| Age | Commit message (Collapse) | Author |
|---|
|
It is possible trigger below warning message from mass storage function,
WARNING: CPU: 6 PID: 3839 at drivers/usb/gadget/udc/core.c:294 usb_ep_queue+0x7c/0x104
pc : usb_ep_queue+0x7c/0x104
lr : fsg_main_thread+0x494/0x1b3c
Root cause is mass storage function try to queue request from main thread,
but other thread may already disable ep when function disable.
As there is no function failure in the driver, in order to avoid effort
to fix warning, change WARN_ON_ONCE() in usb_ep_queue() to pr_debug().
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable@vger.kernel.org
Signed-off-by: yuan linyu <yuanlinyu@hihonor.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20240315020144.2715575-1-yuanlinyu@hihonor.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Intel Arrow Lake CPU uses the Meteor Lake ID with this
controller (the controller that's part of the Intel Arrow
Lake chipset (PCH) does still have unique PCI ID).
Fixes: de4b5b28c87c ("usb: dwc3: pci: add support for the Intel Arrow Lake-H")
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240312115008.1748637-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the device is configured for system wakeup, then make sure that the
xHCI driver knows about it and make sure to permit wakeup only at the
appropriate time.
For host mode, if the controller goes through the dwc3 code path, then a
child xHCI platform device is created. Make sure the platform device
also inherits the wakeup setting for xHCI to enable remote wakeup.
For device mode, make sure to disable system wakeup if no gadget driver
is bound. We may experience unwanted system wakeup due to the wakeup
signal from the controller PMU detecting connection/disconnection when
in low power (D3). E.g. In the case of Steam Deck, the PCI PME prevents
the system staying in suspend.
Cc: stable@vger.kernel.org
Reported-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Closes: https://lore.kernel.org/linux-usb/70a7692d-647c-9be7-00a6-06fc60f77294@igalia.com/T/#mf00d6669c2eff7b308d1162acd1d66c09f0853c7
Fixes: d07e8819a03d ("usb: dwc3: add xHCI Host support")
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Tested-by: Sanath S <Sanath.S@amd.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Link: https://lore.kernel.org/r/667cfda7009b502e08462c8fb3f65841d103cc0a.1709865476.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 75fd6485cccef269ac9eb3b71cf56753341195ef.
This patch was applied twice by accident, causing probe failures.
Revert the accident.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Fixes: 75fd6485ccce ("usb: phy: generic: Get the vbus supply")
Cc: stable <stable@kernel.org>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20240314092628.1869414-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
wdm_read() cannot race with itself. However, in
service_outstanding_interrupt() it can race with the
workqueue, which can be triggered by error handling.
Hence we need to make sure that the WDM_RESPONDING
flag is not just only set but tested.
Fixes: afba937e540c9 ("USB: CDC WDM driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20240314115132.3907-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added functionality to exit from L1 state by device initiation
using remote wakeup signaling, in case when function driver queuing
request while core in L1 state.
Fixes: 273d576c4d41 ("usb: dwc2: gadget: Add functionality to exit from LPM L1 state")
Fixes: 88b02f2cb1e1 ("usb: dwc2: Add core state checking")
CC: stable@vger.kernel.org
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/b4d9de5382375dddbf7ef6049d9a82066ad87d5d.1710166393.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added exiting from the clock gating mode on USB Reset Detect interrupt
if core in the clock gating mode.
Added new condition to check core in clock gating mode or no.
Fixes: 9b4965d77e11 ("usb: dwc2: Add exit clock gating from session request interrupt")
Fixes: 5d240efddc7f ("usb: dwc2: Add exit clock gating from wakeup interrupt")
Fixes: 16c729f90bdf ("usb: dwc2: Allow exit clock gating in urb enqueue")
Fixes: 401411bbc4e6 ("usb: dwc2: Add exit clock gating before removing driver")
CC: stable@vger.kernel.org
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/cbcc2ccd37e89e339130797ed68ae4597db773ac.1708938774.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixed ISOC completion flow in DDMA mode. Added isoc
descriptor actual length value and update urb's start_frame
value.
Fixed initialization of ISOC DMA descriptors flow.
Fixes: 56f5b1cff22a ("staging: Core files for the DWC2 driver")
Fixes: 20f2eb9c4cf8 ("staging: dwc2: add microframe scheduler from downstream Pi kernel")
Fixes: c17b337c1ea4 ("usb: dwc2: host: program descriptor for next frame")
Fixes: dc4c76e7b22c ("staging: HCD descriptor DMA support for the DWC2 driver")
Fixes: 762d3a1a9cd7 ("usb: dwc2: host: process all completed urbs")
CC: stable@vger.kernel.org
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/a8b1e1711cc6cabfb45d92ede12e35445c66f06c.1708944698.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Starting from core v4.30a changed order of programming
GPWRDN_PMUACTV to 0 in case of exit from hibernation on
remote wakeup signaling from device.
Fixes: c5c403dc4336 ("usb: dwc2: Add host/device hibernation functions")
CC: stable@vger.kernel.org
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/99385ec55ce73445b6fbd0f471c9bd40eb1c9b9e.1708939799.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added to backup/restore registers HFLBADDR, HCCHARi, HCSPLTi,
HCTSIZi, HCDMAi and HCDMABi.
Fixes: 58e52ff6a6c3 ("usb: dwc2: Move register save and restore functions")
Fixes: d17ee77b3044 ("usb: dwc2: add controller hibernation support")
CC: stable@vger.kernel.org
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/c2d10ee6098b9b009a8e94191e046004747d3bdd.1708945444.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As discussed on the mailing list, add myself as mwifiex driver reviewer.
Link: https://lore.kernel.org/all/20240318112830.GA9565@francesco-nb/
Signed-off-by: Francesco Dolcini <francesco@dolcini.it>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240321163420.11158-1-francesco@dolcini.it
|
|
It has been reported the commit cf3986f8c01d3 introduced a regression
when the temperature is wavering in the hysteresis region. The
mitigation stops leading to an uncontrolled temperature increase until
reaching the critical trip point.
