| Age | Commit message (Collapse) | Author |
|---|
|
Previously with tegra-smmu, even with CONFIG_IOMMU_DMA, the default domain
could have been left as NULL. The NULL domain is specially recognized by
host1x_client_iommu_attach() as meaning it is not the DMA domain and
should be replaced with the special shared domain.
This happened prior to the below commit because tegra-smmu was using the
NULL domain to mean IDENTITY.
Now that the domain is properly labled the test in DRM doesn't see NULL.
Check for IDENTITY as well to enable the special domains.
Fixes: c8cc2655cc6c ("iommu/tegra-smmu: Implement an IDENTITY domain")
Reported-by: diogo.ivo@tecnico.ulisboa.pt
Closes: https://lore.kernel.org/all/bbmhcoghrprmbdibnjum6lefix2eoquxrde7wyqeulm4xabmlm@b6jy32saugqh/
Tested-by: diogo.ivo@tecnico.ulisboa.pt
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v1-3049f92c4812+16691-host1x_def_dom_fix_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The ops->default_domain flow used a 0 req_type to select the default
domain and this was enforced by iommu_group_alloc_default_domain().
When !CONFIG_IOMMU_DMA started forcing the old ARM32 drivers into IDENTITY
it also overroad the 0 req_type of the ops->default_domain drivers to
IDENTITY which ends up causing failures during device probe.
Make iommu_group_alloc_default_domain() accept a req_type that matches the
ops->default_domain and have iommu_group_alloc_default_domain() generate a
req_type that matches the default_domain.
This way the req_type always describes what kind of domain should be
attached and ops->default_domain overrides all other mechanisms to choose
the default domain.
Fixes: 2ad56efa80db ("powerpc/iommu: Setup a default domain and remove set_platform_dma_ops")
Fixes: 0f6a90436a57 ("iommu: Do not use IOMMU_DOMAIN_DMA if CONFIG_IOMMU_DMA is not enabled")
Reported-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Closes: https://lore.kernel.org/linux-iommu/20240123165829.630276-1-ovidiu.panait@windriver.com/
Reported-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Closes: https://lore.kernel.org/linux-iommu/170618452753.3805.4425669653666211728.stgit@ltcd48-lp2.aus.stglab.ibm.com/
Tested-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v1-755bd21c4a64+525b8-iommu_def_dom_fix_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
root directory
It appears that Sony DVMC-DA1 has a quirk that the descriptor leaf entry
locates just after the vendor directory entry in root directory. This is
not conformant to the legacy layout of configuration ROM described in
Configuration ROM for AV/C Devices 1.0 (1394 Trading Association, Dec 2000,
TA Document 1999027).
This commit changes current implementation to parse configuration ROM for
device attributes so that the descriptor leaf entry can be detected for
the vendor name.
$ config-rom-pretty-printer < Sony-DVMC-DA1.img
ROM header and bus information block
-----------------------------------------------------------------
1024 041ee7fb bus_info_length 4, crc_length 30, crc 59387
1028 31333934 bus_name "1394"
1032 e0644000 irmc 1, cmc 1, isc 1, bmc 0, cyc_clk_acc 100, max_rec 4 (32)
1036 08004603 company_id 080046 |
1040 0014193c device_id 12886219068 | EUI-64 576537731003586876
root directory
-----------------------------------------------------------------
1044 0006b681 directory_length 6, crc 46721
1048 03080046 vendor
1052 0c0083c0 node capabilities: per IEEE 1394
1056 8d00000a --> eui-64 leaf at 1096
1060 d1000003 --> unit directory at 1072
1064 c3000005 --> vendor directory at 1084
1068 8100000a --> descriptor leaf at 1108
unit directory at 1072
-----------------------------------------------------------------
1072 0002cdbf directory_length 2, crc 52671
1076 1200a02d specifier id
1080 13010000 version
vendor directory at 1084
-----------------------------------------------------------------
1084 00020cfe directory_length 2, crc 3326
1088 17fa0000 model
1092 81000008 --> descriptor leaf at 1124
eui-64 leaf at 1096
-----------------------------------------------------------------
1096 0002c66e leaf_length 2, crc 50798
1100 08004603 company_id 080046 |
1104 0014193c device_id 12886219068 | EUI-64 576537731003586876
descriptor leaf at 1108
-----------------------------------------------------------------
1108 00039e26 leaf_length 3, crc 40486
1112 00000000 textual descriptor
1116 00000000 minimal ASCII
1120 536f6e79 "Sony"
descriptor leaf at 1124
-----------------------------------------------------------------
1124 0005001d leaf_length 5, crc 29
1128 00000000 textual descriptor
1132 00000000 minimal ASCII
1136 44564d43 "DVMC"
1140 2d444131 "-DA1"
1144 00000000
Suggested-by: Adam Goldman <adamg@pobox.com>
Tested-by: Adam Goldman <adamg@pobox.com>
Link: https://lore.kernel.org/r/20240130100409.30128-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
Against its current description, the kernel API can accepts all types of
directory entries.
