summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-07-31vmpressure: make sure there are no events queued after memcg is offlinedMichal Hocko
vmpressure is called synchronously from reclaim where the target_memcg is guaranteed to be alive but the eventfd is signaled from the work queue context. This means that memcg (along with vmpressure structure which is embedded into it) might go away while the work item is pending which would result in use-after-release bug. We have two possible ways how to fix this. Either vmpressure pins memcg before it schedules vmpr->work and unpin it in vmpressure_work_fn or explicitely flush the work item from the css_offline context (as suggested by Tejun). This patch implements the later one and it introduces vmpressure_cleanup which flushes the vmpressure work queue item item. It hooks into mem_cgroup_css_offline after the memcg itself is cleaned up. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Michal Hocko <mhocko@suse.cz> Reported-by: Tejun Heo <tj@kernel.org> Cc: Anton Vorontsov <anton.vorontsov@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Li Zefan <lizefan@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-31vmpressure: do not check for pending work to prevent from new workMichal Hocko
because it is racy and it doesn't give us much anyway as schedule_work handles this case already. Signed-off-by: Michal Hocko <mhocko@suse.cz> Reported-by: Tejun Heo <tj@kernel.org> Cc: Anton Vorontsov <anton.vorontsov@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Li Zefan <lizefan@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-31vmpressure: change vmpressure::sr_lock to spinlockMichal Hocko
There is nothing that can sleep inside critical sections protected by this lock and those sections are really small so there doesn't make much sense to use mutex for them. Change the log to a spinlock Signed-off-by: Michal Hocko <mhocko@suse.cz> Reported-by: Tejun Heo <tj@kernel.org> Cc: Anton Vorontsov <anton.vorontsov@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Li Zefan <lizefan@huawei.com> Reviewed-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-31printk: rename struct log to struct printk_logJoe Perches
Rename the struct to enable moving portions of printk.c to separate files. The rename changes output of /proc/vmcoreinfo. Signed-off-by: Joe Perches <joe@perches.com> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-31printk: use pointer for console_cmdline indexingJoe Perches
Make the code a bit more compact by always using a pointer for the active console_cmdline. Move overly indented code to correct indent level. Signed-off-by: Joe Perches <joe@perches.com> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-31printk: move braille console support into separate braille.[ch] filesJoe Perches
Create files with prototypes and static inlines for braille support. Make braille_console functions return 1 on success. Corrected CONFIG_A11Y_BRAILLE_CONSOLE=n _braille_console_setup return value to NULL. Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-31printk: add console_cmdline.hJoe Perches
Add an include file for the console_cmdline struct so that the braille console driver can be separated. Signed-off-by: Joe Perches <joe@perches.com> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-31printk: move to separate directory for easier modificationJoe Perches
Make it easier to break up printk into bite-sized chunks. Remove printk path/filename from comment. Signed-off-by: Joe Perches <joe@perches.com> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-31drivers/rtc/rtc-twl.c: fix: rtcX/wakealarm attribute isn't createdGrygorii Strashko
The device_init_wakeup() should be called before rtc_device_register(). Otherwise, sysfs "sys/class/rtc/rtcX/wakealarm" attribute will not be seen from User space. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Kevin Hilman <khilman@linaro.org> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-31mm: zbud: fix condition check on allocation sizeHeesub Shin
zbud_alloc() incorrectly verifies the size of allocation limit. It should deny the allocation request greater than (PAGE_SIZE - ZHDR_SIZE_ALIGNED - CHUNK_SIZE), not (PAGE_SIZE - ZHDR_SIZE_ALIGNED) which has no remaining spaces for its buddy. There is no point in spending the entire zbud page storing only a single page, since we don't have any benefits. Signed-off-by: Heesub Shin <heesub.shin@samsung.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Dongjun Shin <d.j.shin@samsung.com> Cc: Sunae Seo <sunae.seo@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-31thp, mm: avoid PageUnevictable on active/inactive lru listsKirill A. Shutemov
