summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-07-22iio: adc: meson: init channels 0,1 input muxesGeorge Stark
Set up input channels 0,1 muxes in the same way as for the channels 2-7 later in the code. Signed-off-by: George Stark <gnstark@sberdevices.ru> Link: https://lore.kernel.org/r/20230715110654.6035-2-gnstark@sberdevices.ru Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-22iio: accel: adxl355: Simplify probe()Biju Das
Simplify the probe() by replacing of_device_get_match_data() and i2c_match_id() by i2c_get_match_data() as we have similar I2C and DT-based matching table. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Puranjay Mohan <puranjay12@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230716175218.130557-2-biju.das.jz@bp.renesas.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: meson: support reading from channel 7 mux inputsGeorge Stark
Add IIO channel for all muxed inputs of channel 7. Meson saradc channel 7 is connected to a mux that can switch input to well-known sources like Vdd, GND and several Vdd dividers. Signed-off-by: George Stark <GNStark@sberdevices.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230714114010.293440-7-gnstark@sberdevices.ru Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: meson: add channel labelsGeorge Stark
Add channel labels to provide human-readable names for the inputs. Signed-off-by: George Stark <GNStark@sberdevices.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230714114010.293440-6-gnstark@sberdevices.ru Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: meson: add enum for iio channel numbersGeorge Stark
Channels could be referenced in the driver code and using enum allows to make it more robust. Signed-off-by: George Stark <GNStark@sberdevices.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230714114010.293440-5-gnstark@sberdevices.ru Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: meson: move meson_sar_adc_set_chan7_mux routine upperGeorge Stark
meson_sar_adc_set_chan7_mux is a basic func() for writing single register, defined as static. Moved it up so it could be used in more places. Signed-off-by: George Stark <GNStark@sberdevices.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230714114010.293440-4-gnstark@sberdevices.ru Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: meson: move enums declaration before variables declarationGeorge Stark
Allow to use enum items for variables initialization. For this, move enums upper in the code. Signed-off-by: George Stark <GNStark@sberdevices.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230714114010.293440-3-gnstark@sberdevices.ru Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: meson: remove unused timestamp channelGeorge Stark
Remove IIO_CHAN_SOFT_TIMESTAMP channel because it's used only for buffering mode which is not implemented. Signed-off-by: George Stark <GNStark@sberdevices.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230714114010.293440-2-gnstark@sberdevices.ru Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: chemical: scd4x: Add pressure compensationRoan van Dijk
This patch adds pressure compensation to the scd4x driver. The pressure can be written to the sensor in hPa. The pressure will be compensated internally by the sensor. Signed-off-by: Roan van Dijk <roan@protonic.nl> Link: https://lore.kernel.org/r/20230711101419.2065107-1-roan@protonic.nl Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: Make return value check for set_trigger_state() consistentWaqar Hameed
In `iio_trigger_detach_poll_func()` the return value from `trig->ops->set_trigger_state(trig, false)` is checked with `if (ret)`. However, in `iio_trigger_attach_poll_func()` it is checked with `if (ret < 0)`. Resolve this mismatch by only checking for `if (ret)` in both places. Signed-off-by: Waqar Hameed <waqar.hameed@axis.com> Link: https://lore.kernel.org/r/pndv8eojdey.fsf@axis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20dt-bindings: iio: adc: qcom,spmi-adc7: use predefined channel idsDmitry Baryshkov
Each of qcom,spmi-adc7-pm*.h headers define a set of ADC channels that can be used for monitoring on thie particular chip. Switch them to use channel IDs defined in the dt-bindings/iio/qcom,spmi-vadc.h header instead of specifying the numeric IDs. Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230707123027.1510723-2-dmitry.baryshkov@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: ti-lmp92064: add buffering supportLeonard Göhrs
Enable buffered reading of samples from the LMP92064 ADC. The main benefit of this change is being able to read out current and voltage measurements in a single transfer, allowing instantaneous power measurements. Reads into the buffer can be triggered by any software triggers, e.g. the iio-trig-hrtimer: $ mkdir /sys/kernel/config/iio/triggers/hrtimer/my-trigger $ cat /sys/bus/iio/devices/iio\:device3/name lmp92064 $ iio_readdev -t my-trigger -b 16 iio:device3 | hexdump WARNING: High-speed mode not enabled 0000000 0000 0176 0101 0001 5507 abd5 7645 1768 0000010 0000 016d 0101 0001 ee1e ac6b 7645 1768 ... Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230707063635.1496437-1-l.goehrs@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: stm32-adc: Use devm_platform_get_and_ioremap_resource()Yangtao Li
