summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-01-09wcn36xx: fix incorrect assignment to msg_body.min_ch_timeColin Ian King
The second assignment to msg_body.min_ch_time is incorrect, it should actually be to msg_body.max_ch_time. Thanks to Bjorn Andersson for identifying the correct way to fix this as my original fix was incorrect. Detected by CoverityScan, CID#1463042 ("Unused Value") Fixes: 2f3bef4b247e ("wcn36xx: Add hardware scan offload support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-09ath10k: bugfix: add USB case in ath10k_core_probe_fwErik Stromdahl
It was accidentally left out from the switch statement and target info was not queried. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> [kvalo@codeaurora.org: add commit log] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-09ath10k: remove unused prototypeErik Stromdahl
The function does not exist and thus, the prototype can be removed. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-09ath10k: fix spelling errorErik Stromdahl
Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-09wil6210: remove reference to preset_chandefLior David
The field preset_chandef of wireless_dev must not be accessed by the driver because it is private to cfg80211. Store the monitor channel locally in wil6210_priv instead. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-09wil6210: remove leftover "FIXME"sDedy Lansky
"FIXME: IRQ mask debug" and "FIXME: interrupts enabled - for debug" can be removed because wil6210_debug_irq_mask() is now considered production feature. "FIXME FW can transmit only ucast frames to peer" and "FIXME real ring_id instead of hard coded 0" can be removed because FW/HW already support multicast transmission. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-09wil6210: prevent parallel suspend and dump collectionMaya Erez
Suspend and crash dump operations can happen simultaneously in case there is a FW assert during the suspend procedure or when SSR calls all the devices crashdump callbacks. To prevent that, a new flag is added, indicating that the dumps collection is in progress, in order to allow the suspend/reset decline if the dumps collection already started. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-09wil6210: set platform features based on FW capabilitiesMaya Erez
In some cases the platform should be aware of the FW capabilities to decide which feature to enable. For example, FW can control the external REF clock for power saving. Driver should notify the platform about that, to allow platform power management optimization. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-09wil6210: add platform capabilities bitmapMaya Erez
Add get_capa callback to platform ops to allow reading the platform capabilities. Supported capabilities: - Keeping 11ad connection during suspend - T_POWER_ON 0 support - Usage of external clock Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-09wil6210: support 40bit DMA addressesLazar Alexei
Add the option to support 40bit addresses since some platforms may not support 48bits but support 40bits Signed-off-by: Lazar Alexei <qca_ailizaro@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-09wil6210: support Scheduled scanDedy Lansky
Add support for sched_scan_start/stop by sending PNO commands to FW. Driver reports max_sched_scan_reqs and invokes cfg80211_sched_scan_results upon receiving WMI_SCHED_SCAN_RESULT_EVENTID from FW. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-27ath10k: update copyright yearKalle Valo
Update year for Qualcomm Atheros, Inc. copyrights. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: add memory dump support QCA988XKalle Valo
Copy two regions of registers and bigger DRAM region to the dump file. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: add memory dump support for QCA6174/QCA9377Alan Liu
Add memory dump to the firmware crash data file which is provided to user space via devcoredump interface. This makes it easier for firmware engineers to debug firmware crashes. Due to increased memory consumption the memory dump is disabled by default. To enable it make sure that bit 3 is set in coredump_mask module parameter: modprobe ath10k_core coredump_mask=0xffffffff When RAMDUMP is enabled a buffer for the dump is allocated with vmalloc during device probe. The actual memory layout is different in hardware versions and the layouts are defined in coredump.c. The memory is split to regions and, to get even finegrained control of what to copy, the region can split to smaller sections as not all registers are readable (which could cause the whole system to stall). Signed-off-by: Alan Liu <alanliu@qca.qualcomm.com> [kvalo@qca.qualcomm.com: refactoring and cleanup] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: add coredump_mask module parameterKalle Valo
