| Age | Commit message (Collapse) | Author |
|---|
|
Add a check to cs_dsp_coeff_write_ctrl() to abort if the control
is not writeable.
The cs_dsp code originated as an ASoC driver (wm_adsp) where all
controls were exported as ALSA controls. It relied on ALSA to
enforce the read-only permission. Now that the code has been
separated from ALSA/ASoC it must perform its own permission check.
This isn't currently causing any problems so there shouldn't be any
need to backport this. If the client of cs_dsp exposes the control as
an ALSA control, it should set permissions on that ALSA control to
protect it. The few uses of cs_dsp_coeff_write_ctrl() inside drivers
are for writable controls.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240702110809.16836-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
simple-audio-mux is designed to be used generally, thus "Input 1" or
"Input 2" are used to selecting MUX input. This numbered inputs would work,
but might be not user friendly in some case, for example in case of system
hardware design has some clear labels.
Adds new "state-labels" property and enable to select MUX by own state names.
Original
> amixer set "MUX" "Input 1"
> amixer set "MUX" "Input 2"
Use mux-names
sound_mux: mux {
compatible = "simple-audio-mux";
mux-gpios = <...>;
=> state-labels = "Label_A", "Label_B";
};
> amixer set "MUX" "Label_A"
> amixer set "MUX" "Label_B"
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
These commits remove various code that is either no longer needed,
or is redundant.
|
|
Merge series from srinivas.kandagatla@linaro.org:
Existing way of allocating soundwire master ports on Qualcommm platforms is
dynamic, and in linear order starting from 1 to MAX_PORTS.
This will work as long as soundwire device ports are 1:1 mapped
linearly. However on most Qcom SoCs like SM8550, SM8650, x1e80100, these
are NOT mapped in that order.
The result of this is that only one speaker among the pair of speakers
is always silent, With recent changes for WSA codec to support codec
versions and along with these patches we are able to get all speakers
working on these SoCs.
|
|
The 'wsa->dev' is assigned closer to the end of the probe() function, so
the dev_err() must not use it - it is still NULL at this point. Instead
there is already a local 'dev' variable.
Fixes: 727de4fbc546 ("ASoC: codecs: lpass-wsa-macro: Correct support for newer v2.5 version")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240628095831.207942-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The 'rx->dev' is assigned closer to the end of the probe() function, so
the dev_err() must not use it - it is still NULL at this point. Instead
there is already a local 'dev' variable.
Fixes: dbacef05898d ("ASoC: codec: lpass-rx-macro: prepare driver to accomdate new codec versions")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240628095831.207942-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
bitfield.h is not explicitly included but it is required for FIELD_PREP
to be expanded by the preprocessor. If it is not implicitly included,
there will be a compiler error (as seen with ARCH=hexagon allmodconfig):
sound/soc/fsl/lpc3xxx-i2s.c:169:10: error: call to undeclared function 'FIELD_PREP'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
169 | tmp |= LPC3XXX_I2S_WW8 | LPC3XXX_I2S_WS_HP(LPC3XXX_I2S_WW8_HP);
| ^
sound/soc/fsl/lpc3xxx-i2s.h:42:30: note: expanded from macro 'LPC3XXX_I2S_WW8'
42 | #define LPC3XXX_I2S_WW8 FIELD_PREP(0x3, 0) /* Word width is 8bit */
| ^
sound/soc/fsl/lpc3xxx-i2s.c:205:34: error: call to undeclared function 'FIELD_PREP'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
205 | LPC3XXX_I2S_DMA1_TX_EN | LPC3XXX_I2S_DMA0_TX_DEPTH(4));
| ^
sound/soc/fsl/lpc3xxx-i2s.h:65:38: note: expanded from macro 'LPC3XXX_I2S_DMA0_TX_DEPTH'
65 | #define LPC3XXX_I2S_DMA0_TX_DEPTH(s) FIELD_PREP(0xF0000, s) /* Set the DMA1 TX Request level */
| ^
sound/soc/fsl/lpc3xxx-i2s.c:210:34: error: call to undeclared function 'FIELD_PREP'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
210 | LPC3XXX_I2S_DMA0_RX_EN | LPC3XXX_I2S_DMA1_RX_DEPTH(4));
| ^
sound/soc/fsl/lpc3xxx-i2s.h:70:38: note: expanded from macro 'LPC3XXX_I2S_DMA1_RX_DEPTH'
70 | #define LPC3XXX_I2S_DMA1_RX_DEPTH(s) FIELD_PREP(0x700, s) /* Set the DMA1 RX Request level */
| ^
Include bitfield.h explicitly, so that FIELD_PREP is always expanded,
clearing up the compiler error.
