summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-07-04drm/msm/hdmi: drop empty 'none' regulator listsDmitry Baryshkov
Several platform configs use empty 'none' regulator arrays. They are not necessary, as the code will use corresponding _cnt field and skip the array completely. Drop them now. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488861/ Link: https://lore.kernel.org/r/20220609122350.3157529-9-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: enable core-vcc/core-vdda-supply for 8996 platformDmitry Baryshkov
DB820c makes use of core-vcc-supply and core-vdda-supply, however the driver code doesn't support these regulators. Enable them for HDMI on 8996 platform. Fixes: 0afbe59edd3f ("drm/msm/hdmi: Add basic HDMI support for msm8996") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/488857/ Link: https://lore.kernel.org/r/20220609122350.3157529-8-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: drop unused GPIO supportDmitry Baryshkov
The HDMI driver has code to configure extra GPIOs, which predates pinctrl support. Nowadays all platforms should use pinctrl instead. Neither of upstreamed Qualcomm platforms uses these properties, so it's safe to drop them. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/488858/ Link: https://lore.kernel.org/r/20220609122350.3157529-7-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: drop the hdmi-mux supportDmitry Baryshkov
With the last (and only) in-kernel user of hdmi-mux regulator, drop it from the HDMI driver. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488855/ Link: https://lore.kernel.org/r/20220609122350.3157529-6-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04dt-bindings: display/msm: hdmi: mark hdmi-mux-supply as deprecatedDmitry Baryshkov
hdmi-mux-supply is not used by the SoC's HDMI block, it is thought to power up the external logic. Thus it should not be a part of HDMI bindings, but it should be declared at some other device in the DT (like HDMI mux, bridge, etc). Mark it as deprecated. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488870/ Link: https://lore.kernel.org/r/20220609122350.3157529-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04dt-bindings: display/msm: hdmi: mark old GPIO properties as deprecatedDmitry Baryshkov
Mark obsolete GPIO properties as deprecated. They are not used by existing device trees. While we are at it, also drop them from the schema example. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488852/ Link: https://lore.kernel.org/r/20220609122350.3157529-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04dt-bindings: display/msm: hdmi: split and convert to yamlDmitry Baryshkov
Convert Qualcomm HDMI binding into HDMI TX and PHY yaml bindings. Changes to schema: HDMI: - fixed reg-names numbering to match 0..3 instead 0,1,3,4 - dropped qcom,tx-ddc-* from example, they were not documented - make phy-names deprecated, drop it from the examples PHY: - moved into phy/ directory - split into QMP and non-QMP PHY schemas Co-developed-by: David Heidelberg <david@ixit.cz> Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488850/ Link: https://lore.kernel.org/r/20220609122350.3157529-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dp: use ARRAY_SIZE for calculating num_descsDmitry Baryshkov
If for some reason the msm_dp_config::descs array starts from non-zero index or contains the hole, setting the msm_dp_config::num_descs might be not that obvious and error-prone. Use ARRAY_SIZE to set this field rather than encoding the value manually. Reported-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/491399/ Link: https://lore.kernel.org/r/20220627165413.657142-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dsi: Use single function for resetVladimir Lypak