active/inactive lru lists can contain unevicable pages (i.e. ramfs pages that have been placed on the LRU lists when first allocated), but these pages must not have PageUnevictable set - otherwise shrink_[in]active_list goes crazy: kernel BUG at /home/space/kas/git/public/linux-next/mm/vmscan.c:1122! 1090 static unsigned long isolate_lru_pages(unsigned long nr_to_scan, 1091 struct lruvec *lruvec, struct list_head *dst, 1092 unsigned long *nr_scanned, struct scan_control *sc, 1093 isolate_mode_t mode, enum lru_list lru) 1094 { ... 1108 switch (__isolate_lru_page(page, mode)) { 1109 case 0: ... 1116 case -EBUSY: ... 1121 default: 1122 BUG(); 1123 } 1124 } ... 1130 } __isolate_lru_page() returns EINVAL for PageUnevictable(page). For lru_add_page_tail(), it means we should not set PageUnevictable() for tail pages unless we're sure that it will go to LRU_UNEVICTABLE. Let's just copy PG_active and PG_unevictable from head page in __split_huge_page_refcount(), it will simplify lru_add_page_tail(). This will fix one more bug in lru_add_page_tail(): if page_evictable(page_tail) is false and PageLRU(page) is true, page_tail will go to the same lru as page, but nobody cares to sync page_tail active/inactive state with page. So we can end up with inactive page on active lru. The patch will fix it as well since we copy PG_active from head page. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mgorman@suse.de> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-31mm/swap.c: clear PageActive before adding pages onto unevictable listNaoya Horiguchi
As a result of commit 13f7f78981e4 ("mm: pagevec: defer deciding which LRU to add a page to until pagevec drain time"), pages on unevictable lists can have both of PageActive and PageUnevictable set. This is not only confusing, but also corrupts page migration and shrink_[in]active_list. This patch fixes the problem by adding ClearPageActive before adding pages into unevictable list. It also cleans up VM_BUG_ONs. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mgorman@suse.de> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-31arch/x86/platform/ce4100/ce4100.c: include reboot.hAndrew Morton
Fix the build: arch/x86/platform/ce4100/ce4100.c: In function 'x86_ce4100_early_setup': arch/x86/platform/ce4100/ce4100.c:165:2: error: 'reboot_type' undeclared (first use in this function) Reported-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-31mm: sched: numa: fix NUMA balancing when !SCHED_DEBUGDave Kleikamp
Commit 3105b86a9fee ("mm: sched: numa: Control enabling and disabling of NUMA balancing if !SCHED_DEBUG") defined numabalancing_enabled to control the enabling and disabling of automatic NUMA balancing, but it is never used. I believe the intention was to use this in place of sched_feat_numa(NUMA). Currently, if SCHED_DEBUG is not defined, sched_feat_numa(NUMA) will never be changed from the initial "false". Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-31rapidio: fix use after free in rio_unregister_scan()Dan Carpenter
We're freeing the list iterator so we can't move to the next entry. Since there is only one matching mport_id, we can just break after finding it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Ryan Mallon <rmallon@gmail.com> Acked-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-31.gitignore: ignore *.lz4 filesMarkus Trippelsdorf
Now that lz4 kernel compression is available, add *.lz4 to .gitignore. Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de> Acked-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-31MAINTAINERS: dynamic debug: Jason's not there...Joe Perches
He must be too, umm, busy to update his own bouncing email address too. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Jason Baron <jbaron@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-31dmi_scan: add comments on dmi_present() and the loop in dmi_scan_machine()Ben Hutchings
My previous refactoring in commit 79bae42d51a5 ("dmi_scan: refactor dmi_scan_machine(), {smbios,dmi}_present()") resulted in slightly tricky code (though I think it's more elegant). Explain what it's doing. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Zhenzhong Duan <zhenzhong.duan@oracle.com> Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-31ocfs2/refcounttree: add the missing NULL check of the return value of ↵Gu Zheng
