_stats_handler() //workqueue callback function
mod_timer(&adap->flower_stats_timer, ...);
When the cxgb4 device is detaching, the timer and workqueue
could still be rearmed. The process is shown below:
(cleanup routine) | (timer and workqueue routine)
remove_one() |
free_some_resources() | ch_flower_stats_cb() //timer
cxgb4_cleanup_tc_flower() | schedule_work()
del_timer_sync() |
| ch_flower_stats_handler() //workqueue
| mod_timer()
cancel_work_sync() |
kfree(adapter) //FREE | ch_flower_stats_cb() //timer
| adap->flower_stats_work //USE
This patch changes del_timer_sync() to timer_shutdown_sync(),
which could prevent rearming of the timer from the workqueue.
Fixes: e0f911c81e93 ("cxgb4: fetch stats for offloaded tc flower flows")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20230415081227.7463-1-duoming@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
catch-all set element might jump/goto to chain that uses expressions
that require validation.
Fixes: aaa31047a6d2 ("netfilter: nftables: add catch-all set element support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Commit e523af4ee560 ("net/ice: Add support for enable_iwarp and enable_roce
devlink param") added support for the enable_roce and enable_iwarp
parameters in the ice driver. It didn't document these parameters in the
ice devlink documentation file. Add this documentation, including a note
about the mutual exclusion between the two modes.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230414162614.571861-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add error handling of i40e_setup_misc_vector() in i40e_rebuild().
In case interrupt vectors setup fails do not re-open vsi-s and
do not bring up vf-s, we have no interrupts to serve a traffic
anyway.
Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fix accessing vsi->active_filters without holding the mac_filter_hash_lock.
Move vsi->active_filters = 0 inside critical section and
move clear_bit(__I40E_VSI_OVERFLOW_PROMISC, vsi->state) after the critical
section to ensure the new filters from other threads can be added only after
filters cleaning in the critical section is finished.
Fixes: 278e7d0b9d68 ("i40e: store MAC/VLAN filters in a hash with the MAC Address as key")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Scott reports that when the new GSS krb5 Kunit tests are built as
a separate module and loaded, the RFC 6803 and RFC 8009 checksum
tests all fail, even though they pass when run under kunit.py.
It appears that passing a buffer backed by static const memory to
gss_krb5_checksum() is a problem. A printk in checksum_case() shows
the correct plaintext, but by the time the buffer has been converted
to a scatterlist and arrives at checksummer(), it contains all
zeroes.
Replacing this buffer with one that is dynamically allocated fixes
the issue.
Reported-by: Scott Mayhew <smayhew@redhat.com>
Fixes: 02142b2ca8fc ("SUNRPC: Add checksum KUnit tests for the RFC 6803 encryption types")
Tested-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
nftables can be built as a module, so fix the preprocessor conditional
accordingly.
Fixes: 478b360a47b7 ("netfilter: nf_tables: fix nf_trace always-on with XT_TRACE=n")
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Palash reports a UAF when using a modified version of syzkaller[1].
When 'tcf_exts_miss_cookie_base_alloc()' fails in 'tcf_exts_init_ex()'
a call to 'tcf_exts_destroy()' is made to free up the tcf_exts
resources.
In flower, a call to '__fl_put()' when 'tcf_exts_init_ex()' fails is made;
Then calling 'tcf_exts_destroy()', which triggers an UAF since the
already freed tcf_exts action pointer is lingering in the struct.
Before the offending patch, this was not an issue since there was no
case where the tcf_exts action pointer could linger. Therefore, restore
the old semantic by clearing the action pointer in case of a failure to
initialize the miss_cookie.
