summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-03-09misc: ad525x_dpot-i2c: Convert to i2c's .probe_new()Uwe Kleine-König
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/lkml/20221118224540.619276-483-uwe@kleine-koenig.org Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-03-10Merge tag 'drm-msm-fixes-2023-03-09' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-fixes msm-fixes for v6.3-rc2 - Fix for possible invalid ptr free in submit ioctl syncobj cleanup path. - Synchronize GMU removal in driver teardown path - a5xx preemption fixes - Fix runpm imbalance at unbind - DPU hw catalog fixes: - set DPU_MDP_PERIPH_0_REMOVED for sc8280xp as this is another chipset where the PERIPH_0 block of registers is not there - fix the DPU features supported in QCM2290 by comparing it with the downstream device tree - fix the length of registers in the sc7180_ctl from 0xe4 to 0x1dc - fix the max mixer line width for sm6115 and qcm2290 chipsets in the DPU catalog - fix the scaler version on sm8550, sc8280xp, sm8450, sm8250, sm8350 and sm6115. This was incorrectly populated on the SW version of the scaler library and not the scaler HW version - Drop dim layer support for msm8998 as its not indicated to be supported in the downstream DTSI - fix the DPU_CLK_CTRL bits for msm 8998 sspp blocks - Use DPU_CLK_CTRL_DMA* prefix instead of DPU_CLK_CTRL_CURSOR* for all chipsets for the DMA sspp blocks - fix the ping-pong block base address for sc7280 in the DPU HW catalog - Fix stack corruption issue in the dpu_hw_ctl_setup_blendstage() function as it was causing a negative left shift by protecting against an invalid index - Clear the DSPP reservations in dpu_rm_release(). This was missed out and as as result the DSPP was not released from the resource manager global state. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvH+VH_Wx3mFMG51CMnoiU06CM-+-WMhM73M42Qx7Bp4A@mail.gmail.com
2023-03-10mailmap: add mailmap entries for Faith.Dave Airlie
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2023-03-09Merge tag 'net-6.3-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from netfilter and bpf. Current release - regressions: - core: avoid skb end_offset change in __skb_unclone_keeptruesize() - sched: - act_connmark: handle errno on tcf_idr_check_alloc - flower: fix fl_change() error recovery path - ieee802154: prevent user from crashing the host Current release - new code bugs: - eth: bnxt_en: fix the double free during device removal - tools: ynl: - fix enum-as-flags in the generic CLI - fully inherit attrs in subsets - re-license uniformly under GPL-2.0 or BSD-3-clause Previous releases - regressions: - core: use indirect calls helpers for sk_exit_memory_pressure() - tls: - fix return value for async crypto - avoid hanging tasks on the tx_lock - eth: ice: copy last block omitted in ice_get_module_eeprom() Previous releases - always broken: - core: avoid double iput when sock_alloc_file fails - af_unix: fix struct pid leaks in OOB support - tls: - fix possible race condition - fix device-offloaded sendpage straddling records - bpf: - sockmap: fix an infinite loop error - test_run: fix &xdp_frame misplacement for LIVE_FRAMES - fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR - netfilter: tproxy: fix deadlock due to missing BH disable - phylib: get rid of unnecessary locking - eth: bgmac: fix *initial* chip reset to support BCM5358 - eth: nfp: fix csum for ipsec offload - eth: mtk_eth_soc: fix RX data corruption issue Misc: - usb: qmi_wwan: add telit 0x1080 composition" * tag 'net-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits) tools: ynl: fix enum-as-flags in the generic CLI tools: ynl: move the enum classes to shared code net: avoid double iput when sock_alloc_file fails af_unix: fix struct pid leaks in OOB support eth: fealnx: bring back this old driver net: dsa: mt7530: permit port 5 to work without port 6 on MT7621 SoC net: microchip: sparx5: fix deletion of existing DSCP mappings octeontx2-af: Unlock contexts in the queue context cache in case of fault detection net/smc: fix fallback failed while sendmsg with fastopen ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause mailmap: update entries for Stephen Hemminger mailmap: add entry for Maxim Mikityanskiy nfc: change order inside nfc_se_io error path ethernet: ice: avoid gcc-9 integer overflow warning ice: don't ignore return codes in VSI related code ice: Fix DSCP PFC TLV creation net: usb: qmi_wwan: add Telit 0x1080 composition net: usb: cdc_mbim: avoid altsetting toggling for Telit FE990 netfilter: conntrack: adopt safer max chain length net: tls: fix device-offloaded sendpage straddling records ...