Here what happens:
* 'throttle' is when the current temperature is greater than the trip
point temperature
* 'target' is the mitigation level
* 'passive' is positive when there is a mitigation, zero otherwise
* these values are computed in the step_wise governor
Configuration:
trip point 1: temp=95°C, hyst=5°C (passive)
trip point 2: temp=115°C, hyst=0°C (critical)
governor: step_wise
1. The temperature crosses the way up the trip point 1 at 95°C
- trend=raising
- throttle=1, target=1
- passive=1
- set_trips: low=90°C, high=115°C
2. The temperature decreases but stays in the hysteresis region at
93°C
- trend=dropping
- throttle=0, target=0
- passive=1
Before cf3986f8c01d3
- set_trips: low=90°C, high=95°C
After cf3986f8c01d3
- set_trips: low=90°C, high=115°C
3. The temperature increases a bit but stays in the hysteresis region
at 94°C (so below the trip point 1 temp 95°C)
- trend=raising
- throttle=0, target=0
- passive=1
Before cf3986f8c01d3
- set_trips: low=90°C, high=95°C
After cf3986f8c01d3
- set_trips: low=90°C, high=115°C
4. The temperature decreases but stays in the hysteresis region at
93°C
- trend=dropping
- throttle=0, target=THERMAL_NO_TARGET
- passive=0
Before cf3986f8c01d3
- set_trips: low=90°C, high=95°C
After cf3986f8c01d3
- set_trips: low=90°C, high=115°C
At this point, the 'passive' value is zero, there is no mitigation,
the temperature is in the hysteresis region, the next trip point is
115°C. As 'passive' is zero, the timer to monitor the thermal zone is
disabled. Consequently if the temperature continues to increase, no
mitigation will happen and it will reach the 115°C trip point and
reboot.
Before the optimization, the high boundary would have been 95°C, thus
triggering the mitigation again and rearming the polling timer.
The optimization make sense but given the current implementation of
the step_wise governor collaborating via this 'passive' flag with the
core framework it can not work.
From a higher perspective it seems like there is a problem between the
governor which sets a variable to be used by the core framework. That
sounds akward and it would make much more sense if the core framework
controls the governor and not the opposite. But as the devil hides in
the details, there are some subtilities to be addressed before.
Elaborating those would be out of the scope this changelog. So let's
stay simple and revert the change first to fixup all broken mobile
platforms.
This reverts commit cf3986f8c01d3 ("thermal: core: Don't update trip
points inside the hysteresis range") and takes a conflict with commit
0c0c4740c9d26 ("0c0c4740c9d2 thermal: trip: Use for_each_trip() in
__thermal_zone_set_trips()") in drivers/thermal/thermal_trip.c into
account.
Fixes: cf3986f8c01d3 ("thermal: core: Don't update trip points inside the hysteresis range")
Reported-by: Manaf Meethalavalappu Pallikunhi <quic_manafm@quicinc.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Cc: 6.7+ <stable@vger.kernel.org> # 6.7+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
acpi_db_walk_for_fields()
ACPICA commit 9061cd9aa131205657c811a52a9f8325a040c6c9
Errors in acpi_evaluate_object() can lead to incorrect state of buffer.
This can lead to access to data in previously ACPI_FREEd buffer and
secondary ACPI_FREE to the same buffer later.
Handle errors in acpi_evaluate_object the same way it is done earlier
with acpi_ns_handle_to_pathname.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Link: https://github.com/acpica/acpica/commit/9061cd9a
Fixes: 5fd033288a86 ("ACPICA: debugger: add command to dump all fields of particular subtype")
Signed-off-by: Nikita Kiryushin <kiryushin@ancud.ru>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-03-25
The following pull-request contains BPF updates for your *net* tree.
We've added 17 non-merge commits during the last 12 day(s) which contain
a total of 19 files changed, 184 insertions(+), 61 deletions(-).
The main changes are:
1) Fix an arm64 BPF JIT bug in BPF_LDX_MEMSX implementation's offset handling
found via test_bpf module, from Puranjay Mohan.
2) Various fixups to the BPF arena code in particular in the BPF verifier and
around BPF selftests to match latest corresponding LLVM implementation,
from Puranjay Mohan and Alexei Starovoitov.
3) Fix xsk to not assume that metadata is always requested in TX completion,
from Stanislav Fomichev.
4) Fix riscv BPF JIT's kfunc parameter incompatibility between BPF and the riscv
ABI which requires sign-extension on int/uint, from Pu Lehui.
5) Fix s390x BPF JIT's bpf_plt pointer arithmetic which triggered a crash when
testing struct_ops, from Ilya Leoshkevich.
6) Fix libbpf's arena mmap handling which had incorrect u64-to-pointer cast on
32-bit architectures, from Andrii Nakryiko.
7) Fix libbpf to define MFD_CLOEXEC when not available, from Arnaldo Carvalho de Melo.
8) Fix arm64 BPF JIT implementation for 32bit unconditional bswap which
resulted in an incorrect swap as indicated by test_bpf, from Artem Savkov.
9) Fix BPF man page build script to use silent mode, from Hangbin Liu.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
riscv, bpf: Fix kfunc parameters incompatibility between bpf and riscv abi
bpf: verifier: reject addr_space_cast insn without arena
selftests/bpf: verifier_arena: fix mmap address for arm64
bpf: verifier: fix addr_space_cast from as(1) to as(0)
libbpf: Define MFD_CLOEXEC if not available
arm64: bpf: fix 32bit unconditional bswap
bpf, arm64: fix bug in BPF_LDX_MEMSX
libbpf: fix u64-to-pointer cast on 32-bit arches
s390/bpf: Fix bpf_plt pointer arithmetic
xsk: Don't assume metadata is always requested in TX completion
selftests/bpf: Add arena test case for 4Gbyte corner case
selftests/bpf: Remove hard coded PAGE_SIZE macro.
libbpf, selftests/bpf: Adjust libbpf, bpftool, selftests to match LLVM
bpf: Clarify bpf_arena comments.
MAINTAINERS: Update email address for Quentin Monnet
scripts/bpf_doc: Use silent mode when exec make cmd
bpf: Temporarily disable atomic operations in BPF arena
====================
Link: https://lore.kernel.org/r/20240325213520.26688-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When consolidating GPIO lookups in ACPI code, the debug messaging
had been reworked that the user may see
[ 13.401147] (NULL device *): using ACPI '\_SB.LEDS.led-0' for '(null)' GPIO lookup
[ 13.401378] gpio gpiochip0: Persistence not supported for GPIO 40
[ 13.401402] gpio-40 (?): no flags found for (null)
instead of
[ 14.182962] gpio gpiochip0: Persistence not supported for GPIO 40
[ 14.182994] gpio-40 (?): no flags found for gpios
The '(null)' parts are less informative and likely scare the users.
Replace them by '(default)' which can point out to the default connection
IDs, such as 'gpios'.
While at it, amend other places where con_id is used in the messages.
Reported-by: Ferry Toth <ftoth@exalondelft.nl>
Fixes: 8eb1f71e7acc ("gpiolib: consolidate GPIO lookups")
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Ferry Toth <ftoth@exalondelft.nl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The gpio_device_find_by_() functions do not have stubs which means that if
they are referenced from code with an optiona dependency on gpiolib then
the code will fail to link. Add stubs for lookups via fwnode and label. I
have not added a stub for plain gpio_device_find() since it seems harder to
see a use case for that which does not depend on gpiolib.
