summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-08-31nvmet-tcp: fix unhandled tcp states in nvmet_tcp_state_change()Maurizio Lombardi
TCP_FIN_WAIT2 and TCP_LAST_ACK were not handled, the connection is closing so we can ignore them and avoid printing the "unhandled state" warning message. [ 1298.852386] nvmet_tcp: queue 2 unhandled state 5 [ 1298.879112] nvmet_tcp: queue 7 unhandled state 5 [ 1298.884253] nvmet_tcp: queue 8 unhandled state 5 [ 1298.889475] nvmet_tcp: queue 9 unhandled state 5 v2: Do not call nvmet_tcp_schedule_release_queue(), just ignore the fin_wait2 and last_ack states. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-08-31nvmet-auth: add missing goto in nvmet_setup_auth()Hannes Reinecke
There's a goto missing in nvmet_setup_auth(), causing a kernel oops when nvme_auth_extract_key() fails. Reported-by: Tal Lossos <tallossos@gmail.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-08-31nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM610Shyamin Ayesh
Lexar NM610 reports bogus eui64 values that appear to be the same across all drives. Quirk them out so they are not marked as "non globally unique" duplicates. Signed-off-by: Shyamin Ayesh <me@shyamin.com> [patch formatting] Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-08-30cifs: fix small mempool leak in SMB2_negotiate()Enzo Matsumiya
In some cases of failure (dialect mismatches) in SMB2_negotiate(), after the request is sent, the checks would return -EIO when they should be rather setting rc = -EIO and jumping to neg_exit to free the response buffer from mempool. Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de> Cc: stable@vger.kernel.org Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-08-30smb3: use filemap_write_and_wait_range instead of filemap_write_and_waitSteve French
When doing insert range and collapse range we should be writing out the cached pages for the ranges affected but not the whole file. Fixes: c3a72bb21320 ("smb3: Move the flush out of smb2_copychunk_range() into its callers") Cc: stable@vger.kernel.org Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-08-30drm/amdgpu: only init tap_delay ucode when it's included in ucode binaryHawking Zhang
Not all the gfx10 variants need to integrate global tap_delay and per se tap_delay firmwares Only init tap_delay ucode when it does include in rlc ucode binary so driver doesn't send a null buffer to psp for firmware loading Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: Fix black flash when switching from ODM2to1 to ODMBypassVladimir Stempen
[Why] On secondary display hotplug we switch primary stream from ODM2to1 to ODMBypass mode. Current logic will trigger disabling front end for this stream. [How] We need to check if prev_odm_pipe is equal to NULL in order to disable dangling planes in this scenario. Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: Fix check for stream and planeEthan Wellenreiter
[WHY] Function wasn't returning false when it had a no stream [HOW] Made it return false when it had no stream. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Ethan Wellenreiter <Ethan.Wellenreiter@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: Re-initialize viewport after pipe mergeEthan Wellenreiter
[Why] Pipes get merged in preparation for SubVP but if they don't get used, and are in ODM or some other multi pipe config, it would calculate the voltage level with a viewport of just one pipe from when they were split resulting in too low of a voltage level. [How] Made it so that the viewport and other timing settings get rebuilt and re- initialized after the pipe merge, before calculating the voltage level so it would calculate it correctly. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Ethan Wellenreiter <Ethan.Wellenreiter@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: Use correct plane for CAB cursor size allocationAurabindo Pillai
[Why&How] plane and stream variables used for cursor size allocation calculation were stale from previous iteration. Redo the iteration to find the correct cursor plane for the calculation. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amdgpu: ensure no PCIe peer access for CPU XGMI iolinksAlex Sierra
[Why] Devices with CPU XGMI iolink do not support PCIe peer access. Signed-off-by: Alex Sierra <alex.sierra@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/pm: bump SMU 13.0.0 driver_if header versionEvan Quan
To suppress the warning about version mismatch with the latest 78.54.0 PMFW. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/pm: use vbios carried pptable for all SMU13.0.7 SKUsEvan Quan
For those SMU13.0.7 unsecure SKUs, the vbios carried pptable is ready to go. Use that one instead of hardcoded softpptable. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/pm: use vbios carried pptable for those supported SKUsEvan Quan
For some SMU13.0.0 SKUs, the vbios carried pptable is ready to go. Use that one instead of hardcoded softpptable. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: fix wrong register accessCharlene Liu
