summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-10-21tty: serial: 8250: Cleanup MOXA configurationsCrescent CY Hsieh
To improve clarity, clean up the MOXA configurations within serial_pci_tbl using PCI_VDEVICE(). Signed-off-by: Crescent CY Hsieh <crescentcy.hsieh@moxa.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20231018091739.10125-3-crescentcy.hsieh@moxa.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-21tty: serial: 8250: Modify MOXA enum name within 8250_pci.cCrescent CY Hsieh
To improve clarity, modify the MOXA enum name within pci_board_num_t. Signed-off-by: Crescent CY Hsieh <crescentcy.hsieh@moxa.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20231018091739.10125-2-crescentcy.hsieh@moxa.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-21dt-bindings: serial: rs485: Add rs485-rts-active-highFrancesco Dolcini
Add rs485-rts-active-high property, this is a legacy property used by 8250_omap. This fixes the following make dt_binding_check warning: Documentation/devicetree/bindings/serial/8250_omap.yaml: rs485-rts-active-high: missing type definition Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Closes: https://lore.kernel.org/all/CAMuHMdUkPiA=o_QLyuwsTYW7y1ksCjHAqyNSHFx2QZ-dP-HGsQ@mail.gmail.com/ Fixes: 403e97d6ab2c ("dt-bindings: serial: 8250_omap: add rs485-rts-active-high") Cc: stable <stable@kernel.org> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231019154834.41721-1-francesco@dolcini.it Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-21tty: serial: samsung_tty: remove dead codeAndré Draszik
When support for various old platforms was removed in commit 1ea35b355722 ("ARM: s3c: remove s3c24xx specific hacks"), s3c24xx_serial_ops also became unused here because nothing sets port type TYPE_S3C24XX anymore. Remove s3c24xx_serial_ops and all the code that's unreachable now. Fixes: 1ea35b355722 ("ARM: s3c: remove s3c24xx specific hacks") Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20231019100901.4026680-1-andre.draszik@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-21tty: whitespaces in descriptions corrected by replacing tabs with spacesFlorian Eckert
Tabs were used in the function description, to make this look more uniform, the tabs were replaced by spaces where necessary. While we're at it, I also replaced the 'ndashes' with simple dashes, since only those are supported by sphinx. Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Florian Eckert <fe@dev.tdt.de> Link: https://lore.kernel.org/r/20231019112809.881730-2-fe@dev.tdt.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-21serial/esp32_uart: use prescaler when availableMax Filippov
esp32s3 variant of the esp32 UART has limited baudrate divisor range that does not allow it to use 9600 and lower rates with 40MHz input clock. Use clock prescaler present in this UART variant to help with that. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Link: https://lore.kernel.org/r/20231018191252.1551972-1-jcmvbkbc@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-21dt-bindings: serial: re-order entries to match coding conventionKrzysztof Kozlowski
The DT schema coding convention expressed in Documentation/devicetree/bindings/example-schema.yaml expects entries in following order: - properties, patternProperties - required - if blocks, allOf with if-blocks - additionalProperties/unevaluatedProperties Re-order few schemas to match the convention to avoid repeating review comments for new patches using existing code as template. No functional changes. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231016181909.368429-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-17console: fix up ARM screen_info referenceArnd Bergmann
Separating the VGA console screen_info from the EFI one unfortunately caused a build failure for footbridge that I had never caught with randconfig builds: arch/arm/kernel/setup.c:932:27: error: static declaration of 'vgacon_screen_info' follows non-static declaration 932 | static struct screen_info vgacon_screen_info = { | ^~~~~~~~~~~~~~~~~~ In file included from arch/arm/kernel/setup.c:44: arch/arm/include/asm/setup.h:40:27: note: previous declaration of 'vgacon_screen_info' with type 'struct screen_info' 40 | extern struct screen_info vgacon_screen_info; | ^~~~~~~~~~~~~~~~~~ arm-linux-gnueabi-ld: drivers/video/console/dummycon.o: in function `dummycon_init': dummycon.c:(.text+0xe4): undefined reference to `screen_info' Make sure the variable is global to avoid the conflict with the extern declaration, and make it work in dummycon.c Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231017093947.3627976-2-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-17efi: move screen_info into efi init codeArnd Bergmann