This commit corrects the documentation.
Cc: stable@vger.kernel.org
Fixes: 3c2c58cb33b3 ("firewire: core: fw_csr_string addendum")
Link: https://lore.kernel.org/r/20240130100409.30128-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
This fixes warnings in xe, i915 hwmon docs:
Warning: /sys/devices/.../hwmon/hwmon<i>/curr1_crit is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:35 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:52
Warning: /sys/devices/.../hwmon/hwmon<i>/energy1_input is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:54 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:65
Warning: /sys/devices/.../hwmon/hwmon<i>/in0_input is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:46 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:0
Warning: /sys/devices/.../hwmon/hwmon<i>/power1_crit is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:22 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:39
Warning: /sys/devices/.../hwmon/hwmon<i>/power1_max is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:0 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:8
Warning: /sys/devices/.../hwmon/hwmon<i>/power1_max_interval is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:62 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:30
Warning: /sys/devices/.../hwmon/hwmon<i>/power1_rated_max is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:14 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:22
Use a path containing the driver name to differentiate the documentation
of each entry.
Fixes: fb1b70607f73 ("drm/xe/hwmon: Expose power attributes")
Fixes: 92d44a422d0d ("drm/xe/hwmon: Expose card reactive critical power")
Fixes: fbcdc9d3bf58 ("drm/xe/hwmon: Expose input voltage attribute")
Fixes: 71d0a32524f9 ("drm/xe/hwmon: Expose hwmon energy attribute")
Fixes: 4446fcf220ce ("drm/xe/hwmon: Expose power1_max_interval")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20240125113345.291118ff@canb.auug.org.au/
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240127165040.2348009-1-badal.nilawar@intel.com
(cherry picked from commit 20485e3a810c480cef60caf53988619f61127e7b)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
All GuC ABI definitions are unsigned and not defining as unsigned is
causing build errors [1].
[1] https://lore.kernel.org/all/20240123111235.3097079-1-geert@linux-m68k.org/
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240131025424.2087936-1-matthew.brost@intel.com
(cherry picked from commit d83d8ae275c6bf87506b71b8a1acd98452137dc5)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
The construct allocating only parts of the vma structure when
the userptr part is not needed is very fragile. A developer could
add additional fields below the userptr part, and the code could
easily attempt to access the userptr part even if its not persent.
So introduce xe_userptr_vma which subclasses struct xe_vma the
proper way, and accordingly modify a couple of interfaces.
This should also help if adding userptr helpers to drm_gpuvm.
v2:
- Fix documentation of to_userptr_vma() (Matthew Brost)
- Fix allocation and freeing of vmas to clearer distinguish
between the types.
Closes: https://lore.kernel.org/intel-xe/0c4cc1a7-f409-4597-b110-81f9e45d1ffe@embeddedor.com/T/#u
Fixes: a4cc60a55fd9 ("drm/xe: Only alloc userptr part of xe_vma for userptrs")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240131091628.12318-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 5bd24e78829ad569fa1c3ce9a05b59bb97b91f3d)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
The sparc build fails [1] due to CTX_VALID being redefined. Fix this by
using a better naming convention of LRC_VALID as this define is used in
setting bits in the lrc descriptor. To be uniform, change other define
with LRC prefix too.
[1] https://lore.kernel.org/all/20240123111235.3097079-1-geert@linux-m68k.org/
v2:
- s/LEGACY_64B_CONTEXT/LRC_LEGACY_64B_CONTEXT (Lucas)
Fixes: 0bc519d20ffa ("drm/xe: Remove GEN[0-9]*_ prefixes")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240123212638.1605626-1-matthew.brost@intel.com
(cherry picked from commit 152ca51d8db03f08a71c25e999812e263839fdce)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
The error pointer macros are not aware of __user pointers and as a
consequence sparse warns.
Have the copy_mask() function return an integer instead of a __user
pointer.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240117134048.165425-5-thomas.hellstrom@linux.intel.com
(cherry picked from commit 78366eed6853aa6a5deccb2eb182f9334d2bd208)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
These functions acquire and release the gt::mcr_lock. Annotate
accordingly.
Fix the corresponding sparse warning.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Fixes: fb1d55efdfcb ("drm/xe: Cleanup OPEN_BRACE style issues")
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240117134048.165425-4-thomas.hellstrom@linux.intel.com
(cherry picked from commit 97fd7a7e4e877676a2ab1a687ba958b70931abcc)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
The way exec ufences are coded only 1 ufence per IOCTL will be signaled.