2023-03-09Merge tag 'for-linus-2023030901' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Benjamin Tissoires: - fix potential out of bound write of zeroes in HID core with a specially crafted uhid device (Lee Jones) - fix potential use-after-free in work function in intel-ish-hid (Reka Norman) - selftests config fixes (Benjamin Tissoires) - few device small fixes and support * tag 'for-linus-2023030901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: intel-ish-hid: ipc: Fix potential use-after-free in work function HID: logitech-hidpp: Add support for Logitech MX Master 3S mouse HID: cp2112: Fix driver not registering GPIO IRQ chip as threaded selftest: hid: fix hid_bpf not set in config HID: uhid: Over-ride the default maximum data buffer value with our own HID: core: Provide new max_buffer_size attribute to over-ride the default
2023-03-09Merge tag 'm68k-for-v6.3-tag2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k fixes from Geert Uytterhoeven: - Fix systems with memory at end of 32-bit address space - Fix initrd on systems where memory does not start at address zero - Fix 68030 handling of bus errors for addresses in exception tables * tag 'm68k-for-v6.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Only force 030 bus error if PC not in exception table m68k: mm: Move initrd phys_to_virt handling after paging_init() m68k: mm: Fix systems with memory at end of 32-bit address space
2023-03-09sh: sanitize the flags on sigreturnAl Viro
We fetch %SR value from sigframe; it might have been modified by signal handler, so we can't trust it with any bits that are not modifiable in user mode. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Rich Felker <dalias@libc.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-03-09io_uring: silence variable ‘prev’ set but not used warningJens Axboe
If io_uring.o is built with W=1, it triggers a warning: io_uring/io_uring.c: In function ‘__io_submit_flush_completions’: io_uring/io_uring.c:1502:40: warning: variable ‘prev’ set but not used [-Wunused-but-set-variable] 1502 | struct io_wq_work_node *node, *prev; | ^~~~ which is due to the wq_list_for_each() iterator always keeping a 'prev' variable. Most users need this to remove an entry from a list, for example, but __io_submit_flush_completions() never does that. Add a basic helper that doesn't track prev instead, and use that in that function. Reported-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com> Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-09io_uring/uring_cmd: ensure that device supports IOPOLLJens Axboe
It's possible for a file type to support uring commands, but not pollable ones. Hence before issuing one of those, we should check that it is supported and error out upfront if it isn't. Cc: stable@vger.kernel.org Fixes: 5756a3a7e713 ("io_uring: add iopoll infrastructure for io_uring_cmd") Link: https://github.com/axboe/liburing/issues/816 Reviewed-by: Kanchan Joshi <joshi.k@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-09erofs: use wrapper i_blocksize() in erofs_file_read_iter()Yue Hu
linux/fs.h has a wrapper for this operation. Signed-off-by: Yue Hu <huyue2@coolpad.com> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Reviewed-by: Chao Yu <chao@kernel.org> Link: https://lore.kernel.org/r/20230306075527.1338-1-zbestahu@gmail.com Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2023-03-09erofs: get rid of a useless DBG_BUGONGao Xiang
`err` could be -EINTR and it should not be the case. Actually such DBG_BUGON is useless. Reviewed-by: Chao Yu <chao@kernel.org> Link: https://lore.kernel.org/r/20230309053148.9223-2-hsiangkao@linux.alibaba.com Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2023-03-09erofs: Revert "erofs: fix kvcalloc() misuse with __GFP_NOFAIL"Gao Xiang
Let's revert commit 12724ba38992 ("erofs: fix kvcalloc() misuse with __GFP_NOFAIL") since kvmalloc() already supports __GFP_NOFAIL in commit a421ef303008 ("mm: allow !GFP_KERNEL allocations for kvmalloc"). So the original fix was wrong. Actually there was some issue as [1] discussed, so before that mm fix is landed, the warn could still happen but applying this commit first will cause less. [1] https://lore.kernel.org/r/20230305053035.1911-1-hsiangkao@linux.alibaba.com Fixes: 12724ba38992 ("erofs: fix kvcalloc() misuse with __GFP_NOFAIL") Reviewed-by: Chao Yu <chao@kernel.org> Link: https://lore.kernel.org/r/20230309053148.9223-1-hsiangkao@linux.alibaba.com Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2023-03-09erofs: fix wrong kunmap when using LZMA on HIGHMEM platformsGao Xiang
As the call trace shown, the root cause is kunmap incorrect pages: BUG: kernel NULL pointer dereference, address: 00000000 CPU: 1 PID: 40 Comm: kworker/u5:0 Not tainted 6.2.0-rc5 #4 Workqueue: erofs_worker z_erofs_decompressqueue_work EIP: z_erofs_lzma_decompress+0x34b/0x8ac z_erofs_decompress+0x12/0x14 z_erofs_decompress_queue+0x7e7/0xb1c z_erofs_decompressqueue_work+0x32/0x60 process_one_work+0x24b/0x4d8 ? process_one_work+0x1a4/0x4d8 worker_thread+0x14c/0x3fc kthread+0xe6/0x10c ? rescuer_thread+0x358/0x358 ? kthread_complete_and_exit+0x18/0x18 ret_from_fork+0x1c/0x28 ---[ end trace 0000000000000000 ]--- The bug is trivial and should be fixed now. It has no impact on !HIGHMEM platforms. Fixes: 622ceaddb764 ("erofs: lzma compression support") Cc: <stable@vger.kernel.org> # 5.16+ Reviewed-by: Yue Hu <huyue2@coolpad.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Link: https://lore.kernel.org/r/20230305134455.88236-1-hsiangkao@linux.alibaba.com
2023-03-09erofs: mark z_erofs_lzma_init/erofs_pcpubuf_init w/ __initYangtao Li