After the vga console no longer relies on global screen_info, there are only two remaining use cases: - on the x86 architecture, it is used for multiple boot methods (bzImage, EFI, Xen, kexec) to commucate the initial VGA or framebuffer settings to a number of device drivers. - on other architectures, it is only used as part of the EFI stub, and only for the three sysfb framebuffers (simpledrm, simplefb, efifb). Remove the duplicate data structure definitions by moving it into the efi-init.c file that sets it up initially for the EFI case, leaving x86 as an exception that retains its own definition for non-EFI boots. The added #ifdefs here are optional, I added them to further limit the reach of screen_info to configurations that have at least one of the users enabled. Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231017093947.3627976-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-17printk: Constify name for add_preferred_console()Tony Lindgren
While adding a preferred console handling for serial_core for serial port hardware based device addressing, Jiri suggested we constify name for add_preferred_console(). The name gets copied anyways. This allows serial core to add a preferred console using serial drv->dev_name without copying it. Note that constifying options causes changes all over the place because of struct console for match(). Suggested-by: Jiri Slaby <jirislaby@kernel.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20231012064300.50221-2-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-17printk: Check valid console index for preferred consoleTony Lindgren
Let's check for valid console index values for preferred console to avoid bogus console index numbers from kernel command line. Let's also return an error for negative index numbers for the preferred console. Unlike for device drivers, a negative index is not valid for the preferred console. Let's also constify idx while at it. Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20231012064300.50221-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-17hyperv: avoid dependency on screen_infoArnd Bergmann
The two hyperv framebuffer drivers (hyperv_fb or hyperv_drm_drv) access the global screen_info in order to take over from the sysfb framebuffer, which in turn could be handled by simplefb, simpledrm or efifb. Similarly, the vmbus_drv code marks the original EFI framebuffer as reserved, but this is not required if there is no sysfb. As a preparation for making screen_info itself more local to the sysfb helper code, add a compile-time conditional in all three files that relate to hyperv fb and just skip this code if there is no sysfb that needs to be unregistered. Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231009211845.3136536-9-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-17vga16fb: drop powerpc supportArnd Bergmann
I noticed that commit 0db5b61e0dc07 ("fbdev/vga16fb: Create EGA/VGA devices in sysfb code") broke vga16fb on non-x86 platforms, because the sysfb code never creates a vga-framebuffer device when screen_info.orig_video_isVGA is set to '1' instead of VIDEO_TYPE_VGAC. However, it turns out that the only architecture that has allowed building vga16fb in the past 20 years is powerpc, and this only worked on two 32-bit platforms and never on 64-bit powerpc. The last machine that actually used this was removed in linux-3.10, so this is all dead code and can be removed. The big-endian support in vga16fb.c could also be removed, but I'd just leave this in place. Fixes: 933ee7119fb14 ("powerpc: remove PReP platform") Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231009211845.3136536-8-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-17vgacon: clean up global screen_info instancesArnd Bergmann