It is possible to fix this but for current use cases 1 ufence per IOCTL
is sufficient. Enforce a limit of 1 ufence per IOCTL (both exec and bind
to be uniform).
v2:
- Add fixes tag (Thomas)
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Brian Welty <brian.welty@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124234413.1640825-1-matthew.brost@intel.com
(cherry picked from commit d1df9bfbf68c65418f30917f406b6d5bd597714e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
If skip_guc_pc is set for a platform, C6 is disabled directly without
acquiring a mem_access reference, triggering an assertion inside
xe_gt_idle_disable_c6.
Fixes: 975e4a3795d4 ("drm/xe: Manually setup C6 when skip_guc_pc is set")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126220613.865939-2-matthew.d.roper@intel.com
(cherry picked from commit 9f5971bdf78e0937206556534247243ad56cd735)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
trace_dma_fence_init() uses dma_fence_ops functions
like get_driver_name() and get_timeline_name() to generate trace
information but the Xe KMD implementation of those functions makes
use of xe_hw_fence_ctx that was being set after dma_fence_init().
So here just inverting the order to fix the crash.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124171830.95774-1-jose.souza@intel.com
(cherry picked from commit c6878e47431c72168da08dfbc1496c09b2d3c246)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Paolo Abeni says:
====================
selftests: net: a few pmtu.sh fixes
This series try to address CI failures for the pmtu.sh tests. It
does _not_ attempt to enable all the currently skipped cases, to
avoid adding more entropy.
Tested with:
make -C tools/testing/selftests/ TARGETS=net install
vng --build --config tools/testing/selftests/net/config
vng --run . --user root -- \
./tools/testing/selftests/kselftest_install/run_kselftest.sh \
-t net:pmtu.sh
====================
Link: https://lore.kernel.org/r/cover.1706635101.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When running the pmtu.sh via the kselftest infra, accessing
/dev/stdout gives unexpected results:
# dd: failed to open '/dev/stdout': Device or resource busy
# TEST: IPv4, bridged vxlan4: PMTU exceptions [FAIL]
Let dd use directly the standard output to fix the above:
# TEST: IPv4, bridged vxlan4: PMTU exceptions - nexthop objects [ OK ]
Fixes: 136a1b434bbb ("selftests: net: test vxlan pmtu exceptions with tcp")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/23d7592c5d77d75cff9b34f15c227f92e911c2ae.1706635101.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The pmtu.sh test tries to detect the tunnel protocols available
in the running kernel and properly skip the unsupported cases.
In a few more complex setup, such detection is unsuccessful, as
the script currently ignores some intermediate error code at
setup time.
Before:
# which: no nettest in (/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin)
# TEST: vti6: PMTU exceptions (ESP-in-UDP) [FAIL]
# PMTU exception wasn't created after creating tunnel exceeding link layer MTU
# ./pmtu.sh: line 931: kill: (7543) - No such process
# ./pmtu.sh: line 931: kill: (7544) - No such process
After:
# xfrm4 not supported
# TEST: vti4: PMTU exceptions [SKIP]
Fixes: ece1278a9b81 ("selftests: net: add ESP-in-UDP PMTU test")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/cab10e75fda618e6fff8c595b632f47db58b9309.1706635101.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mentioned test uses a few Kconfig still missing the
net config, add them.
Before:
# Error: Specified qdisc kind is unknown.
# Error: Specified qdisc kind is unknown.
# Error: Qdisc not classful.
# We have an error talking to the kernel
# Error: Qdisc not classful.
# We have an error talking to the kernel
# policy_routing not supported
# TEST: ICMPv4 with DSCP and ECN: PMTU exceptions [SKIP]
After:
# TEST: ICMPv4 with DSCP and ECN: PMTU exceptions [ OK ]
Fixes: ec730c3e1f0e ("selftest: net: Test IPv4 PMTU exceptions with DSCP and ECN")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/8d27bf6762a5c7b3acc457d6e6872c533040f9c1.1706635101.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Brett Creeley says:
====================
pds_core: Various fixes
This series includes the following changes:
There can be many users of the pds_core's adminq. This includes
pds_core's uses and any clients that depend on it. When the pds_core
device goes through a reset for any reason the adminq is freed
and reconfigured. There are some gaps in the current implementation
that will cause crashes during reset if any of the previously mentioned
users of the adminq attempt to use it after it's been freed.
Issues around how resets are handled, specifically regarding the driver's
error handlers.
Originally these patches were aimed at net-next, but it was requested to
push the fixes patches to net. The original patches can be found here:
https://lore.kernel.org/netdev/20240126174255.17052-1-brett.creeley@amd.com/
Also, the Reviewed-by tags were left in place from net-next reviews as the
patches didn't change.