Fixes: 0959de657a10 ("ASoC: fsl: Add i2s and pcm drivers for LPC32xx CPUs")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20240701-lpc32xx-asoc-fix-include-for-field_prep-v1-1-0c5d7f71921b@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
clang points out that ret may be used uninitialized in
lpc32xx_i2s_probe() in an error pointer path (which becomes fatal with
CONFIG_WERROR):
sound/soc/fsl/lpc3xxx-i2s.c:326:47: error: variable 'ret' is uninitialized when used here [-Werror,-Wuninitialized]
326 | "failed to init register map: %d\n", ret);
| ^~~
sound/soc/fsl/lpc3xxx-i2s.c:310:9: note: initialize the variable 'ret' to silence this warning
310 | int ret;
| ^
| = 0
1 error generated.
One solution would be a small refactoring of the second parameter in
dev_err_probe(), PTR_ERR(i2s_info_p->regs), to be the value of ret in
the if statement. However, a nicer solution for debugging purposes,
which is the point of this statement, would be to use the '%pe'
specifier to symbolically print the error pointer value. Do so, which
eliminates the uninitialized use of ret, clearing up the warning.
Fixes: 0959de657a10 ("ASoC: fsl: Add i2s and pcm drivers for LPC32xx CPUs")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20240701-lpc32xx-asoc-fix-uninitialized-ret-v1-1-985d86189739@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the RT5677 audio CODEC bindings to DT schema.
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240627105030.14360-1-animeshagarwal28@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
calibrated data files
Add name_prefix as the prefix name of DSP firmwares
and calibrated data files which stored speaker
calibrated impedance.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240629101112.628-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support to parse static master port map information from device tree.
This is required for correct port mapping between soundwire device and
master ports.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240626-port-map-v2-4-6cc1c5608cdd@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document port mapping property for wsa884x. Port mapping is required
to be able map correct master ports.
All the device ports are not mapped in same order as master ports, so
there is a need for having static port mapping for WSA codecs.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://patch.msgid.link/20240626-port-map-v2-3-6cc1c5608cdd@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support to parse static master port map information from device tree.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240626-port-map-v2-2-6cc1c5608cdd@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document port mapping property for wsa883x. Port mapping is required
to be able map correct master ports for VI feedback.
All the device ports are not mapped in same order as master ports, so
there is a need for having static port mapping for WSA codecs.
Signed-off-by: Manikantan R <quic_manrav@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://patch.msgid.link/20240626-port-map-v2-1-6cc1c5608cdd@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
simple-audio-mux is designed to be used generally, thus "Input 1" or
"Input 2" are used to selecting MUX input. This numbered inputs would
work, but might be not user friendly in some case, for example in case
of system hardware design has some clear labels.
Adds new "state-labels" property and enable to select MUX by own state
names.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/87le2m7xp8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
simple-audio-mux is designed to be used generally, thus "Input 1" or
"Input 2" are used to selecting MUX input. This numbered inputs would
work, but might be not user friendly in some case, for example in case
of system hardware design has some clear labels.
Adds new "state-labels" property and enable to select MUX by own state
names.
Original
> amixer set "MUX" "Input 1"
Use mux-names
sound_mux: mux {
compatible = "simple-audio-mux";
mux-gpios = <...>;
state-labels = "Label_A", "Label_B";
};
> amixer set "MUX" "Label_A"
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87msn27xpg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the RT5659/RT5658 audio CODEC bindings to DT schema.
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240624132949.124228-1-animeshagarwal28@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add compatible string and specific soc data to support rpmsg sound card
on i.MX95 platform.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://patch.msgid.link/20240626071202.7149-2-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add compatible string for i.MX95 platform which supports audio
function through rpmsg channel between Cortex-A and Cortex-M core.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240626071202.7149-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
struct sdw_slave_prop is zero-initialized by the SoundWire core so there
is no need to clear clk_stop_mode1 to false. Removing this also avoids
having an unnecessary build dependency on a struct member.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240701104444.172556-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
No product was ever released with A1 silicon so there is no
need for the driver to include support for it.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240701104444.172556-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch reverts a series of commits that allowed for the ASP
registers to be owned by either the driver or the firmware. Nothing
currently depends on the functionality that is being reverted, so
it is safe to remove.
The commits being reverted are (last 3 are bugfixes to the first 2):
commit 72a77d7631c6
("ASoC: cs35l56: Fix to ensure ASP1 registers match cache")
commit 07f7d6e7a124
("ASoC: cs35l56: Fix for initializing ASP1 mixer registers")
commit 4703b014f28b
("ASoC: cs35l56: fix reversed if statement in cs35l56_dspwait_asp1tx_put()")
commit c14f09f010cc
("ASoC: cs35l56: Fix deadlock in ASP1 mixer register initialization")
commit dfd2ffb37399
("ASoC: cs35l56: Prevent overwriting firmware ASP config")
These reverts have been squashed into a single commit because there
would be no reason to revert only some of them (which would just
reintroduce bugs).
