summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-07-20gpio: ws16c48: Implement and utilize register structuresWilliam Breathitt Gray
Reduce magic numbers and improve code readability by implementing and utilizing named register data structures. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Paul Demetrotion <pdemetrotion@winsystems.com> Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpio: remove VR41XX related gpio driverThomas Bogendoerfer
Commit d3164e2f3b0a ("MIPS: Remove VR41xx support") removed support for MIPS VR41xx platform, so remove exclusive drivers for this platform, too. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19dt-bindings: gpio: add pull-disable flagNuno Sá
This extends the flags that can be used in GPIO specifiers to indicate that no bias is intended in the pin. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpiolib: acpi: support bias pull disableNuno Sá
On top of looking at PULL_UP and PULL_DOWN flags, also look at PULL_DISABLE and set the appropriate GPIO flag. The GPIO core will then pass down this to controllers that support it. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpiolib: of: support bias pull disableNuno Sá
On top of looking at PULL_UP and PULL_DOWN flags, also look at PULL_DISABLE and set the appropriate GPIO flag. The GPIO core will then pass down this to controllers that support it. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpiolib: add support for bias pull disableNuno Sá
This change prepares the gpio core to look at firmware flags and set 'FLAG_BIAS_DISABLE' if necessary. It works in similar way to 'GPIO_PULL_DOWN' and 'GPIO_PULL_UP'. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpio: 74xx-mmio: use bits.h macros for all masksAndy Shevchenko
Make use of the GENMASK() (far less error-prone, far more concise). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpio: 74xx-mmio: Check MMIO_74XX_DIR_IN flag in mmio_74xx_dir_in()Andy Shevchenko
It's logically better to check the IN in ->direction_input() and _OUT in ->direction_output(). While at it, replace ternary with plain if-conditional for the sake of consistency with mmio_74xx_dir_out(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpio: 74xx-mmio: Make use of device propertiesAndy Shevchenko
Convert the module to be property provider agnostic and allow it to be used on non-OF platforms. Add mod_devicetable.h include. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpiolib: cdev: compile out HTE unless CONFIG_HTE selectedKent Gibson
The majority of builds do not include HTE, so compile out hte functionality unless CONFIG_HTE is selected. Signed-off-by: Kent Gibson <warthog618@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpiolib: cdev: consolidate edge detector configuration flagsKent Gibson
Combine the polarity_change flag, struct line eflags, and hte enable flag into a single flag variable. The combination of these flags describes the configuration state of the edge detector, so formalize and clarify that by combining them into a single variable, edflags, in struct line. The edflags is a subset of the GPIO_V2_LINE_FLAGsb relevant to the edge detector, and is also a superset of the eflags it replaces. The eflags name is still used to describe the subset of edflags corresponding to the rising/falling edge flags where edflags is masked down to that subset. This consolidation reduces the number of variables being passed, simplifies state comparisons, and provides a more extensible foundation should additional edge sources be integrated in the future. Signed-off-by: Kent Gibson <warthog618@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpiolib: cdev: simplify line event identificationKent Gibson
Reorganise line event identification code to reduce code duplication, and replace if-else initializers with a helper function to improve readability. Signed-off-by: Kent Gibson <warthog618@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2022-07-19gpiolib: cdev: replace if-else chains with switchesKent Gibson
Improve readability by replacing if-else chains with switch statements. Signed-off-by: Kent Gibson <warthog618@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpiolib: cdev: simplify parameter in call to hte_edge_setupKent Gibson
Improve readability by using the GPIO_V2_LINE_FLAG_EDGE_BOTH instead of combining the rising and falling edge flags. Signed-off-by: Kent Gibson <warthog618@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Dipen Patel <dipenp@nvidia.com> Tested-by: Dipen Patel <dipenp@nvidia.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpiolib: cdev: simplify linereq_freeKent Gibson
The edge detector is only ever started after the line desc has been determined, so move edge_detector_stop() inside the line desc check, and merge the two checked regions into one. Signed-off-by: Kent Gibson <warthog618@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Dipen Patel <dipenp@nvidia.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpio: 104-idi-48: unsigned to unsigned int cleanupAakash Sen Sharma
Remove checkpatch warnings. No functional changes. Signed-off-by: Aakash Sen Sharma <aakashsensharma@gmail.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpio: GPIO_SAMA5D2_PIOBU should depend on ARCH_AT91Geert Uytterhoeven
The SAMA5D2 PIOBU is only present on some AT91/Microchip SoCs. Hence add a dependency on ARCH_AT91, to prevent asking the user about this driver when configuring a kernel without AT91/Microchip SoC support. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpio: gpiolib-of: Fix refcount bugs in of_mm_gpiochip_add_data()Liang He
