Age | Commit message (Collapse) | Author |
|
Handled faults can be "normal", don't spam dmesg about them.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Link: https://lore.kernel.org/r/20240701162025.375134-3-robdclark@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
For consistency, add the "CB" prefix to the bitfield defines for context
registers.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Link: https://lore.kernel.org/r/20240701162025.375134-2-robdclark@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
With ARCH=arm64, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-test.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Fixes: da55da5a42d4 ("iommu/arm-smmu-v3: Make the kunit into a module")
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240613-md-arm64-drivers-iommu-arm-arm-smmu-v3-v1-1-0e9f7584a5c8@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The top of the 2 level stream table is (at most) 128k entries big, and two
high order allocations are required. One of __le64 which is programmed
into the HW (1M), and one of struct arm_smmu_strtab_l1_desc which holds
the CPU pointer (3M).
There is no reason to store the l2ptr_dma as nothing reads it. devm stores
a copy of it and the DMA memory will be freed via devm mechanisms. span is
a constant of 8+1. Remove both.
This removes 16 bytes from each arm_smmu_l1_ctx_desc and saves up to 2M of
memory per iommu instance.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/2-v2-318ed5f6983b+198f-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
dmam_alloc_coherent() already returns zero'd memory so cfg->strtab.l1_desc
(the list of DMA addresses for the L2 entries) is already zero'd.
arm_smmu_init_l1_strtab() goes through and calls
arm_smmu_write_strtab_l1_desc() on the newly allocated (and zero'd) struct
arm_smmu_strtab_l1_desc, which ends up computing 'val = 0' and zeroing it
again.
Remove arm_smmu_init_l1_strtab() and just call devm_kcalloc() from
arm_smmu_init_strtab_2lvl to allocate the companion struct.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/1-v2-318ed5f6983b+198f-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The SVA cleanup made the SSID logic entirely general so all we need to do
is call it with the correct cd table entry for a S1 domain.
This is slightly tricky because of the ASID and how the locking works, the
simple fix is to just update the ASID once we get the right locks.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/14-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
If the STE doesn't point to the CD table we can upgrade it by
reprogramming the STE with the appropriate S1DSS. We may also need to turn
on ATS at the same time.
Keep track if the installed STE is pointing at the cd_table and the ATS
state to trigger this path.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/13-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
S1DSS brings in quite a few new transition pairs that are
interesting. Test to/from S1DSS_BYPASS <-> S1DSS_SSID0, and
BYPASS <-> S1DSS_SSID0.
Test a contrived non-hitless flow to make sure that the logic works.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/12-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The HW supports this, use the S1DSS bits to configure the behavior
of SSID=0 which is the RID's translation.
If SSID's are currently being used in the CD table then just update the
S1DSS bits in the STE, remove the master_domain and leave ATS alone.
For iommufd the driver design has a small problem that all the unused CD
table entries are set with V=0 which will generate an event if VFIO
userspace tries to use the CD entry. This patch extends this problem to
include the RID as well if PASID is being used.
For BLOCKED with used PASIDs the
F_STREAM_DISABLED (STRTAB_STE_1_S1DSS_TERMINATE) event is generated on
untagged traffic and a substream CD table entry with V=0 (removed pasid)
will generate C_BAD_CD. Arguably there is no advantage to using S1DSS over
the CD entry 0 with V=0.
As we don't yet support PASID in iommufd this is a problem to resolve
later, possibly by using EPD0 for unused CD table entries instead of V=0,
and not using S1DSS for BLOCKED.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/11-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This removes all the notifier de-duplication logic in the driver and
relies on the core code to de-duplicate and allocate only one SVA domain
per mm per smmu instance. This naturally gives a 1:1 relationship between
SVA domain and mmu notifier.
It is a significant simplication of the flow, as we end up with a single
struct arm_smmu_domain for each MM and the invalidation can then be
shifted to properly use the masters list like S1/S2 do.
Remove all of the previous mmu_notifier, bond, shared cd, and cd refcount
logic entirely.