There is currently two function for performing reset: dsi_sw_reset and dsi_sw_reset_restore. Only difference between those is that latter one assumes that DSI controller is enabled. In contrary former one assumes that controller is disabled and executed during power-on. However this assumtion is not true mobile devices which have boot splash set up by boot-loader. This patch removes dsi_sw_reset_restore and makes dsi_sw_reset disable DSI controller during reset sequence if it's enabled. Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489152/ Link: https://lore.kernel.org/r/20220610220259.220622-1-luca@z3ntu.xyz [DB: fixed the typo in the commit message] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: fill the pwr_regs bulk regulatorsDmitry Baryshkov
Conversion to use bulk regulator API omitted filling the pwr_regs with proper regulator IDs. This was left unnoticed, since none of my testing platforms has used the pwr_regs. Fix this by propagating regulator ids properly. Fixes: 31b3b1f5e352 ("drm/msm/hdmi: use bulk regulator API") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/488847/ Link: https://lore.kernel.org/r/20220609113148.3149194-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dp: Remove encoder pointer from struct msm_dpStephen Boyd
We don't need to stash the encoder here. Instead we can simply pass it around as an argument. Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/491187/ Link: https://lore.kernel.org/r/20220625002811.3225344-1-swboyd@chromium.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dp: make dp_bridge_mode_valid() more preciseDmitry Baryshkov
Make dp_connector_mode_valid() return precise MODE_CLOCK_HIGH rather than generic MODE_BAD in case the mode clock is higher than DP_MAX_PIXEL_CLK_KHZ (675 MHz). Reviewed-by: Kuogee Hsieh<quic_khsieh@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489554/ Link: https://lore.kernel.org/r/20220615115920.6768-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04dt-bindings: msm: update maintainers list with proper idKuogee Hsieh
Use quic id instead of codeaurora id in maintainers list for display devicetree bindings. Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488296/ Link: https://lore.kernel.org/r/1654286979-11072-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: simplify and unify dpu_encoder_get_intf and dpu_encoder_get_wbDmitry Baryshkov
Remove extra nestting level from the dpu_encoder_get_intf(), replacing it with the explicit return in case the INTF_WB was passed to the function. While we are at it, also change dpu_encoder_get_wb() to also use explicit return rather than the goto. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/491189/ Link: https://lore.kernel.org/r/20220625003028.383259-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04dt-bindings: msm/dp: List supplies in the bindingsDouglas Anderson
We're supposed to list the supplies in the dt bindings but there are none in the DP controller bindings. Looking at the Linux driver and existing device trees, we can see that two supplies are expected: - vdda-0p9-supply - vdda-1p2-supply Let's list them both in the bindings. Note that the datasheet for sc7280 doesn't describe these supplies very verbosely. For the 0p9 supply, for instance, it says "Power for eDP 0.9 V circuits". This this is obvious from the property name, we don't bother cluttering the bindings with a description. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/483373/ Link: https://lore.kernel.org/r/20220425140619.1.Ibfde5a26a7182c4b478d570c23d2649823ac2cce@changeid Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: Add interface support for CRC debugfsJessica Zhang
Add support for writing CRC values for the interface block to the debugfs by calling the necessary MISR setup/collect methods. Changes since V1: - Set values_cnt to only include phys with backing hw_intf - Loop over all drm_encs connected to crtc Changes since V2: - Remove vblank.h inclusion - Change `pos + i` to `pos + entries` - Initialize values_cnt to 0 for encoder - Change DPU_CRTC_CRC_SOURCE_INTF to DPU_CRTC_CRC_SOURCE_ENCODER (and "intf" to "enc") - Change dpu_encoder_get_num_phys to dpu_encoder_get_num_hw_intfs - Add checks for setup_misr and collect_misr in dpu_encoder_get_num_hw_intfs Changes since V3: - Remove extra whitespace - Change "enc" to "encoder" - Move crcs array to dpu_crtc_get_encoder_crc - Rename dpu_encoder_get_num_hw_intfs to dpu_encoder_get_crc_values_cnt Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/490736/ Link: https://lore.kernel.org/r/20220622171835.7558-5-quic_jesszhan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dp: rewrite dss_module_power to use bulk clock functionsDmitry Baryshkov
