summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-04-03net: phy: micrel: lan8814: Fix when enabling/disabling 1-step timestampingHoratiu Vultur
There are 2 issues with the blamed commit. 1. When the phy is initialized, it would enable the disabled of UDPv4 checksums. The UDPv6 checksum is already enabled by default. So when 1-step is configured then it would clear these flags. 2. After the 1-step is configured, then if 2-step is configured then the 1-step would be still configured because it is not clearing the flag. So the sync frames will still have origin timestamps set. Fix this by reading first the value of the register and then just change bit 12 as this one determines if the timestamp needs to be inserted in the frame, without changing any other bits. Fixes: ece19502834d ("net: phy: micrel: 1588 support for LAN8814 phy") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Divya Koppera <divya.koppera@microchip.com> Link: https://lore.kernel.org/r/20240402071634.2483524-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-03net: stmmac: fix rx queue priority assignmentPiotr Wejman
The driver should ensure that same priority is not mapped to multiple rx queues. From DesignWare Cores Ethernet Quality-of-Service Databook, section 17.1.29 MAC_RxQ_Ctrl2: "[...]The software must ensure that the content of this field is mutually exclusive to the PSRQ fields for other queues, that is, the same priority is not mapped to multiple Rx queues[...]" Previously rx_queue_priority() function was: - clearing all priorities from a queue - adding new priorities to that queue After this patch it will: - first assign new priorities to a queue - then remove those priorities from all other queues - keep other priorities previously assigned to that queue Fixes: a8f5102af2a7 ("net: stmmac: TX and RX queue priority configuration") Fixes: 2142754f8b9c ("net: stmmac: Add MAC related callbacks for XGMAC2") Signed-off-by: Piotr Wejman <piotrwejman90@gmail.com> Link: https://lore.kernel.org/r/20240401192239.33942-1-piotrwejman90@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-03net: txgbe: fix i2c dev name cannot match clkdevDuanqiang Wen
txgbe clkdev shortened clk_name, so i2c_dev info_name also need to shorten. Otherwise, i2c_dev cannot initialize clock. Fixes: e30cef001da2 ("net: txgbe: fix clk_name exceed MAX_DEV_ID limits") Signed-off-by: Duanqiang Wen <duanqiangwen@net-swift.com> Link: https://lore.kernel.org/r/20240402021843.126192-1-duanqiangwen@net-swift.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-03Merge branch 'net-fec-fix-to-suspend-resume-with-mac_managed_pm'Jakub Kicinski
John Ernberg says: ==================== net: fec: Fix to suspend / resume with mac_managed_pm Since the introduction of mac_managed_pm in the FEC driver there were some discrepancies regarding power management of the PHY. This failed on our board that has a permanently powered Microchip LAN8700R attached to the FEC. Although the root cause of the failure can be traced back to f166f890c8f0 ("net: ethernet: fec: Replace interrupt driven MDIO with polled IO") and probably even before that, we only started noticing the problem going from 5.10 to 6.1. Since 557d5dc83f68 ("net: fec: use mac-managed PHY PM") is actually a fix to most of the power management sequencing problems that came with power managing the MDIO bus which for the FEC meant adding a race with FEC resume (and phy_start() if netif was running) and PHY resume. That it worked before for us was probably just luck... Thanks to Wei's response to my report at [1] I was able to pick up his patch and start honing in on the remaining missing details. [1]: https://lore.kernel.org/netdev/1f45bdbe-eab1-4e59-8f24-add177590d27@actia.se/ v3: https://lore.kernel.org/netdev/20240306133734.4144808-1-john.ernberg@actia.se/ v2: https://lore.kernel.org/netdev/20240229105256.2903095-1-john.ernberg@actia.se/ v1: https://lore.kernel.org/netdev/20240212105010.2258421-1-john.ernberg@actia.se/ ==================== Link: https://lore.kernel.org/r/20240328155909.59613-1-john.ernberg@actia.se Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-03net: fec: Set mac_managed_pm during probeWei Fang
Setting mac_managed_pm during interface up is too late. In situations where the link is not brought up yet and the system suspends the regular PHY power management will run. Since the FEC ETHEREN control bit is cleared (automatically) on suspend the controller is off in resume. When the regular PHY power management resume path runs in this context it will write to the MII_DATA register but nothing will be transmitted on the MDIO bus. This can be observed by the following log: fec 5b040000.ethernet eth0: MDIO read timeout Microchip LAN87xx T1 5b040000.ethernet-1:04: PM: dpm_run_callback(): mdio_bus_phy_resume+0x0/0xc8 returns -110 Microchip LAN87xx T1 5b040000.ethernet-1:04: PM: failed to resume: error -110 The data written will however remain in the MII_DATA register. When the link later is set to administrative up it will trigger a call to fec_restart() which will restore the MII_SPEED register. This triggers the quirk explained in f166f890c8f0 ("net: ethernet: fec: Replace interrupt driven MDIO with polled IO") causing an extra MII_EVENT. This extra event desynchronizes all the MDIO register reads, causing them to complete too early. Leading all reads to read as 0 because fec_enet_mdio_wait() returns too early. When a Microchip LAN8700R PHY is connected to the FEC, the 0 reads causes the PHY to be initialized incorrectly and the PHY will not transmit any ethernet signal in this state. It cannot be brought out of this state without a power cycle of the PHY. Fixes: 557d5dc83f68 ("net: fec: use mac-managed PHY PM") Closes: https://lore.kernel.org/netdev/1f45bdbe-eab1-4e59-8f24-add177590d27@actia.se/ Signed-off-by: Wei Fang <wei.fang@nxp.com> [jernberg: commit message] Signed-off-by: John Ernberg <john.ernberg@actia.se> Link: https://lore.kernel.org/r/20240328155909.59613-2-john.ernberg@actia.se Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-03idpf: fix kernel panic on unknown packet typesJoshua Hay