====================
Link: https://lore.kernel.org/r/20240129234035.69802-1-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently the teardown/setup flow for driver probe/remove is quite
a bit different from the reset flows in pdsc_fw_down()/pdsc_fw_up().
One key piece that's missing are the calls to pci_alloc_irq_vectors()
and pci_free_irq_vectors(). The pcie reset case is calling
pci_free_irq_vectors() on reset_prepare, but not calling the
corresponding pci_alloc_irq_vectors() on reset_done. This is causing
unexpected/unwanted interrupt behavior due to the adminq interrupt
being accidentally put into legacy interrupt mode. Also, the
pci_alloc_irq_vectors()/pci_free_irq_vectors() functions are being
called directly in probe/remove respectively.
Fix this inconsistency by making the following changes:
1. Always call pdsc_dev_init() in pdsc_setup(), which calls
pci_alloc_irq_vectors() and get rid of the now unused
pds_dev_reinit().
2. Always free/clear the pdsc->intr_info in pdsc_teardown()
since this structure will get re-alloced in pdsc_setup().
3. Move the calls of pci_free_irq_vectors() to pdsc_teardown()
since pci_alloc_irq_vectors() will always be called in
pdsc_setup()->pdsc_dev_init() for both the probe/remove and
reset flows.
4. Make sure to only create the debugfs "identity" entry when it
doesn't already exist, which it will in the reset case because
it's already been created in the initial call to pdsc_dev_init().
Fixes: ffa55858330f ("pds_core: implement pci reset handlers")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240129234035.69802-7-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During reset the BARs might be accessed when they are
unmapped. This can cause unexpected issues, so fix it by
clearing the cached BAR values so they are not accessed
until they are re-mapped.
Also, make sure any places that can access the BARs
when they are NULL are prevented.
Fixes: 49ce92fbee0b ("pds_core: add FW update feature to devlink")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240129234035.69802-6-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are multiple paths that can result in using the pdsc's
adminq.
[1] pdsc_adminq_isr and the resulting work from queue_work(),
i.e. pdsc_work_thread()->pdsc_process_adminq()
[2] pdsc_adminq_post()
When the device goes through reset via PCIe reset and/or
a fw_down/fw_up cycle due to bad PCIe state or bad device
state the adminq is destroyed and recreated.
A NULL pointer dereference can happen if [1] or [2] happens
after the adminq is already destroyed.
In order to fix this, add some further state checks and
implement reference counting for adminq uses. Reference
counting was used because multiple threads can attempt to
access the adminq at the same time via [1] or [2]. Additionally,
multiple clients (i.e. pds-vfio-pci) can be using [2]
at the same time.
The adminq_refcnt is initialized to 1 when the adminq has been
allocated and is ready to use. Users/clients of the adminq
(i.e. [1] and [2]) will increment the refcnt when they are using
the adminq. When the driver goes into a fw_down cycle it will
set the PDSC_S_FW_DEAD bit and then wait for the adminq_refcnt
to hit 1. Setting the PDSC_S_FW_DEAD before waiting will prevent
any further adminq_refcnt increments. Waiting for the
adminq_refcnt to hit 1 allows for any current users of the adminq
to finish before the driver frees the adminq. Once the
adminq_refcnt hits 1 the driver clears the refcnt to signify that
the adminq is deleted and cannot be used. On the fw_up cycle the
driver will once again initialize the adminq_refcnt to 1 allowing
the adminq to be used again.
Fixes: 01ba61b55b20 ("pds_core: Add adminq processing and commands")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240129234035.69802-5-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The initial design for the adminq interrupt was done based
on client drivers having their own adminq and adminq
interrupt. So, each client driver's adminq isr would use
their specific adminqcq for the private data struct. For the
time being the design has changed to only use a single
adminq for all clients. So, instead use the struct pdsc for
the private data to simplify things a bit.
This also has the benefit of not dereferencing the adminqcq
to access the pdsc struct when the PDSC_S_STOPPING_DRIVER bit
is set and the adminqcq has actually been cleared/freed.
Fixes: 01ba61b55b20 ("pds_core: Add adminq processing and commands")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240129234035.69802-4-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a small window where pdsc_work_thread()
calls pdsc_process_adminq() and pdsc_process_adminq()
passes the PDSC_S_STOPPING_DRIVER check and starts
to process adminq/notifyq work and then the driver
starts a fw_down cycle. This could cause some
undefined behavior if the notifyqcq/adminqcq are
free'd while pdsc_process_adminq() is running. Use
cancel_work_sync() on the adminqcq's work struct
to make sure any pending work items are cancelled
and any in progress work items are completed.
Also, make sure to not call cancel_work_sync() if
the work item has not be initialized. Without this,
traces will happen in cases where a reset fails and
teardown is called again or if reset fails and the
driver is removed.
