| Age | Commit message (Collapse) | Author |
|---|
|
Commit bfe301ebbc94 ("net: mvpp2: convert to use
mac_prepare()/mac_finish()") introduced a bug wherein it leaves the MAC
RESET register asserted after mac_finish(), due to wrong order of
function calls.
Before it was:
.mac_config()
mvpp22_mode_reconfigure()
assert reset
mvpp2_xlg_config()
deassert reset
Now it is:
.mac_prepare()
.mac_config()
mvpp2_xlg_config()
deassert reset
.mac_finish()
mvpp2_xlg_config()
assert reset
Obviously this is wrong.
This bug is triggered when phylink tries to change the PHY interface
mode from a GMAC mode (sgmii, 1000base-x, 2500base-x) to XLG mode
(10gbase-r, xaui). The XLG mode does not work since reset is left
asserted. Only after
ifconfig down && ifconfig up
is called will the XLG mode work.
Move the call to mvpp22_mode_reconfigure() to .mac_prepare()
implementation. Since some of the subsequent functions need to know
whether the interface is being changed, we unfortunately also need to
pass around the new interface mode before setting port->phy_interface.
Fixes: bfe301ebbc94 ("net: mvpp2: convert to use mac_prepare()/mac_finish()")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is spurious to allocate a bitmap without initializing it.
So, better safe than sorry, initialize it to 0 at least to have some known
values.
While at it, switch to the devm_bitmap_ API which is less verbose.
Fixes: 4b41d3436796 ("net: ethernet: ti: cpsw: allow untagged traffic on host port")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit fe28c53ed71d ("net: stmmac: fix taprio configuration when
base_time is in the past") allowed some base time values in the past,
but apparently not all, the base-time value of 0 (Jan 1st 1970) is still
explicitly denied by the driver.
Remove the bogus check.
Fixes: b60189e0392f ("net: stmmac: Integrate EST with TAPRIO scheduler API")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It looks like test_vxlan_under_vrf.sh is always failing to verify the
connectivity test during the ping between the two simulated VMs.
This is due to the fact that veth-hv in each VM should have a distinct
MAC address.
Fix by setting a unique MAC address on each simulated VM interface.
Without this fix:
$ sudo ./tools/testing/selftests/net/test_vxlan_under_vrf.sh
Checking HV connectivity [ OK ]
Check VM connectivity through VXLAN (underlay in the default VRF) [FAIL]
With this fix applied:
$ sudo ./tools/testing/selftests/net/test_vxlan_under_vrf.sh
Checking HV connectivity [ OK ]
Check VM connectivity through VXLAN (underlay in the default VRF) [ OK ]
Check VM connectivity through VXLAN (underlay in a VRF) [FAIL]
NOTE: the connectivity test with the underlay VRF is still failing; it
seems that ARP requests are blocked at the simulated hypervisor level,
probably due to some missing ARP forwarding rules. This requires more
investigation (in the meantime we may consider to set that test as
expected failure - XFAIL).
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Guangbin Huang says:
====================
net: hns3: add some fixes for -net
This series adds some fixes for the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, driver only allow configuring ETS bandwidth of TCs according
to the max TC number queried from firmware. However, the hardware actually
supports 8 TCs and users may need to configure ETS bandwidth of all TCs,
so remove the restriction.
Fixes: 330baff5423b ("net: hns3: add ETS TC weight setting in SSU module")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If users set unicast mac address for VFs by PF, they need to guarantee all
VFs' address is different. This patch removes the check mac address exist
of VFs, for usrs can refresh mac addresses of all VFs directly without
need to modify the exist mac address to other value firstly.
Fixes: 8e6de441b8e6 ("net: hns3: add support for configuring VF MAC from the host")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When driver queries the register number of mac statistics from firmware,
the old firmware runs in device version V2 only returns number of valid
registers, not include number of three reserved registers among of them.
It cause driver doesn't record the last three data when query mac
statistics.
To fix this problem, driver never query register number in device version
V2 and set it to a fixed value which include three reserved registers.
Fixes: c8af2887c941 ("net: hns3: add support pause/pfc durations for mac statistics")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When fully configure VLANs for a VF, then unload the VF while
triggering a reset to PF, will cause a kernel crash because the
irq is already uninit.
[ 293.177579] ------------[ cut here ]------------
[ 293.183502] kernel BUG at drivers/pci/msi.c:352!
[ 293.189547] Internal error: Oops - BUG: 0 [#1] SMP
......