The logic here is tightly wound together with the unusued BTM
support. Since the BTM logic requires holding all the iommu_domains in a
global ASID xarray it conflicts with the design to have a single SVA
domain per PASID, as multiple SMMU instances will need to have different
domains.
Following patches resolve this by making the ASID xarray per-instance
instead of global. However, converting the BTM code over to this
methodology requires many changes.
Thus, since ARM_SMMU_FEAT_BTM is never enabled, remove the parts of the
BTM support for ASID sharing that interact with SVA as well.
A followup series is already working on fully enabling the BTM support,
that requires iommufd's VIOMMU feature to bring in the KVM's VMID as
well. It will come with an already written patch to bring back the ASID
sharing using a per-instance ASID xarray.
https://lore.kernel.org/linux-iommu/20240208151837.35068-1-shameerali.kolothum.thodi@huawei.com/
https://lore.kernel.org/linux-iommu/26-v6-228e7adf25eb+4155-smmuv3_newapi_p2_jgg@nvidia.com/
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/10-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Fill in the smmu_domain->devices list in the new struct arm_smmu_domain
that SVA allocates. Keep track of every SSID and master that is using the
domain reusing the logic for the RID attach.
This is the first step to making the SVA invalidation follow the same
design as S1/S2 invalidation. At present nothing will read this list.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/9-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently the SVA domain is a naked struct iommu_domain, allocate a struct
arm_smmu_domain instead.
This is necessary to be able to use the struct arm_master_domain
mechanism.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/8-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Allow creating and managing arm_smmu_mater_domain's with a non-zero SSID
through the arm_smmu_attach_*() family of functions. This triggers ATC
invalidation for the correct SSID in PASID cases and tracks the
per-attachment SSID in the struct arm_smmu_master_domain.
Generalize arm_smmu_attach_remove() to be able to remove SSID's as well by
ensuring the ATC for the PASID is flushed properly.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
We no longer need a master->sva_enable to control what attaches are
allowed. Instead we can tell if the attach is legal based on the current
configuration of the master.
Keep track of the number of valid CD entries for SSID's in the cd_table
and if the cd_table has been installed in the STE directly so we know what
the configuration is.
The attach logic is then made into:
- SVA bind, check if the CD is installed
- RID attach of S2, block if SSIDs are used
- RID attach of IDENTITY/BLOCKING, block if SSIDs are used
arm_smmu_set_pasid() is already checking if it is possible to setup a CD
entry, at this patch it means the RID path already set a STE pointing at
the CD table.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Prepare to allow a S1 domain to be attached to a PASID as well. Keep track
of the SSID the domain is using on each master in the
arm_smmu_master_domain.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The core code allows the domain to be changed on the fly without a forced
stop in BLOCKED/IDENTITY. In this flow the driver should just continually
maintain the ATS with no change while the STE is updated.
ATS relies on a linked list smmu_domain->devices to keep track of which
masters have the domain programmed, but this list is also used by
arm_smmu_share_asid(), unrelated to ats.
Create two new functions to encapsulate this combined logic:
arm_smmu_attach_prepare()
<caller generates and sets the STE>
arm_smmu_attach_commit()
The two functions can sequence both enabling ATS and disabling across
the STE store. Have every update of the STE use this sequence.
Installing a S1/S2 domain always enables the ATS if the PCIe device
supports it.
The enable flow is now ordered differently to allow it to be hitless:
1) Add the master to the new smmu_domain->devices list
2) Program the STE
3) Enable ATS at PCIe
4) Remove the master from the old smmu_domain
This flow ensures that invalidations to either domain will generate an ATC
invalidation to the device while the STE is being switched. Thus we don't
need to turn off the ATS anymore for correctness.
The disable flow is the reverse:
1) Disable ATS at PCIe
2) Program the STE
3) Invalidate the ATC
4) Remove the master from the old smmu_domain
Move the nr_ats_masters adjustments to be close to the list
manipulations. It is a count of the number of ATS enabled masters
currently in the list. This is stricly before and after the STE/CD are
revised, and done under the list's spin_lock.