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li <frank.li@vivo.com> Link: https://lore.kernel.org/r/20230704095808.33780-1-frank.li@vivo.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: qcom-spmi-adc5: Add ADC5_GPIO2_100K_PUKonrad Dybcio
Even though it existed in bindings for the longest time, ADC5_GPIO2_100K_PU was never assigned in the driver. Do so. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230627-topic-adc-v1-1-c61581abffa3@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: imu: inv_mpu6050: read the full fifo when processing dataJean-Baptiste Maneyrol
When processing data read the full fifo data in 1 time. If there are several samples in the FIFO, it means we are experiencing system delay. In this case, it is better to read all data with 1 bus access than to add additional latency by doing several ones. This requires to use a bigger buffer depending on chip FIFO size and do an additional local data copy before sending. But the cost is minimal and behavior is still better like this under system heavy load. Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://lore.kernel.org/r/20230623082924.283967-1-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20dt-bindings: iio: adc: ti,ads1015: fix datarate max value and meaningMarco Felsch
Datarate (dr) is a 3-bit wide register field. Values from 0 to 7 are allowed for all devices but only for the ADS1115 devices a value of 7 does make a difference. While on it fix the description of the datarate for ADS1115 devices as well. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230621160857.3400747-1-m.felsch@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: ad7192: Use sysfs_emit_atAlisa Roman
Replace scnprintf with sysfs_emit_at which is the preferred alternative. Also make sure each fractional digit is in its place by padding with zeros up to 3 digits: "...%03d...". Signed-off-by: Alisa Roman <alisa.roman@analog.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230620163135.93780-1-alisa.roman@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20dt-bindings: iio: adc: Add Allwinner D1/T113s/R329/T507 SoCs GPADCMaksim Kiselev
Allwinner's D1/T113s/R329/T507 SoCs have a new general purpose ADC. This ADC is the same for all of this SoCs. The only difference is the number of available channels. Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com> Link: https://lore.kernel.org/r/20230619154252.3951913-4-bigunclemax@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: Add Allwinner D1/T113s/R329/T507 SoCs GPADCMaksim Kiselev
The General Purpose ADC (GPADC) can convert the external signal into a certain proportion of digital value, to realize the measurement of analog signal, which can be applied to power detection and key detection. Theoretically, this ADC can support up to 16 channels. All SoCs below contain this GPADC IP. The only difference between them is the number of available channels: T113 - 1 channel D1 - 2 channels R329 - 4 channels T507 - 4 channels Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com> Link: https://lore.kernel.org/r/20230619154252.3951913-3-bigunclemax@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: Kconfig change description for Allwinner GPADCMaksim Kiselev
This patch adds SoCs names to Allwinner GPADC description to make it more informative. Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com> Link: https://lore.kernel.org/r/20230619154252.3951913-2-bigunclemax@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: light: vcnl4000: Add calibration bias for 4040/4200Astrid Rost
The calibration bias is setting the LED current to change the detection distance. Add read/write attribute for proximity calibration bias and read attribute for available values. This is supported for vcnl4040 and vcnl4200. Signed-off-by: Astrid Rost <astrid.rost@axis.com> Link: https://lore.kernel.org/r/20230613135025.2596641-9-astrid.rost@axis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: light: vcnl4000: Add oversampling_ratio for 4040/4200Astrid Rost
Add the proximity multi pulse (PS_MPS) as oversampling_ratio. Instead of one single pulse per every defined time frame, one can program2, 4, or even 8 pulses. This leads to a longer IRED on-time for each proximity measurement value, which also results in a higher detection range. Add read/write attribute for proximity oversampling-ratio and read attribute for available oversampling-ratio. This is supported for vcnl4040 and vcnl4200. Signed-off-by: Astrid Rost <astrid.rost@axis.com> Link: https://lore.kernel.org/r/20230613135025.2596641-8-astrid.rost@axis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: light: vcnl4000: Add period for vcnl4040/4200Astrid Rost
