summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-08-23bnxt_en: fix NQ resource accounting during vf creation on 57500 chipsVikas Gupta
There are 2 issues: 1. We should decrement hw_resc->max_nqs instead of hw_resc->max_irqs with the number of NQs assigned to the VFs. The IRQs are fixed on each function and cannot be re-assigned. Only the NQs are being assigned to the VFs. 2. vf_msix is the total number of NQs to be assigned to the VFs. So we should decrement vf_msix from hw_resc->max_nqs. Fixes: b16b68918674 ("bnxt_en: Add SR-IOV support for 57500 chips.") Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23bnxt_en: set missing reload flag in devlink featuresVikas Gupta
Add missing devlink_set_features() API for callbacks reload_down and reload_up to function. Fixes: 228ea8c187d8 ("bnxt_en: implement devlink dev reload driver_reinit") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23bnxt_en: Use PAGE_SIZE to init buffer when multi buffer XDP is not in usePavan Chebbi
Using BNXT_PAGE_MODE_BUF_SIZE + offset as buffer length value is not sufficient when running single buffer XDP programs doing redirect operations. The stack will complain on missing skb tail room. Fix it by using PAGE_SIZE when calling xdp_init_buff() for single buffer programs. Fixes: b231c3f3414c ("bnxt: refactor bnxt_rx_xdp to separate xdp_init_buff/xdp_prepare_buff") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23net: dsa: microchip: make learning configurable and keep it off while standaloneVladimir Oltean
Address learning should initially be turned off by the driver for port operation in standalone mode, then the DSA core handles changes to it via ds->ops->port_bridge_flags(). Leaving address learning enabled while ports are standalone breaks any kind of communication which involves port B receiving what port A has sent. Notably it breaks the ksz9477 driver used with a (non offloaded, ports act as if standalone) bonding interface in active-backup mode, when the ports are connected together through external switches, for redundancy purposes. This fixes a major design flaw in the ksz9477 and ksz8795 drivers, which unconditionally leave address learning enabled even while ports operate as standalone. Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477") Link: https://lore.kernel.org/netdev/CAFZh4h-JVWt80CrQWkFji7tZJahMfOToUJQgKS5s0_=9zzpvYQ@mail.gmail.com/ Reported-by: Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220818164809.3198039-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23riscv: dts: microchip: mpfs: remove pci axi address translation propertyConor Dooley
An AXI master address translation table property was inadvertently added to the device tree & this was not caught by dtbs_check at the time. Remove the property - it should not be in mpfs.dtsi anyway as it would be more suitable in -fabric.dtsi nor does it actually apply to the version of the reference design we are using for upstream. Link: https://www.microsemi.com/document-portal/doc_download/1245812-polarfire-fpga-and-polarfire-soc-fpga-pci-express-user-guide # Section 1.3.3 Fixes: 528a5b1f2556 ("riscv: dts: microchip: add new peripherals to icicle kit device tree") Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2022-08-23riscv: dts: microchip: mpfs: remove bogus card-detect-delayConor Dooley
Recent versions of dt-schema warn about a previously undetected undocumented property: arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dtb: mmc@20008000: Unevaluated properties are not allowed ('card-detect-delay' was unexpected) From schema: Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml There are no GPIOs connected to MSSIO6B4 pin K3 so adding the common cd-debounce-delay-ms property makes no sense. The Cadence IP has a register that sets the card detect delay as "DP * tclk". On MPFS, this clock frequency is not configurable (it must be 200 MHz) & the FPGA comes out of reset with this register already set. Fixes: bc47b2217f24 ("riscv: dts: microchip: add the sundance polarberry") Fixes: 0fa6107eca41 ("RISC-V: Initial DTS for Microchip ICICLE board") Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2022-08-23riscv: dts: microchip: mpfs: remove ti,fifo-depth propertyConor Dooley
Recent versions of dt-schema warn about a previously undetected undocument property on the icicle & polarberry devicetrees: arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dtb: ethernet@20112000: ethernet-phy@8: Unevaluated properties are not allowed ('ti,fifo-depth' was unexpected) From schema: Documentation/devicetree/bindings/net/cdns,macb.yaml I know what you're thinking, the binding doesn't look to be the problem and I agree. I am not sure why a TI vendor property was ever actually added since it has no meaning... just get rid of it. Fixes: bc47b2217f24 ("riscv: dts: microchip: add the sundance polarberry") Fixes: 0fa6107eca41 ("RISC-V: Initial DTS for Microchip ICICLE board") Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2022-08-23riscv: dts: microchip: mpfs: fix incorrect pcie child node nameConor Dooley
Recent versions of dt-schema complain about the PCIe controller's child node name: arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dtb: pcie@2000000000: Unevaluated properties are not allowed ('clock-names', 'clocks', 'legacy-interrupt-controller', 'microchip,axi-m-atr0' were unexpected) From schema: Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml Make the dts match the correct property name in the dts. Fixes: 528a5b1f2556 ("riscv: dts: microchip: add new peripherals to icicle kit device tree") Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2022-08-23Merge tag 'parisc-for-6.0-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "Some interesting background to the current patchset: It turned out that the fldw instruction (which loads a 32-bit word from memory into one half of a FP register) failed on unaligned addresses and even trashed some other random FP register instead. It's a trivial one-liner fix in the exception handler but this failure