To prepare for completely separating the VGA console screen_info from the one used in EFI/sysfb, rename the vgacon instances and make them local as much as possible. ia64 and arm both have confurations with vgacon and efi, but the contents never overlaps because ia64 has no EFI framebuffer, and arm only has vga console on legacy platforms without EFI. Renaming these is required before the EFI screen_info can be moved into drivers/firmware. The ia64 vga console is actually registered in two places from setup_arch(), but one of them is wrong, so drop the one in pcdp.c and fix the one in setup.c to use the correct conditional. x86 has to keep them together, as the boot protocol is used to switch between VGA text console and framebuffer through the screen_info data. Acked-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Khalid Aziz <khalid@gonehiking.org> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231009211845.3136536-7-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-17vgacon: remove screen_info dependencyArnd Bergmann
The vga console driver is fairly self-contained, and only used by architectures that explicitly initialize the screen_info settings. Chance every instance that picks the vga console by setting conswitchp to call a function instead, and pass a reference to the screen_info there. Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Khalid Azzi <khalid@gonehiking.org> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231009211845.3136536-6-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-17vgacon, arch/*: remove unused screen_info definitionsArnd Bergmann
A number of architectures either kept the screen_info definition for historical purposes as it used to be required by the generic VT code, or they copied it from another architecture in order to build the VGA console driver in an allmodconfig build. The mips definition is used by some platforms, but the initialization on jazz is not needed. Now that vgacon no longer builds on these architectures, remove the stale definitions and initializations. Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Dinh Nguyen <dinguyen@kernel.org> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Acked-by: Guo Ren <guoren@kernel.org> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231009211845.3136536-5-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-17dummycon: limit Arm console size hack to footbridgeArnd Bergmann
The dummycon default console size used to be determined by architecture, but now this is a Kconfig setting on everything except ARM. Tracing this back in the historic git trees, this was used to match the size of VGA console or VGA framebuffer on early machines, but nowadays that code is no longer used, except probably on the old footbridge/netwinder since that is the only one that supports vgacon. On machines with a framebuffer, booting with DT so far results in always using the hardcoded 80x30 size in dummycon, while on ATAGS the setting can come from a bootloader specific override. Both seem to be worse choices than the Kconfig setting, since the actual text size for fbcon also depends on the selected font. Make this work the same way as everywhere else and use the normal Kconfig setting, except for the footbridge with vgacon, which keeps using the traditional code. If vgacon is disabled, footbridge can also ignore the setting. This means the screen_info only has to be provided when either vgacon or EFI are enabled now. To limit the amount of surprises on Arm, change the Kconfig default to the previously used 80x30 setting instead of the usual 80x25. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231009211845.3136536-4-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-17vgacon: rework screen_info #ifdef checksArnd Bergmann
On non-x86 architectures, the screen_info variable is generally only used for the VGA console where supported, and in some cases the EFI framebuffer or vga16fb. Now that we have a definite list of which architectures actually use it for what, use consistent #ifdef checks so the global variable is only defined when it is actually used on those architectures. Loongarch and riscv have no support for vgacon or vga16fb, but they support EFI firmware, so only that needs to be checked, and the initialization can be removed because that is handled by EFI. IA64 has both vgacon and EFI, though EFI apparently never uses a framebuffer here. Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Khalid Aziz <khalid@gonehiking.org> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231009211845.3136536-3-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-17vgacon: rework Kconfig dependenciesArnd Bergmann