They are used during the erofs module init phase. Let's mark it as __init like any other function. Signed-off-by: Yangtao Li <frank.li@vivo.com> Reviewed-by: Yue Hu <huyue2@coolpad.com> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Reviewed-by: Chao Yu <chao@kernel.org> Link: https://lore.kernel.org/r/20230303063731.66760-1-frank.li@vivo.com Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2023-03-09Merge branch '100GbE' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-03-07 (ice) This series contains updates to ice driver only. Dave removes masking from pfcena field as it was incorrectly preventing valid traffic classes from being enabled. Michal resolves various smatch issues such as not propagating error codes and returning 0 explicitly. Arnd Bergmann resolves gcc-9 warning for integer overflow. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ethernet: ice: avoid gcc-9 integer overflow warning ice: don't ignore return codes in VSI related code ice: Fix DSCP PFC TLV creation ==================== Link: https://lore.kernel.org/r/20230307220714.3997294-1-anthony.l.nguyen@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-09fs/locks: Remove redundant assignment to cmdJiapeng Chong
Variable 'cmd' set but not used. fs/locks.c:2428:3: warning: Value stored to 'cmd' is never read. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4439 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-03-09splice: Remove redundant assignment to retJiapeng Chong
The variable ret belongs to redundant assignment and can be deleted. fs/splice.c:940:2: warning: Value stored to 'ret' is never read. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4406 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-03-09staging: r8188eu: delete driverGreg Kroah-Hartman
Now that the same hardware that the r8188eu driver supported is supported by the real wireless driver rtl8xxxu, the r8188eu driver can be deleted. Also the rtl8xxxu driver supports way more devices, and is a fraction of the overall size, making this a much better overall solution. Thanks to the r8188eu developers and maintainers and reviewers over the years, your work allowed Linux users to use their hardware before the real driver was implemented properly. Reported-by: Hans de Goede <hdegoede@redhat.com> Cc: Phillip Potter <phil@philpotter.co.uk> Cc: Pavel Skripkin <paskripkin@gmail.com> Acked-by: Larry Finger <LarryFinger@lwfinger.net> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Martin Kaiser <martin@kaiser.cx> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Acked-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20230308131934.380395-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-08Merge branch 'tools-ynl-fix-enum-as-flags-in-the-generic-cli'Jakub Kicinski
Jakub Kicinski says: ==================== tools: ynl: fix enum-as-flags in the generic CLI The CLI needs to use proper classes when looking at Enum definitions rather than interpreting the YAML spec ad-hoc, because we have more than on format of the definition supported. ==================== Link: https://lore.kernel.org/r/20230308003923.445268-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-08tools: ynl: fix enum-as-flags in the generic CLIJakub Kicinski
Lorenzo points out that the generic CLI is broken for the netdev family. When I added the support for documentation of enums (and sparse enums) the client script was not updated. It expects the values in enum to be a list of names, now it can also be a dict (YAML object). Reported-by: Lorenzo Bianconi <lorenzo@kernel.org> Fixes: e4b48ed460d3 ("tools: ynl: add a completely generic client") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-08tools: ynl: move the enum classes to shared codeJakub Kicinski
Move bulk of the EnumSet and EnumEntry code to shared code for reuse by cli. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-08net: avoid double iput when sock_alloc_file failsThadeu Lima de Souza Cascardo
When sock_alloc_file fails to allocate a file, it will call sock_release. __sys_socket_file should then not call sock_release again, otherwise there will be a double free. [ 89.319884] ------------[ cut here ]------------ [ 89.320286] kernel BUG at fs/inode.c:1764! [ 89.320656] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 89.321051] CPU: 7 PID: 125 Comm: iou-sqp-124 Not tainted 6.2.0+ #361 [ 89.321535] RIP: 0010:iput+0x1ff/0x240 [ 89.321808] Code: d1 83 e1 03 48 83 f9 02 75 09 48 81 fa 00 10 00 00 77 05 83 e2 01 75 1f 4c 89 ef e8 fb d2 ba 00 e9 80 fe ff ff c3 cc cc cc cc <0f> 0b 0f 0b e9 d0 fe ff ff 0f 0b eb 8d 49 8d b4 24 08 01 00 00 48 [ 89.322760] RSP: 0018:ffffbdd60068bd50 EFLAGS: 00010202 [ 89.323036] RAX: 0000000000000000 RBX: ffff9d7ad3cacac0 RCX: 0000000000001107 [ 89.323412] RDX: 000000000003af00 RSI: 0000000000000000 RDI: ffff9d7ad3cacb40 [ 89.323785] RBP: ffffbdd60068bd68 R08: ffffffffffffffff R09: ffffffffab606438 [ 89.324157] R10: ffffffffacb3dfa0 R11: 6465686361657256 R12: ffff9d7ad3cacb40 [ 89.324529] R13: 0000000080000001 R14: 0000000080000001 R15: 0000000000000002 [ 89.324904] FS: 00007f7b28516740(0000) GS:ffff9d7aeb1c0000(0000) knlGS:0000000000000000 [ 89.325328] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 89.325629] CR2: 00007f0af52e96c0 CR3: 0000000002a02006 CR4: 0000000000770ee0 [ 89.326004] PKRU: 55555554 [ 89.326161] Call Trace: [ 89.326298] <TASK> [ 89.326419] __sock_release+0xb5/0xc0 [ 89.326632] __sys_socket_file+0xb2/0xd0 [ 89.326844] io_socket+0x88/0x100 [ 89.327039] ? io_issue_sqe+0x6a/0x430 [ 89.327258] io_issue_sqe+0x67/0x430 [ 89.327450] io_submit_sqes+0x1fe/0x670 [ 89.327661] io_sq_thread+0x2e6/0x530 [ 89.327859] ? __pfx_autoremove_wake_function+0x10/0x10 [ 89.328145] ? __pfx_io_sq_thread+0x10/0x10 [ 89.328367] ret_from_fork+0x29/0x50 [ 89.328576] RIP: 0033:0x0 [ 89.328732] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 89.329073] RSP: 002b:0000000000000000 EFLAGS: 00000202 ORIG_RAX: 00000000000001a9 [ 89.329477] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00007f7b28637a3d [ 89.329845] RDX: 00007fff4e4318a8 RSI: 00007fff4e4318b0 RDI: 0000000000000400 [ 89.330216] RBP: 00007fff4e431830 R08: 00007fff4e431711 R09: 00007fff4e4318b0 [ 89.330584] R10: 0000000000000000 R11: 0000000000000202 R12: 00007fff4e441b38 [ 89.330950] R13: 0000563835e3e725 R14: 0000563835e40d10 R15: 00007f7b28784040 [ 89.331318] </TASK> [ 89.331441] Modules linked in: [ 89.331617] ---[ end trace 0000000000000000 ]--- Fixes: da214a475f8b ("net: add __sys_socket_file()") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230307173707.468744-1-cascardo@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-08af_unix: fix struct pid leaks in OOB supportEric Dumazet