The changes introduced by the commits were well-intentioned but
somewhat misguided. ACPI does not provide any information about how
audio hardware is linked together, so that information has to be
hardcoded into drivers. On Windows the firmware is customized to
statically setup appropriate configuration of the audio links,
and the intent of the commits was to re-use this information if the
Linux host drivers aren't taking control of the ASP. This would
avoid having to hardcode the ASP config into the machine driver on
some systems.
However, this added complexity and race conditions into the driver.
It also complicates implementation of new code.
The only case where the ASP is used but the host is not taking
ownership is when CS35L56 is used in SoundWire mode with the ASP
as a reference audio interconnect. But even in that case it's not
necessarily required even if the firmware initialized it. Typically
it is used to avoid the host SDCA drivers having to be capable of
aggregating capture paths from multiple SoundWire peripherals. But
the SOF SoundWire support is capable of doing that aggregation.
Reverting all these commits significantly simplifies the driver.
Let's just use the normal Linux mechanisms of the machine driver and
ALSA controls to set things up instead of trying to use the firmware
to do use-case setup.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240701104444.172556-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>:
This pach set is to bring back audio to machines with a LPC32XX CPU.
The legacy LPC32XX SoC used to have audio spport in linux 2.6.27.
The support was dropped due to lack of interest from mainaeners.
|
|
Add support for 705.6kHz and 768kHz sample rates
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20240628123256.2019224-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On i.MX8MP, there are 3 interrupts, the third interrupt is
SPDIF wakeup interrupt from PHY
Add ref: dai-common.yaml for #sound-dai-cells is needed and
XCVR is a DAI device.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/1719481981-4069-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
clk_prepare_enable() may fail, so we should better check its return
value and propagate it in the case of error.
Fixes: 62a7fc32a628 ("ASoC: max98088: Add master clock handling")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20240628080534.843815-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
./sound/soc/codecs/ak4619.c:757:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9442
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://patch.msgid.link/20240628052406.36644-1-yang.lee@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The dummy DAI should allow any (reasonable) rates possible.
Make the rate continuous for dummy and set range from 5512Hz to 768kHz
The change is mostly cosmetic as dummy is skipped when setting
the hwparams.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20240628120130.2015665-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver was ported from an old version in linux 2.6.27 and adjusted
for the new ASoC framework and DMA API.
Signed-off-by: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>
Link: https://patch.msgid.link/20240627150046.258795-12-piotr.wojtaszczyk@timesys.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add nxp,lpc3220-i2s DT binding documentation.
Signed-off-by: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240627150046.258795-4-piotr.wojtaszczyk@timesys.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Qualcomm LPASS WSA macro codec driver uses now parts of common
module, so it has to select SND_SOC_LPASS_MACRO_COMMON.
sound/soc/codecs/lpass-wsa-macro.o: in function `wsa_macro_probe':
sound/soc/codecs/lpass-wsa-macro.c:2767:(.text+0x1c9c): undefined reference to `lpass_macro_get_codec_version'
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406272231.th1LtuLk-lkp@intel.com/
Fixes: 5dcf442bbbca ("ASoC: codecs: lpass-wsa-macro: Prepare to accommodate new codec versions")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240627125203.171048-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
The transmitter and receiver part of the SAI interface need to be
configured with different master/slave mode, especially to work
with the audiomix module.
The SAI1 TX is in master mode, but SAI1 RX is in slave mode.
So add another two DAIs for TX and RX separately in fsl_sai driver.
There will be three devices for audiomix sound card, hw:x,0 is
the playback device for one SAI, hw:x,1 is the playback device
for another SAI, hw:x,2 is the capture device for audmix
output.
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Introduce the ability for sound cards to manually order the startup of
the various components in the card.
|
|
The version B will support the multi-lane function and integrate the DMIC function
in one SoundWire interface.
Due to some registers having different default values between version A and B,
this patch also removes the redundant default registers to avoid confusion.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20240620103237.2124196-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch doesn't have any change of functionality.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20240620103224.2124179-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Like "audio-routing" drop the minItems: 2 from the "audio-widgets", because
any limit here - lower or upper- is rather meaningless.
This will also fix `dtbs_check` warnings like:
sound: audio-widgets: ['Speaker', '7J4-14 LEFT', 'Speaker', '7J4-11 RIGHT'] is too long
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240605-topic-amlogic-upstream-bindings-fixes-audio-widgets-v1-1-65bd7cc2e09b@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
asoc_qcom_lpass_cpu_platform_probe()
If IORESOURCE_MEM "lpass-rxtx-cdc-dma-lpm" or "lpass-va-cdc-dma-lpm"
resources is not provided in Device Tree due to any error,
platform_get_resource_byname() will return NULL which is later
dereferenced. According to sound/qcom,lpass-cpu.yaml, these resources
are provided, but DT can be broken due to any error. In such cases driver
must be able to protect itself, since the DT is external data for the
driver.