This is part of the bigger picture to allow changing the RID domain while
a PASID is in use. If a SVA PASID is relying on ATS to function then
changing the RID domain cannot just temporarily toggle ATS off without
also wrecking the SVA PASID. The new infrastructure here is organized so
that the PASID attach/detach flows will make use of it as well in
following patches.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The next patch will need to store the same master twice (with different
SSIDs), so allocate memory for each list element.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add arm_smmu_set_pasid()/arm_smmu_remove_pasid() which are to be used by
callers that already constructed the arm_smmu_cd they wish to program.
These functions will encapsulate the shared logic to setup a CD entry that
will be shared by SVA and S1 domain cases.
Prior fixes had already moved most of this logic up into
__arm_smmu_sva_bind(), move it to it's final home.
Following patches will relieve some of the remaining SVA restrictions:
- The RID domain is a S1 domain and has already setup the STE to point to
the CD table
- The programmed PASID is the mm_get_enqcmd_pasid()
- Nothing changes while SVA is running (sva_enable)
SVA invalidation will still iterate over the S1 domain's master list,
later patches will resolve that.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This allows the driver the receive the mm and always a device during
allocation. Later patches need this to properly setup the notifier when
the domain is first allocated.
Remove ops->domain_alloc() as SVA was the only remaining purpose.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240508151611.1444352-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Static checker is complaining about the ASID possibly set uninitialized.
This only happens in case of error and this value would be ignored anyway.
A simple fix would be just to initialize the local variable to zero,
this path will only be reached on the first attach to a domain where
the CD is already initialized to zero.
This avoids having to bloat the function with an error path.
Closes: https://lore.kernel.org/linux-iommu/849e3d77-0a3c-43c4-878d-a0e061c8cd61@moroto.mountain/T/#u
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Fixes: 04905c17f648 ("iommu/arm-smmu-v3: Build the whole CD in arm_smmu_make_s1_cd()")
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240604185218.2602058-1-smostafa@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- Add a quirk for three different devices that have shown issues with
LPM (link power management). These devices appear to not implement
LPM properly, since we see command timeouts when enabling LPM. The
quirk disables LPM for these problematic devices. (Me)
- Do not apply the Intel PCS quirk on Alder Lake. The quirk is not
needed and was originally added by mistake when LPM support was
enabled for this AHCI controller. Enabling the quirk when not needed
causes the the controller to not be able to detect the connected
devices on some platforms.
* tag 'ata-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: Add ATA_HORKAGE_NOLPM for Apacer AS340
ata: libata-core: Add ATA_HORKAGE_NOLPM for AMD Radeon S3 SSD
ata: libata-core: Add ATA_HORKAGE_NOLPM for Crucial CT240BX500SSD1
ata: ahci: Do not apply Intel PCS quirk on Intel Alder Lake
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Miscellaneous topology parsing fixes:
- Fix topology parsing regression on older CPUs in the new AMD/Hygon
parser
- Fix boot crash on odd Intel Quark and similar CPUs that do not fill
out cpuinfo_x86::x86_clflush_size and zero out
cpuinfo_x86::x86_cache_alignment as a result.
Provide 32 bytes as a general fallback value.