syzbot reported struct pid leak [1]. Issue is that queue_oob() calls maybe_add_creds() which potentially holds a reference on a pid. But skb->destructor is not set (either directly or by calling unix_scm_to_skb()) This means that subsequent kfree_skb() or consume_skb() would leak this reference. In this fix, I chose to fully support scm even for the OOB message. [1] BUG: memory leak unreferenced object 0xffff8881053e7f80 (size 128): comm "syz-executor242", pid 5066, jiffies 4294946079 (age 13.220s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff812ae26a>] alloc_pid+0x6a/0x560 kernel/pid.c:180 [<ffffffff812718df>] copy_process+0x169f/0x26c0 kernel/fork.c:2285 [<ffffffff81272b37>] kernel_clone+0xf7/0x610 kernel/fork.c:2684 [<ffffffff812730cc>] __do_sys_clone+0x7c/0xb0 kernel/fork.c:2825 [<ffffffff849ad699>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff849ad699>] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 [<ffffffff84a0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 314001f0bf92 ("af_unix: Add OOB support") Reported-by: syzbot+7699d9e5635c10253a27@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Rao Shoaib <rao.shoaib@oracle.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230307164530.771896-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-08eth: fealnx: bring back this old driverJakub Kicinski
This reverts commit d5e2d038dbece821f1af57acbeded3aa9a1832c1. We have a report of this chip being used on a SURECOM EP-320X-S 100/10M Ethernet PCI Adapter which could still have been purchased in some parts of the world 3 years ago. Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=217151 Fixes: d5e2d038dbec ("eth: fealnx: delete the driver for Myson MTD-800") Link: https://lore.kernel.org/r/20230307171930.4008454-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-08net: dsa: mt7530: permit port 5 to work without port 6 on MT7621 SoCVladimir Oltean
The MT7530 switch from the MT7621 SoC has 2 ports which can be set up as internal: port 5 and 6. Arınç reports that the GMAC1 attached to port 5 receives corrupted frames, unless port 6 (attached to GMAC0) has been brought up by the driver. This is true regardless of whether port 5 is used as a user port or as a CPU port (carrying DSA tags). Offline debugging (blind for me) which began in the linked thread showed experimentally that the configuration done by the driver for port 6 contains a step which is needed by port 5 as well - the write to CORE_GSWPLL_GRP2 (note that I've no idea as to what it does, apart from the comment "Set core clock into 500Mhz"). Prints put by Arınç show that the reset value of CORE_GSWPLL_GRP2 is RG_GSWPLL_POSDIV_500M(1) | RG_GSWPLL_FBKDIV_500M(40) (0x128), both on the MCM MT7530 from the MT7621 SoC, as well as on the standalone MT7530 from MT7623NI Bananapi BPI-R2. Apparently, port 5 on the standalone MT7530 can work under both values of the register, while on the MT7621 SoC it cannot. The call path that triggers the register write is: mt753x_phylink_mac_config() for port 6 -> mt753x_pad_setup() -> mt7530_pad_clk_setup() so this fully explains the behavior noticed by Arınç, that bringing port 6 up is necessary. The simplest fix for the problem is to extract the register writes which are needed for both port 5 and 6 into a common mt7530_pll_setup() function, which is called at mt7530_setup() time, immediately after switch reset. We can argue that this mirrors the code layout introduced in mt7531_setup() by commit 42bc4fafe359 ("net: mt7531: only do PLL once after the reset"), in that the PLL setup has the exact same positioning, and further work to consolidate the separate setup() functions is not hindered. Testing confirms that: - the slight reordering of writes to MT7530_P6ECR and to CORE_GSWPLL_GRP1 / CORE_GSWPLL_GRP2 introduced by this change does not appear to cause problems for the operation of port 6 on MT7621 and on MT7623 (where port 5 also always worked) - packets sent through port 5 are not corrupted anymore, regardless of whether port 6 is enabled by phylink or not (or even present in the device tree) My algorithm for determining the Fixes: tag is as follows. Testing shows that some logic from mt7530_pad_clk_setup() is needed even for port 5. Prior to commit ca366d6c889b ("net: dsa: mt7530: Convert to PHYLINK API"), a call did exist for all phy_is_pseudo_fixed_link() ports - so port 5 included. That commit replaced it with a temporary "Port 5 is not supported!" comment, and the following commit 38f790a80560 ("net: dsa: mt7530: Add support for port 5") replaced that comment with a configuration procedure in mt7530_setup_port5() which was insufficient for port 5 to work. I'm laying the blame on the patch that claimed support for port 5, although one would have also needed the change from commit c3b8e07909db ("net: dsa: mt7530: setup core clock even in TRGMII mode") for the write to be performed completely independently from port 6's configuration. Thanks go to Arınç for describing the problem, for debugging and for testing. Reported-by: Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/netdev/f297c2c4-6e7c-57ac-2394-f6025d309b9d@arinc9.com/ Fixes: 38f790a80560 ("net: dsa: mt7530: Add support for port 5") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230307155411.868573-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-08Merge tag 'fs_for_v6.3-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull udf fixes from Jan Kara: "Fix bugs in UDF caused by the big pile of changes that went in during the merge window" * tag 'fs_for_v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Warn if block mapping is done for in-ICB files udf: Fix reading of in-ICB files udf: Fix lost writes in udf_adinicb_writepage()