In order to simplify DP code, drop hand-coded loops over clock arrays, replacing them with clk_bulk_* functions. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/474717/ Link: https://lore.kernel.org/r/20220217055529.499829-6-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: Add MISR register support for interfaceJessica Zhang
Add support for setting MISR registers within the interface Changes since V1: - Replaced dpu_hw_intf collect_misr and setup_misr implementations with calls to dpu_hw_utils helper methods Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/490730/ Link: https://lore.kernel.org/r/20220622171835.7558-4-quic_jesszhan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dp: inline dp_power_clk_set_rate()Dmitry Baryshkov
Inline the dp_power_clk_set_rate() function, replacing it with the call to msm_dss_enable_clk(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/474719/ Link: https://lore.kernel.org/r/20220217055529.499829-5-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: Move MISR methods to dpu_hw_utilJessica Zhang
Move layer mixer specific MISR methods to generalized helper methods. This will make it easier to add CRC support for other blocks in the future. Changes since V2: - Reordered parameters so that offsets are after hw_blk_reg_map - Fixed mismatched whitespace in bitmask definitions Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/490732/ Link: https://lore.kernel.org/r/20220622171835.7558-3-quic_jesszhan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dp: set stream_pixel rate directlyDmitry Baryshkov
The only clock for which we set the rate is the "stream_pixel". Rather than storing the rate and then setting it by looping over all the clocks, set the clock rate directly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/474714/ Link: https://lore.kernel.org/r/20220217055529.499829-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dp: "inline" dp_ctrl_set_clock_rate("ctrl_link")Dmitry Baryshkov
"ctrl_link" is the clock from DP_CTRL_PM module. The result of setting the rate for it would be a call to dev_pm_opp_set_rate(). Instead of saving the rate inside struct dss_module_power, call the devm_pm_opp_set_rate() directly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/474712/ Link: https://lore.kernel.org/r/20220217055529.499829-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: Move LM CRC code into separate methodJessica Zhang
Move layer mixer-specific section of dpu_crtc_get_crc() into a separate helper method. This way, we can make it easier to get CRCs from other HW blocks by adding other get_crc helper methods. Changes since V1: - Move common bitmasks to dpu_hw_util.h - Move common CRC methods to dpu_hw_util.c - Update copyrights - Change crcs array to a dynamically allocated array and added it as a member of crtc_state Changes since V2: - Put changes for hw_util into a separate commit - Revert crcs array to a static array - Add else case for set_crc_source to return EINVAL if no valid source is selected - Add DPU_CRTC_MAX_CRC_ENTRIES macro Changes since V3: - Move crcs array into dpu_crtc_get_lm_crc - Remove comment about crcs array in dpu_crtc_state struct - Revert `lm` rename - Remove DPU_CRTC_MAX_CRC_ENTRIES macro - Return EINVAL in dpu_crtc_get_crc if no valid CRC source is set Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/490735/ Link: https://lore.kernel.org/r/20220622171835.7558-2-quic_jesszhan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: remove hard-coded linewidth limit for writebackAbhinav Kumar
Remove the hard-coded limit for writeback and lets start using the one from catalog instead. changes in v3: - correct the Fixes tag Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback") Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489888/ Link: https://lore.kernel.org/r/1655406084-17407-3-git-send-email-quic_abhinavk@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: fix maxlinewidth for writeback blockAbhinav Kumar