[1] https://github.com/cmu-pasta/linux-kernel-enriched-corpus
v1->v2: Fix compilation on configs without tc actions (kernel test robot)
Fixes: 80cd22c35c90 ("net/sched: cls_api: Support hardware miss to tc action")
Reported-by: Palash Oswal <oswalpalash@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a use-after-free scenario that is:
When the NIC is down, user set mac address or vlan tag to VF,
the xxx_set_vf_mac() or xxx_set_vf_vlan() will invoke efx_net_stop()
and efx_net_open(), since netif_running() is false, the port will not
start and keep port_enabled false, but selftest_work is scheduled
in efx_net_open().
If we remove the device before selftest_work run, the efx_stop_port()
will not be called since the NIC is down, and then efx is freed,
we will soon get a UAF in run_timer_softirq() like this:
[ 1178.907941] ==================================================================
[ 1178.907948] BUG: KASAN: use-after-free in run_timer_softirq+0xdea/0xe90
[ 1178.907950] Write of size 8 at addr ff11001f449cdc80 by task swapper/47/0
[ 1178.907950]
[ 1178.907953] CPU: 47 PID: 0 Comm: swapper/47 Kdump: loaded Tainted: G O --------- -t - 4.18.0 #1
[ 1178.907954] Hardware name: SANGFOR X620G40/WI2HG-208T1061A, BIOS SPYH051032-U01 04/01/2022
[ 1178.907955] Call Trace:
[ 1178.907956] <IRQ>
[ 1178.907960] dump_stack+0x71/0xab
[ 1178.907963] print_address_description+0x6b/0x290
[ 1178.907965] ? run_timer_softirq+0xdea/0xe90
[ 1178.907967] kasan_report+0x14a/0x2b0
[ 1178.907968] run_timer_softirq+0xdea/0xe90
[ 1178.907971] ? init_timer_key+0x170/0x170
[ 1178.907973] ? hrtimer_cancel+0x20/0x20
[ 1178.907976] ? sched_clock+0x5/0x10
[ 1178.907978] ? sched_clock_cpu+0x18/0x170
[ 1178.907981] __do_softirq+0x1c8/0x5fa
[ 1178.907985] irq_exit+0x213/0x240
[ 1178.907987] smp_apic_timer_interrupt+0xd0/0x330
[ 1178.907989] apic_timer_interrupt+0xf/0x20
[ 1178.907990] </IRQ>
[ 1178.907991] RIP: 0010:mwait_idle+0xae/0x370
If the NIC is not actually brought up, there is no need to schedule
selftest_work, so let's move invoking efx_selftest_async_start()
into efx_start_all(), and it will be canceled by broughting down.
Fixes: dd40781e3a4e ("sfc: Run event/IRQ self-test asynchronously when interface is brought up")
Fixes: e340be923012 ("sfc: add ndo_set_vf_mac() function for EF10")
Debugged-by: Huang Cun <huangcun@sangfor.com.cn>
Cc: Donglin Peng <pengdonglin@sangfor.com.cn>
Suggested-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Here we copy the data from the original buf to the new page. But we
not check that it may be overflow.
As long as the size received(including vnethdr) is greater than 3840
(PAGE_SIZE -VIRTIO_XDP_HEADROOM). Then the memcpy will overflow.
And this is completely possible, as long as the MTU is large, such
as 4096. In our test environment, this will cause crash. Since crash is
caused by the written memory, it is meaningless, so I do not include it.
Fixes: 72979a6c3590 ("virtio_net: xdp, add slowpath case for non contiguous buffers")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
This is a proposal to revert commit 914eedcb9ba0ff53c33808.
I found this when writing a simple UFFDIO_API test to be the first unit
test in this set. Two things breaks with the commit:
- UFFDIO_API check was lost and missing. According to man page, the
kernel should reject ioctl(UFFDIO_API) if uffdio_api.api != 0xaa. This
check is needed if the api version will be extended in the future, or
user app won't be able to identify which is a new kernel.
- Feature flags checks were removed, which means UFFDIO_API with a
feature that does not exist will also succeed. According to the man
page, we should (and it makes sense) to reject ioctl(UFFDIO_API) if
unknown features passed in.