2023-03-08Merge tag 'platform-drivers-x86-v6.3-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "A small set of assorted bug and build/warning fixes" * tag 'platform-drivers-x86-v6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform: mellanox: mlx-platform: Initialize shift variable to 0 platform/x86: int3472: Add GPIOs to Surface Go 3 Board data platform/x86: ISST: Fix kernel documentation warnings platform: x86: MLX_PLATFORM: select REGMAP instead of depending on it platform: mellanox: select REGMAP instead of depending on it platform/x86/intel/tpmi: Fix double free reported by Smatch platform/x86: ISST: Increase range of valid mail box commands platform/x86: dell-ddv: Fix temperature scaling platform/x86: dell-ddv: Fix cache invalidation on resume platform/x86/amd: pmc: remove CONFIG_SUSPEND checks
2023-03-08drm/msm: DEVFREQ_GOV_SIMPLE_ONDEMAND is no longer neededRandy Dunlap
DRM_MSM no longer needs DEVFREQ_GOV_SIMPLE_ONDEMAND (since commit dbd7a2a941b8 ("PM / devfreq: Fix build issues with devfreq disabled") in linux-next), so remove that select from the DRM_MSM Kconfig file. Fixes: 6563f60f14cb ("drm/msm/gpu: Add devfreq tuning debugfs") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Reviewed-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/523353/ Link: https://lore.kernel.org/r/20230220010428.16910-1-rdunlap@infradead.org [rob: tweak commit message to make checkpatch.pl happy] Signed-off-by: Rob Clark <robdclark@chromium.org>
2023-03-08x86/resctl: fix scheduler confusion with 'current'Linus Torvalds
The implementation of 'current' on x86 is very intentionally special: it is a very common thing to look up, and it uses 'this_cpu_read_stable()' to get the current thread pointer efficiently from per-cpu storage. And the keyword in there is 'stable': the current thread pointer never changes as far as a single thread is concerned. Even if when a thread is preempted, or moved to another CPU, or even across an explicit call 'schedule()' that thread will still have the same value for 'current'. It is, after all, the kernel base pointer to thread-local storage. That's why it's stable to begin with, but it's also why it's important enough that we have that special 'this_cpu_read_stable()' access for it. So this is all done very intentionally to allow the compiler to treat 'current' as a value that never visibly changes, so that the compiler can do CSE and combine multiple different 'current' accesses into one. However, there is obviously one very special situation when the currently running thread does actually change: inside the scheduler itself. So the scheduler code paths are special, and do not have a 'current' thread at all. Instead there are _two_ threads: the previous and the next thread - typically called 'prev' and 'next' (or prev_p/next_p) internally. So this is all actually quite straightforward and simple, and not all that complicated. Except for when you then have special code that is run in scheduler context, that code then has to be aware that 'current' isn't really a valid thing. Did you mean 'prev'? Did you mean 'next'? In fact, even if then look at the code, and you use 'current' after the new value has been assigned to the percpu variable, we have explicitly told the compiler that 'current' is magical and always stable. So the compiler is quite free to use an older (or newer) value of 'current', and the actual assignment to the percpu storage is not relevant even if it might look that way. Which is exactly what happened in the resctl code, that blithely used 'current' in '__resctrl_sched_in()' when it really wanted the new process state (as implied by the name: we're scheduling 'into' that new resctl state). And clang would end up just using the old thread pointer value at least in some configurations. This could have happened with gcc too, and purely depends on random compiler details. Clang just seems to have been more aggressive about moving the read of the per-cpu current_task pointer around. The fix is trivial: just make the resctl code adhere to the scheduler rules of using the prev/next thread pointer explicitly, instead of using 'current' in a situation where it just wasn't valid. That same code is then also used outside of the scheduler context (when a thread resctl state is explicitly changed), and then we will just pass in 'current' as that pointer, of course. There is no ambiguity in that case. The fix may be trivial, but noticing and figuring out what went wrong was not. The credit for that goes to Stephane Eranian. Reported-by: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/lkml/20230303231133.1486085-1-eranian@google.com/ Link: https://lore.kernel.org/lkml/alpine.LFD.2.01.0908011214330.3304@localhost.localdomain/ Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Tony Luck <tony.luck@intel.com> Tested-by: Stephane Eranian <eranian@google.com> Tested-by: Babu Moger <babu.moger@amd.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-03-08staging: rtl8723bs: Pass correct parameters to cfg80211_get_bss()Hans de Goede
To last 2 parameters to cfg80211_get_bss() should be of the enum ieee80211_bss_type resp. enum ieee80211_privacy types, which WLAN_CAPABILITY_ESS very much is not. Fix both cfg80211_get_bss() calls in ioctl_cfg80211.c to pass the right parameters. Note that the second call was already somewhat fixed by commenting out WLAN_CAPABILITY_ESS and passing in 0 instead. This was still not entirely correct though since that would limit returned BSS-es to ESS type BSS-es with privacy on. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230306153512.162104-2-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-08staging: rtl8723bs: Fix key-store index handlingHans de Goede