[ 293.390124] Workqueue: hclgevf hclgevf_service_task [hclgevf]
[ 293.402627] pstate: 80c00009 (Nzcv daif +PAN +UAO)
[ 293.414324] pc : free_msi_irqs+0x19c/0x1b8
[ 293.425429] lr : free_msi_irqs+0x18c/0x1b8
[ 293.436545] sp : ffff00002716fbb0
[ 293.446950] x29: ffff00002716fbb0 x28: 0000000000000000
[ 293.459519] x27: 0000000000000000 x26: ffff45b91ea16b00
[ 293.472183] x25: 0000000000000000 x24: ffffa587b08f4700
[ 293.484717] x23: ffffc591ac30e000 x22: ffffa587b08f8428
[ 293.497190] x21: ffffc591ac30e300 x20: 0000000000000000
[ 293.509594] x19: ffffa58a062a8300 x18: 0000000000000000
[ 293.521949] x17: 0000000000000000 x16: ffff45b91dcc3f48
[ 293.534013] x15: 0000000000000000 x14: 0000000000000000
[ 293.545883] x13: 0000000000000040 x12: 0000000000000228
[ 293.557508] x11: 0000000000000020 x10: 0000000000000040
[ 293.568889] x9 : ffff45b91ea1e190 x8 : ffffc591802d0000
[ 293.580123] x7 : ffffc591802d0148 x6 : 0000000000000120
[ 293.591190] x5 : ffffc591802d0000 x4 : 0000000000000000
[ 293.602015] x3 : 0000000000000000 x2 : 0000000000000000
[ 293.612624] x1 : 00000000000004a4 x0 : ffffa58a1e0c6b80
[ 293.623028] Call trace:
[ 293.630340] free_msi_irqs+0x19c/0x1b8
[ 293.638849] pci_disable_msix+0x118/0x140
[ 293.647452] pci_free_irq_vectors+0x20/0x38
[ 293.656081] hclgevf_uninit_msi+0x44/0x58 [hclgevf]
[ 293.665309] hclgevf_reset_rebuild+0x1ac/0x2e0 [hclgevf]
[ 293.674866] hclgevf_reset+0x358/0x400 [hclgevf]
[ 293.683545] hclgevf_reset_service_task+0xd0/0x1b0 [hclgevf]
[ 293.693325] hclgevf_service_task+0x4c/0x2e8 [hclgevf]
[ 293.702307] process_one_work+0x1b0/0x448
[ 293.710034] worker_thread+0x54/0x468
[ 293.717331] kthread+0x134/0x138
[ 293.724114] ret_from_fork+0x10/0x18
[ 293.731324] Code: f940b000 b4ffff00 a903e7b8 f90017b6 (d4210000)
This patch fixes the problem by waiting for the VF reset done
while unloading the VF.
Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the driver processes rx packets, the head pointer is updated only
after the number of received packets reaches 16. However, hardware
relies on the head pointer to calculate the number of FBDs. As a result,
the hardware calculates the FBD incorrectly. Therefore, the driver
proactively updates the head pointer in each common poll to ensure that
the number of FBDs calculated by the hardware is correct.
Fixes: 68752b24f51a ("net: hns3: schedule the polling again when allocation fails")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, driver will send command to firmware to query pfc packet number
when user uses dcb tool to get pfc parameters. However, the periodic
service task will also periodically query and record MAC statistics,
including pfc packet number.
As the hardware registers of statistics is cleared after reading, it will
cause pfc packet number of MAC statistics are not correct after using dcb
tool to get pfc parameters.
To fix this problem, when user uses dcb tool to get pfc parameters, driver
updates MAC statistics firstly and then get pfc packet number from MAC
statistics.
Fixes: 64fd2300fcc1 ("net: hns3: add support for querying pfc puase packets statistic")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, NIC init ROCE interrupt vector with MSIX interrupt. But ROCE use
pci_irq_vector() to get interrupt vector, which adds the relative interrupt
vector again and gets wrong interrupt vector.
So fixes it by assign relative interrupt vector to ROCE instead of MSIX
interrupt vector and delete the unused struct member base_msi_vector
declaration of hclgevf_dev.
Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
mac table is full
Currently, when driver is failed to add a new multicast mac address to
hardware due to the multicast mac table is full, it will directly return.
In this case, if the multicast mac list has some reuse addresses after the
new address, those reuse addresses will never be added to hardware.
To fix this problem, if function hclge_add_mc_addr_common() returns
-ENOSPC, hclge_sync_vport_mac_list() should judge whether continue or
stop to add next address.
As function hclge_sync_vport_mac_list() needs parameter mac_type to know
whether is uc or mc, refine this function to add parameter mac_type and
remove parameter sync. So does function hclge_unsync_vport_mac_list().
Fixes: ee4bcd3b7ae4 ("net: hns3: refactor the MAC address configure")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Merge int340x thermal driver fix for 5.16-rc1.
* thermal-int340x:
thermal/drivers/int340x: processor_thermal: Suppot 64 bit RFIM responses
|
|
Merge operating performance points (OPP) framework updates for and
intel_pstate driver fixes for 5.16-rc1.
* pm-opp:
dt-bindings: opp: Allow multi-worded OPP entry name
opp: Fix return in _opp_add_static_v2()
PM / devfreq: tegra30: Check whether clk_round_rate() returns zero rate
PM / devfreq: tegra30: Use resource-managed helpers
PM / devfreq: Add devm_devfreq_add_governor()
opp: Add more resource-managed variants of dev_pm_opp_of_add_table()
opp: Change type of dev_pm_opp_attach_genpd(names) argument
opp: Fix required-opps phandle array count check
* pm-cpufreq:
cpufreq: intel_pstate: Clear HWP Status during HWP Interrupt enable
cpufreq: intel_pstate: Fix unchecked MSR 0x773 access
cpufreq: intel_pstate: Clear HWP desired on suspend/shutdown and offline
|
|
Merge assorted fixes and cleanups and one new backlight quirk list
item for 5.16-rc1.
