Age | Commit message (Collapse) | Author |
|
Record `m_sb` and `m_dif` to replace `m_fscache`, `m_daxdev`, `m_fp`
and `m_dax_part_off` in order to simplify the codebase.
Note that `m_bdev` is still left since it can be assigned from
`sb->s_bdev` directly.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241212235401.2857246-1-hsiangkao@linux.alibaba.com
|
|
Instead of just listing each one directly in `struct erofs_sb_info`
except that we still use `sb->s_bdev` for the primary block device.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241216125310.930933-2-hsiangkao@linux.alibaba.com
|
|
Add condition check to register ACP PDM sound card by reading
_WOV acpi entry.
Fixes: 0386d765f27a ("ASoC: amd: ps: refactor acp device configuration read logic")
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20241213061147.1060451-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Alexandre observed a warning emitted from pci_msi_setup_msi_irqs() on a
RISCV platform which does not provide PCI/MSI support:
WARNING: CPU: 1 PID: 1 at drivers/pci/msi/msi.h:121 pci_msi_setup_msi_irqs+0x2c/0x32
__pci_enable_msix_range+0x30c/0x596
pci_msi_setup_msi_irqs+0x2c/0x32
pci_alloc_irq_vectors_affinity+0xb8/0xe2
RISCV uses hierarchical interrupt domains and correctly does not implement
the legacy fallback. The warning triggers from the legacy fallback stub.
That warning is bogus as the PCI/MSI layer knows whether a PCI/MSI parent
domain is associated with the device or not. There is a check for MSI-X,
which has a legacy assumption. But that legacy fallback assumption is only
valid when legacy support is enabled, but otherwise the check should simply
return -ENOTSUPP.
Loongarch tripped over the same problem and blindly enabled legacy support
without implementing the legacy fallbacks. There are weak implementations
which return an error, so the problem was papered over.
Correct pci_msi_domain_supports() to evaluate the legacy mode and add
the missing supported check into the MSI enable path to complete it.
Fixes: d2a463b29741 ("PCI/MSI: Reject multi-MSI early")
Reported-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/87ed2a8ow5.ffs@tglx
|
|
When USB-C monitor is connected directly to Intel Barlow Ridge host, it
goes into "redrive" mode that basically routes the DisplayPort signals
directly from the GPU to the USB-C monitor without any tunneling needed.
However, the host router must be powered on for this to work. Aaron
reported that there are a couple of cases where this will not work with
the current code:
- Booting with USB-C monitor plugged in.
- Plugging in USB-C monitor when the host router is in sleep state
(runtime suspended).
- Plugging in USB-C device while the system is in system sleep state.
In all these cases once the host router is runtime suspended the picture
on the connected USB-C display disappears too. This is certainly not
what the user expected.
For this reason improve the redrive mode handling to keep the host
router from runtime suspending when detect that any of the above cases
is happening.
Fixes: a75e0684efe5 ("thunderbolt: Keep the domain powered when USB4 port is in redrive mode")
Reported-by: Aaron Rainbolt <arainbolt@kfocus.org>
Closes: https://lore.kernel.org/linux-usb/20241009220118.70bfedd0@kf-ir16/
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
If client send parallel smb2 negotiate request on same connection,
ksmbd_conn can be racy. smb2 negotiate handling that are not
performance-related can be serialized with conn lock.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Since commit 0a77d947f599 ("ksmbd: check outstanding simultaneous SMB
operations"), ksmbd enforces a maximum number of simultaneous operations
for a connection. The problem is that reaching the limit causes ksmbd to
close the socket, and the client has no indication that it should have
slowed down.
This behaviour can be reproduced by setting "smb2 max credits = 128" (or
lower), and transferring a large file (25GB).
smbclient fails as below:
$ smbclient //192.168.1.254/testshare -U user%pass
smb: \> put file.bin
cli_push returned NT_STATUS_USER_SESSION_DELETED
putting file file.bin as \file.bin smb2cli_req_compound_submit:
Insufficient credits. 0 available, 1 needed
NT_STATUS_INTERNAL_ERROR closing remote file \file.bin
smb: \> smb2cli_req_compound_submit: Insufficient credits. 0 available,
1 needed
Windows clients fail with 0x8007003b (with smaller files even).
Fix this by delaying reading from the socket until there's room to
allocate a request. This effectively applies backpressure on the client,
so the transfer completes, albeit at a slower rate.
