Age | Commit message (Collapse) | Author |
|
Avoid allocating memory in job_run() by pre-allocating the hw_fence.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527832/
Link: https://lore.kernel.org/r/20230320144356.803762-2-robdclark@gmail.com
|
|
Selecting CONFIG_PM_GENERIC_DOMAINS causes a build failure when CONFIG_PM
is not enabled:
WARNING: unmet direct dependencies detected for PM_GENERIC_DOMAINS
Depends on [n]: PM [=n]
Selected by [m]:
- DRM_MSM [=m] && HAS_IOMEM [=y] && DRM [=m] && (ARCH_QCOM [=y] || SOC_IMX5 || COMPILE_TEST [=y]) && COMMON_CLK [=y] && IOMMU_SUPPORT [=y] && (QCOM_OCMEM [=y] || QCOM_OCMEM [=y]=n) && (QCOM_LLCC [=n] || QCOM_LLCC [=n]=n) && (QCOM_COMMAND_DB [=y] || QCOM_COMMAND_DB [=y]=n) && DEVFREQ_GOV_SIMPLE_ONDEMAND [=y]
drivers/base/power/domain.c:654:13: error: use of undeclared identifier 'pm_wq'
queue_work(pm_wq, &genpd->power_off_work);
^
drivers/base/power/domain.c:853:26: error: no member named 'ignore_children' in 'struct dev_pm_info'
if (!dev || dev->power.ignore_children)
~~~~~~~~~~ ^
Fixes: c11fa1204fe9 ("drm/msm/a6xx: Use genpd notifier to ensure cx-gdsc collapse")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/528597/
Link: https://lore.kernel.org/r/20230324095502.3289094-1-arnd@kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Propagate the deadline to all the fences in the array.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
|
|
Add a way to hint to the fence signaler of an upcoming deadline, such as
vblank, which the fence waiter would prefer not to miss. This is to aid
the fence signaler in making power management decisions, like boosting
frequency as the deadline approaches and awareness of missing deadlines
so that can be factored in to the frequency scaling.
v2: Drop dma_fence::deadline and related logic to filter duplicate
deadlines, to avoid increasing dma_fence size. The fence-context
implementation will need similar logic to track deadlines of all
the fences on the same timeline. [ckoenig]
v3: Clarify locking wrt. set_deadline callback
v4: Clarify in docs comment that this is a hint
v5: Drop DMA_FENCE_FLAG_HAS_DEADLINE_BIT.
v6: More docs
v7: Fix typo, clarify past deadlines
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
|
|
It's been a bit overdue. Regen headers to pull in a2xx perfcntr
updates, etc.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527926/
Link: https://lore.kernel.org/r/20230320185416.938842-2-robdclark@gmail.com
|
|
The next generated header update will drop the _LO/_HI suffix, now that
the userspace tooling properly understands 64b vs 32b regs (and the _LO/
_HI workarounds are getting cleaned up). So convert to using the 64b
reg helpers in prep.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527923/
Link: https://lore.kernel.org/r/20230320185416.938842-1-robdclark@gmail.com
|
|
Downstream driver appears to not support preemption on A510 target,
trying to use one make device slow and fill log with rings related errors.
Set num_rings to 1 to disable preemption.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: e20c9284c8f2 ("drm/msm/adreno: Add support for Adreno 510 GPU")
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/526898/
Link: https://lore.kernel.org/r/20230314221757.13096-1-a39.skl@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Update the URI for MSM DRM bugs for users to be able
to file bugs at a centralized location.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/525026/
Link: https://lore.kernel.org/r/1677972416-7353-1-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Clean up the component ops initialisers which were indented one level
too far.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/524973/
Link: https://lore.kernel.org/r/20230303164807.13124-5-johan+linaro@kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The runtime PM status can only be updated while runtime PM is disabled.
Drop the bogus pm_runtime_set_active() call that was made after enabling
runtime PM and which (incidentally but correctly) left the runtime PM
status set to 'suspended'.
