summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-01-17net/mlx5: fix unintentional sign extension on shift of dest_attr->vport.vhca_idColin Ian King
Shifting dest_attr->vport.vhca_id << 16 results in a promotion from an unsigned 16 bit integer to a 32 bit signed integer, this is then sign extended to a 64 bit unsigned long on 64 bitarchitectures. If vhca_id is greater than 0x7fff then this leads to a sign extended result where all the upper 32 bits of idx are set to 1. Fix this by casting vhca_id to the same type as idx before performing the shift. Fixes: 8e2e08a6d1e0 ("net/mlx5: fs, add support for dest vport HWS action") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Moshe Shemesh <moshe@nvidia.com> Link: https://patch.msgid.link/20250116181700.96437-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17net: tc: improve qdisc error messagesJohn Ousterhout
The existing error message ("Invalid qdisc name") is confusing because it suggests that there is no qdisc with the given name. In fact, the name does refer to a valid qdisc, but it doesn't match the kind of an existing qdisc being modified or replaced. The new error message provides more detail to eliminate confusion. Signed-off-by: John Ousterhout <ouster@cs.stanford.edu> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20250116195642.2794-1-ouster@cs.stanford.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== ice: support FW Recovery Mode Konrad Knitter says: Enable update of card in FW Recovery Mode * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: support FW Recovery Mode devlink: add devl guard pldmfw: enable selected component update ==================== Link: https://patch.msgid.link/20250116212059.1254349-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17hv_netvsc: Replace one-element array with flexible array memberThorsten Blum
Replace the deprecated one-element array with a modern flexible array member in the struct nvsp_1_message_send_receive_buffer_complete. Use struct_size_t(,,1) instead of sizeof() to maintain the same size. Compile-tested only. Link: https://github.com/KSPP/linux/issues/79 Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Tested-by: Roman Kisel <romank@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://patch.msgid.link/20250116211932.139564-2-thorsten.blum@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17gtp: Prepare ip4_route_output_gtp() to .flowi4_tos conversion.Guillaume Nault
Use inet_sk_dscp() to get the socket DSCP value as dscp_t, instead of ip_sock_rt_tos() which returns a __u8. This will ease the conversion of fl4->flowi4_tos to dscp_t, which now just becomes a matter of dropping the inet_dscp_to_dsfield() call. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/06bdb310a075355ff059cd32da2efc29a63981c9.1737034675.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17dccp: Prepare dccp_v4_route_skb() to .flowi4_tos conversion.Guillaume Nault
Use inet_sk_dscp() to get the socket DSCP value as dscp_t, instead of ip_sock_rt_tos() which returns a __u8. This will ease the conversion of fl4->flowi4_tos to dscp_t, which now just becomes a matter of dropping the inet_dscp_to_dsfield() call. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/208dc5ca28bb5595d7a545de026bba18b1d63bda.1737032802.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17selftests: net: give up on the cmsg_time accuracy on slow machinesJakub Kicinski
Commit b9d5f5711dd8 ("selftests: net: increase the delay for relative cmsg_time.sh test") widened the accepted value range 8x but we still see flakes (at a rate of around 7%). Return XFAIL for the most timing sensitive test on slow machines. Before: # ./cmsg_time.sh Case UDPv4 - TXTIME rel returned '8074us - 7397us < 4000', expected 'OK' FAIL - 1/36 cases failed After: # ./cmsg_time.sh Case UDPv4 - TXTIME rel returned '1123us - 941us < 500', expected 'OK' (XFAIL) Case UDPv6 - TXTIME rel returned '1227us - 776us < 500', expected 'OK' (XFAIL) OK Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250116020105.931338-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16Merge branch 'add-perout-library-for-rds-ptp-supported-phys'Jakub Kicinski
Divya Koppera says: ==================== Add PEROUT library for RDS PTP supported phys Adds support for PEROUT library, where phy can generate periodic output signal on supported pin out. ==================== Link: https://patch.msgid.link/20250115090634.12941-1-divya.koppera@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16net: phy: microchip_rds_ptp : Add PEROUT feature library for RDS PTP ↵Divya Koppera
supported Microchip phys Adds PEROUT feature for RDS PTP supported phys where we can generate periodic output signal on supported pin out Signed-off-by: Divya Koppera <divya.koppera@microchip.com> Link: https://patch.msgid.link/20250115090634.12941-4-divya.koppera@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16net: phy: microchip_t1: Enable pin out specific to lan887x phy for PEROUT signalDivya Koppera
Adds support for enabling pin out that is required to generate periodic output signal on lan887x phy. Signed-off-by: Divya Koppera <divya.koppera@microchip.com> Link: https://patch.msgid.link/20250115090634.12941-3-divya.koppera@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16net: phy: microchip_rds_ptp: Header file library changes for PEROUTDivya Koppera
This ptp header file library changes will cover PEROUT macros that are required to generate periodic output from pin out Signed-off-by: Divya Koppera <divya.koppera@microchip.com> Link: https://patch.msgid.link/20250115090634.12941-2-divya.koppera@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16selftests/net: packetdrill: make tcp buf limited timing tests benignJakub Kicinski