Fixes: 0a77d947f599 ("ksmbd: check outstanding simultaneous SMB operations")
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This changes the semantics of req_running to count all in-flight
requests on a given connection, rather than the number of elements
in the conn->request list. The latter is used only in smb2_cancel,
and the counter is not used
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When evaluating extended permissions, ignore unknown permissions instead
of calling BUG(). This commit ensures that future permissions can be
added without interfering with older kernels.
Cc: stable@vger.kernel.org
Fixes: fa1aa143ac4a ("selinux: extended permissions for ioctls")
Signed-off-by: Thiébaud Weksteen <tweek@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- Sundry build and misc fixes
* tag 'arc-6.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: build: Try to guess GCC variant of cross compiler
ARC: bpf: Correct conditional check in 'check_jmp_32'
ARC: dts: Replace deprecated snps,nr-gpios property for snps,dw-apb-gpio-port devices
ARC: build: Use __force to suppress per-CPU cmpxchg warnings
ARC: fix reference of dependency for PAE40 config
ARC: build: disallow invalid PAE40 + 4K page config
arc: rename aux.h to arc_aux.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Limit EFI zboot to GZIP and ZSTD before it comes in wider use
- Fix inconsistent error when looking up a non-existent file in
efivarfs with a name that does not adhere to the NAME-GUID format
- Drop some unused code
* tag 'efi-fixes-for-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/esrt: remove esre_attribute::store()
efivarfs: Fix error on non-existent file
efi/zboot: Limit compression options to GZIP and ZSTD
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"i2c host fixes: PNX used the wrong unit for timeouts, Nomadik was
missing a sentinel, and RIIC was missing rounding up"
* tag 'i2c-for-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: riic: Always round-up when calculating bus period
i2c: nomadik: Add missing sentinel to match table
i2c: pnx: Fix timeout in wait functions
|
|
The existing linked list based implementation of how ts tags are
assigned and managed is unsafe against concurrency and corner cases:
- element addition in tx processing can race against element removal
in ts queue completion,
- element removal in ts queue completion can race against element
removal in device close,
- if a large number of frames gets added to tx queue without ts queue
completions in between, elements with duplicate tag values can get
added.
Use a different implementation, based on per-port used tags bitmaps and
saved skb arrays.
Safety for addition in tx processing vs removal in ts completion is
provided by:
tag = find_first_zero_bit(...);
smp_mb();
<write rdev->ts_skb[tag]>
set_bit(...);
vs
<read rdev->ts_skb[tag]>
smp_mb();
clear_bit(...);
Safety for removal in ts completion vs removal in device close is
provided by using atomic read-and-clear for rdev->ts_skb[tag]:
ts_skb = xchg(&rdev->ts_skb[tag], NULL);
if (ts_skb)
<handle it>
Fixes: 33f5d733b589 ("net: renesas: rswitch: Improve TX timestamp accuracy")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Link: https://patch.msgid.link/20241212062558.436455-1-nikita.yoush@cogentembedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The calculation determining whether to use three- or four-level paging
didn't account for KMSAN modules metadata. Include this metadata in the
virtual memory size calculation to ensure correct paging mode selection
and avoiding potentially unnecessary physical memory size limitations.
Fixes: 65ca73f9fb36 ("s390/mm: define KMSAN metadata for vmalloc and modules")
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Shannon Nelson says:
====================
ionic: minor code fixes
These are a couple of code fixes for the ionic driver.
====================
Link: https://patch.msgid.link/20241212213157.12212-1-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some calls into ionic_get_module_eeprom() don't use a single
full buffer size, but instead multiple calls with an offset.
Teach our driver to use the offset correctly so we can
respond appropriately to the caller.
Fixes: 4d03e00a2140 ("ionic: Add initial ethtool support")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241212213157.12212-4-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are some FW error handling paths that can cause us to
try to destroy the workqueue more than once, so let's be sure
we're checking for that.
The case where this popped up was in an AER event where the
handlers got called in such a way that ionic_reset_prepare()
and thus ionic_dev_teardown() got called twice in a row.
The second time through the workqueue was already destroyed,
and destroy_workqueue() choked on the bad wq pointer.
We didn't hit this in AER handler testing before because at
that time we weren't using a private workqueue. Later we
replaced the use of the system workqueue with our own private
workqueue but hadn't rerun the AER handler testing since then.
Fixes: 9e25450da700 ("ionic: add private workqueue per-device")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241212213157.12212-3-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If register_netdev() fails, then the driver leaks the netdev notifier.