dates back to the very beginnings of the parisc-port. It's strange that it was never noticed before. Another patch fixes an annoyance noticed by Randy Dunlap. Running "make ARCH=parisc64 randconfig" always returned a 32-bit config, although one would expect a 64-bit config. Masahiro Yamada suggested to mimik sparc Kconfig code, which fixed the issue nicely. This allowed to drop some compiler build checks too. Third, it's possible to build an optimized 32-bit kernel for PA8X00 (64-bit) CPUs, which then wouldn't start on 32-bit-only (PA1.x) machines. I've added a bootup check which prevents that and which prints a message to the console. This can be tested with qemu, which currently only supports 32-bit emulation. The other patches are usual clean-up stuff like added return value checks and typo fixes in comments. Summary: - Fix emulation of fldw instruction on unaligned addresses - Fix "make ARCH=parisc64 randconfig" to return a 64-bit config - Prevent boot if trying to boot a 32-bit kernel compiled for PA8X00 CPUs on 32-bit only machines - ccio-dma: Handle kmalloc failure in ccio_init_resources()" * tag 'parisc-for-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Add runtime check to prevent PA2.0 kernels on PA1.x machines parisc: ccio-dma: Handle kmalloc failure in ccio_init_resources() parisc: led: Move from strlcpy with unused retval to strscpy parisc: ccio-dma: Fix typo in comment Revert "parisc: Show error if wrong 32/64-bit compiler is being used" parisc: Make CONFIG_64BIT available for ARCH=parisc64 only parisc: Fix exception handler for fldw and fstw instructions
2022-08-23Merge tag 'mm-hotfixes-stable-2022-08-22' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "Thirteen fixes, almost all for MM. Seven of these are cc:stable and the remainder fix up the changes which went into this -rc cycle" * tag 'mm-hotfixes-stable-2022-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: kprobes: don't call disarm_kprobe() for disabled kprobes mm/shmem: shmem_replace_page() remember NR_SHMEM mm/shmem: tmpfs fallocate use file_modified() mm/shmem: fix chattr fsflags support in tmpfs mm/hugetlb: support write-faults in shared mappings mm/hugetlb: fix hugetlb not supporting softdirty tracking mm/uffd: reset write protection when unregister with wp-mode mm/smaps: don't access young/dirty bit if pte unpresent mm: add DEVICE_ZONE to FOR_ALL_ZONES kernel/sys_ni: add compat entry for fadvise64_64 mm/gup: fix FOLL_FORCE COW security issue and remove FOLL_COW Revert "zram: remove double compression logic" get_maintainer: add Alan to .get_maintainer.ignore
2022-08-23Merge tag 'linux-kselftest-kunit-fixes-6.0-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit fixes from Shuah Khan: "Fix for a mmc test and to load .kunit_test_suites section when CONFIG_KUNIT=m, and not just when KUnit is built-in" * tag 'linux-kselftest-kunit-fixes-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: module: kunit: Load .kunit_test_suites section when CONFIG_KUNIT=m mmc: sdhci-of-aspeed: test: Fix dependencies when KUNIT=m
2022-08-23btrfs: add info when mount fails due to stale replace targetAnand Jain
If the replace target device reappears after the suspended replace is cancelled, it blocks the mount operation as it can't find the matching replace-item in the metadata. As shown below, BTRFS error (device sda5): replace devid present without an active replace item To overcome this situation, the user can run the command btrfs device scan --forget <replace target device> and try the mount command again. And also, to avoid repeating the issue, superblock on the devid=0 must be wiped. wipefs -a device-path-to-devid=0. This patch adds some info when this situation occurs. Reported-by: Samuel Greiner <samuel@balkonien.org> Link: https://lore.kernel.org/linux-btrfs/b4f62b10-b295-26ea-71f9-9a5c9299d42c@balkonien.org/T/ CC: stable@vger.kernel.org # 5.0+ Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-08-23btrfs: replace: drop assert for suspended replaceAnand Jain
If the filesystem mounts with the replace-operation in a suspended state and try to cancel the suspended replace-operation, we hit the assert. The assert came from the commit fe97e2e173af ("btrfs: dev-replace: replace's scrub must not be running in suspended state") that was actually not required. So just remove it. $ mount /dev/sda5 /btrfs BTRFS info (device sda5): cannot continue dev_replace, tgtdev is missing BTRFS info (device sda5): you may cancel the operation after 'mount -o degraded' $ mount -o degraded /dev/sda5 /btrfs <-- success. $ btrfs replace cancel /btrfs kernel: assertion failed: ret != -ENOTCONN, in fs/btrfs/dev-replace.c:1131 kernel: ------------[ cut here ]------------ kernel: kernel BUG at fs/btrfs/ctree.h:3750! After the patch: $ btrfs replace cancel /btrfs BTRFS info (device sda5): suspended dev_replace from /dev/sda5 (devid 1) to <missing disk> canceled Fixes: fe97e2e173af ("btrfs: dev-replace: replace's scrub must not be running in suspended state") CC: stable@vger.kernel.org # 5.0+ Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-08-23btrfs: fix silent failure when deleting root referenceFilipe Manana
At btrfs_del_root_ref(), if btrfs_search_slot() returns an error, we end up returning from the function with a value of 0 (success). This happens because the function returns the value stored in the variable 'err', which is 0, while the error value we got from btrfs_search_slot() is stored in the 'ret' variable. So fix it by setting 'err' with the error value. Fixes: 8289ed9f93bef2 ("btrfs: replace the BUG_ON in btrfs_del_root_ref with proper error handling") CC: stable@vger.kernel.org # 5.16+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-08-23btrfs: fix space cache corruption and potential double allocationsOmar Sandoval