With the addition of the GPIO reset controller (which lacks a gpiolib
dependency) to the arm64 defconfig this is causing build breaks for arm64
virtconfig in -next:
aarch64-linux-gnu-ld: drivers/reset/core.o: in function `__reset_add_reset_gpio_lookup':
/build/stage/linux/drivers/reset/core.c:861:(.text+0xccc): undefined reference to `gpio_device_find_by_fwnode'
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
When an interrupt is requested, a procfs directory is created under
"/proc/irq/<irqnum>/<label>" where <label> is the string passed to one of
the request_irq() variants.
What follows is that the string must not contain the "/" character or
the procfs mkdir operation will fail. We don't have such constraints for
GPIO consumer labels which are used verbatim as interrupt labels for
GPIO irqs. We must therefore sanitize the consumer string before
requesting the interrupt.
Let's replace all "/" with ":".
Cc: stable@vger.kernel.org
Reported-by: Stefan Wahren <wahrenst@gmx.net>
Closes: https://lore.kernel.org/linux-gpio/39fe95cb-aa83-4b8b-8cab-63947a726754@gmx.net/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
|
|
Locally generated IP multicast packets (such as the ones used in the
test) do not perform routing and simply egress the bound device.
However, as explained in commit 8bcfb4ae4d97 ("selftests: forwarding:
Fix failing tests with old libnet"), old versions of libnet (used by
mausezahn) do not use the "SO_BINDTODEVICE" socket option. Specifically,
the library started using the option for IPv6 sockets in version 1.1.6
and for IPv4 sockets in version 1.2. This explains why on Ubuntu - which
uses version 1.1.6 - the IPv4 overlay tests are failing whereas the IPv6
ones are passing.
Fix by specifying the source and destination MAC of the packets which
will cause mausezahn to use a packet socket instead of an IP socket.
Fixes: 62199e3f1658 ("selftests: net: Add VXLAN MDB test")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/5bb50349-196d-4892-8ed2-f37543aa863f@alu.unizg.hr/
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240325075030.2379513-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The dreamcastcard->timer could schedule the spu_dma_work and the
spu_dma_work could also arm the dreamcastcard->timer.
When the snd_pcm_substream is closing, the aica_channel will be
deallocated. But it could still be dereferenced in the worker
thread. The reason is that del_timer() will return directly
regardless of whether the timer handler is running or not and
the worker could be rescheduled in the timer handler. As a result,
the UAF bug will happen. The racy situation is shown below:
(Thread 1) | (Thread 2)
snd_aicapcm_pcm_close() |
... | run_spu_dma() //worker
| mod_timer()
flush_work() |
del_timer() | aica_period_elapsed() //timer
kfree(dreamcastcard->channel) | schedule_work()
| run_spu_dma() //worker
... | dreamcastcard->channel-> //USE
In order to mitigate this bug and other possible corner cases,
call mod_timer() conditionally in run_spu_dma(), then implement
PCM sync_stop op to cancel both the timer and worker. The sync_stop
op will be called from PCM core appropriately when needed.
Fixes: 198de43d758c ("[ALSA] Add ALSA support for the SEGA Dreamcast PCM device")
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Message-ID: <20240326094238.95442-1-duoming@zju.edu.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The remove callback of a device is called whenever it is unbound,
which may happen during runtime e.g. through sysfs, so this is not
allowed to be dropped from the binary:
WARNING: modpost: vmlinux: section mismatch in reference: einj_driver+0x8 (section: .data) -> einj_remove (section: .exit.text)
ERROR: modpost: Section mismatches detected.
Remove that annotation.
Fixes: 12fb28ea6b1c ("EINJ: Add CXL error type support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
STE attributes(NSCFG, PRIVCFG, INSTCFG) use value 0 for "Use Icomming",
for some reason SHCFG doesn't follow that, and it is defined as "0b01".
Currently the driver sets SHCFG to Use Incoming for stage-2 and bypass
domains.
However according to the User Manual (ARM IHI 0070 F.b):
When SMMU_IDR1.ATTR_TYPES_OVR == 0, this field is RES0 and the
incoming Shareability attribute is used.
This patch adds a condition for writing SHCFG to Use incoming to be
compliant with the architecture, and defines ATTR_TYPE_OVR as a new
feature discovered from IDR1.
This also required to propagate the SMMU through some functions args.
There is no need to add similar condition for the newly introduced function
arm_smmu_get_ste_used() as the values of the STE are the same before and
after any transition, so this will not trigger any change. (we already
do the same for the VMID).
Although this is a misconfiguration from the driver, this has been there
for a long time, so probably no HW running Linux is affected by it.
Reported-by: Will Deacon <will@kernel.org>
Closes: https://lore.kernel.org/all/20240215134952.GA690@willie-the-truck/
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240323134658.464743-1-smostafa@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Since the Renesas Ethernet Switch driver was added by Yoshihiro Shimoda,
I started receiving the patches to review for it -- which I was unable to
do, as I don't know this hardware and don't even have the manuals for it.
Fortunately, Shimoda-san has volunteered to be a reviewer for this new
driver, thus let's now split the single entry into 3 per-driver entries,
each with its own reviewer...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/de0ccc1d-6fc0-583f-4f80-f70e6461d62d@omp.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
STRTAB_STE_0_V is a CPU value, it needs conversion for sparse to be clean.
The missing annotation was a mistake introduced by splitting the ops out
from the STE writer.
Fixes: 7da51af9125c ("iommu/arm-smmu-v3: Make STE programming independent of the callers")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403011441.5WqGrYjp-lkp@intel.com/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v1-98b23ebb0c84+9f-smmu_cputole_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Among the attribute file callback routines in
drivers/usb/core/sysfs.c, the interface_authorized_store() function is
the only one which acquires a device lock on an ancestor device: It
calls usb_deauthorize_interface(), which locks the interface's parent
USB device.
The will lead to deadlock if another process already owns that lock
and tries to remove the interface, whether through a configuration
change or because the device has been disconnected. As part of the
removal procedure, device_del() waits for all ongoing sysfs attribute
callbacks to complete. But usb_deauthorize_interface() can't complete
until the device lock has been released, and the lock won't be
released until the removal has finished.
The mechanism provided by sysfs to prevent this kind of deadlock is
to use the sysfs_break_active_protection() function, which tells sysfs
not to wait for the attribute callback.
Reported-and-tested by: Yue Sun <samsun1006219@gmail.com>
Reported by: xingwei lee <xrivendell7@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/linux-usb/CAEkJfYO6jRVC8Tfrd_R=cjO0hguhrV31fDPrLrNOOHocDkPoAA@mail.gmail.com/#r
Fixes: 310d2b4124c0 ("usb: interface authorization: SysFS part of USB interface authorization")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1c37eea1-9f56-4534-b9d8-b443438dc869@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The PD of Type-C port needs to be updated in pd_set. Unlink the Type-C
port device to the old PD before linking it to a new one.