The following tests are failing on debug kernels: tcp_tcp_info_tcp-info-rwnd-limited.pkt tcp_tcp_info_tcp-info-sndbuf-limited.pkt with reports like: assert 19000 <= tcpi_sndbuf_limited <= 21000, tcpi_sndbuf_limited; \ AssertionError: 18000 and: assert 348000 <= tcpi_busy_time <= 360000, tcpi_busy_time AssertionError: 362000 Extend commit 912d6f669725 ("selftests/net: packetdrill: report benign debug flakes as xfail") to cover them. Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250115232129.845884-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16Merge branch 'net-add-phylink-managed-eee-support'Jakub Kicinski
Russell King says: ==================== net: add phylink managed EEE support Adding managed EEE support to phylink has been on the cards ever since the idea in phylib was mooted. This overly large series attempts to do so. I've included all the patches as it's important to get the driver patches out there. Patch 1 adds a definition for the clock stop capable bit in the PCS MMD status register. Patch 2 adds a phylib API to query whether the PHY allows the transmit xMII clock to be stopped while in LPI mode. This capability is for MAC drivers to save power when LPI is active, to allow them to stop their transmit clock. Patch 3 extracts a phylink internal helper for determining whether the link is up. Patch 4 adds basic phylink managed EEE support. Two new MAC APIs are added, to enable and disable LPI. The enable method is passed the LPI timer setting which it is expected to program into the hardware, and also a flag ehther the transmit clock should be stopped. I have taken the decision to make enable_tx_lpi() to return an error code, but not do much with it other than report it - the intention being that we can later use it to extend functionality if needed without reworking loads of drivers. I have also dropped the validation/limitation of the LPI timer, and left that in the driver code prior to calling phylink_ethtool_set_eee(). The remainder of the patches convert mvneta, lan743x and stmmac, and add support for mvneta. ==================== Link: https://patch.msgid.link/Z4gdtOaGsBhQCZXn@shell.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16net: stmmac: convert to phylink managed EEE supportRussell King (Oracle)
Convert stmmac to use phylink managed EEE support rather than delving into phylib: 1. Move the stmmac_eee_init() calls out of mac_link_down() and mac_link_up() methods into the new mac_{enable,disable}_lpi() methods. We leave the calls to stmmac_set_eee_pls() in place as these change bits which tell the EEE hardware when the link came up or down, and is used for a separate hardware timer. However, symmetrically conditionalise this with priv->dma_cap.eee. 2. Update the current LPI timer each time LPI is enabled - which we need for software-timed LPI. 3. With phylink managed EEE, phylink manages the receive clock stop configuration via phylink_config.eee_rx_clk_stop_enable. Set this appropriately which makes the call to phy_eee_rx_clock_stop() redundant. 4. From what I can work out, all supported interfaces support LPI signalling on stmmac (there's no restriction implemented.) It also appears to support LPI at all full duplex speeds at or over 100M. Set these capabilities. 5. The default timer appears to be derived from a module parameter. Set this the same, although we keep code that reconfigures the timer in stmmac_init_phy(). 6. Remove the direct call to phy_support_eee(), which phylink will do on the drivers behalf if phylink_config.eee_enabled_default is set. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/E1tYAEG-0014QH-9O@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16net: lan743x: convert to phylink managed EEERussell King (Oracle)
Convert lan743x to phylink managed EEE: - Set the lpi_capabilties. - Move the call to lan743x_mac_eee_enable() into the enable/disable tx_lpi functions. - Ensure that EEEEN is clear during probe. - Move the setting of the LPI timer into mac_enable_tx_lpi(). - Move reading of LPI timer to phylink initialisation to set the default timer value. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/E1tYAEB-0014QB-4s@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16net: lan743x: use netdev in lan743x_phylink_mac_link_down()Russell King (Oracle)
Use the netdev that we already have in lan743x_phylink_mac_link_down(). Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/E1tYAE5-0014Q5-Up@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16net: mvpp2: add EEE implementationRussell King (Oracle)
Add EEE support for mvpp2, using phylink's EEE implementation, which means we just need to implement the two methods for LPI control, and with the initial configuration. Only SGMII mode is supported, so only 100M and 1G speeds. Disabling LPI requires clearing a single bit. Enabling LPI needs a full configuration of several values, as the timer values are dependent on the MAC operating speed. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/E1tYAE0-0014Pz-R9@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16net: mvneta: convert to phylink EEE implementationRussell King (Oracle)
Convert mvneta to use phylink's EEE implementation by implementing the two LPI control methods, and adding the initial configuration and capabilities. Although disabling LPI requires clearing a single bit, for safety we clear the manual mode and force bits to ensure that auto mode will be used. Enabling LPI needs a full configuration of several values, as the timer values are dependent on the MAC operating speed, as per the original code. As Armada 388 states that EEE is only supported in "SGMII" modes, mark this in lpi_interfaces. Testing with RGMII on the Clearfog platform indicates that the receive path fails to detect LPI over RGMII. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/E1tYADv-0014Pt-NO@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16net: phylink: add EEE managementRussell King (Oracle)