When testing space_cache v2 on a large set of machines, we encountered a few symptoms: 1. "unable to add free space :-17" (EEXIST) errors. 2. Missing free space info items, sometimes caught with a "missing free space info for X" error. 3. Double-accounted space: ranges that were allocated in the extent tree and also marked as free in the free space tree, ranges that were marked as allocated twice in the extent tree, or ranges that were marked as free twice in the free space tree. If the latter made it onto disk, the next reboot would hit the BUG_ON() in add_new_free_space(). 4. On some hosts with no on-disk corruption or error messages, the in-memory space cache (dumped with drgn) disagreed with the free space tree. All of these symptoms have the same underlying cause: a race between caching the free space for a block group and returning free space to the in-memory space cache for pinned extents causes us to double-add a free range to the space cache. This race exists when free space is cached from the free space tree (space_cache=v2) or the extent tree (nospace_cache, or space_cache=v1 if the cache needs to be regenerated). struct btrfs_block_group::last_byte_to_unpin and struct btrfs_block_group::progress are supposed to protect against this race, but commit d0c2f4fa555e ("btrfs: make concurrent fsyncs wait less when waiting for a transaction commit") subtly broke this by allowing multiple transactions to be unpinning extents at the same time. Specifically, the race is as follows: 1. An extent is deleted from an uncached block group in transaction A. 2. btrfs_commit_transaction() is called for transaction A. 3. btrfs_run_delayed_refs() -> __btrfs_free_extent() runs the delayed ref for the deleted extent. 4. __btrfs_free_extent() -> do_free_extent_accounting() -> add_to_free_space_tree() adds the deleted extent back to the free space tree. 5. do_free_extent_accounting() -> btrfs_update_block_group() -> btrfs_cache_block_group() queues up the block group to get cached. block_group->progress is set to block_group->start. 6. btrfs_commit_transaction() for transaction A calls switch_commit_roots(). It sets block_group->last_byte_to_unpin to block_group->progress, which is block_group->start because the block group hasn't been cached yet. 7. The caching thread gets to our block group. Since the commit roots were already switched, load_free_space_tree() sees the deleted extent as free and adds it to the space cache. It finishes caching and sets block_group->progress to U64_MAX. 8. btrfs_commit_transaction() advances transaction A to TRANS_STATE_SUPER_COMMITTED. 9. fsync calls btrfs_commit_transaction() for transaction B. Since transaction A is already in TRANS_STATE_SUPER_COMMITTED and the commit is for fsync, it advances. 10. btrfs_commit_transaction() for transaction B calls switch_commit_roots(). This time, the block group has already been cached, so it sets block_group->last_byte_to_unpin to U64_MAX. 11. btrfs_commit_transaction() for transaction A calls btrfs_finish_extent_commit(), which calls unpin_extent_range() for the deleted extent. It sees last_byte_to_unpin set to U64_MAX (by transaction B!), so it adds the deleted extent to the space cache again! This explains all of our symptoms above: * If the sequence of events is exactly as described above, when the free space is re-added in step 11, it will fail with EEXIST. * If another thread reallocates the deleted extent in between steps 7 and 11, then step 11 will silently re-add that space to the space cache as free even though it is actually allocated. Then, if that space is allocated *again*, the free space tree will be corrupted (namely, the wrong item will be deleted). * If we don't catch this free space tree corruption, it will continue to get worse as extents are deleted and reallocated. The v1 space_cache is synchronously loaded when an extent is deleted (btrfs_update_block_group() with alloc=0 calls btrfs_cache_block_group() with load_cache_only=1), so it is not normally affected by this bug. However, as noted above, if we fail to load the space cache, we will fall back to caching from the extent tree and may hit this bug. The easiest fix for this race is to also make caching from the free space tree or extent tree synchronous. Josef tested this and found no performance regressions. A few extra changes fall out of this change. Namely, this fix does the following, with step 2 being the crucial fix: 1. Factor btrfs_caching_ctl_wait_done() out of btrfs_wait_block_group_cache_done() to allow waiting on a caching_ctl that we already hold a reference to. 2. Change the call in btrfs_cache_block_group() of btrfs_wait_space_cache_v1_finished() to btrfs_caching_ctl_wait_done(), which makes us wait regardless of the space_cache option. 3. Delete the now unused btrfs_wait_space_cache_v1_finished() and space_cache_v1_done(). 4. Change btrfs_cache_block_group()'s `int load_cache_only` parameter to `bool wait` to more accurately describe its new meaning. 5. Change a few callers which had a separate call to btrfs_wait_block_group_cache_done() to use wait = true instead. 6. Make btrfs_wait_block_group_cache_done() static now that it's not used outside of block-group.c anymore. Fixes: d0c2f4fa555e ("btrfs: make concurrent fsyncs wait less when waiting for a transaction commit") CC: stable@vger.kernel.org # 5.12+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-08-23Merge tag 'linux-kselftest-fixes-6.0-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: "Fixes to vm and sgx test builds" * tag 'linux-kselftest-fixes-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/vm: fix inability to build any vm tests selftests/sgx: Ignore OpenSSL 3.0 deprecated functions warning
2022-08-23netfilter: nft_tproxy: restrict to prerouting hookFlorian Westphal
TPROXY is only allowed from prerouting, but nft_tproxy doesn't check this. This fixes a crash (null dereference) when using tproxy from e.g. output. Fixes: 4ed8eb6570a4 ("netfilter: nf_tables: Add native tproxy support") Reported-by: Shell Chen <xierch@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de>
2022-08-23cgroup: Fix race condition at rebind_subsystems()Jing-Ting Wu