Fixes: cd099cde4ed2 ("usb: typec: tcpm: Support multiple capabilities")
Cc: stable@vger.kernel.org
Signed-off-by: Kyle Tso <kyletso@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240311172306.3911309-1-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When unregister pd capabilitie in tcpm, KASAN will capture below double
-free issue. The root cause is the same capabilitiy will be kfreed twice,
the first time is kfreed by pd_capabilities_release() and the second time
is explicitly kfreed by tcpm_port_unregister_pd().
[ 3.988059] BUG: KASAN: double-free in tcpm_port_unregister_pd+0x1a4/0x3dc
[ 3.995001] Free of addr ffff0008164d3000 by task kworker/u16:0/10
[ 4.001206]
[ 4.002712] CPU: 2 PID: 10 Comm: kworker/u16:0 Not tainted 6.8.0-rc5-next-20240220-05616-g52728c567a55 #53
[ 4.012402] Hardware name: Freescale i.MX8QXP MEK (DT)
[ 4.017569] Workqueue: events_unbound deferred_probe_work_func
[ 4.023456] Call trace:
[ 4.025920] dump_backtrace+0x94/0xec
[ 4.029629] show_stack+0x18/0x24
[ 4.032974] dump_stack_lvl+0x78/0x90
[ 4.036675] print_report+0xfc/0x5c0
[ 4.040289] kasan_report_invalid_free+0xa0/0xc0
[ 4.044937] __kasan_slab_free+0x124/0x154
[ 4.049072] kfree+0xb4/0x1e8
[ 4.052069] tcpm_port_unregister_pd+0x1a4/0x3dc
[ 4.056725] tcpm_register_port+0x1dd0/0x2558
[ 4.061121] tcpci_register_port+0x420/0x71c
[ 4.065430] tcpci_probe+0x118/0x2e0
To fix the issue, this will remove kree() from tcpm_port_unregister_pd().
Fixes: cd099cde4ed2 ("usb: typec: tcpm: Support multiple capabilities")
cc: stable@vger.kernel.org
Suggested-by: Aisheng Dong <aisheng.dong@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240311065219.777037-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When auxiliary_device_add() returns error and then calls
auxiliary_device_uninit(), callback function ljca_auxdev_release
calls kfree(auxdev->dev.platform_data) to free the parameter data
of the function ljca_new_client_device. The callers of
ljca_new_client_device shouldn't call kfree() again
in the error handling path to free the platform data.
Fix this by cleaning up the redundant kfree() in all callers and
adding kfree() the passed in platform_data on errors which happen
before auxiliary_device_init() succeeds .
Fixes: acd6199f195d ("usb: Add support for Intel LJCA device")
Cc: stable <stable@kernel.org>
Signed-off-by: Yongzhi Liu <hyperlyzcs@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240311125748.28198-1-hyperlyzcs@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When orientation switch is enabled in ucsi glink, there is a xhci
probe failure seen when booting up in host mode in reverse
orientation.
During bootup the following things happen in multiple drivers:
a) DWC3 controller driver initializes the core in device mode when the
dr_mode is set to DRD. It relies on role_switch call to change role to
host.
b) QMP driver initializes the lanes to TYPEC_ORIENTATION_NORMAL as a
normal routine. It relies on the typec_switch_set call to get notified
of orientation changes.
c) UCSI core reads the UCSI_GET_CONNECTOR_STATUS via the glink and
provides initial role switch to dwc3 controller.
When booting up in host mode with orientation TYPEC_ORIENTATION_REVERSE,
then we see the following things happening in order:
a) UCSI gives initial role as host to dwc3 controller ucsi_register_port.
Upon receiving this notification, the dwc3 core needs to program GCTL from
PRTCAP_DEVICE to PRTCAP_HOST and as part of this change, it asserts GCTL
Core soft reset and waits for it to be completed before shifting it to
host. Only after the reset is done will the dwc3_host_init be invoked and
xhci is probed. DWC3 controller expects that the usb phy's are stable
during this process i.e., the phy init is already done.
b) During the 100ms wait for GCTL core soft reset, the actual notification
from PPM is received by ucsi_glink via pmic glink for changing role to
host. The pmic_glink_ucsi_notify routine first sends the orientation
change to QMP and then sends role to dwc3 via ucsi framework. This is
happening exactly at the time GCTL core soft reset is being processed.
c) When QMP driver receives typec switch to TYPEC_ORIENTATION_REVERSE, it
then re-programs the phy at the instant GCTL core soft reset has been
asserted by dwc3 controller due to which the QMP PLL lock fails in
qmp_combo_usb_power_on.
d) After the 100ms of GCTL core soft reset is completed, the dwc3 core
goes for initializing the host mode and invokes xhci probe. But at this
point the QMP is non-responsive and as a result, the xhci plat probe fails
during xhci_reset.
Fix this by passing orientation switch to available ucsi instances if
their gpio configuration is available before ucsi_register is invoked so
that by the time, the pmic_glink_ucsi_notify provides typec_switch to QMP,
the lane is already configured and the call would be a NOP thus not racing
with role switch.
Cc: stable@vger.kernel.org
Fixes: c6165ed2f425 ("usb: ucsi: glink: use the connector orientation GPIO to provide switch events")
Suggested-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240301040914.458492-1-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In tcpm_pd_set, the array of port source capabilities is port->src_pdo,
not port->snk_pdo.
Fixes: cd099cde4ed2 ("usb: typec: tcpm: Support multiple capabilities")
Cc: stable@vger.kernel.org
Signed-off-by: Kyle Tso <kyletso@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240311144500.3694849-1-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the scenario of entering hibernation with udisk in the system, if the
udisk was gone or resume fail in the thaw phase of hibernation. Its state
will be set to NOTATTACHED. At this point, usb_hub_wq was already freezed
and can't not handle disconnect event. Next, in the poweroff phase of
hibernation, SYNCHRONIZE_CACHE SCSI command will be sent to this udisk
when poweroff this scsi device, which will cause uas_submit_urbs to be
called to submit URB for sense/data/cmd pipe. However, these URBs will
submit fail as device was set to NOTATTACHED state. Then, uas_submit_urbs
will return a value SCSI_MLQUEUE_DEVICE_BUSY to the caller. That will lead
the SCSI layer go into an ugly loop and system fail to go into hibernation.
On the other hand, when we specially check for -ENODEV in function
uas_queuecommand_lck, returning DID_ERROR to SCSI layer will cause device
poweroff fail and system shutdown instead of entering hibernation.