Add EEE management to phylink, making use of the phylib implementation. This will only be used where a MAC driver populates the methods and capabilities bitfield, otherwise we keep our old behaviour. Phylink will keep track of the EEE configuration, including the clock stop abilities at each end of the MAC to PHY link, programming the PHY appropriately and preserving the LPI configuration should the PHY go away. Phylink will call into the MAC driver when LPI needs to be enabled or disabled, with the requirement that the MAC have LPI disabled prior to the netdev being brought up (in other words, it will only call mac_disable_tx_lpi() if it has already called mac_enable_tx_lpi().) Support for phylink managed EEE is enabled by populating both tx_lpi MAC operations method pointers, and filling in both LPI interfaces and capabilities. If the methods are provided but the LPI interfaces or capabilities remain empty, this indicates to phylink that EEE is implemented by the driver but the hardware it is driving does not support EEE, and thus the ethtool set_eee() and get_eee() methods will return EOPNOTSUPP. No validation of the LPI timer value is performed by this patch. For interface modes which do not support LPI, we make no attempt to manipulate the phylib EEE advertisement, but instead refuse to activate LPI at the MAC, noting it at debug message level. We also restrict the advertisement and reported userspace support linkmode masks according to the lpi_capabilities provided to phylink by the MAC driver. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/E1tYADq-0014Pn-J1@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16net: phylink: add phylink_link_is_up() helperRussell King (Oracle)
Add a helper to determine whether the link is up or down. Currently this is only used in one location, but becomes necessary to test when reconfiguring EEE. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/E1tYADl-0014Ph-EV@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16net: phy: add support for querying PHY clock stop capabilityRussell King (Oracle)
Add support for querying whether the PHY allows the transmit xMII clock to be stopped while in LPI mode. This will be used by phylink to pass to the MAC driver so it can configure the generation of the xMII clock appropriately. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/E1tYADg-0014Pb-AJ@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16net: mdio: add definition for clock stop capable bitRussell King (Oracle)
Add a definition for the clock stop capable bit in the PCS MMD. This bit indicates whether the MAC is able to stop the transmit xMII clock while it is signalling LPI. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/E1tYADb-0014PV-6T@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16Merge branch 'dev-covnert-dev_change_name-to-per-netns-rtnl'Jakub Kicinski
Kuniyuki Iwashima says: ==================== dev: Covnert dev_change_name() to per-netns RTNL. Patch 1 adds a missing netdev_rename_lock in dev_change_name() and Patch 2 removes unnecessary devnet_rename_sem there. Patch 3 replaces RTNL with rtnl_net_lock() in dev_ifsioc(), and now dev_change_name() is always called under per-netns RTNL. Given it's close to -rc8 and Patch 1 touches the trivial unlikely path, can Patch 1 go into net-next ? Otherwise I'll post Patch 2 & 3 separately in the next cycle. ==================== Link: https://patch.msgid.link/20250115095545.52709-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16dev: Hold rtnl_net_lock() for dev_ifsioc().Kuniyuki Iwashima
Basically, dev_ifsioc() operates on the passed single netns (except for netdev notifier chains with lower/upper devices for which we will need more changes). Let's hold rtnl_net_lock() for dev_ifsioc(). Now that NETDEV_CHANGENAME is always triggered under rtnl_net_lock() of the device's netns. (do_setlink() and dev_ifsioc()) Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250115095545.52709-4-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16dev: Remove devnet_rename_sem.Kuniyuki Iwashima
devnet_rename_sem is no longer used since commit 0840556e5a3a ("net: Protect dev->name by seqlock."). Also, RTNL serialises dev_change_name(). Let's remove devnet_rename_sem. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250115095545.52709-3-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16dev: Acquire netdev_rename_lock before restoring dev->name in dev_change_name().Kuniyuki Iwashima
The cited commit forgot to add netdev_rename_lock in one of the error paths in dev_change_name(). Let's hold netdev_rename_lock before restoring the old dev->name. Fixes: 0840556e5a3a ("net: Protect dev->name by seqlock.") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250115095545.52709-2-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16selftests: drv-net-hw: inject pp_alloc_fail errors in the right placeJohn Daley
The tool pp_alloc_fail.py tested error recovery by injecting errors into the function page_pool_alloc_pages(). The page pool allocation function page_pool_dev_alloc() does not end up calling page_pool_alloc_pages(). page_pool_alloc_netmems() seems to be the function that is called by all of the page pool alloc functions in the API, so move error injection to that function instead. Signed-off-by: John Daley <johndale@cisco.com> Link: https://patch.msgid.link/20250115181312.3544-2-johndale@cisco.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16ipv4: Prepare inet_rtm_getroute() to .flowi4_tos conversion.Guillaume Nault
Store rtm->rtm_tos in a dscp_t variable, which can then be used for setting fl4.flowi4_tos and also be passed as parameter of ip_route_input_rcu(). The .flowi4_tos field is going to be converted to dscp_t to ensure ECN bits aren't erroneously taken into account during route lookups. Having a dscp_t variable available will simplify that conversion, as we'll just have to drop the inet_dscp_to_dsfield() call. Note that we can't just convert rtm->rtm_tos to dscp_t because this structure is exported to user space. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/7bc1c7dc47ad1393569095d334521fae59af5bc7.1736944951.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16gre: Prepare ipgre_open() to .flowi4_tos conversion.Guillaume Nault