Fixes: 2c087a336676 ("drm/msm/adreno: Load the firmware before bringing up the hardware")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/524972/
Link: https://lore.kernel.org/r/20230303164807.13124-4-johan+linaro@kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
A recent commit moved enabling of runtime PM to GPU load time (first
open()) but failed to update the error paths so that runtime PM is
disabled if initialisation of the GPU fails. This would trigger a
warning about the unbalanced disable count on the next open() attempt.
Note that pm_runtime_put_noidle() is sufficient to balance the usage
count when pm_runtime_put_sync() fails (and is chosen over
pm_runtime_resume_and_get() for consistency reasons).
Fixes: 4b18299b3365 ("drm/msm/adreno: Defer enabling runpm until hw_init()")
Cc: stable@vger.kernel.org # 6.0
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/524971/
Link: https://lore.kernel.org/r/20230303164807.13124-3-johan+linaro@kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Add the dev_pm_opp_of_find_icc_paths() call to let the OPP framework
handle bus voting as part of power level setting.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/523787/
Link: https://lore.kernel.org/r/20230223-topic-opp-v3-7-5f22163cd1df@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Add support for gpu_busy on a4xx, which is required for devfreq
support.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/523791/
Link: https://lore.kernel.org/r/20230223-topic-opp-v3-6-5f22163cd1df@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Add support for gpu_busy on a3xx, which is required for devfreq
support.
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #ifc6410
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/523789/
Link: https://lore.kernel.org/r/20230223-topic-opp-v3-5-5f22163cd1df@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Some older GPUs (namely a2xx with no opp tables at all and a320 with
downstream-remnants gpu pwrlevels) used not to have OPP tables. They
both however had just one frequency defined, making it extremely easy
to construct such an OPP table from within the driver if need be.
Do so and switch all clk_set_rate calls on core_clk to their OPP
counterparts.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/523784/
Link: https://lore.kernel.org/r/20230223-topic-opp-v3-3-5f22163cd1df@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
As per the recommended recovery sequence of adreno gpu, cx gdsc should
collapse at hardware before it is turned back ON. This helps to clear
out the stale states in hardware before it is reinitialized. Use the
genpd notifier along with the newly introduced
dev_pm_genpd_synced_poweroff() api to ensure that cx gdsc has collapsed
before we turn it back ON.
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/516472/
Link: https://lore.kernel.org/r/20230102161757.v5.5.I9e10545c6a448d5eb1b734839b871d1b3146dac3@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Remove the unused 'reset' interface which was supposed to help to ensure
that cx gdsc has collapsed during gpu recovery. This is was not enabled
so far due to missing gpucc driver support. Similar functionality using
genpd framework will be implemented in the upcoming patch.
This effectively reverts commit 1f6cca404918
("drm/msm/a6xx: Ensure CX collapse during gpu recovery").
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Patchwork: https://patchwork.freedesktop.org/patch/516470/
Link: https://lore.kernel.org/r/20230102161757.v5.4.I96e0bf9eaf96dd866111c1eec8a4c9b70fd7cbcb@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
When a device has multiple power domains, dev->power_domain is left
empty during probe. That didn't cause any issue so far because we are
freeloading on smmu driver's vote on cx gdsc. Instead of that, create
a device_link between cx genpd device and gmu device to keep a vote from
gpu driver.
Before this patch:
localhost ~ # cat /sys/kernel/debug/pm_genpd/pm_genpd_summary
gx_gdsc on 0
/devices/genpd:1:3d6a000.gmu active 0
cx_gdsc on 0
/devices/platform/soc@0/3da0000.iommu active 0
After this patch:
localhost ~ # cat /sys/kernel/debug/pm_genpd/pm_genpd_summary
gx_gdsc on 0
/devices/genpd:1:3d6a000.gmu active 0
cx_gdsc on 0
/devices/platform/soc@0/3da0000.iommu active 0
/devices/genpd:0:3d6a000.gmu active 0
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/516468/
Link: https://lore.kernel.org/r/20230102161757.v5.3.I7f545d8494dcdbe6e96a15fbe8aaf5bb0c003d50@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Merge drm-next into msm-next to pick up external clk and PM dependencies
for improved a6xx GPU reset sequence.