To fix this issue, let uas_submit_urbs to return original generic error
when submitting URB failed. At the same time, we need to translate -ENODEV
to DID_NOT_CONNECT for the SCSI layer.
Suggested-by: Oliver Neukum <oneukum@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com>
Link: https://lore.kernel.org/r/20240306180814.4897-1-WeitaoWang-oc@zhaoxin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In a similar fashion to
b388e57d4628 ("x86/vdso: Fix rethunk patching for vdso-image-{32,64}.o")
annotate vdso-image-x32.o too for objtool so that it gets annotated
properly and the unused return thunk warning doesn't fire.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202403251454.23df6278-lkp@intel.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/202403251454.23df6278-lkp@intel.com
|
|
The commit to improve NMI stall debuggability:
344da544f177 ("x86/nmi: Print reasons why backtrace NMIs are ignored")
... has shown value, but widespread use has also identified a few
opportunities for improvement.
The systems have (as usual) shown far more creativity than that commit's
author, demonstrating yet again that failing CPUs can do whatever they want.
In addition, the current message format is less friendly than one might
like to those attempting to use these messages to identify failing CPUs.
Therefore, separately flag CPUs that, during the full time that the
stack-backtrace request was waiting, were always in an NMI handler,
were never in an NMI handler, or exited one NMI handler.
Also, split the message identifying the CPU and the time since that CPU's
last NMI-related activity so that a single line identifies the CPU without
any other variable information, greatly reducing the processing overhead
required to identify repeat-offender CPUs.
Co-developed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/ab4d70c8-c874-42dc-b206-643018922393@paulmck-laptop
|
|
The Alpha blending for 30 bit RGB/BGR are not
functioning properly for rk3568/rk3588, so remove
it from the format list.
Fixes: bfd8a5c228fa ("drm/rockchip: vop2: Add more supported 10bit formats")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240304100952.3592984-1-andyshrk@163.com
|
|
The MT7530 switch after reset initialises with a core clock frequency that
works with a 25MHz XTAL connected to it. For 40MHz XTAL, the core clock
frequency must be set to 500MHz.
The mt7530_pll_setup() function is responsible of setting the core clock
frequency. Currently, it runs on MT7530 with 25MHz and 40MHz XTAL. This
causes MT7530 switch with 25MHz XTAL to egress and ingress frames
improperly.
Introduce a check to run it only on MT7530 with 40MHz XTAL.
The core clock frequency is set by writing to a switch PHY's register.
Access to the PHY's register is done via the MDIO bus the switch is also
on. Therefore, it works only when the switch makes switch PHYs listen on
the MDIO bus the switch is on. This is controlled either by the state of
the ESW_P1_LED_1 pin after reset deassertion or modifying bit 5 of the
modifiable trap register.
When ESW_P1_LED_1 is pulled high, PHY indirect access is used. That means
accessing PHY registers via the PHY indirect access control register of the
switch.
When ESW_P1_LED_1 is pulled low, PHY direct access is used. That means
accessing PHY registers via the MDIO bus the switch is on.
For MT7530 switch with 40MHz XTAL on a board with ESW_P1_LED_1 pulled high,
the core clock frequency won't be set to 500MHz, causing the switch to
egress and ingress frames improperly.
Run mt7530_pll_setup() after PHY direct access is set on the modifiable
trap register.
With these two changes, all MT7530 switches with 25MHz and 40MHz, and
P1_LED_1 pulled high or low, will egress and ingress frames properly.
Link: https://github.com/BPI-SINOVOIP/BPI-R2-bsp/blob/4a5dd143f2172ec97a2872fa29c7c4cd520f45b5/linux-mt/drivers/net/ethernet/mediatek/gsw_mt7623.c#L1039
Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20240320-for-net-mt7530-fix-25mhz-xtal-with-direct-phy-access-v1-1-d92f605f1160@arinc9.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add the "ref-cycles" event for AMD processors based on Zen 4 and later
microarchitectures. The backing event is based on PMCx120 which counts
cycles not in halt state in P0 frequency (same as MPERF).
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/089155f19f7c7e65aeb1caa727a882e2ca9b8b04.1711352180.git.sandipan.das@amd.com
|
|
AMD processors based on Zen 2 and later microarchitectures do not
support PMCx087 (instruction pipe stalls) which is used as the backing
event for "stalled-cycles-frontend" and "stalled-cycles-backend".
Use PMCx0A9 (cycles where micro-op queue is empty) instead to count
frontend stalls and remove the entry for backend stalls since there
is no direct replacement.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Fixes: 3fe3331bb285 ("perf/x86/amd: Add event map for AMD Family 17h")
Link: https://lore.kernel.org/r/03d7fc8fa2a28f9be732116009025bdec1b3ec97.1711352180.git.sandipan.das@amd.com
|
|
The pure EFI stub entry point does not take a struct boot_params from
the boot loader, but creates it from scratch, and populates only the
fields that still have meaning in this context (command line, initrd
base and size, etc)
The original mixed mode implementation used the EFI handover protocol
instead, where the boot loader (i.e., GRUB) populates a boot_params
struct and passes it to a special Linux specific EFI entry point that
takes the boot_params pointer as its third argument.
When the new mixed mode implementation was introduced, using a special
32-bit PE entrypoint in the 64-bit kernel, it adopted the pure approach,
and relied on the EFI stub to create the struct boot_params. This is
preferred because it makes the bootloader side much easier to implement,
as it does not need any x86-specific knowledge on how struct boot_params
and struct setup_header are put together. This mixed mode implementation
was adopted by systemd-boot version 252 and later.
When commit
e2ab9eab324c ("x86/boot/compressed: Move 32-bit entrypoint code into .text section")
refactored this code and moved it out of head_64.S, the fact that ESI
was populated with the address of the base of the image was overlooked,
and to simplify the code flow, ESI is now zeroed and stored to memory
unconditionally in shared code, so that the NULL-ness of that variable
can still be used later to determine which mixed mode boot protocol is
in use.
With ESI pointing to the base of the image, it can serve as a struct
boot_params pointer for startup_32(), which only accesses the init_data
and kernel_alignment fields (and the scratch field as a temporary
stack). Zeroing ESI means that those accesses produce garbage now, even
though things appear to work if the first page of memory happens to be
zeroed, and the region right before LOAD_PHYSICAL_ADDR (== 16 MiB)
happens to be free.
The solution is to pass a special, temporary struct boot_params to
startup_32() via ESI, one that is sufficient for getting it to create
the page tables correctly and is discarded right after. This involves
setting a minimal alignment of 4k, only to get the statically allocated
page tables line up correctly, and setting init_size to the executable
image size (_end - startup_32). This ensures that the page tables are
covered by the static footprint of the PE image.