Writeback block for sm8250 was using the default maxlinewidth of 2048. But this is not right as it supports upto 4096. This should have no effect on most resolutions as we are still limiting upto maxlinewidth of SSPP for adding the modes. Fix the maxlinewidth for writeback block on sm8250. changes in v3: - correct the Fixes tag Fixes: 53324b99bd7b ("drm/msm/dpu: add writeback blocks to the sm8250 DPU catalog") Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489887/ Link: https://lore.kernel.org/r/1655406084-17407-2-git-send-email-quic_abhinavk@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: move intf and wb assignment to dpu_encoder_setup_display()Abhinav Kumar
intf and wb resources are not dependent on the rm global state so need not be allocated during dpu_encoder_virt_atomic_mode_set(). Move the allocation of intf and wb resources to dpu_encoder_setup_display() so that we can utilize the hw caps even during atomic_check() phase. Since dpu_encoder_setup_display() already has protection against setting invalid intf_idx and wb_idx, these checks can now be dropped as well. changes in v2: - add phys->hw_intf and phys->hw_wb checks back changes in v3: - correct the Fixes tag Fixes: e02a559a720f ("drm/msm/dpu: make changes to dpu_encoder to support virtual encoder") Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489885/ Link: https://lore.kernel.org/r/1655406084-17407-1-git-send-email-quic_abhinavk@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: drop enum msm_display_capsDmitry Baryshkov
After the commit c46f0d69039c ("drm/msm: remove unused hotplug and edid macros from msm_drv.h") the msm_display_caps enum contains two bits describing whether the encoder should work in video or command mode. Drop the enum and replace capabilities field in struct msm_display_info with boolean is_cmd_mode field. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/485454/ Link: https://lore.kernel.org/r/20220507115942.1705872-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: dont_use IS_ERR_OR_NULL for encoder phys backendsDmitry Baryshkov
The functions dpu_encoder_phys_foo_init() can not return NULL. Replace corresponding IS_ERR_OR_NULL() checks with just IS_ERR(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/485452/ Link: https://lore.kernel.org/r/20220507115942.1705872-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: make dpu hardware catalog static constDmitry Baryshkov
Replace superfluous cfg_init functions, which just assign a static config to the struct dpu_mdss_cfg, with static instances of struct dpu_mdss_cfg. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/488166/ Link: https://lore.kernel.org/r/20220602202447.1755115-8-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: constify struct dpu_mdss_cfgDmitry Baryshkov
Mark struct dpu_mdss_cfg instance as a const pointer. This is mostly a preparation for the next patch. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488164/ Link: https://lore.kernel.org/r/20220602202447.1755115-7-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: change catalog->dma_cfg to be a const pointerDmitry Baryshkov
Change dpu_mdss_cfg::dma_cfg to be a const pointer rather than embedding the dpu_reg_dma_cfg struct into the struct dpu_mdss_cfg. Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488162/ Link: https://lore.kernel.org/r/20220602202447.1755115-6-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: change catalog->perf to be a const pointerDmitry Baryshkov
Change dpu_mdss_cfg::perf to be a const pointer rather than embedding the dpu_perf_cfg struct into the struct dpu_mdss_cfg. Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488158/ Link: https://lore.kernel.org/r/20220602202447.1755115-5-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: remove hwversion field from data structuresDmitry Baryshkov