Fix this by calling ionic_lif_unregister() on register_netdev()
failure. This will also call ionic_lif_unregister_phc() if it has
already been registered.
Fixes: 30b87ab4c0b3 ("ionic: remove lif list concept")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241212213157.12212-2-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the correct attribute space for sub-message key lookup in nested
attributes when adding attributes. This fixes rt_link where the "kind"
key and "data" sub-message are nested attributes in "linkinfo".
For example:
./tools/net/ynl/cli.py \
--create \
--spec Documentation/netlink/specs/rt_link.yaml \
--do newlink \
--json '{"link": 99,
"linkinfo": { "kind": "vlan", "data": {"id": 4 } }
}'
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Fixes: ab463c4342d1 ("tools/net/ynl: Add support for encoding sub-messages")
Link: https://patch.msgid.link/20241213130711.40267-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If either a zero count or a large one is provided, kernel can crash.
Fixes: 82c93a87bf8b ("netdevsim: implement couple of testing devlink health reporters")
Reported-by: syzbot+ea40e4294e58b0292f74@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/675c6862.050a0220.37aaf.00b1.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241213172518.2415666-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Packets injected by the CPU should have a SRC_PORT field equal to the
CPU port module index in the Analyzer block (ocelot->num_phys_ports).
The blamed commit copied the ocelot_ifh_set_basic() call incorrectly
from ocelot_xmit_common() in net/dsa/tag_ocelot.c. Instead of calling
with "x", it calls with BIT_ULL(x), but the field is not a port mask,
but rather a single port index.
[ side note: this is the technical debt of code duplication :( ]
The error used to be silent and doesn't appear to have other
user-visible manifestations, but with new changes in the packing
library, it now fails loudly as follows:
------------[ cut here ]------------
Cannot store 0x40 inside bits 46-43 - will truncate
sja1105 spi2.0: xmit timed out
WARNING: CPU: 1 PID: 102 at lib/packing.c:98 __pack+0x90/0x198
sja1105 spi2.0: timed out polling for tstamp
CPU: 1 UID: 0 PID: 102 Comm: felix_xmit
Tainted: G W N 6.13.0-rc1-00372-gf706b85d972d-dirty #2605
Call trace:
__pack+0x90/0x198 (P)
__pack+0x90/0x198 (L)
packing+0x78/0x98
ocelot_ifh_set_basic+0x260/0x368
ocelot_port_inject_frame+0xa8/0x250
felix_port_deferred_xmit+0x14c/0x258
kthread_worker_fn+0x134/0x350
kthread+0x114/0x138
The code path pertains to the ocelot switchdev driver and to the felix
secondary DSA tag protocol, ocelot-8021q. Here seen with ocelot-8021q.
The messenger (packing) is not really to blame, so fix the original
commit instead.
Fixes: e1b9e80236c5 ("net: mscc: ocelot: fix QoS class for injected packets with "ocelot-8021q"")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241212165546.879567-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
- Make sure amd64_edac loads successfully on certain Zen4 memory
configurations
* tag 'edac_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Simplify ECC check on unified memory controllers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Disable the secure programming interface of the GIC500 chip in the
RK3399 SoC to fix interrupt priority assignment and even make a dead
machine boot again when the gic-v3 driver enables pseudo NMIs
- Correct the declaration of a percpu variable to fix several sparse
warnings
* tag 'irq_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3: Work around insecure GIC integrations
irqchip/gic: Correct declaration of *percpu_base pointer in union gic_base
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Prevent incorrect dequeueing of the deadline dlserver helper task and
fix its time accounting
- Properly track the CFS runqueue runnable stats
- Check the total number of all queued tasks in a sched fair's runqueue
hierarchy before deciding to stop the tick
- Fix the scheduling of the task that got woken last (NEXT_BUDDY) by
preventing those from being delayed
* tag 'sched_urgent_for_v6.13_rc3-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/dlserver: Fix dlserver time accounting
sched/dlserver: Fix dlserver double enqueue
sched/eevdf: More PELT vs DELAYED_DEQUEUE
sched/fair: Fix sched_can_stop_tick() for fair tasks
sched/fair: Fix NEXT_BUDDY
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix confusion with implicitly-shifted MDCR_EL2 masks breaking
SPE/TRBE initialization