find_or_create_page() Add the missing NULL check of the return value of find_or_create_page() in function ocfs2_duplicate_clusters_by_page(). [akpm@linux-foundation.org: fix layout, per Joel] Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-31mm: mempolicy: fix mbind_range() && vma_adjust() interactionOleg Nesterov
vma_adjust() does vma_set_policy(vma, vma_policy(next)) and this is doubly wrong: 1. This leaks vma->vm_policy if it is not NULL and not equal to next->vm_policy. This can happen if vma_merge() expands "area", not prev (case 8). 2. This sets the wrong policy if vma_merge() joins prev and area, area is the vma the caller needs to update and it still has the old policy. Revert commit 1444f92c8498 ("mm: merging memory blocks resets mempolicy") which introduced these problems. Change mbind_range() to recheck mpol_equal() after vma_merge() to fix the problem that commit tried to address. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Steven T Hampson <steven.t.hampson@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-31Merge branches 'cma', 'cxgb3', 'cxgb4', 'ipoib', 'misc', 'mlx4', 'mlx5', ↵Roland Dreier
'nes', 'ocrdma' and 'qib' into for-next
2013-07-31IPoIB: Fix pkey change flow for virtualization environmentsErez Shitrit
IPoIB's required behaviour w.r.t to the pkey used by the device is the following: - For "parent" interfaces (e.g ib0, ib1, etc) who are created automatically as a result of hot-plug events from the IB core, the driver needs to take whatever pkey vlaue it finds in index 0, and stick to that index. - For child interfaces (e.g ib0.8001, etc) created by admin directive, the driver needs to use and stick to the value provided during its creation. In SR-IOV environment its possible for the VF probe to take place before the cloud management software provisions the suitable pkey for the VF in the paravirtualed PKEY table index 0. When this is the case, the VF IB stack will find in index 0 an invalide pkey, which is all zeros. Moreover, the cloud managment can assign the pkey value at index 0 at any time of the guest life cycle. The correct behavior for IPoIB to address these requirements for parent interfaces is to use PKEY_CHANGE event as trigger to optionally re-init the device pkey value and re-create all the relevant resources accordingly, if the value of the pkey in index 0 has changed (from invalid to valid or from valid value X to invalid value Y). This patch enhances the heavy flushing code which is triggered by pkey change event, to behave correctly for parent devices. For child devices, the code remains the same, namely chases pkey value and not index. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-31IPoIB: Make sure child devices use valid/proper pkeysOr Gerlitz
Make sure that the IB invalid pkey (0x0000 or 0x8000) isn't used for child devices. Also, make sure to always set the full membership bit for the pkey of devices created by rtnl link ops. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-31IB/core: Create QP1 using the pkey index which contains the default pkeyJack Morgenstein
Currently, QP1 is created using pkey index 0. This patch simply looks for the index containing the default pkey, rather than hard-coding pkey index 0. This change will have no effect in native mode, since QP0 and QP1 are created before the SM configures the port, so pkey table will still be the default table defined by the IB Spec, in C10-123: "If non-volatile storage is not used to hold P_Key Table contents, then if a PM (Partition Manager) is not present, and prior to PM initialization of the P_Key Table, the P_Key Table must act as if it contains a single valid entry, at P_Key_ix = 0, containing the default partition key. All other entries in the P_Key Table must be invalid." Thus, in the native mode case, the driver will find the default pkey at index 0 (so it will be no different than the hard-coding). However, in SR-IOV mode, for VFs, the pkey table may be paravirtualized, so that the VF's pkey index zero may not necessarily be mapped to the real pkey index 0. For VFs, therefore, it is important to find the virtual index which maps to the real default pkey. This commit does the following for QP1 creation: 1. Find the pkey index containing the default pkey, and use that index if found. ib_find_pkey() returns the index of the limited-membership default pkey (0x7FFF) if the full-member default pkey is not in the table. 2. If neither form of the default pkey is found, use pkey index 0 (previous behavior). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-31mlx5_core: Variable may be used uninitializedAndi Shyti