There are 2 issues with the key-store index handling 1. The non WEP key stores can store keys with indexes 0 - BIP_MAX_KEYID, this means that they should be an array with BIP_MAX_KEYID + 1 entries. But some of the arrays where just BIP_MAX_KEYID entries big. While one other array was hardcoded to a size of 6 entries, instead of using the BIP_MAX_KEYID define. 2. The rtw_cfg80211_set_encryption() and wpa_set_encryption() functions index check where checking that the passed in key-index would fit inside both the WEP key store (which only has 4 entries) as well as in the non WEP key stores. This breaks any attempts to set non WEP keys with index 4 or 5. Issue 2. specifically breaks wifi connection with some access points which advertise PMF support. Without this fix connecting to these access points fails with the following wpa_supplicant messages: nl80211: kernel reports: key addition failed wlan0: WPA: Failed to configure IGTK to the driver wlan0: RSN: Failed to configure IGTK wlan0: CTRL-EVENT-DISCONNECTED bssid=... reason=1 locally_generated=1 Fix 1. by using the right size for the key-stores. After this 2. can safely be fixed by checking the right max-index value depending on the used algorithm, fixing wifi not working with some PMF capable APs. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230306153512.162104-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-08staging: rtl8192e: Remove call_usermodehelper starting RadioPower.shPhilipp Hortmann
Remove call_usermodehelper starting /etc/acpi/events/RadioPower.sh that is not available. This script is not part of the kernel and it is not officially available on the www. The result is that this lines are just dead code. Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230301215441.GA14049@matrix-ESPRIMO-P710 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-08staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a scriptPhilipp Hortmann
Remove function _rtl92e_dm_check_ac_dc_power calling a script /etc/acpi/wireless-rtl-ac-dc-power.sh that is not available. This script is not part of the kernel and it is not available on the www. The result is that this function is just dead code. Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230228202857.GA16442@matrix-ESPRIMO-P710 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-08x86/CPU/AMD: Disable XSAVES on AMD family 0x17Andrew Cooper
AMD Erratum 1386 is summarised as: XSAVES Instruction May Fail to Save XMM Registers to the Provided State Save Area This piece of accidental chronomancy causes the %xmm registers to occasionally reset back to an older value. Ignore the XSAVES feature on all AMD Zen1/2 hardware. The XSAVEC instruction (which works fine) is equivalent on affected parts. [ bp: Typos, move it into the F17h-specific function. ] Reported-by: Tavis Ormandy <taviso@gmail.com> Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/20230307174643.1240184-1-andrew.cooper3@citrix.com
2023-03-08io_uring/io-wq: stop setting PF_NO_SETAFFINITY on io-wq workersJens Axboe
Every now and then reports come in that are puzzled on why changing affinity on the io-wq workers fails with EINVAL. This happens because they set PF_NO_SETAFFINITY as part of their creation, as io-wq organizes workers into groups based on what CPU they are running on. However, this is purely an optimization and not a functional requirement. We can allow setting affinity, and just lazily update our worker to wqe mappings. If a given io-wq thread times out, it normally exits if there's no more work to do. The exception is if it's the last worker available. For the timeout case, check the affinity of the worker against group mask and exit even if it's the last worker. New workers should be created with the right mask and in the right location. Reported-by:Daniel Dao <dqminh@cloudflare.com> Link: https://lore.kernel.org/io-uring/CA+wXwBQwgxB3_UphSny-yAP5b26meeOu1W4TwYVcD_+5gOhvPw@mail.gmail.com/ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-08MAINTAINERS: repair a malformed T: entry in IDMAPPED MOUNTSLukas Bulwahn
The T: entries shall be composed of a SCM tree type (git, hg, quilt, stgit or topgit) and location. Add the SCM tree type to the T: entry and reorder the file entries in alphabetical order. Fixes: ddc84c90538e ("MAINTAINERS: update idmapping tree") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-03-08block, bfq: fix uaf for 'stable_merge_bfqq'Yu Kuai
Before commit fd571df0ac5b ("block, bfq: turn bfqq_data into an array in bfq_io_cq"), process reference is read before bfq_put_stable_ref(), and it's safe if bfq_put_stable_ref() put the last reference, because process reference will be 0 and 'stable_merge_bfqq' won't be accessed in this case. However, the commit changed the order and will cause uaf for 'stable_merge_bfqq'. In order to emphasize that bfq_put_stable_ref() can drop the last reference, fix the problem by moving bfq_put_stable_ref() to the end of bfq_setup_stable_merge(). Fixes: fd571df0ac5b ("block, bfq: turn bfqq_data into an array in bfq_io_cq") Reported-and-tested-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://lore.kernel.org/linux-block/20230307071448.rzihxbm4jhbf5krj@shindev/ Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-08SUNRPC: Fix a server shutdown leakBenjamin Coddington
Fix a race where kthread_stop() may prevent the threadfn from ever getting called. If that happens the svc_rqst will not be cleaned up. Fixes: ed6473ddc704 ("NFSv4: Fix callback server shutdown") Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-03-08net: microchip: sparx5: fix deletion of existing DSCP mappingsDaniel Machon