* acpica:
ACPI: Drop ACPI_USE_BUILTIN_STDARG ifdef from acgcc.h
* acpi-ec:
ACPI: EC: Remove initialization of static variables to false
ACPI: EC: Use ec_no_wakeup on HP ZHAN 66 Pro
* acpi-pmic:
ACPI: PMIC: Fix intel_pmic_regs_handler() read accesses
* acpi-video:
ACPI: video: use platform backlight driver on Xiaomi Mi Pad 2
ACPI: video: Drop dmi_system_id.ident settings from video_detect_dmi_table[]
|
|
Merge new ACPI device configuration object _DSC support for 5.16-rc1.
* acpi-dsc:
Documentation: ACPI: Fix non-D0 probe _DSC object example
at24: Support probing while in non-zero ACPI D state
media: i2c: imx319: Support device probe in non-zero ACPI D state
ACPI: Add a convenience function to tell a device is in D0 state
Documentation: ACPI: Document _DSC object usage for enum power state
i2c: Allow an ACPI driver to manage the device's power state during probe
ACPI: scan: Obtain device's desired enumeration power state
|
|
The original patch adding the example used _DSC Name when Method was
intended. Fix this.
Also replace spaces used for indentation with tabs in the example.
Fixes: ed66f12ba4b1 ("Documentation: ACPI: Document _DSC object usage for enum power state")
Reported-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There is a spelling mistake in a dev_info message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/20211108201817.43121-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
1) if q->tk_offset == TK_OFFS_MAX, then get_tcp_tstamp() calls
ktime_mono_to_any() with out-of-bound value.
2) if q->tk_offset is changed in taprio_parse_clockid(),
taprio_get_time() might also call ktime_mono_to_any()
with out-of-bound value as sysbot found:
UBSAN: array-index-out-of-bounds in kernel/time/timekeeping.c:908:27
index 3 is out of range for type 'ktime_t *[3]'
CPU: 1 PID: 25668 Comm: kworker/u4:0 Not tainted 5.15.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
ubsan_epilogue+0xb/0x5a lib/ubsan.c:151
__ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291
ktime_mono_to_any+0x1d4/0x1e0 kernel/time/timekeeping.c:908
get_tcp_tstamp net/sched/sch_taprio.c:322 [inline]
get_packet_txtime net/sched/sch_taprio.c:353 [inline]
taprio_enqueue_one+0x5b0/0x1460 net/sched/sch_taprio.c:420
taprio_enqueue+0x3b1/0x730 net/sched/sch_taprio.c:485
dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3785
__dev_xmit_skb net/core/dev.c:3869 [inline]
__dev_queue_xmit+0x1f6e/0x3630 net/core/dev.c:4194
batadv_send_skb_packet+0x4a9/0x5f0 net/batman-adv/send.c:108
batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:393 [inline]
batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:421 [inline]
batadv_iv_send_outstanding_bat_ogm_packet+0x6d7/0x8e0 net/batman-adv/bat_iv_ogm.c:1701
process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298
worker_thread+0x658/0x11f0 kernel/workqueue.c:2445
kthread+0x405/0x4f0 kernel/kthread.c:327
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
Fixes: 7ede7b03484b ("taprio: make clock reference conversions easier")
Fixes: 54002066100b ("taprio: Adjust timestamps for TCP packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vedang Patel <vedang.patel@intel.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20211108180815.1822479-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the amt module is being removed, it calls flush_delayed_work() to exit
source_gc_wq. But it wouldn't be exited properly because the
amt_source_gc_work(), which is the callback function of source_gc_wq
internally calls mod_delayed_work() again.
So, amt_source_gc_work() would be called after the amt module is removed.
Therefore kernel panic would occur.
In order to avoid it, cancel_delayed_work() should be used instead of
flush_delayed_work().
Test commands:
modprobe amt
modprobe -rv amt
Splat looks like:
BUG: unable to handle page fault for address: fffffbfff80f50db
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 1237ee067 P4D 1237ee067 PUD 1237b2067 PMD 100c11067 PTE 0
Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN PTI
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.15.0+ #27
5a0ebebc29fe5c40c68bea90197606c3a832b09f
RIP: 0010:run_timer_softirq+0x221/0xfc0
Code: 00 00 4c 89 e1 4c 8b 30 48 c1 e9 03 80 3c 29 00 0f 85 ed 0b 00 00
4d 89 34 24 4d 85 f6 74 19 49 8d 7e 08 48 89 f9 48 c1 e9 03 <80> 3c 29 00
0f 85 fa 0b 00 00 4d 89 66 08 83 04 24 01 49 89 d4 48
RSP: 0018:ffff888119009e50 EFLAGS: 00010806
RAX: ffff8881191f8a80 RBX: 00000000007ffe2a RCX: 1ffffffff80f50db
RDX: ffff888119009ed0 RSI: 0000000000000008 RDI: ffffffffc07a86d8
RBP: dffffc0000000000 R08: ffff8881191f8280 R09: ffffed102323f061
R10: ffff8881191f8307 R11: ffffed102323f060 R12: ffff888119009ec8
R13: 00000000000000c0 R14: ffffffffc07a86d0 R15: ffff8881191f82e8
FS: 0000000000000000(0000) GS:ffff888119000000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffbfff80f50db CR3: 00000001062dc002 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
? add_timer+0x650/0x650
? kvm_clock_read+0x14/0x30
? ktime_get+0xb9/0x180
? rcu_read_lock_held_common+0xe/0xa0
? rcu_read_lock_sched_held+0x56/0xc0
? rcu_read_lock_bh_held+0xa0/0xa0
? hrtimer_interrupt+0x271/0x790
__do_softirq+0x1d0/0x88f
irq_exit_rcu+0xe7/0x120
sysvec_apic_timer_interrupt+0x8a/0xb0
</IRQ>
<TASK>
[ ... ]
Fixes: bc54e49c140b ("amt: add multicast(IGMP) report message handler")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20211108145340.17208-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Model 88E6191X only supports >1G speeds on port 10. Port 0 and 9 are
only 1G.
Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20211104171747.10509-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2021-11-09
We've added 7 non-merge commits during the last 3 day(s) which contain
a total of 10 files changed, 174 insertions(+), 48 deletions(-).
The main changes are:
1) Various sockmap fixes, from John and Jussi.
2) Fix out-of-bound issue with bpf_pseudo_func, from Martin.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: sk_skb data_end access incorrect when src_reg = dst_reg
bpf: sockmap, strparser, and tls are reusing qdisc_skb_cb and colliding
bpf, sockmap: Fix race in ingress receive verdict with redirect to self
bpf, sockmap: Remove unhash handler for BPF sockmap usage
bpf, sockmap: Use stricter sk state checks in sk_lookup_assign
bpf: selftest: Trigger a DCE on the whole subprog
bpf: Stop caching subprog index in the bpf_pseudo_func insn
====================
Link: https://lore.kernel.org/r/20211109215702.38350-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull more block driver updates from Jens Axboe:
- Last series adding error handling support for add_disk() in drivers.
After this one, and once the SCSI side has been merged, we can
finally annotate add_disk() as must_check. (Luis)
- bcache fixes (Coly)
- zram fixes (Ming)
- ataflop locking fix (Tetsuo)
- nbd fixes (Ye, Yu)
- MD merge via Song
- Cleanup (Yang)
- sysfs fix (Guoqing)
- Misc fixes (Geert, Wu, luo)
* tag 'for-5.16/drivers-2021-11-09' of git://git.kernel.dk/linux-block: (34 commits)
bcache: Revert "bcache: use bvec_virt"
ataflop: Add missing semicolon to return statement
floppy: address add_disk() error handling on probe
ataflop: address add_disk() error handling on probe
block: update __register_blkdev() probe documentation
ataflop: remove ataflop_probe_lock mutex
mtd/ubi/block: add error handling support for add_disk()
block/sunvdc: add error handling support for add_disk()
z2ram: add error handling support for add_disk()
nvdimm/pmem: use add_disk() error handling
nvdimm/pmem: cleanup the disk if pmem_release_disk() is yet assigned
nvdimm/blk: add error handling support for add_disk()
nvdimm/blk: avoid calling del_gendisk() on early failures
nvdimm/btt: add error handling support for add_disk()
nvdimm/btt: use goto error labels on btt_blk_init()
loop: Remove duplicate assignments
drbd: Fix double free problem in drbd_create_device
nvdimm/btt: do not call del_gendisk() if not needed
bcache: fix use-after-free problem in bcache_device_free()
zram: replace fsync_bdev with sync_blockdev
...
|
|
Pull block fixes from Jens Axboe:
- Set of fixes for the batched tag allocation (Ming, me)
- add_disk() error handling fix (Luis)
- Nested queue quiesce fixes (Ming)
- Shared tags init error handling fix (Ye)
- Misc cleanups (Jean, Ming, me)
* tag 'for-5.16/block-2021-11-09' of git://git.kernel.dk/linux-block:
nvme: wait until quiesce is done
scsi: make sure that request queue queiesce and unquiesce balanced
scsi: avoid to quiesce sdev->request_queue two times
blk-mq: add one API for waiting until quiesce is done
blk-mq: don't free tags if the tag_set is used by other device in queue initialztion
block: fix device_add_disk() kobject_create_and_add() error handling
block: ensure cached plug request matches the current queue
block: move queue enter logic into blk_mq_submit_bio()
block: make bio_queue_enter() fast-path available inline
block: split request allocation components into helpers
block: have plug stored requests hold references to the queue
blk-mq: update hctx->nr_active in blk_mq_end_request_batch()
blk-mq: add RQF_ELV debug entry
blk-mq: only try to run plug merge if request has same queue with incoming bio
block: move RQF_ELV setting into allocators
dm: don't stop request queue after the dm device is suspended
block: replace always false argument with 'false'
block: assign correct tag before doing prefetch of request
blk-mq: fix redundant check of !e expression
|
|
Pull more bdev size updates from Jens Axboe:
"Two followup changes for the bdev-size series from this merge window:
- Add loff_t cast to bdev_nr_bytes() (Christoph)
- Use bdev_nr_bytes() consistently for the block parts at least (me)"
* tag 'for-5.16/bdev-size-2021-11-09' of git://git.kernel.dk/linux-block:
block: use new bdev_nr_bytes() helper for blkdev_{read,write}_iter()
block: add a loff_t cast to bdev_nr_bytes
|
|
Pull io_uring fixes from Jens Axboe:
"Minor fixes that should go into the 5.16 release:
- Fix max worker setting not working correctly on NUMA (Beld)
- Correctly return current setting for max workers if zeroes are
passed in (Pavel)
- io_queue_sqe_arm_apoll() cleanup, as identified during the initial
merge (Pavel)
- Misc fixes (Nghia, me)"
* tag 'io_uring-5.16-2021-11-09' of git://git.kernel.dk/linux-block:
io_uring: honour zeroes as io-wq worker limits
io_uring: remove dead 'sqe' store
io_uring: remove redundant assignment to ret in io_register_iowq_max_workers()
io-wq: fix max-workers not correctly set on multi-node system
io_uring: clean up io_queue_sqe_arm_apoll
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Add DM core support for emitting audit events through the audit
subsystem. Also enhance both the integrity and crypt targets to emit
events to via dm-audit.