Link: https://lore.kernel.org/r/20220722201513.1624158-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20230412163922.327282-2-peterx@redhat.com
Fixes: 914eedcb9ba0 ("userfaultfd: don't fail on unrecognized features")
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
KASAN report null-ptr-deref:
==================================================================
BUG: KASAN: null-ptr-deref in bdi_split_work_to_wbs+0x5c5/0x7b0
Write of size 8 at addr 0000000000000000 by task sync/943
CPU: 5 PID: 943 Comm: sync Tainted: 6.3.0-rc5-next-20230406-dirty #461
Call Trace:
<TASK>
dump_stack_lvl+0x7f/0xc0
print_report+0x2ba/0x340
kasan_report+0xc4/0x120
kasan_check_range+0x1b7/0x2e0
__kasan_check_write+0x24/0x40
bdi_split_work_to_wbs+0x5c5/0x7b0
sync_inodes_sb+0x195/0x630
sync_inodes_one_sb+0x3a/0x50
iterate_supers+0x106/0x1b0
ksys_sync+0x98/0x160
[...]
==================================================================
The race that causes the above issue is as follows:
cpu1 cpu2
-------------------------|-------------------------
inode_switch_wbs
INIT_WORK(&isw->work, inode_switch_wbs_work_fn)
queue_rcu_work(isw_wq, &isw->work)
// queue_work async
inode_switch_wbs_work_fn
wb_put_many(old_wb, nr_switched)
percpu_ref_put_many
ref->data->release(ref)
cgwb_release
queue_work(cgwb_release_wq, &wb->release_work)
// queue_work async
&wb->release_work
cgwb_release_workfn
ksys_sync
iterate_supers
sync_inodes_one_sb
sync_inodes_sb
bdi_split_work_to_wbs
kmalloc(sizeof(*work), GFP_ATOMIC)
// alloc memory failed
percpu_ref_exit
ref->data = NULL
kfree(data)
wb_get(wb)
percpu_ref_get(&wb->refcnt)
percpu_ref_get_many(ref, 1)
atomic_long_add(nr, &ref->data->count)
atomic64_add(i, v)
// trigger null-ptr-deref
bdi_split_work_to_wbs() traverses &bdi->wb_list to split work into all
wbs. If the allocation of new work fails, the on-stack fallback will be
used and the reference count of the current wb is increased afterwards.
If cgroup writeback membership switches occur before getting the reference
count and the current wb is released as old_wd, then calling wb_get() or
wb_put() will trigger the null pointer dereference above.
This issue was introduced in v4.3-rc7 (see fix tag1). Both
sync_inodes_sb() and __writeback_inodes_sb_nr() calls to
bdi_split_work_to_wbs() can trigger this issue. For scenarios called via
sync_inodes_sb(), originally commit 7fc5854f8c6e ("writeback: synchronize
sync(2) against cgroup writeback membership switches") reduced the
possibility of the issue by adding wb_switch_rwsem, but in v5.14-rc1 (see
fix tag2) removed the "inode_io_list_del_locked(inode, old_wb)" from
inode_switch_wbs_work_fn() so that wb->state contains WB_has_dirty_io,
thus old_wb is not skipped when traversing wbs in bdi_split_work_to_wbs(),
and the issue becomes easily reproducible again.
To solve this problem, percpu_ref_exit() is called under RCU protection to
avoid race between cgwb_release_workfn() and bdi_split_work_to_wbs().
Moreover, replace wb_get() with wb_tryget() in bdi_split_work_to_wbs(),
and skip the current wb if wb_tryget() fails because the wb has already
been shutdown.