Add read/write attribute for proximity and illuminance period. The period is set in the interrupt persistence flags(PS_PERS and ALS_PERS). An interrupt will not be asserted if the raw value is not over (or lower) than the threshold for the set continued amount of measurements. The time in seconds is calculated by the number of continued refreshes multiplied with the integration time. It will always pick the next lower possible value. The period changes, if the integration time is changed. Signed-off-by: Astrid Rost <astrid.rost@axis.com> Link: https://lore.kernel.org/r/20230613135025.2596641-7-astrid.rost@axis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: light: vcnl4000: add illuminance irq vcnl4040/4200Astrid Rost
Add support to configure ambient light sensor interrupts and threshold limits for vcnl4040 and vcnl4200. If an interrupt is detected an event will be pushed to the event interface. Signed-off-by: Astrid Rost <astrid.rost@axis.com> Link: https://lore.kernel.org/r/20230613135025.2596641-6-astrid.rost@axis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: light: vcnl4000: Add als_it for vcnl4040/4200Astrid Rost
Add illuminance integration time for vcnl4040 and vcnl4200. Add read/write attribute for illuminance integration time and read attribute for available integration times. Set scale and sampling rate according to the integration time. Signed-off-by: Astrid Rost <astrid.rost@axis.com> Link: https://lore.kernel.org/r/20230613135025.2596641-5-astrid.rost@axis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: light: vcnl4000: Check type with switch caseAstrid Rost
Check IIO_PROXIMITY with switch case in order to make it easier to add further types like light. Add check for IIO_EV_INFO_VALUE for writing rising or falling events. Signed-off-by: Astrid Rost <astrid.rost@axis.com> Link: https://lore.kernel.org/r/20230613135025.2596641-4-astrid.rost@axis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: light: vcnl4000: Add proximity ps_it for vcnl4200Astrid Rost
Add ps_it attributes for vcnl4200 (similar to vcnl4040). Add read/write attribute for proximity integration time. Read attribute for available proximity integration times. Change sampling rate depending on integration time. Signed-off-by: Astrid Rost <astrid.rost@axis.com> Link: https://lore.kernel.org/r/20230613135025.2596641-3-astrid.rost@axis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: light: vcnl4000: Add proximity irq for vcnl4200Astrid Rost
Add proximity interrupt support for vcnl4200 (similar to vcnl4040). Add support to configure proximity sensor interrupts and threshold limits. If an interrupt is detected an event will be pushed to the event interface. Signed-off-by: Astrid Rost <astrid.rost@axis.com> Link: https://lore.kernel.org/r/20230613135025.2596641-2-astrid.rost@axis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: accel: da280: Add support for the DA217 accelerometerHans de Goede
The DA217 accelerometer is another DA280 compatible accelerometer, add its device-ids to the da280 driver. Reported-by: Juno Computers USA <usa@junocomputers.com> Tested-by: Juno Computers USA <usa@junocomputers.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230613094346.162551-1-hdegoede@redhat.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: imu: inv_mpu6050: use the common inv_sensors timestamp moduleJean-Baptiste Maneyrol
Replace timestamping by the new common inv_sensors timestamp module. The principle behind is the same but the implementation in the new module is far better providing less jitter and a better estimation. Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20230606162147.79667-5-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: make invensense timestamp module genericJean-Baptiste Maneyrol
Rename common module to inv_sensors_timestamp, add configuration at init (chip internal clock, acceptable jitter, ...) and update inv_icm42600 driver integration. Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20230606162147.79667-4-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: move inv_icm42600 timestamp module in commonJean-Baptiste Maneyrol
Create new inv_sensors common modules and move inv_icm42600 timestamp module inside. This module will be used by IMUs and also in the future by other chips. Modify inv_icm42600 driver to use timestamp module and do some headers cleanup. Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20230606162147.79667-3-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: imu: inv_icm42600: make timestamp module chip independentJean-Baptiste Maneyrol
Move icm42600 dependent function inside the core module. Do some headers cleanup at the same time. Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20230606162147.79667-2-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-15iio: adi: ad7192: Add error check and more debug logMarkus Burri