[why] fw version check was for release branch. for staging, it has a chance to enter wrong code path. Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: use actual cursor size instead of max for CAB allocationAurabindo Pillai
[Why&How] When calculating allocation for cursor size, get the real cursor through the HUBP instead of using the maximum cursor size for more optimal allocation Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: disable display fresh from MALL on an edge case for DCN321Aurabindo Pillai
[Why&How] When using a 4k monitor when cursor caching is not supported due to framebuffer being on an uncacheable address, enabling display refresh from MALL would trigger corruption if SS is enabled. Prevent entering SS if we are on the edge case and cursor caching is not possible. Do this only if cursor size larger than a 64x64@4bpp. Pull the cursor size calculation out of if condition since cursor address may not be set on all platforms Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: Fix CAB cursor size allocation for DCN32/321Aurabindo Pillai
For calculating cursor size allocation, surface size was used, resulting in over allocation Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: Missing HPO instance addedLeo Chen
[Why & How] Number of encoder is set to 4 but only 3 instances are created. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: set dig fifo read start level to 7 before dig fifo resetWang Fudong
[Why] DIG_FIFO_ERROR = 1 caused mst daisy chain 2nd monitor black. [How] We need to set dig fifo read start level = 7 before dig fifo reset during dig fifo enable according to hardware designer's suggestion. If it is zero, it will cause underflow or overflow and DIG_FIFO_ERROR = 1. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Wang Fudong <Fudong.Wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amdgpu: Fix use-after-free in amdgpu_cs_ioctlYuBiao Wang
[Why] In amdgpu_cs_ioctl, amdgpu_job_free could be performed ealier if there is -ERESTARTSYS error. In this case, job->hw_fence could be not initialized yet. Putting hw_fence during amdgpu_job_free could lead to a use-after-free warning. [How] Check if drm_sched_job_init is performed before job_free by checking s_fence. v2: Check hw_fence.ops instead since it could be NULL if fence is not initialized. Reverse the condition since !=NULL check is discouraged in kernel. Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: Fix OTG H timing reset for dcn314Duncan Ma
[Why] When ODM is enabled, H timing control register reset to 0. Div mode manual field get overwritten causing no display on certain modes for dcn314. [How] Use REG_UPDATE instead of REG_SET to set div_mode field. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Duncan Ma <duncan.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: Fix DCN32 DPSTREAMCLK_CNTL programmingGeorge Shen
[Why] Each index in the DPSTREAMCLK_CNTL register phyiscally maps 1-to-1 with HPO stream encoder instance. On the other hand, each index in DTBCLK_P_CNTL physically maps 1-to-1 with OTG instance. Current DCN32 DPSTREAMCLK_CLK programing assumes that OTG instance always maps 1-to-1 with HPO stream encoder instance. This is not always guaranteed and can result in blackscreen. [How] Program the correct dpstreamclk instance with the correct dtbclk_p source. Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amdgpu: Update mes_v11_api_def.hGraham Sider
New GFX11 MES FW adds the trap_en bit. For now hardcode to 1 (traps enabled). Signed-off-by: Graham Sider <Graham.Sider@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amdgpu: disable FRU access on special SIENNA CICHLID cardGuchun Chen
Below driver load error will be printed, not friendly to end user. amdgpu: ATOM BIOS: 113-D603GLXE-077 [drm] FRU: Failed to get size field [drm:amdgpu_fru_get_product_info [amdgpu]] *ERROR* Failed to read FRU Manufacturer, ret:-5 Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30s390/hugetlb: fix prepare_hugepage_range() check for 2 GB hugepagesGerald Schaefer
The alignment check in prepare_hugepage_range() is wrong for 2 GB hugepages, it only checks for 1 MB hugepage alignment. This can result in kernel crash in __unmap_hugepage_range() at the BUG_ON(start & ~huge_page_mask(h)) alignment check, for mappings created with MAP_FIXED at unaligned address. Fix this by correctly handling multiple hugepage sizes, similar to the generic version of prepare_hugepage_range(). Fixes: d08de8e2d867 ("s390/mm: add support for 2GB hugepages") Cc: <stable@vger.kernel.org> # 4.8+ Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-08-30s390: update defconfigsHeiko Carstens
Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-08-30s390: fix nospec table alignmentsJosh Poimboeuf