- Align nested page table walker with the intended memory attribute
combining rules of the architecture
- Prevent userspace from constraining the advertised ASID width,
avoiding horrors of guest TLBIs not matching the intended context
in hardware
- Don't leak references on LPIs when insertion into the translation
cache fails
RISC-V:
- Replace csr_write() with csr_set() for HVIEN PMU overflow bit
x86:
- Cache CPUID.0xD XSTATE offsets+sizes during module init
On Intel's Emerald Rapids CPUID costs hundreds of cycles and there
are a lot of leaves under 0xD. Getting rid of the CPUIDs during
nested VM-Enter and VM-Exit is planned for the next release, for
now just cache them: even on Skylake that is 40% faster"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Cache CPUID.0xD XSTATE offsets+sizes during module init
RISC-V: KVM: Fix csr_write -> csr_set for HVIEN PMU overflow bit
KVM: arm64: vgic-its: Add error handling in vgic_its_cache_translation
KVM: arm64: Do not allow ID_AA64MMFR0_EL1.ASIDbits to be overridden
KVM: arm64: Fix S1/S2 combination when FWB==1 and S2 has Device memory type
arm64: Fix usage of new shifted MDCR_EL2 values
|
|
Guangguan Wang says:
====================
net: several fixes for smc
v1 -> v2:
rewrite patch #2 suggested by Paolo.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When receiving clc msg, the field length in smc_clc_msg_hdr indicates the
length of msg should be received from network and the value should not be
fully trusted as it is from the network. Once the value of length exceeds
the value of buflen in function smc_clc_wait_msg it may run into deadloop
when trying to drain the remaining data exceeding buflen.
This patch checks the return value of sock_recvmsg when draining data in
case of deadloop in draining.
Fixes: fb4f79264c0f ("net/smc: tolerate future SMCD versions")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When receiving proposal msg in server, the field smcd_v2_ext_offset in
proposal msg is from the remote client and can not be fully trusted.
Once the value of smcd_v2_ext_offset exceed the max value, there has
the chance to access wrong address, and crash may happen.
This patch checks the value of smcd_v2_ext_offset before using it.
Fixes: 5c21c4ccafe8 ("net/smc: determine accepted ISM devices")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When receiving proposal msg in server, the fields v2_ext_offset/
eid_cnt/ism_gid_cnt in proposal msg are from the remote client
and can not be fully trusted. Especially the field v2_ext_offset,
once exceed the max value, there has the chance to access wrong
address, and crash may happen.
This patch checks the fields v2_ext_offset/eid_cnt/ism_gid_cnt
before using them.
Fixes: 8c3dca341aea ("net/smc: build and send V2 CLC proposal")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When receiving proposal msg in server, the field iparea_offset
and the field ipv6_prefixes_cnt in proposal msg are from the
remote client and can not be fully trusted. Especially the
field iparea_offset, once exceed the max value, there has the
chance to access wrong address, and crash may happen.
This patch checks iparea_offset and ipv6_prefixes_cnt before using them.
Fixes: e7b7a64a8493 ("smc: support variable CLC proposal messages")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When application sending data more than sndbuf_space, there have chances
application will sleep in epoll_wait, and will never be wakeup again. This
is caused by a race between smc_poll and smc_cdc_tx_handler.
application tasklet
smc_tx_sendmsg(len > sndbuf_space) |
epoll_wait for EPOLL_OUT,timeout=0 |
smc_poll |
if (!smc->conn.sndbuf_space) |
| smc_cdc_tx_handler
| atomic_add sndbuf_space
| smc_tx_sndbuf_nonfull
| if (!test_bit SOCK_NOSPACE)
| do not sk_write_space;
set_bit SOCK_NOSPACE; |
return mask=0; |
Application will sleep in epoll_wait as smc_poll returns 0. And
smc_cdc_tx_handler will not call sk_write_space because the SOCK_NOSPACE
has not be set. If there is no inflight cdc msg, sk_write_space will not be
called any more, and application will sleep in epoll_wait forever.
So check sndbuf_space again after NOSPACE flag is set to break the race.
Fixes: 8dce2786a290 ("net/smc: smc_poll improvements")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
link down work may be scheduled before lgr freed but execute
after lgr freed, which may result in crash. So it is need to
hold a reference before shedule link down work, and put the
reference after work executed or canceled.