Adjust this issues by adding NULL return check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b138706225c9 ("ASoC: qcom: Add regmap config support for codec dma driver")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Link: https://patch.msgid.link/20240605104953.12072-1-amishin@t-argos.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There will be three devices for this sound card, hw:x,0 is
the playback device for one SAI, hw:x,1 is the playback device
for another SAI, hw:x,2 is the capture device for audmix
output. then capture device and playback device can be configured
with different master/slave mode.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/1718174452-17596-4-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As audmix requires playback and capture stream in different
master/slave mode, so separate playback and capture stream to
different DAI. There are three DAIs required, two DAIs for playback
one DAI for capture.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/1718174452-17596-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The transmitter and receiver part of the SAI interface need to be
configured with different master/slave mode, especially to work
with the audiomix module.
+-------+ +-----------+
| SAI1 | --TX--> | |
| | <--RX-- | |
+-------+ | |
| AUDIOMIX |
+-------+ | |
| SAI2 | --TX--> | |
+-------+ +-----------+
The SAI1 TX is in master mode, but SAI1 RX is in slave mode.
So add another two DAIs for TX and RX separately. but only
defined fsl_sai_set_dai_fmt_tx() and fsl_sai_set_dai_fmt_rx()
ops function for current case, in the future, the other ops
function for TX and RX can be defined if required.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/1718174452-17596-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some Sound Card might need special trigger ordering which is based on
CPU/Codec connection. It is already supported on ASoC, but Audio Graph
Card2 still not yet support it. Let's support it.
Cc: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87msnqzoj8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some Sound Card might need special trigger ordering which is based on
CPU/Codec connection. It is already supported on ASoC, but Audio Graph
Card still not yet support it. Let's support it.
Cc: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87o786zojd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some Sound Card might need special trigger ordering which is based on
CPU/Codec connection. It is already supported on ASoC, but Simple Audio
Card still not yet support it. Let's support it.
Cc: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87plsmzojk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some Sound Card might need special trigger ordering which is based on
CPU/Codec connection. It is already supported on ASoC, but Simple Audio
Card / Audio Graph Card still not support it. Let's support it.
Cc: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87r0d2zojq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Sound Card need to consider/adjust HW control ordering based on the
combination of CPU/Codec. The controlling feature is already supported
on ASoC, but Simple Audio Card / Audio Graph Card still not support it.
Let's support it.
Cc: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87sexizojx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace 'int' with proper 'enum lpass_codec_version' in every place
which handles the parsed codec version (not raw register values!) to be
explicit about contents of the variable. This makes code easier to read
and compilers could check missing switch cases.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240625165736.722106-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Qualcomm LPASS macro codec driver parses registers in order to
detect version of the codec. It recognizes codecs v2.0 - v2.8, however
we know that there are earlier versions and 'enum lpass_codec_version'
has also v1.0, v1.1 and v1.2. If by any chance we run on unrecognized
version, driver will use random value from the stack as the codec
version.
Fix it by mapping such cases to an enum of value 0:
LPASS_CODEC_VERSION_UNKNOWN.
Fixes: 378918d59181 ("ASoC: codecs: lpass-macro: add helpers to get codec version")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240625165736.722106-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Starting with v2.5 of Qualcomm LPASS Codec, few registers in the WSA
macro block change. Bring proper support for this v2.5 and newer
versions, to fix second speaker playback (speaker was silent).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240625-qcom-audio-wsa-second-speaker-v1-3-f65ffdfc368c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver for Qualcomm LPASS WSA macro codec was developed and tested
on codec v2.1, however v2.5 has significant changes in the registers.
The driver correctly works for v2.1 codec, but has issues when running
on SoC with v2.5 codec (so starting with SM8450, even though playback
works properly on that SoC).
Prepare the driver for handling differences in register layouts of newer
version. This does not have functional impact on older codec versions,
but just:
1. Renames few soc_enums and widgets as v2.1,
2. For registers being different in v2.5, moves the defaults and regmap
configuration to new structures,
3. Adds new 'struct wsa_reg_layout' with offsets and masks for few
registers, so most of the code can stay unchaged on v2.5,
4. Chooses proper widgets, regmap config and register layout based on
version of the codec.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240625-qcom-audio-wsa-second-speaker-v1-2-f65ffdfc368c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
WSA_MACRO_MUX_INP_MASK2 define is not used.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240625-qcom-audio-wsa-second-speaker-v1-1-f65ffdfc368c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