We should use of_node_get() when a new reference of device_node is created. It is noted that the old reference stored in 'mm_gc->gc.of_node' should also be decreased. This patch is based on the fact that there is a call site in function 'qe_add_gpiochips()' of src file 'drivers\soc\fsl\qe\gpio.c'. In this function, of_mm_gpiochip_add_data() is contained in an iteration of for_each_compatible_node() which will automatically increase and decrease the refcount. So we need additional of_node_get() for the reference escape in of_mm_gpiochip_add_data(). Fixes: a19e3da5bc5f ("of/gpio: Kill of_gpio_chip and add members directly to gpio_chip") Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19dt-bindings: gpio: Convert TI TPIC2810 GPIO Controller bindings to YAMLAparna M
Convert gpio-tpic2810 bindings to yaml format and remove outdated bindings in .txt format. Signed-off-by: Aparna M <a-m1@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpio: lp3943: unsigned to unsigned int cleanupShinyzenith
Getting rid of checkpatch findings. No functional changes. Signed-off-by: Shinyzenith <aakashsensharma@gmail.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19Merge tag 'intel-gpio-v5.20-1' of ↵Bartosz Golaszewski
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into TEST_MERGE intel-gpio for v5.20-1 * Clean up the GPIO driver of Intel EG20 PCH The following is an automated git shortlog grouped by driver: pch: - Change PCI device macros - Use dev_err_probe()
2022-07-19gpiolib: of: Use device_match_of_node() helperAndy Shevchenko
Instead of open coding, use device_match_of_node() helper. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpio: adp5588: sort header inclusion alphabeticallyAndy Shevchenko
Sort header inclusion alphabetically. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpio: adp5588: Do not use defined value for driver name and compatibleAndy Shevchenko
It's wrong to use defined string literal for three semantically different cases, i.e.: 1) compatible string, which is part of ABI and has to have specific format; 2) I2C ID, which is user space visible and also ABI; 3) driver name, that can be changed. Drop the define and use appropriate string literals in place. While at it, drop comma at terminator entry of OF ID table. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpio: adp5588: Switch from of headers to mod_devicetable.hAndy Shevchenko
There is nothing directly using of specific interfaces in this driver, so lets not include the headers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpio: rockchip: add support for rk3588Jianqun Xu
Add V2.1 rockchip gpio controller type, which is part of the RK3588 SoC. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de>
2022-07-19dt-bindings: gpio: rockchip: add gpio-rangesSebastian Reichel
Allow usage of gpio-ranges with the rockchip gpio controller. The driver already had support for this since it has been added to the mainline kernel in the first place. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpio: adnp: Make use of device propertiesAndy Shevchenko
Convert the module to be property provider agnostic and allow it to be used on non-OF platforms. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpio: adnp: use simple i2c probe functionAndy Shevchenko
The i2c probe functions here don't use the id information provided in their second argument, so the single-parameter i2c probe function ("probe_new") can be used instead. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpio: pca9570: add pca9571 supportLucas Stach
The PCA9571 very similar to the PCA9570, it only differs in the number of GPIOs. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpio: pca9570: Add DT bindings for NXP PCA9571Lucas Stach
This patch adds device tree bindings for the NXP PCA9571, a 8-bit I2C GPIO expander. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpio: xgs-iproc: Drop if with an always false conditionUwe Kleine-König
The remove callback is only called after probe completed successfully. In this case platform_set_drvdata() was called with a non-NULL argument and so chip is never NULL. Also note that returning an error code from a remove callback doesn't result in the device staying bound. It's still removed and devm callbacks are called. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpio: brcmstb: Make .remove() obviously always return 0Uwe Kleine-König
priv cannot be NULL because brcmstb_gpio_probe() calls platform_set_drvdata() with a non-NULL argument, so the check for !priv can be dropped. Also remove the variable ret that is only used to hide a bit that in the end zero is returned. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpio: ucb1400: Remove platform setup and teardown supportUwe Kleine-König
There is no user of these callbacks. The motivation for this change is to stop returning an error code from the remove callback. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpio: twl4030: Don't return an error after WARN in .removeUwe Kleine-König
Returning a non-zero value in a platform driver's remove callback only results in an error message ("remove callback returned a non-zero value. This will be ignored.", see platform_remove()), and then the device is removed anyhow. As there was just a WARN_ON triggered, return 0 to drop the follow up warning. The latter output is hardly relevant after the big WARN splat. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpio: twl4030: Drop platform teardown callbackUwe Kleine-König
There is no machine providing a teardown callback, so drop the unused code. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19dt-bindings: gpio: renesas,rcar-gpio: R-Car V3U is R-Car Gen4Geert Uytterhoeven
Despite the name, R-Car V3U is the first member of the R-Car Gen4 family. Hence move its compatible value to the R-Car Gen4 section. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpio: davinci: Add support for system suspend/resume PMDevarsh Thakkar
Add support for system suspend/resume PM hooks, save the register context of all the required gpio registers on suspend and restore context on the resume. Signed-off-by: Devarsh Thakkar <devarsht@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19dt-bindings: gpio: gpio-mvebu: document offset and marvell,pwm-offsetChris Packham