Add proper alignment for .nospec_call_table and .nospec_return_table in vmlinux. [hca@linux.ibm.com]: The problem with the missing alignment of the nospec tables exist since a long time, however only since commit e6ed91fd0768 ("s390/alternatives: remove padding generation code") and with CONFIG_RELOCATABLE=n the kernel may also crash at boot time. The above named commit reduced the size of struct alt_instr by one byte, so its new size is 11 bytes. Therefore depending on the number of cpu alternatives the size of the __alt_instructions array maybe odd, which again also causes that the addresses of the nospec tables will be odd. If the address of __nospec_call_start is odd and the kernel is compiled With CONFIG_RELOCATABLE=n the compiler may generate code that loads the address of __nospec_call_start with a 'larl' instruction. This will generate incorrect code since the 'larl' instruction only works with even addresses. In result the members of the nospec tables will be accessed with an off-by-one offset, which subsequently may lead to addressing exceptions within __nospec_revert(). Fixes: f19fbd5ed642 ("s390: introduce execute-trampolines for branches") Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://lore.kernel.org/r/8719bf1ce4a72ebdeb575200290094e9ce047bcc.1661557333.git.jpoimboe@kernel.org Cc: <stable@vger.kernel.org> # 4.16 Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-08-30s390/mm: remove useless hugepage address alignmentGerald Schaefer
The failing address alignment to HPAGE_MASK in do_exception(), for hugetlb faults, was useless from the beginning. With 2 GB hugepage support it became wrong, but w/o further negative impact. Now it could have negative performance impact because it breaks the cacheline optimization for process_huge_page(). Therefore, remove it. Note that we still have failing address alignment by HW to PAGE_SIZE, for all page faults, not just hugetlb faults. So this patch will not fix UFFD_FEATURE_EXACT_ADDRESS for userfaultfd handling. It will just move the failing address for hugetlb faults a bit closer to the real address, at 4K page granularity, similar to normal page faults. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-08-30staging: rtl8712: fix use after free bugsDan Carpenter
_Read/Write_MACREG callbacks are NULL so the read/write_macreg_hdl() functions don't do anything except free the "pcmd" pointer. It results in a use after free. Delete them. Fixes: 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel") Cc: stable <stable@kernel.org> Reported-by: Zheng Wang <hackerzheng666@gmail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/Yw4ASqkYcUhUfoY2@kili Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30Merge tag 'mhi-fixes-for-v6.0' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-linus Manivannan writes: "A single fix targeting the MHI host stack: - Since the commit 1227d2a20cd7 ("bus: mhi: host: Move IRQ allocation to controller registration phase"), the MHI context gets freed during mhi_unregister_controller(). But when the MHI IRQs are shared, the IRQ handler may get invoked during __free_irq() if CONFIG_DEBUG_SHIRQ is set. In that case, there will be a null pointer dereference because of trying to use the freed context struct. So for fixing the issue, let's check for the existence of the context struct at the start of the handler before handling the IRQ." * tag 'mhi-fixes-for-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi: bus: mhi: host: Fix up null pointer access in mhi_irq_handler
2022-08-30Merge tag 'peci-fixes-6.0' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/iwi/linux into char-misc-linus Iwona writes: "PECI fixes for v6.0 Two minor fixes: * cpu - Fix use-after-free in adev_release() * aspeed - Fix error check for platform_get_irq()" * tag 'peci-fixes-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/iwi/linux: peci: cpu: Fix use-after-free in adev_release() peci: aspeed: fix error check return value of platform_get_irq()
2022-08-30usb: cdns3: fix issue with rearming ISO OUT endpointPawel Laszczak
ISO OUT endpoint is enabled during queuing first usb request in transfer ring and disabled when TRBERR is reported by controller. After TRBERR and before next transfer added to TR driver must again reenable endpoint but does not. To solve this issue during processing TRBERR event driver must set the flag EP_UPDATE_EP_TRBADDR in priv_ep->flags field. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") cc: <stable@vger.kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20220825062137.5766-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30usb: cdns3: fix incorrect handling TRB_SMM flag for ISOC transferPawel Laszczak
The TRB_SMM flag indicates that DMA has completed the TD service with this TRB. Usually it’s a last TRB in TD. In case of ISOC transfer for bInterval > 1 each ISOC transfer contains more than one TD associated with usb request (one TD per ITP). In such case the TRB_SMM flag will be set in every TD and driver will recognize the end of transfer after processing the first TD with TRB_SMM. In result driver stops updating request->actual and returns incorrect actual length. To fix this issue driver additionally must check TRB_CHAIN which is not used for isochronous transfers. Fixes: 249f0a25e8be ("usb: cdns3: gadget: handle sg list use case at completion correctly") cc: <stable@vger.kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20220825062207.5824-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30usb: gadget: mass_storage: Fix cdrom data transfers on MAC-OSKrishna Kurapati
