summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-09-06LoongArch: Drop unused parse_r and parse_v macrosNathan Chancellor
When building with CONFIG_LTO_CLANG_FULL, there are several errors due to the way that parse_r is defined with an __asm__ statement in a header: ld.lld: error: ld-temp.o <inline asm>:105:1: macro 'parse_r' is already defined .macro parse_r var r ^ This was an issue for arch/mips as well, which was resolved by commit 67512a8cf5a7 ("MIPS: Avoid macro redefinitions"). However, parse_r is unused in arch/loongarch after commit 83d8b38967d2 ("LoongArch: Simplify the invtlb wrappers"), so doing the same change does not make much sense now. Just remove parse_r (and parse_v, which is also unused) to resolve the redefinition error. If it needs to be brought back due to an actual use, it should be brought back with the same changes as the aforementioned arch/mips commit. Closes: https://github.com/ClangBuiltLinux/linux/issues/1924 Reviewed-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06drbd: swap bvec_set_page len and offsetChristoph Böhmwalder
bvec_set_page has the following signature: static inline void bvec_set_page(struct bio_vec *bv, struct page *page, unsigned int len, unsigned int offset) However, the usage in DRBD swaps the len and offset parameters. This leads to a bvec with length=0 instead of the intended length=4096, which causes sock_sendmsg to return -EIO. This leaves DRBD unable to transmit any pages and thus completely broken. Swapping the parameters fixes the regression. Fixes: eeac7405c735 ("drbd: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage()") Reported-by: Serguei Ivantsov <manowar@gsc-game.com> Link: https://lore.kernel.org/regressions/CAKH+VT3YLmAn0Y8=q37UTDShqxDLsqPcQ4hBMzY7HPn7zNx+RQ@mail.gmail.com/ Cc: stable@vger.kernel.org Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20230906133034.948817-1-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-09-06block: fix pin count management when merging same-page segmentsChristoph Hellwig
There is no need to unpin the added page when adding it to the bio fails as that is done by the loop below. Instead we want to unpin it when adding a single page to the bio more than once as bio_release_pages will only unpin it once. Fixes: d1916c86ccdc ("block: move same page handling from __bio_add_pc_page to the callers") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20230905124731.328255-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-09-06bpf, riscv: use prog pack allocator in the BPF JITPuranjay Mohan
Use bpf_jit_binary_pack_alloc() for memory management of JIT binaries in RISCV BPF JIT. The bpf_jit_binary_pack_alloc creates a pair of RW and RX buffers. The JIT writes the program into the RW buffer. When the JIT is done, the program is copied to the final RX buffer with bpf_jit_binary_pack_finalize. Implement bpf_arch_text_copy() and bpf_arch_text_invalidate() for RISCV JIT as these functions are required by bpf_jit_binary_pack allocator. Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> Reviewed-by: Song Liu <song@kernel.org> Reviewed-by: Pu Lehui <pulehui@huawei.com> Acked-by: Björn Töpel <bjorn@kernel.org> Tested-by: Björn Töpel <bjorn@rivosinc.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/20230831131229.497941-5-puranjay12@gmail.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-06riscv: implement a memset like function for textPuranjay Mohan
The BPF JIT needs to write invalid instructions to RX regions of memory to invalidate removed BPF programs. This needs a function like memset() that can work with RX memory. Implement patch_text_set_nosync() which is similar to text_poke_set() of x86. Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> Reviewed-by: Pu Lehui <pulehui@huawei.com> Acked-by: Björn Töpel <bjorn@kernel.org> Tested-by: Björn Töpel <bjorn@rivosinc.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/20230831131229.497941-4-puranjay12@gmail.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-06riscv: extend patch_text_nosync() for multiple pagesPuranjay Mohan
The patch_insn_write() function currently doesn't work for multiple pages of instructions, therefore patch_text_nosync() will fail with a page fault if called with lengths spanning multiple pages. This commit extends the patch_insn_write() function to support multiple pages by copying at max 2 pages at a time in a loop. This implementation is similar to text_poke_copy() function of x86. Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> Reviewed-by: Pu Lehui <pulehui@huawei.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Tested-by: Björn Töpel <bjorn@rivosinc.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/20230831131229.497941-3-puranjay12@gmail.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-06bpf: make bpf_prog_pack allocator portablePuranjay Mohan
The bpf_prog_pack allocator currently uses module_alloc() and module_memfree() to allocate and free memory. This is not portable because different architectures use different methods for allocating memory for BPF programs. Like ARM64 and riscv use vmalloc()/vfree(). Use bpf_jit_alloc_exec() and bpf_jit_free_exec() for memory management in bpf_prog_pack allocator. Other architectures can override these with their implementation and will be able to use bpf_prog_pack directly. On architectures that don't override bpf_jit_alloc/free_exec() this is basically a NOP. Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> Acked-by: Song Liu <song@kernel.org> Acked-by: Björn Töpel <bjorn@kernel.org> Tested-by: Björn Töpel <bjorn@rivosinc.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/20230831131229.497941-2-puranjay12@gmail.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-06selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_allocMartin KaFai Lau