- Various other simple code improvements and cleanups.
* tag 'for-5.16/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm table: log table creation error code
dm: make workqueue names device-specific
dm writecache: Make use of the helper macro kthread_run()
dm crypt: Make use of the helper macro kthread_run()
dm verity: use bvec_kmap_local in verity_for_bv_block
dm log writes: use memcpy_from_bvec in log_writes_map
dm integrity: use bvec_kmap_local in __journal_read_write
dm integrity: use bvec_kmap_local in integrity_metadata
dm: add add_disk() error handling
dm: Remove redundant flush_workqueue() calls
dm crypt: log aead integrity violations to audit subsystem
dm integrity: log audit events for dm-integrity target
dm: introduce audit event module for device mapper
|
|
Pull dma-mapping updates from Christoph Hellwig:
"Just a small set of changes this time. The request dma_direct_alloc
cleanups are still under review and haven't made the cut.
Summary:
- convert sparc32 to the generic dma-direct code
- use bitmap_zalloc (Christophe JAILLET)"
* tag 'dma-mapping-5.16' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: use 'bitmap_zalloc()' when applicable
sparc32: use DMA_DIRECT_REMAP
sparc32: remove dma_make_coherent
sparc32: remove the call to dma_make_coherent in arch_dma_free
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs updates from Miklos Szeredi:
- Fix a regression introduced in the last cycle
- Fix a use-after-free in the AIO path
- Fix a bogus warning reported by syzbot
* tag 'ovl-update-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: fix filattr copy-up failure
ovl: fix warning in ovl_create_real()
ovl: fix use after free in struct ovl_aio_req
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Fix a possible of deadlock in case inode writeback is in progress
during dentry reclaim
- Fix a crash in case of page stealing
- Selectively invalidate cached attributes, possibly improving
performance
- Allow filesystems to disable data flushing from ->flush()
- Misc fixes and cleanups
* tag 'fuse-update-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (23 commits)
fuse: fix page stealing
virtiofs: use strscpy for copying the queue name
fuse: add FOPEN_NOFLUSH
fuse: only update necessary attributes
fuse: take cache_mask into account in getattr
fuse: add cache_mask
fuse: move reverting attributes to fuse_change_attributes()
fuse: simplify local variables holding writeback cache state
fuse: cleanup code conditional on fc->writeback_cache
fuse: fix attr version comparison in fuse_read_update_size()
fuse: always invalidate attributes after writes
fuse: rename fuse_write_update_size()
fuse: don't bump attr_version in cached write
fuse: selective attribute invalidation
fuse: don't increment nlink in link()
fuse: decrement nlink on overwriting rename
fuse: simplify __fuse_write_file_get()
fuse: move fuse_invalidate_attr() into fuse_update_ctime()
fuse: delete redundant code
fuse: use kmap_local_page()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux
Pull orangefs fixes from Mike Marshall:
- fix sb refcount leak when allocate sb info failed (Chenyuan Mi)
- fix error return code of orangefs_revalidate_lookup() (Jia-Ju Bai)
- remove redundant initialization of variable ret (Colin Ian King)
* tag 'for-linus-5.16-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
orangefs: Fix sb refcount leak when allocate sb info failed.
fs: orangefs: fix error return code of orangefs_revalidate_lookup()
orangefs: Remove redundant initialization of variable ret
|
|
Pull 9p updates from Dominique Martinet:
"Fixes, netfs read support and checkpatch rewrite:
- fix syzcaller uninitialized value usage after missing error check
- add module autoloading based on transport name
- convert cached reads to use netfs helpers
- adjust readahead based on transport msize
- and many, many checkpatch.pl warning fixes..."