Given that EFI boot no longer calls the decompressor and no longer pads
the image to permit the decompressor to execute in place, the same
temporary struct boot_params should be used in the EFI handover protocol
based mixed mode implementation as well, to prevent the page tables from
being placed outside of allocated memory.
Fixes: e2ab9eab324c ("x86/boot/compressed: Move 32-bit entrypoint code into .text section")
Cc: <stable@kernel.org> # v6.1+
Closes: https://lore.kernel.org/all/20240321150510.GI8211@craftyguy.net/
Reported-by: Clayton Craft <clayton@craftyguy.net>
Tested-by: Clayton Craft <clayton@craftyguy.net>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Some of the registers are aligned on a 32bit boundary, causing
alignment faults on 64bit platforms.
Unable to handle kernel paging request at virtual address ffffffc084a1d004
Mem abort info:
ESR = 0x0000000096000061
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x21: alignment fault
Data abort info:
ISV = 0, ISS = 0x00000061, ISS2 = 0x00000000
CM = 0, WnR = 1, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000046ad6000
[ffffffc084a1d004] pgd=100000013ffff003, p4d=100000013ffff003, pud=100000013ffff003, pmd=0068000020a00711
Internal error: Oops: 0000000096000061 [#1] SMP
Modules linked in: mtk_t7xx(+) qcserial pppoe ppp_async option nft_fib_inet nf_flow_table_inet mt7921u(O) mt7921s(O) mt7921e(O) mt7921_common(O) iwlmvm(O) iwldvm(O) usb_wwan rndis_host qmi_wwan pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack mt7996e(O) mt792x_usb(O) mt792x_lib(O) mt7915e(O) mt76_usb(O) mt76_sdio(O) mt76_connac_lib(O) mt76(O) mac80211(O) iwlwifi(O) huawei_cdc_ncm cfg80211(O) cdc_ncm cdc_ether wwan usbserial usbnet slhc sfp rtc_pcf8563 nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 mt6577_auxadc mdio_i2c libcrc32c compat(O) cdc_wdm cdc_acm at24 crypto_safexcel pwm_fan i2c_gpio i2c_smbus industrialio i2c_algo_bit i2c_mux_reg i2c_mux_pca954x i2c_mux_pca9541 i2c_mux_gpio i2c_mux dummy oid_registry tun sha512_arm64 sha1_ce sha1_generic seqiv
md5 geniv des_generic libdes cbc authencesn authenc leds_gpio xhci_plat_hcd xhci_pci xhci_mtk_hcd xhci_hcd nvme nvme_core gpio_button_hotplug(O) dm_mirror dm_region_hash dm_log dm_crypt dm_mod dax usbcore usb_common ptp aquantia pps_core mii tpm encrypted_keys trusted
CPU: 3 PID: 5266 Comm: kworker/u9:1 Tainted: G O 6.6.22 #0
Hardware name: Bananapi BPI-R4 (DT)
Workqueue: md_hk_wq t7xx_fsm_uninit [mtk_t7xx]
pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : t7xx_cldma_hw_set_start_addr+0x1c/0x3c [mtk_t7xx]
lr : t7xx_cldma_start+0xac/0x13c [mtk_t7xx]
sp : ffffffc085d63d30
x29: ffffffc085d63d30 x28: 0000000000000000 x27: 0000000000000000
x26: 0000000000000000 x25: ffffff80c804f2c0 x24: ffffff80ca196c05
x23: 0000000000000000 x22: ffffff80c814b9b8 x21: ffffff80c814b128
x20: 0000000000000001 x19: ffffff80c814b080 x18: 0000000000000014
x17: 0000000055c9806b x16: 000000007c5296d0 x15: 000000000f6bca68
x14: 00000000dbdbdce4 x13: 000000001aeaf72a x12: 0000000000000001
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffffff80ca1ef6b4 x7 : ffffff80c814b818 x6 : 0000000000000018
x5 : 0000000000000870 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 000000010a947000 x1 : ffffffc084a1d004 x0 : ffffffc084a1d004
Call trace:
t7xx_cldma_hw_set_start_addr+0x1c/0x3c [mtk_t7xx]
t7xx_fsm_uninit+0x578/0x5ec [mtk_t7xx]
process_one_work+0x154/0x2a0
worker_thread+0x2ac/0x488
kthread+0xe0/0xec
ret_from_fork+0x10/0x20
Code: f9400800 91001000 8b214001 d50332bf (f9000022)
---[ end trace 0000000000000000 ]---
The inclusion of io-64-nonatomic-lo-hi.h indicates that all 64bit
accesses can be replaced by pairs of nonatomic 32bit access. Fix
alignment by forcing all accesses to be 32bit on 64bit platforms.
Link: https://forum.openwrt.org/t/fibocom-fm350-gl-support/142682/72
Fixes: 39d439047f1d ("net: wwan: t7xx: Add control DMA interface")
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Tested-by: Liviu Dudau <liviu@dudau.co.uk>
Link: https://lore.kernel.org/r/20240322144000.1683822-1-bjorn@mork.no
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We had various syzbot reports about tcp timers firing after
the corresponding netns has been dismantled.
Fortunately Josef Bacik could trigger the issue more often,
and could test a patch I wrote two years ago.
When TCP sockets are closed, we call inet_csk_clear_xmit_timers()
to 'stop' the timers.
inet_csk_clear_xmit_timers() can be called from any context,
including when socket lock is held.
This is the reason it uses sk_stop_timer(), aka del_timer().
This means that ongoing timers might finish much later.
For user sockets, this is fine because each running timer
holds a reference on the socket, and the user socket holds
a reference on the netns.
For kernel sockets, we risk that the netns is freed before
timer can complete, because kernel sockets do not hold
reference on the netns.
This patch adds inet_csk_clear_xmit_timers_sync() function
that using sk_stop_timer_sync() to make sure all timers
are terminated before the kernel socket is released.
Modules using kernel sockets close them in their netns exit()
handler.
Also add sock_not_owned_by_me() helper to get LOCKDEP
support : inet_csk_clear_xmit_timers_sync() must not be called
while socket lock is held.
It is very possible we can revert in the future commit
3a58f13a881e ("net: rds: acquire refcount on TCP sockets")
which attempted to solve the issue in rds only.
(net/smc/af_smc.c and net/mptcp/subflow.c have similar code)
We probably can remove the check_net() tests from
tcp_out_of_resources() and __tcp_close() in the future.
Reported-by: Josef Bacik <josef@toxicpanda.com>
Closes: https://lore.kernel.org/netdev/20240314210740.GA2823176@perftesting/
Fixes: 26abe14379f8 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.")