The list of dependencies here is phrased as an opt-out, but this is missing a lot of architectures that don't actually support VGA consoles, and some of the entries are stale: - powerpc used to support VGA consoles in the old arch/ppc codebase, but the merged arch/powerpc never did - arm lists footbridge, integrator and netwinder, but netwinder is actually part of footbridge, and integrator does not appear to have an actual VGA hardware, or list it in its ATAG or DT. - mips has a few platforms (malta, sibyte, and sni) that initialize screen_info, on everything else the console is selected but cannot actually work. - csky, hexgagon, loongarch, nios2, riscv and xtensa are not listed in the opt-out table and declare a screen_info to allow building vga_con, but this cannot work because the console is never selected. Replace this with an opt-in table that lists only the platforms that remain. This is effectively x86, plus a couple of historic workstation and server machines that reused parts of the x86 system architecture. Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Khalid Aziz <khalid@gonehiking.org> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20231009211845.3136536-2-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-17tty: serial: meson: fix hard LOCKUP on crtscts modePavel Krasavin
There might be hard lockup if we set crtscts mode on port without RTS/CTS configured: # stty -F /dev/ttyAML6 crtscts; echo 1 > /dev/ttyAML6; echo 2 > /dev/ttyAML6 [ 95.890386] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 95.890857] rcu: 3-...0: (201 ticks this GP) idle=e33c/1/0x4000000000000000 softirq=5844/5846 fqs=4984 [ 95.900212] rcu: (detected by 2, t=21016 jiffies, g=7753, q=296 ncpus=4) [ 95.906972] Task dump for CPU 3: [ 95.910178] task:bash state:R running task stack:0 pid:205 ppid:1 flags:0x00000202 [ 95.920059] Call trace: [ 95.922485] __switch_to+0xe4/0x168 [ 95.925951] 0xffffff8003477508 [ 95.974379] watchdog: Watchdog detected hard LOCKUP on cpu 3 [ 95.974424] Modules linked in: 88x2cs(O) rtc_meson_vrtc Possible solution would be to not allow to setup crtscts on such port. Tested on S905X3 based board. Fixes: ff7693d079e5 ("ARM: meson: serial: add MesonX SoC on-chip uart driver") Cc: stable@vger.kernel.org Signed-off-by: Pavel Krasavin <pkrasavin@imaqliq.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Dmitry Rokosov <ddrokosov@salutedevices.com> v6: stable tag added v5: https://lore.kernel.org/lkml/OF43DA36FF.2BD3BB21-ON00258A47.005A8125-00258A47.005A9513@gdc.ru/ added missed Reviewed-by tags, Fixes tag added according to Dmitry and Neil notes v4: https://lore.kernel.org/lkml/OF55521400.7512350F-ON00258A47.003F7254-00258A47.0040E15C@gdc.ru/ More correct patch subject according to Jiri's note v3: https://lore.kernel.org/lkml/OF6CF5FFA0.CCFD0E8E-ON00258A46.00549EDF-00258A46.0054BB62@gdc.ru/ "From:" line added to the mail v2: https://lore.kernel.org/lkml/OF950BEF72.7F425944-ON00258A46.00488A76-00258A46.00497D44@gdc.ru/ braces for single statement removed according to Dmitry's note v1: https://lore.kernel.org/lkml/OF28B2B8C9.5BC0CD28-ON00258A46.0037688F-00258A46.0039155B@gdc.ru/ Link: https://lore.kernel.org/r/OF66360032.51C36182-ON00258A48.003F656B-00258A48.0040092C@gdc.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-16drivers/tty/serial: add ESP32S3 ACM gadget driverMax Filippov
Add driver for the ACM gadget controller of the Espressif ESP32S3 SoC. Hardware specification is available at the following URL: https://www.espressif.com/sites/default/files/documentation/esp32-s3_technical_reference_manual_en.pdf (Chapter 33 USB Serial/JTAG Controller) Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Link: https://lore.kernel.org/r/20231010085926.1021667-6-jcmvbkbc@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-16dt-bindings: serial: document esp32s3-acmMax Filippov
Add documentation for the ESP32S3 USB CDC-ACM gadget controller. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20231010085926.1021667-5-jcmvbkbc@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-16drivers/tty/serial: add driver for the ESP32 UARTMax Filippov
Add driver for the UART controllers of the Espressif ESP32 and ESP32S3 SoCs. Hardware specification is available at the following URLs: https://www.espressif.com/sites/default/files/documentation/esp32_technical_reference_manual_en.pdf (Chapter 13 UART Controller) https://www.espressif.com/sites/default/files/documentation/esp32-s3_technical_reference_manual_en.pdf (Chapter 26 UART Controller) Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Link: https://lore.kernel.org/r/20231010085926.1021667-4-jcmvbkbc@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-16dt-bindings: serial: document esp32-uartMax Filippov