- Fix topology enumeration on certain rare CPUs where the BIOS locks
certain CPUID leaves and the kernel unlocked them late, which broke
with the new topology parsing code. Factor out this unlocking logic
and move it earlier in the parsing sequence"
* tag 'x86-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/topology/intel: Unlock CPUID before evaluating anything
x86/cpu: Provide default cache line size if not enumerated
x86/topology/amd: Evaluate SMT in CPUID leaf 0x8000001e only on family 0x17 and greater
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Export a symbol to make life easier for instrumentation/debugging"
* tag 'sched-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/x86: Export 'percpu arch_freq_scale'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fix from Ingo Molnar:
"Add missing MODULE_DESCRIPTION() lines"
* tag 'perf-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Add missing MODULE_DESCRIPTION() lines
perf/x86/rapl: Add missing MODULE_DESCRIPTION() line
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- scsi: mpt3sas: Avoid possible run-time warning with long manufacturer
strings
- mailmap: update entry for Kees Cook
- kunit/fortify: Remove __kmalloc_node() test
* tag 'hardening-v6.10-rc2-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kunit/fortify: Remove __kmalloc_node() test
mailmap: update entry for Kees Cook
scsi: mpt3sas: Avoid possible run-time warning with long manufacturer strings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Enforce full ordering for ATOMIC operations with BPF_FETCH
- Fix uaccess build errors seen with GCC 13/14
- Fix build errors on ppc32 due to ARCH_HAS_KERNEL_FPU_SUPPORT
- Drop error message from lparcfg guest name lookup
Thanks to Christophe Leroy, Guenter Roeck, Nathan Lynch, Naveen N Rao,
Puranjay Mohan, and Samuel Holland.
* tag 'powerpc-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Limit ARCH_HAS_KERNEL_FPU_SUPPORT to PPC64
powerpc/uaccess: Use YZ asm constraint for ld
powerpc/uaccess: Fix build errors seen with GCC 13/14
powerpc/pseries/lparcfg: drop error message from guest name lookup
powerpc/bpf: enforce full ordering for ATOMIC operations with BPF_FETCH
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"After merging a commit 1fffe7a34c89 ("script: modpost: emit a warning
when the description is missing"), MODULE_DESCRIPTOR seems to be
mandatory for kernel modules. In FireWire subsystem, the most of
practical kernel modules have the field, while KUnit test modules do
not. A single patch is applied to fix them"
* tag 'firewire-fixes-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: add missing MODULE_DESCRIPTION() to test modules
|
|
Pull smb client fixes from Steve French:
"Two small smb3 fixes:
- Fix socket creation with sfu mount option (spotted by test generic/423)
- Minor cleanup: fix missing description in two files"
* tag '6.10-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix creating sockets when using sfu mount options
fs: smb: common: add missing MODULE_DESCRIPTION() macros
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix a Kconfig bug regarding comparisons to 'm' or 'n'
- Replace missed $(srctree)/$(src)
- Fix unneeded kallsyms step 3
- Remove incorrect "compatible" properties from image nodes in
image.fit
- Improve gen_kheaders.sh
- Fix 'make dt_binding_check'
- Clean up unnecessary code
* tag 'kbuild-fixes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
dt-bindings: kbuild: Fix dt_binding_check on unconfigured build
kheaders: use `command -v` to test for existence of `cpio`
kheaders: explicitly define file modes for archived headers
scripts/make_fit: Drop fdt image entry compatible string
kbuild: remove a stale comment about cleaning in link-vmlinux.sh
kbuild: fix short log for AS in link-vmlinux.sh
kbuild: change scripts/mksysmap into sed script
kbuild: avoid unneeded kallsyms step 3
kbuild: scripts/gdb: Replace missed $(srctree)/$(src) w/ $(src)
kconfig: remove redundant check in expr_join_or()
kconfig: fix comparison to constant symbols, 'm', 'n'
kconfig: remove unused expr_is_no()
|
|
Pull xfs fixes from Chandan Babu:
- Fix a livelock by dropping an xfarray sortinfo folio when an error
is encountered
- During extended attribute operations, Initialize transaction
reservation computation based on attribute operation code
- Relax symbolic link's ondisk verification code to allow symbolic
links with short remote targets
- Prevent soft lockups when unmapping file ranges and also during
remapping blocks during a reflink operation
- Fix compilation warnings when XFS is built with W=1 option
* tag 'xfs-6.10-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Add cond_resched to block unmap range and reflink remap path
xfs: don't open-code u64_to_user_ptr
xfs: allow symlinks with short remote targets
xfs: fix xfs_init_attr_trans not handling explicit operation codes
xfs: drop xfarray sortinfo folio on error
xfs: Stop using __maybe_unused in xfs_alloc.c
xfs: Clear W=1 warning in xfs_iwalk_run_callbacks()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty fix from Greg KH:
"Here is a single revert for a much-reported regression in 6.10-rc1
when it comes to a few older architectures.
