summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-10-10arm64: dts: imx8qm-ss-img: Fix jpegenc compatible entryFabio Estevam
The first compatible entry for the jpegenc should be 'nxp,imx8qm-jpgenc'. Change it accordingly to fix the following schema warning: imx8qm-apalis-eval.dtb: jpegenc@58450000: compatible: 'oneOf' conditional failed, one must be fixed: 'nxp,imx8qm-jpgdec' is not one of ['nxp,imx8qxp-jpgdec', 'nxp,imx8qxp-jpgenc'] 'nxp,imx8qm-jpgenc' was expected 'nxp,imx8qxp-jpgdec' was expected Fixes: 5bb279171afc ("arm64: dts: imx8: Add jpeg encoder/decoder nodes") Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: imx93: Fix the dmas entries orderFabio Estevam
Per fsl-lpuart.yaml, the dmas and dma-names entries should be 'rx' followed by 'tx'. Change the order to fix the following schema warning: imx93-11x11-evk.dtb: serial@44380000: dma-names:0: 'rx' was expected from schema $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml# imx93-11x11-evk.dtb: serial@44380000: dma-names:1: 'tx' was expected from schema $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: imx8mm-venice-gw790: Pass GSC address/size-cellsFabio Estevam
Per gateworks-gsc.yaml, #address-cells and #size-cells are mandatory properties. Pass them to fix the following schema warning: imx8mm-venice-gw7903.dtb: gsc@20: '#address-cells' is a required property from schema $id: http://devicetree.org/schemas/mfd/gateworks-gsc.yaml# imx8mm-venice-gw7903.dtb: gsc@20: '#size-cells' is a required property from schema $id: http://devicetree.org/schemas/mfd/gateworks-gsc.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: imx8dxl: Pass fsl,imx8dxl-sc-wdtFabio Estevam
Pass 'fsl,imx8dxl-sc-wdt' to fix the following schema warning: system-controller: watchdog:compatible:0: 'fsl,imx8qxp-sc-wdt' was expected from schema $id: http://devicetree.org/schemas/firmware/fsl,scu.yaml# system-controller: watchdog:compatible: ['fsl,imx-sc-wdt'] is too short from schema $id: http://devicetree.org/schemas/firmware/fsl,scu.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: imx8dxl: Pass fsl,imx8dxl-sc-thermalFabio Estevam
Pass 'fsl,imx8dxl-sc-thermal' to fix the following schema warning: system-controller: thermal-sensor:compatible:0: 'fsl,imx8qxp-sc-thermal' was expected from schema $id: http://devicetree.org/schemas/firmware/fsl,scu.yaml# system-controller: thermal-sensor:compatible: ['fsl,imx-sc-thermal'] is too short from schema $id: http://devicetree.org/schemas/firmware/fsl,scu.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: imx8dxl: Remove wakeup-irqFabio Estevam
wakeup-irq is not documented, and not used anywhere. Remove it. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: imx8dxl: Pass fsl,imx8dl-scu-pdFabio Estevam
Pass 'fsl,imx8dl-scu-pd' to fix the following schema warning: system-controller: power-controller:compatible:0: 'fsl,scu-pd' is not one of ['fsl,imx8qm-scu-pd', 'fsl,imx8qxp-scu-pd'] from schema $id: http://devicetree.org/schemas/firmware/fsl,scu.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: imx8qm-mek: enable 8qm lpuart2 and lpuart3Frank Li
Enable uart2 and uart3 for imx8qm-mek board. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: imx8qxp-mek: enable 8qxp lpuart2 and lpuart3Frank Li
Enable uart2 and uart3 for imx8qxp-mek board. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: imx8: update lpuart[0..3] irq numberFrank Li
Original irq number combined UART irq and DMA irq. These doesn't match uart driver and dma engine's expection. Update to the irq numbers, which just uart can trigger. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: imx8qm: Update edma channel for uart[0..3]Frank Li
imx8qm have difference dma channel number for uart[0..3]. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: imx8: add edma for uart[0..3]Frank Li
Add dma support uart[0..3]. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: imx8: add edma[0..3]Frank Li
edma<n> is missed, add them. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: ls208xa: use a pseudo-bus to constrain usb dma sizeLaurentiu Tudor
Wrap the usb controllers in an intermediate simple-bus and use it to constrain the dma address size of these usb controllers to the 40b that they generate toward the interconnect. This is required because the SoC uses 48b address sizes and this mismatch would lead to smmu context faults [1] because the usb generates 40b addresses while the smmu page tables are populated with 48b wide addresses. [1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002000010 xhci-hcd xhci-hcd.0.auto: irq 108, io mem 0x03100000 xhci-hcd xhci-hcd.0.auto: xHCI Host Controller xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0xffffffb000, fsynr=0x0, cbfrsynra=0xc01, cb=3 Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: freescale: add phyGATE-Tauri i.MX 8M Mini SupportYannic Moog
phyGATE-Tauri uses a phyCORE-i.MX8MM SoM. Add device tree for the board. Signed-off-by: Yannic Moog <y.moog@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10Merge tag 'imx-fixes-6.6' into imx/dt64Shawn Guo
i.MX fixes for 6.6: - A couple of i.MX8MP device tree changes from Adam Ford to fix clock configuration regressions caused by 16c984524862 ("arm64: dts: imx8mp: don't initialize audio clocks from CCM node"). - Fix pmic-irq-hog GPIO line in imx93-tqma9352 device tree. - Fix a mmemory leak with error handling path of imx_dsp_setup_channels() in imx-dsp driver. - Fix HDMI node in imx8mm-evk device tree. - Add missing clock enable functionality for imx8mm_soc_uid() function in soc-imx8m driver. - Add missing imx8mm-prt8mm.dtb build target.