Add documentation for the ESP32xx UART controllers. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20231010085926.1021667-3-jcmvbkbc@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-16serial: core: tidy invalid baudrate handling in uart_get_baud_rateMax Filippov
uart_get_baud_rate has input parameters 'min' and 'max' limiting the range of acceptable baud rates from the caller's perspective. If neither current or old termios structures have acceptable baud rate setting and 9600 is not in the min/max range either the function returns 0 and issues a warning. However for a UART that does not support speed of 9600 baud this is expected behavior. Clarify that 0 can be (and always could be) returned from the uart_get_baud_rate. Don't issue a warning in that case. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Link: https://lore.kernel.org/r/20231010085926.1021667-2-jcmvbkbc@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-16serial: xilinx_uartps: unset STOPBRK when setting STARTBRKJulien Malik
Zynq UG585 states, in chapter B.33, for XUARTPS_CR_STARTBRK: It can only be set if STPBRK (Stop transmitter break) is not high This fixes tcsendbreak, which otherwise does not actually break. Signed-Off-By: Julien Malik <julien.malik@unseenlabs.fr> Link: https://lore.kernel.org/r/20230624210323.88455-1-julien.malik@unseenlabs.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-16serial: max310x: remove trailing whitespacesHugo Villeneuve
Fix coding style. No functional changes. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231011130317.3562401-1-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-16dt-bindings: serial: sc16is7xx: move 'allOf' block after 'required'Hugo Villeneuve
The 'allOf' block should go after the 'required' block according to DT bindings best practices. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231013141925.3427158-2-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-16dt-bindings: serial: max310x: convert to YAMLHugo Villeneuve
Convert binding from text format to YAML. Additions to original text binding: - add rs485 reference. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231012152647.2607455-1-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-16Merge 6.6-rc6 into tty-nextGreg Kroah-Hartman
We need the tty/serial fixes in here as well for testing, and this resolves merge conflicts in: drivers/tty/serial/serial_core.c as reported in linux-next Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-15Linux 6.6-rc6Linus Torvalds
2023-10-15Revert "x86/smp: Put CPUs into INIT on shutdown if possible"Linus Torvalds
This reverts commit 45e34c8af58f23db4474e2bfe79183efec09a18b, and the two subsequent fixes to it: 3f874c9b2aae ("x86/smp: Don't send INIT to non-present and non-booted CPUs") b1472a60a584 ("x86/smp: Don't send INIT to boot CPU") because it seems to result in hung machines at shutdown. Particularly some Dell machines, but Thomas says "The rest seems to be Lenovo and Sony with Alderlake/Raptorlake CPUs - at least that's what I could figure out from the various bug reports. I don't know which CPUs the DELL machines have, so I can't say it's a pattern. I agree with the revert for now" Ashok Raj chimes in: "There was a report (probably this same one), and it turns out it was a bug in the BIOS SMI handler. The client BIOS's were waiting for the lowest APICID to be the SMI rendevous master. If this is MeteorLake, the BSP wasn't the one with the lowest APIC and it triped here. The BIOS change is also being pushed to others for assimilation :) Server BIOS's had this correctly for a while now" and it does look likely to be some bad interaction between SMI and the non-BSP cores having put into INIT (and thus unresponsive until reset). Link: https://bbs.archlinux.org/viewtopic.php?pid=2124429 Link: https://www.reddit.com/r/openSUSE/comments/16qq99b/tumbleweed_shutdown_did_not_finish_completely/ Link: https://forum.artixlinux.org/index.php/topic,5997.0.html Link: https://bugzilla.redhat.com/show_bug.cgi?id=2241279 Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-10-15virtio_net: fix the missing of the dma cpu syncXuan Zhuo