The driver should not depend on hw revision for detecting features. Instead it should use features from the hw catalog. Drop the hwversion field from struct dpu_mdss_cfg and struct dpu_hw_blk_reg_map. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488160/ Link: https://lore.kernel.org/r/20220602202447.1755115-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: move VBIF_XINL_QOS_LVL_REMAP size to hw_catalogDmitry Baryshkov
Rather than detecting VBIF_XINL_QOS_LVL_REMAP_000 based on the hwversion, push the offset to the hw_catalog. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488156/ Link: https://lore.kernel.org/r/20220602202447.1755115-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: use feature bit for LM combined alpha checkDmitry Baryshkov
Rather than checking hwversion, follow the usual patter and add special bit to the lm->features to check whether the LM has combined or separate alpha registers. While we are at it, rename dpu_hw_lm_setup_blend_config_sdm845() to dpu_hw_lm_setup_blend_config_combined_alpha(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/488155/ Link: https://lore.kernel.org/r/20220602202447.1755115-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: add writeback support for sc7180Abhinav Kumar
Add writeback support for sc7180 devices. This has been validated on sc7180 chromebook using IGT writeback test suite. localhost /usr/local/libexec/igt-gpu-tools # ./kms_writeback Starting subtest: writeback-pixel-formats Subtest writeback-pixel-formats: SUCCESS (0.001s) Starting subtest: writeback-invalid-parameters Subtest writeback-invalid-parameters: SUCCESS (0.004s) Starting subtest: writeback-fb-id Subtest writeback-fb-id: SUCCESS (0.009s) Starting subtest: writeback-check-output Subtest writeback-check-output: SUCCESS (0.203s) Adding this will increase IGT coverage on chromebooks and also allow using writeback functionality for other use-cases as necessary. Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/485787/ Link: https://lore.kernel.org/r/20220510235439.31916-1-quic_abhinavk@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-06-28Merge tag 'drm-msm-fixes-2022-06-28' into msm-next-stagingRob Clark
Merge v5.19 fixes to avoid merge conflicts Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-06-27drm/msm/gem: Fix error return on fence id alloc failRob Clark
This was a typo, we didn't actually want to return zero. Fixes: a61acbbe9cf8 ("drm/msm: Track "seqno" fences by idr") Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/491145/ Link: https://lore.kernel.org/r/20220624184528.4036837-1-robdclark@gmail.com
2022-06-23drm/msm/dpu: Fix variable dereferenced before checksunliming
Fixes the following smatch warning: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c:261 dpu_encoder_phys_wb_atomic_check() warn: variable dereferenced before check 'conn_state' Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback") Signed-off-by: sunliming <sunliming@kylinos.cn> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/490850/ Link: https://lore.kernel.org/r/20220623012707.453972-1-sunliming@kylinos.cn Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2022-06-23drm/msm/dp: reset drm_dev to NULL at dp_display_unbind()Kuogee Hsieh
During msm initialize phase, dp_display_unbind() will be called to undo initializations had been done by dp_display_bind() previously if there is error happen at msm_drm_bind. Under this kind of circumstance, drm_device may not be populated completed which causes system crash at drm_dev_dbg(). This patch reset drm_dev to NULL so that following drm_dev_dbg() will not refer to any internal fields of drm_device to prevent system from crashing. Below are panic stack trace, [ 53.584904] Unable to handle kernel paging request at virtual address 0000000070018001 . [ 53.702212] Hardware name: Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+) (DT) [ 53.710445] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 53.717596] pc : string_nocheck+0x1c/0x64 [ 53.721738] lr : string+0x54/0x60 [ 53.725162] sp : ffffffc013d6b650 [ 53.728590] pmr_save: 000000e0 [ 53.731743] x29: ffffffc013d6b650 x28: 