Use ip4h_dscp() to get the tunnel DSCP option as dscp_t, instead of manually masking the raw tos field with INET_DSCP_MASK. This will ease the conversion of fl4->flowi4_tos to dscp_t, which just becomes a matter of dropping the inet_dscp_to_dsfield() call. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/6c05a11afdc61530f1a4505147e0909ad51feb15.1736941806.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16ice: support FW Recovery ModeKonrad Knitter
Recovery Mode is intended to recover from a fatal failure scenario in which the device is not accessible to the host, meaning the firmware is non-responsive. The purpose of the Firmware Recovery Mode is to enable software tools to update firmware and/or device configuration so the fatal error can be resolved. Recovery Mode Firmware supports a limited set of admin commands required for NVM update. Recovery Firmware does not support hardware interrupts so a polling mode is used. The driver will expose only the minimum set of devlink commands required for the recovery of the adapter. Using an appropriate NVM image, the user can recover the adapter using the devlink flash API. Prior to 4.20 E810 Adapter Recovery Firmware supports only the update and erase of the "fw.mgmt" component. E810 Adapter Recovery Firmware doesn't support selected preservation of cards settings or identifiers. The following command can be used to recover the adapter: $ devlink dev flash <pci-address> <update-image.bin> component fw.mgmt overwrite settings overwrite identifier Newer FW versions (4.20 or newer) supports update of "fw.undi" and "fw.netlist" components. $ devlink dev flash <pci-address> <update-image.bin> Tested on Intel Corporation Ethernet Controller E810-C for SFP FW revision 3.20 and 4.30. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Konrad Knitter <konrad.knitter@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-16devlink: add devl guardKonrad Knitter
Add devl guard for scoped_guard(). Example usage: scoped_guard(devl, priv_to_devlink(pf)) { err = init_devlink(pf); if (err) return err; } Co-developed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Konrad Knitter <konrad.knitter@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-16pldmfw: enable selected component updateKonrad Knitter
This patch enables to update a selected component from PLDM image containing multiple components. Example usage: struct pldmfw; data.mode = PLDMFW_UPDATE_MODE_SINGLE_COMPONENT; data.compontent_identifier = DRIVER_FW_MGMT_COMPONENT_ID; Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Konrad Knitter <konrad.knitter@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.13-rc8). Conflicts: drivers/net/ethernet/realtek/r8169_main.c 1f691a1fc4be ("r8169: remove redundant hwmon support") 152d00a91396 ("r8169: simplify setting hwmon attribute visibility") https://lore.kernel.org/20250115122152.760b4e8d@canb.auug.org.au Adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt.c 152f4da05aee ("bnxt_en: add support for rx-copybreak ethtool command") f0aa6a37a3db ("eth: bnxt: always recalculate features after XDP clearing, fix null-deref") drivers/net/ethernet/intel/ice/ice_type.h 50327223a8bb ("ice: add lock to protect low latency interface") dc26548d729e ("ice: Fix quad registers read on E825") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16Merge tag 'net-6.13-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Notably this includes fixes for a few regressions spotted very recently. No known outstanding ones. Current release - regressions: - core: avoid CFI problems with sock priv helpers - xsk: bring back busy polling support - netpoll: ensure skb_pool list is always initialized Current release - new code bugs: - core: make page_pool_ref_netmem work with net iovs - ipv4: route: fix drop reason being overridden in ip_route_input_slow - udp: make rehash4 independent in udp_lib_rehash() Previous releases - regressions: - bpf: fix bpf_sk_select_reuseport() memory leak - openvswitch: fix lockup on tx to unregistering netdev with carrier - mptcp: be sure to send ack when mptcp-level window re-opens - eth: - bnxt: always recalculate features after XDP clearing, fix null-deref - mlx5: fix sub-function add port error handling - fec: handle page_pool_dev_alloc_pages error Previous releases - always broken: - vsock: some fixes due to transport de-assignment - eth: - ice: fix E825 initialization - mlx5e: fix inversion dependency warning while enabling IPsec tunnel - gtp: destroy device along with udp socket's netns dismantle. - xilinx: axienet: Fix IRQ coalescing packet count overflow" * tag 'net-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits) netdev: avoid CFI problems with sock priv helpers net/mlx5e: Always start IPsec sequence number from 1 net/mlx5e: Rely on reqid in IPsec tunnel mode net/mlx5e: Fix inversion dependency warning while enabling IPsec tunnel net/mlx5: Clear port select structure when fail to create net/mlx5: SF, Fix add port error handling net/mlx5: Fix a lockdep warning as part of the write combining test net/mlx5: Fix RDMA TX steering prio net: make page_pool_ref_netmem work with net iovs net: ethernet: xgbe: re-add aneg to supported features in PHY quirks net: pcs: xpcs: actively unset DW_VR_MII_DIG_CTRL1_2G5_EN for 1G SGMII net: pcs: xpcs: fix DW_VR_MII_DIG_CTRL1_2G5_EN bit being set for 1G SGMII w/o inband selftests: net: Adapt ethtool mq tests to fix in qdisc graft net: fec: handle page_pool_dev_alloc_pages error net: netpoll: ensure skb_pool list is always initialized net: xilinx: axienet: Fix IRQ coalescing packet count overflow nfp: bpf: prevent integer overflow in nfp_bpf_event_output() selftests: mptcp: avoid spurious errors on disconnect mptcp: fix spurious wake-up on under memory pressure mptcp: be sure to send ack when mptcp-level window re-opens ...
