summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-03-11wifi: iwlwifi: mvm: fix setting the TK when associatedAvraham Stern
When running secured ranging and the initiator is associated with the responder, the TK was not set in the range request command. Fix it. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308231427.603dc31579d9.Icd19d797e56483c08dd22c55b96fee481c4d2f3d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: iwlwifi: don't warn when if there is a FW errorMiri Korenblit
iwl_trans_reclaim is warning if it is called when the FW is not alive. But if it is called when there is a pending restart, i.e. after a FW error, there is no need to warn, instead - return silently. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308231427.ba3d90b22c25.I9332506af1997faefcf0bdb51d98d5e874051722@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: iwlwifi: bump minimum API version in BZ/SC to 93Miri Korenblit
Stop supporting older FWs. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308231427.73e962ca3e6c.I942fa8cafc1791b9330ad18e2599fae11d7b3336@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: iwlwifi: bump FW API to 98 for BZ/SC/DR devicesMiri Korenblit
Start supporting API versions 97 and 98 for those devices. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308231427.55b5455795aa.I333f1e7fa31f9da1d40f668660c1e25b93ff469e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: iwlwifi: mvm: Fix bit size calculation in iwl_dbgfs_tas_get_status_readPagadala Yesu Anjaneyulu
Corrected the bit size calculation in the for_each_set_bit macro in the iwl_dbgfs_tas_get_status_read(). The previous implementation used sizeof(dyn_status), which only accounts for the number of bytes. This has been updated to TAS_DYNA_STATUS_MAX to ensure the loop iterates over the correct number of valid bits in dyn_status. Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308231427.65d373e4a10e.If2cea63035333b07849e5a2c2a4f5dc5c5239595@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: iwlwifi: w/a FW SMPS mode selectionDaniel Gabay
The FW is now responsible of determining the SMPS mode. If the user disabled power save in a certain vif, we send the vif-level power command to clear out the POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK bit for that vif. But erroneously, the FW checks DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK in the device-level command to determine the SMPS mode. To W/A this, send also the device-level command when the power save of a vif changes, and disable power save if there is any vif that has power save disabled. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308231427.7bf205efa027.I2c793ff1fc2a6779a95faaee1ded348100fd97f1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: iwlwifi: fix debug actions orderJohannes Berg
The order of actions taken for debug was implemented incorrectly. Now we implemented the dump split and do the FW reset only in the middle of the dump (rather than the FW killing itself on error.) As a result, some of the actions taken when applying the config will now crash the device, so we need to fix the order. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308231427.6de7fa8e63ed.I40632c48e2a67a8aca05def572a934b88ce7934b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: iwlwifi: mark Br device not integratedJohannes Berg
This is a discrete device, don't mark it as integrated. This also means we cannot set the LTR delay. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308231427.9bb69393fcc9.I197129383e5441c8139cbb0e810ae0b71198a37c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: iwlwifi: Add new TAS disable reason for invalid table sourcePagadala Yesu Anjaneyulu
The new reason is added to the iwl_tas_statically_disabled_reason enum and the corresponding message is updated in the iwl_dbgfs_tas_get_status_read(). Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308231427.5e1272ef3508.I24f668ae716bee20cba15fdc73c3363693bbaf73@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: iwlwifi: mvm: cleanup of TAS structure and enumsPagadala Yesu Anjaneyulu
Removed mvm prefix from the following structures and enum names: 1. struct iwl_tas_status_per_mac 2. struct iwl_tas_status_resp 3. enum iwl_tas_dyna_status 4. enum iwl_tas_statically_disabled_reason As these structures and enums are not specific to mvm. Replaced TAS_LMAC_BAND_LB, TAS_LMAC_BAND_HB, and TAS_LMAC_BAND_UHB macros with a generic BAND macro, as these macros are not specific to TAS. Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308231427.59144bee9987.Ic2678dcb5afdacc2ca234d4aa4901e7e1f6e8dbb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: iwlwifi: fix print for ECKVEmmanuel Grumbach
The print was obviously wrong. We are handling ECKV and not WRDD in this function. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308231426.e006c6b21432.I318fed724709f9ee7a0c369e1cf5e1038ddd546a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: iwlwifi: fix the ECKV UEFI variable nameEmmanuel Grumbach