During cdrom emulation, the response to read_toc command must contain the cdrom address as the number of sectors (2048 byte sized blocks) represented either as an absolute value (when MSF bit is '0') or in terms of PMin/PSec/PFrame (when MSF bit is set to '1'). Incase of cdrom, the fsg_lun_open call sets the sector size to 2048 bytes. When MAC OS sends a read_toc request with MSF set to '1', the store_cdrom_address assumes that the address being provided is the LUN size represented in 512 byte sized blocks instead of 2048. It tries to modify the address further to convert it to 2048 byte sized blocks and store it in MSF format. This results in data transfer failures as the cdrom address being provided in the read_toc response is incorrect. Fixes: 3f565a363cee ("usb: gadget: storage: adapt logic block size to bound block devices") Cc: stable@vger.kernel.org Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Link: https://lore.kernel.org/r/1661570110-19127-1-git-send-email-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30media: mceusb: Use new usb_control_msg_*() routinesAlan Stern
Automatic kernel fuzzing led to a WARN about invalid pipe direction in the mceusb driver: ------------[ cut here ]------------ usb 6-1: BOGUS control dir, pipe 80000380 doesn't match bRequestType 40 WARNING: CPU: 0 PID: 2465 at drivers/usb/core/urb.c:410 usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410 Modules linked in: CPU: 0 PID: 2465 Comm: kworker/0:2 Not tainted 5.19.0-rc4-00208-g69cb6c6556ad #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410 Code: 7c 24 40 e8 ac 23 91 fd 48 8b 7c 24 40 e8 b2 70 1b ff 45 89 e8 44 89 f1 4c 89 e2 48 89 c6 48 c7 c7 a0 30 a9 86 e8 48 07 11 02 <0f> 0b e9 1c f0 ff ff e8 7e 23 91 fd 0f b6 1d 63 22 83 05 31 ff 41 RSP: 0018:ffffc900032becf0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8881100f3058 RCX: 0000000000000000 RDX: ffffc90004961000 RSI: ffff888114c6d580 RDI: fffff52000657d90 RBP: ffff888105ad90f0 R08: ffffffff812c3638 R09: 0000000000000000 R10: 0000000000000005 R11: ffffed1023504ef1 R12: ffff888105ad9000 R13: 0000000000000040 R14: 0000000080000380 R15: ffff88810ba96500 FS: 0000000000000000(0000) GS:ffff88811a800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffe810bda58 CR3: 000000010b720000 CR4: 0000000000350ef0 Call Trace: <TASK> usb_start_wait_urb+0x101/0x4c0 drivers/usb/core/message.c:58 usb_internal_control_msg drivers/usb/core/message.c:102 [inline] usb_control_msg+0x31c/0x4a0 drivers/usb/core/message.c:153 mceusb_gen1_init drivers/media/rc/mceusb.c:1431 [inline] mceusb_dev_probe+0x258e/0x33f0 drivers/media/rc/mceusb.c:1807 The reason for the warning is clear enough; the driver sends an unusual read request on endpoint 0 but does not set the USB_DIR_IN bit in the bRequestType field. More importantly, the whole situation can be avoided and the driver simplified by converting it over to the relatively new usb_control_msg_recv() and usb_control_msg_send() routines. That's what this fix does. Link: https://lore.kernel.org/all/CAB7eexLLApHJwZfMQ=X-PtRhw0BgO+5KcSMS05FNUYejJXqtSA@mail.gmail.com/ Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: stable@vger.kernel.org Reported-and-tested-by: Rondreis <linhaoguo86@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/YwkfnBFCSEVC6XZu@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30USB: core: Prevent nested device-reset callsAlan Stern
Automatic kernel fuzzing revealed a recursive locking violation in usb-storage: ============================================ WARNING: possible recursive locking detected 5.18.0 #3 Not tainted -------------------------------------------- kworker/1:3/1205 is trying to acquire lock: ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at: usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230 but task is already holding lock: ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at: usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230 ... stack backtrace: CPU: 1 PID: 1205 Comm: kworker/1:3 Not tainted 5.18.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: usb_hub_wq hub_event Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_deadlock_bug kernel/locking/lockdep.c:2988 [inline] check_deadlock kernel/locking/lockdep.c:3031 [inline] validate_chain kernel/locking/lockdep.c:3816 [inline] __lock_acquire.cold+0x152/0x3ca kernel/locking/lockdep.c:5053 lock_acquire kernel/locking/lockdep.c:5665 [inline] lock_acquire+0x1ab/0x520 kernel/locking/lockdep.c:5630 __mutex_lock_common kernel/locking/mutex.c:603 [inline] __mutex_lock+0x14f/0x1610 kernel/locking/mutex.c:747 usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230 usb_reset_device+0x37d/0x9a0 drivers/usb/core/hub.c:6109 r871xu_dev_remove+0x21a/0x270 drivers/staging/rtl8712/usb_intf.c:622 usb_unbind_interface+0x1bd/0x890 drivers/usb/core/driver.c:458 device_remove drivers/base/dd.c:545 [inline] device_remove+0x11f/0x170 drivers/base/dd.c:537 __device_release_driver drivers/base/dd.c:1222 [inline] device_release_driver_internal+0x1a7/0x2f0 