2025-01-16Merge tag 'pm-6.13-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Update the documentation of cpuidle governors that does not match the code any more after previous functional changes (Rafael Wysocki) and fix up the cpufreq Kconfig file broken inadvertently by a previous update (Viresh Kumar)" * tag 'pm-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: Move endif to the end of Kconfig file cpuidle: teo: Update documentation after previous changes cpuidle: menu: Update documentation after previous changes
2025-01-16Merge tag 'acpi-6.13-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Prevent acpi_video_device_EDID() from returning a pointer to a memory region that should not be passed to kfree() which causes one of its users to crash randomly on attempts to free it (Chris Bainbridge)" * tag 'acpi-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: video: Fix random crashes due to bad kfree()
2025-01-16Merge tag 'for-6.13-rc7-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fix from David Sterba: - handle d_path() errors when canonicalizing device mapper paths during device scan * tag 'for-6.13-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: add the missing error handling inside get_canonical_dev_path
2025-01-16Merge branch 'pm-cpufreq'Rafael J. Wysocki
Merge a cpufreq fix for 6.13: - Fix cpufreq Kconfig breakage after previous changes (Viresh Kumar). * pm-cpufreq: cpufreq: Move endif to the end of Kconfig file
2025-01-16netdev: avoid CFI problems with sock priv helpersJakub Kicinski
Li Li reports that casting away callback type may cause issues for CFI. Let's generate a small wrapper for each callback, to make sure compiler sees the anticipated types. Reported-by: Li Li <dualli@chromium.org> Link: https://lore.kernel.org/CANBPYPjQVqmzZ4J=rVQX87a9iuwmaetULwbK_5_3YWk2eGzkaA@mail.gmail.com Fixes: 170aafe35cb9 ("netdev: support binding dma-buf to netdevice") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Link: https://patch.msgid.link/20250115161436.648646-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16Merge branch 'mlx5-misc-fixes-2025-01-15'Paolo Abeni
Tariq Toukan says: ==================== mlx5 misc fixes 2025-01-15 This patchset provides misc bug fixes from the team to the mlx5 core and Eth drivers. ==================== Link: https://patch.msgid.link/20250115113910.1990174-1-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5e: Always start IPsec sequence number from 1Leon Romanovsky
According to RFC4303, section "3.3.3. Sequence Number Generation", the first packet sent using a given SA will contain a sequence number of 1. This is applicable to both ESN and non-ESN mode, which was not covered in commit mentioned in Fixes line. Fixes: 3d42c8cc67a8 ("net/mlx5e: Ensure that IPsec sequence packet number starts from 1") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5e: Rely on reqid in IPsec tunnel modeLeon Romanovsky
All packet offloads SAs have reqid in it to make sure they have corresponding policy. While it is not strictly needed for transparent mode, it is extremely important in tunnel mode. In that mode, policy and SAs have different match criteria. Policy catches the whole subnet addresses, and SA catches the tunnel gateways addresses. The source address of such tunnel is not known during egress packet traversal in flow steering as it is added only after successful encryption. As reqid is required for packet offload and it is unique for every SA, we can safely rely on it only. The output below shows the configured egress policy and SA by strongswan: [leonro@vm ~]$ sudo ip x s src 192.169.101.2 dst 192.169.101.1 proto esp spi 0xc88b7652 reqid 1 mode tunnel replay-window 0 flag af-unspec esn aead rfc4106(gcm(aes)) 0xe406a01083986e14d116488549094710e9c57bc6 128 anti-replay esn context: seq-hi 0x0, seq 0x0, oseq-hi 0x0, oseq 0x0 replay_window 1, bitmap-length 1 00000000 crypto offload parameters: dev eth2 dir out mode packet [leonro@064 ~]$ sudo ip x p src 192.170.0.0/16 dst 192.170.0.0/16 dir out priority 383615 ptype main tmpl src 192.169.101.2 dst 192.169.101.1 proto esp spi 0xc88b7652 reqid 1 mode tunnel crypto offload parameters: dev eth2 mode packet Fixes: b3beba1fb404 ("net/mlx5e: Allow policies with reqid 0, to support IKE policy holes") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5e: Fix inversion dependency warning while enabling IPsec tunnelLeon Romanovsky
Attempt to enable IPsec packet offload in tunnel mode in debug kernel generates the following kernel panic, which is happening due to two issues: 1. In SA add section, the should be _bh() variant when marking SA mode. 2. There is not needed flush_workqueue in SA delete routine. It is not needed as at this stage as it is removed from SADB and the running work will be canceled later in SA free. ===================================================== WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected 6.12.0+ #4 Not tainted ----------------------------------------------------- charon/1337 [HC0[0]:SC0[4]:HE1:SE0] is trying to acquire: ffff88810f365020 (&xa->xa_lock#24){+.+.}-{3:3}, at: mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] and this task is already holding: ffff88813e0f0d48 (&x->lock){+.-.}-{3:3}, at: xfrm_state_delete+0x16/0x30 which would create a new lock dependency: (&x->lock){+.-.