Fix deletion of existing DSCP mappings in the APP table. Adding and deleting DSCP entries are replicated per-port, since the mapping table is global for all ports in the chip. Whenever a mapping for a DSCP value already exists, the old mapping is deleted first. However, it is only deleted for the specified port. Fix this by calling sparx5_dcb_ieee_delapp() instead of dcb_ieee_delapp() as it ought to be. Reproduce: // Map and remap DSCP value 63 $ dcb app add dev eth0 dscp-prio 63:1 $ dcb app add dev eth0 dscp-prio 63:2 $ dcb app show dev eth0 dscp-prio dscp-prio 63:2 $ dcb app show dev eth1 dscp-prio dscp-prio 63:1 63:2 <-- 63:1 should not be there Fixes: 8dcf69a64118 ("net: microchip: sparx5: add support for offloading dscp table") Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-08octeontx2-af: Unlock contexts in the queue context cache in case of fault ↵Suman Ghosh
detection NDC caches contexts of frequently used queue's (Rx and Tx queues) contexts. Due to a HW errata when NDC detects fault/poision while accessing contexts it could go into an illegal state where a cache line could get locked forever. To makesure all cache lines in NDC are available for optimum performance upon fault/lockerror/posion errors scan through all cache lines in NDC and clear the lock bit. Fixes: 4a3581cd5995 ("octeontx2-af: NPA AQ instruction enqueue support") Signed-off-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Sai Krishna <saikrishnag@marvell.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-08net/smc: fix fallback failed while sendmsg with fastopenD. Wythe
Before determining whether the msg has unsupported options, it has been prematurely terminated by the wrong status check. For the application, the general usages of MSG_FASTOPEN likes fd = socket(...) /* rather than connect */ sendto(fd, data, len, MSG_FASTOPEN) Hence, We need to check the flag before state check, because the sock state here is always SMC_INIT when applications tries MSG_FASTOPEN. Once we found unsupported options, fallback it to TCP. Fixes: ee9dfbef02d1 ("net/smc: handle sockopts forcing fallback") Signed-off-by: D. Wythe <alibuda@linux.alibaba.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> v2 -> v1: Optimize code style Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-08selftests/clone3: test clone3 with CLONE_NEWTIMETobias Klauser
Verify that clone3 can be called successfully with CLONE_NEWTIME in flags. Cc: Andrey Vagin <avagin@openvz.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-03-08fork: allow CLONE_NEWTIME in clone3 flagsTobias Klauser
Currently, calling clone3() with CLONE_NEWTIME in clone_args->flags fails with -EINVAL. This is because CLONE_NEWTIME intersects with CSIGNAL. However, CSIGNAL was deprecated when clone3 was introduced in commit 7f192e3cd316 ("fork: add clone3"), allowing re-use of that part of clone flags. Fix this by explicitly allowing CLONE_NEWTIME in clone3_args_valid. This is also in line with the respective check in check_unshare_flags which allow CLONE_NEWTIME for unshare(). Fixes: 769071ac9f20 ("ns: Introduce Time Namespace") Cc: Andrey Vagin <avagin@openvz.org> Cc: Christian Brauner <brauner@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-03-08watch_queue: fix IOC_WATCH_QUEUE_SET_SIZE alloc error pathsDavid Disseldorp
The watch_queue_set_size() allocation error paths return the ret value set via the prior pipe_resize_ring() call, which will always be zero. As a result, IOC_WATCH_QUEUE_SET_SIZE callers such as "keyctl watch" fail to detect kernel wqueue->notes allocation failures and proceed to KEYCTL_WATCH_KEY, with any notifications subsequently lost. Fixes: c73be61cede58 ("pipe: Add general notification queue support") Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-03-07ext4: Fix deadlock during directory renameJan Kara
As lockdep properly warns, we should not be locking i_rwsem while having transactions started as the proper lock ordering used by all directory handling operations is i_rwsem -> transaction start. Fix the lock ordering by moving the locking of the directory earlier in ext4_rename(). Reported-by: syzbot+9d16c39efb5fade84574@syzkaller.appspotmail.com Fixes: 0813299c586b ("ext4: Fix possible corruption when moving a directory") Link: https://syzkaller.appspot.com/bug?extid=9d16c39efb5fade84574 Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230301141004.15087-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-03-07ext4: Fix comment about the 64BIT featureTudor Ambarus
64BIT is part of the incompatible feature set, update the comment accordingly. Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20230301133842.671821-1-tudor.ambarus@linaro.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-03-07docs: ext4: modify the group desc size to 64Wu Bo
Since the default ext4 group desc size is 64 now (assuming that the 64-bit feature is enbled). And the size mentioned in this doc is 64 too. Change it to 64. Signed-off-by: Wu Bo <bo.wu@vivo.com> Acked-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20230222013525.14748-1-bo.wu@vivo.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-03-07ext4: fix another off-by-one fsmap error on 1k block filesystemsDarrick J. Wong