drivers/base/dd.c:1248 usb_driver_release_interface+0x102/0x180 drivers/usb/core/driver.c:627 usb_forced_unbind_intf+0x4d/0xa0 drivers/usb/core/driver.c:1118 usb_reset_device+0x39b/0x9a0 drivers/usb/core/hub.c:6114 This turned out not to be an error in usb-storage but rather a nested device reset attempt. That is, as the rtl8712 driver was being unbound from a composite device in preparation for an unrelated USB reset (that driver does not have pre_reset or post_reset callbacks), its ->remove routine called usb_reset_device() -- thus nesting one reset call within another. Performing a reset as part of disconnect processing is a questionable practice at best. However, the bug report points out that the USB core does not have any protection against nested resets. Adding a reset_in_progress flag and testing it will prevent such errors in the future. Link: https://lore.kernel.org/all/CAB7eexKUpvX-JNiLzhXBDWgfg2T9e9_0Tw4HQ6keN==voRbP0g@mail.gmail.com/ Cc: stable@vger.kernel.org Reported-and-tested-by: Rondreis <linhaoguo86@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/YwkflDxvg0KWqyZK@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30USB: gadget: Fix obscure lockdep violation for udc_mutexAlan Stern
A recent commit expanding the scope of the udc_lock mutex in the gadget core managed to cause an obscure and slightly bizarre lockdep violation. In abbreviated form: ====================================================== WARNING: possible circular locking dependency detected 5.19.0-rc7+ #12510 Not tainted ------------------------------------------------------ udevadm/312 is trying to acquire lock: ffff80000aae1058 (udc_lock){+.+.}-{3:3}, at: usb_udc_uevent+0x54/0xe0 but task is already holding lock: ffff000002277548 (kn->active#4){++++}-{0:0}, at: kernfs_seq_start+0x34/0xe0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (kn->active#4){++++}-{0:0}:        lock_acquire+0x68/0x84        __kernfs_remove+0x268/0x380        kernfs_remove_by_name_ns+0x58/0xac        sysfs_remove_file_ns+0x18/0x24        device_del+0x15c/0x440 -> #2 (device_links_lock){+.+.}-{3:3}:        lock_acquire+0x68/0x84        __mutex_lock+0x9c/0x430        mutex_lock_nested+0x38/0x64        device_link_remove+0x3c/0xa0        _regulator_put.part.0+0x168/0x190        regulator_put+0x3c/0x54        devm_regulator_release+0x14/0x20 -> #1 (regulator_list_mutex){+.+.}-{3:3}:        lock_acquire+0x68/0x84        __mutex_lock+0x9c/0x430        mutex_lock_nested+0x38/0x64        regulator_lock_dependent+0x54/0x284        regulator_enable+0x34/0x80        phy_power_on+0x24/0x130        __dwc2_lowlevel_hw_enable+0x100/0x130        dwc2_lowlevel_hw_enable+0x18/0x40        dwc2_hsotg_udc_start+0x6c/0x2f0        gadget_bind_driver+0x124/0x1f4 -> #0 (udc_lock){+.+.}-{3:3}:        __lock_acquire+0x1298/0x20cc        lock_acquire.part.0+0xe0/0x230        lock_acquire+0x68/0x84        __mutex_lock+0x9c/0x430        mutex_lock_nested+0x38/0x64        usb_udc_uevent+0x54/0xe0 Evidently this was caused by the scope of udc_mutex being too large. The mutex is only meant to protect udc->driver along with a few other things. As far as I can tell, there's no reason for the mutex to be held while the gadget core calls a gadget driver's ->bind or ->unbind routine, or while a UDC is being started or stopped. (This accounts for link #1 in the chain above, where the mutex is held while the dwc2_hsotg_udc is started as part of driver probing.) Gadget drivers' ->disconnect callbacks are problematic. Even though usb_gadget_disconnect() will now acquire the udc_mutex, there's a window in usb_gadget_bind_driver() between the times when the mutex is released and the ->bind callback is invoked. If a disconnect occurred during that window, we could call the driver's ->disconnect routine before its ->bind routine. To prevent this from happening, it will be necessary to prevent a UDC from connecting while it has no gadget driver. This should be done already but it doesn't seem to be; currently usb_gadget_connect() has no check for this. Such a check will have to be added later. Some degree of mutual exclusion is required in soft_connect_store(), which can dereference udc->driver at arbitrary times since it is a sysfs callback. The solution here is to acquire the gadget's device lock rather than the udc_mutex. Since the driver core guarantees that the device lock is always held during driver binding and unbinding, this will make the accesses in soft_connect_store() mutually exclusive with any changes to udc->driver. Lastly, it turns out there is one place which should hold the udc_mutex but currently does not: The function_show() routine needs protection while it dereferences udc->driver. The missing lock and unlock calls are added. Link: https://lore.kernel.org/all/b2ba4245-9917-e399-94c8-03a383e7070e@samsung.com/ Fixes: 2191c00855b0 ("USB: gadget: Fix use-after-free Read in usb_udc_uevent()") Cc: Felipe Balbi <balbi@kernel.org> Cc: stable@vger.kernel.org Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/YwkfhdxA/I2nOcK7@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30usb: dwc2: fix wrong order of phy_power_on and phy_initHeiner Kallweit