In the sq_overhead() function, if qp_typ is equal to IB_QPT_RC, size will be used uninitialized. Signed-off-by: Andi Shyti <andi@etezian.org> Acked-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-31mlx5_core: Implement new initialization sequenceEli Cohen
Introduce enbale_hca and disable_hca commands to signify when the driver starts or ceases to operate on the device. In addition the driver will use boot and init pages count; boot pages is required to allow firmware to complete boot commands and the other to complete init hca. Command interface revision is bumped to 4 to enforce using supported firmware. This patch breaks compatibility with old versions of firmware (< 4); however, the first GA firmware we will publish will support version 4 so this should not be a problem. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-31mlx5_core: Fix use after free in mlx5_cmd_comp_handler()Dan Carpenter
We can't dereference "ent" after passing it to free_cmd(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-31IB/mlx5: Fix stack info leak in mlx5_ib_alloc_ucontext()Dan Carpenter
We don't set "resp.reserved". Since it's at the end of the struct that means we don't have to copy it to the user. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-31IB/mlx5: Fix error return code in init_one()Wei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-31ARM: allow kuser helpers to be removed from the vector pageRussell King
Provide a kernel configuration option to allow the kernel user helpers to be removed from the vector page, thereby preventing their use with ROP (return orientated programming) attacks. This option is only visible for CPU architectures which natively support all the operations which kernel user helpers would normally provide, and must be enabled with caution. Cc: <stable@vger.kernel.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-31ARM: update FIQ support for relocation of vectorsRussell King
FIQ should no longer copy the FIQ code into the user visible vector page. Instead, it should use the hidden page. This change makes that happen. Cc: <stable@vger.kernel.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-31ARM: use linker magic for vectors and vector stubsRussell King
Use linker magic to create the vectors and vector stubs: we can tell the linker to place them at an appropriate VMA, but keep the LMA within the kernel. This gets rid of some unnecessary symbol manipulation, and have the linker calculate the relocations appropriately. Cc: <stable@vger.kernel.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-31ARM: move vector stubsRussell King
Move the machine vector stubs into the page above the vector page, which we can prevent from being visible to userspace. Also move the reset stub, and place the swi vector at a location that the 'ldr' can get to it. This hides pointers into the kernel which could give valuable information to attackers, and reduces the number of exploitable instructions at a fixed address. Cc: <stable@vger.kernel.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-31ARM: poison memory between kuser helpersRussell King
Poison the memory between each kuser helper. This ensures that any branch between the kuser helpers will be appropriately trapped. Cc: <stable@vger.kernel.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-31ARM: poison the vectors pageRussell King
Fill the empty regions of the vectors page with an exception generating instruction. This ensures that any inappropriate branch to the vector page is appropriately trapped, rather than just encountering some code to execute. (The vectors page was filled with zero before, which corresponds with the "andeq r0, r0, r0" instruction - a no-op.) Cc: <stable@vger.kernel.org> Acked-by Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-31Merge remote-tracking branch 'asoc/fix/wm0010' into asoc-linusMark Brown
2013-07-31Merge remote-tracking branch 'asoc/fix/dapm' into asoc-linusMark Brown