The relevant crash call stack as follows:
list_del corruption. prev->next should be ffffb638c9c0fe20,
but was 0000000000000000
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:51!
invalid opcode: 0000 [#1] SMP NOPTI
CPU: 6 PID: 978112 Comm: kworker/6:119 Kdump: loaded Tainted: G #1
Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 2221b89 04/01/2014
Workqueue: events smc_link_down_work [smc]
RIP: 0010:__list_del_entry_valid.cold+0x31/0x47
RSP: 0018:ffffb638c9c0fdd8 EFLAGS: 00010086
RAX: 0000000000000054 RBX: ffff942fb75e5128 RCX: 0000000000000000
RDX: ffff943520930aa0 RSI: ffff94352091fc80 RDI: ffff94352091fc80
RBP: 0000000000000000 R08: 0000000000000000 R09: ffffb638c9c0fc38
R10: ffffb638c9c0fc30 R11: ffffffffa015eb28 R12: 0000000000000002
R13: ffffb638c9c0fe20 R14: 0000000000000001 R15: ffff942f9cd051c0
FS: 0000000000000000(0000) GS:ffff943520900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f4f25214000 CR3: 000000025fbae004 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
rwsem_down_write_slowpath+0x17e/0x470
smc_link_down_work+0x3c/0x60 [smc]
process_one_work+0x1ac/0x350
worker_thread+0x49/0x2f0
? rescuer_thread+0x360/0x360
kthread+0x118/0x140
? __kthread_bind_mask+0x60/0x60
ret_from_fork+0x1f/0x30
Fixes: 541afa10c126 ("net/smc: add smcr_port_err() and smcr_link_down() processing")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"Single one-line fix in the ufs driver"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Update compl_time_stamp_local_clock after completing a cqe
|
|
Pull bpf fixes from Daniel Borkmann:
- Fix a bug in the BPF verifier to track changes to packet data
property for global functions (Eduard Zingerman)
- Fix a theoretical BPF prog_array use-after-free in RCU handling of
__uprobe_perf_func (Jann Horn)
- Fix BPF tracing to have an explicit list of tracepoints and their
arguments which need to be annotated as PTR_MAYBE_NULL (Kumar
Kartikeya Dwivedi)
- Fix a logic bug in the bpf_remove_insns code where a potential error
would have been wrongly propagated (Anton Protopopov)
- Avoid deadlock scenarios caused by nested kprobe and fentry BPF
programs (Priya Bala Govindasamy)
- Fix a bug in BPF verifier which was missing a size check for
BTF-based context access (Kumar Kartikeya Dwivedi)
- Fix a crash found by syzbot through an invalid BPF prog_array access
in perf_event_detach_bpf_prog (Jiri Olsa)
- Fix several BPF sockmap bugs including a race causing a refcount
imbalance upon element replace (Michal Luczaj)
- Fix a use-after-free from mismatching BPF program/attachment RCU
flavors (Jann Horn)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (23 commits)
bpf: Avoid deadlock caused by nested kprobe and fentry bpf programs
selftests/bpf: Add tests for raw_tp NULL args
bpf: Augment raw_tp arguments with PTR_MAYBE_NULL
bpf: Revert "bpf: Mark raw_tp arguments with PTR_MAYBE_NULL"
selftests/bpf: Add test for narrow ctx load for pointer args
bpf: Check size for BTF-based ctx access of pointer members
selftests/bpf: extend changes_pkt_data with cases w/o subprograms
bpf: fix null dereference when computing changes_pkt_data of prog w/o subprogs
bpf: Fix theoretical prog_array UAF in __uprobe_perf_func()
bpf: fix potential error return
selftests/bpf: validate that tail call invalidates packet pointers
bpf: consider that tail calls invalidate packet pointers
selftests/bpf: freplace tests for tracking of changes_packet_data
bpf: check changes_pkt_data property for extension programs
selftests/bpf: test for changing packet data from global functions
bpf: track changes_pkt_data property for global functions
bpf: refactor bpf_helper_changes_pkt_data to use helper number
bpf: add find_containing_subprog() utility function
bpf,perf: Fix invalid prog_array access in perf_event_detach_bpf_prog
bpf: Fix UAF via mismatching bpf_prog/attachment RCU flavors
...
|
|
BPF program types like kprobe and fentry can cause deadlocks in certain
situations. If a function takes a lock and one of these bpf programs is
hooked to some point in the function's critical section, and if the
bpf program tries to call the same function and take the same lock it will
lead to deadlock. These situations have been reported in the following
bug reports.