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
Cross-subsystem Changes:
- MEI patches to fix suspend/resume issues with the i915's PXP. (Alexander)
Driver Changes:
- Registers helpers and clean-ups. (Lucas)
- PXP fixes and clean-ups. (Alan, Alexander)
- CDCLK related fixes and w/a (Chaitanya, Stanislav)
- Move display code to use RMW whenever possible (Andrzej)
- PSR fixes (Jouni, Ville)
- Implement async_flip mode per plane tracking (Andrzej)
- Remove pre-production Workarounds (Matt)
- HDMI related fixes (Ankit)
- LVDS cleanup (Ville)
- Watermark fixes and cleanups (Ville, Jani, Stanilav)
- DMC code related fixes, cleanups and improvements (Jani)
- Implement fb_dirty for PSR,FBC,DRRS fixes (Jouni)
- Initial DSB improvements targeting LUTs loading (Ville)
- HWMON related fixes (Ashutosh)
- PCI ID updates (Jonathan, Matt Roper)
- Fix leak in scatterlist (Matt Atwood)
- Fix eDP+DSI dual panel systems (Ville)
- Cast iomem to avoid sparese warnings (Jani)
- Set default backlight controller index (Jani)
- More MTL enabling (RK)
- Conversion of display dev_priv towards i915 (Nirmoy)
- Improvements in log/debug messages (Ville)
- Increase slice_height for DP VDSC (Suraj)
- VBT ports improvements (Ville)
- Fix platforms without Display (Imre)
- Other generic display code clean-ups (Ville, Jani, Rodrigo)
- Add RPL-U sub platform (Chaitanya)
- Add inverted backlight quirk for HP 14-r206nv (Mavroudis)
- Transcoder timing improvements (Ville)
- Track audio state per-transcoder (Ville)
- Error/underrun interrupt fixes (Ville)
- Update combo PHY init sequence (Matt Roper)
- Get HDR DPCD refresh timeout (Ville)
- Vblank improvements (Ville)
- DSS fixes and cleanups (Jani)
- PM code cleanup (Jani)
- Split display parts related to RPS (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZAez4aekcob8fTeh@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.4-rc1:
Note: Only changes since pull request from 2023-02-23 are included here.
UAPI Changes:
- Convert rockchip bindings to YAML.
- Constify kobj_type structure in dma-buf.
- FBDEV cmdline parser fixes, and other small fbdev fixes for mode
parsing.
Cross-subsystem Changes:
- Add Neil Armstrong as linaro maintainer.
- Actually signal the private stub dma-fence.
Core Changes:
- Add function for adding syncobj dep to sched_job and use it in panfrost, v3d.
- Improve DisplayID 2.0 topology parsing and EDID parsing in general.
- Add a gem eviction function and callback for generic GEM shrinker
purposes.
- Prepare to convert shmem helper to use the GEM reservation lock instead of own
locking. (Actual commit itself got reverted for now)
- Move the suballocator from radeon and amdgpu drivers to core in preparation
for Xe.
- Assorted small fixes and documentation.
- Fixes to HPD polling.
- Assorted small fixes in simpledrm, bridge, accel, shmem-helper,
and the selftest of format-helper.
- Remove dummy resource when ttm bo is created, and during pipelined
gutting. Fix all drivers to accept a NULL ttm_bo->resource.
- Handle pinned BO moving prevention in ttm core.
- Set drm panel-bridge orientation before connector is registered.
- Remove dumb_destroy callback.
- Add documentation to GEM_CLOSE, PRIME_HANDLE_TO_FD, PRIME_FD_TO_HANDLE, GETFB2 ioctl's.
- Add atomic enable_plane callback, use it in ast, mgag200, tidss.
Driver Changes:
- Use drm_gem_objects_lookup in vc4.
- Assorted small fixes to virtio, ast, bridge/tc358762, meson, nouveau.
- Allow virtio KMS to be disabled and compiled out.
- Add Radxa 8/10HD, Samsung AMS495QA01 panels.
- Fix ivpu compiler errors.
- Assorted fixes to drm/panel, malidp, rockchip, ivpu, amdgpu, vgem,
nouveau, vc4.