Commit 295525e29a5b ("virtio_net: merge dma operations when filling mergeable buffers") unmaps the buffer with DMA_ATTR_SKIP_CPU_SYNC when the dma->ref is zero. We do that with DMA_ATTR_SKIP_CPU_SYNC, because we do not want to do the sync for the entire page_frag. But that misses the sync for the current area. This patch does cpu sync regardless of whether the ref is zero or not. Fixes: 295525e29a5b ("virtio_net: merge dma operations when filling mergeable buffers") Reported-by: Michael Roth <michael.roth@amd.com> Closes: http://lore.kernel.org/all/20230926130451.axgodaa6tvwqs3ut@amd.com Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-10-15Merge tag 'usb-6.6-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt fixes from Greg KH: "Here are some USB and Thunderbolt driver fixes for 6.6-rc6 to resolve a number of small reported issues. Included in here are: - thunderbolt driver fixes - xhci driver fixes - cdns3 driver fixes - musb driver fixes - a number of typec driver fixes - a few other small driver fixes All of these have been in linux-next with no reported issues" * tag 'usb-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits) usb: typec: ucsi: Use GET_CAPABILITY attributes data to set power supply scope usb: typec: ucsi: Fix missing link removal usb: typec: altmodes/displayport: Signal hpd low when exiting mode xhci: Preserve RsvdP bits in ERSTBA register correctly xhci: Clear EHB bit only at end of interrupt handler xhci: track port suspend state correctly in unsuccessful resume cases usb: xhci: xhci-ring: Use sysdev for mapping bounce buffer usb: typec: ucsi: Clear EVENT_PENDING bit if ucsi_send_command fails usb: misc: onboard_hub: add support for Microchip USB2412 USB 2.0 hub usb: gadget: udc-xilinx: replace memcpy with memcpy_toio usb: cdns3: Modify the return value of cdns_set_active () to void when CONFIG_PM_SLEEP is disabled usb: dwc3: Soft reset phy on probe for host usb: hub: Guard against accesses to uninitialized BOS descriptors usb: typec: qcom: Update the logic of regulator enable and disable usb: gadget: ncm: Handle decoding of multiple NTB's in unwrap call usb: musb: Get the musb_qh poniter after musb_giveback usb: musb: Modify the "HWVers" register address usb: cdnsp: Fixes issue with dequeuing not queued requests thunderbolt: Restart XDomain discovery handshake after failure thunderbolt: Correct TMU mode initialization from hardware ...
2023-10-15Merge tag 'tty-6.6-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some small tty/serial driver fixes for 6.6-rc6 that resolve some reported issues. Included in here are: - serial core pm runtime fix for issue reported by many - 8250_omap driver fix - rs485 spinlock fix for reported problem - ams-delta bugfix for previous tty api changes in -rc1 that missed this driver that never seems to get built in any test systems All of these have been in linux-next for over a week with no reported problems" * tag 'tty-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: ASoC: ti: ams-delta: Fix cx81801_receive() argument types serial: core: Fix checks for tx runtime PM state serial: 8250_omap: Fix errors with no_console_suspend serial: Reduce spinlocked portion of uart_rs485_config()
2023-10-15Merge tag 'char-misc-6.6-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here is a small set of char/misc and other smaller driver subsystem fixes for 6.6-rc6. Included in here are: - lots of iio driver fixes - binder memory leak fix - mcb driver fixes - counter driver fixes - firmware loader documentation fix - documentation update for embargoed hardware issues All of these have been in linux-next for over a week with no reported issues" * tag 'char-misc-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (22 commits) iio: pressure: ms5611: ms5611_prom_is_valid false negative bug dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes iio: adc: ad7192: Correct reference voltage iio: light: vcnl4000: Don't power on/off chip in config iio: addac: Kconfig: update ad74413r selections iio: pressure: dps310: Adjust Timeout Settings iio: imu: bno055: Fix missing Kconfig dependencies iio: adc: imx8qxp: Fix address for command buffer registers iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data() iio: irsd200: fix -Warray-bounds bug in irsd200_trigger_handler dt-bindings: iio: rohm,bu27010: add missing vdd-supply to example binder: fix memory leaks of spam and pending work firmware_loader: Update contact emails for ABI docs Documentation: embargoed-hardware-issues.rst: Clarify prenotifaction mcb: remove is_added flag from mcb_device struct coresight: tmc-etr: Disable warnings for allocation failures coresight: Fix run time warnings while reusing ETR buffer iio: admv1013: add mixer_vgate corner cases iio: pressure: bmp280: Fix NULL pointer exception iio: dac: ad3552r: Correct device IDs ...