Fixes: 8a68173691f0 ("net: sk_clone_lock() should only do get_net() if the parent is not a kernel socket")
Link: https://lore.kernel.org/bpf/CANn89i+484ffqb93aQm1N-tjxxvb3WDKX0EbD7318RwRgsatjw@mail.gmail.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Josef Bacik <josef@toxicpanda.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/20240322135732.1535772-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
commit e748d0fd66ab ("net: hsr: Disable promiscuous mode in
offload mode") disables promiscuous mode of slave devices
while creating an HSR interface. But while deleting the
HSR interface, it does not take care of it. It decreases the
promiscuous mode count, which eventually enables promiscuous
mode on the slave devices when creating HSR interface again.
Fix this by not decrementing the promiscuous mode count while
deleting the HSR interface when offload is enabled.
Fixes: e748d0fd66ab ("net: hsr: Disable promiscuous mode in offload mode")
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240322100447.27615-1-r-gunasekaran@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function platform_get_resource was replaced with
devm_platform_ioremap_resource_byname and is called using 0 as name.
This eventually ends up in platform_get_resource_byname in the call
stack, where it causes a null pointer in strcmp.
if (type == resource_type(r) && !strcmp(r->name, name))
It should have been replaced with devm_platform_ioremap_resource.
Fixes: bd69058f50d5 ("net: ll_temac: Use devm_platform_ioremap_resource_byname()")
Signed-off-by: Claus Hansen Ries <chr@terma.com>
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/cca18f9c630a41c18487729770b492bb@terma.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The IO subsystem expects a driver to retry a ccw_device_start, when the
subsequent interrupt response block (irb) contains a deferred
condition code 1.
Symptoms before this commit:
On the read channel we always trigger the next read anyhow, so no
different behaviour here.
On the write channel we may experience timeout errors, because the
expected reply will never be received without the retry.
Other callers of qeth_send_control_data() may wrongly assume that the ccw
was successful, which may cause problems later.
Note that since
commit 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
and
commit 5ef1dc40ffa6 ("s390/cio: fix invalid -EBUSY on ccw_device_start")
deferred CC1s are much more likely to occur. See the commit message of the
latter for more background information.
Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Co-developed-by: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Link: https://lore.kernel.org/r/20240321115337.3564694-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Indent config option type by a tab. It helps Kconfig parsers
to read file without error.
Fixes: 9431063ad323 ("dpll: core: Add DPLL framework base functions")
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240322114819.1801795-1-ppandit@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
armada_370_xp_msi_reenable_percpu() is only defined when CONFIG_PCI_MSI is
enabled, and only called when SMP is enabled.
Without CONFIG_SMP, there are no callers, which results in a build time
warning instead:
drivers/irqchip/irq-armada-370-xp.c:319:13: error: 'armada_370_xp_msi_reenable_percpu' defined but not used [-Werror=unused-function]
319 | static void armada_370_xp_msi_reenable_percpu(void) {}
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Mark the function as __maybe_unused to avoid adding more complexity
to the #ifdefs.
Fixes: 8ca61cde32c1 ("irqchip/armada-370-xp: Enable MSI affinity configuration")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240322125838.901649-1-arnd@kernel.org
|
|
The session resources are used by FW and driver when session is offloaded,
once session is uploaded these resources are not used. The lock is not
required as these fields won't be used any longer. The offload and upload
calls are sequential, hence lock is not required.
This will suppress following BUG_ON():
[ 449.843143] ------------[ cut here ]------------
[ 449.848302] kernel BUG at mm/vmalloc.c:2727!
[ 449.853072] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[ 449.858712] CPU: 5 PID: 1996 Comm: kworker/u24:2 Not tainted 5.14.0-118.el9.x86_64 #1
Rebooting.
[ 449.867454] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.3.4 11/08/2016
[ 449.876966] Workqueue: fc_rport_eq fc_rport_work [libfc]
[ 449.882910] RIP: 0010:vunmap+0x2e/0x30
[ 449.887098] Code: 00 65 8b 05 14 a2 f0 4a a9 00 ff ff 00 75 1b 55 48 89 fd e8 34 36 79 00 48 85 ed 74 0b 48 89 ef 31 f6 5d e9 14 fc ff ff 5d c3 <0f> 0b 0f 1f 44 00 00 41 57 41 56 49 89 ce 41 55 49 89 fd 41 54 41
[ 449.908054] RSP: 0018:ffffb83d878b3d68 EFLAGS: 00010206
[ 449.913887] RAX: 0000000080000201 RBX: ffff8f4355133550 RCX: 000000000d400005
[ 449.921843] RDX: 0000000000000001 RSI: 0000000000001000 RDI: ffffb83da53f5000
[ 449.929808] RBP: ffff8f4ac6675800 R08: ffffb83d878b3d30 R09: 00000000000efbdf
[ 449.937774] R10: 0000000000000003 R11: ffff8f434573e000 R12: 0000000000001000
[ 449.945736] R13: 0000000000001000 R14: ffffb83da53f5000 R15: ffff8f43d4ea3ae0
[ 449.953701] FS: 0000000000000000(0000) GS:ffff8f529fc80000(0000) knlGS:0000000000000000
[ 449.962732] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 449.969138] CR2: 00007f8cf993e150 CR3: 0000000efbe10003 CR4: 00000000003706e0
[ 449.977102] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 449.985065] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 449.993028] Call Trace:
[ 449.995756] __iommu_dma_free+0x96/0x100
[ 450.000139] bnx2fc_free_session_resc+0x67/0x240 [bnx2fc]
[ 450.006171] bnx2fc_upload_session+0xce/0x100 [bnx2fc]
[ 450.011910] bnx2fc_rport_event_handler+0x9f/0x240 [bnx2fc]
[ 450.018136] fc_rport_work+0x103/0x5b0 [libfc]
[ 450.023103] process_one_work+0x1e8/0x3c0
[ 450.027581] worker_thread+0x50/0x3b0
[ 450.031669] ? rescuer_thread+0x370/0x370
[ 450.036143] kthread+0x149/0x170
[ 450.039744] ? set_kthread_struct+0x40/0x40
[ 450.044411] ret_from_fork+0x22/0x30
[ 450.048404] Modules linked in: vfat msdos fat xfs nfs_layout_nfsv41_files rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver dm_service_time qedf qed crc8 bnx2fc libfcoe libfc scsi_transport_fc intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp dcdbas rapl intel_cstate intel_uncore mei_me pcspkr mei ipmi_ssif lpc_ich ipmi_si fuse zram ext4 mbcache jbd2 loop nfsv3 nfs_acl nfs lockd grace fscache netfs irdma ice sd_mod t10_pi sg ib_uverbs ib_core 8021q garp mrp stp llc mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt mxm_wmi fb_sys_fops cec crct10dif_pclmul ahci crc32_pclmul bnx2x drm ghash_clmulni_intel libahci rfkill i40e libata megaraid_sas mdio wmi sunrpc lrw dm_crypt dm_round_robin dm_multipath dm_snapshot dm_bufio dm_mirror dm_region_hash dm_log dm_zero dm_mod linear raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid6_pq libcrc32c crc32c_intel raid1 raid0 iscsi_ibft squashfs be2iscsi bnx2i cnic uio cxgb4i cxgb4 tls
[ 450.048497] libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi edd ipmi_devintf ipmi_msghandler
[ 450.159753] ---[ end trace 712de2c57c64abc8 ]---
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20240315071427.31842-1-skashyap@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 857cc04cdf50 ("i2c: i801: Add helper i801_get_block_len")
introduced a slight functional change: the status variable is now
overwritten with the length of an SMBUS tranasaction,
even in case of success.