Link: https://lkml.kernel.org/r/20230410130826.1492525-1-libaokun1@huawei.com
Fixes: b817525a4a80 ("writeback: bdi_writeback iteration must not skip dying ones")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Hou Tao <houtao1@huawei.com>
Cc: yangerkun <yangerkun@huawei.com>
Cc: Zhang Yi <yi.zhang@huawei.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In mas_alloc_nodes(), "node->node_count = 0" means to initialize the
node_count field of the new node, but the node may not be a new node. It
may be a node that existed before and node_count has a value, setting it
to 0 will cause a memory leak. At this time, mas->alloc->total will be
greater than the actual number of nodes in the linked list, which may
cause many other errors. For example, out-of-bounds access in
mas_pop_node(), and mas_pop_node() may return addresses that should not be
used. Fix it by initializing node_count only for new nodes.
Also, by the way, an if-else statement was removed to simplify the code.
Link: https://lkml.kernel.org/r/20230411041005.26205-1-zhangpeng.00@bytedance.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When using cull option with 'tg' flag, the fprintf is using pid instead
of tgid. It should use tgid instead.
Link: https://lkml.kernel.org/r/20230411034929.2071501-1-steve_chou@pesi.com.tw
Fixes: 9c8a0a8e599f4a ("tools/vm/page_owner_sort.c: support for user-defined culling rules")
Signed-off-by: Steve Chou <steve_chou@pesi.com.tw>
Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Link: https://lkml.kernel.org/r/d79bc6eaf65e68bd1c2a1e1510ab6291ce5926a6.1681162487.git.jtoppins@redhat.com
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Qais Yousef <qyousef@layalina.io>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
set_mempolicy_home_node() iterates over a list of VMAs and calls
mbind_range() on each VMA, which also iterates over the singular list of
the VMA passed in and potentially splits the VMA. Since the VMA iterator
is not passed through, set_mempolicy_home_node() may now point to a stale
node in the VMA tree. This can result in a UAF as reported by syzbot.
Avoid the stale maple tree node by passing the VMA iterator through to the
underlying call to split_vma().
mbind_range() is also overly complicated, since there are two calling
functions and one already handles iterating over the VMAs. Simplify
mbind_range() to only handle merging and splitting of the VMAs.
Align the new loop in do_mbind() and existing loop in
set_mempolicy_home_node() to use the reduced mbind_range() function. This
allows for a single location of the range calculation and avoids
constantly looking up the previous VMA (since this is a loop over the
VMAs).
Link: https://lore.kernel.org/linux-mm/000000000000c93feb05f87e24ad@google.com/
Fixes: 66850be55e8e ("mm/mempolicy: use vma iterator & maple state instead of vma linked list")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: syzbot+a7c1ec5b1d71ceaa5186@syzkaller.appspotmail.com
Link: https://lkml.kernel.org/r/20230410152205.2294819-1-Liam.Howlett@oracle.com
Tested-by: syzbot+a7c1ec5b1d71ceaa5186@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
split_huge_page_to_list() WARNs when called for huge zero pages, which
sounds to me too harsh because it does not imply a kernel bug, but just
notifies the event to admins. On the other hand, this is considered as
critical by syzkaller and makes its testing less efficient, which seems to
me harmful.
So replace the VM_WARN_ON_ONCE_FOLIO with pr_warn_ratelimited.
Link: https://lkml.kernel.org/r/20230406082004.2185420-1-naoya.horiguchi@linux.dev
Fixes: 478d134e9506 ("mm/huge_memory: do not overkill when splitting huge_zero_page")
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reported-by: syzbot+07a218429c8d19b1fb25@syzkaller.appspotmail.com
Link: https://lore.kernel.org/lkml/000000000000a6f34a05e6efcd01@google.com/
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Xu Yu <xuyu@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When the loop over the VMA is terminated early due to an error, the return
code could be overwritten with ENOMEM. Fix the return code by only
setting the error on early loop termination when the error is not set.
User-visible effects include: attempts to run mprotect() against a
special mapping or with a poorly-aligned hugetlb address should return
-EINVAL, but they presently return -ENOMEM. In other cases an -EACCESS
should be returned.