Print read and expected device ID as debug warning. Add error check for ad_sd_init() result. Reviewed-by: Nuno Sa <nuno.sa@analog.com> Signed-off-by: Markus Burri <markus.burri@mt.com> Link: https://lore.kernel.org/r/20230614073033.2497318-1-markus.burri@mt.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-15iio: adc: ad7192: Simplify using devm_clk_get_optional_enabled()Christophe JAILLET
If st->mclk is not NULL, then st->clock_sel is either AD7192_CLK_EXT_MCLK2 or AD7192_CLK_EXT_MCLK1_2. So devm_clk_get_optional_enabled() can be used instead of hand writing it. This saves some line of code. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/7dbe973905f1fdae5d2f5ae5a3b01dd1d6a9925b.1686774340.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-15dt-bindings: iio: semtech,sx9324: reference common schema for labelKrzysztof Kozlowski
Reference iio.yaml schema from dtschema to allow already used label property: sc7180-trogdor-pazquel360-lte.dtb: proximity@28: 'label' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230617103658.114453-2-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-15dt-bindings: iio: semtech,sx9310: reference common schema for labelKrzysztof Kozlowski
Reference iio.yaml schema from dtschema to allow already used label property: sc7180-trogdor-homestar-r4.dtb: proximity@28: 'label' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230617103658.114453-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-09Linux 6.5-rc1Linus Torvalds
2023-07-09MAINTAINERS 2: Electric BoogalooLinus Torvalds
We just sorted the entries and fields last release, so just out of a perverse sense of curiosity, I decided to see if we can keep things ordered for even just one release. The answer is "No. No we cannot". I suggest that all kernel developers will need weekly training sessions, involving a lot of Big Bird and Sesame Street. And at the yearly maintainer summit, we will all sing the alphabet song together. I doubt I will keep doing this. At some point "perverse sense of curiosity" turns into just a cold dark place filled with sadness and despair. Repeats: 80e62bc8487b ("MAINTAINERS: re-sort all entries and fields") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-09Merge tag 'dma-mapping-6.5-2023-07-09' of ↵Linus Torvalds
git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fixes from Christoph Hellwig: - swiotlb area sizing fixes (Petr Tesarik) * tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: reduce the number of areas to match actual memory pool size swiotlb: always set the number of areas before allocating the pool
2023-07-09Merge tag 'irq_urgent_for_v6.5_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq update from Borislav Petkov: - Optimize IRQ domain's name assignment * tag 'irq_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqdomain: Use return value of strreplace()
2023-07-09Merge tag 'x86_urgent_for_v6.5_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fpu fix from Borislav Petkov: - Do FPU AP initialization on Xen PV too which got missed by the recent boot reordering work * tag 'x86_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/xen: Fix secondary processors' FPU initialization
2023-07-09Merge tag 'x86-core-2023-07-09' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Thomas Gleixner: "A single fix for the mechanism to park CPUs with an INIT IPI. On shutdown or kexec, the kernel tries to park the non-boot CPUs with an INIT IPI. But the same code path is also used by the crash utility. If the CPU which panics is not the boot CPU then it sends an INIT IPI to the boot CPU which resets the machine. Prevent this by validating that the CPU which runs the stop mechanism is the boot CPU. If not, leave the other CPUs in HLT" * tag 'x86-core-2023-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/smp: Don't send INIT to boot CPU
2023-07-09Merge tag 'mips_6.5_1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - fixes for KVM - fix for loongson build and cpu probing - DT fixes * tag 'mips_6.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: kvm: Fix build error with KVM_MIPS_DEBUG_COP0_COUNTERS enabled MIPS: dts: add missing space before { MIPS: Loongson: Fix build error when make modules_install MIPS: KVM: Fix NULL pointer dereference MIPS: Loongson: Fix cpu_probe_loongson() again
2023-07-09Merge tag 'xfs-6.5-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull xfs fix from Darrick Wong: "Nothing exciting here, just getting rid of a gcc warning that I got tired of seeing when I turn on gcov" * tag 'xfs-6.5-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix uninit warning in xfs_growfs_data
2023-07-09Merge tag '6.5-rc-smb3-client-fixes-part2' of ↵Linus Torvalds
git://git.samba.org/sfrench/cifs-2.6 Pull more smb client updates from Steve French: - fix potential use after free in unmount - minor cleanup - add worker to cleanup stale directory leases * tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: Add a laundromat thread for cached directories smb: client: remove redundant pointer 'server' cifs: fix session state transition to avoid use-after-free issue