2023-09-25arm64: dts: imx93: Add the TMU interruptFabio Estevam
The Thermal Monitoring Unit (TMU) interrupt is number 83. Describe it in the devicetree to fix the following schema warning: imx93-11x11-evk.dtb: tmu@44482000: 'oneOf' conditional failed, one must be fixed: 'interrupts' is a required property 'interrupts-extended' is a required property from schema $id: http://devicetree.org/schemas/thermal/qoriq-thermal.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8dxl-ss-adma: Fix i2c compatible entriesFabio Estevam
Per i2c-imx-lpi2c.yaml, the imx8dxl lpi2c compatible should be: compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c"; Change it accordingly to fix the following schema warning: imx8dxl-evk.dtb: i2c@5a800000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx8dxl-lpi2c', 'fsl,imx8qxp-lpi2c', 'fsl,imx7ulp-lpi2c'] is too long 'fsl,imx8dxl-lpi2c' is not one of ['fsl,imx7ulp-lpi2c'] 'fsl,imx7ulp-lpi2c' was expected from schema $id: http://devicetree.org/schemas/i2c/i2c-imx-lpi2c.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8x-colibri-iris-v2: Fix pinctrl node namesFabio Estevam
Per fsl,scu-pinctrl.yaml, the pinctrl node names should end with 'grp'. Change them to fix the following schema warning: imx8qxp-colibri-iris-v2.dtb: pinctrl: 'enable_3v3_vmmc', 'lcd-lvds' do not match any of the regexes: 'grp$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/pinctrl/fsl,scu-pinctrl.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8dxl-ss-conn: Complete the FEC compatiblesFabio Estevam
Use the full compatible list for the imx8dl FEC as per fsl,fec.yaml. This fixes the following schema warning: imx8dxl-evk.dtb: ethernet@5b040000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx8qm-fec'] is too short 'fsl,imx8qm-fec' is not one of ['fsl,imx25-fec', 'fsl,imx27-fec', 'fsl,imx28-fec', 'fsl,imx6q-fec', 'fsl,mvf600-fec', 'fsl,s32v234-fec'] 'fsl,imx8qm-fec' is not one of ['fsl,imx53-fec', 'fsl,imx6sl-fec'] 'fsl,imx8qm-fec' is not one of ['fsl,imx35-fec', 'fsl,imx51-fec'] 'fsl,imx8qm-fec' is not one of ['fsl,imx6ul-fec', 'fsl,imx6sx-fec'] 'fsl,imx8qm-fec' is not one of ['fsl,imx7d-fec'] 'fsl,imx8mq-fec' was expected 'fsl,imx8qm-fec' is not one of ['fsl,imx8mm-fec', 'fsl,imx8mn-fec', 'fsl,imx8mp-fec', 'fsl,imx93-fec'] 'fsl,imx8qm-fec' is not one of ['fsl,imx8dxl-fec', 'fsl,imx8qxp-fec'] 'fsl,imx8qm-fec' is not one of ['fsl,imx8ulp-fec'] from schema $id: http://devicetree.org/schemas/net/fsl,fec.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8m: Remove 'nand-on-flash-bbt' from nand controllerFabio Estevam
The 'nand-on-flash-bbt' property is a property for the NAND device, not for the GPMI nand controller. Remove it to fix the following schema warnings: imx8mm-ddr4-evk.dtb: nand-controller@33002000: Unevaluated properties are not allowed ('nand-on-flash-bbt' was unexpected) from schema $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml# imx8mn-bsh-smm-s2.dtb: nand-controller@33002000: Unevaluated properties are not allowed ('nand-on-flash-bbt' was unexpected) from schema $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mp-debix-som-a-bmb: Fix EEPROM #size-cellsFabio Estevam
The mac-address is passed as a subnode of the eeprom and its 'reg' property describe a range of addresses in the eeprom. Therefore, #size-cells should be set to 1 instead of 0. This fixes the following schema warnings: imx8mp-debix-som-a-bmb-08.dtb: eeprom@52: #size-cells:0:0: 1 was expected from schema $id: http://devicetree.org/schemas/eeprom/at24.yaml# imx8mp-debix-som-a-bmb-08.dtb: eeprom@52: mac-address@0:reg: [[0], [12]] is too long from schema $id: http://devicetree.org/schemas/eeprom/at24.yaml# imx8mp-debix-som-a-bmb-08.dtb: eeprom@52: mac-address@c:reg: [[12], [12]] is too long from schema $id: http://devicetree.org/schemas/eeprom/at24.yaml# imx8mp-debix-som-a-bmb-08.dtb: eeprom@52: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'mac-address@0', 'mac-address@c' were unexpected) from schema $id: http://devicetree.org/schemas/eeprom/at24.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8-ss-lsio: Add PWM interruptsFabio Estevam