- Assorted cleanups, simplifications and fixes to vmwgfx.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ac1f5186-54bb-02f4-ac56-907f5b76f3de@linux.intel.com
|
|
For the PSR to kick in, self_refresh_aware has to be set.
Initialize it based on the PSR support for the eDP interface.
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/524743/
Link: https://lore.kernel.org/r/1677774797-31063-15-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
self refresh
Populate the enocder software structure to reflect the updated
crtc appropriately during crtc enable/disable for a new commit
while taking care of the self refresh transitions when crtc
disable is triggered from the drm self refresh library.
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/524742/
Link: https://lore.kernel.org/r/1677774797-31063-14-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Enable PSR on eDP interface using drm self-refresh librabry.
This patch uses a trigger from self-refresh library to enter/exit
into PSR, when there are no updates from framework.
Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com>
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/524739/
Link: https://lore.kernel.org/r/1677774797-31063-13-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Use atomic variants for encoder callback functions such that
certain states like self-refresh can be accessed as part of
enable/disable sequence.
Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com>
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/524738/
Link: https://lore.kernel.org/r/1677774797-31063-12-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The eDP and DP interfaces shared the bridge operations and
the eDP specific changes were implemented under is_edp check.
To add psr support for eDP, we started using a new set of eDP
bridge ops. We are moving the eDP specific code in the
dp_bridge_mode_valid function to a new eDP function,
edp_bridge_mode_valid under the eDP bridge ops.
Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/524736/
Link: https://lore.kernel.org/r/1677774797-31063-11-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add support for basic panel self refresh (PSR) feature for eDP.
Add a new interface to set PSR state in the sink from DPU.
Program the eDP controller to issue PSR enter and exit SDP to
the sink.
Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/524734/
Link: https://lore.kernel.org/r/1677774797-31063-10-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Use atomic variants for DP bridge callback functions so that
the atomic state can be accessed in the interface drivers.
The atomic state will help the driver find out if the display
is in self refresh state.
Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/524731/
Link: https://lore.kernel.org/r/1677774797-31063-9-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Reset the datapath after disabling the timing gen, such that
it can start on a clean slate when the intf is enabled back.
This was a recommended sequence from the DPU HW programming guide.
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/524729/
Link: https://lore.kernel.org/r/1677774797-31063-8-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
There can be a race between timing gen disable and vblank irq. The
wait post timing gen disable may return early but intf disable sequence
might not be completed. Ensure that, intf status is disabled before
we retire the function.
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/524727/
Link: https://lore.kernel.org/r/1677774797-31063-7-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Recommended way of reading the interface timing gen status is via
status register. Timing gen status register will give a reliable status
of the interface especially during ON/OFF transitions. This support was
added from DPU version 5.0.0.
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/524724/
Link: https://lore.kernel.org/r/1677774797-31063-6-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
shared resources
According to KMS documentation, The driver must not release any shared
resources if active is set to false but enable still true.
Fixes: ccc862b957c6 ("drm/msm/dpu: Fix reservation failures in modeset")
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/524726/
Link: https://lore.kernel.org/r/1677774797-31063-5-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
This change will handle the psr entry exit cases in the panel
bridge atomic callback functions. For example, the panel power
should not turn off if the panel is entering psr.
Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Patchwork: https://patchwork.freedesktop.org/patch/524721/
Link: https://lore.kernel.org/r/1677774797-31063-4-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Use atomic variants for panel bridge callback functions such that
certain states like self-refresh can be accessed as part of
enable/disable sequence.
Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Patchwork: https://patchwork.freedesktop.org/patch/524720/
Link: https://lore.kernel.org/r/1677774797-31063-3-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add new helper functions, drm_atomic_get_old_crtc_for_encoder
and drm_atomic_get_new_crtc_for_encoder to retrieve the
corresponding crtc for the encoder.
Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Patchwork: https://patchwork.freedesktop.org/patch/524718/
Link: https://lore.kernel.org/r/1677774797-31063-2-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
|
|
This reverts part of commit 015b8cc5e7c4 ("wifi: cfg80211: Fix use after
free for wext")
This commit broke WPA offload by unconditionally clearing the crypto
modes for non-WEP connections. Drop that part of the patch.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reported-by: Ilya <me@0upti.me>
Reported-and-tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Fixes: 015b8cc5e7c4 ("wifi: cfg80211: Fix use after free for wext")
Cc: stable@kernel.org
Link: https://lore.kernel.org/linux-wireless/ZAx0TWRBlGfv7pNl@kroah.com/T/#m11e6e0915ab8fa19ce8bc9695ab288c0fe018edf
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"Two additional bug fixes for v6.3"
* tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: disable hwrng for fTPM on some AMD designs
tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address
|
|
AMD has issued an advisory indicating that having fTPM enabled in
BIOS can cause "stuttering" in the OS. This issue has been fixed
in newer versions of the fTPM firmware, but it's up to system
designers to decide whether to distribute it.
This issue has existed for a while, but is more prevalent starting
with kernel 6.1 because commit b006c439d58db ("hwrng: core - start
hwrng kthread also for untrusted sources") started to use the fTPM
for hwrng by default. However, all uses of /dev/hwrng result in
unacceptable stuttering.
So, simply disable registration of the defective hwrng when detecting
these faulty fTPM versions. As this is caused by faulty firmware, it
is plausible that such a problem could also be reproduced by other TPM
interactions, but this hasn't been shown by any user's testing or reports.
It is hypothesized to be triggered more frequently by the use of the RNG
because userspace software will fetch random numbers regularly.
Intentionally continue to register other TPM functionality so that users
that rely upon PCR measurements or any storage of data will still have
access to it. If it's found later that another TPM functionality is
exacerbating this problem a module parameter it can be turned off entirely
and a module parameter can be introduced to allow users who rely upon
fTPM functionality to turn it on even though this problem is present.
Link: https://www.amd.com/en/support/kb/faq/pa-410
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989
Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/
Fixes: b006c439d58d ("hwrng: core - start hwrng kthread also for untrusted sources")
Cc: stable@vger.kernel.org
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Tested-by: reach622@mailcuk.com
Tested-by: Bell <1138267643@qq.com>
Co-developed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
tpm_read_log_acpi() should return -ENODEV when no eventlog from the ACPI
table is found. If the firmware vendor includes an invalid log address
we are unable to map from the ACPI memory and tpm_read_log() returns -EIO
which would abort discovery of the eventlog.
Change the return value from -EIO to -ENODEV when acpi_os_map_iomem()
fails to map the event log.
The following hardware was used to test this issue:
Framework Laptop (Pre-production)
BIOS: INSYDE Corp, Revision: 3.2
TPM Device: NTC, Firmware Revision: 7.2
Dump of the faulty ACPI TPM2 table:
[000h 0000 4] Signature : "TPM2" [Trusted Platform Module hardware interface Table]
[004h 0004 4] Table Length : 0000004C
[008h 0008 1] Revision : 04
[009h 0009 1] Checksum : 2B
[00Ah 0010 6] Oem ID : "INSYDE"
[010h 0016 8] Oem Table ID : "TGL-ULT"
[018h 0024 4] Oem Revision : 00000002
[01Ch 0028 4] Asl Compiler ID : "ACPI"
[020h 0032 4] Asl Compiler Revision : 00040000
[024h 0036 2] Platform Class : 0000
[026h 0038 2] Reserved : 0000
[028h 0040 8] Control Address : 0000000000000000
[030h 0048 4] Start Method : 06 [Memory Mapped I/O]
[034h 0052 12] Method Parameters : 00 00 00 00 00 00 00 00 00 00 00 00
[040h 0064 4] Minimum Log Length : 00010000
[044h 0068 8] Log Address : 000000004053D000
Fixes: 0cf577a03f21 ("tpm: Fix handling of missing event log")
Tested-by: Erkki Eilonen <erkki@bearmetal.eu>
Signed-off-by: Morten Linderud <morten@linderud.pw>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Pull xfs fixes from Darrick Wong:
- Fix a crash if mount time quotacheck fails when there are inodes
queued for garbage collection.
- Fix an off by one error when discarding folios after writeback
failure.