Turns out that the VT ioctls don't work the same across all cpu types
because of some old compatibility requrements for stuff like alpha and
powerpc. So revert the change that attempted to have them use the
_IO() macros and go back to the known-working values instead.
This has NOT been in linux-next but has had many reports that it fixes
the issue with 6.10-rc1"
* tag 'tty-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "VT: Use macros to define ioctls"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fix from Mickaël Salaün:
"This fixes a wrong path walk triggered by syzkaller"
* tag 'landlock-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add layout1.refer_mount_root
landlock: Fix d_parent walk
|
|
This reverts commit 8c467f3300591a206fa8dcc6988d768910799872.
Turns out this breaks many architectures as the vt ioctls do not all
match up everywhere due to historical reasons, so the original commit is
invalid for many values.
Reported-by: Nick Bowler <nbowler@draconx.ca>
Reported-by: Arnd Bergmann <arnd@kernel.org>
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Gladkov <legion@kernel.org>
Link: https://lore.kernel.org/r/ad4e561c-1d49-4f25-882c-7a36c6b1b5c0@draconx.ca
Link: https://lore.kernel.org/r/0da9785e-ba44-4718-9d08-4e96c1ba7ab2@kernel.org
Link: https://lore.kernel.org/all/34d848f4-670b-4493-bf21-130ef862521b@xenosoft.de/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull drm fixes from Dave Airlie:
"This is the weekly fixes. Lots of small fixes across the board, one
BUG_ON fix in shmem seems most important, otherwise amdgpu, i915, xe
mostly with small fixes to all the other drivers.
shmem:
- fix BUG_ON in COW handling
- warn when trying to pin imported objects
buddy:
- fix page size handling
dma-buf:
- sw-sync: Don't interfere with IRQ handling
- fix kthreads-handling error path
i915:
- fix a race in audio component by registering it later
- make DPT object unshrinkable to avoid shrinking when framebuffer
has not shrunk
- fix CCS id calculation to fix a perf regression
- fix selftest caching mode
- fix FIELD_PREP compiler warnings
- fix indefinite wait for GT wakeref release
- revert overeager multi-gt pm reference removal
xe:
- pcode polling timeout change
- fix for deadlocks for faulting VMs
- error-path lock imbalance fix
amdgpu:
- RAS fix
- fix colorspace property for MST connectors
- fix for PCIe DPM
- silence UBSAN warning
- GPUVM robustness fix
- partition fix
- drop deprecated I2C_CLASS_SPD
amdkfd:
- revert unused changes for certain 11.0.3 devices
- simplify APU VRAM handling
lima:
- fix dma_resv-related deadlock in object pin
msm:
- remove build-time dependency on Python 3.9
nouveau:
- nvif: Fix possible integer overflow
panel:
- lg-sw43408: Select DP helpers; Declare backlight ops as static
- sitronix-st7789v: Various fixes for jt240mhqs_hwt_ek_e3 panel
panfrost:
- fix dma_resv-related deadlock in object pin"
* tag 'drm-fixes-2024-06-01' of https://gitlab.freedesktop.org/drm/kernel: (35 commits)
drm/msm: remove python 3.9 dependency for compiling msm
drm/panel: sitronix-st7789v: fix display size for jt240mhqs_hwt_ek_e3 panel
drm/panel: sitronix-st7789v: tweak timing for jt240mhqs_hwt_ek_e3 panel
drm/panel: sitronix-st7789v: fix timing for jt240mhqs_hwt_ek_e3 panel
drm/amd/pm: remove deprecated I2C_CLASS_SPD support from newly added SMU_14_0_2
drm/amdgpu: Make CPX mode auto default in NPS4
drm/amdkfd: simplify APU VRAM handling
Revert "drm/amdkfd: fix gfx_target_version for certain 11.0.3 devices"
drm/amdgpu: fix dereference null return value for the function amdgpu_vm_pt_parent
drm/amdgpu: silence UBSAN warning
drm/amdgpu: Adjust logic in amdgpu_device_partner_bandwidth()
drm/i915: Fix audio component initialization
drm/i915/dpt: Make DPT object unshrinkable
drm/i915/gt: Fix CCS id's calculation for CCS mode setting
drm/panel/lg-sw43408: mark sw43408_backlight_ops as static
drm/i915/selftests: Set always_coherent to false when reading from CPU
drm/panel/lg-sw43408: select CONFIG_DRM_DISPLAY_DP_HELPER
drm/i915/guc: avoid FIELD_PREP warning
drm/i915/gt: Disarm breadcrumbs if engines are already idle