In percpu_freelist -
Link: https://lore.kernel.org/bpf/CAADnVQLAHwsa+2C6j9+UC6ScrDaN9Fjqv1WjB1pP9AzJLhKuLQ@mail.gmail.com/T/
Link: https://lore.kernel.org/bpf/CAPPBnEYm+9zduStsZaDnq93q1jPLqO-PiKX9jy0MuL8LCXmCrQ@mail.gmail.com/T/
In bpf_lru_list -
Link: https://lore.kernel.org/bpf/CAPPBnEajj+DMfiR_WRWU5=6A7KKULdB5Rob_NJopFLWF+i9gCA@mail.gmail.com/T/
Link: https://lore.kernel.org/bpf/CAPPBnEZQDVN6VqnQXvVqGoB+ukOtHGZ9b9U0OLJJYvRoSsMY_g@mail.gmail.com/T/
Link: https://lore.kernel.org/bpf/CAPPBnEaCB1rFAYU7Wf8UxqcqOWKmRPU1Nuzk3_oLk6qXR7LBOA@mail.gmail.com/T/
Similar bugs have been reported by syzbot.
In queue_stack_maps -
Link: https://lore.kernel.org/lkml/0000000000004c3fc90615f37756@google.com/
Link: https://lore.kernel.org/all/20240418230932.2689-1-hdanton@sina.com/T/
In lpm_trie -
Link: https://lore.kernel.org/linux-kernel/00000000000035168a061a47fa38@google.com/T/
In ringbuf -
Link: https://lore.kernel.org/bpf/20240313121345.2292-1-hdanton@sina.com/T/
Prevent kprobe and fentry bpf programs from attaching to these critical
sections by removing CC_FLAGS_FTRACE for percpu_freelist.o,
bpf_lru_list.o, queue_stack_maps.o, lpm_trie.o, ringbuf.o files.
The bugs reported by syzbot are due to tracepoint bpf programs being
called in the critical sections. This patch does not aim to fix deadlocks
caused by tracepoint programs. However, it does prevent deadlocks from
occurring in similar situations due to kprobe and fentry programs.
Signed-off-by: Priya Bala Govindasamy <pgovind2@uci.edu>
Link: https://lore.kernel.org/r/CAPPBnEZpjGnsuA26Mf9kYibSaGLm=oF6=12L21X1GEQdqjLnzQ@mail.gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes for some reported issues.
Included in here are:
- typec driver bugfixes
- u_serial gadget driver bugfix for much reported and discussed issue
- dwc2 bugfixes
- midi gadget driver bugfix
- ehci-hcd driver bugfix
- other small bugfixes
All of these have been in linux-next for over a week with no reported
issues"
* tag 'usb-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Fix connector status writing past buffer size
usb: typec: ucsi: Fix completion notifications
usb: dwc2: Fix HCD port connection race
usb: dwc2: hcd: Fix GetPortStatus & SetPortFeature
usb: dwc2: Fix HCD resume
usb: gadget: u_serial: Fix the issue that gs_start_io crashed due to accessing null pointer
usb: misc: onboard_usb_dev: skip suspend/resume sequence for USB5744 SMBus support
usb: dwc3: xilinx: make sure pipe clock is deselected in usb2 only mode
usb: core: hcd: only check primary hcd skip_phy_initialization
usb: gadget: midi2: Fix interpretation of is_midi1 bits
usb: dwc3: imx8mp: fix software node kernel dump
usb: typec: anx7411: fix OF node reference leaks in anx7411_typec_switch_probe()
usb: typec: anx7411: fix fwnode_handle reference leak
usb: host: max3421-hcd: Correctly abort a USB request.
dt-bindings: phy: imx8mq-usb: correct reference to usb-switch.yaml
usb: ehci-hcd: fix call balance of clocks handling routines
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are two small serial driver fixes for 6.13-rc3. They are:
- ioport build fallout fix for the 8250 port driver that should
resolve Guenter's runtime problems
- sh-sci driver bugfix for a reported problem
Both of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: serial: Work around warning backtrace in serial8250_set_defaults
serial: sh-sci: Check if TX data was written to device in .tx_empty()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging gpib driver build and bugfixes for issues
that have been much-reported (should finally fix Guenter's build
issues). There are more of these coming in later -rc releases, but for
now this should fix the majority of the reported problems.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: gpib: Fix i386 build issue
staging: gpib: Fix faulty workaround for assignment in if
staging: gpib: Workaround for ppc build failure
staging: gpib: Make GPIB_NI_PCI_ISA depend on HAS_IOPORT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"Fix a regression in rsassa-pkcs1 as well as a buffer overrun in
hisilicon/debugfs"
* tag 'v6.13-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: hisilicon/debugfs - fix the struct pointer incorrectly offset problem
crypto: rsassa-pkcs1 - Copy source data for SG list
|
|
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Set bindgen's Rust target version to prevent issues when
pairing older rustc releases with newer bindgen releases,
such as bindgen >= 0.71.0 and rustc < 1.82 due to
unsafe_extern_blocks.