This patch checks the sk_omem_alloc has been uncharged by bpf_sk_storage during the __sk_destruct. Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230901231129.578493-4-martin.lau@linux.dev
2023-09-06bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_allocMartin KaFai Lau
The commit c83597fa5dc6 ("bpf: Refactor some inode/task/sk storage functions for reuse"), refactored the bpf_{sk,task,inode}_storage_free() into bpf_local_storage_unlink_nolock() which then later renamed to bpf_local_storage_destroy(). The commit accidentally passed the "bool uncharge_mem = false" argument to bpf_selem_unlink_storage_nolock() which then stopped the uncharge from happening to the sk->sk_omem_alloc. This missing uncharge only happens when the sk is going away (during __sk_destruct). This patch fixes it by always passing "uncharge_mem = true". It is a noop to the task/inode/cgroup storage because they do not have the map_local_storage_(un)charge enabled in the map_ops. A followup patch will be done in bpf-next to remove the uncharge_mem argument. A selftest is added in the next patch. Fixes: c83597fa5dc6 ("bpf: Refactor some inode/task/sk storage functions for reuse") Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230901231129.578493-3-martin.lau@linux.dev
2023-09-06bpf: bpf_sk_storage: Fix invalid wait context lockdep reportMartin KaFai Lau
'./test_progs -t test_local_storage' reported a splat: [ 27.137569] ============================= [ 27.138122] [ BUG: Invalid wait context ] [ 27.138650] 6.5.0-03980-gd11ae1b16b0a #247 Tainted: G O [ 27.139542] ----------------------------- [ 27.140106] test_progs/1729 is trying to lock: [ 27.140713] ffff8883ef047b88 (stock_lock){-.-.}-{3:3}, at: local_lock_acquire+0x9/0x130 [ 27.141834] other info that might help us debug this: [ 27.142437] context-{5:5} [ 27.142856] 2 locks held by test_progs/1729: [ 27.143352] #0: ffffffff84bcd9c0 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire+0x4/0x40 [ 27.144492] #1: ffff888107deb2c0 (&storage->lock){..-.}-{2:2}, at: bpf_local_storage_update+0x39e/0x8e0 [ 27.145855] stack backtrace: [ 27.146274] CPU: 0 PID: 1729 Comm: test_progs Tainted: G O 6.5.0-03980-gd11ae1b16b0a #247 [ 27.147550] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 27.149127] Call Trace: [ 27.149490] <TASK> [ 27.149867] dump_stack_lvl+0x130/0x1d0 [ 27.152609] dump_stack+0x14/0x20 [ 27.153131] __lock_acquire+0x1657/0x2220 [ 27.153677] lock_acquire+0x1b8/0x510 [ 27.157908] local_lock_acquire+0x29/0x130 [ 27.159048] obj_cgroup_charge+0xf4/0x3c0 [ 27.160794] slab_pre_alloc_hook+0x28e/0x2b0 [ 27.161931] __kmem_cache_alloc_node+0x51/0x210 [ 27.163557] __kmalloc+0xaa/0x210 [ 27.164593] bpf_map_kzalloc+0xbc/0x170 [ 27.165147] bpf_selem_alloc+0x130/0x510 [ 27.166295] bpf_local_storage_update+0x5aa/0x8e0 [ 27.167042] bpf_fd_sk_storage_update_elem+0xdb/0x1a0 [ 27.169199] bpf_map_update_value+0x415/0x4f0 [ 27.169871] map_update_elem+0x413/0x550 [ 27.170330] __sys_bpf+0x5e9/0x640 [ 27.174065] __x64_sys_bpf+0x80/0x90 [ 27.174568] do_syscall_64+0x48/0xa0 [ 27.175201] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 27.175932] RIP: 0033:0x7effb40e41ad [ 27.176357] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d8 [ 27.179028] RSP: 002b:00007ffe64c21fc8 EFLAGS: 00000202 ORIG_RAX: 0000000000000141 [ 27.180088] RAX: ffffffffffffffda RBX: 00007ffe64c22768 RCX: 00007effb40e41ad [ 27.181082] RDX: 0000000000000020 RSI: 00007ffe64c22008 RDI: 0000000000000002 [ 27.182030] RBP: 00007ffe64c21ff0 R08: 0000000000000000 R09: 00007ffe64c22788 [ 27.183038] R10: 0000000000000064 R11: 0000000000000202 R12: 0000000000000000 [ 27.184006] R13: 00007ffe64c22788 R14: 00007effb42a1000 R15: 0000000000000000 [ 27.184958] </TASK> It complains about acquiring a local_lock while holding a raw_spin_lock. It means it should not allocate memory while holding a raw_spin_lock since it is not safe for RT. raw_spin_lock is needed because bpf_local_storage supports tracing context. In particular for task local storage, it is easy to get a "current" task PTR_TO_BTF_ID in tracing bpf prog. However, task (and cgroup) local storage has already been moved to bpf mem allocator which can be used after raw_spin_lock. The splat is for the sk storage. For sk (and inode) storage, it has not been moved to bpf mem allocator. Using raw_spin_lock or not, kzalloc(GFP_ATOMIC) could theoretically be unsafe in tracing context. However, the local storage helper requires a verifier accepted sk pointer (PTR_TO_BTF_ID), it is hypothetical if that (mean running a bpf prog in a kzalloc unsafe context and also able to hold a verifier accepted sk pointer) could happen. This patch avoids kzalloc after raw_spin_lock to silent the splat. There is an existing kzalloc before the raw_spin_lock. At that point, a kzalloc is very likely required because a lookup has just been done before. Thus, this patch always does the kzalloc before acquiring the raw_spin_lock and remove the later kzalloc usage after the raw_spin_lock. After this change, it will have a charge and then uncharge during the syscall bpf_map_update_elem() code path. This patch opts for simplicity and not continue the old optimization to save one charge and uncharge. This issue is dated back to the very first commit of bpf_sk_storage which had been refactored multiple times to create task, inode, and cgroup storage. This patch uses a Fixes tag with a more recent commit that should be easier to do backport. Fixes: b00fa38a9c1c ("bpf: Enable non-atomic allocations in local storage") Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230901231129.578493-2-martin.lau@linux.dev
2023-09-06s390/bpf: Pass through tail call counter in trampolinesIlya Leoshkevich