Fixes: 01ba61b55b20 ("pds_core: Add adminq processing and commands")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240129234035.69802-3-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PCIe reset handlers can run at the same time as the
health thread. This can cause the health thread to
stomp on the PCIe reset. Fix this by preventing the
health thread from running while a PCIe reset is happening.
As part of this use timer_shutdown_sync() during reset and
remove to make sure the timer doesn't ever get rearmed.
Fixes: ffa55858330f ("pds_core: implement pci reset handlers")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240129234035.69802-2-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported a lockdep splat [1].
Blamed commit hinted about the possible lockdep
violation, and code used unix_state_lock_nested()
in an attempt to silence lockdep.
It is not sufficient, because unix_state_lock_nested()
is already used from unix_state_double_lock().
We need to use a separate subclass.
This patch adds a distinct enumeration to make things
more explicit.
Also use swap() in unix_state_double_lock() as a clean up.
v2: add a missing inline keyword to unix_state_lock_nested()
[1]
WARNING: possible circular locking dependency detected
6.8.0-rc1-syzkaller-00356-g8a696a29c690 #0 Not tainted
syz-executor.1/2542 is trying to acquire lock:
ffff88808b5df9e8 (rlock-AF_UNIX){+.+.}-{2:2}, at: skb_queue_tail+0x36/0x120 net/core/skbuff.c:3863
but task is already holding lock:
ffff88808b5dfe70 (&u->lock/1){+.+.}-{2:2}, at: unix_dgram_sendmsg+0xfc7/0x2200 net/unix/af_unix.c:2089
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&u->lock/1){+.+.}-{2:2}:
lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754
_raw_spin_lock_nested+0x31/0x40 kernel/locking/spinlock.c:378
sk_diag_dump_icons net/unix/diag.c:87 [inline]
sk_diag_fill+0x6ea/0xfe0 net/unix/diag.c:157
sk_diag_dump net/unix/diag.c:196 [inline]
unix_diag_dump+0x3e9/0x630 net/unix/diag.c:220
netlink_dump+0x5c1/0xcd0 net/netlink/af_netlink.c:2264
__netlink_dump_start+0x5d7/0x780 net/netlink/af_netlink.c:2370
netlink_dump_start include/linux/netlink.h:338 [inline]
unix_diag_handler_dump+0x1c3/0x8f0 net/unix/diag.c:319
sock_diag_rcv_msg+0xe3/0x400
netlink_rcv_skb+0x1df/0x430 net/netlink/af_netlink.c:2543
sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:280
netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
netlink_unicast+0x7e6/0x980 net/netlink/af_netlink.c:1367
netlink_sendmsg+0xa37/0xd70 net/netlink/af_netlink.c:1908
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
sock_write_iter+0x39a/0x520 net/socket.c:1160
call_write_iter include/linux/fs.h:2085 [inline]
new_sync_write fs/read_write.c:497 [inline]
vfs_write+0xa74/0xca0 fs/read_write.c:590
ksys_write+0x1a0/0x2c0 fs/read_write.c:643
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
-> #0 (rlock-AF_UNIX){+.+.}-{2:2}:
check_prev_add kernel/locking/lockdep.c:3134 [inline]
check_prevs_add kernel/locking/lockdep.c:3253 [inline]
validate_chain+0x1909/0x5ab0 kernel/locking/lockdep.c:3869
__lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137
lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0xd5/0x120 kernel/locking/spinlock.c:162
skb_queue_tail+0x36/0x120 net/core/skbuff.c:3863
unix_dgram_sendmsg+0x15d9/0x2200 net/unix/af_unix.c:2112
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
____sys_sendmsg+0x592/0x890 net/socket.c:2584
___sys_sendmsg net/socket.c:2638 [inline]
__sys_sendmmsg+0x3b2/0x730 net/socket.c:2724
__do_sys_sendmmsg net/socket.c:2753 [inline]
__se_sys_sendmmsg net/socket.c:2750 [inline]
__x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2750
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&u->lock/1);
lock(rlock-AF_UNIX);
lock(&u->lock/1);
lock(rlock-AF_UNIX);
*** DEADLOCK ***
1 lock held by syz-executor.1/2542:
#0: ffff88808b5dfe70 (&u->lock/1){+.+.}-{2:2}, at: unix_dgram_sendmsg+0xfc7/0x2200 net/unix/af_unix.c:2089
stack backtrace:
CPU: 1 PID: 2542 Comm: syz-executor.1 Not tainted 6.8.0-rc1-syzkaller-00356-g8a696a29c690 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106
check_noncircular+0x366/0x490 kernel/locking/lockdep.c:2187
check_prev_add kernel/locking/lockdep.c:3134 [inline]
check_prevs_add kernel/locking/lockdep.c:3253 [inline]
validate_chain+0x1909/0x5ab0 kernel/locking/lockdep.c:3869
__lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137
lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0xd5/0x120 kernel/locking/spinlock.c:162
skb_queue_tail+0x36/0x120 net/core/skbuff.c:3863
unix_dgram_sendmsg+0x15d9/0x2200 net/unix/af_unix.c:2112
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
____sys_sendmsg+0x592/0x890 net/socket.c:2584
___sys_sendmsg net/socket.c:2638 [inline]
__sys_sendmmsg+0x3b2/0x730 net/socket.c:2724
__do_sys_sendmmsg net/socket.c:2753 [inline]
__se_sys_sendmmsg net/socket.c:2750 [inline]
__x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2750
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
RIP: 0033:0x7f26d887cda9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f26d95a60c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 00007f26d89abf80 RCX: 00007f26d887cda9
RDX: 000000000000003e RSI: 00000000200bd000 RDI: 0000000000000004
RBP: 00007f26d88c947a R08: 0000000000000000 R09: 0000000000000000
R10: 00000000000008c0 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000000b R14: 00007f26d89abf80 R15: 00007ffcfe081a68
Fixes: 2aac7a2cb0d9 ("unix_diag: Pending connections IDs NLA")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240130184235.1620738-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The fc transport logs the opcode and fctype on command timeout.