For memory dump support (it consumes quite a lot of memory) we need to control what is exactly stored to the crash dump. Add a module parameter call coredump_mask to do that. It's a bit mask of these values: enum ath10k_fw_crash_dump_type { ATH10K_FW_CRASH_DUMP_REGISTERS = 0, ATH10K_FW_CRASH_DUMP_CE_DATA = 1, ATH10K_FW_CRASH_DUMP_MAX, }; For example, if we only want to store CE_DATA we would enable bit 2: modprobe ath10k_core coredump_mask=0x2 Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: detach coredump.c from debug.cKalle Valo
Now coredump is totally separate from debug.c and doesn't depend on CONFIG_ATH10K_DEBUGFS anymore, only on CONFIG_DEV_COREDUMP. Also remove leftovers from the removed debugfs file support. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: refactor firmware crashdump code to coredump.cKalle Valo
In preparation to add RAM dump support. No functional changes, only moving code and renaming function names. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: remove deprecated fw_crash_dump debugfs fileKalle Valo
The fw_crash_dump file was deprecated by commmit 727000e6af34 ("ath10k: support dev_coredump for crash dump") in v4.11 in favor of dev_coredump interface, remove it now for good. Everyone should use dev_coredump now. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: advertise TDLS wider bandwidth support for 5GHzBalaji Pothunoori
Enable TDLS wider bandwidth support for 5GHz based on firmware wmi capabilities. This patch is required for chipset QCA9888. Tested with firmware version 10.4-3.5.1-00018. Signed-off-by: Balaji Pothunoori <bpothuno@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: Add fw feature flag for non-bmi firmware loadRakesh Pillai
HL1.0 firmware is not loaded via bmi. The bmi specific code should not be executed for HL1.0 Add fw feature flag for non bmi targets and skip the bmi specific code for non bmi targets. Signed-off-by: Rakesh Pillai <pillair@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: Add debug mask for SNOC bus typeGovind Singh
WCN3990 target uses SNOC bus. Add debug mask for SNOC bus type. Signed-off-by: Govind Singh <govinds@qti.qualcomm.com> Signed-off-by: Rakesh Pillai <pillair@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: Add SNOC bus type for WCN3990 targetGovind Singh
WCN3990 is integrated chipset which uses system NOC. Add SNOC bus type and related definitions. Signed-off-by: Govind Singh <govinds@qti.qualcomm.com> Signed-off-by: Rakesh Pillai <pillair@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: Add support for 64 bit ce descriptorGovind Singh
WCN3990 CE descriptor uses 64bit address for src/dst ring buffer. It has extended field for toeplitz hash result, which is being used for HW assisted hash results. To accommodate WCN3990 descriptor, define new CE descriptor for extended addressing mode and related methods to handle the descriptor data. Signed-off-by: Govind Singh <govinds@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: Use dma_addr_t for ce buffers to support 64bit targetGovind Singh
CE send and receive API's are using u32 ring address, which truncates the address for target with 64bit addressing range. Use dma_addr_t for ce buffers to support target with extended addressing range. Signed-off-by: Govind Singh <govinds@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: Add paddrs_ring_64 support for 64bit targetGovind Singh
paddrs_ring_64 holds the physical device address of the rx buffers that host SW provides for the MAC HW to fill. Since this field is used in rx ring setup and rx ring replenish in rx data path. Define separate methods for handling 64 bit ring paddr and attach them dynamically based on target_64bit hw param flag. Use u64 type while popping paddr from the rx hash table for 64bit target. Signed-off-by: Govind Singh <govinds@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: Add hw param for rx ring size supportGovind Singh
WCN3990 uses larger ring size in comparison to existing ring size value. Add rx ring size hw param for supporting different rx ring size across multiple target. Signed-off-by: Govind Singh <govinds@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: Add support for htt_data_tx_desc_64 descriptorGovind Singh
WCN3990 target uses 64 bit frags_paddr in htt tx descriptor, which holds the physical address of SKB fragments in tx data path. In order to support 64 bit bit frags_paddr in htt tx descriptor, define htt_data_tx_desc_64 descriptor and ath10k_htt_tx_64 method for handling tx data path with new descriptor fields. Signed-off-by: Govind Singh <govinds@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: Add support for 64 bit HTT frag descriptorGovind Singh
WCN3990 target uses 64 bit frag descriptor and more fields in TSO flag. Add support for 64 bit HTT frag descriptor. Signed-off-by: Govind Singh <govinds@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: Add support for 64 bit htt rx ring cfgGovind Singh