2023-10-15Merge tag 'ovl-fixes-6.6-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs Pull overlayfs fixes from Amir Goldstein: - Various fixes for regressions due to conversion to new mount api in v6.5 - Disable a new mount option syntax (append lowerdir) that was added in v6.5 because we plan to add a different lowerdir append syntax in v6.7 * tag 'ovl-fixes-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs: ovl: temporarily disable appending lowedirs ovl: fix regression in showing lowerdir mount option ovl: fix regression in parsing of mount options with escaped comma fs: factor out vfs_parse_monolithic_sep() helper
2023-10-15Merge tag 'powerpc-6.6-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix softlockup/crash when using hcall tracing - Fix pte_access_permitted() for PAGE_NONE on 8xx - Fix inverted pte_young() test in __ptep_test_and_clear_young() on 64-bit BookE - Fix unhandled math emulation exception on 85xx - Fix kernel crash on syscall return on 476 Thanks to Athira Rajeev, Christophe Leroy, Eddie James, and Naveen N Rao. * tag 'powerpc-6.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/47x: Fix 47x syscall return crash powerpc/85xx: Fix math emulation exception powerpc/64e: Fix wrong test in __ptep_test_and_clear_young() powerpc/8xx: Fix pte_access_permitted() for PAGE_NONE powerpc/pseries: Remove unused r0 in the hcall tracing code powerpc/pseries: Fix STK_PARAM access in the hcall tracing code
2023-10-15Merge tag 'smp-urgent-2023-10-15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull CPU hotplug fix from Ingo Molnar: "Fix a Longsoon build warning by harmonizing the arch_[un]register_cpu() prototypes between architectures" * tag 'smp-urgent-2023-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu-hotplug: Provide prototypes for arch CPU registration
2023-10-14Merge tag '6.6-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbdLinus Torvalds
Pull smb server fixes from Steve French: - Fix for possible double free in RPC read - Add additional check to clarify smb2_open path and quiet Coverity - Fix incorrect error rsp in a compounding path - Fix to properly fail open of file with pending delete on close * tag '6.6-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd: ksmbd: fix potential double free on smb2_read_pipe() error path ksmbd: fix Null pointer dereferences in ksmbd_update_fstate() ksmbd: fix wrong error response status by using set_smb2_rsp_status() ksmbd: not allow to open file if delelete on close bit is set
2023-10-14Merge tag '6.6-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull smb client fixes from Steve French: - fix caching race with open_cached_dir and laundromat cleanup of cached dirs (addresses a problem spotted with xfstest run with directory leases enabled) - reduce excessive resource usage of laundromat threads * tag '6.6-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: smb: client: prevent new fids from being removed by laundromat smb: client: make laundromat a delayed worker
2023-10-14Merge tag 'x86-urgent-2023-10-15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Fix a false-positive KASAN warning, fix an AMD erratum on Zen4 CPUs, and fix kernel-doc build warnings" * tag 'x86-urgent-2023-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/alternatives: Disable KASAN in apply_alternatives() x86/cpu: Fix AMD erratum #1485 on Zen4-based CPUs x86/resctrl: Fix kernel-doc warnings
2023-10-14Merge tag 'sched-urgent-2023-10-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Two EEVDF fixes" * tag 'sched-urgent-2023-10-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/eevdf: Fix pick_eevdf() sched/eevdf: Fix min_deadline heap integrity
2023-10-14Merge tag 'perf-urgent-2023-10-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 perf event fix from Ingo Molnar: "Fix an LBR sampling bug" * tag 'perf-urgent-2023-10-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/lbr: Filter vsyscall addresses
2023-10-14ovl: temporarily disable appending lowedirsAmir Goldstein