}-{3:3} -> (&xa->xa_lock#24){+.+.}-{3:3} but this new dependency connects a SOFTIRQ-irq-safe lock: (&x->lock){+.-.}-{3:3} ... which became SOFTIRQ-irq-safe at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 xfrm_timer_handler+0x91/0xd70 __hrtimer_run_queues+0x1dd/0xa60 hrtimer_run_softirq+0x146/0x2e0 handle_softirqs+0x266/0x860 irq_exit_rcu+0x115/0x1a0 sysvec_apic_timer_interrupt+0x6e/0x90 asm_sysvec_apic_timer_interrupt+0x16/0x20 default_idle+0x13/0x20 default_idle_call+0x67/0xa0 do_idle+0x2da/0x320 cpu_startup_entry+0x50/0x60 start_secondary+0x213/0x2a0 common_startup_64+0x129/0x138 to a SOFTIRQ-irq-unsafe lock: (&xa->xa_lock#24){+.+.}-{3:3} ... which became SOFTIRQ-irq-unsafe at: ... lock_acquire+0x1be/0x520 _raw_spin_lock+0x2c/0x40 xa_set_mark+0x70/0x110 mlx5e_xfrm_add_state+0xe48/0x2290 [mlx5_core] xfrm_dev_state_add+0x3bb/0xd70 xfrm_add_sa+0x2451/0x4a90 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&xa->xa_lock#24); local_irq_disable(); lock(&x->lock); lock(&xa->xa_lock#24); <Interrupt> lock(&x->lock); *** DEADLOCK *** 2 locks held by charon/1337: #0: ffffffff87f8f858 (&net->xfrm.xfrm_cfg_mutex){+.+.}-{4:4}, at: xfrm_netlink_rcv+0x5e/0x90 #1: ffff88813e0f0d48 (&x->lock){+.-.}-{3:3}, at: xfrm_state_delete+0x16/0x30 the dependencies between SOFTIRQ-irq-safe lock and the holding lock: -> (&x->lock){+.-.}-{3:3} ops: 29 { HARDIRQ-ON-W at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 xfrm_alloc_spi+0xc0/0xe60 xfrm_alloc_userspi+0x5f6/0xbc0 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 IN-SOFTIRQ-W at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 xfrm_timer_handler+0x91/0xd70 __hrtimer_run_queues+0x1dd/0xa60 hrtimer_run_softirq+0x146/0x2e0 handle_softirqs+0x266/0x860 irq_exit_rcu+0x115/0x1a0 sysvec_apic_timer_interrupt+0x6e/0x90 asm_sysvec_apic_timer_interrupt+0x16/0x20 default_idle+0x13/0x20 default_idle_call+0x67/0xa0 do_idle+0x2da/0x320 cpu_startup_entry+0x50/0x60 start_secondary+0x213/0x2a0 common_startup_64+0x129/0x138 INITIAL USE at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 xfrm_alloc_spi+0xc0/0xe60 xfrm_alloc_userspi+0x5f6/0xbc0 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 } ... key at: [<ffffffff87f9cd20>] __key.18+0x0/0x40 the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock: -> (&xa->xa_lock#24){+.+.}-{3:3} ops: 9 { HARDIRQ-ON-W at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 mlx5e_xfrm_add_state+0xc5b/0x2290 [mlx5_core] xfrm_dev_state_add+0x3bb/0xd70 xfrm_add_sa+0x2451/0x4a90 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 SOFTIRQ-ON-W at: lock_acquire+0x1be/0x520 _raw_spin_lock+0x2c/0x40 xa_set_mark+0x70/0x110 mlx5e_xfrm_add_state+0xe48/0x2290 [mlx5_core] xfrm_dev_state_add+0x3bb/0xd70 xfrm_add_sa+0x2451/0x4a90 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 INITIAL USE at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 mlx5e_xfrm_add_state+0xc5b/0x2290 [mlx5_core] xfrm_dev_state_add+0x3bb/0xd70 xfrm_add_sa+0x2451/0x4a90 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 } ... key at: [<ffffffffa078ff60>] __key.48+0x0/0xfffffffffff210a0 [mlx5_core] ... acquired at: __lock_acquire+0x30a0/0x5040 lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] xfrm_dev_state_delete+0x90/0x160 __xfrm_state_delete+0x662/0xae0 xfrm_state_delete+0x1e/0x30 xfrm_del_sa+0x1c2/0x340 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 stack backtrace: CPU: 7 UID: 0 PID: 1337 Comm: charon Not tainted 6.12.0+ #4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x74/0xd0 check_irq_usage+0x12e8/0x1d90 ? print_shortest_lock_dependencies_backwards+0x1b0/0x1b0 ? check_chain_key+0x1bb/0x4c0 ? __lockdep_reset_lock+0x180/0x180 ? check_path.constprop.0+0x24/0x50 ? mark_lock+0x108/0x2fb0 ? print_circular_bug+0x9b0/0x9b0 ? mark_lock+0x108/0x2fb0 ? print_usage_bug.part.0+0x670/0x670 ? check_prev_add+0x1c4/0x2310 check_prev_add+0x1c4/0x2310 __lock_acquire+0x30a0/0x5040 ? lockdep_set_lock_cmp_fn+0x190/0x190 ? lockdep_set_lock_cmp_fn+0x190/0x190 lock_acquire+0x1be/0x520 ? mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] ? lockdep_hardirqs_on_prepare+0x400/0x400 ? __xfrm_state_delete+0x5f0/0xae0 ? lock_downgrade+0x6b0/0x6b0 _raw_spin_lock_bh+0x34/0x40 ? mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] xfrm_dev_state_delete+0x90/0x160 __xfrm_state_delete+0x662/0xae0 xfrm_state_delete+0x1e/0x30 xfrm_del_sa+0x1c2/0x340 ? xfrm_get_sa+0x250/0x250 ? check_chain_key+0x1bb/0x4c0 xfrm_user_rcv_msg+0x493/0x880 ? copy_sec_ctx+0x270/0x270 ? check_chain_key+0x1bb/0x4c0 ? lockdep_set_lock_cmp_fn+0x190/0x190 ? lockdep_set_lock_cmp_fn+0x190/0x190 netlink_rcv_skb+0x12e/0x380 ? copy_sec_ctx+0x270/0x270 ? netlink_ack+0xd90/0xd90 ? netlink_deliver_tap+0xcd/0xb60 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 ? netlink_attachskb+0x730/0x730 ? lock_acquire+0x1be/0x520 netlink_sendmsg+0x745/0xbe0 ? netlink_unicast+0x740/0x740 ? __might_fault+0xbb/0x170 ? netlink_unicast+0x740/0x740 __sock_sendmsg+0xc5/0x190 ? fdget+0x163/0x1d0 __sys_sendto+0x1fe/0x2c0 ? __x64_sys_getpeername+0xb0/0xb0 ? do_user_addr_fault+0x856/0xe30 ? lock_acquire+0x1be/0x520 ? __task_pid_nr_ns+0x117/0x410 ? lock_downgrade+0x6b0/0x6b0 __x64_sys_sendto+0xdc/0x1b0 ? lockdep_hardirqs_on_prepare+0x284/0x400 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f7d31291ba4 Code: 7d e8 89 4d d4 e8 4c 42 f7 ff 44 8b 4d d0 4c 8b 45 c8 89 c3 44 8b 55 d4 8b 7d e8 b8 2c 00 00 00 48 8b 55 d8 48 8b 75 e0 0f 05 <48> 3d 00 f0 ff ff 77 34 89 df 48 89 45 e8 e8 99 42 f7 ff 48 8b 45 RSP: 002b:00007f7d2ccd94f0 EFLAGS: 00000297 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f7d31291ba4 RDX: 0000000000000028 RSI: 00007f7d2ccd96a0 RDI: 000000000000000a RBP: 00007f7d2ccd9530 R08: 00007f7d2ccd9598 R09: 000000000000000c R10: 0000000000000000 R11: 0000000000000297 R12: 0000000000000028 R13: 00007f7d2ccd9598 R14: 00007f7d2ccd96a0 R15: 00000000000000e1 </TASK> Fixes: 4c24272b4e2b ("net/mlx5e: Listen to ARP events to update IPsec L2 headers in tunnel mode") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5: Clear port select structure when fail to createMark Zhang
