| Age | Commit message (Collapse) | Author |
|---|
|
The updated SoundWire Intel driver will need to rely on Extended
HDaudio links for power management, but it doesn't need to be aware of
all the HDaudio structures. Add convenience helpers to avoid polluting
SoundWire drivers too much with HDaudio information.
Since the SoundWire/Intel solution already takes the lock at a higher
level, the _unlocked PM helpers are used.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add helpers to program SPA/CPA bits, using a mutex to access the
shared LCTL register if required.
All links are managed with the same LCTLx.SPA bits. However there are
quite a few implementation details to be aware of:
Legacy HDaudio multi-links are powered-up when exiting reset, which
requires the ref_count to be manually set to one when initializing the
link.
Alternate links for SoundWire/DMIC/SSP need to be explicitly
powered-up before accessing the SHIM/IP/Vendor-Specific SHIM space for
each sublink. DMIC/SSP/SoundWire are all different cases with a
different device/dai/hlink relationship.
SoundWire will handle power management with the auxiliary device
resume/suspend routine. The ref_count is not necessary in this case.
The DMIC/SSP will by contrast handle the power management from DAI
.startup and .shutdown callbacks.
The SSP has a 1:1 mapping between sublink and DAI, but it's
bidirectional so the ref_count will help avoid turning off the sublink
when one of the two directions is still in use.
The DMIC has a single link but two DAIs for data generated at
different sampling frequencies, again the ref_count will make sure the
two DAIs can be used concurrently.
And last the SoundWire Intel require power-up/down and bank switch to
be handled with a lock already taken, so the 'eml_lock' is made
optional with the _unlocked versions of the helpers.
Note that the _check_power_active() implementation is similar to
previous helpers in sound/hda/ext, with sleep duration and timeout
aligned with hardware recommendations. If desired, this helper could
be modified in a second step with .e.g. readl_poll_timeout()
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For backwards compatibility, HDaudio/iDISP links are powered-on when
exiting reset, and the existing driver forces them to be powered-off
when entering S0ix. In addition, the get/put helpers are invoked
directly by the ASoC codec drivers, which a historical layering
violation.
Extended links are powered-on by software only, during the probe and
DAI startup phases. This calls for a different handling of the
'regular' and 'extended' audio links.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Extend hdac_ext_link to store information needed for ALT
links. Follow-up patches will include more functional patches for
power-up and down.
Note that this patch suggests the use of an 'eml_lock' to serialize
access to shared registers. SoundWire-specific sequence require the
lock to be taken at a higher level, as a result the helpers added in
follow-up patches will provide 'unlocked' versions when needed.
Also note that the low-level sequences with the 'hdaml_' prefix are
taken directly from the hardware specifications - naming conventions
included. The code will be split in two, with locking and linked-list
management handled separately to avoid mixing required hardware setup
and Linux-based resource management.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some of the functions will be used for SoundWire enumeration and power
management, to avoid cycles in module dependencies and simplify
integration all the HDaudio multi-link needs to move to a dedicated
module.
Drop no longer needed headers at the same time.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add return value - this will need additional work in the caller.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use list_for_each_entry_safe() instead of open-coding.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add new definitions for the HDaudio Extended link support,
specifically new registers for SoundWire, Intel DMIC and INTEL SSP
interfaces.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add description of 'Skylake' multi-link structure added in 2015 and
recent extensions to support SoundWire/DMIC/SSP interfaces.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:
Click/Pop Noise was a long pending issue with WSA Codecs which are prone
to accumlate DC when ports are active but without any data streams.
There are multiple places in the current setup, where this could happen
in both startup as well as shutdown path.
|
|
unpreparing/disabling and preparing/reenabling soundwire ports is not required
for every prepare call, this add lots of click and pop noise if we do this in
middle of playback or capture.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230323164403.6654-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On multiple prepare calls, its possible that the playback graphs are
not unloaded from the DSP, which can have some wierd side-effects,
one of them is that the data not consumed without any errors.
Fixes: c2ac3aec474d("ASoC: qcom: q6apm-lpass-dai: unprepare stream if its already prepared")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230323164403.6654-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This is the initial codec driver for rt712 SDCA (Mic topology).
The host should connect with rt712 SdW2 interface.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20230406085535.52002-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dapm_connect_dai_pair() handles
"Normal/Codec2Codec" x "CPU/Codec" x "Playback/Capture".
(A) is "Codec2Codec" case of "CPU" widget x "Playback/Capture",
(B) is "Normal" case of "CPU" widget x "Playback/Capture",
(C) is each case of "Codec" widget.