2013-07-31Merge remote-tracking branch 'asoc/fix/blackfin' into asoc-linusMark Brown
2013-07-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix association failures not triggering a connect-failure event in cfg80211, from Johannes Berg. 2) Eliminate a potential NULL deref with older iptables tools when configuring xt_socket rules, from Eric Dumazet. 3) Missing RTNL locking in wireless regulatory code, from Johannes Berg. 4) Fix OOPS caused by firmware loading races in ath9k_htc, from Alexey Khoroshilov. 5) Fix usb URB leak in usb_8dev CAN driver, also from Alexey Khoroshilov. 6) VXLAN namespace teardown fails to unregister devices, from Stephen Hemminger. 7) Fix multicast settings getting dropped by firmware in qlcnic driver, from Sucheta Chakraborty. 8) Add sysctl range enforcement for tcp_syn_retries, from Michal Tesar. 9) Fix a nasty bug in bridging where an active timer would get reinitialized with a setup_timer() call. From Eric Dumazet. 10) Fix use after free in new mlx5 driver, from Dan Carpenter. 11) Fix freed pointer reference in ipv6 multicast routing on namespace cleanup, from Hannes Frederic Sowa. 12) Some usbnet drivers report TSO and SG in their feature set, but the usbnet layer doesn't really support them. From Eric Dumazet. 13) Fix crash on EEH errors in tg3 driver, from Gavin Shan. 14) Drop cb_lock when requesting modules in genetlink, from Stanislaw Gruszka. 15) Kernel stack leaks in cbq scheduler and af_key pfkey messages, from Dan Carpenter. 16) FEC driver erroneously signals NETDEV_TX_BUSY on transmit leading to endless loops, from Uwe Kleine-König. 17) Fix hangs from loading mvneta driver, from Arnaud Patard. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (84 commits) mlx5: fix error return code in mlx5_alloc_uuars() mvneta: Try to fix mvneta when compiled as module mvneta: Fix hang when loading the mvneta driver atl1c: Fix misuse of netdev_alloc_skb in refilling rx ring genetlink: fix usage of NLM_F_EXCL or NLM_F_REPLACE af_key: more info leaks in pfkey messages net/fec: Don't let ndo_start_xmit return NETDEV_TX_BUSY without link net_sched: Fix stack info leak in cbq_dump_wrr(). igb: fix vlan filtering in promisc mode when not in VT mode ixgbe: Fix Tx Hang issue with lldpad on 82598EB genetlink: release cb_lock before requesting additional module net: fec: workaround stop tx during errata ERR006358 qlcnic: Fix diagnostic interrupt test for 83xx adapters. qlcnic: Fix setting Guest VLAN qlcnic: Fix operation type and command type. qlcnic: Fix initialization of work function. Revert "atl1c: Fix misuse of netdev_alloc_skb in refilling rx ring" atl1c: Fix misuse of netdev_alloc_skb in refilling rx ring net/tg3: Fix warning from pci_disable_device() net/tg3: Fix kernel crash ...
2013-07-31IB/mlx4: Use default pkey when creating tunnel QPsJack Morgenstein
When creating tunnel QPs for special QP tunneling, look for the default pkey in the slave's virtual pkey table. If it is present, use the real pkey index where the default pkey is located. If the default pkey is not found in the pkey table, use the real pkey index which is stored at index 0 in the slave's virtual pkey table (this is the current behavior). This change is required to support cloud computing, where the paravirtualized index of the default pkey is moved to index 1 or higher. The pkey at paravirtualized index 0 is used for the default IPoIB interface created by the VF. Its possible for the pkey value at paravirtualized index 0 to be invalid (zero) at VF probe time (pkey index 0 is mapped to real pkey index 127, which contains pkey = 0). At some point after the VF probe, the cloud computing interface at the hypervisor maps virtual index 0 for the VF to the pkey index containing the pkey that IPoIB will use in its operation. However, when the tunnel QP is created, the pkey at the slave's virtual index 0 is still mapped to the invalid pkey index, so tunnel QP creation fails. This commit causes the hypervisor to search for the default pkey in the slave's pkey table -- and this pkey is present in the table (at index > 0) at tunnel QP creation time, so that the tunnel QP creation will succeed. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-31Merge tag 'nfc-fixes-3.11-2' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-fixes Samuel Ortiz <sameo@linux.intel.com> says: 'This is the second NFC fixes pull request for 3.11. We have: - A build failure fix for the NCI SPI transport layer due to a missing CRC_CCITT Kconfig dependency. - A netlink command rename: CMD_FW_UPLOAD was merged during the 3.11 merge window but the typical terminology for loading a firmware to a target is firmware download rather than upload. In order to avoid any confusion in a file exported to userspace, we rename this command into CMD_FW_DOWNLOAD." Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-31Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Conflicts: net/bluetooth/hci_core.c