This UEFI variable name was badly named. Fix its name and also use the right GUID to find it: we need to use the BT_WIFI (a.k.a. Common) GUID. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308231426.78c998d0fa71.I2bc9d72c1dc2c4d7028f0265634a940c2fadbbb5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: iwlwifi: add support for BE213Emmanuel Grumbach
Add the BE213 device. This is just like BE211 but with a limitation on the bandwidth. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308231426.f02f4d7fc73b.Idaf000dd311358e3b50a511f4efc1cc720abd58b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: mac80211: set WMM in ML reconfigurationJohannes Berg
In the per-STA profiles for added links in multi-link reconfiguration the WMM element should be included. Fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308225541.59902f783420.I362c3101d3f523a8db37c16cd7b5f573d76a36e6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: mac80211: don't include MLE in ML reconf per-STA profileJohannes Berg
In the multi-link reconfiguration frame, the per-STA profile for added links shouldn't include the multi-link element. Set the association ID to an invalid value, so it doesn't erroneously match the link ID if that happens to be zero. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308225541.8e5be244c70f.I3472cd5c347814ee3600869a88488997bcd43224@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: mac80211: fix ML reconf reset in disconnectJohannes Berg
If disconnecting while ML reconfiguration is in progress, the data isn't freed because the reset call is too late, after the vif already switches to non-MLD. Move the call to fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308225541.abaea69cde42.I7e6b35731ded94fc2d68a2d4ecf81873712c268e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: mac80211: Notify cfg80211 about added link addressesIlan Peer
When ML reconfiguration is done and new links are added, update cfg80211 with the addresses of the newly added links. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308225541.0c6bf8b1bef3.I2aa16801f07321a580dd7dce4a074a3486f627f1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: cfg80211: Update the link address when a link is addedIlan Peer
When links are added, update the wireless device link addresses based on the information provided by the driver. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308225541.d694a9125aba.I79b010ea9aab47893e4f22c266362fde30b7f9ac@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: mac80211: fix warning on disconnect during failed ML reconfJohannes Berg
If multi-link reconfiguration fails, we can disconnect with a local link already allocated but the BSS entry not assigned yet, which leads to a warning in cfg80211. Add a check to avoid the warning. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308225541.699bd9cbabe5.I599d5ff69092a65e916e2acd25137ae9df8debe8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: mac80211: fix userspace_selectors corruptionJohannes Berg
Spotted during code review, the selectors need to be large enough for a 128-bit bitmap, not a single unsigned long, otherwise we have stack corruption. We should also allow passing selectors from userspace, but that should be a separate change. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308225541.8f1bcf96a504.Ibeb8970c82a30c97279a4cc4e68faca5df1813a5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: mac80211_hwsim: Fix MLD address translationIlan Peer
Do address translations only between shared links. It is possible that while an non-AP MLD station and an AP MLD station have shared links, the frame is intended to be sent on a link which is not shared (for example when sending a probe response). Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308225541.1aa461270bb6.Ic21592e1b1634653f02b80628cb2152f6e9de367@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: mac80211: allow 320 MHz FTM measurementsAvraham Stern
Add 320 MHz to the list of allowed bandwidths for FTM measurements. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308225541.91f4cbe66817.I9205c585fca6a54a2c5a9e4db98c7781bd1fc4e1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: cfg80211: improve supported_selector documentationJohannes Berg
Improve the documentation for supported BSS selectors to make it more precise. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308225541.ba402ff47314.I502b56111b62ea0be174ae76bd03684ae1d4aefb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: mac80211: fix U-APSD check in ML reconfigurationJohannes Berg
If U-APSD isn't enabled by us, then IEEE80211_STA_UAPSD_ENABLED won't be set, but the AP can still support it in that case. Only require U-APSD from the AP if we enabled it, don't require it to be disabled on the AP if we didn't. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308225541.b4674be12a38.I01959e448c6a2a3e8bc5d561bbae9e8d2cca616a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: cfg80211: allow IR in 20 MHz configurationsAnjaneyulu