Root cause: The rebind_subsystems() is no lock held when move css object from A list to B list,then let B's head be treated as css node at list_for_each_entry_rcu(). Solution: Add grace period before invalidating the removed rstat_css_node. Reported-by: Jing-Ting Wu <jing-ting.wu@mediatek.com> Suggested-by: Michal Koutný <mkoutny@suse.com> Signed-off-by: Jing-Ting Wu <jing-ting.wu@mediatek.com> Tested-by: Jing-Ting Wu <jing-ting.wu@mediatek.com> Link: https://lore.kernel.org/linux-arm-kernel/d8f0bc5e2fb6ed259f9334c83279b4c011283c41.camel@mediatek.com/T/ Acked-by: Mukesh Ojha <quic_mojha@quicinc.com> Fixes: a7df69b81aac ("cgroup: rstat: support cgroup1") Cc: stable@vger.kernel.org # v5.13+ Signed-off-by: Tejun Heo <tj@kernel.org>
2022-08-23cpufreq: check only freq_table in __resolve_freq()Lukasz Luba
There is no need to check if the cpufreq driver implements callback cpufreq_driver::target_index. The logic in the __resolve_freq uses the frequency table available in the policy. It doesn't matter if the driver provides 'target_index' or 'target' callback. It just has to populate the 'policy->freq_table'. Thus, check only frequency table during the frequency resolving call. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-08-23x86/cpu: Add new Raptor Lake CPU model numberTony Luck
Note1: Model 0xB7 already claimed the "no suffix" #define for a regular client part, so add (yet another) suffix "S" to distinguish this new part from the earlier one. Note2: the RAPTORLAKE* and ALDERLAKE* processors are very similar from a software enabling point of view. There are no known features that have model-specific enabling and also differ between the two. In other words, every single place that list *one* or more RAPTORLAKE* or ALDERLAKE* processors should list all of them. Note3: This is being merged before there is an in-tree user. Merging this provides an "anchor" so that the different folks can update their subsystems (like perf) in parallel to use this define and test it. [ dhansen: add a note about why this has no in-tree users yet ] Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lkml.kernel.org/r/20220823174819.223941-1-tony.luck@intel.com
2022-08-23thermal/int340x_thermal: handle data_vault when the value is ZERO_SIZE_PTRLee, Chun-Yi
In some case, the GDDV returns a package with a buffer which has zero length. It causes that kmemdup() returns ZERO_SIZE_PTR (0x10). Then the data_vault_read() got NULL point dereference problem when accessing the 0x10 value in data_vault. [ 71.024560] BUG: kernel NULL pointer dereference, address: 0000000000000010 This patch uses ZERO_OR_NULL_PTR() for checking ZERO_SIZE_PTR or NULL value in data_vault. Signed-off-by: "Lee, Chun-Yi" <jlee@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-08-23netfilter: conntrack: work around exceeded receive windowFlorian Westphal
When a TCP sends more bytes than allowed by the receive window, all future packets can be marked as invalid. This can clog up the conntrack table because of 5-day default timeout. Sequence of packets: 01 initiator > responder: [S], seq 171, win 5840, options [mss 1330,sackOK,TS val 63 ecr 0,nop,wscale 1] 02 responder > initiator: [S.], seq 33211, ack 172, win 65535, options [mss 1460,sackOK,TS val 010 ecr 63,nop,wscale 8] 03 initiator > responder: [.], ack 33212, win 2920, options [nop,nop,TS val 068 ecr 010], length 0 04 initiator > responder: [P.], seq 172:240, ack 33212, win 2920, options [nop,nop,TS val 279 ecr 010], length 68 Window is 5840 starting from 33212 -> 39052. 05 responder > initiator: [.], ack 240, win 256, options [nop,nop,TS val 872 ecr 279], length 0 06 responder > initiator: [.], seq 33212:34530, ack 240, win 256, options [nop,nop,TS val 892 ecr 279], length 1318 This is fine, conntrack will flag the connection as having outstanding data (UNACKED), which lowers the conntrack timeout to 300s. 07 responder > initiator: [.], seq 34530:35848, ack 240, win 256, options [nop,nop,TS val 892 ecr 279], length 1318 08 responder > initiator: [.], seq 35848:37166, ack 240, win 256, options [nop,nop,TS val 892 ecr 279], length 1318 09 responder > initiator: [.], seq 37166:38484, ack 240, win 256, options [nop,nop,TS val 892 ecr 279], length 1318 10 responder > initiator: [.], seq 38484:39802, ack 240, win 256, options [nop,nop,TS val 892 ecr 279], length 1318 Packet 10 is already sending more than permitted, but conntrack doesn't validate this (only seq is tested vs. maxend, not 'seq+len'). 38484 is acceptable, but only up to 39052, so this packet should not have been sent (or only 568 bytes, not 1318). At this point, connection is still in '300s' mode. Next packet however will get flagged: 11 responder > initiator: [P.], seq 39802:40128, ack 240, win 256, options [nop,nop,TS val 892 ecr 279], length 326 nf_ct_proto_6: SEQ is over the upper bound (over the window of the receiver) .. LEN=378 .. SEQ=39802 ACK=240 ACK PSH .. Now, a couple of replies/acks comes in: 12 initiator > responder: [.], ack 34530, win 4368, [.. irrelevant acks removed ] 16 initiator > responder: [.], ack 39802, win 8712, options [nop,nop,TS val 296201291 ecr 2982371892], length 0 This ack is significant -- this acks the last packet send by the responder that conntrack considered valid. This means that ack == td_end. This will withdraw the 'unacked data' flag, the connection moves back to the 5-day timeout of established conntracks. 17 initiator > responder: ack 40128, win 10030, ... This packet is also flagged as invalid. Because conntrack only updates state based on packets that are considered valid, packet 11 'did not exist' and that gets us: nf_ct_proto_6: ACK is over upper bound 39803 (ACKed data not seen yet) .. SEQ=240 ACK=40128 WINDOW=10030 RES=0x00 ACK URG Because this received and processed by the endpoints, the conntrack entry remains in a bad state, no packets will ever be considered valid again: 30 responder > initiator: [F.], seq 40432, ack 2045, win 391, .. 31 initiator > responder: [.], ack 40433, win 11348, .. 32 initiator > responder: [F.], seq 2045, ack 40433, win 11348 .. ... all trigger 'ACK is over bound' test and we end up with non-early-evictable 5-day default timeout. NB: This patch triggers a bunch of checkpatch warnings because of silly indent. I will resend the cleanup series linked below to reduce the indent level once this change has propagated to net-next. I could route the cleanup via nf but that causes extra backport work for stable maintainers. Link: https://lore.kernel.org/netfilter-devel/20220720175228.17880-1-fw@strlen.de/T/#mb1d7147d36294573cc4f81d00f9f8dadfdd06cd8 Signed-off-by: Florian Westphal <fw@strlen.de>