(X) is handling "Playback" case DAI connecting,
(Y) is handling "Capture" case DAI connecting.
static void dapm_connect_dai_pair(...)
{
...
(A) if (dai_link->params) {
playback_cpu = ...
capture_cpu = ...
(B) } else {
playback_cpu = ...
capture_cpu = ...
}
^ /* connect BE DAI playback if widgets are valid */
| stream = SNDRV_PCM_STREAM_PLAYBACK;
| (C) codec = codec_dai->playback_widget;
|
| if (playback_cpu && codec) {
(X) if (dai_link->params && !rtd->c2c_widget[stream]) {
| ...
| }
|
| (z) dapm_connect_dai_routes(...);
v }
capture:
^ /* connect BE DAI capture if widgets are valid */
| stream = SNDRV_PCM_STREAM_CAPTURE;
| (C) codec = codec_dai->capture_widget;
|
| if (codec && capture_cpu) {
(Y) if (dai_link->params && !rtd->c2c_widget[stream]) {
| ...
| }
|
| (z) dapm_connect_dai_routes(...);
v }
}
(X) part and (Y) part are almost same.
Main purpose of these parts (and this function) is calling
dapm_connect_dai_routes() (= z) on each cases.
The difference is "parameter"
(= Normal/Codec2Codec x CPU/Codec x Playback/Capture).
This patch cleanup these, but nothing changed for meaning.
Link: https://lore.kernel.org/r/87ilen6ni4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877cuqvswc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
ASoC is supporting Codec2Codec, but its parameter name is
"params" and "num_params" which are very unclear naming.
This patch-set clarifies it by replacing to c2c_params / num_c2c_params.
|
|
Convert the WM8510 audio CODEC bindings to DT schema
Signed-off-by: Saalim Quadri <danascape@gmail.com>
Link: https://lore.kernel.org/r/20230405111605.5250-1-danascape@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
No drivers are using params/num_params any more.
Let's remove these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87iledc2ke.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ASoC is now using c2c_params instead of params. This patch replace it.
num_c2c_params (was num_params) was not mandatory before,
but let's set it by this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87jzytc2kp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ASoC is now using c2c_params instead of params. This patch replace it.
num_c2c_params (was num_params) was not mandatory before,
but let's set it by this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lej9c2ky.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ASoC is now using c2c_params instead of params. This patch replace it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87mt3pc2la.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_soc_dai_link has params/num_params, but it is unclear that
params for what. This patch clarify it is params for Codec2Codec.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o7o5c2lk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the AK4458 audio DAC bindings to DT schema.
Signed-off-by: Saalim Quadri <danascape@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230328091831.55690-1-danascape@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
This series will add support for SOF Linux stack to run without using the DSP.
DSPless mode provides a good tool for verification that the hardware itself
works correctly by taking the DSP use out from the picture.
It can only work with interfaces which supports this mode: Intel HDA at the
moment but with LNL it could be possible to support other audio interfaces.
The main driver for this mode is to be able to test programming sequences,
low-level code and for low-level verification of a platform.
The feature is not targetted for end-users and it will not make the SOF stack
to work on hardware without DSP, but it is giving us a tool to debug and enable
platforms earlier (when for example t he firmware is not mature enough).
|
|
Smatch Warns:
sound/soc/tegra/tegra20_ac97.c:321 tegra20_ac97_platform_probe()
warn: missing unwind goto?
The goto will set the "soc_ac97_ops" and "soc_ac97_bus" operations to
NULL. But they are already NULL at this point so it is a no-op.
However, just for consistency, change the direct return to a goto. No
functional change.
Signed-off-by: Zihao Wang <u202012060@hust.edu.cn>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/20230404084622.1202-1-u202012060@hust.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
set the dspless_mode_supported flag to true for tgl/adl family to allow
DSPless mode.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-13-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
set the dspless_mode_supported flag to true for skl family to allow
DSPless mode.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-12-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
set the dspless_mode_supported flag to true for mtl family to allow
DSPless mode.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
set the dspless_mode_supported flag to true for icl/jsl family to allow
DSPless mode.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
set the dspless_mode_supported flag to true for cnl/cfl/cml family to
allow DSPless mode.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
set the dspless_mode_supported flag to true for apl family to allow
DSPless mode.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When the DSP is disabled in the BIOS, the DSP_BAR and PP_BAR cannot be
accessed.