s390x eBPF programs use the following extension to the s390x calling convention: tail call counter is passed on stack at offset STK_OFF_TCCNT, which callees otherwise use as scratch space. Currently trampoline does not respect this and clobbers tail call counter. This breaks enforcing tail call limits in eBPF programs, which have trampolines attached to them. Fix by forwarding a copy of the tail call counter to the original eBPF program in the trampoline (for fexit), and by restoring it at the end of the trampoline (for fentry). Fixes: 528eb2cb87bc ("s390/bpf: Implement arch_prepare_bpf_trampoline()") Reported-by: Leon Hwang <hffilwlqm@gmail.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230906004448.111674-1-iii@linux.ibm.com
2023-09-06bpf: Assign bpf_tramp_run_ctx::saved_run_ctx before recursion check.Sebastian Andrzej Siewior
__bpf_prog_enter_recur() assigns bpf_tramp_run_ctx::saved_run_ctx before performing the recursion check which means in case of a recursion __bpf_prog_exit_recur() uses the previously set bpf_tramp_run_ctx::saved_run_ctx value. __bpf_prog_enter_sleepable_recur() assigns bpf_tramp_run_ctx::saved_run_ctx after the recursion check which means in case of a recursion __bpf_prog_exit_sleepable_recur() uses an uninitialized value. This does not look right. If I read the entry trampoline code right, then bpf_tramp_run_ctx isn't initialized upfront. Align __bpf_prog_enter_sleepable_recur() with __bpf_prog_enter_recur() and set bpf_tramp_run_ctx::saved_run_ctx before the recursion check is made. Remove the assignment of saved_run_ctx in kern_sys_bpf() since it happens a few cycles later. Fixes: e384c7b7b46d0 ("bpf, x86: Create bpf_tramp_run_ctx on the caller thread's stack") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/bpf/20230830080405.251926-3-bigeasy@linutronix.de
2023-09-06bpf: Invoke __bpf_prog_exit_sleepable_recur() on recursion in kern_sys_bpf().Sebastian Andrzej Siewior
If __bpf_prog_enter_sleepable_recur() detects recursion then it returns 0 without undoing rcu_read_lock_trace(), migrate_disable() or decrementing the recursion counter. This is fine in the JIT case because the JIT code will jump in the 0 case to the end and invoke the matching exit trampoline (__bpf_prog_exit_sleepable_recur()). This is not the case in kern_sys_bpf() which returns directly to the caller with an error code. Add __bpf_prog_exit_sleepable_recur() as clean up in the recursion case. Fixes: b1d18a7574d0d ("bpf: Extend sys_bpf commands for bpf_syscall programs.") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/bpf/20230830080405.251926-2-bigeasy@linutronix.de
2023-09-06net: phylink: fix sphinx complaint about invalid literalJakub Kicinski
sphinx complains about the use of "%PHYLINK_PCS_NEG_*": Documentation/networking/kapi:144: ./include/linux/phylink.h:601: WARNING: Inline literal start-string without end-string. Documentation/networking/kapi:144: ./include/linux/phylink.h:633: WARNING: Inline literal start-string without end-string. These are not valid symbols so drop the '%' prefix. Alternatively we could use %PHYLINK_PCS_NEG_\* (escape the *) or use normal literal ``PHYLINK_PCS_NEG_*`` but there is already a handful of un-adorned DEFINE_* in this file. Fixes: f99d471afa03 ("net: phylink: add PCS negotiation mode") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/all/20230626162908.2f149f98@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-06Merge branch 'sja1105-fixes'David S. Miller
Vladimir Oltean says: ==================== tc-cbs offload fixes for SJA1105 DSA Yanan Yang has pointed out to me that certain tc-cbs offloaded configurations do not appear to do any shaping on the LS1021A-TSN board (SJA1105T). This is due to an apparent documentation error that also made its way into the driver, which patch 1/3 now fixes. While investigating and then testing, I've found 2 more bugs, which are patches 2/3 and 3/3. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-06net: dsa: sja1105: complete tc-cbs offload support on SJA1110Vladimir Oltean
The blamed commit left this delta behind: struct sja1105_cbs_entry { - u64 port; - u64 prio; + u64 port; /* Not used for SJA1110 */ + u64 prio; /* Not used for SJA1110 */ u64 credit_hi; u64 credit_lo; u64 send_slope; u64 idle_slope; }; but did not actually implement tc-cbs offload fully for the new switch. The offload is accepted, but it doesn't work. The difference compared to earlier switch generations is that now, the table of CBS shapers is sparse, because there are many more shapers, so the mapping between a {port, prio} and a table index is static, rather than requiring us to store the port and prio into the sja1105_cbs_entry. So, the problem is that the code programs the CBS shaper parameters at a dynamic table index which is incorrect. All that needs to be done for SJA1110 CBS shapers to work is to bypass the logic which allocates shapers in a dense manner, as for SJA1105, and use the fixed mapping instead. Fixes: 3e77e59bf8cf ("net: dsa: sja1105: add support for the SJA1110 switch family") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-06net: dsa: sja1105: fix -ENOSPC when replacing the same tc-cbs too many timesVladimir Oltean
After running command [2] too many times in a row: [1] $ tc qdisc add dev sw2p0 root handle 1: mqprio num_tc 8 \ map 0 1 2 3 4 5 6 7 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 [2] $ tc qdisc replace dev sw2p0 parent 1:1 cbs offload 1 \ idleslope 120000 sendslope -880000 locredit -1320 hicredit 180 (aka more than priv->info->num_cbs_shapers times) we start seeing the following error message: Error: Specified device failed to setup cbs hardware offload. This comes from the fact that ndo_setup_tc(TC_SETUP_QDISC_CBS) presents the same API for the qdisc create and replace cases, and the sja1105 driver fails to distinguish between the 2. Thus, it always thinks that it must allocate the same shaper for a {port, queue} pair, when it may instead have to replace an existing one. Fixes: 4d7525085a9b ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-06net: dsa: sja1105: fix bandwidth discrepancy between tc-cbs software and offloadVladimir Oltean