2022-08-23netfilter: ebtables: reject blobs that don't provide all entry pointsFlorian Westphal
Harshit Mogalapalli says: In ebt_do_table() function dereferencing 'private->hook_entry[hook]' can lead to NULL pointer dereference. [..] Kernel panic: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] [..] RIP: 0010:ebt_do_table+0x1dc/0x1ce0 Code: 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 5c 16 00 00 48 b8 00 00 00 00 00 fc ff df 49 8b 6c df 08 48 8d 7d 2c 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 88 [..] Call Trace: nf_hook_slow+0xb1/0x170 __br_forward+0x289/0x730 maybe_deliver+0x24b/0x380 br_flood+0xc6/0x390 br_dev_xmit+0xa2e/0x12c0 For some reason ebtables rejects blobs that provide entry points that are not supported by the table, but what it should instead reject is the opposite: blobs that DO NOT provide an entry point supported by the table. t->valid_hooks is the bitmask of hooks (input, forward ...) that will see packets. Providing an entry point that is not support is harmless (never called/used), but the inverse isn't: it results in a crash because the ebtables traverser doesn't expect a NULL blob for a location its receiving packets for. Instead of fixing all the individual checks, do what iptables is doing and reject all blobs that differ from the expected hooks. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Florian Westphal <fw@strlen.de>
2022-08-23ACPI: processor: Remove freq Qos request for all CPUsRiwen Lu
The freq Qos request would be removed repeatedly if the cpufreq policy relates to more than one CPU. Then, it would cause the "called for unknown object" warning. Remove the freq Qos request for each CPU relates to the cpufreq policy, instead of removing repeatedly for the last CPU of it. Fixes: a1bb46c36ce3 ("ACPI: processor: Add QoS requests for all CPUs") Reported-by: Jeremy Linton <Jeremy.Linton@arm.com> Tested-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Riwen Lu <luriwen@kylinos.cn> Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-08-23nouveau: explicitly wait on the fence in nouveau_bo_move_m2mfKarol Herbst
It is a bit unlcear to us why that's helping, but it does and unbreaks suspend/resume on a lot of GPUs without any known drawbacks. Cc: stable@vger.kernel.org # v5.15+ Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/156 Signed-off-by: Karol Herbst <kherbst@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220819200928.401416-1-kherbst@redhat.com
2022-08-23io_uring: fix submission-failure handling for uring-cmdKanchan Joshi
If ->uring_cmd returned an error value different from -EAGAIN or -EIOCBQUEUED, it gets overridden with IOU_OK. This invites trouble as caller (io_uring core code) handles IOU_OK differently than other error codes. Fix this by returning the actual error code. Signed-off-by: Kanchan Joshi <joshi.k@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-23net: dsa: don't dereference NULL extack in dsa_slave_changeupper()Vladimir Oltean
When a driver returns -EOPNOTSUPP in dsa_port_bridge_join() but failed to provide a reason for it, DSA attempts to set the extack to say that software fallback will kick in. The problem is, when we use brctl and the legacy bridge ioctls, the extack will be NULL, and DSA dereferences it in the process of setting it. Sergei Antonov proves this using the following stack trace: Unable to handle kernel NULL pointer dereference at virtual address 00000000 PC is at dsa_slave_changeupper+0x5c/0x158 dsa_slave_changeupper from raw_notifier_call_chain+0x38/0x6c raw_notifier_call_chain from __netdev_upper_dev_link+0x198/0x3b4 __netdev_upper_dev_link from netdev_master_upper_dev_link+0x50/0x78 netdev_master_upper_dev_link from br_add_if+0x430/0x7f4 br_add_if from br_ioctl_stub+0x170/0x530 br_ioctl_stub from br_ioctl_call+0x54/0x7c br_ioctl_call from dev_ifsioc+0x4e0/0x6bc dev_ifsioc from dev_ioctl+0x2f8/0x758 dev_ioctl from sock_ioctl+0x5f0/0x674 sock_ioctl from sys_ioctl+0x518/0xe40 sys_ioctl from ret_fast_syscall+0x0/0x1c Fix the problem by only overriding the extack if non-NULL. Fixes: 1c6e8088d9a7 ("net: dsa: allow port_bridge_join() to override extack message") Link: https://lore.kernel.org/netdev/CABikg9wx7vB5eRDAYtvAm7fprJ09Ta27a4ZazC=NX5K4wn6pWA@mail.gmail.com/ Reported-by: Sergei Antonov <saproj@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Sergei Antonov <saproj@gmail.com> Link: https://lore.kernel.org/r/20220819173925.3581871-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23net: ipvtap - add __init/__exit annotations to module init/exit funcsMaciej Żenczykowski
Looks to have been left out in an oversight. Cc: Mahesh Bandewar <maheshb@google.com> Cc: Sainath Grandhi <sainath.grandhi@intel.com> Fixes: 235a9d89da97 ('ipvtap: IP-VLAN based tap driver') Signed-off-by: Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20220821130808.12143-1-zenczykowski@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-23io_uring: fix off-by-one in sync cancelation file checkJens Axboe
The passed in index should be validated against the number of registered files we have, it needs to be smaller than the index value to avoid going one beyond the end. Fixes: 78a861b94959 ("io_uring: add sync cancelation API through io_uring_register()") Reported-by: Luo Likang <luolikang@nsfocus.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-23io_uring: uapi: Add `extern "C"` in io_uring.h for liburingAmmar Faizi