2013-07-31MAINTAINERS: change email of TI WiLink drivers' maintainerLuciano Coelho
Soon the coelho@ti.com email will not be valid anymore, so change it to my private one. Cc: Luciano Coelho <luca@coelho.fi> Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-31mwifiex: fix command 0x2c timeout during p2p_find or p2p_connectStone Piao
We missed bss_mode check for P2P client. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-31mwifiex: fix wrong data rates in P2P clientAvinash Patil
This patch fixes an issue wherein adhoc rates were being copied into association request from P2P client. Cc: <stable@vger.kernel.org> # 3.10.y Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-31mwifiex: check for bss_role instead of bss_mode for STA operationsAvinash Patil
This patch fixes an issue wherein association would fail on P2P interfaces. This happened because we are checking priv->mode against NL80211_IFTYPE_STATION. While this check is correct for infrastructure stations, it would fail P2P clients for which mode is NL80211_IFTYPE_P2P_CLIENT. Better check would be bss_role which has only 2 values: STA/AP. Cc: <stable@vger.kernel.org> # 3.10.y Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-31Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS fixes from Ralf Baechle: - BMIPS SMP fixes - a build fix necessary for older compilers - two more bugs found my Chandras' testing - and one more build fix * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: BMIPS: fix slave CPU booting when physical CPU is not 0 MIPS: BMIPS: do not change interrupt routing depending on boot CPU MIPS: powertv: Fix arguments for free_reserved_area() MIPS: Set default CPU type for BCM47XX platforms MIPS: uapi/asm/siginfo.h: Fix GCC 4.1.2 compilation MIPS: Fix multiple definitions of UNCAC_BASE.
2013-07-31Merge tag 'stable/for-linus-3.11-rc3-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen fixes from Konrad Rzeszutek Wilk: - Three fixes for ARM/ARM64 to either compile or not certain generic drivers - Fix for avoiding a potential deadlock when an user space event channel is destroyed. - Fix a workqueue resuming multiple times. * tag 'stable/for-linus-3.11-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/tmem: do not allow XEN_TMEM on ARM64 xen/evtchn: avoid a deadlock when unbinding an event channel xen/arm: enable PV control for ARM xen/arm64: Don't compile cpu hotplug xenbus: frontend resume cleanup
2013-07-31Merge tag 'xen-arm-3.11-rc2-warn-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sstabellini/xen Pull Xen ARM fix from Stefano Stabellini. Update xen_restart to new calling convention. * tag 'xen-arm-3.11-rc2-warn-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/sstabellini/xen: xen/arm,arm64: update xen_restart after ff701306cd49 and 7b6d864b48d9
2013-07-31Merge tag 'usb-3.11-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some tiny USB fixes for 3.11-rc4 Nothing major, some gadget fixes, some new device ids, a new tiny driver for the ANT+ USB device, and a number of fixes for the mos7840 driver that were much needed" * tag 'usb-3.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: serial: ftdi_sio: add more RT Systems ftdi devices usb: chipidea: fix the build error with randconfig usb: chipidea: cast PORTSC_PTS and DEVLC_PTS macros usb: gadget: udc-core: fix the typo of udc state attribute usb: gadget: f_phonet: remove unused preprocessor conditional usb: gadget: multi: fix error return code in cdc_do_config() USB: mos7840: fix pointer casts USB: mos7840: fix race in led handling USB: mos7840: fix device-type detection USB: mos7840: fix race in register handling USB: serial: add driver for Suunto ANT+ USB device usb: gadget: free opts struct on error recovery usb: gadget: ether: put_usb_function on unbind usb: musb: fix resource passed from glue layer to musb
generated by cgit (git 2.34.1) at 2025-07-15 18:19:21 +0000