Revert "drm/i915: Remove extra multi-gt pm-references"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- sttcs: Fix property spelling
- intel-m10-bmc-hwmon: Fix multiplier for N6000 board power sensor
- ltc2992: Fix memory leak
- dell-smm: Add Dell G15 5511 to fan control whitelist
* tag 'hwmon-for-v6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (shtc1) Fix property misspelling
hwmon: (intel-m10-bmc-hwmon) Fix multiplier for N6000 board power sensor
hwmon: (ltc2992) Fix memory leak in ltc2992_parse_dt()
hwmon: (dell-smm) Add Dell G15 5511 to fan control whitelist
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox fix from Jassi Brar:
- zynqmp-ipi: fix linker error on some configurations
* tag 'mailbox-fixes-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox: zynqmp-ipi: drop irq_to_desc() call
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A series of fixes that came in since the merge window, the main thing
being the fixes Andy did for DMA sync where we were calling into the
DMA API in suprising ways and causing issues as a result, the main
thing being confusing the IOMMU code.
We've also got some fairly important fixes for the stm32 driver, it
supports a wide range of hardware and some optimisations that were
done recently have broken on some systems, and a fix to prevent
glitched signals on the bus in the cadence driver"
* tag 'spi-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: stm32: Don't warn about spurious interrupts
spi: Assign dummy scatterlist to unidirectional transfers
spi: cadence: Ensure data lines set to low during dummy-cycle period
spi: stm32: Revert change that enabled controller before asserting CS
spi: Check if transfer is mapped before calling DMA sync APIs
spi: Don't mark message DMA mapped when no transfer in it is
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One fix that came in since -rc1, fixing misuse of a local variable in
the DT parsing code in the RTQ2208 driver"
* tag 'regulator-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: rtq2208: Fix invalid memory access when devm_of_regulator_put_matches is called
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"The I2C bus was not taking account of the register and any padding
bytes when handling maximum write sizes supported by an I2C adaptor,
this patch from Jim Wylder fixes that"
* tag 'regmap-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap-i2c: Subtract reg size from max_write
|
|
Pull block fixes from Jens Axboe:
- NVMe fixes via Keith:
- Removing unused fields (Kanchan)
- Large folio offsets support (Kundan)
- Multipath NUMA node initialiazation fix (Nilay)
- Multipath IO stats accounting fixes (Keith)
- Circular lockdep fix (Keith)
- Target race condition fix (Sagi)
- Target memory leak fix (Sagi)
- bcache fixes
- null_blk fixes (Damien)
- Fix regression in io.max due to throttle low removal (Waiman)
- DM limit table fixes (Christoph)
- SCSI and block limit fixes (Christoph)
- zone fixes (Damien)
- Misc fixes (Christoph, Hannes, hexue)
* tag 'block-6.10-20240530' of git://git.kernel.dk/linux: (25 commits)
blk-throttle: Fix incorrect display of io.max
block: Fix zone write plugging handling of devices with a runt zone
block: Fix validation of zoned device with a runt zone
null_blk: Do not allow runt zone with zone capacity smaller then zone size
nvmet: fix a possible leak when destroy a ctrl during qp establishment
nvme: use srcu for iterating namespace list
bcache: code cleanup in __bch_bucket_alloc_set()
bcache: call force_wake_up_gc() if necessary in check_should_bypass()
bcache: allow allocator to invalidate bucket in gc
block: check for max_hw_sectors underflow
block: stack max_user_sectors
sd: also set max_user_sectors when setting max_sectors
null_blk: Print correct max open zones limit in null_init_zoned_dev()
block: delete redundant function declaration
null_blk: Fix return value of nullb_device_power_store()
dm: make dm_set_zones_restrictions work on the queue limits
dm: remove dm_check_zoned
dm: move setting zoned_enabled to dm_table_set_restrictions
block: remove blk_queue_max_integrity_segments
nvme: adjust multiples of NVME_CTRL_PAGE_SIZE in offset
...