0000000000000002 x27: 0000000000ffffff [ 53.739083] x26: ffffffc013d6b710 x25: ffffffd07a066ae0 x24: ffffffd07a419f97 [ 53.746420] x23: ffffffd07a419f99 x22: ffffff81fef360d4 x21: ffffff81fef364d4 [ 53.753760] x20: ffffffc013d6b6f8 x19: ffffffd07a06683c x18: 0000000000000000 [ 53.761093] x17: 4020386678302f30 x16: 00000000000000b0 x15: ffffffd0797523c8 [ 53.768429] x14: 0000000000000004 x13: ffff0000ffffff00 x12: ffffffd07a066b2c [ 53.775780] x11: 0000000000000000 x10: 000000000000013c x9 : 0000000000000000 [ 53.783117] x8 : ffffff81fef364d4 x7 : 0000000000000000 x6 : 0000000000000000 [ 53.790445] x5 : 0000000000000000 x4 : ffff0a00ffffff04 x3 : ffff0a00ffffff04 [ 53.797783] x2 : 0000000070018001 x1 : ffffffffffffffff x0 : ffffff81fef360d4 [ 53.805136] Call trace: [ 53.807667] string_nocheck+0x1c/0x64 [ 53.811439] string+0x54/0x60 [ 53.814498] vsnprintf+0x374/0x53c [ 53.818009] pointer+0x3dc/0x40c [ 53.821340] vsnprintf+0x398/0x53c [ 53.824854] vscnprintf+0x3c/0x88 [ 53.828274] __trace_array_vprintk+0xcc/0x2d4 [ 53.832768] trace_array_printk+0x8c/0xb4 [ 53.836900] drm_trace_printf+0x74/0x9c [ 53.840875] drm_dev_dbg+0xfc/0x1b8 [ 53.844480] dp_pm_suspend+0x70/0xf8 [ 53.848164] dpm_run_callback+0x60/0x1a0 [ 53.852222] __device_suspend+0x304/0x3f4 [ 53.856363] dpm_suspend+0xf8/0x3a8 [ 53.859959] dpm_suspend_start+0x8c/0xc0 Fixes: 570d3e5d28db ("drm/msm/dp: stop event kernel thread when DP unbind") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/490756/ Link: https://lore.kernel.org/r/1655927731-22396-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2022-06-23drm/msm/dpu: Increment vsync_cnt before waking up userspaceStephen Boyd
The 'vsync_cnt' is used to count the number of frames for a crtc. Unfortunately, we increment the count after waking up userspace via dpu_crtc_vblank_callback() calling drm_crtc_handle_vblank(). drm_crtc_handle_vblank() wakes up userspace processes that have called drm_wait_vblank_ioctl(), and if that ioctl is expecting the count to increase it won't. Increment the count before calling into the drm APIs so that we don't have to worry about ordering the increment with anything else in drm. This fixes a software video decode test that fails to see frame counts increase on Trogdor boards. Cc: Mark Yacoub <markyacoub@chromium.org> Cc: Jessica Zhang <quic_jesszhan@quicinc.com> Fixes: 885455d6bf82 ("drm/msm: Change dpu_crtc_get_vblank_counter to use vsync count.") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # Trogdor (sc7180) Patchwork: https://patchwork.freedesktop.org/patch/490531/ Link: https://lore.kernel.org/r/20220622023855.2970913-1-swboyd@chromium.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2022-06-18drm/msm/dp: force link training for display resolution changeKuogee Hsieh
Display resolution change is implemented through drm modeset. Older modeset (resolution) has to be disabled first before newer modeset (resolution) can be enabled. Display disable will turn off both pixel clock and main link clock so that main link have to be re-trained during display enable to have new video stream flow again. At current implementation, display enable function manually kicks up irq_hpd_handle which will read panel link status and start link training if link status is not in sync state. However, there is rare case that a particular panel links status keep staying in sync for some period of time after main link had been shut down previously at display disabled. In this case, main link retraining will not be executed by irq_hdp_handle(). Hence video stream of newer display resolution will fail to be transmitted to panel due to main link is not in sync between host and panel. This patch will bypass irq_hpd_handle() in favor of directly call dp_ctrl_on_stream() to always perform link training in regardless of main link status. So that no unexpected exception resolution change failure cases will happen. Also this implementation are more efficient than manual kicking off irq_hpd_handle function. Changes in v2: -- set force_link_train flag on DP only (is_edp == false) Changes in v3: -- revise commit text -- add Fixes tag Changes in v4: -- revise commit text Changes in v5: -- fix spelling at commit text Changes in v6: -- split dp_ctrl_on_stream() for phy test case -- revise commit text for modeset Changes in v7: -- drop 0 assignment at local variable (ret = 0) Changes in v8: -- add patch to remove pixel_rate from dp_ctrl Changes in v9: -- forward declare dp_ctrl_on_stream_phy_test_report() Fixes: 62671d2ef24b ("drm/msm/dp: fixes wrong connection state caused by failure of link train") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/489895/ Link: https://lore.kernel.org/r/1655411200-7255-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-06-18drm/msm/dpu: limit wb modes based on max_mixer_widthAbhinav Kumar
As explained in [1], using max_linewidth to limit the modes does not seem to remove 4K modes on chipsets such as sm8250 where the max_linewidth actually supports 4k. This would have been alright if dual SSPP support was present but otherwise fails the per SSPP bandwidth check. The ideal way to implement this would be to filter out the modes which will exceed the bandwidth check by computing it. But this would be an exhaustive solution till we have dual SSPP support. Let's instead use max_mixer_width to limit the modes. max_mixer_width still remains 2560 on sm8250 so even if the max_linewidth is 4096, the only way 4k modes could have been supported is to have source split enabled on the SSPP. Since source split support is not enabled yet in DPU driver, enforce max_mixer_width as the upper limit on the modes. [1] https://patchwork.freedesktop.org/patch/489662/ Fixes: e67dcecda06f ("drm/msm/dpu: limit writeback modes according to max_linewidth") Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489893/ Link: https://lore.kernel.org/r/1655407606-21760-1-git-send-email-quic_abhinavk@quicinc.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-06-18drm/msm/dp: check core_initialized before disable interrupts at ↵Kuogee Hsieh
dp_display_unbind() During msm initialize phase, dp_display_unbind() will be called to undo initializations had been done by dp_display_bind() previously if there is error happen at msm_drm_bind. In this case, core_initialized flag had to be check to make sure clocks is on before update DP controller register to disable HPD interrupts. Otherwise system will crash due to below NOC fatal error. QTISECLIB [01f01a7ad]CNOC2 ERROR: ERRLOG0_LOW = 0x00061007 QTISECLIB [01f01a7ad]GEM_NOC ERROR: ERRLOG0_LOW = 0x00001007 QTISECLIB [01f0371a0]CNOC2 ERROR: ERRLOG0_HIGH = 0x00000003 QTISECLIB [01f055297]GEM_NOC ERROR: ERRLOG0_HIGH = 0x00000003 QTISECLIB [01f072beb]CNOC2 ERROR: ERRLOG1_LOW = 0x00000024 QTISECLIB [01f0914b8]GEM_NOC ERROR: ERRLOG1_LOW = 0x00000042 QTISECLIB [01f0ae639]CNOC2 ERROR: ERRLOG1_HIGH = 0x00004002 QTISECLIB [01f0cc73f]GEM_NOC ERROR: ERRLOG1_HIGH = 0x00004002 QTISECLIB [01f0ea092]CNOC2 ERROR: ERRLOG2_LOW = 0x0009020c QTISECLIB [01f10895f]GEM_NOC ERROR: ERRLOG2_LOW = 0x0ae9020c QTISECLIB [01f125ae1]CNOC2 ERROR: ERRLOG2_HIGH = 0x00000000 QTISECLIB [01f143be7]GEM_NOC ERROR: ERRLOG2_HIGH = 0x00000000 QTISECLIB [01f16153a]CNOC2 ERROR: ERRLOG3_LOW = 0x00000000 QTISECLIB [01f17fe07]GEM_NOC ERROR: ERRLOG3_LOW = 0x00000000 QTISECLIB [01f19cf89]CNOC2 ERROR: ERRLOG3_HIGH = 0x00000000 QTISECLIB [01f1bb08e]GEM_NOC ERROR: ERRLOG3_HIGH = 0x00000000 QTISECLIB [01f1d8a31]CNOC2 ERROR: SBM1 FAULTINSTATUS0_LOW = 0x00000002 QTISECLIB [01f1f72a4]GEM_NOC ERROR: SBM0 FAULTINSTATUS0_LOW = 0x00000001 QTISECLIB [01f21a217]CNOC3 ERROR: ERRLOG0_LOW = 0x00000006 QTISECLIB [01f23dfd3]NOC error fatal changes in v2: -- drop the first patch (drm/msm: enable msm irq after all initializations are done successfully at msm_drm_init()) since the problem had been fixed by other patch Fixes: 570d3e5d28db ("drm/msm/dp: stop event kernel thread when DP unbind") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/488387/ Link: https://lore.kernel.org/r/1654538139-7450-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-06-18drm/msm/mdp4: Fix refcount leak in mdp4_modeset_init_intfMiaoqian Lin