More careful measurement of the tc-cbs bandwidth shows that the stream bandwidth (effectively idleslope) increases, there is a larger and larger discrepancy between the rate limit obtained by the software Qdisc, and the rate limit obtained by its offloaded counterpart. The discrepancy becomes so large, that e.g. at an idleslope of 40000 (40Mbps), the offloaded cbs does not actually rate limit anything, and traffic will pass at line rate through a 100 Mbps port. The reason for the discrepancy is that the hardware documentation I've been following is incorrect. UM11040.pdf (for SJA1105P/Q/R/S) states about IDLE_SLOPE that it is "the rate (in unit of bytes/sec) at which the credit counter is increased". Cross-checking with UM10944.pdf (for SJA1105E/T) and UM11107.pdf (for SJA1110), the wording is different: "This field specifies the value, in bytes per second times link speed, by which the credit counter is increased". So there's an extra scaling for link speed that the driver is currently not accounting for, and apparently (empirically), that link speed is expressed in Kbps. I've pondered whether to pollute the sja1105_mac_link_up() implementation with CBS shaper reprogramming, but I don't think it is worth it. IMO, the UAPI exposed by tc-cbs requires user space to recalculate the sendslope anyway, since the formula for that depends on port_transmit_rate (see man tc-cbs), which is not an invariant from tc's perspective. So we use the offload->sendslope and offload->idleslope to deduce the original port_transmit_rate from the CBS formula, and use that value to scale the offload->sendslope and offload->idleslope to values that the hardware understands. Some numerical data points: 40Mbps stream, max interfering frame size 1500, port speed 100M --------------------------------------------------------------- tc-cbs parameters: idleslope 40000 sendslope -60000 locredit -900 hicredit 600 which result in hardware values: Before (doesn't work) After (works) credit_hi 600 600 credit_lo 900 900 send_slope 7500000 75 idle_slope 5000000 50 40Mbps stream, max interfering frame size 1500, port speed 1G ------------------------------------------------------------- tc-cbs parameters: idleslope 40000 sendslope -960000 locredit -1440 hicredit 60 which result in hardware values: Before (doesn't work) After (works) credit_hi 60 60 credit_lo 1440 1440 send_slope 120000000 120 idle_slope 5000000 5 5.12Mbps stream, max interfering frame size 1522, port speed 100M ----------------------------------------------------------------- tc-cbs parameters: idleslope 5120 sendslope -94880 locredit -1444 hicredit 77 which result in hardware values: Before (doesn't work) After (works) credit_hi 77 77 credit_lo 1444 1444 send_slope 11860000 118 idle_slope 640000 6 Tested on SJA1105T, SJA1105S and SJA1110A, at 1Gbps and 100Mbps. Fixes: 4d7525085a9b ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc") Reported-by: Yanan Yang <yanan.yang@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-06Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Change MIN_TXD and MIN_RXD to allow set rx/tx value between 64 and 80 Olga Zaborska says: Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx value between 64 and 80. All igb, igbvf and igc devices can use as low as 64 descriptors. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-06mlx5/core: E-Switch, Create ACL FT for eswitch manager in switchdev modeBodong Wang
ACL flow table is required in switchdev mode when metadata is enabled, driver creates such table when loading each vport. However, not every vport is loaded in switchdev mode. Such as ECPF if it's the eswitch manager. In this case, ACL flow table is still needed. To make it modularized, create ACL flow table for eswitch manager as default and skip such operations when loading manager vport. Also, there is no need to load the eswitch manager vport in switchdev mode. This means there is no need to load it on regular connect-x HCAs where the PF is the eswitch manager. This will avoid creating duplicate ACL flow table for host PF vport. Fixes: 29bcb6e4fe70 ("net/mlx5e: E-Switch, Use metadata for vport matching in send-to-vport rules") Fixes: eb8e9fae0a22 ("mlx5/core: E-Switch, Allocate ECPF vport if it's an eswitch manager") Fixes: 5019833d661f ("net/mlx5: E-switch, Introduce helper function to enable/disable vports") Signed-off-by: Bodong Wang <bodong@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-06net/mlx5e: Clear mirred devices array if the rule is splitJianbo Liu
In the cited commit, the mirred devices are recorded and checked while parsing the actions. In order to avoid system crash, the duplicate action in a single rule is not allowed. But the rule is actually break down into several FTEs in different tables, for either mirroring, or the specified types of actions which use post action infrastructure. It will reject certain action list by mistake, for example: actions:enp8s0f0_1,set(ipv4(ttl=63)),enp8s0f0_0,enp8s0f0_1. Here the rule is split to two FTEs because of pedit action. To fix this issue, when parsing the rule actions, reset if_count to clear the mirred devices array if the rule is split to multiple FTEs, and then the duplicate checking is restarted. Fixes: 554fe75c1b3f ("net/mlx5e: Avoid duplicating rule destinations") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-06ip_tunnels: use DEV_STATS_INC()Eric Dumazet