Some regulatory bodies doesn't allow IR (initiate radioation) on a specific subband, but allows it for channels with a bandwidth of 20 MHz. Add a channel flag that indicates that, and consider it in cfg80211_reg_check_beaconing. While on it, fix the kernel doc of enum nl80211_reg_rule_flags and change it to use BIT(). Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com> Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308225541.d3ab352a73ff.I8a8f79e1c9eb74936929463960ee2a324712fe51@changeid [fix typo] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: mac80211: mlme: support extended MLD capa/ops in assocJohannes Berg
Support passing the value from userspace on to the AP in the association and ML link reconfiguration requests. We may need to also add a driver value to or in with the field, but for now have no feature that is controlled by the driver. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308225541.2e555beb0a76.I623f59023b47ec202fc0c7520f2b5f575b439927@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: cfg80211: allow setting extended MLD capa/opsJohannes Berg
Some extended MLD capabilities and operations bits (currently the "BTM MLD Recommendataion For Multiple APs Support" bit) may depend on userspace capabilities. Allow userspace to pass the values for this field that it supports to the association and link reconfiguration operations. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Link: https://patch.msgid.link/20250308225541.bd52078b5f65.I4dd8f53b0030db7ea87a2e0920989e7e2c7b5345@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: cfg80211: move link reconfig parameters into a structJohannes Berg
Add a new struct cfg80211_ml_reconf_req to collect the link reconfiguration parameters. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308225541.0cf299c1fdd0.Id1a3b1092dc52d0d3731a8798522fdf2e052bf0b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-07wifi: wfx: allow to enable WoWLAN using NL80211Jérôme Pouiller
It is possible to use nl80211 to request to the driver to do allow the required bus configuration to wake-up the host. This patch implements the required API for nl80211. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://patch.msgid.link/20250304153224.39083-6-jerome.pouiller@silabs.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-07wifi: wfx: allow SDIO device to wake up the hostJérôme Pouiller
If the device is connected with SDIO bus, it can wake up the host using either the SDIO controller (that requires MMC_PM_WAKE_SDIO_IRQ capability) or the out-of-bound IRQ. This patch allows both. Obviously, the SDIO controller must be able to keep the SDIO device powered on. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://patch.msgid.link/20250304153224.39083-5-jerome.pouiller@silabs.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-07wifi: wfx: allow SPI device to wake up the hostJérôme Pouiller
When the host is asleep, the device has wake up the host using the usual SPI IRQ. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://patch.msgid.link/20250304153224.39083-4-jerome.pouiller@silabs.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-07wifi: wfx: declare support for WoWLANJérôme Pouiller
WF200 is able to keep the connection with the AP alive while the host is asleep. So, let's expose this capability to the user. For now, we don't provide any way to control the device filtering features. The user has to allow wake-up on any received packets and on disconnections. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://patch.msgid.link/20250304153224.39083-3-jerome.pouiller@silabs.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-07wifi: wfx: align declarations between bus_spi.c and bus_sdio.cJérôme Pouiller
Just declare fields in the same order in bus_spi.c and bus_sdio.c Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://patch.msgid.link/20250304153224.39083-2-jerome.pouiller@silabs.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-07wifi: iwlegacy: avoid size increaseArnd Bergmann
My previous patch caused a slight code size increase when DEBUG_FS is disabled, as Stanislaw Gruszka pointed out. Fix this with an added IS_ENABLED() check. Fixes: cf6b9ba172dd ("wifi: iwlegacy: don't warn for unused variables with DEBUG_FS=n") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Link: https://patch.msgid.link/20250304144210.997531-1-arnd@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-07Merge tag 'ath-next-20250305' of ↵Johannes Berg
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath Jeff Johnson says: ==================== ath.git patches for v6.15 This development cycle again featured multiple patchsets to ath12k to support the new 802.11be MLO feature. In addition, there was the usual set of bug fixes and cleanups. ==================== Link: https://lore.kernel.org/linux-wireless/d01b1976-ebe8-48cd-8f49-32bfa00bed7e@oss.qualcomm.com/ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-05wifi: iwlwifi: add iwlmld sub-driverMiri Korenblit
iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-04Merge tag 'wireless-next-2025-03-04-v2' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== First 6.15 material: * cfg80211/mac80211 - remove cooked monitor support - strict mode for better AP testing - basic EPCS support - OMI RX bandwidth reduction support * rtw88 - preparation for RTL8814AU support * rtw89 - use wiphy_lock/wiphy_work - preparations for MLO - BT-Coex improvements - regulatory support in firmware files * iwlwifi - preparations for the new iwlmld sub-driver * tag 'wireless-next-2025-03-04-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (128 commits) wifi: iwlwifi: remove mld/roc.c wifi: mac80211: refactor populating mesh related fields in sinfo wifi: cfg80211: reorg sinfo structure elements for mesh wifi: iwlwifi: Fix spelling mistake "Increate" -> "Increase" wifi: iwlwifi: add Debug Host Command APIs wifi: iwlwifi: add IWL_MAX_NUM_IGTKS macro wifi: iwlwifi: add OMI bandwidth reduction APIs wifi: iwlwifi: remove mvm prefix from iwl_mvm_d3_end_notif wifi: iwlwifi: remember if the UATS table was read successfully wifi: iwlwifi: export iwl_get_lari_config_bitmap wifi: iwlwifi: add support for external 32 KHz clock wifi: iwlwifi: mld: add a debug level for EHT prints wifi: iwlwifi: mld: add a debug level for PTP prints wifi: iwlwifi: remove mvm prefix from iwl_mvm_esr_mode_notif wifi: iwlwifi: use 0xff instead of 0xffffffff for invalid wifi: iwlwifi: location api cleanup wifi: cfg80211: expose update timestamp to drivers wifi: mac80211: add ieee80211_iter_chan_contexts_mtx wifi: mac80211: fix integer overflow in hwmp_route_info_get() wifi: mac80211: Fix possible integer promotion issue ... ==================== Link: https://patch.msgid.link/20250304125605.127914-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-04Merge branch 'netconsole-add-taskname-sysdata-support'Paolo Abeni
Breno Leitao says: ==================== netconsole: Add taskname sysdata support This patchset introduces a new feature to the netconsole extradata subsystem that enables the inclusion of the current task's name in the sysdata output of netconsole messages. This enhancement is particularly valuable for large-scale deployments, such as Meta's, where netconsole collects messages from millions of servers and stores them in a data warehouse for analysis. Engineers often rely on these messages to investigate issues and assess kernel health. One common challenge we face is determining the context in which a particular message was generated. By including the task name (task->comm) with each message, this feature provides a direct answer to the frequently asked question: "What was running when this message was generated?" This added context will significantly improve our ability to diagnose and troubleshoot issues, making it easier to interpret output of netconsole. The patchset consists of seven patches that implement the following changes: * Refactor CPU number formatting into a separate function * Prefix CPU_NR sysdata feature with SYSDATA_ * Patch to covert a bitwise operation into boolean * Add configfs controls for taskname sysdata feature * Add taskname to extradata entry count * Add support for including task name in netconsole's extra data output * Document the task name feature in Documentation/networking/netconsole.rst * Add test coverage for the task name feature to the existing sysdata selftest script These changes allow users to enable or disable the task name feature via configfs and provide additional context for kernel messages by showing which task generated each console message. I have tested these patches on some servers and they seem to work as expected. v1: https://lore.kernel.org/r/20250221-netcons_current-v1-0-21c86ae8fc0d@debian.org Signed-off-by: Breno Leitao <leitao@debian.org> ==================== Link: https://patch.msgid.link/20250228-netcons_current-v2-0-f53ff79a0db2@debian.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04netconsole: selftest: add task name append testingBreno Leitao
Add test coverage for the netconsole task name feature to the existing sysdata selftest script. This extends the test infrastructure to verify that task names are correctly appended when enabled and absent when disabled. The test validates that: - Task names appear in the expected format "taskname=<name>" - Task names are included when the feature is enabled - Task names are excluded when the feature is disabled - The feature works correctly alongside other sysdata fields like CPU Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04netconsole: docs: document the task name featureBreno Leitao
Add documentation for the netconsole task name feature in Documentation/networking/netconsole.rst. This explains how to enable task name via configfs and demonstrates the output format. The documentation includes: - How to enable/disable the feature via taskname_enabled - The format of the task name in the output - An example showing the task name appearing in messages Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04netconsole: add task name to extra data fieldsBreno Leitao