of_graph_get_remote_node() returns remote device node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: 86418f90a4c1 ("drm: convert drivers to use of_graph_get_remote_node") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/488473/ Link: https://lore.kernel.org/r/20220607110841.53889-1-linmq006@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-06-18drm/msm: Don't overwrite hw fence in hw_initRob Clark
Prior to the last commit, this could result in setting the GPU written fence value back to an older value, if we had missed updating completed_fence prior to suspend. This was mostly harmless as the GPU would eventually overwrite it again with the correct value. But we should just not do this. Instead just leave a sanity check that the fence looks plausible (in case the GPU scribbled on memory). Reported-by: Steev Klimaszewski <steev@kali.org> Fixes: 95d1deb02a9c ("drm/msm/gem: Add fenced vma unpin") Signed-off-by: Rob Clark <robdclark@chromium.org> Tested-by: Steev Klimaszewski <steev@kali.org> Patchwork: https://patchwork.freedesktop.org/patch/490138/ Link: https://lore.kernel.org/r/20220618161120.3451993-2-robdclark@gmail.com
2022-06-18drm/msm: Drop update_fences()Rob Clark
I noticed while looking at some traces, that we could miss calls to msm_update_fence(), as the irq could have raced with retire_submits() which could have already popped the last submit on a ring out of the queue of in-flight submits. But walking the list of submits in the irq handler isn't really needed, as dma_fence_is_signaled() will dtrt. So lets just drop it entirely. v2: use spin_lock_irqsave/restore as we are no longer protected by the spin_lock_irqsave/restore() in update_fences() Reported-by: Steev Klimaszewski <steev@kali.org> Fixes: 95d1deb02a9c ("drm/msm/gem: Add fenced vma unpin") Signed-off-by: Rob Clark <robdclark@chromium.org> Tested-by: Steev Klimaszewski <steev@kali.org> Patchwork: https://patchwork.freedesktop.org/patch/490136/ Link: https://lore.kernel.org/r/20220618161120.3451993-1-robdclark@gmail.com
2022-06-15drm/msm/gem: Drop early returns in close/purge vmaRob Clark
Keep the warn, but drop the early return. If we do manage to hit this sort of issue, skipping the cleanup just makes things worse (dangling drm_mm_nodes when the msm_gem_vma is freed, etc). Whereas the worst that happens if we tear down a mapping the GPU is accessing is that we get GPU iova faults, but otherwise the world keeps spinning. Signed-off-by: Rob Clark <robdclark@chromium.org> Tested-by: Steev Klimaszewski <steev@kali.org> Reported-by: Steev Klimaszewski <steev@kali.org> Patchwork: https://patchwork.freedesktop.org/patch/489115/ Link: https://lore.kernel.org/r/20220610172055.2337977-1-robdclark@gmail.com
2022-06-15drm/msm/gem: Separate object and vma unpinRob Clark
Previously the BO_PINNED state in the submit was tracking two related but different things: (1) that the buffer object was pinned, and (2) that the vma (mapping within a set of pagetables) was pinned. But with fenced vma unpin (needed so that userspace couldn't race with retire path for releasing a vma) these two were decoupled. The fact that the BO_PINNED flag was already cleared meant that we leaked the bo pin count which should have been dropped when the submit was retired. So split this state into BO_OBJ_PINNED and BO_VMA_PINNED, so they can be dropped independently. Fixes: 95d1deb02a9c ("drm/msm/gem: Add fenced vma unpin") Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/487559/ Link: https://lore.kernel.org/r/20220527172341.2151005-1-robdclark@gmail.com
2022-06-14drm/msm: use for_each_sgtable_sg to iterate over scatterlistJonathan Marek
The dma_map_sgtable() call (used to invalidate cache) overwrites sgt->nents with 1, so msm_iommu_pagetable_map maps only the first physical segment. To fix this problem use for_each_sgtable_sg(), which uses orig_nents. Fixes: b145c6e65eb0 ("drm/msm: Add support to create a local pagetable") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20220613221019.11399-1-jonathan@marek.ca Signed-off-by: Rob Clark <robdclark@chromium.org>
generated by cgit (git 2.34.1) at 2025-07-15 13:19:12 +0000