syzbot/KCSAN reported data-races in iptunnel_xmit_stats() [1] This can run from multiple cpus without mutual exclusion. Adopt SMP safe DEV_STATS_INC() to update dev->stats fields. [1] BUG: KCSAN: data-race in iptunnel_xmit / iptunnel_xmit read-write to 0xffff8881353df170 of 8 bytes by task 30263 on cpu 1: iptunnel_xmit_stats include/net/ip_tunnels.h:493 [inline] iptunnel_xmit+0x432/0x4a0 net/ipv4/ip_tunnel_core.c:87 ip_tunnel_xmit+0x1477/0x1750 net/ipv4/ip_tunnel.c:831 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:662 __netdev_start_xmit include/linux/netdevice.h:4889 [inline] netdev_start_xmit include/linux/netdevice.h:4903 [inline] xmit_one net/core/dev.c:3544 [inline] dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3560 __dev_queue_xmit+0xeee/0x1de0 net/core/dev.c:4340 dev_queue_xmit include/linux/netdevice.h:3082 [inline] __bpf_tx_skb net/core/filter.c:2129 [inline] __bpf_redirect_no_mac net/core/filter.c:2159 [inline] __bpf_redirect+0x723/0x9c0 net/core/filter.c:2182 ____bpf_clone_redirect net/core/filter.c:2453 [inline] bpf_clone_redirect+0x16c/0x1d0 net/core/filter.c:2425 ___bpf_prog_run+0xd7d/0x41e0 kernel/bpf/core.c:1954 __bpf_prog_run512+0x74/0xa0 kernel/bpf/core.c:2195 bpf_dispatcher_nop_func include/linux/bpf.h:1181 [inline] __bpf_prog_run include/linux/filter.h:609 [inline] bpf_prog_run include/linux/filter.h:616 [inline] bpf_test_run+0x15d/0x3d0 net/bpf/test_run.c:423 bpf_prog_test_run_skb+0x77b/0xa00 net/bpf/test_run.c:1045 bpf_prog_test_run+0x265/0x3d0 kernel/bpf/syscall.c:3996 __sys_bpf+0x3af/0x780 kernel/bpf/syscall.c:5353 __do_sys_bpf kernel/bpf/syscall.c:5439 [inline] __se_sys_bpf kernel/bpf/syscall.c:5437 [inline] __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5437 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read-write to 0xffff8881353df170 of 8 bytes by task 30249 on cpu 0: iptunnel_xmit_stats include/net/ip_tunnels.h:493 [inline] iptunnel_xmit+0x432/0x4a0 net/ipv4/ip_tunnel_core.c:87 ip_tunnel_xmit+0x1477/0x1750 net/ipv4/ip_tunnel.c:831 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:662 __netdev_start_xmit include/linux/netdevice.h:4889 [inline] netdev_start_xmit include/linux/netdevice.h:4903 [inline] xmit_one net/core/dev.c:3544 [inline] dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3560 __dev_queue_xmit+0xeee/0x1de0 net/core/dev.c:4340 dev_queue_xmit include/linux/netdevice.h:3082 [inline] __bpf_tx_skb net/core/filter.c:2129 [inline] __bpf_redirect_no_mac net/core/filter.c:2159 [inline] __bpf_redirect+0x723/0x9c0 net/core/filter.c:2182 ____bpf_clone_redirect net/core/filter.c:2453 [inline] bpf_clone_redirect+0x16c/0x1d0 net/core/filter.c:2425 ___bpf_prog_run+0xd7d/0x41e0 kernel/bpf/core.c:1954 __bpf_prog_run512+0x74/0xa0 kernel/bpf/core.c:2195 bpf_dispatcher_nop_func include/linux/bpf.h:1181 [inline] __bpf_prog_run include/linux/filter.h:609 [inline] bpf_prog_run include/linux/filter.h:616 [inline] bpf_test_run+0x15d/0x3d0 net/bpf/test_run.c:423 bpf_prog_test_run_skb+0x77b/0xa00 net/bpf/test_run.c:1045 bpf_prog_test_run+0x265/0x3d0 kernel/bpf/syscall.c:3996 __sys_bpf+0x3af/0x780 kernel/bpf/syscall.c:5353 __do_sys_bpf kernel/bpf/syscall.c:5439 [inline] __se_sys_bpf kernel/bpf/syscall.c:5437 [inline] __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5437 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x0000000000018830 -> 0x0000000000018831 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 30249 Comm: syz-executor.4 Not tainted 6.5.0-syzkaller-11704-g3f86ed6ec0b3 #0 Fixes: 039f50629b7f ("ip_tunnel: Move stats update to iptunnel_xmit()") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-06net: team: do not use dynamic lockdep keyTaehee Yoo
team interface has used a dynamic lockdep key to avoid false-positive lockdep deadlock detection. Virtual interfaces such as team usually have their own lock for protecting private data. These interfaces can be nested. team0 | team1 Each interface's lock is actually different(team0->lock and team1->lock). So, mutex_lock(&team0->lock); mutex_lock(&team1->lock); mutex_unlock(&team1->lock); mutex_unlock(&team0->lock); The above case is absolutely safe. But lockdep warns about deadlock. Because the lockdep understands these two locks are same. This is a false-positive lockdep warning. So, in order to avoid this problem, the team interfaces started to use dynamic lockdep key. The false-positive problem was fixed, but it introduced a new problem. When the new team virtual interface is created, it registers a dynamic lockdep key(creates dynamic lockdep key) and uses it. But there is the limitation of the number of lockdep keys. So, If so many team interfaces are created, it consumes all lockdep keys. Then, the lockdep stops to work and warns about it. In order to fix this problem, team interfaces use the subclass instead of the dynamic key. So, when a new team interface is created, it doesn't register(create) a new lockdep, but uses existed subclass key instead. It is already used by the bonding interface for a similar case. As the bonding interface does, the subclass variable is the same as the 'dev->nested_level'. This variable indicates the depth in the stacked interface graph. The 'dev->nested_level' is protected by RTNL and RCU. So, 'mutex_lock_nested()' for 'team->lock' requires RTNL or RCU. In the current code, 'team->lock' is usually acquired under RTNL, there is no problem with using 'dev->nested_level'. The 'team_nl_team_get()' and The 'lb_stats_refresh()' functions acquire 'team->lock' without RTNL. But these don't iterate their own ports nested so they don't need nested lock. Reproducer: for i in {0..1000} do ip link add team$i type team ip link add dummy$i master team$i type dummy ip link set dummy$i up ip link set team$i up done Splat looks like: BUG: MAX_LOCKDEP_ENTRIES too low! turning off the locking correctness validator. Please attach the output of /proc/lock_stat to the bug report CPU: 0 PID: 4104 Comm: ip Not tainted 6.5.0-rc7+ #45 Call Trace: <TASK> dump_stack_lvl+0x64/0xb0 add_lock_to_list+0x30d/0x5e0 check_prev_add+0x73a/0x23a0 ... sock_def_readable+0xfe/0x4f0 netlink_broadcast+0x76b/0xac0 nlmsg_notify+0x69/0x1d0 dev_open+0xed/0x130 ... Reported-by: syzbot+9bbbacfbf1e04d5221f7@syzkaller.appspotmail.com Fixes: 369f61bee0f5 ("team: fix nested locking lockdep warning") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-06net/ipv6: SKB symmetric hash should incorporate transport portsQuan Tian