|
|
Pull io_uring fixes from Jens Axboe:
"A couple of minor fixes for issues introduced in the 6.10 merge window:
- Ensure that all read/write ops have an appropriate cleanup handler
set (Breno)
- Regression for applications still doing multiple mmaps even if
FEAT_SINGLE_MMAP is set (me)
- Move kmsg inquiry setting above any potential failure point,
avoiding a spurious NONEMPTY flag setting on early error (me)"
* tag 'io_uring-6.10-20240530' of git://git.kernel.dk/linux:
io_uring/net: assign kmsg inq/flags before buffer selection
io_uring/rw: Free iovec before cleaning async data
io_uring: don't attempt to mmap larger than what the user asks for
|
|
__kmalloc_node() is considered an "internal" function to the Slab, so
drop it from explicit testing.
Link: https://lore.kernel.org/r/20240531185703.work.588-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- dma-mapping benchmark error handling fixes (Fedor Pchelkin)
- correct a config symbol reference in the DMA API documentation (Lukas
Bulwahn)
* tag 'dma-mapping-6.10-2024-05-31' of git://git.infradead.org/users/hch/dma-mapping:
Documentation/core-api: correct reference to SWIOTLB_DYNAMIC
dma-mapping: benchmark: handle NUMA_NO_NODE correctly
dma-mapping: benchmark: fix node id validation
dma-mapping: benchmark: avoid needless copy_to_user if benchmark fails
dma-mapping: benchmark: fix up kthread-related error handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Lots of small fixes:
- A race fix for debugfs handling in ALSA core
- A series of corrections for MIDI2 core format conversions
- ASoC Intel fixes for 16 bit DMIC config
- Updates for missing module parameters in ASoC code
- HD-audio quirk, Cirrus codec fix, etc minor fixes"
* tag 'sound-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (26 commits)
ALSA: seq: ump: Fix swapped song position pointer data
ASoC: SOF: ipc4-topology: Adjust the params based on DAI formats
ASoC: SOF: ipc4-topology: Improve readability of sof_ipc4_prepare_dai_copier()
ASoC: SOF: ipc4-topology/pcm: Rename sof_ipc4_copier_is_single_format()
ASoC: SOF: ipc4-topology: Print out the channel count in sof_ipc4_dbg_audio_format
ASoC: SOF: ipc4-topology: Add support for NHLT with 16-bit only DMIC blob
ALSA: seq: Fix yet another spot for system message conversion
ALSA: ump: Set default protocol when not given explicitly
ALSA: ump: Don't accept an invalid UMP protocol number
ASoC: SOF: ipc4-topology: Fix input format query of process modules without base extension
ASoC: Intel: sof-sdw: fix missing SPI_MASTER dependency
ALSA: pcm: fix typo in comment
ALSA: ump: Don't clear bank selection after sending a program change
ALSA: seq: Fix incorrect UMP type for system messages
ALSA/hda: intel-dsp-config: reduce log verbosity
ALSA: seq: Don't clear bank selection at event -> UMP MIDI2 conversion
ALSA: seq: Fix missing bank setup between MIDI1/MIDI2 UMP conversion
ASoC: SOF: add missing MODULE_DESCRIPTION()
ASoC: SOF: reorder MODULE_ definitions
ASoC: SOF: AMD: group all module related information
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- a use-after-free bugfix
- Kconfig fixes for randconfig builds
- allow setting touchscreen_dmi quirks from the cmdline for debugging
- touchscreen_dmi quirks for two new laptop/tablet models
* tag 'platform-drivers-x86-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: touchscreen_dmi: Add info for the EZpad 6s Pro
platform/x86: touchscreen_dmi: Add info for GlobalSpace SolT IVW 11.6" tablet
platform/x86: touchscreen_dmi: Add support for setting touchscreen properties from cmdline
platform/x86: thinkpad_acpi: Select INPUT_SPARSEKMAP in Kconfig
platform/x86: x86-android-tablets: Add "select LEDS_CLASS"
platform/x86: ISST: fix use-after-free in tpmi_sst_dev_remove()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to avoid pt_regs aliasing with idle thread stacks on secondary
harts.