drm/panic:
- Remove spurious empty line detected by a new Clippy warning"
* tag 'rust-fixes-6.13' of https://github.com/Rust-for-Linux/linux:
rust: kbuild: set `bindgen`'s Rust target version
drm/panic: remove spurious empty line to clean warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Per-domain device-list locking fixes for the AMD IOMMU driver
- Fix incorrect use of smp_processor_id() in the NVidia-specific part
of the ARM-SMMU-v3 driver
- Intel IOMMU driver fixes:
- Remove cache tags before disabling ATS
- Avoid draining PRQ in sva mm release path
- Fix qi_batch NULL pointer with nested parent domain
* tag 'iommu-fixes-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/vt-d: Avoid draining PRQ in sva mm release path
iommu/vt-d: Fix qi_batch NULL pointer with nested parent domain
iommu/vt-d: Remove cache tags before disabling ATS
iommu/amd: Add lockdep asserts for domain->dev_list
iommu/amd: Put list_add/del(dev_data) back under the domain->lock
iommu/tegra241-cmdqv: do not use smp_processor_id in preemptible context
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Damien Le Moal:
- Fix an OF node reference leak in the sata_highbank driver
* tag 'ata-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: sata_highbank: fix OF node reference leak in highbank_initialize_phys()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host-fixes for v6.13-rc3
- Replaced jiffies with msec for timeout calculations.
- Added a sentinel to the 'of_device_id' array in Nomadik.
- Rounded up bus period calculation in RIIC.
|
|
syzbot reported the following crash [1]
Issue came with the blamed commit. Instead of going through
all the iov components, we keep using the first one
and end up with a malformed skb.
[1]
kernel BUG at net/core/skbuff.c:2849 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 UID: 0 PID: 6230 Comm: syz-executor132 Not tainted 6.13.0-rc1-syzkaller-00407-g96b6fcc0ee41 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024
RIP: 0010:__pskb_pull_tail+0x1568/0x1570 net/core/skbuff.c:2848
Code: 38 c1 0f 8c 32 f1 ff ff 4c 89 f7 e8 92 96 74 f8 e9 25 f1 ff ff e8 e8 ae 09 f8 48 8b 5c 24 08 e9 eb fb ff ff e8 d9 ae 09 f8 90 <0f> 0b 66 0f 1f 44 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffc90004cbef30 EFLAGS: 00010293
RAX: ffffffff8995c347 RBX: 00000000fffffff2 RCX: ffff88802cf45a00
RDX: 0000000000000000 RSI: 00000000fffffff2 RDI: 0000000000000000
RBP: ffff88807df0c06a R08: ffffffff8995b084 R09: 1ffff1100fbe185c
R10: dffffc0000000000 R11: ffffed100fbe185d R12: ffff888076e85d50
R13: ffff888076e85c80 R14: ffff888076e85cf4 R15: ffff888076e85c80
FS: 00007f0dca6ea6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0dca6ead58 CR3: 00000000119da000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
skb_cow_data+0x2da/0xcb0 net/core/skbuff.c:5284
tipc_aead_decrypt net/tipc/crypto.c:894 [inline]
tipc_crypto_rcv+0x402/0x24e0 net/tipc/crypto.c:1844
tipc_rcv+0x57e/0x12a0 net/tipc/node.c:2109
tipc_l2_rcv_msg+0x2bd/0x450 net/tipc/bearer.c:668
__netif_receive_skb_list_ptype net/core/dev.c:5720 [inline]
__netif_receive_skb_list_core+0x8b7/0x980 net/core/dev.c:5762
__netif_receive_skb_list net/core/dev.c:5814 [inline]
netif_receive_skb_list_internal+0xa51/0xe30 net/core/dev.c:5905
gro_normal_list include/net/gro.h:515 [inline]
napi_complete_done+0x2b5/0x870 net/core/dev.c:6256
napi_complete include/linux/netdevice.h:567 [inline]
tun_get_user+0x2ea0/0x4890 drivers/net/tun.c:1982
tun_chr_write_iter+0x10d/0x1f0 drivers/net/tun.c:2057
do_iter_readv_writev+0x600/0x880
vfs_writev+0x376/0xba0 fs/read_write.c:1050
do_writev+0x1b6/0x360 fs/read_write.c:1096
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: de4f5fed3f23 ("iov_iter: add iter_iovec() helper")
Reported-by: syzbot+4f66250f6663c0c1d67e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/675b61aa.050a0220.599f4.00bb.GAE@google.com/T/#u