This is sufficient information to identify the command issued,
but not very human-readable. Use the nvme_fabrics_opcode_str()
helper to also log the name of the command, as rdma and tcp already do.
Signed-off-by: Caleb Sander <csander@purestorage.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
nvme_opcode_str() currently supports admin, IO, and fabrics commands.
However, fabrics commands aren't allowed for the pci transport.
Currently the pci caller passes 0 as the fctype,
which means any fabrics command would be displayed as "Property Set".
Move fabrics command support into a function nvme_fabrics_opcode_str()
and remove the fctype argument to nvme_opcode_str().
This way, a fabrics command will display as "Unknown" for pci.
Convert the rdma and tcp transports to use nvme_fabrics_opcode_str().
Signed-off-by: Caleb Sander <csander@purestorage.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Dmitry Safonov says:
====================
selftests/net: A couple of typos fixes in key-management/rst tests
Two typo fixes, noticed by Mohammad's review.
And a fix for an issue that got uncovered.
v1: https://lore.kernel.org/r/20240118-tcp-ao-test-key-mgmt-v1-0-3583ca147113@arista.com
Signed-off-by: Dmitry Safonov <dima@arista.com>
====================
Link: https://lore.kernel.org/r/20240130-tcp-ao-test-key-mgmt-v2-0-d190430a6c60@arista.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the test is racy and seems to not pass anymore.
In order to rectify it, aim on TCP_TW_RST.
Doesn't seem way too good with this sleep() part, but it seems as
a reasonable compromise for the test. There is a plan in-line comment on
how-to improve it, going to do it on the top, at this moment I want it
to run on netdev/patchwork selftests dashboard.
It also slightly changes tcp_ao-lib in order to get SO_ERROR propagated
to test_client_verify() return value.
Fixes: c6df7b2361d7 ("selftests/net: Add TCP-AO RST test")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://lore.kernel.org/r/20240130-tcp-ao-test-key-mgmt-v2-3-d190430a6c60@arista.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As the names of (struct test_key) members didn't reflect whether the key
was used for TX or RX, the verification for the counters was done
incorrectly for asymmetrical selftests.
Rename these with _tx appendix and fix checks in verify_counters().
While at it, as the checks are now correct, introduce skip_counters_checks,
which is intended for tests where it's expected that a key that was set
with setsockopt(sk, IPPROTO_TCP, TCP_AO_INFO, ...) might had no chance
of getting used on the wire.
Fixes the following failures, exposed by the previous commit:
> not ok 51 server: Check current != rnext keys set before connect(): Counter pkt_good was expected to increase 0 => 0 for key 132:5
> not ok 52 server: Check current != rnext keys set before connect(): Counter pkt_good was not expected to increase 0 => 21 for key 137:10
>
> not ok 63 server: Check current flapping back on peer's RnextKey request: Counter pkt_good was expected to increase 0 => 0 for key 132:5
> not ok 64 server: Check current flapping back on peer's RnextKey request: Counter pkt_good was not expected to increase 0 => 40 for key 137:10
Cc: Mohammad Nassiri <mnassiri@ciena.com>
Fixes: 3c3ead555648 ("selftests/net: Add TCP-AO key-management test")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://lore.kernel.org/r/20240130-tcp-ao-test-key-mgmt-v2-2-d190430a6c60@arista.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The end_server() function only operates in the server thread
and always takes an accept socket instead of a listen socket as
its input argument. To align with this, invert the boolean values
used when calling verify_counters() within the end_server() function.