One possible objection noted in initial reviews is that this patch
adds a number of branches. However the number of branches is actually
limited in probe/suspend/resume routines mostly, so there isn't really
a degradation in terms of readability and maintainability. Adding yet
another level of abstraction/ops/callbacks would increase complexity
and not really help in terms of code reuse or readability and
maintainability. A split between controller and DSP driver would be
even more invasive.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Via the SOF_DBG_DSPLESS_MODE sof_debug flag the SOF stack can be asked to
not use the DSP for audio.
The use of DSPless mode is governed by the sdev->dspless_mode_selected
flag which is only going to be set if the user sets sof_debug=0x8000 and
the platform advertises that the DSPless mode is supported on them.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Not all interfaces (SSP/DMIC/HDA/SDW) are available on all platforms.
If the interface is not even supported then there is no point in executing
a probe or query for that interface.
Introduce a simple function (hda_get_interface_mask) to query the
interfaces supported on the platform.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Via the SOF_DBG_DSPLESS_MODE sof_debug flag the SOF stack can be asked to
not use the DSP for audio.
The core's support for DSPless mode is only going to be enabled if the
platform reports that it can be used without DSP.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The DSPless mode of the ASoC/SOF driver can be used for hardware
verification and debug on platforms with HDaudio codecs. The DSP mode is
still needed on existing platforms for SSP, DMIC, SoundWire interfaces
managed by the GP-DMA.
This mode is also helpful to compare the legacy HDaudio driver with the
ASoC/SOF driver wrt. codec management and handling. In theory we use the
same code but differences are sometimes seen on jack detection and event
handling.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Only access hext_stream->hstream after it has been checked for NULL pointer
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There are many log messages scattered throughout the mt8186 sound
drivers, and they are frequently triggered.
To avoid spamming the console, move these messages to the debug level.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Link: https://lore.kernel.org/r/20230329080418.1100-1-allen-kh.cheng@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Under snd_sof_dev device scope, create platform device for dmic
codec.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/168050621098.26.7486882101201297853@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Refactor error checks code in probe() callback.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230403071651.919027-5-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move get_chip_info callback to the start of API.
This should be first check in probe() call.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230403071651.919027-4-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove unused variables - i2s_mode, i2s_pin_config_offset from code.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230403071651.919027-3-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ACP SOF driver supports different audio configurations.
Explicit condition check for I2S configuration will break
other audio endpoint configurations.
acp_dai_probe() function is not required as we have
machine select logic to select the exact machine.
Remove acp_dai_probe() from existing AMD PCI driver code base.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230403071651.919027-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
During initial SOF driver bring up on AMD platforms, only DMIC
support was added. As of today, we have a complete SOF solution for
I2S endpoints along with DMIC endpoint.
This code is no longer required.
Remove unused code from RMB and RN platform ACP PCI driver.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230403071651.919027-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the Maxim Integrated MAX98371 audio codec bindings to DT schema.
Signed-off-by: André Morishita <andremorishita@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230401181930.533067-1-andremorishita@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This model requires an additional detection quirk to enable the internal microphone.
Signed-off-by: Prajna Sariputra <putr4.s@gmail.com>
Link: https://lore.kernel.org/r/2283110.ElGaqSPkdT@n0067ax-linux62
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The file named 'controls' in the DSP's debugfs root contains a
formatted table describing the controls defined within the loaded DSP
firmware, it is of the form
name: len region:offset addr fwname algid ctltype flags en dirty
Where flags is represented as a character for each flag if set, or '-',
enabled is whether the control is enabled or disabled and dirty is
whether the control value is set in the cache but not the hardware.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230328131018.6820-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Updating the clock source from ACLK to default clock
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Link: https://lore.kernel.org/r/20230331052102.2211115-1-Syed.SabaKareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add dt-bindings information for Analog Devices MAX98363 SoundWire Amplifier
Signed-off-by: Ryan Lee <ryans.lee@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230330234319.6841-2-ryan.lee.analog@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Added Analog Devices MAX98363 SoundWire Amplifier Driver.
The MAX98363 is a SoundWire peripheral device that supports
MIPI SoundWire v1.2-compatible digital interface for audio and
control data.
Signed-off-by: Ryan Lee <ryans.lee@analog.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230330234319.6841-1-ryan.lee.analog@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Several devices (e.g. SC8280XP and SM8450) expect a NPL (Near Pad Logic)
clock. Add the clock and customize allowed clocks per each variant.
The clocks are also required by ADSP in all variants.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230330113405.55722-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