* tag '9p-for-5.16-rc1' of git://github.com/martinetd/linux:
9p: fix a bunch of checkpatch warnings
9p: set readahead and io size according to maxsize
9p p9mode2perm: remove useless strlcpy and check sscanf return code
9p v9fs_parse_options: replace simple_strtoul with kstrtouint
9p: fix file headers
fs/9p: fix indentation and Add missing a blank line after declaration
fs/9p: fix warnings found by checkpatch.pl
9p: fix minor indentation and codestyle
fs/9p: cleanup: opening brace at the beginning of the next line
9p: Convert to using the netfs helper lib to do reads and caching
fscache_cookie_enabled: check cookie is valid before accessing it
net/9p: autoload transport modules
9p/net: fix missing error check in p9_check_errors
|
|
Merge more updates from Andrew Morton:
"87 patches.
Subsystems affected by this patch series: mm (pagecache and hugetlb),
procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs,
init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork,
sysvfs, kcov, gdb, resource, selftests, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (87 commits)
ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL
ipc: check checkpoint_restore_ns_capable() to modify C/R proc files
selftests/kselftest/runner/run_one(): allow running non-executable files
virtio-mem: disallow mapping virtio-mem memory via /dev/mem
kernel/resource: disallow access to exclusive system RAM regions
kernel/resource: clean up and optimize iomem_is_exclusive()
scripts/gdb: handle split debug for vmlinux
kcov: replace local_irq_save() with a local_lock_t
kcov: avoid enable+disable interrupts if !in_task()
kcov: allocate per-CPU memory on the relevant node
Documentation/kcov: define `ip' in the example
Documentation/kcov: include types.h in the example
sysv: use BUILD_BUG_ON instead of runtime check
kernel/fork.c: unshare(): use swap() to make code cleaner
seq_file: fix passing wrong private data
seq_file: move seq_escape() to a header
signal: remove duplicate include in signal.h
crash_dump: remove duplicate include in crash_dump.h
crash_dump: fix boolreturn.cocci warning
hfs/hfsplus: use WARN_ON for sanity check
...
|
|
Compilation of ipc/ipc_sysctl.c is controlled by
obj-$(CONFIG_SYSVIPC_SYSCTL)
[see ipc/Makefile]
And CONFIG_SYSVIPC_SYSCTL depends on SYSCTL
[see init/Kconfig]
An SYSCTL is selected by PROC_SYSCTL.
[see fs/proc/Kconfig]
Thus: #ifndef CONFIG_PROC_SYSCTL in ipc/ipc_sysctl.c is impossible, the
fallback can be removed.
Link: https://lkml.kernel.org/r/20210918145337.3369-1-manfred@colorfullife.com
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This commit removes the requirement to be root to modify sem_next_id,
msg_next_id and shm_next_id and checks checkpoint_restore_ns_capable
instead.
Since those files are specific to the IPC namespace, there is no reason
they should require root privileges. This is similar to ns_last_pid,
which also only checks checkpoint_restore_ns_capable.
[akpm@linux-foundation.org: ipc/ipc_sysctl.c needs capability.h for checkpoint_restore_ns_capable()]
Link: https://lkml.kernel.org/r/20210916163717.3179496-1-mclapinski@google.com
Signed-off-by: Michal Clapinski <mclapinski@google.com>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Manfred Spraul <manfred@colorfullife.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When running a test program, 'run_one()' checks if the program has the
execution permission and fails if it doesn't. However, it's easy to
mistakenly lose the permissions, as some common tools like 'diff' don't
support the permission change well[1]. Compared to that, making mistakes
in the test program's path would only rare, as those are explicitly listed
in 'TEST_PROGS'. Therefore, it might make more sense to resolve the
situation on our own and run the program.
For this reason, this commit makes the test program runner function still
print the warning message but to try parsing the interpreter of the
program and to explicitly run it with the interpreter, in this case.
[1] https://lore.kernel.org/mm-commits/YRJisBs9AunccCD4@kroah.com/
Link: https://lkml.kernel.org/r/20210810164534.25902-1-sj38.park@gmail.com
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We don't want user space to be able to map virtio-mem device memory
directly (e.g., via /dev/mem) in order to have guarantees that in a sane
setup we'll never accidentially access unplugged memory within the
device-managed region of a virtio-mem device, just as required by the
virtio-spec.
As soon as the virtio-mem driver is loaded, the device region is visible
in /proc/iomem via the parent device region. From that point on user
space is aware of the device region and we want to disallow mapping
anything inside that region (where we will dynamically (un)plug memory)
until the driver has been unloaded cleanly and e.g., another driver might
take over.
By creating our parent IORESOURCE_SYSTEM_RAM resource with
IORESOURCE_EXCLUSIVE, we will disallow any /dev/mem access to our device
region until the driver was unloaded cleanly and removed the parent
region. This will work even though only some memory blocks are actually
currently added to Linux and appear as busy in the resource tree.
So access to the region from user space is only possible
a) if we don't load the virtio-mem driver.
b) after unloading the virtio-mem driver cleanly.
Don't build virtio-mem if access to /dev/mem cannot be restricticted -- if
we have CONFIG_DEVMEM=y but CONFIG_STRICT_DEVMEM is not set.
Link: https://lkml.kernel.org/r/20210920142856.17758-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
virtio-mem dynamically exposes memory inside a device memory region as
system RAM to Linux, coordinating with the hypervisor which parts are
actually "plugged" and consequently usable/accessible.