Clear the port select structure on error so no stale values left after definers are destroyed. That's because the mlx5_lag_destroy_definers() always try to destroy all lag definers in the tt_map, so in the flow below lag definers get double-destroyed and cause kernel crash: mlx5_lag_port_sel_create() mlx5_lag_create_definers() mlx5_lag_create_definer() <- Failed on tt 1 mlx5_lag_destroy_definers() <- definers[tt=0] gets destroyed mlx5_lag_port_sel_create() mlx5_lag_create_definers() mlx5_lag_create_definer() <- Failed on tt 0 mlx5_lag_destroy_definers() <- definers[tt=0] gets double-destroyed Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 64k pages, 48-bit VAs, pgdp=0000000112ce2e00 [0000000000000008] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Modules linked in: iptable_raw bonding ip_gre ip6_gre gre ip6_tunnel tunnel6 geneve ip6_udp_tunnel udp_tunnel ipip tunnel4 ip_tunnel rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) mlx5_fwctl(OE) fwctl(OE) mlx5_core(OE) mlxdevm(OE) ib_core(OE) mlxfw(OE) memtrack(OE) mlx_compat(OE) openvswitch nsh nf_conncount psample xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo xt_addrtype iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc netconsole overlay efi_pstore sch_fq_codel zram ip_tables crct10dif_ce qemu_fw_cfg fuse ipv6 crc_ccitt [last unloaded: mlx_compat(OE)] CPU: 3 UID: 0 PID: 217 Comm: kworker/u53:2 Tainted: G OE 6.11.0+ #2 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core] lr : mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core] sp : ffff800085fafb00 x29: ffff800085fafb00 x28: ffff0000da0c8000 x27: 0000000000000000 x26: ffff0000da0c8000 x25: ffff0000da0c8000 x24: ffff0000da0c8000 x23: ffff0000c31f81a0 x22: 0400000000000000 x21: ffff0000da0c8000 x20: 0000000000000000 x19: 0000000000000001 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff8b0c9350 x14: 0000000000000000 x13: ffff800081390d18 x12: ffff800081dc3cc0 x11: 0000000000000001 x10: 0000000000000b10 x9 : ffff80007ab7304c x8 : ffff0000d00711f0 x7 : 0000000000000004 x6 : 0000000000000190 x5 : ffff00027edb3010 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff0000d39b8000 x1 : ffff0000d39b8000 x0 : 0400000000000000 Call trace: mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core] mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core] mlx5_lag_destroy_definers+0xa0/0x108 [mlx5_core] mlx5_lag_port_sel_create+0x2d4/0x6f8 [mlx5_core] mlx5_activate_lag+0x60c/0x6f8 [mlx5_core] mlx5_do_bond_work+0x284/0x5c8 [mlx5_core] process_one_work+0x170/0x3e0 worker_thread+0x2d8/0x3e0 kthread+0x11c/0x128 ret_from_fork+0x10/0x20 Code: a9025bf5 aa0003f6 a90363f7 f90023f9 (f9400400) ---[ end trace 0000000000000000 ]--- Fixes: dc48516ec7d3 ("net/mlx5: Lag, add support to create definers for LAG") Signed-off-by: Mark Zhang <markzhang@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5: SF, Fix add port error handlingChris Mi
If failed to add SF, error handling doesn't delete the SF from the SF table. But the hw resources are deleted. So when unload driver, hw resources will be deleted again. Firmware will report syndrome 0x68def3 which means "SF is not allocated can not deallocate". Fix it by delete SF from SF table if failed to add SF. Fixes: 2597ee190b4e ("net/mlx5: Call mlx5_sf_id_erase() once in mlx5_sf_dealloc()") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Shay Drori <shayd@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5: Fix a lockdep warning as part of the write combining testYishai Hadas
Fix a lockdep warning [1] observed during the write combining test. The warning indicates a potential nested lock scenario that could lead to a deadlock. However, this is a false positive alarm because the SF lock and its parent lock are distinct ones. The lockdep confusion arises because the locks belong to the same object class (i.e., struct mlx5_core_dev). To resolve this, the code has been refactored to avoid taking both locks. Instead, only the parent lock is acquired. [1] raw_ethernet_bw/2118 is trying to acquire lock: [ 213.619032] ffff88811dd75e08 (&dev->wc_state_lock){+.+.}-{3:3}, at: mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.620270] [ 213.620270] but task is already holding lock: [ 213.620943] ffff88810b585e08 (&dev->wc_state_lock){+.+.}-{3:3}, at: mlx5_wc_support_get+0x10c/0x210 [mlx5_core] [ 213.622045] [ 213.622045] other info that might help us debug this: [ 213.622778] Possible unsafe locking scenario: [ 213.622778] [ 213.623465] CPU0 [ 213.623815] ---- [ 213.624148] lock(&dev->wc_state_lock); [ 213.624615] lock(&dev->wc_state_lock); [ 213.625071] [ 213.625071] *** DEADLOCK *** [ 213.625071] [ 213.625805] May be due to missing lock nesting notation [ 213.625805] [ 213.626522] 4 locks held by raw_ethernet_bw/2118: [ 213.627019] #0: ffff88813f80d578 (&uverbs_dev->disassociate_srcu){.