- HAVE_ARCH_HUGE_VMAP is enabled on XIP kernels, which fixes boot
issues on XIP systems with huge pages.
- An update to the uABI documentation clarifying that only scalar
misaligned accesses were grandfathered in as supported, as the vector
extension did not exist at the time the uABI was frozen.
- A fix for the recently-added byte/half atomics to avoid losing the
fully ordered decorations.
* tag 'riscv-for-linus-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix fully ordered LR/SC xchg[8|16]() implementations
Documentation: RISC-V: uabi: Only scalar misaligned loads are supported
riscv: enable HAVE_ARCH_HUGE_VMAP for XIP kernel
riscv: prevent pt_regs corruption for secondary idle threads
|
|
Pull bcachefs fixes from Kent Overstreet:
"Assorted odds and ends...
- two downgrade fixes
- a couple snapshot deletion and repair fixes, thanks to noradtux for
finding these and providing the image to debug them
- a couple assert fixes
- convert to folio helper, from Matthew
- some improved error messages
- bit of code reorganization (just moving things around); doing this
while things are quiet so I'm not rebasing fixes past reorgs
- don't return -EROFS on inconsistency error in recovery, this
confuses util-linux and has it retry the mount
- fix failure to return error on misaligned dio write; reported as an
issue with coreutils shred"
* tag 'bcachefs-2024-05-30' of https://evilpiepirate.org/git/bcachefs: (21 commits)
bcachefs: Fix failure to return error on misaligned dio write
bcachefs: Don't return -EROFS from mount on inconsistency error
bcachefs: Fix uninitialized var warning
bcachefs: Split out sb-errors_format.h
bcachefs: Split out journal_seq_blacklist_format.h
bcachefs: Split out replicas_format.h
bcachefs: Split out disk_groups_format.h
bcachefs: split out sb-downgrade_format.h
bcachefs: split out sb-members_format.h
bcachefs: Better fsck error message for key version
bcachefs: btree_gc can now handle unknown btrees
bcachefs: add missing MODULE_DESCRIPTION()
bcachefs: Fix setting of downgrade recovery passes/errors
bcachefs: Run check_key_has_snapshot in snapshot_delete_keys()
bcachefs: Refactor delete_dead_snapshots()
bcachefs: Fix locking assert
bcachefs: Fix lookup_first_inode() when inode_generations are present
bcachefs: Plumb bkey into __btree_err()
bcachefs: Use copy_folio_from_iter_atomic()
bcachefs: Fix sb-downgrade validation
...
|
|
Intel CPUs have a MSR bit to limit CPUID enumeration to leaf two. If
this bit is set by the BIOS then CPUID evaluation including topology
enumeration does not work correctly as the evaluation code does not try
to analyze any leaf greater than two.
This went unnoticed before because the original topology code just
repeated evaluation several times and managed to overwrite the initial
limited information with the correct one later. The new evaluation code
does it once and therefore ends up with the limited and wrong
information.
Cure this by unlocking CPUID right before evaluating anything which
depends on the maximum CPUID leaf being greater than two instead of
rereading stuff after unlock.
Fixes: 22d63660c35e ("x86/cpu: Use common topology code for Intel")
Reported-by: Peter Schneider <pschneider1968@googlemail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/fd3f73dc-a86f-4bcf-9c60-43556a21eb42@googlemail.com
|