Make it easy for liburing to integrate uapi header with the kernel. Previously, when this header changes, the liburing side can't directly copy this header file due to some small differences. Sync them. Link: https://lore.kernel.org/io-uring/f1feef16-6ea2-0653-238f-4aaee35060b6@kernel.dk Cc: Bart Van Assche <bvanassche@acm.org> Cc: Dylan Yudaken <dylany@fb.com> Cc: Facebook Kernel Team <kernel-team@fb.com> Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-23MAINTAINERS: Add `include/linux/io_uring_types.h`Ammar Faizi
File include/linux/io_uring_types.h doesn't have a maintainer, add it to the io_uring section. Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-23arm64/sme: Don't flush SVE register state when handling SME trapsMark Brown
Currently as part of handling a SME access trap we flush the SVE register state. This is not needed and would corrupt register state if the task has access to the SVE registers already. For non-streaming mode accesses the required flushing will be done in the SVE access trap. For streaming mode SVE register accesses the architecture guarantees that the register state will be flushed when streaming mode is entered or exited so there is no need for us to do so. Simply remove the register initialisation. Fixes: 8bd7f91c03d8 ("arm64/sme: Implement traps and syscall handling for SME") Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20220817182324.638214-5-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2022-08-23arm64/sme: Don't flush SVE register state when allocating SME storageMark Brown
Currently when taking a SME access trap we allocate storage for the SVE register state in order to be able to handle storage of streaming mode SVE. Due to the original usage in a purely SVE context the SVE register state allocation this also flushes the register state for SVE if storage was already allocated but in the SME context this is not desirable. For a SME access trap to be taken the task must not be in streaming mode so either there already is SVE register state present for regular SVE mode which would be corrupted or the task does not have TIF_SVE and the flush is redundant. Fix this by adding a flag to sve_alloc() indicating if we are in a SVE context and need to flush the state. Freshly allocated storage is always zeroed either way. Fixes: 8bd7f91c03d8 ("arm64/sme: Implement traps and syscall handling for SME") Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20220817182324.638214-4-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2022-08-23arm64/signal: Flush FPSIMD register state when disabling streaming modeMark Brown
When handling a signal delivered to a context with streaming mode enabled we will disable streaming mode for the signal handler, when doing so we should also flush the saved FPSIMD register state like exiting streaming mode in the hardware would do so that if that state is reloaded we get the same behaviour. Without this we will reload whatever the last FPSIMD state that was saved for the task was. Fixes: 40a8e87bb328 ("arm64/sme: Disable ZA and streaming mode when handling signals") Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20220817182324.638214-3-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2022-08-23arm64/signal: Raise limit on stack framesMark Brown
The signal code has a limit of 64K on the size of a stack frame that it will generate, if this limit is exceeded then a process will be killed if it receives a signal. Unfortunately with the advent of SME this limit is too small - the maximum possible size of the ZA register alone is 64K. This is not an issue for practical systems at present but is easily seen using virtual platforms. Raise the limit to 256K, this is substantially more than could be used by any current architecture extension. Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20220817182324.638214-2-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2022-08-23arm64/cache: Fix cache_type_cwg() for register generationMark Brown
Ard noticed that since we converted CTR_EL0 to automatic generation we have been seeing errors on some systems handling the value of cache_type_cwg() such as CPU features: No Cache Writeback Granule information, assuming 128 This is because the manual definition of CTR_EL0_CWG_MASK was done without a shift while our convention is to define the mask after shifting. This means that the user in cache_type_cwg() was broken as it was written for the manually written shift then mask. Fix this by converting to use SYS_FIELD_GET(). The only other field where the _MASK for this register is used is IminLine which is at offset 0 so unaffected. Fixes: 9a3634d02301 ("arm64/sysreg: Convert CTR_EL0 to automatic generation") Reported-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220818213613.733091-4-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2022-08-23arm64/sysreg: Guard SYS_FIELD_ macros for asmMark Brown
The SYS_FIELD_ macros are not safe for assembly contexts, move them inside the guarded section. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220818213613.733091-3-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2022-08-23arm64/sysreg: Directly include bitfield.hMark Brown
The SYS_FIELD_ macros in sysreg.h use definitions from bitfield.h but there is no direct inclusion of it, add one to ensure that sysreg.h is directly usable. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220818213613.733091-2-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2022-08-23arm64: cacheinfo: Fix incorrect assignment of signed error value to unsigned ↵Sudeep Holla