Since 1599069a62c6 ("phy: core: Warn when phy_power_on is called before phy_init") the driver complains. In my case (Amlogic SoC) the warning is: phy phy-fe03e000.phy.2: phy_power_on was called before phy_init So change the order of the two calls. The same change has to be done to the order of phy_exit() and phy_power_off(). Fixes: 09a75e857790 ("usb: dwc2: refactor common low-level hw code to platform.c") Cc: stable@vger.kernel.org Acked-by: Minas Harutyunyan <hminas@synopsys.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/dfcc6b40-2274-4e86-e73c-5c5e6aa3e046@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30usb: gadget: udc-xilinx: replace memcpy with memcpy_toioPiyush Mehta
For ARM processor, unaligned access to device memory is not allowed. Method memcpy does not take care of alignment. USB detection failure with the unaligned address of memory access, with below kernel crash. To fix the unaligned address the kernel panic issue, replace memcpy with memcpy_toio method. Kernel crash: Unable to handle kernel paging request at virtual address ffff80000c05008a Mem abort info: ESR = 0x96000061 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x21: alignment fault Data abort info: ISV = 0, ISS = 0x00000061 CM = 0, WnR = 1 swapper pgtable: 4k pages, 48-bit VAs, pgdp=000000000143b000 [ffff80000c05008a] pgd=100000087ffff003, p4d=100000087ffff003, pud=100000087fffe003, pmd=1000000800bcc003, pte=00680000a0010713 Internal error: Oops: 96000061 [#1] SMP Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.19-xilinx-v2022.1 #1 Hardware name: ZynqMP ZCU102 Rev1.0 (DT) pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __memcpy+0x30/0x260 lr : __xudc_ep0_queue+0xf0/0x110 sp : ffff800008003d00 x29: ffff800008003d00 x28: ffff800009474e80 x27: 00000000000000a0 x26: 0000000000000100 x25: 0000000000000012 x24: ffff000800bc8080 x23: 0000000000000001 x22: 0000000000000012 x21: ffff000800bc8080 x20: 0000000000000012 x19: ffff000800bc8080 x18: 0000000000000000 x17: ffff800876482000 x16: ffff800008004000 x15: 0000000000004000 x14: 00001f09785d0400 x13: 0103020101005567 x12: 0781400000000200 x11: 00000000c5672a10 x10: 00000000000008d0 x9 : ffff800009463cf0 x8 : ffff8000094757b0 x7 : 0201010055670781 x6 : 4000000002000112 x5 : ffff80000c05009a x4 : ffff000800a15012 x3 : ffff00080362ad80 x2 : 0000000000000012 x1 : ffff000800a15000 x0 : ffff80000c050088 Call trace: __memcpy+0x30/0x260 xudc_ep0_queue+0x3c/0x60 usb_ep_queue+0x38/0x44 composite_ep0_queue.constprop.0+0x2c/0xc0 composite_setup+0x8d0/0x185c configfs_composite_setup+0x74/0xb0 xudc_irq+0x570/0xa40 __handle_irq_event_percpu+0x58/0x170 handle_irq_event+0x60/0x120 handle_fasteoi_irq+0xc0/0x220 handle_domain_irq+0x60/0x90 gic_handle_irq+0x74/0xa0 call_on_irq_stack+0x2c/0x60 do_interrupt_handler+0x54/0x60 el1_interrupt+0x30/0x50 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x78/0x7c arch_cpu_idle+0x18/0x2c do_idle+0xdc/0x15c cpu_startup_entry+0x28/0x60 rest_init+0xc8/0xe0 arch_call_rest_init+0x10/0x1c start_kernel+0x694/0x6d4 __primary_switched+0xa4/0xac Fixes: 1f7c51660034 ("usb: gadget: Add xilinx usb2 device support") Cc: stable@vger.kernel.org Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Piyush Mehta <piyush.mehta@amd.com> Link: https://lore.kernel.org/r/20220824071253.1261096-1-piyush.mehta@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30usb: typec: Remove retimers properlyHeikki Krogerus
Retimer device class is left dangling when the typec module is unloaded. Attempts to reload the module failed with warning: "sysfs: cannot create duplicate filename '/class/retimer'" Fixing the issue by unregistering the class properly. Fixes: ddaf8d96f93b ("usb: typec: Add support for retimers") Reviewed-by: Prashant Malani <pmalani@chromium.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20220825140411.10743-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30usb: dwc3: disable USB core PHY managementJohan Hovold
The dwc3 driver manages its PHYs itself so the USB core PHY management needs to be disabled. Use the struct xhci_plat_priv hack added by commits 46034a999c07 ("usb: host: xhci-plat: add platform data support") and f768e718911e ("usb: host: xhci-plat: add priv quirk for skip PHY initialization") to propagate the setting for now. Fixes: 4e88d4c08301 ("usb: add a flag to skip PHY initialization to struct usb_hcd") Fixes: 178a0bce05cb ("usb: core: hcd: integrate the PHY wrapper into the HCD core") Tested-by: Matthias Kaehlcke <mka@chromium.org> Cc: stable <stable@kernel.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220825131836.19769-1-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30usb: add quirks for Lenovo OneLink+ DockJean-Francois Le Fillatre