Link: https://lkml.kernel.org/r/20230406193050.1363476-1-Liam.Howlett@oracle.com
Fixes: 2286a6914c77 ("mm: change mprotect_fixup to vma iterator")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Khugepaged collapse an anonymous thp in two rounds of scans. The 2nd
round done in __collapse_huge_page_isolate() after
hpage_collapse_scan_pmd(), during which all the locks will be released
temporarily. It means the pgtable can change during this phase before 2nd
round starts.
It's logically possible some ptes got wr-protected during this phase, and
we can errornously collapse a thp without noticing some ptes are
wr-protected by userfault. e1e267c7928f wanted to avoid it but it only
did that for the 1st phase, not the 2nd phase.
Since __collapse_huge_page_isolate() happens after a round of small page
swapins, we don't need to worry on any !present ptes - if it existed
khugepaged will already bail out. So we only need to check present ptes
with uffd-wp bit set there.
This is something I found only but never had a reproducer, I thought it
was one caused a bug in Muhammad's recent pagemap new ioctl work, but it
turns out it's not the cause of that but an userspace bug. However this
seems to still be a real bug even with a very small race window, still
worth to have it fixed and copy stable.
Link: https://lkml.kernel.org/r/20230405155120.3608140-1-peterx@redhat.com
Fixes: e1e267c7928f ("khugepaged: skip collapse if uffd-wp detected")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Looks like what we fixed for hugetlb in commit 44f86392bdd1 ("mm/hugetlb:
fix uffd-wp handling for migration entries in
hugetlb_change_protection()") similarly applies to THP.
Setting/clearing uffd-wp on THP migration entries is not implemented
properly. Further, while removing migration PMDs considers the uffd-wp
bit, inserting migration PMDs does not consider the uffd-wp bit.
We have to set/clear independently of the migration entry type in
change_huge_pmd() and properly copy the uffd-wp bit in
set_pmd_migration_entry().
Verified using a simple reproducer that triggers migration of a THP, that
the set_pmd_migration_entry() no longer loses the uffd-wp bit.
Link: https://lkml.kernel.org/r/20230405160236.587705-2-david@redhat.com
Fixes: f45ec5ff16a7 ("userfaultfd: wp: support swap and page migration")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The ->percpu_pvec_drained was originally introduced by commit d9ed0d08b6c6
("mm: only drain per-cpu pagevecs once per pagevec usage") to drain
per-cpu pagevecs only once per pagevec usage. But after converting the
swap code to be more folio-based, the commit c2bc16817aa0 ("mm/swap: add
folio_batch_move_lru()") breaks this logic, which would cause
->percpu_pvec_drained to be reset to false, that means per-cpu pagevecs
will be drained multiple times per pagevec usage.
In theory, there should be no functional changes when converting code to
be more folio-based. We should call folio_batch_reinit() in
folio_batch_move_lru() instead of folio_batch_init(). And to verify that
we still need ->percpu_pvec_drained, I ran mmtests/sparsetruncate-tiny and
got the following data:
baseline with
baseline/ patch/
Min Time 326.00 ( 0.00%) 328.00 ( -0.61%)
1st-qrtle Time 334.00 ( 0.00%) 336.00 ( -0.60%)
2nd-qrtle Time 338.00 ( 0.00%) 341.00 ( -0.89%)
3rd-qrtle Time 343.00 ( 0.00%) 347.00 ( -1.17%)
Max-1 Time 326.00 ( 0.00%) 328.00 ( -0.61%)
Max-5 Time 327.00 ( 0.00%) 330.00 ( -0.92%)
Max-10 Time 328.00 ( 0.00%) 331.00 ( -0.91%)
Max-90 Time 350.00 ( 0.00%) 357.00 ( -2.00%)
Max-95 Time 395.00 ( 0.00%) 390.00 ( 1.27%)
Max-99 Time 508.00 ( 0.00%) 434.00 ( 14.57%)
Max Time 547.00 ( 0.00%) 476.00 ( 12.98%)
Amean Time 344.61 ( 0.00%) 345.56 * -0.28%*
Stddev Time 30.34 ( 0.00%) 19.51 ( 35.69%)
CoeffVar Time 8.81 ( 0.00%) 5.65 ( 35.87%)
BAmean-99 Time 342.38 ( 0.00%) 344.27 ( -0.55%)
BAmean-95 Time 338.58 ( 0.00%) 341.87 ( -0.97%)
BAmean-90 Time 336.89 ( 0.00%) 340.26 ( -1.00%)
BAmean-75 Time 335.18 ( 0.00%) 338.40 ( -0.96%)
BAmean-50 Time 332.54 ( 0.00%) 335.42 ( -0.87%)
BAmean-25 Time 329.30 ( 0.00%) 332.00 ( -0.82%)
From the above it can be seen that we get similar data to when
->percpu_pvec_drained was introduced, so we still need it. Let's call
folio_batch_reinit() in folio_batch_move_lru() to restore the original
logic.