Kernel v6.5 converted overlayfs to new mount api. As an added bonus, it also added a feature to allow appending lowerdirs using lowerdir=:/lower2,lowerdir=::/data3 syntax. This new syntax has raised some concerns regarding escaping of colons. We decided to try and disable this syntax, which hasn't been in the wild for so long and introduce it again in 6.7 using explicit mount options lowerdir+=/lower2,datadir+=/data3. Suggested-by: Miklos Szeredi <miklos@szeredi.hu> Link: https://lore.kernel.org/r/CAJfpegsr3A4YgF2YBevWa6n3=AcP7hNndG6EPMu3ncvV-AM71A@mail.gmail.com/ Fixes: b36a5780cb44 ("ovl: modify layer parameter parsing") Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-10-14Merge tag 'xfs-6.6-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull xfs fixes from Chandan Babu: - Fix calculation of offset of AG's last block and its length - Update incore AG block count when shrinking an AG - Process free extents to busy list in FIFO order - Make XFS report its i_version as the STATX_CHANGE_COOKIE * tag 'xfs-6.6-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: reinstate the old i_version counter as STATX_CHANGE_COOKIE xfs: Remove duplicate include xfs: correct calculation for agend and blockcount xfs: process free extents to busy list in FIFO order xfs: adjust the incore perag block_count when shrinking
2023-10-14ovl: fix regression in showing lowerdir mount optionAmir Goldstein
Before commit b36a5780cb44 ("ovl: modify layer parameter parsing"), spaces and commas in lowerdir mount option value used to be escaped using seq_show_option(). In current upstream, when lowerdir value has a space, it is not escaped in /proc/mounts, e.g.: none /mnt overlay rw,relatime,lowerdir=l l,upperdir=u,workdir=w 0 0 which results in broken output of the mount utility: none on /mnt type overlay (rw,relatime,lowerdir=l) Store the original lowerdir mount options before unescaping and show them using the same escaping used for seq_show_option() in addition to escaping the colon separator character. Fixes: b36a5780cb44 ("ovl: modify layer parameter parsing") Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-10-13Merge tag 'input-for-v6.6-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a reworked way for handling reset delay on SMBus-connected Synaptics touchpads (the original one, while being correct, uncovered an old bug in fallback to PS/2 code that was fixed separately; the new one however avoids having delay in serio port "fast" resume, and instead has the wait in the RMI4 code) - a fix for potential crashes when devices with Elan controllers (and Synaptics) fall back to PS/2 code. Can't be hit without the original patch above, but still good to have it fixed - a couple new device IDs in xpad Xbox driver - another quirk for Goodix driver to deal with stuff vendors put in ACPI tables - a fix for use-after-free on disconnect for powermate driver - a quirk to not initialize PS/2 mouse port on Fujitsu Lifebook E5411 laptop as it makes keyboard not usable and the device uses hid-over-i2c touchpad anyways * tag 'input-for-v6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: powermate - fix use-after-free in powermate_config_complete Input: xpad - add PXN V900 support Input: synaptics-rmi4 - handle reset delay when using SMBus trsnsport Input: psmouse - fix fast_reconnect function for PS/2 mode Revert "Input: psmouse - add delay when deactivating for SMBus mode" Input: goodix - ensure int GPIO is in input for gpio_count == 1 && gpio_int_idx == 0 case Input: i8042 - add Fujitsu Lifebook E5411 to i8042 quirk table Input: xpad - add HyperX Clutch Gladiate Support
2023-10-13Input: powermate - fix use-after-free in powermate_config_completeJavier Carrasco
syzbot has found a use-after-free bug [1] in the powermate driver. This happens when the device is disconnected, which leads to a memory free from the powermate_device struct. When an asynchronous control message completes after the kfree and its callback is invoked, the lock does not exist anymore and hence the bug. Use usb_kill_urb() on pm->config to cancel any in-progress requests upon device disconnection. [1] https://syzkaller.appspot.com/bug?extid=0434ac83f907a1dbdd1e Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Reported-by: syzbot+0434ac83f907a1dbdd1e@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20230916-topic-powermate_use_after_free-v3-1-64412b81a7a2@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-10-13Input: xpad - add PXN V900 supportMatthias Berndt
Add VID and PID to the xpad_device table to allow driver to use the PXN V900 steering wheel, which is XTYPE_XBOX360 compatible in xinput mode. Signed-off-by: Matthias Berndt <matthias_berndt@gmx.de> Link: https://lore.kernel.org/r/4932699.31r3eYUQgx@fedora Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit (git 2.34.1) at 2025-07-16 02:56:58 +0000