fw_level Though acpi_find_last_cache_level() always returned signed value and the document states it will return any errors caused by lack of a PPTT table, it never returned negative values before. Commit 0c80f9e165f8 ("ACPI: PPTT: Leave the table mapped for the runtime usage") however changed it by returning -ENOENT if no PPTT was found. The value returned from acpi_find_last_cache_level() is then assigned to unsigned fw_level. It will result in the number of cache leaves calculated incorrectly as a huge value which will then cause the following warning from __alloc_pages as the order would be great than MAX_ORDER because of incorrect and huge cache leaves value. | WARNING: CPU: 0 PID: 1 at mm/page_alloc.c:5407 __alloc_pages+0x74/0x314 | Modules linked in: | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-10393-g7c2a8d3ac4c0 #73 | pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : __alloc_pages+0x74/0x314 | lr : alloc_pages+0xe8/0x318 | Call trace: | __alloc_pages+0x74/0x314 | alloc_pages+0xe8/0x318 | kmalloc_order_trace+0x68/0x1dc | __kmalloc+0x240/0x338 | detect_cache_attributes+0xe0/0x56c | update_siblings_masks+0x38/0x284 | store_cpu_topology+0x78/0x84 | smp_prepare_cpus+0x48/0x134 | kernel_init_freeable+0xc4/0x14c | kernel_init+0x2c/0x1b4 | ret_from_fork+0x10/0x20 Fix the same by changing fw_level to be signed integer and return the error from init_cache_level() early in case of error. Reported-and-Tested-by: Bruno Goncalves <bgoncalv@redhat.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20220808084640.3165368-1-sudeep.holla@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2022-08-23arm64: errata: add detection for AMEVCNTR01 incrementing incorrectlyIonela Voinescu
The AMU counter AMEVCNTR01 (constant counter) should increment at the same rate as the system counter. On affected Cortex-A510 cores, AMEVCNTR01 increments incorrectly giving a significantly higher output value. This results in inaccurate task scheduler utilization tracking and incorrect feedback on CPU frequency. Work around this problem by returning 0 when reading the affected counter in key locations that results in disabling all users of this counter from using it either for frequency invariance or as FFH reference counter. This effect is the same to firmware disabling affected counters. Details on how the two features are affected by this erratum: - AMU counters will not be used for frequency invariance for affected CPUs and CPUs in the same cpufreq policy. AMUs can still be used for frequency invariance for unaffected CPUs in the system. Although unlikely, if no alternative method can be found to support frequency invariance for affected CPUs (cpufreq based or solution based on platform counters) frequency invariance will be disabled. Please check the chapter on frequency invariance at Documentation/scheduler/sched-capacity.rst for details of its effect. - Given that FFH can be used to fetch either the core or constant counter values, restrictions are lifted regarding any of these counters returning a valid (!0) value. Therefore FFH is considered supported if there is a least one CPU that support AMUs, independent of any counters being disabled or affected by this erratum. Clarifying comments are now added to the cpc_ffh_supported(), cpu_read_constcnt() and cpu_read_corecnt() functions. The above is achieved through adding a new erratum: ARM64_ERRATUM_2457168. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: James Morse <james.morse@arm.com> Link: https://lore.kernel.org/r/20220819103050.24211-1-ionela.voinescu@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2022-08-23arm64: fix rodata=fullMark Rutland
On arm64, "rodata=full" has been suppored (but not documented) since commit: c55191e96caa9d78 ("arm64: mm: apply r/o permissions of VM areas to its linear alias as well") As it's necessary to determine the rodata configuration early during boot, arm64 has an early_param() handler for this, whereas init/main.c has a __setup() handler which is run later. Unfortunately, this split meant that since commit: f9a40b0890658330 ("init/main.c: return 1 from handled __setup() functions") ... passing "rodata=full" would result in a spurious warning from the __setup() handler (though RO permissions would be configured appropriately). Further, "rodata=full" has been broken since commit: 0d6ea3ac94ca77c5 ("lib/kstrtox.c: add "false"/"true" support to kstrtobool()") ... which caused strtobool() to parse "full" as false (in addition to many other values not documented for the "rodata=" kernel parameter. This patch fixes this breakage by: * Moving the core parameter parser to an __early_param(), such that it is available early. * Adding an (optional) arch hook which arm64 can use to parse "full". * Updating the documentation to mention that "full" is valid for arm64. * Having the core parameter parser handle "on" and "off" explicitly, such that any undocumented values (e.g. typos such as "ful") are reported as errors rather than being silently accepted. Note that __setup() and early_param() have opposite conventions for their return values, where __setup() uses 1 to indicate a parameter was handled and early_param() uses 0 to indicate a parameter was handled. Fixes: f9a40b089065 ("init/main.c: return 1 from handled __setup() functions") Fixes: 0d6ea3ac94ca ("lib/kstrtox.c: add "false"/"true" support to kstrtobool()") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Jagdish Gediya <jvgediya@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Will Deacon <will@kernel.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20220817154022.3974645-1-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2022-08-23arm64: Fix comment typoKuan-Ying Lee
Replace wrong 'FIQ EL1h' comment with 'FIQ EL1t'. Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com> Link: https://lore.kernel.org/r/20220721030531.21234-1-Kuan-Ying.Lee@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
2022-08-23docs/arm64: elf_hwcaps: unify newlines in HWCAP listsMartin Liška
Unify horizontal spacing (remove extra newlines) which are sensitive to visual presentation by Sphinx. Fixes: 5e64b862c482 ("arm64/sme: Basic enumeration support") Signed-off-by: Martin Liska <mliska@suse.cz> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/84e3d6cc-75cf-d6f3-9bb8-be02075aaf6d@suse.cz Signed-off-by: Will Deacon <will@kernel.org>
2022-08-23smb3: missing inode locks in punch holeDavid Howells
smb3 fallocate punch hole was not grabbing the inode or filemap_invalidate locks so could have race with pagemap reinstantiating the page. Cc: stable@vger.kernel.org Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-08-23smb3: missing inode locks in zero rangeDavid Howells