The PWM interrupt is mandatory per imx-pwm.yaml. Add them. This also fixes the followig schema warning: imx8qm-apalis-v1.1-ixora-v1.2.dtb: pwm@5d000000: 'oneOf' conditional failed, one must be fixed: 'interrupts' is a required property 'interrupts-extended' is a required property from schema $id: http://devicetree.org/schemas/pwm/imx-pwm.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx: Add imx8mm-prt8mm.dtb to buildRob Herring
imx8mm-prt8mm.dts was not getting built. Add it to the build. Fixes: 58497d7a13ed ("arm64: dts: imx: add Protonic PRT8MM board") Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mq-librem5: Remove invalid charger propertiesFabio Estevam
Per bq25890.yaml, 'phys', 'ti,use-vinmin-threshold', 'ti,vinmin-threshold' are not valid properties. Remove them to fix the following schema warning: imx8mq-librem5-r2.dtb: charger@6a: Unevaluated properties are not allowed ('phys', 'ti,use-vinmin-threshold', 'ti,vinmin-threshold' were unexpected) from schema $id: http://devicetree.org/schemas/power/supply/bq25890.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8-apalis-v1.1: Remove invalid GPIO propertiesFabio Estevam
Per fsl-imx-gpio.yaml, 'pad-wakeup' and 'pad-wakeup-num' are not valid properties/ Remove them to fix the following schema warning: imx8qm-apalis-ixora-v1.1.dtb: gpio@5d0a0000: 'pad-wakeup', 'pad-wakeup-num' do not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/fsl-imx-gpio.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8-apalis-ixora: Remove invalid ngpios propertyFabio Estevam
Per fsl-imx-gpio.yaml, 'ngpios' is not a valid property. Remove it to fix the following schema warning: imx8qm-apalis-v1.1-ixora-v1.2.dtb: gpio@5d0d0000: 'ngpios' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/fsl-imx-gpio.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mq-zii-ultra: Fix mdio node nameFabio Estevam
Per mdio-gpio.yaml, the node name should be 'mdio'. Change it accordingly to fix the following schema warning: imx8mq-zii-ultra-zest.dtb: bitbang-mdio: $nodename:0: 'bitbang-mdio' does not match '^mdio(@.*)?' from schema $id: http://devicetree.org/schemas/net/mdio-gpio.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mq-nitrogen: Fix PCA9546 I2C subnodesFabio Estevam
Per i2c-mux-pca954x.yaml, the PCA9546 I2C subnodes should be in the 'i2c@' format. Change it accordingly to fix the following schema warning: imx8mm-nitrogen-r2.dtb: i2c-mux@70: Unevaluated properties are not allowed ('i2c3@0' was unexpected) Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mm/p-venice: Remove lis2de12 interrupt-namesFabio Estevam
According to st,st-sensors.yaml, the 'interrupt-names' property is not a valid one. Remove it to fix the following schema warnings: imx8mp-venice-gw73xx-2x.dtb: accelerometer@19: 'interrupt-names' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/iio/st,st-sensors.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8ulp: Fix the SPI clock-names orderFabio Estevam
spi-nxp-fspi.yaml expects the clock-names entries to be in the following order: "fspi_en", "fspi". Change it accordingly to fix the following schema warnings: imx8ulp-evk.dtb: spi@29810000: clock-names:0: 'fspi_en' was expected from schema $id: http://devicetree.org/schemas/spi/spi-nxp-fspi.yaml# imx8ulp-evk.dtb: spi@29810000: clock-names:1: 'fspi' was expected from schema $id: http://devicetree.org/schemas/spi/spi-nxp-fspi.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8dxl-evk: Remove invalid spi propertyFabio Estevam
nxp,fspi-dll-slvdly is not documented nor used anywhere. Drop this invalid property. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8dxl-ss-conn: Move conn_enet0_root_clk outside of socFabio Estevam
The conn_enet0_root_clk node does not have any register associated with it, so it should be moved outside of soc to fix schema warning from simple-bus.yaml. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8-ss-audio: Move audio_ipg_clk outside of socFabio Estevam
The audio_ipg_clk node does not have any register associated with it, so it should be moved outside of soc to fix schema warning from simple-bus.yaml. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8-ss-img: Move img_ipg_clk outside of socFabio Estevam