As a result of this typo, the test didn't correctly check for
the non-symmetrical scenario, where i.e. peer-A uses a key <100:200>
to send data, but peer-B uses another key <105:205> to send its data.
So, in simple words, different keys for TX and RX.
Fixes: 3c3ead555648 ("selftests/net: Add TCP-AO key-management test")
Signed-off-by: Mohammad Nassiri <mnassiri@ciena.com>
Link: https://lore.kernel.org/all/934627c5-eebb-4626-be23-cfb134c01d1a@arista.com/
[amended 'Fixes' tag, added the issue description and carried-over to lkml]
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://lore.kernel.org/r/20240130-tcp-ao-test-key-mgmt-v2-1-d190430a6c60@arista.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nvme_is_fabrics() and nvme_is_write() only read struct nvme_command,
so take it by const pointer. This allows callers to pass a const pointer
and communicates that these functions don't modify the command.
Signed-off-by: Caleb Sander <csander@purestorage.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
In nvme_get_error_status_str(), the status code is already masked
with 0x7ff at the beginning of the function.
Don't bother masking it again when indexing nvme_statuses.
Signed-off-by: Caleb Sander <csander@purestorage.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The functions in drivers/nvme/host/constants.c returning human-readable
status and opcode strings currently use type "const unsigned char *".
Typically string constants use type "const char *",
so remove "unsigned" from the return types.
This is a purely cosmetic change to clarify that the functions
return text strings instead of an array of bytes, for example.
Signed-off-by: Caleb Sander <csander@purestorage.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Add MODULE_DESCRIPTION() in order to remove warnings & get clean build:-
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvme/common/nvme-auth.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvme/common/nvme-keyring.o
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Authentication commands might trigger a lengthy computation on the
controller or even a callout to an external entity.
In these cases the controller might return a status without the DNR
bit set, indicating that the command should be retried.
This patch enables retries for authentication commands by setting
NVME_SUBMIT_RETRY for __nvme_submit_sync_cmd().
Reported-by: Martin George <marting@netapp.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Combine the two arguments 'flags' and 'at_head' from __nvme_submit_sync_cmd()
into a single 'flags' argument and use function-specific values to indicate
what should be set within the function.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
No point in having macros just for a single function nvme_auth_submit().
Open-code them into the caller.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Not all mv88e6xxx device support C45 read/write operations. Those
which do not return -EOPNOTSUPP. However, when phylib scans the bus,
it considers this fatal, and the probe of the MDIO bus fails, which in
term causes the mv88e6xxx probe as a whole to fail.
When there is no device on the bus for a given address, the pull up
resistor on the data line results in the read returning 0xffff. The
phylib core code understands this when scanning for devices on the
bus. C45 allows multiple devices to be supported at one address, so
phylib will perform a few reads at each address, so although thought
not the most efficient solution, it is a way to avoid fatal
errors. Make use of this as a minimal fix for stable to fix the
probing problems.
Follow up patches will rework how C45 operates to make it similar to
C22 which considers -ENODEV as a none-fatal, and swap mv88e6xxx to
using this.
Cc: stable@vger.kernel.org
Fixes: 743a19e38d02 ("net: dsa: mv88e6xxx: Separate C22 and C45 transactions")
Reported-by: Tim Menninger <tmenninger@purestorage.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240129224948.1531452-1-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When inetdev_valid_mtu fails, cork->opt should be freed if it is
allocated in ip_setup_cork. Otherwise there could be a memleak.
Fixes: 501a90c94510 ("inet: protect against too small mtu values.")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240129091017.2938835-1-alexious@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Bhupesh's email responds indicating they've changed employers and with
no new contact information. Let's drop the line from MAINTAINERS to
avoid getting the same response over and over.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240129-remove-dwmac-qcom-ethqos-reviewer-v1-1-2645eab61451@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Following a successful cifs_tree_connect, we have the code
to scale up/down the number of channels in the session.
However, it is not protected by a lock today.
As a result, this code can be executed by several processes
that select the same channel. The core functions handle this
well, as they pick chan_lock. However, we've seen cases where
smb2_reconnect throws some warnings.
To fix that, this change introduces a flags bitmap inside the
cifs_ses structure. A new flag type is used to ensure that
only one process enters this section at any time.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Allows us to detect subsequent IH ring buffer overflows as well.
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There is no irq enabled in vcn 4.0.5 resume, causing wrong amdgpu_irq_src status.