The offset and marvell,pwm-offset properties weren't in the old binding. Add them based on the existing usage in the driver and board DTS when the marvell,armada-8k-gpio compatible is used. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19dt-bindings: gpio: gpio-mvebu: deprecate armadaxp-gpioChris Packham
Commit 5f79c651e81e ("arm: mvebu: use global interrupts for GPIOs on Armada XP") the marvell,armadaxp-gpio compatible obsolete. The driver code still exists to handle the armadaxp behaviour but all the in-tree boards use the marvell,armada-370-gpio. Document the marvell,armadaxp-gpio compatible as deprecated. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19dt-bindings: gpio: gpio-mvebu: convert txt binding to DT schema formatChris Packham
Convert the existing device tree binding to DT schema format. The old binding listed the interrupt-controller and related properties as required but there are sufficiently many existing usages without it that the YAML binding does not make the interrupt properties required. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpiolib: devres: Get rid of unused devm_gpio_free()Andy Shevchenko
The last user, which in fact was a dead code, has gone a year ago, previous one 3 years ago. On top of that we want to drop away the legacy GPIO APIs in the kernel, so take a chance to get rid of unused devm_gpio_free() and accompanying stuff. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-17Linux 5.19-rc7Linus Torvalds
2022-07-17Merge tag 'drm-intel-fixes-2022-07-17' of ↵Linus Torvalds
git://anongit.freedesktop.org/drm/drm-intel Pull intel drm build fix from Rodrigo Vivi: "Our 'dim' flow has a problem with fixes of fixes getting missed. We need to take a look on that later. Meanwhile, please allow me to quickly propagate this fix for the 32-bit build issue here upstream" * tag 'drm-intel-fixes-2022-07-17' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915/ttm: fix 32b build
2022-07-17Merge tag 'perf-tools-fixes-for-v5.19-2022-07-17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix SIGSEGV when processing syscall args in perf.data files in 'perf trace' - Sync kvm, msr-index and cpufeatures headers with the kernel sources - Fix 'convert perf time to TSC' 'perf test': - No need to open events twice - Fix finding correct event on hybrid systems * tag 'perf-tools-fixes-for-v5.19-2022-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf trace: Fix SIGSEGV when processing syscall args perf tests: Fix Convert perf time to TSC test for hybrid perf tests: Stop Convert perf time to TSC test opening events twice tools arch x86: Sync the msr-index.h copy with the kernel sources tools headers cpufeatures: Sync with the kernel sources tools headers UAPI: Sync linux/kvm.h with the kernel sources
2022-07-17drm/i915/ttm: fix 32b buildMatthew Auld
Since segment_pages is no longer a compile time constant, it looks the DIV_ROUND_UP(node->size, segment_pages) breaks the 32b build. Simplest is just to use the ULL variant, but really we should need not need more than u32 for the page alignment (also we are limited by that due to the sg->length type), so also make it all u32. Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: aff1e0b09b54 ("drm/i915/ttm: fix sg_table construction") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Nirmoy Das <nirmoy.das@linux.intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220712174050.592550-1-matthew.auld@intel.com (cherry picked from commit 9306b2b2dfce6931241ef804783692cee526599c) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-07-17Merge tag 'perf_urgent_for_v5.19_rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fix from Borislav Petkov: - A single data race fix on the perf event cleanup path to avoid endless loops due to insufficient locking * tag 'perf_urgent_for_v5.19_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix data race between perf_event_set_output() and perf_mmap_close()
2022-07-17Merge tag 'x86_urgent_for_v5.19_rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Improve the check whether the kernel supports WP mappings so that it can accomodate a XenPV guest due to how the latter is setting up the PAT machinery - Now that the retbleed nightmare is public, here's the first round of fallout fixes: * Fix a build failure on 32-bit due to missing include * Remove an untraining point in espfix64 return path * other small cleanups * tag 'x86_urgent_for_v5.19_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/bugs: Remove apostrophe typo um: Add missing apply_returns() x86/entry: Remove UNTRAIN_RET from native_irq_return_ldt x86/bugs: Mark retbleed_strings static x86/pat: Fix x86_has_pat_wp() x86/asm/32: Fix ANNOTATE_UNRET_SAFE use on 32-bit
2022-07-17Merge tag 'gpio-fixes-for-v5.19-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fix from Bartosz Golaszewski: - fix a configfs attribute of the gpio-sim module * tag 'gpio-fixes-for-v5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: sim: fix the chip_name configfs item
2022-07-17Merge tag 'input-for-v5.19-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - fix Goodix driver to properly behave on the Aya Neo Next - some more sanity checks in usbtouchscreen driver - a tweak in wm97xx driver in preparation for remove() to return void - a clarification in input core regarding units of measurement for resolution on touch events. * tag 'input-for-v5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: document the units for resolution of size axes Input: goodix - call acpi_device_fix_up_power() in some cases Input: wm97xx - make .remove() obviously always return 0 Input: usbtouchscreen - add driver_info sanity check
generated by cgit (git 2.34.1) at 2025-07-15 09:48:49 +0000