The img_ipg_clk node does not have any register associated with it, so it should be moved outside of soc to fix schema warning from simple-bus.yaml. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8-ss-conn: Move conn clocks outside of socFabio Estevam
The conn clock nodes do not have any register associated with it, so they should be moved outside of soc to fix schema warning from simple-bus.yaml. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8-ss-dma: Move dma_ipg_clk outside of socFabio Estevam
The dma_ipg_clk node does not have any register associated with it, so it should be moved outside of soc to fix schema warning from simple-bus.yaml. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8-ss-lsio: Move lsio_bus_clk outside of socFabio Estevam
The lsio_bus_clk node does not have any register associated with it, so it should be moved outside of soc to fix schema warning from simple-bus.yaml. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8-ss-lsio: Remove unused clockFabio Estevam
The lsio_mem_clk is not used anywhere, so simply remove it. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mq: Move funnel outside from socFabio Estevam
The 'funnel' node does not contain a register range, so it should be placed outside of the soc node to fix schema warnings from simple-bus.yaml. Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mp: Move funnel outside from socFabio Estevam
The 'funnel' node does not contain a register range, so it should be placed outside of the soc node to fix schema warnings from simple-bus.yaml. Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mp-phyboard-pollux: Add support for RS232/RS485Teresa Remmet
Add UART2 for RS232/RS485 support. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> (Updated the node by not setting the reserved bits(BIT 0 and BIT 3) and enabled internal pullup for RX and TX.) Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de> Signed-off-by: Cem Tenruh <c.tenruh@phytec.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mp-phyboard-pollux: Add gpio-line-namesCem Tenruh
Add gpio-line-names to the imx8mp-phyboard-pollux devicetree. Signed-off-by: Cem Tenruh <c.tenruh@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mp-phycore-som: Add gpio-line-namesCem Tenruh
Add gpio-line-names to the imx8mp-phycore-som devicetree. Signed-off-by: Cem Tenruh <c.tenruh@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mp-phyboard-pollux: Enable USB supportTeresa Remmet
Enable USB support for both interfaces in host mode. USB1 is directly conncted to a type-A connector and USB2 is attached to a 4-Port USB Hub. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Cem Tenruh <c.tenruh@phytec.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mp-phyboard-pollux: Add flexcan supportTeresa Remmet
Add flexcan1 and flexcan2 support for CAN FD on phyBOARD-Pollux. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Cem Tenruh <c.tenruh@phytec.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mp: Simplify USB C on DH i.MX8M Plus DHCOM PDK3Marek Vasut
Remove the connector as well as all the links and only connect the PTN5150 with xHCI controller. This is sufficient to implement the role switching. Furthermore, this makes resume work without hanging. Without this patch, the platform would hang on resume of 'connector'. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mp: Add micfil nodeAdam Ford
The i.MX8MP has a micfil controller which is used for interfacing with a pulse density microphone. Add the node and mark it as disabled by default. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mp: Add easrc nodeAdam Ford
The i.MX8MP has an asynchronous sample rate converter which seems to be the same as what is available on the i.MX8M Nano. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: freescale: imx8m*-venice: remove label = "cpu" from DSA dt-bindingTim Harvey
This is not used by the DSA dt-binding, so remove it from the devicetrees. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-15 11:37:59 +0000