+.+}-{0:0}, at: ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs] [ 213.628088] #1: ffff88810fb23930 (&file->hw_destroy_rwsem){.+.+}-{3:3}, at: ib_init_ucontext+0x2d/0xf0 [ib_uverbs] [ 213.629094] #2: ffff88810fb23878 (&file->ucontext_lock){+.+.}-{3:3}, at: ib_init_ucontext+0x49/0xf0 [ib_uverbs] [ 213.630106] #3: ffff88810b585e08 (&dev->wc_state_lock){+.+.}-{3:3}, at: mlx5_wc_support_get+0x10c/0x210 [mlx5_core] [ 213.631185] [ 213.631185] stack backtrace: [ 213.631718] CPU: 1 UID: 0 PID: 2118 Comm: raw_ethernet_bw Not tainted 6.12.0-rc7_internal_net_next_mlx5_89a0ad0 #1 [ 213.632722] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 213.633785] Call Trace: [ 213.634099] [ 213.634393] dump_stack_lvl+0x7e/0xc0 [ 213.634806] print_deadlock_bug+0x278/0x3c0 [ 213.635265] __lock_acquire+0x15f4/0x2c40 [ 213.635712] lock_acquire+0xcd/0x2d0 [ 213.636120] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.636722] ? mlx5_ib_enable_lb+0x24/0xa0 [mlx5_ib] [ 213.637277] __mutex_lock+0x81/0xda0 [ 213.637697] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.638305] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.638902] ? rcu_read_lock_sched_held+0x3f/0x70 [ 213.639400] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.640016] mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.640615] set_ucontext_resp+0x68/0x2b0 [mlx5_ib] [ 213.641144] ? debug_mutex_init+0x33/0x40 [ 213.641586] mlx5_ib_alloc_ucontext+0x18e/0x7b0 [mlx5_ib] [ 213.642145] ib_init_ucontext+0xa0/0xf0 [ib_uverbs] [ 213.642679] ib_uverbs_handler_UVERBS_METHOD_GET_CONTEXT+0x95/0xc0 [ib_uverbs] [ 213.643426] ? _copy_from_user+0x46/0x80 [ 213.643878] ib_uverbs_cmd_verbs+0xa6b/0xc80 [ib_uverbs] [ 213.644426] ? ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x130/0x130 [ib_uverbs] [ 213.645213] ? __lock_acquire+0xa99/0x2c40 [ 213.645675] ? lock_acquire+0xcd/0x2d0 [ 213.646101] ? ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs] [ 213.646625] ? reacquire_held_locks+0xcf/0x1f0 [ 213.647102] ? do_user_addr_fault+0x45d/0x770 [ 213.647586] ib_uverbs_ioctl+0xe0/0x170 [ib_uverbs] [ 213.648102] ? ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs] [ 213.648632] __x64_sys_ioctl+0x4d3/0xaa0 [ 213.649060] ? do_user_addr_fault+0x4a8/0x770 [ 213.649528] do_syscall_64+0x6d/0x140 [ 213.649947] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 213.650478] RIP: 0033:0x7fa179b0737b [ 213.650893] Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 7d 2a 0f 00 f7 d8 64 89 01 48 [ 213.652619] RSP: 002b:00007ffd2e6d46e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 213.653390] RAX: ffffffffffffffda RBX: 00007ffd2e6d47f8 RCX: 00007fa179b0737b [ 213.654084] RDX: 00007ffd2e6d47e0 RSI: 00000000c0181b01 RDI: 0000000000000003 [ 213.654767] RBP: 00007ffd2e6d47c0 R08: 00007fa1799be010 R09: 0000000000000002 [ 213.655453] R10: 00007ffd2e6d4960 R11: 0000000000000246 R12: 00007ffd2e6d487c [ 213.656170] R13: 0000000000000027 R14: 0000000000000001 R15: 00007ffd2e6d4f70 Fixes: d98995b4bf98 ("net/mlx5: Reimplement write combining test") Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5: Fix RDMA TX steering prioPatrisious Haddad
User added steering rules at RDMA_TX were being added to the first prio, which is the counters prio. Fix that so that they are correctly added to the BYPASS_PRIO instead. Fixes: 24670b1a3166 ("net/mlx5: Add support for RDMA TX steering") Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16Merge branch 'net-stmmac-rx-performance-improvement'Paolo Abeni
Furong Xu says: ==================== net: stmmac: RX performance improvement This series improves RX performance a lot, ~40% TCP RX throughput boost has been observed with DWXGMAC CORE 3.20a running on Cortex-A65 CPUs: from 2.18 Gbits/sec increased to 3.06 Gbits/sec. ==================== Link: https://patch.msgid.link/cover.1736910454.git.0x1207@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net: stmmac: Convert prefetch() to net_prefetch() for received framesFurong Xu
The size of DMA descriptors is 32 bytes at most. net_prefetch() for received frames, and keep prefetch() for descriptors. This patch brings ~4.8% driver performance improvement in a TCP RX throughput test with iPerf tool on a single isolated Cortex-A65 CPU core, 2.92 Gbits/sec increased to 3.06 Gbits/sec. Suggested-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Yanteng Si <si.yanteng@linux.dev> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net: stmmac: Optimize cache prefetch in RX pathFurong Xu
Current code prefetches cache lines for the received frame first, and then dma_sync_single_for_cpu() against this frame, this is wrong. Cache prefetch should be triggered after dma_sync_single_for_cpu(). This patch brings ~2.8% driver performance improvement in a TCP RX throughput test with iPerf tool on a single isolated Cortex-A65 CPU core, 2.84 Gbits/sec increased to 2.92 Gbits/sec. Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Yanteng Si <si.yanteng@linux.dev> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit (git 2.34.1) at 2025-07-16 01:29:39 +0000