__skb_get_hash_symmetric() was added to compute a symmetric hash over the protocol, addresses and transport ports, by commit eb70db875671 ("packet: Use symmetric hash for PACKET_FANOUT_HASH."). It uses flow_keys_dissector_symmetric_keys as the flow_dissector to incorporate IPv4 addresses, IPv6 addresses and ports. However, it should not specify the flag as FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL, which stops further dissection when an IPv6 flow label is encountered, making transport ports not being incorporated in such case. As a consequence, the symmetric hash is based on 5-tuple for IPv4 but 3-tuple for IPv6 when flow label is present. It caused a few problems, e.g. when nft symhash and openvswitch l4_sym rely on the symmetric hash to perform load balancing as different L4 flows between two given IPv6 addresses would always get the same symmetric hash, leading to uneven traffic distribution. Removing the use of FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL makes sure the symmetric hash is based on 5-tuple for both IPv4 and IPv6 consistently. Fixes: eb70db875671 ("packet: Use symmetric hash for PACKET_FANOUT_HASH.") Reported-by: Lars Ekman <uablrek@gmail.com> Closes: https://github.com/antrea-io/antrea/issues/5457 Signed-off-by: Quan Tian <qtian@vmware.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-05riscv: libstub: Implement KASLR by using generic functionsAlexandre Ghiti
We can now use arm64 functions to handle the move of the kernel physical mapping: if KASLR is enabled, we will try to get a random seed from the firmware, if not possible, the kernel will be moved to a location that suits its alignment constraints. Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Song Shuai <songshuaishuai@tinylab.org> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Tested-by: Sami Tolvanen <samitolvanen@google.com> Link: https://lore.kernel.org/r/20230722123850.634544-6-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-05libstub: Fix compilation warning for rv32Alexandre Ghiti
Fix the following warning which appears when compiled for rv32 by using unsigned long type instead of u64. ../drivers/firmware/efi/libstub/efi-stub-helper.c: In function 'efi_kaslr_relocate_kernel': ../drivers/firmware/efi/libstub/efi-stub-helper.c:846:28: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 846 | (u64)_end < EFI_ALLOC_LIMIT) { Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Song Shuai <songshuaishuai@tinylab.org> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Tested-by: Sami Tolvanen <samitolvanen@google.com> Link: https://lore.kernel.org/r/20230722123850.634544-5-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-05arm64: libstub: Move KASLR handling functions to kaslr.cAlexandre Ghiti
This prepares for riscv to use the same functions to handle the pĥysical kernel move when KASLR is enabled. Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Song Shuai <songshuaishuai@tinylab.org> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Tested-by: Sami Tolvanen <samitolvanen@google.com> Link: https://lore.kernel.org/r/20230722123850.634544-4-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-05riscv: Dump out kernel offset information on panicAlexandre Ghiti
Dump out the KASLR virtual kernel offset when panic to help debug kernel. Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Song Shuai <songshuaishuai@tinylab.org> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Tested-by: Sami Tolvanen <samitolvanen@google.com> Link: https://lore.kernel.org/r/20230722123850.634544-3-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-05riscv: Introduce virtual kernel mapping KASLRAlexandre Ghiti
KASLR implementation relies on a relocatable kernel so that we can move the kernel mapping. The seed needed to virtually move the kernel is taken from the device tree, so we rely on the bootloader to provide a correct seed. Zkr could be used unconditionnally instead if implemented, but that's for another patch. Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Song Shuai <songshuaishuai@tinylab.org> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Tested-by: Sami Tolvanen <samitolvanen@google.com> Link: https://lore.kernel.org/r/20230722123850.634544-2-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-06dt-bindings: rtc: ds3231: Remove text bindingFabio Estevam
The "maxim,ds3231" compatible is described in the rtc-ds1307.yaml, so there is no need to keep the text bindings version. Remove the maxim,ds3231.txt file in favor of the rtc-ds1307.yaml binding. Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230902134407.2589099-1-festevam@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-09-06rtc: wm8350: remove unnecessary messagesAlexandre Belloni
The RTC core already prints a message when the RTC is registered and when registering fails, it is not necessary to have more in the driver. Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230827221643.544259-3-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-09-06rtc: twl: remove unnecessary messagesAlexandre Belloni
The RTC core already prints a message when the RTC is registered and when registering fails, it is not necessary to have more in the driver. Link: https://lore.kernel.org/r/20230827221643.544259-2-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-09-06rtc: sun6i: remove unnecessary messageAlexandre Belloni