WCN3900 target uses 64bit rx_ring_base_paddr and fw_idx_shadow_reg_paddr fields in HTT rx ring cfg message. These address points to the memory region where remote ring empty buffers are allocated. In order to add 64 bit htt rx ring cfg, define separate 64 bit htt rx ring cfg message and attach it in runtime based on target_64bit hw param flag. Signed-off-by: Govind Singh <govinds@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: Add support for 64 bit HTT in-order indication msgGovind Singh
WCN3990 target use 64bit msdu address in htt in-order indication message. Add support for 64 bit msdu address in HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND message. Signed-off-by: Govind Singh <govinds@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: Update rx descriptor for WCN3990 targetGovind Singh
WCN3990 rx descriptor uses different offset of msdu start, msdu end, ppdu end, rx pkt end and rx frag info. To accommodate different offsets, define respective fields in rx descriptor of WCN3990 target. Signed-off-by: Govind Singh <govinds@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: Add hw param for 64-bit address supportRakesh Pillai
WCN3990 target supports 37-bit addressing mode. In order to accommodate extended address support, add hw param to indicate if the target supports addressing above 32-bits. Signed-off-by: Rakesh Pillai <pillair@qti.qualcomm.com> Signed-off-by: Govind Singh <govinds@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27wil6210: fix build warnings without CONFIG_PMArnd Bergmann
The #ifdef checks are hard to get right, in this case some functions should have been left inside a CONFIG_PM_SLEEP check as seen by this message: drivers/net/wireless/ath/wil6210/pcie_bus.c:489:12: error: 'wil6210_pm_resume' defined but not used [-Werror=unused-function] drivers/net/wireless/ath/wil6210/pcie_bus.c:484:12: error: 'wil6210_pm_suspend' defined but not used [-Werror=unused-function] Using an __maybe_unused is easier here, so I'm replacing all the other #ifdef in this file as well for consistency. Fixes: 94162666cd51 ("wil6210: run-time PM when interface down") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: wmi: remove redundant integer fcColin Ian King
Variable fc is being assigned but never used, so remove it. Cleans up the clang warning: warning: Value stored to 'fc' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-19Merge branch 'nfp-flower-add-Geneve-tunnel-support'David S. Miller
Simon Horman says: ==================== nfp: flower: add Geneve tunnel support John Hurley says: This patchset adds support for offloading the encap and decap of Geneve tunnels to the NFP. In both cases, specifying well known port 6081 is a requirement for rule offload. Geneve firmware support has been recently added, so the patchset includes the reading of a fw symbol that defines a bitmap of newly supported features. Geneve will only be offloaded if the fw supports it. The new symbol is added in fw r5646. Geneve option fields are not supported as either a match or an action due there current exclussion from TC flower. Because Geneve (as both a match and action) behaves the same as other udp tunnels such as VXLAN, generic functions are created that handle both Geneve and VXLAN. It is anticapated that these functions will be modified to support options in future patches. The removal of an unused variable 'tun_dst_mask' is included as a separate patch here. This does not affect functionality. Also included are modifications to the test framework to check that the new encap and decap features are functioning correctly. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19nfp: flower: compile Geneve encap actionsJohn Hurley
Generate rules for the NFP to encapsulate packets in Geneve tunnels. Move the vxlan action code to generic udp tunnel actions and use core code for both vxlan and Geneve. Only support outputting to well known port 6081. Setting tunnel options is not supported yet. Only attempt to offload if the fw supports Geneve. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19nfp: flower: compile Geneve match fieldsJohn Hurley
Compile Geneve match fields for offloading to the NFP. The addition of Geneve overflows the 8 bit key_layer field, so apply extended metadata to the match cmsg allowing up to 32 more key_layer fields. Rather than adding new Geneve blocks, move the vxlan code to generic ipv4 udp tunnel structs and use these for both vxlan and Geneve. Matches are only supported when specifically mentioning well known port 6081. Geneve tunnel options are not yet included in the match. Only offload Geneve if the fw supports it - include check for this. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19nfp: flower: read extra feature support from fwJohn Hurley
Extract the _abi_flower_extra_features symbol from the fw which gives a 64 bit bitmap of new features (on top of the flower base support) that the fw can offload. Store this bitmap in the priv data associated with each app. If the symbol does not exist, set the bitmap to 0. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19nfp: flower: remove unused tun_mask variableJohn Hurley