The Lenovo OneLink+ Dock contains two VL812 USB3.0 controllers: 17ef:1018 upstream 17ef:1019 downstream Those two controllers both have problems with some USB3.0 devices, particularly self-powered ones. Typical error messages include: Timeout while waiting for setup device command device not accepting address X, error -62 unable to enumerate USB device By process of elimination the controllers themselves were identified as the cause of the problem. Through trial and error the issue was solved by using USB_QUIRK_RESET_RESUME for both chips. Signed-off-by: Jean-Francois Le Fillatre <jflf_kernel@gmx.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20220824191320.17883-1-jflf_kernel@gmx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30net/sched: fix netdevice reference leaks in attach_default_qdiscs()Wang Hai
In attach_default_qdiscs(), if a dev has multiple queues and queue 0 fails to attach qdisc because there is no memory in attach_one_default_qdisc(). Then dev->qdisc will be noop_qdisc by default. But the other queues may be able to successfully attach to default qdisc. In this case, the fallback to noqueue process will be triggered. If the original attached qdisc is not released and a new one is directly attached, this will cause netdevice reference leaks. The following is the bug log: veth0: default qdisc (fq_codel) fail, fallback to noqueue unregister_netdevice: waiting for veth0 to become free. Usage count = 32 leaked reference. qdisc_alloc+0x12e/0x210 qdisc_create_dflt+0x62/0x140 attach_one_default_qdisc.constprop.41+0x44/0x70 dev_activate+0x128/0x290 __dev_open+0x12a/0x190 __dev_change_flags+0x1a2/0x1f0 dev_change_flags+0x23/0x60 do_setlink+0x332/0x1150 __rtnl_newlink+0x52f/0x8e0 rtnl_newlink+0x43/0x70 rtnetlink_rcv_msg+0x140/0x3b0 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x1bb/0x290 netlink_sendmsg+0x37c/0x4e0 sock_sendmsg+0x5f/0x70 ____sys_sendmsg+0x208/0x280 Fix this bug by clearing any non-noop qdiscs that may have been assigned before trying to re-attach. Fixes: bf6dba76d278 ("net: sched: fallback to qdisc noqueue if default qdisc setup fail") Signed-off-by: Wang Hai <wanghai38@huawei.com> Link: https://lore.kernel.org/r/20220826090055.24424-1-wanghai38@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-30tty: n_gsm: avoid call of sleeping functions from atomic contextFedor Pchelkin
Syzkaller reports the following problem: BUG: sleeping function called from invalid context at kernel/printk/printk.c:2347 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 1105, name: syz-executor423 3 locks held by syz-executor423/1105: #0: ffff8881468b9098 (&tty->ldisc_sem){++++}-{0:0}, at: tty_ldisc_ref_wait+0x22/0x90 drivers/tty/tty_ldisc.c:266 #1: ffff8881468b9130 (&tty->atomic_write_lock){+.+.}-{3:3}, at: tty_write_lock drivers/tty/tty_io.c:952 [inline] #1: ffff8881468b9130 (&tty->atomic_write_lock){+.+.}-{3:3}, at: do_tty_write drivers/tty/tty_io.c:975 [inline] #1: ffff8881468b9130 (&tty->atomic_write_lock){+.+.}-{3:3}, at: file_tty_write.constprop.0+0x2a8/0x8e0 drivers/tty/tty_io.c:1118 #2: ffff88801b06c398 (&gsm->tx_lock){....}-{2:2}, at: gsmld_write+0x5e/0x150 drivers/tty/n_gsm.c:2717 irq event stamp: 3482 hardirqs last enabled at (3481): [<ffffffff81d13343>] __get_reqs_available+0x143/0x2f0 fs/aio.c:946 hardirqs last disabled at (3482): [<ffffffff87d39722>] __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline] hardirqs last disabled at (3482): [<ffffffff87d39722>] _raw_spin_lock_irqsave+0x52/0x60 kernel/locking/spinlock.c:159 softirqs last enabled at (3408): [<ffffffff87e01002>] asm_call_irq_on_stack+0x12/0x20 softirqs last disabled at (3401): [<ffffffff87e01002>] asm_call_irq_on_stack+0x12/0x20 Preemption disabled at: [<0000000000000000>] 0x0 CPU: 2 PID: 1105 Comm: syz-executor423 Not tainted 5.10.137-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x107/0x167 lib/dump_stack.c:118 ___might_sleep.cold+0x1e8/0x22e kernel/sched/core.c:7304 console_lock+0x19/0x80 kernel/printk/printk.c:2347 do_con_write+0x113/0x1de0 drivers/tty/vt/vt.c:2909 con_write+0x22/0xc0 drivers/tty/vt/vt.c:3296 gsmld_write+0xd0/0x150 drivers/tty/n_gsm.c:2720 do_tty_write drivers/tty/tty_io.c:1028 [inline] file_tty_write.constprop.0+0x502/0x8e0 drivers/tty/tty_io.c:1118 call_write_iter include/linux/fs.h:1903 [inline] aio_write+0x355/0x7b0 fs/aio.c:1580 __io_submit_one fs/aio.c:1952 [inline] io_submit_one+0xf45/0x1a90 fs/aio.c:1999 __do_sys_io_submit fs/aio.c:2058 [inline] __se_sys_io_submit fs/aio.c:2028 [inline] __x64_sys_io_submit+0x18c/0x2f0 fs/aio.c:2028 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x61/0xc6 The problem happens in the following control flow: gsmld_write(...) spin_lock_irqsave(&gsm->tx_lock, flags) // taken a spinlock on TX data con_write(...) do_con_write(...) console_lock() might_sleep() // -> bug As far as console_lock() might sleep it should not be called with spinlock held. The patch replaces tx_lock spinlock with mutex in order to avoid the problem. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 32dd59f96924 ("tty: n_gsm: fix race condition in gsmld_write()") Cc: stable <stable@kernel.org> Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Link: https://lore.kernel.org/r/20220829131640.69254-3-pchelkin@ispras.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30tty: n_gsm: replace kicktimer with delayed_workFedor Pchelkin