smb3 fallocate zero range was not grabbing the inode or filemap_invalidate locks so could have race with pagemap reinstantiating the page. Cc: stable@vger.kernel.org Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-08-22scsi: sd: Revert "Rework asynchronous resume support"Bart Van Assche
Although commit 88f1669019bd ("scsi: sd: Rework asynchronous resume support") eliminates a delay for some ATA disks after resume, it causes resume of ATA disks to fail on other setups. See also: * "Resume process hangs for 5-6 seconds starting sometime in 5.16" (https://bugzilla.kernel.org/show_bug.cgi?id=215880). * Geert's regression report (https://lore.kernel.org/linux-scsi/alpine.DEB.2.22.394.2207191125130.1006766@ramsan.of.borg/). This is what I understand about this issue: * During resume, ata_port_pm_resume() starts the SCSI error handler. This changes the SCSI host state into SHOST_RECOVERY and causes scsi_queue_rq() to return BLK_STS_RESOURCE. * sd_resume() calls sd_start_stop_device() for ATA devices. That function in turn calls sd_submit_start() which tries to submit a START STOP UNIT command. That command can only be submitted after the SCSI error handler has changed the SCSI host state back to SHOST_RUNNING. * The SCSI error handler runs on its own thread and calls schedule_work(&(ap->scsi_rescan_task)). That causes ata_scsi_dev_rescan() to be called from the context of a kernel workqueue. That call hangs in blk_mq_get_tag(). I'm not sure why - maybe because all available tags have been allocated by sd_submit_start() calls (this is a guess). Link: https://lore.kernel.org/r/20220816172638.538734-1-bvanassche@acm.org Fixes: 88f1669019bd ("scsi: sd: Rework asynchronous resume support") Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: gzhqyz@gmail.com Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: gzhqyz@gmail.com Reported-and-tested-by: Vlastimil Babka <vbabka@suse.cz> Tested-by: John Garry <john.garry@huawei.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22Merge branch 'bonding-802-3ad-fix-no-transmission-of-lacpdus'Jakub Kicinski
Jonathan Toppins says: ==================== bonding: 802.3ad: fix no transmission of LACPDUs Configuring a bond in a specific order can leave the bond in a state where it never transmits LACPDUs. The first patch adds some kselftest infrastructure and the reproducer that demonstrates the problem. The second patch fixes the issue. The new third patch makes ad_ticks_per_sec a static const and removes the passing of this variable via the stack. ==================== Link: https://lore.kernel.org/r/cover.1660919940.git.jtoppins@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-22bonding: 3ad: make ad_ticks_per_sec a constJonathan Toppins
The value is only ever set once in bond_3ad_initialize and only ever read otherwise. There seems to be no reason to set the variable via bond_3ad_initialize when setting the global variable will do. Change ad_ticks_per_sec to a const to enforce its read-only usage. Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-22bonding: 802.3ad: fix no transmission of LACPDUsJonathan Toppins
This is caused by the global variable ad_ticks_per_sec being zero as demonstrated by the reproducer script discussed below. This causes all timer values in __ad_timer_to_ticks to be zero, resulting in the periodic timer to never fire. To reproduce: Run the script in `tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh` which puts bonding into a state where it never transmits LACPDUs. line 44: ip link add fbond type bond mode 4 miimon 200 \ xmit_hash_policy 1 ad_actor_sys_prio 65535 lacp_rate fast setting bond param: ad_actor_sys_prio given: params.ad_actor_system = 0 call stack: bond_option_ad_actor_sys_prio() -> bond_3ad_update_ad_actor_settings() -> set ad.system.sys_priority = bond->params.ad_actor_sys_prio -> ad.system.sys_mac_addr = bond->dev->dev_addr; because params.ad_actor_system == 0 results: ad.system.sys_mac_addr = bond->dev->dev_addr line 48: ip link set fbond address 52:54:00:3B:7C:A6 setting bond MAC addr call stack: bond->dev->dev_addr = new_mac line 52: ip link set fbond type bond ad_actor_sys_prio 65535 setting bond param: ad_actor_sys_prio given: params.ad_actor_system = 0 call stack: bond_option_ad_actor_sys_prio() -> bond_3ad_update_ad_actor_settings() -> set ad.system.sys_priority = bond->params.ad_actor_sys_prio -> ad.system.sys_mac_addr = bond->dev->dev_addr; because params.ad_actor_system == 0 results: ad.system.sys_mac_addr = bond->dev->dev_addr line 60: ip link set veth1-bond down master fbond given: params.ad_actor_system = 0 params.mode = BOND_MODE_8023AD ad.system.sys_mac_addr == bond->dev->dev_addr call stack: bond_enslave -> bond_3ad_initialize(); because first slave -> if ad.system.sys_mac_addr != bond->dev->dev_addr return results: Nothing is run in bond_3ad_initialize() because dev_addr equals sys_mac_addr leaving the global ad_ticks_per_sec zero as it is never initialized anywhere else. The if check around the contents of bond_3ad_initialize() is no longer needed due to commit 5ee14e6d336f ("bonding: 3ad: apply ad_actor settings changes immediately") which sets ad.system.sys_mac_addr if any one of the bonding parameters whos set function calls bond_3ad_update_ad_actor_settings(). This is because if ad.system.sys_mac_addr is zero it will be set to the current bond mac address, this causes the if check to never be true. Fixes: 5ee14e6d336f ("bonding: 3ad: apply ad_actor settings changes immediately") Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-22selftests: include bonding tests into the kselftest infraJonathan Toppins
This creates a test collection in drivers/net/bonding for bonding specific kernel selftests. The first test is a reproducer that provisions a bond and given the specific order in how the ip-link(8) commands are issued the bond never transmits an LACPDU frame on any of its slaves. Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-18 04:22:26 +0000