Apparently syzbot figured out that issuing this FSMAP call: struct fsmap_head cmd = { .fmh_count = ...; .fmh_keys = { { .fmr_device = /* ext4 dev */, .fmr_physical = 0, }, { .fmr_device = /* ext4 dev */, .fmr_physical = 0, }, }, ... }; ret = ioctl(fd, FS_IOC_GETFSMAP, &cmd); Produces this crash if the underlying filesystem is a 1k-block ext4 filesystem: kernel BUG at fs/ext4/ext4.h:3331! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 3 PID: 3227965 Comm: xfs_io Tainted: G W O 6.2.0-rc8-achx Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:ext4_mb_load_buddy_gfp+0x47c/0x570 [ext4] RSP: 0018:ffffc90007c03998 EFLAGS: 00010246 RAX: ffff888004978000 RBX: ffffc90007c03a20 RCX: ffff888041618000 RDX: 0000000000000000 RSI: 00000000000005a4 RDI: ffffffffa0c99b11 RBP: ffff888012330000 R08: ffffffffa0c2b7d0 R09: 0000000000000400 R10: ffffc90007c03950 R11: 0000000000000000 R12: 0000000000000001 R13: 00000000ffffffff R14: 0000000000000c40 R15: ffff88802678c398 FS: 00007fdf2020c880(0000) GS:ffff88807e100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd318a5fe8 CR3: 000000007f80f001 CR4: 00000000001706e0 Call Trace: <TASK> ext4_mballoc_query_range+0x4b/0x210 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80] ext4_getfsmap_datadev+0x713/0x890 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80] ext4_getfsmap+0x2b7/0x330 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80] ext4_ioc_getfsmap+0x153/0x2b0 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80] __ext4_ioctl+0x2a7/0x17e0 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80] __x64_sys_ioctl+0x82/0xa0 do_syscall_64+0x2b/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fdf20558aff RSP: 002b:00007ffd318a9e30 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000000200c0 RCX: 00007fdf20558aff RDX: 00007fdf1feb2010 RSI: 00000000c0c0583b RDI: 0000000000000003 RBP: 00005625c0634be0 R08: 00005625c0634c40 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fdf1feb2010 R13: 00005625be70d994 R14: 0000000000000800 R15: 0000000000000000 For GETFSMAP calls, the caller selects a physical block device by writing its block number into fsmap_head.fmh_keys[01].fmr_device. To query mappings for a subrange of the device, the starting byte of the range is written to fsmap_head.fmh_keys[0].fmr_physical and the last byte of the range goes in fsmap_head.fmh_keys[1].fmr_physical. IOWs, to query what mappings overlap with bytes 3-14 of /dev/sda, you'd set the inputs as follows: fmh_keys[0] = { .fmr_device = major(8, 0), .fmr_physical = 3}, fmh_keys[1] = { .fmr_device = major(8, 0), .fmr_physical = 14}, Which would return you whatever is mapped in the 12 bytes starting at physical offset 3. The crash is due to insufficient range validation of keys[1] in ext4_getfsmap_datadev. On 1k-block filesystems, block 0 is not part of the filesystem, which means that s_first_data_block is nonzero. ext4_get_group_no_and_offset subtracts this quantity from the blocknr argument before cracking it into a group number and a block number within a group. IOWs, block group 0 spans blocks 1-8192 (1-based) instead of 0-8191 (0-based) like what happens with larger blocksizes. The net result of this encoding is that blocknr < s_first_data_block is not a valid input to this function. The end_fsb variable is set from the keys that are copied from userspace, which means that in the above example, its value is zero. That leads to an underflow here: blocknr = blocknr - le32_to_cpu(es->s_first_data_block); The division then operates on -1: offset = do_div(blocknr, EXT4_BLOCKS_PER_GROUP(sb)) >> EXT4_SB(sb)->s_cluster_bits; Leaving an impossibly large group number (2^32-1) in blocknr. ext4_getfsmap_check_keys checked that keys[0].fmr_physical and keys[1].fmr_physical are in increasing order, but ext4_getfsmap_datadev adjusts keys[0].fmr_physical to be at least s_first_data_block. This implies that we have to check it again after the adjustment, which is the piece that I forgot. Reported-by: syzbot+6be2b977c89f79b6b153@syzkaller.appspotmail.com Fixes: 4a4956249dac ("ext4: fix off-by-one fsmap error on 1k block filesystems") Link: https://syzkaller.appspot.com/bug?id=79d5768e9bfe362911ac1a5057a36fc6b5c30002 Cc: stable@vger.kernel.org Signed-off-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/Y+58NPTH7VNGgzdd@magnolia Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-03-07ext4: fix RENAME_WHITEOUT handling for inline directoriesEric Whitney
A significant number of xfstests can cause ext4 to log one or more warning messages when they are run on a test file system where the inline_data feature has been enabled. An example: "EXT4-fs warning (device vdc): ext4_dirblock_csum_set:425: inode #16385: comm fsstress: No space for directory leaf checksum. Please run e2fsck -D." The xfstests include: ext4/057, 058, and 307; generic/013, 051, 068, 070, 076, 078, 083, 232, 269, 270, 390, 461, 475, 476, 482, 579, 585, 589, 626, 631, and 650. In this situation, the warning message indicates a bug in the code that performs the RENAME_WHITEOUT operation on a directory entry that has been stored inline. It doesn't detect that the directory is stored inline, and incorrectly attempts to compute a dirent block checksum on the whiteout inode when creating it. This attempt fails as a result of the integrity checking in get_dirent_tail (usually due to a failure to match the EXT4_FT_DIR_CSUM magic cookie), and the warning message is then emitted. Fix this by simply collecting the inlined data state at the time the search for the source directory entry is performed. Existing code handles the rest, and this is sufficient to eliminate all spurious warning messages produced by the tests above. Go one step further and do the same in the code that resets the source directory entry in the event of failure. The inlined state should be present in the "old" struct, but given the possibility of a race there's no harm in taking a conservative approach and getting that information again since the directory entry is being reread anyway. Fixes: b7ff91fd030d ("ext4: find old entry again if failed to rename whiteout") Cc: stable@kernel.org Signed-off-by: Eric Whitney <enwlinux@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230210173244.679890-1-enwlinux@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-03-07ext4: make kobj_type structures constantThomas Weißschuh
Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.") the driver core allows the usage of const struct kobj_type. Take advantage of this to constify the structure definitions to prevent modification at runtime. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230209-kobj_type-ext4-v1-1-6865fb05c1f8@weissschuh.net Signed-off-by: Theodore Ts'o <tytso@mit.edu>
generated by cgit (git 2.34.1) at 2025-07-16 00:08:32 +0000