Link: https://lkml.kernel.org/r/20230405161854.6931-1-zhengqi.arch@bytedance.com
Fixes: c2bc16817aa0 ("mm/swap: add folio_batch_move_lru()")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Do not pull tasks to the local scheduling group if its average load
is higher than the average system load
* tag 'sched_urgent_for_v6.3_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix imbalance overflow
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
- Drop __init annotation from two rtc functions which get called after
boot is done, in order to prevent a crash
* tag 'x86_urgent_for_v6.3_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/rtc: Remove __init for runtime functions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- A fix for NUMA distance handling in the pseries SCM (pmem) driver.
Thanks to Aneesh Kumar K.V.
* tag 'powerpc-6.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/papr_scm: Update the NUMA distance table for the target node
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Drop debug info from purgatory objects again
- Document that kernel.org provides prebuilt LLVM toolchains
- Give up handling untracked files for source package builds
- Avoid creating corrupted cpio when KBUILD_BUILD_TIMESTAMP is given
with a pre-epoch data.
- Change panic_show_mem() to a macro to handle variable-length argument
- Compress tarballs on-the-fly again
* tag 'kbuild-fixes-v6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: do not create intermediate *.tar for tar packages
kbuild: do not create intermediate *.tar for source tarballs
kbuild: merge cmd_archive_linux and cmd_archive_perf
init/initramfs: Fix argument forwarding to panic() in panic_show_mem()
initramfs: Check negative timestamp to prevent broken cpio archive
kbuild: give up untracked files for source package builds
Documentation/llvm: Add a note about prebuilt kernel.org toolchains
purgatory: fix disabling debug info
|
|
Pull ksmbd server fix from Steve French:
"smb311 server preauth integrity negotiate context parsing fix (check
for out of bounds access)"
* tag '6.3-rc6-ksmbd-server-fix' of git://git.samba.org/ksmbd:
ksmbd: avoid out of bounds access in decode_preauth_ctxt()
|
|
Commit 05e96e96a315 ("kbuild: use git-archive for source package
creation") split the compression as a separate step to factor out
the common build rules.
With the previous commit, we got back to the situation where source
tarballs are compressed on-the-fly.
There is no reason to keep the separate compression rules.
Generate the comressed tar packages directly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
|
|
Since commit 05e96e96a315 ("kbuild: use git-archive for source package
creation"), a source tarball is created in two steps; create *.tar file
then compress it. I split the compression as a separate rule because I
just thought 'git archive' supported only gzip.
For other compression algorithms, I could pipe the two commands:
$ git archive HEAD | xz > linux.tar.xz
I read git-archive(1) carefully, and I realized GIT had provided a
more elegant way:
$ git -c tar.tar.xz.command=xz archive -o linux.tar.xz HEAD
This commit uses 'tar.tar.*.command' configuration to specify the
compression backend so we can compress a source tarball on-the-fly.
GIT commit 767cf4579f0e ("archive: implement configurable tar filters")
is more than a decade old, so it should be available on almost all build
environments.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
|