The core already print a message once the rtc is successfully registered, it is not necessary to print an other one. Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230827221643.544259-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-09-06rtc: stop warning for invalid alarms when the alarm is disabledAlexandre Belloni
When the alarm is not enabled, it may never have been set and so we can't expect it to be valid. This will prevent the apparition of boot messages like this one: rtc rtc0: invalid alarm value: 2023-7-8 45:85:85 Link: https://lore.kernel.org/r/20230827221532.543353-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-09-06i3c: master: svc: fix probe failure when no i3c device existFrank Li
I3C masters are expected to support hot-join. This means at initialization time we might not yet discover any device and this should not be treated as a fatal error. During the DAA procedure which happens at probe time, if no device has joined, all CCC will be NACKed (from a bus perspective). This leads to an early return with an error code which fails the probe of the master. Let's avoid this by just telling the core through an I3C_ERROR_M2 return command code that no device was discovered, which is a valid situation. This way the master will no longer bail out and fail to probe for a wrong reason. Cc: stable@vger.kernel.org Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver") Signed-off-by: Frank Li <Frank.Li@nxp.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230831141324.2841525-1-Frank.Li@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-09-05idr: fix param name in idr_alloc_cyclic() docAriel Marcovitch
The relevant parameter is 'start' and not 'nextid' Fixes: 460488c58ca8 ("idr: Remove idr_alloc_ext") Signed-off-by: Ariel Marcovitch <arielmarcovitch@gmail.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2023-09-05xarray: Document necessary flag in alloc functionsPhilipp Stanner
Adds a new line to the docstrings of functions wrapping __xa_alloc() and __xa_alloc_cyclic(), informing about the necessity of flag XA_FLAGS_ALLOC being set previously. The documentation so far says that functions wrapping __xa_alloc() and __xa_alloc_cyclic() are supposed to return either -ENOMEM or -EBUSY in case of an error. If the xarray has been initialized without the flag XA_FLAGS_ALLOC, however, they fail with a different, undocumented error code. As hinted at in Documentation/core-api/xarray.rst, wrappers around these functions should only be invoked when the flag has been set. The functions' documentation should reflect that as well. Signed-off-by: Philipp Stanner <pstanner@redhat.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2023-09-05dt-bindings: irqchip: convert st,stih407-irq-syscfg to DT schemaRaphael Gallais-Pou
Convert deprecated format to DT schema format. Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230905072740.23859-1-rgallaispou@gmail.com Signed-off-by: Rob Herring <robh@kernel.org>
2023-09-05media: dt-bindings: Convert Omnivision OV7251 to DT schemaRob Herring
Convert the OmniVision OV7251 Image Sensor binding to DT schema format. vddd-supply was listed as required, but the example and actual user don't have it. Also, the data brief says it has an internal regulator, so perhaps it is truly optional. Add missing common "link-frequencies" which is used and required by the Linux driver. Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Link: https://lore.kernel.org/r/20230817202713.2180195-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-09-05media: dt-bindings: Merge OV5695 into OV5693 bindingRob Herring
The OV5695 binding is almost the same as the OV5693 binding. The only difference is 'clock-names' is defined for OV5695. However, the lack of clock-names is an omission as the Linux OV5693 driver expects the same 'xvclk' clock name. 'link-frequencies' is required by OV5693, but not OV5695, so make that conditional. Really, this shouldn't vary by device, but we're stuck with the existing binding use. The rockchip-isp1 binding example is missing required properties, so it has to be updated as well. Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230817202647.2179609-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-09-05Merge tag 'gfs2-v6.5-rc5-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 updates from Andreas Gruenbacher: - Fix a glock state (non-)transition bug when a dlm request times out and is canceled, and we have locking requests that can now be granted immediately - Various fixes and cleanups in how the logd and quotad daemons are woken up and terminated - Fix several bugs in the quota data reference counting and shrinking. Free quota data objects synchronously in put_super() instead of letting call_rcu() run wild - Make sure not to deallocate quota data during a withdraw; rather, defer quota data deallocation to put_super(). Withdraws can happen in contexts in which callers on the stack are holding quota data references - Many minor quota fixes and cleanups by Bob - Update the the mailing list address for gfs2 and dlm. (It's the same list for both and we are moving it to gfs2@lists.linux.dev) - Various other minor cleanups * tag 'gfs2-v6.5-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (51 commits) MAINTAINERS: Update dlm mailing list MAINTAINERS: Update gfs2 mailing list gfs2: change qd_slot_count to qd_slot_ref gfs2: check for no eligible quota changes gfs2: Remove useless assignment gfs2: simplify slot_get gfs2: Simplify qd2offset gfs2: introduce qd_bh_get_or_undo gfs2: Remove quota allocation info from quota file gfs2: use constant for array size gfs2: Set qd_sync_gen in do_sync gfs2: Remove useless err set gfs2: Small gfs2_quota_lock cleanup gfs2: move qdsb_put and reduce redundancy gfs2: improvements to sysfs status gfs2: Don't try to sync non-changes gfs2: Simplify function need_sync gfs2: remove unneeded pg_oflow variable gfs2: remove unneeded variable done gfs2: pass sdp to gfs2_write_buf_to_page ...