Beside, current set function callbacks are empty with no real effect.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
No need to set GC golden settings in driver from gfx 11.5.0 onwards.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix a warning.
v2: Avoid unmapping attachment repeatedly when ERESTARTSYS.
v3: Lock the BO before accessing ttm->sg to avoid race conditions.(Felix)
[ 41.708711] WARNING: CPU: 0 PID: 1463 at drivers/gpu/drm/ttm/ttm_bo.c:846 ttm_bo_validate+0x146/0x1b0 [ttm]
[ 41.708989] Call Trace:
[ 41.708992] <TASK>
[ 41.708996] ? show_regs+0x6c/0x80
[ 41.709000] ? ttm_bo_validate+0x146/0x1b0 [ttm]
[ 41.709008] ? __warn+0x93/0x190
[ 41.709014] ? ttm_bo_validate+0x146/0x1b0 [ttm]
[ 41.709024] ? report_bug+0x1f9/0x210
[ 41.709035] ? handle_bug+0x46/0x80
[ 41.709041] ? exc_invalid_op+0x1d/0x80
[ 41.709048] ? asm_exc_invalid_op+0x1f/0x30
[ 41.709057] ? amdgpu_amdkfd_gpuvm_dmaunmap_mem+0x2c/0x80 [amdgpu]
[ 41.709185] ? ttm_bo_validate+0x146/0x1b0 [ttm]
[ 41.709197] ? amdgpu_amdkfd_gpuvm_dmaunmap_mem+0x2c/0x80 [amdgpu]
[ 41.709337] ? srso_alias_return_thunk+0x5/0x7f
[ 41.709346] kfd_mem_dmaunmap_attachment+0x9e/0x1e0 [amdgpu]
[ 41.709467] amdgpu_amdkfd_gpuvm_dmaunmap_mem+0x56/0x80 [amdgpu]
[ 41.709586] kfd_ioctl_unmap_memory_from_gpu+0x1b7/0x300 [amdgpu]
[ 41.709710] kfd_ioctl+0x1ec/0x650 [amdgpu]
[ 41.709822] ? __pfx_kfd_ioctl_unmap_memory_from_gpu+0x10/0x10 [amdgpu]
[ 41.709945] ? srso_alias_return_thunk+0x5/0x7f
[ 41.709949] ? tomoyo_file_ioctl+0x20/0x30
[ 41.709959] __x64_sys_ioctl+0x9c/0xd0
[ 41.709967] do_syscall_64+0x3f/0x90
[ 41.709973] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Fixes: 101b8104307e ("drm/amdkfd: Move dma unmapping after TLB flush")
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Return 0 for success scenairos in 'gmc_v6/7/8/9_0_hw_init()'
Fixes the below:
drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c:920 gmc_v6_0_hw_init() warn: missing error code? 'r'
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:1104 gmc_v7_0_hw_init() warn: missing error code? 'r'
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:1224 gmc_v8_0_hw_init() warn: missing error code? 'r'
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:2347 gmc_v9_0_hw_init() warn: missing error code? 'r'
Fixes: fac4ebd79fed ("drm/amdgpu: Fix with right return code '-EIO' in 'amdgpu_gmc_vram_checking()'")
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The error message buffer overflow 'dc->links' 12 <= 12 suggests that the
code is trying to access an element of the dc->links array that is
beyond its bounds. In C, arrays are zero-indexed, so an array with 12
elements has valid indices from 0 to 11. Trying to access dc->links[12]
would be an attempt to access the 13th element of a 12-element array,
which is a buffer overflow.
To fix this, ensure that the loop does not go beyond the last valid
index when accessing dc->links[i + 1] by subtracting 1 from the loop
condition.
This would ensure that i + 1 is always a valid index in the array.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_dpia_bw.c:208 get_host_router_total_dp_tunnel_bw() error: buffer overflow 'dc->links' 12 <= 12
Fixes: 59f1622a5f05 ("drm/amd/display: Add dpia display mode validation logic")
Cc: PeiChen Huang <peichen.huang@amd.com>
Cc: Aric Cyr <aric.cyr@amd.com>
Cc: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add a NULL check for the kzalloc call that allocates memory for
dummy_updates in the amdgpu_dm_atomic_commit_tail function. Previously,
if kzalloc failed to allocate memory and returned NULL, the code would
attempt to use the NULL pointer.
The fix is to check if kzalloc returns NULL, and if so, log an error
message and skip the rest of the current loop iteration with the
continue statement. This prevents the code from attempting to use the
NULL pointer.
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202401300629.ICnCt983-lkp@intel.com/
Fixes: 135fd1b35690 ("drm/amd/display: Reduce stack size")
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The same calls are made directly above, but conditional on the firmware
loading and validating successfully.
Cc: stable@vger.kernel.org
Fixes: 9931b67690cf ("drm/amd: Load GFX10 microcode during early_init")
Signed-off-by: David McFarland <corngood@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