* tag 'xfs-6.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix off-by-one-block in xfs_discard_folio()
xfs: quotacheck failure can race with background inode inactivation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes and removal from Greg KH:
"Here are four small staging driver fixes, and one big staging driver
deletion for 6.3-rc2.
The fixes are:
- rtl8192e driver fixes for where the driver was attempting to
execute various programs directly from the disk for unknown reasons
- rtl8723bs driver fixes for issues found by Hans in testing
The deleted driver is the removal of the r8188eu wireless driver as
now in 6.3-rc1 we have a "real" wifi driver for one that includes
support for many many more devices than this old driver did. So it's
time to remove it as it is no longer needed. The maintainers of this
driver all have acked its removal. Many thanks to them over the years
for working to clean it up and keep it working while the real driver
was being developed.
All of these have been in linux-next this week with no reported
problems"
* tag 'staging-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: delete driver
staging: rtl8723bs: Pass correct parameters to cfg80211_get_bss()
staging: rtl8723bs: Fix key-store index handling
staging: rtl8192e: Remove call_usermodehelper starting RadioPower.sh
staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a script
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
"A single erratum fix for AMD machines:
- Disable XSAVES on AMD Zen1 and Zen2 machines due to an erratum. No
impact to anything as those machines will fallback to XSAVEC which
is equivalent there"
* tag 'x86_urgent_for_v6.3_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Disable XSAVES on AMD family 0x17
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux
Pull clone3 fix from Christian Brauner:
"A simple fix for the clone3() system call.
The CLONE_NEWTIME allows the creation of time namespaces. The flag
reuses a bit from the CSIGNAL bits that are used in the legacy clone()
system call to set the signal that gets sent to the parent after the
child exits.
The clone3() system call doesn't rely on CSIGNAL anymore as it uses a
dedicated .exit_signal field in struct clone_args. So we blocked all
CSIGNAL bits in clone3_args_valid(). When CLONE_NEWTIME was introduced
and reused a CSIGNAL bit we forgot to adapt clone3_args_valid()
causing CLONE_NEWTIME with clone3() to be rejected. Fix this"
* tag 'kernel.fork.v6.3-rc2' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
selftests/clone3: test clone3 with CLONE_NEWTIME
fork: allow CLONE_NEWTIME in clone3 flags
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs fixes from Christian Brauner:
- When allocating pages for a watch queue failed, we didn't return an
error causing userspace to proceed even though all subsequent
notifcations would be lost. Make sure to return an error.
- Fix a misformed tree entry for the idmapping maintainers entry.
- When setting file leases from an idmapped mount via
generic_setlease() we need to take the idmapping into account
otherwise taking a lease would fail from an idmapped mount.
- Remove two redundant assignments, one in splice code and the other in
locks code, that static checkers complained about.
* tag 'vfs.misc.v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
filelocks: use mount idmapping for setlease permission check
fs/locks: Remove redundant assignment to cmd
splice: Remove redundant assignment to ret
MAINTAINERS: repair a malformed T: entry in IDMAPPED MOUNTS
watch_queue: fix IOC_WATCH_QUEUE_SET_SIZE alloc error paths
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Bug fixes and regressions for ext4, the most serious of which is a
potential deadlock during directory renames that was introduced during
the merge window discovered by a combination of syzbot and lockdep"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: zero i_disksize when initializing the bootloader inode
ext4: make sure fs error flag setted before clear journal error
ext4: commit super block if fs record error when journal record without error
ext4, jbd2: add an optimized bmap for the journal inode
ext4: fix WARNING in ext4_update_inline_data
ext4: move where set the MAY_INLINE_DATA flag is set
ext4: Fix deadlock during directory rename
ext4: Fix comment about the 64BIT feature
docs: ext4: modify the group desc size to 64
ext4: fix another off-by-one fsmap error on 1k block filesystems
ext4: fix RENAME_WHITEOUT handling for inline directories
ext4: make kobj_type structures constant
ext4: fix cgroup writeback accounting with fs-layer encryption
|
|
The cpumask_check() was unnecessarily tight, and causes problems for the
users of cpumask_next().