On the one hand, the virtio-mem driver adds/removes whole memory blocks,
creating/removing busy IORESOURCE_SYSTEM_RAM resources, on the other
hand, it logically (un)plugs memory inside added memory blocks,
dynamically either exposing them to the buddy or hiding them from the
buddy and marking them PG_offline.
In contrast to physical devices, like a DIMM, the virtio-mem driver is
required to actually make use of any of the device-provided memory,
because it performs the handshake with the hypervisor. virtio-mem
memory cannot simply be access via /dev/mem without a driver.
There is no safe way to:
a) Access plugged memory blocks via /dev/mem, as they might contain
unplugged holes or might get silently unplugged by the virtio-mem
driver and consequently turned inaccessible.
b) Access unplugged memory blocks via /dev/mem because the virtio-mem
driver is required to make them actually accessible first.
The virtio-spec states that unplugged memory blocks MUST NOT be written,
and only selected unplugged memory blocks MAY be read. We want to make
sure, this is the case in sane environments -- where the virtio-mem driver
was loaded.
We want to make sure that in a sane environment, nobody "accidentially"
accesses unplugged memory inside the device managed region. For example,
a user might spot a memory region in /proc/iomem and try accessing it via
/dev/mem via gdb or dumping it via something else. By the time the mmap()
happens, the memory might already have been removed by the virtio-mem
driver silently: the mmap() would succeeed and user space might
accidentially access unplugged memory.
So once the driver was loaded and detected the device along the
device-managed region, we just want to disallow any access via /dev/mem to
it.
In an ideal world, we would mark the whole region as busy ("owned by a
driver") and exclude it; however, that would be wrong, as we don't really
have actual system RAM at these ranges added to Linux ("busy system RAM").
Instead, we want to mark such ranges as "not actual busy system RAM but
still soft-reserved and prepared by a driver for future use."
Let's teach iomem_is_exclusive() to reject access to any range with
"IORESOURCE_SYSTEM_RAM | IORESOURCE_EXCLUSIVE", even if not busy and even
if "iomem=relaxed" is set. Introduce EXCLUSIVE_SYSTEM_RAM to make it
easier for applicable drivers to depend on this setting in their Kconfig.
For now, there are no applicable ranges and we'll modify virtio-mem next
to properly set IORESOURCE_EXCLUSIVE on the parent resource container it
creates to contain all actual busy system RAM added via
add_memory_driver_managed().
Link: https://lkml.kernel.org/r/20210920142856.17758-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "virtio-mem: disallow mapping virtio-mem memory via /dev/mem", v5.
Let's add the basic infrastructure to exclude some physical memory regions
marked as "IORESOURCE_SYSTEM_RAM" completely from /dev/mem access, even
though they are not marked IORESOURCE_BUSY and even though "iomem=relaxed"
is set. Resource IORESOURCE_EXCLUSIVE for that purpose instead of adding
new flags to express something similar to "soft-busy" or "not busy yet,
but already prepared by a driver and not to be mapped by user space".
Use it for virtio-mem, to disallow mapping any virtio-mem memory via
/dev/mem to user space after the virtio-mem driver was loaded.
This patch (of 3):
We end up traversing subtrees of ranges we are not interested in; let's
optimize this case, skipping such subtrees, cleaning up the function a
bit.
For example, in the following configuration (/proc/iomem):
00000000-00000fff : Reserved
00001000-00057fff : System RAM
00058000-00058fff : Reserved
00059000-0009cfff : System RAM
0009d000-000fffff : Reserved
000a0000-000bffff : PCI Bus 0000:00
000c0000-000c3fff : PCI Bus 0000:00
000c4000-000c7fff : PCI Bus 0000:00
000c8000-000cbfff : PCI Bus 0000:00
000cc000-000cffff : PCI Bus 0000:00
000d0000-000d3fff : PCI Bus 0000:00
000d4000-000d7fff : PCI Bus 0000:00
000d8000-000dbfff : PCI Bus 0000:00
000dc000-000dffff : PCI Bus 0000:00
000e0000-000e3fff : PCI Bus 0000:00
000e4000-000e7fff : PCI Bus 0000:00
000e8000-000ebfff : PCI Bus 0000:00
000ec000-000effff : PCI Bus 0000:00
000f0000-000fffff : PCI Bus 0000:00
000f0000-000fffff : System ROM
00100000-3fffffff : System RAM
40000000-403fffff : Reserved
40000000-403fffff : pnp 00:00
40400000-80a79fff : System RAM
...
We don't have to look at any children of "0009d000-000fffff : Reserved"
if we can just skip these 15 items directly because the parent range is
not of interest.
Link: https://lkml.kernel.org/r/20210920142856.17758-1-david@redhat.com
Link: https://lkml.kernel.org/r/20210920142856.17758-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is related to two previous changes. Commit dfe4529ee4d3
("scripts/gdb: find vmlinux where it was before") and commit da036ae14762
("scripts/gdb: handle split debug").
Although Chrome OS has been using the debug suffix for modules for a
while, it has just recently started using it for vmlinux as well. That
means we've now got to improve the detection of "vmlinux" to also handle
that it might end with ".debug".