This is the core patch for this whole patchset. Add support for including the current task's name in netconsole's extra data output. This adds a new append_taskname() function that writes the task name (from current->comm) into the target's extradata buffer, similar to how CPU numbers are handled. The task name is included when the SYSDATA_TASKNAME field is set, appearing in the format "taskname=<name>" in the output. This additional context can help with debugging by showing which task generated each console message. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04netconsole: add configfs controls for taskname sysdata featureBreno Leitao
Add configfs interface to enable/disable the taskname sysdata feature. This adds the following functionality: The implementation follows the same pattern as the existing CPU number feature, ensuring consistent behavior and error handling across sysdata features. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04netconsole: add taskname to extradata entry countBreno Leitao
New SYSDATA_TASKNAME feature flag to track when taskname append is enabled. Additional check in count_extradata_entries() to include taskname in total, counting it as an entry in extradata. This function is used to check if we are not overflowing the number of extradata items. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04netconsole: refactor CPU number formatting into separate functionBreno Leitao
Extract CPU number formatting logic from prepare_extradata() into a new append_cpu_nr() function. This refactoring improves code organization by isolating CPU number formatting into its own function while reducing the complexity of prepare_extradata(). The change prepares the codebase for the upcoming taskname feature by establishing a consistent pattern for handling sysdata features. The CPU number formatting logic itself remains unchanged; only its location has moved to improve maintainability. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04netconsole: Make boolean comparison consistentBreno Leitao
Convert the current state assignment to use explicit boolean conversion, making the code more robust and easier to read. This change adds a double-negation operator to ensure consistent boolean conversion as suggested by Paolo[1]. This approach aligns with the existing pattern used in sysdata_cpu_nr_enabled_show(). Link: https://lore.kernel.org/all/7309e760-63b0-4b58-ad33-2fb8db361141@redhat.com/ [1] Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04netconsole: prefix CPU_NR sysdata feature with SYSDATA_Breno Leitao
Rename the CPU_NR enum value to SYSDATA_CPU_NR to establish a consistent naming convention for sysdata features. This change prepares for upcoming additions to the sysdata feature set by clearly grouping related features under the SYSDATA prefix. This change is purely cosmetic and does not modify any functionality. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04wifi: iwlwifi: remove mld/roc.cJohannes Berg
This file should never have been part of the commit, remove it. Fixes: af3be9088404 ("wifi: iwlwifi: support ROC version 6") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-04Merge branch 'support-some-enhances-features-for-the-hibmcge-driver'Paolo Abeni
Jijie Shao says: ==================== Support some enhances features for the HIBMCGE driver In this patch set, we mainly implement some enhanced features. It mainly includes the statistics, diagnosis, and ioctl to improve fault locating efficiency, abnormal irq and MAC link exception handling feature to enhance driver robustness, and rx checksum offload feature to improve performance (tx checksum feature has been implemented). v3: https://lore.kernel.org/all/20250221115526.1082660-2-shaojijie@huawei.com/ v2: https://lore.kernel.org/all/20250218085829.3172126-1-shaojijie@huawei.com/ v1: https://lore.kernel.org/all/20250213035529.2402283-1-shaojijie@huawei.com/ ==================== Link: https://patch.msgid.link/20250228115411.1750803-1-shaojijie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04net: hibmcge: Add support for ioctlJijie Shao
This patch implements the .ndo_eth_ioctl() to read and write the PHY register. Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04net: hibmcge: Add support for BMC diagnose featureJijie Shao
The MAC hardware is on the BMC side, and the driver is on the host side. When the driver is abnormal, the BMC cannot directly detect the exception cause. Therefore, this patch implements the BMC diagnosis feature. When users query driver diagnosis information on the BMC, the driver detects the query request in the scheduled task and reports driver statistics and link status to the BMC through the bar space. The BMC collects logs to analyze exception causes. Currently, the scheduled task is executed every 30 seconds To quickly respond to user query requests, this patch changes the scheduled task to once every second. Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit (git 2.34.1) at 2025-07-16 18:06:02 +0000