A kick_timer timer_list is replaced with kick_timeout delayed_work to be able to synchronize with mutexes as a prerequisite for the introduction of tx_mutex. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: c568f7086c6e ("tty: n_gsm: fix missing timer to handle stalled links") Cc: stable <stable@kernel.org> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Suggested-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Link: https://lore.kernel.org/r/20220829131640.69254-2-pchelkin@ispras.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30tty: n_gsm: initialize more members at gsm_alloc_mux()Tetsuo Handa
syzbot is reporting use of uninitialized spinlock at gsmld_write() [1], for commit 32dd59f96924f45e ("tty: n_gsm: fix race condition in gsmld_write()") allows accessing gsm->tx_lock before gsm_activate_mux() initializes it. Since object initialization should be done right after allocation in order to avoid accessing uninitialized memory, move initialization of timer/work/waitqueue/spinlock from gsmld_open()/gsm_activate_mux() to gsm_alloc_mux(). Link: https://syzkaller.appspot.com/bug?extid=cf155def4e717db68a12 [1] Fixes: 32dd59f96924f45e ("tty: n_gsm: fix race condition in gsmld_write()") Reported-by: syzbot <syzbot+cf155def4e717db68a12@syzkaller.appspotmail.com> Tested-by: syzbot <syzbot+cf155def4e717db68a12@syzkaller.appspotmail.com> Cc: stable <stable@kernel.org> Acked-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: https://lore.kernel.org/r/2110618e-57f0-c1ce-b2ad-b6cacef3f60e@I-love.SAKURA.ne.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30tty: n_gsm: add sanity check for gsm->receive in gsm_receive_buf()Mazin Al Haddad
A null pointer dereference can happen when attempting to access the "gsm->receive()" function in gsmld_receive_buf(). Currently, the code assumes that gsm->recieve is only called after MUX activation. Since the gsmld_receive_buf() function can be accessed without the need to initialize the MUX, the gsm->receive() function will not be set and a NULL pointer dereference will occur. Fix this by avoiding the call to "gsm->receive()" in case the function is not initialized by adding a sanity check. Call Trace: <TASK> gsmld_receive_buf+0x1c2/0x2f0 drivers/tty/n_gsm.c:2861 tiocsti drivers/tty/tty_io.c:2293 [inline] tty_ioctl+0xa75/0x15d0 drivers/tty/tty_io.c:2692 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Link: https://syzkaller.appspot.com/bug?id=bdf035c61447f8c6e0e6920315d577cb5cc35ac5 Fixes: 01aecd917114 ("tty: n_gsm: fix tty registration before control channel open") Cc: stable <stable@kernel.org> Reported-and-tested-by: syzbot+e3563f0c94e188366dbb@syzkaller.appspotmail.com Signed-off-by: Mazin Al Haddad <mazinalhaddad05@gmail.com> Link: https://lore.kernel.org/r/20220814015211.84180-1-mazinalhaddad05@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30tty: serial: atmel: Preserve previous USART mode if RS485 disabledSergiu Moga
Whenever the atmel_rs485_config() driver method would be called, the USART mode is reset to normal mode before even checking if RS485 flag is set, thus resulting in losing the previous USART mode in the case where the checking fails. Some tools, such as `linux-serial-test`, lead to the driver calling this method when doing the setup of the serial port: after setting the port mode (Hardware Flow Control, Normal Mode, RS485 Mode, etc.), `linux-serial-test` tries to enable/disable RS485 depending on the commandline arguments that were passed. Example of how this issue could reveal itself: When doing a serial communication with Hardware Flow Control through `linux-serial-test`, the tool would lead to the driver roughly doing the following: - set the corresponding bit to 1 (ATMEL_US_USMODE_HWHS bit in the ATMEL_US_MR register) through the atmel_set_termios() to enable Hardware Flow Control - disable RS485 through the atmel_config_rs485() method Thus, when the latter is called, the mode will be reset and the previously set bit is unset, leaving USART in normal mode instead of the expected Hardware Flow Control mode. This fix ensures that this reset is only done if the checking for RS485 succeeds and that the previous mode is preserved otherwise. Fixes: e8faff7330a35 ("ARM: 6092/1: atmel_serial: support for RS485 communications") Cc: stable <stable@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com> Link: https://lore.kernel.org/r/20220824142902.502596-1-sergiu.moga@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30tty: serial: lpuart: disable flow control while waiting for the transmit ↵Sherry Sun
engine to complete When the user initializes the uart port, and waits for the transmit engine to complete in lpuart32_set_termios(), if the UART TX fifo has dirty data and the UARTMODIR enable the flow control, the TX fifo may never be empty. So here we should disable the flow control first to make sure the transmit engin can complete. Fixes: 380c966c093e ("tty: serial: fsl_lpuart: add 32-bit register interface support") Cc: stable <stable@kernel.org> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20220821101527.10066-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-07-16 03:06:25 +0000