This breaks the touchpad on at least my Lenovo P1:
rmi4_physical rmi4-00: Read PDT entry at 0x00e9 failed, code: -6.
rmi4_physical rmi4-00: RMI initial reset failed! Continuing in spite of this.
rmi4_physical rmi4-00: Read PDT entry at 0x00e9 failed, code: -6.
rmi4_physical rmi4-00: IRQ counting failed with code -6.
Fixes: 857cc04cdf50 ("i2c: i801: Add helper i801_get_block_len")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
There is a problem when a driver requests a shared interrupt line to run a
threaded handler on it without IRQF_ONESHOT set if that flag has been set
already for the IRQ in question by somebody else. Namely, the request
fails which usually leads to a probe failure even though the driver might
have worked just fine with IRQF_ONESHOT, but it does not want to use it by
default. Currently, the only way to handle this is to try to request the
IRQ without IRQF_ONESHOT, but with IRQF_PROBE_SHARED set and if this fails,
try again with IRQF_ONESHOT set. However, this is a bit cumbersome and not
very clean.
When commit 7a36b901a6eb ("ACPI: OSL: Use a threaded interrupt handler for
SCI") switched the ACPI subsystem over to using a threaded interrupt
handler for the SCI, it had to use IRQF_ONESHOT for it because that's
required due to the way the SCI handler works (it needs to walk all of the
enabled GPEs before the interrupt line can be unmasked). The SCI interrupt
line is not shared with other users very often due to the SCI handling
overhead, but on sone systems it is shared and when the other user of it
attempts to install a threaded handler, a flags mismatch related to
IRQF_ONESHOT may occur.
As it turned out, that happened to the pinctrl-amd driver and so commit
4451e8e8415e ("pinctrl: amd: Add IRQF_ONESHOT to the interrupt request")
attempted to address the issue by adding IRQF_ONESHOT to the interrupt
flags in that driver, but this is now causing an IRQF_ONESHOT-related
mismatch to occur on another system which cannot boot as a result of it.
Clearly, pinctrl-amd can work with IRQF_ONESHOT if need be, but it should
not set that flag by default, so it needs a way to indicate that to the
interrupt subsystem.
To that end, introdcuce a new interrupt flag, IRQF_COND_ONESHOT, which will
only have effect when the IRQ line is shared and IRQF_ONESHOT has been set
for it already, in which case it will be promoted to the latter.
This is sufficient for drivers sharing the interrupt line with the SCI as
it is requested by the ACPI subsystem before any drivers are probed, so
they will always see IRQF_ONESHOT set for the interrupt in question.
Fixes: 4451e8e8415e ("pinctrl: amd: Add IRQF_ONESHOT to the interrupt request")
Reported-by: Francisco Ayala Le Brun <francisco@videowindow.eu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: 6.8+ <stable@vger.kernel.org> # 6.8+
Closes: https://lore.kernel.org/lkml/CAN-StX1HqWqi+YW=t+V52-38Mfp5fAz7YHx4aH-CQjgyNiKx3g@mail.gmail.com/
Link: https://lore.kernel.org/r/12417336.O9o76ZdvQC@kreacher
|
|
Commit fc663711b944 ("scsi: core: Remove the /proc/scsi/${proc_name}
directory earlier") fixed a bug related to modules loading/unloading, by
adding a call to scsi_proc_hostdir_rm() on scsi_remove_host(). But that led
to a potential duplicate call to the hostdir_rm() routine, since it's also
called from scsi_host_dev_release(). That triggered a regression report,
which was then fixed by commit be03df3d4bfe ("scsi: core: Fix a procfs host
directory removal regression"). The fix just dropped the hostdir_rm() call
from dev_release().
But it happens that this proc directory is created on scsi_host_alloc(),
and that function "pairs" with scsi_host_dev_release(), while
scsi_remove_host() pairs with scsi_add_host(). In other words, it seems the
reason for removing the proc directory on dev_release() was meant to cover
cases in which a SCSI host structure was allocated, but the call to
scsi_add_host() didn't happen. And that pattern happens to exist in some
error paths, for example.
Syzkaller causes that by using USB raw gadget device, error'ing on
usb-storage driver, at usb_stor_probe2(). By checking that path, we can see
that the BadDevice label leads to a scsi_host_put() after a SCSI host
allocation, but there's no call to scsi_add_host() in such path. That leads
to messages like this in dmesg (and a leak of the SCSI host proc
structure):
usb-storage 4-1:87.51: USB Mass Storage device detected
proc_dir_entry 'scsi/usb-storage' already registered
WARNING: CPU: 1 PID: 3519 at fs/proc/generic.c:377 proc_register+0x347/0x4e0 fs/proc/generic.c:376
The proper fix seems to still call scsi_proc_hostdir_rm() on dev_release(),
but guard that with the state check for SHOST_CREATED; there is even a
comment in scsi_host_dev_release() detailing that: such conditional is
meant for cases where the SCSI host was allocated but there was no calls to
{add,remove}_host(), like the usb-storage case.
This is what we propose here and with that, the error path of usb-storage
does not trigger the warning anymore.
Reported-by: syzbot+c645abf505ed21f931b5@syzkaller.appspotmail.com
Fixes: be03df3d4bfe ("scsi: core: Fix a procfs host directory removal regression")
Cc: stable@vger.kernel.org
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Link: https://lore.kernel.org/r/20240313113006.2834799-1-gpiccoli@igalia.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Framebuffer I/O on the Sparc Sbus requires read/write helpers for
I/O memory. Select FB_IOMEM_FOPS accordingly.
Reported-by: Nick Bowler <nbowler@draconx.ca>
Closes: https://lore.kernel.org/lkml/5bc21364-41da-a339-676e-5bb0f4faebfb@draconx.ca/
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 8813e86f6d82 ("fbdev: Remove default file-I/O implementations")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240322083005.24269-1-tzimmermann@suse.de
|
|
Backmerging to get drm-misc-fixes to the state of v6.9-rc1.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