Link: https://lkml.kernel.org/r/20211028151120.v2.1.Ie6bd5a232f770acd8c9ffae487a02170bad3e963@changeid
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The kcov code mixes local_irq_save() and spin_lock() in
kcov_remote_{start|end}(). This creates a warning on PREEMPT_RT because
local_irq_save() disables interrupts and spin_lock_t is turned into a
sleeping lock which can not be acquired in a section with disabled
interrupts.
The kcov_remote_lock is used to synchronize the access to the hash-list
kcov_remote_map. The local_irq_save() block protects access to the
per-CPU data kcov_percpu_data.
There is no compelling reason to change the lock type to raw_spin_lock_t
to make it work with local_irq_save(). Changing it would require to
move memory allocation (in kcov_remote_add()) and deallocation outside
of the locked section.
Adding an unlimited amount of entries to the hashlist will increase the
IRQ-off time during lookup. It could be argued that this is debug code
and the latency does not matter. There is however no need to do so and
it would allow to use this facility in an RT enabled build.
Using a local_lock_t instead of local_irq_save() has the befit of adding
a protection scope within the source which makes it obvious what is
protected. On a !PREEMPT_RT && !LOCKDEP build the local_lock_irqsave()
maps directly to local_irq_save() so there is overhead at runtime.
Replace the local_irq_save() section with a local_lock_t.
Link: https://lkml.kernel.org/r/20210923164741.1859522-6-bigeasy@linutronix.de
Link: https://lore.kernel.org/r/20210830172627.267989-6-bigeasy@linutronix.de
Reported-by: Clark Williams <williams@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Marco Elver <elver@google.com>
Tested-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
kcov_remote_start() may need to allocate memory in the in_task() case
(otherwise per-CPU memory has been pre-allocated) and therefore requires
enabled interrupts.
The interrupts are enabled before checking if the allocation is required
so if no allocation is required then the interrupts are needlessly enabled
and disabled again.
Enable interrupts only if memory allocation is performed.
Link: https://lkml.kernel.org/r/20210923164741.1859522-5-bigeasy@linutronix.de
Link: https://lore.kernel.org/r/20210830172627.267989-5-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Marco Elver <elver@google.com>
Tested-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
During boot kcov allocates per-CPU memory which is used later if remote/
softirq processing is enabled.
Allocate the per-CPU memory on the CPU local node to avoid cross node
memory access.
Link: https://lkml.kernel.org/r/20210923164741.1859522-4-bigeasy@linutronix.de
Link: https://lore.kernel.org/r/20210830172627.267989-4-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Marco Elver <elver@google.com>
Tested-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The example code uses the variable `ip' but never declares it.
Declare `ip' as a 64bit variable which is the same type as the array
from which it loads its value.
Link: https://lkml.kernel.org/r/20210923164741.1859522-3-bigeasy@linutronix.de
Link: https://lore.kernel.org/r/20210830172627.267989-3-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Marco Elver <elver@google.com>
Tested-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "kcov: PREEMPT_RT fixup + misc", v2.
The last patch in series is follow-up to address the PREEMPT_RT issue
within in kcov reported by Clark [1]. Patches 1-3 are smaller things that
I noticed while staring at it. Patch 4 is small change which makes
replacement in #5 simpler / more obvious.
[1] https://lkml.kernel.org/r/20210809155909.333073de@theseus.lan
This patch (of 5):
The first example code has includes at the top, the following two
example share that part. The last example (remote coverage collection)
requires the linux/types.h header file due its __aligned_u64 usage.
Add the linux/types.h to the top most example and a comment that the
header files from above are required as it is done in the second
example.
Link: https://lkml.kernel.org/r/20210923164741.1859522-1-bigeasy@linutronix.de
Link: https://lore.kernel.org/r/20210830172627.267989-2-bigeasy@linutronix.de
Link: https://lkml.kernel.org/r/20210923164741.1859522-2-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Marco Elver <elver@google.com>
Tested-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Clark Williams <williams@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There were runtime checks about sizes of struct v7_super_block and struct
sysv_inode. If one of these checks fail the kernel will panic. Since
these values are known at compile time let's use BUILD_BUG_ON(), because
it's a standard mechanism for validation checking at build time
Link: https://lkml.kernel.org/r/20210813123020.22971-1-paskripkin@gmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use swap() instead of reimplementing it.
Link: https://lkml.kernel.org/r/20210909022046.8151-1-ran.xiaokai@zte.com.cn
Signed-off-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Cc: Gabriel Krisman Bertazi <krisman@collabora.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alexey Gladkov <legion@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
DEFINE_PROC_SHOW_ATTRIBUTE() is supposed to be used to define a series
of functions and variables to register proc file easily. And the users
can use proc_create_data() to pass their own private data and get it
via seq->private in the callback. Unfortunately, the proc file system
use PDE_DATA() to get private data instead of inode->i_private. So fix
it. Fortunately, there only one user of it which does not pass any
private data, so this bug does not break any in-tree codes.
Link: https://lkml.kernel.org/r/20211029032638.84884-1-songmuchun@bytedance.com
Fixes: 97a32539b956 ("proc: convert everything to "struct proc_ops"")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Florent Revest <revest@chromium.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Move seq_escape() to the header as inliner, for a small kernel text size
reduction.
Link: https://lkml.kernel.org/r/20211001122917.67228-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