The tunnel dest IP is required for separate offload to the NFP. It is already verified that a dest IP must be present and must be an exact match in the flower rule. Therefore, we can just extract the IP from the generated offload rule and remove the unused mask variable. The function is then no longer required to return the IP separately. Because tun_dst is localised to tunnel matches, move the declaration to the tunnel if branch. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19cxgb4: RSS table is 4k for T6Ganesh Goudar
RSS table is 4k for T6 and later cards, add check for the same. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19net_sched: properly check for empty skb array on error pathCong Wang
First, the check of &q->ring.queue against NULL is wrong, it is always false. We should check the value rather than the address. Secondly, we need the same check in pfifo_fast_reset() too, as both ->reset() and ->destroy() are called in qdisc_destroy(). Fixes: c5ad119fb6c0 ("net: sched: pfifo_fast use skb_array") Reported-by: syzbot <syzkaller@googlegroups.com> Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19ibmvnic: Include header descriptor support for ARP packetsThomas Falcon
In recent tests with new adapters, it was discovered that ARP packets were not being properly processed. This patch adds support for ARP packet headers to be passed to backing adapters, if necessary. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19Merge branch 'ibmvnic-Fix-and-increase-maximum-TX-RX-queues'David S. Miller
Thomas Falcon says: ==================== ibmvnic: Fix and increase maximum TX/RX queues This series renames IBMVNIC_MAX_TX_QUEUES to IBMVNIC_MAX_QUEUES since it is used to allocate both RX and TX queues. The value is also increased to accommodate newer hardware. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19ibmvnic: Increase maximum number of RX/TX queuesThomas Falcon
Increase the number of queues allocated to accommodate recent network adapter inclusions on the IBM vNIC platform. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19ibmvnic: Rename IBMVNIC_MAX_TX_QUEUES to IBMVNIC_MAX_QUEUESThomas Falcon
This value denotes the maximum number of TX queues but is used to allocate both RX and TX queues. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19Merge tag 'wireless-drivers-next-for-davem-2017-12-18' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next The drivers/net/wireless/intel/iwlwifi/pcie/drv.c conflict was resolved using a diff provided by Kalle in his pull request. Kalle Valo says: ==================== wireless-drivers-next patches for 4.16 A bigger pull request this time, the most visible change being the new driver mt76. But there's also Kconfig refactoring in ath9k and ath10k, work beginning in iwlwifi to have rate scaling in firmware/hardware, wcn3990 support getting closer in ath10k and lots of smaller changes. mt76 * a new driver for MT76x2e, a 2x2 PCIe 802.11ac chipset by MediaTek ath10k * enable multiqueue support for all hw using mac80211 wake_tx_queue op * new Kconfig option ATH10K_SPECTRAL to save RAM * show tx stats on QCA9880 * new qcom,ath10k-calibration-variant DT entry * WMI layer support for wcn3990 ath9k * new Kconfig option ATH9K_COMMON_SPECTRAL to save RAM wcn36xx * hardware scan offload support wil6210 * run-time PM support when interface is down iwlwifi * initial work for rate-scaling offload * Support for new FW API version 36 * Rename the temporary hw name A000 to 22000 ssb * make SSB a menuconfig to ease disabling it all mwl8k * enable non-DFS 5G channels 149-165 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19cxgb4: Report tid start range correctly for T6Ganesh Goudar
For T6, tid start range should be read from LE_DB_ACTIVE_TABLE_START_INDEX_A register. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2017-12-18 Here's the first bluetooth-next pull request for the 4.16 kernel. - hci_ll: multiple cleanups & fixes - Remove Gustavo Padovan from the MAINTAINERS file - Support BLE Adversing while connected (if the controller can do it) - DT updates for TI chips - Various other smaller cleanups & fixes Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19net: ks8851: Support DT-provided MAC addressLukas Wunner
Allow the boot loader to specify the MAC address in the device tree to override the EEPROM, or in case no EEPROM is present. Cc: Ben Dooks <ben@simtec.co.uk> Cc: Tristram Ha <tristram.ha@micrel.com> Cc: David J. Choi <david.choi@micrel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19Merge branch 'bcm63xx_enet-remove-mac_id-usage'David S. Miller
Jonas Gorski says: ==================== bcm63xx_enet: remove mac_id usage This patchset aims at reducing the platform device id number usage with the target of making it eventually possible to probe the driver through OF. Runtested on BCM6358. Since the patches touch mostly net/, they should go through net-next. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-16 12:20:31 +0000