We have a number of users that take the previous return value of one of
the bit scanning functions and subtract one to keep it in "range". But
since the scanning functions end up returning up to 'small_cpumask_bits'
instead of the tighter 'nr_cpumask_bits', the range really needs to be
using that widened form.
[ This "previous-1" behavior is also the reason we have all those
comments about /* -1 is a legal arg here. */ and separate checks for
that being ok. So we could have just made "small_cpumask_bits-1"
be a similar special "don't check this" value.
Tetsuo Handa even suggested a patch that only does that for
cpumask_next(), since that seems to be the only actual case that
triggers, but that all makes it even _more_ magical and special. So
just relax the check ]
One example of this kind of pattern being the 'c_start()' function in
arch/x86/kernel/cpu/proc.c, but also duplicated in various forms on
other architectures.
Reported-by: syzbot+96cae094d90877641f32@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=96cae094d90877641f32
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Link: https://lore.kernel.org/lkml/c1f4cc16-feea-b83c-82cf-1a1f007b7eb9@I-love.SAKURA.ne.jp/
Fixes: 596ff4a09b89 ("cpumask: re-introduce constant-sized cpumask optimizations")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"This marks the end of a transition to let I2C have the same probe
semantics as other subsystems. Uwe took care that no drivers in the
current tree nor in -next use the deprecated .probe call. So, it is a
good time to switch to the new, standard semantics now.
There is also a regression fix:
- regression fix for the notifier handling of the I2C core
- final coversions of drivers away from deprecated .probe
- make .probe_new the standard probe and convert I2C core to use it
* tag 'i2c-for-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: dev: Fix bus callback return values
i2c: Convert drivers to new .probe() callback
i2c: mux: Convert all drivers to new .probe() callback
i2c: Switch .probe() to not take an id parameter
media: i2c: ov2685: convert to i2c's .probe_new()
media: i2c: ov5695: convert to i2c's .probe_new()
w1: ds2482: Convert to i2c's .probe_new()
serial: sc16is7xx: Convert to i2c's .probe_new()
mtd: maps: pismo: Convert to i2c's .probe_new()
misc: ad525x_dpot-i2c: Convert to i2c's .probe_new()
|
|
Switching to BLK_MQ_F_BLOCKING wrongly removed the call to
blk_mq_end_request(). Add it back to have our IOs finished
Fixes: 91cc8fbcc8c7 ("ubi: block: set BLK_MQ_F_BLOCKING")
Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/linux-mtd/CAHk-=wi29bbBNh3RqJKu3PxzpjDN5D5K17gEVtXrb7-6bfrnMQ@mail.gmail.com/
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If the boot loader inode has never been used before, the
EXT4_IOC_SWAP_BOOT inode will initialize it, including setting the
i_size to 0. However, if the "never before used" boot loader has a
non-zero i_size, then i_disksize will be non-zero, and the
inconsistency between i_size and i_disksize can trigger a kernel
warning:
WARNING: CPU: 0 PID: 2580 at fs/ext4/file.c:319
CPU: 0 PID: 2580 Comm: bb Not tainted 6.3.0-rc1-00004-g703695902cfa
RIP: 0010:ext4_file_write_iter+0xbc7/0xd10
Call Trace:
vfs_write+0x3b1/0x5c0
ksys_write+0x77/0x160
__x64_sys_write+0x22/0x30
do_syscall_64+0x39/0x80
Reproducer:
1. create corrupted image and mount it:
mke2fs -t ext4 /tmp/foo.img 200
debugfs -wR "sif <5> size 25700" /tmp/foo.img
mount -t ext4 /tmp/foo.img /mnt
cd /mnt
echo 123 > file
2. Run the reproducer program:
posix_memalign(&buf, 1024, 1024)
fd = open("file", O_RDWR | O_DIRECT);
ioctl(fd, EXT4_IOC_SWAP_BOOT);
write(fd, buf, 1024);
Fix this by setting i_disksize as well as i_size to zero when
initiaizing the boot loader inode.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217159
Cc: stable@kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://lore.kernel.org/r/20230308032643.641113-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|