Cc: stable@vger.kernel.org
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20241212222247.724674-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull smb client fixes from Steve French:
- fix rmmod leak
- two minor cleanups
- fix for unlink/rename with pending i/o
* tag '6.13-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: destroy cfid_put_wq on module exit
cifs: Use str_yes_no() helper in cifs_ses_add_channel()
cifs: Fix rmdir failure due to ongoing I/O on deleted file
smb3: fix compiler warning in reparse code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few fairly small fixes for v6.13, the most substatial one being
disabling STIG mode for Cadence QSPI controllers on Altera SoCFPGA
platforms since it doesn't work"
* tag 'spi-fix-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-cadence-qspi: Disable STIG mode for Altera SoCFPGA.
spi: rockchip: Fix PM runtime count on no-op cs
spi: aspeed: Fix an error handling path in aspeed_spi_[read|write]_user()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of additional changes, one ensuring we give AXP717 enough
time to stabilise after changing voltages which fixes serious
stability issues on some platforms and another documenting the DT
support required for the Qualcomm WCN6750"
* tag 'regulator-fix-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: axp20x: AXP717: set ramp_delay
regulator: dt-bindings: qcom,qca6390-pmu: document wcn6750-pmu
|
|
Pull drm fixes from Dave Airlie:
"This is the weekly fixes pull for drm. Just has i915, xe and amdgpu
changes in it. Nothing too major in here:
i915:
- Don't use indexed register writes needlessly [dsb]
- Stop using non-posted DSB writes for legacy LUT [color]
- Fix NULL pointer dereference in capture_engine
- Fix memory leak by correcting cache object name in error handler
xe:
- Fix a KUNIT test error message (Mirsad Todorovac)
- Fix an invalidation fence PM ref leak (Daniele)
- Fix a register pool UAF (Lucas)
amdgpu:
- ISP hw init fix
- SR-IOV fixes
- Fix contiguous VRAM mapping for UVD on older GPUs
- Fix some regressions due to drm scheduler changes
- Workload profile fixes
- Cleaner shader fix
amdkfd:
- Fix DMA map direction for migration
- Fix a potential null pointer dereference
- Cacheline size fixes
- Runtime PM fix"
* tag 'drm-fixes-2024-12-14' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/reg_sr: Remove register pool
drm/xe: Call invalidation_fence_fini for PT inval fences in error state
drm/xe: fix the ERR_PTR() returned on failure to allocate tiny pt
drm/amdkfd: pause autosuspend when creating pdd
drm/amdgpu: fix when the cleaner shader is emitted
drm/amdgpu: Fix ISP HW init issue
drm/amdkfd: hard-code MALL cacheline size for gfx11, gfx12
drm/amdkfd: hard-code cacheline size for gfx11
drm/amdkfd: Dereference null return value
drm/i915: Fix memory leak by correcting cache object name in error handler
drm/i915: Fix NULL pointer dereference in capture_engine
drm/i915/color: Stop using non-posted DSB writes for legacy LUT
drm/i915/dsb: Don't use indexed register writes needlessly
drm/amdkfd: Correct the migration DMA map direction
drm/amd/pm: Set SMU v13.0.7 default workload type
drm/amd/pm: Initialize power profile mode
amdgpu/uvd: get ring reference from rq scheduler
drm/amdgpu: fix UVD contiguous CS mapping problem
drm/amdgpu: use sjt mec fw on gfx943 for sriov
Revert "drm/amdgpu: Fix ISP hw init issue"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management documentation fix from Rafael Wysocki:
"Fix a runtime PM documentation mistake that may mislead someone into
making a coding mistake (Paul Barker)"
* tag 'pm-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Documentation: PM: Clarify pm_runtime_resume_and_get() return value
|