2023-09-05regulator: tps6594-regulator: Fix random kernel crashJerome Neanne
Random kernel crash detected in TI CICD when regulator driver is added. This is root caused to irq index increment being done twice causing irq_data being allocated outside of the range. - Rework tps6594_request_reg_irqs with correct index increment - Adjust irq_data kmalloc size to the exact size needed for the device This has been reported on TI mainline. No public bug report associated. Reported-by: Udit Kumar <u-kumar1@ti.com> Fixes: f17ccc5deb4d ("regulator: tps6594-regulator: Add driver for TI TPS6594 regulators") Signed-off-by: Jerome Neanne <jneanne@baylibre.com> Link: https://lore.kernel.org/r/20230828-tps6594_random_boot_crash_fix-v1-1-f29cbf9ddb37@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-09-05perf/x86/uncore: Correct the number of CHAs on EMRKan Liang
Starting from SPR, the basic uncore PMON information is retrieved from the discovery table (resides in an MMIO space populated by BIOS). It is called the discovery method. The existing value of the type->num_boxes is from the discovery table. On some SPR variants, there is a firmware bug that makes the value from the discovery table incorrect. We use the value from the SPR_MSR_UNC_CBO_CONFIG MSR to replace the one from the discovery table: 38776cc45eb7 ("perf/x86/uncore: Correct the number of CHAs on SPR") Unfortunately, the SPR_MSR_UNC_CBO_CONFIG isn't available for the EMR XCC (Always returns 0), but the above firmware bug doesn't impact the EMR XCC. Don't let the value from the MSR replace the existing value from the discovery table. Fixes: 38776cc45eb7 ("perf/x86/uncore: Correct the number of CHAs on SPR") Reported-by: Stephane Eranian <eranian@google.com> Reported-by: Yunying Sun <yunying.sun@intel.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Yunying Sun <yunying.sun@intel.com> Link: https://lore.kernel.org/r/20230905134248.496114-1-kan.liang@linux.intel.com
2023-09-05Merge tag 'fuse-update-6.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse updates from Miklos Szeredi: - Revert non-waiting FLUSH due to a regression - Fix a lookup counter leak in readdirplus - Add an option to allow shared mmaps in no-cache mode - Add btime support and statx intrastructure to the protocol - Invalidate positive/negative dentry on failed create/delete * tag 'fuse-update-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: conditionally fill kstat in fuse_do_statx() fuse: invalidate dentry on EEXIST creates or ENOENT deletes fuse: cache btime fuse: implement statx fuse: add ATTR_TIMEOUT macro fuse: add STATX request fuse: handle empty request_mask in statx fuse: write back dirty pages before direct write in direct_io_relax mode fuse: add a new fuse init flag to relax restrictions in no cache mode fuse: invalidate page cache pages before direct write fuse: nlookup missing decrement in fuse_direntplus_link Revert "fuse: in fuse_flush only wait if someone wants the return code"
2023-09-05thermal: core: Drop thermal_zone_device_register()Rafael J. Wysocki
There are no more users of thermal_zone_device_register(), so drop it from the core. Note that thermal_zone_device_register_with_trips() may be renamed to thermal_zone_device_register() in the future, but only after a grace period allowing all of the possible work in progress that may be using the latter to adjust. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-09-05thermal: Use thermal_tripless_zone_device_register()Rafael J. Wysocki
All of the remaining callers of thermal_zone_device_register() can use thermal_tripless_zone_device_register(), so make them do so in order to allow the former to be dropped. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
2023-09-05thermal: core: Add function for registering tripless thermal zonesRafael J. Wysocki
Multiple callers of thermal_zone_device_register() don't pass any trips to it and they might use a shortened argument list for that, so add a special function with fewer arguments for this purpose. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-09-05thermal: core: Clean up headers of thermal zone registration functionsRafael J. Wysocki
For consistency, add a missing thermal_zone_device_register_with_trips() stub for the CONFIG_THERMAL unset case, specify argument names in all of the thermal zone registration and unregistration function headers and make all of them use white space consistently. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-09-05Merge tag 'ata-6.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ata updates from Damien Le Moal: - Fix OF include file for ata platform drivers (Rob) - Simplify various ahci, sata and pata platform drivers using the function devm_platform_ioremap_resource() (Yangtao) - Cleanup libata time related argument types (e.g. timeouts values) (Sergey) - Cleanup libata code around error handling as all ata drivers now define a error_handler operation (Hannes and Niklas) - Remove functions intended for libsas that are in fact unused (Niklas) - Change the remove device callback of platform drivers to a null function (Uwe) - Simplify the pata_imx driver using devm_clk_get_enabled() (Li) - Remove old and uinused remnants of the ide code in arm, parisc, powerpc, sparc and m68k architectures and associated drivers (pata_buddha, pata_falcon and pata_gayle) (Geert) - Add missing MODULE_DESCRIPTION() in the sata_gemini and pata_ftide010 drivers (me) - Several fixes for the pata_ep93xx and pata_falcon drivers (Nikita, Michael) - Add Elkhart Lake AHCI controller support to the ahci driver (Werner) - Disable NCQ trim on Micron 1100 drives (Pawel) * tag 'ata-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (60 commits) ata: libata-core: Disable NCQ_TRIM on Micron 1100 drives ata: ahci: Add Elkhart Lake AHCI controller ata: pata_falcon: add data_swab option to byte-swap disk data ata: pata_falcon: fix IO base selection for Q40 ata: pata_ep93xx: use soc_device_match for UDMA modes ata: pata_ep93xx: fix error return code in probe ata: sata_gemini: Add missing MODULE_DESCRIPTION ata: pata_ftide010: Add missing MODULE_DESCRIPTION m68k: Remove <asm/ide.h> ata: pata_gayle: Remove #include <asm/ide.h> ata: pata_falcon: Remove #include <asm/ide.h> ata: pata_buddha: Remove #include <asm/ide.h> asm-generic: Remove ide_iops.h sparc: Remove <asm/ide.h> powerpc: Remove <asm/ide.h> parisc: Remove <asm/ide.h> ARM: Remove <asm/ide.h> ata: pata_imx: Use helper function devm_clk_get_enabled() ata: sata_rcar: Convert to platform remove callback returning void ata: sata_mv: Convert to platform remove callback returning void ...
2023-09-05Merge tag 'mailbox-v6.6' of ↵Linus Torvalds
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - qcom: fix incorrect num_chans counting - mhu: Remove redundant dev_err - bcm: fix comments - common changes: - convert to use devm_platform_get_and_ioremap_resource - correct DT includes * tag 'mailbox-v6.6' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: qcom-ipcc: fix incorrect num_chans counting mailbox: Explicitly include correct DT includes mailbox: ti-msgmgr: Use devm_platform_ioremap_resource_byname() mailbox: platform-mhu: Remove redundant dev_err() mailbox: bcm-pdc: Fix some kernel-doc comments mailbox: mailbox-test: Fix an error check in mbox_test_probe() mailbox: tegra-hsp: Convert to devm_platform_ioremap_resource() mailbox: rockchip: Use devm_platform_get_and_ioremap_resource() mailbox: mailbox-test: Use devm_platform_get_and_ioremap_resource() mailbox: bcm-pdc: Use devm_platform_get_and_ioremap_resource() mailbox: bcm-ferxrm-mailbox: Use devm_platform_get_and_ioremap_resource()
generated by cgit (git 2.34.1) at 2025-07-16 15:09:09 +0000