2023-07-09Merge tag 'ntb-6.5' of https://github.com/jonmason/ntbLinus Torvalds
Pull NTB updates from Jon Mason: "Fixes for pci_clean_master, error handling in driver inits, and various other issues/bugs" * tag 'ntb-6.5' of https://github.com/jonmason/ntb: ntb: hw: amd: Fix debugfs_create_dir error checking ntb.rst: Fix copy and paste error ntb_netdev: Fix module_init problem ntb: intel: Remove redundant pci_clear_master ntb: epf: Remove redundant pci_clear_master ntb_hw_amd: Remove redundant pci_clear_master ntb: idt: drop redundant pci_enable_pcie_error_reporting() MAINTAINERS: git://github -> https://github.com for jonmason NTB: EPF: fix possible memory leak in pci_vntb_probe() NTB: ntb_tool: Add check for devm_kcalloc NTB: ntb_transport: fix possible memory leak while device_register() fails ntb: intel: Fix error handling in intel_ntb_pci_driver_init() NTB: amd: Fix error handling in amd_ntb_pci_driver_init() ntb: idt: Fix error handling in idt_pci_driver_init()
2023-07-08mm: lock newly mapped VMA with corrected orderingHugh Dickins
Lockdep is certainly right to complain about (&vma->vm_lock->lock){++++}-{3:3}, at: vma_start_write+0x2d/0x3f but task is already holding lock: (&mapping->i_mmap_rwsem){+.+.}-{3:3}, at: mmap_region+0x4dc/0x6db Invert those to the usual ordering. Fixes: 33313a747e81 ("mm: lock newly mapped VMA which can be modified after it becomes visible") Cc: stable@vger.kernel.org Signed-off-by: Hugh Dickins <hughd@google.com> Tested-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-08Merge tag 'mm-hotfixes-stable-2023-07-08-10-43' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull hotfixes from Andrew Morton: "16 hotfixes. Six are cc:stable and the remainder address post-6.4 issues" The merge undoes the disabling of the CONFIG_PER_VMA_LOCK feature, since it was all hopefully fixed in mainline. * tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: lib: dhry: fix sleeping allocations inside non-preemptable section kasan, slub: fix HW_TAGS zeroing with slub_debug kasan: fix type cast in memory_is_poisoned_n mailmap: add entries for Heiko Stuebner mailmap: update manpage link bootmem: remove the vmemmap pages from kmemleak in free_bootmem_page MAINTAINERS: add linux-next info mailmap: add Markus Schneider-Pargmann writeback: account the number of pages written back mm: call arch_swap_restore() from do_swap_page() squashfs: fix cache race with migration mm/hugetlb.c: fix a bug within a BUG(): inconsistent pte comparison docs: update ocfs2-devel mailing list address MAINTAINERS: update ocfs2-devel mailing list address mm: disable CONFIG_PER_VMA_LOCK until its fixed fork: lock VMAs of the parent process when forking
2023-07-08fork: lock VMAs of the parent process when forkingSuren Baghdasaryan
When forking a child process, the parent write-protects anonymous pages and COW-shares them with the child being forked using copy_present_pte(). We must not take any concurrent page faults on the source vma's as they are being processed, as we expect both the vma and the pte's behind it to be stable. For example, the anon_vma_fork() expects the parents vma->anon_vma to not change during the vma copy. A concurrent page fault on a page newly marked read-only by the page copy might trigger wp_page_copy() and a anon_vma_prepare(vma) on the source vma, defeating the anon_vma_clone() that wasn't done because the parent vma originally didn't have an anon_vma, but we now might end up copying a pte entry for a page that has one. Before the per-vma lock based changes, the mmap_lock guaranteed exclusion with concurrent page faults. But now we need to do a vma_start_write() to make sure no concurrent faults happen on this vma while it is being processed. This fix can potentially regress some fork-heavy workloads. Kernel build time did not show noticeable regression on a 56-core machine while a stress test mapping 10000 VMAs and forking 5000 times in a tight loop shows ~5% regression. If such fork time regression is unacceptable, disabling CONFIG_PER_VMA_LOCK should restore its performance. Further optimizations are possible if this regression proves to be problematic. Suggested-by: David Hildenbrand <david@redhat.com> Reported-by: Jiri Slaby <jirislaby@kernel.org> Closes: https://lore.kernel.org/all/dbdef34c-3a07-5951-e1ae-e9c6e3cdf51b@kernel.org/ Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com> Closes: https://lore.kernel.org/all/b198d649-f4bf-b971-31d0-e8433ec2a34c@applied-asynchrony.com/ Reported-by: Jacob Young <jacobly.alt@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217624 Fixes: 0bff0aaea03e ("x86/mm: try VMA lock-based page fault handling first") Cc: stable@vger.kernel.org Signed-off-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-07-15 07:02:21 +0000