In the very rare case where a packet type is unknown to the driver, idpf_rx_process_skb_fields would return early without calling eth_type_trans to set the skb protocol / the network layer handler. This is especially problematic if tcpdump is running when such a packet is received, i.e. it would cause a kernel panic. Instead, call eth_type_trans for every single packet, even when the packet type is unknown. Fixes: 3a8845af66ed ("idpf: add RX splitq napi poll support") Reported-by: Balazs Nemeth <bnemeth@redhat.com> Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Salvatore Daniele <sdaniele@redhat.com> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-03bcachefs: reconstruct_inode()Kent Overstreet
If an inode is missing, but corresponding extents and dirent still exist, it's well worth recreating it - this does so. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-03bcachefs: Subvolume reconstructionKent Overstreet
We can now recreate missing subvolumes from dirents and/or inodes. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-03bcachefs: Check for extents that point to same spaceKent Overstreet
In backpointer repair, if we get a missing backpointer - but there's already a backpointer that points to an existing extent - we've got multiple extents that point to the same space and need to decide which to keep. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-03bcachefs: Reconstruct missing snapshot nodesKent Overstreet
When the snapshots btree is going, we'll have to delete huge amounts of data - unless we can reconstruct it by looking at the keys that refer to it. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-03bcachefs: Flag btrees with missing dataKent Overstreet
We need this to know when we should attempt to reconstruct the snapshots btree Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-03bcachefs: Topology repair now uses nodes found by scanning to fill holesKent Overstreet
With the new btree node scan code, we can now recover from corrupt btree roots - simply create a new fake root at depth 1, and then insert all the leaves we found. If the root wasn't corrupt but there's corruption elsewhere in the btree, we can fill in holes as needed with the newest version of a given node(s) from the scan; we also check if a given btree node is older than what we found from the scan. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-03bcachefs: Repair pass for scanning for btree nodesKent Overstreet
If a btree root or interior btree node goes bad, we're going to lose a lot of data, unless we can recover the nodes that it pointed to by scanning. Fortunately btree node headers are fully self describing, and additionally the magic number is xored with the filesytem UUID, so we can do so safely. This implements the scanning - next patch will rework topology repair to make use of the found nodes. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-03bcachefs: Don't skip fake btree roots in fsckKent Overstreet
When a btree root is unreadable, we might still have keys fro the journal to walk and mark. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-03bcachefs: bch2_btree_root_alloc() -> bch2_btree_root_alloc_fake()Kent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-03bcachefs: Etyzinger cleanupsKent Overstreet
Pull out eytzinger.c and kill eytzinger_cmp_fn. We now provide eytzinger0_sort and eytzinger0_sort_r, which use the standard cmp_func_t and cmp_r_func_t callbacks. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-03bcachefs: bch2_shoot_down_journal_keys()Kent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-03bcachefs: Clear recovery_passes_required as they complete without errorsKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-03Merge tag 'vboxsf-v6.9-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hansg/linux Pull vboxsf fixes from Hans de Goede: - Compiler warning fixes - Explicitly deny setlease attempts * tag 'vboxsf-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/hansg/linux: vboxsf: explicitly deny setlease attempts vboxsf: Remove usage of the deprecated ida_simple_xx() API vboxsf: Avoid an spurious warning if load_nls_xxx() fails vboxsf: remove redundant variable out_len
2024-04-03Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "ARM: - Ensure perf events programmed to count during guest execution are actually enabled before entering the guest in the nVHE configuration - Restore out-of-range handler for stage-2 translation faults - Several fixes to stage-2 TLB invalidations to avoid stale translations, possibly including partial walk caches - Fix early handling of architectural VHE-only systems to ensure E2H is appropriately set - Correct a format specifier warning in the arch_timer selftest - Make the KVM banner message correctly handle all of the possible configurations RISC-V: - Remove redundant semicolon in num_isa_ext_regs() - Fix APLIC setipnum_le/be write emulation - Fix APLIC in_clrip[x] read emulation x86: - Fix a bug in KVM_SET_CPUID{2,} where KVM looks at the wrong CPUID entries (old vs. new) and ultimately neglects to clear PV_UNHALT from vCPUs with HLT-exiting disabled - Documentation fixes for SEV - Fix compat ABI for KVM_MEMORY_ENCRYPT_OP - Fix a 14-year-old goof in a declaration shared by host and guest; the enabled field used by Linux when running as a guest pushes the size of "struct kvm_vcpu_pv_apf_data" from 64 to 68 bytes. This is really unconsequential because KVM never consumes anything beyond the first 64 bytes, but the resulting struct does not match the documentation Selftests: - Fix spelling mistake in arch_timer selftest" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits) KVM: arm64: Rationalise KVM banner output arm64: Fix early handling of FEAT_E2H0 not being implemented KVM: arm64: Ensure target address is granule-aligned for range TLBI KVM: arm64: Use TLBI_TTL_UNKNOWN in __kvm_tlb_flush_vmid_range() KVM: arm64: Don't pass a TLBI level hint when zapping table entries KVM: arm64: Don't defer TLB invalidation when zapping table entries KVM: selftests: Fix __GUEST_ASSERT() format warnings in ARM's arch timer test KVM: arm64: Fix out-of-IPA space translation fault handling KVM: arm64: Fix host-programmed guest events in nVHE RISC-V: KVM: Fix APLIC in_clrip[x] read emulation RISC-V: KVM: Fix APLIC setipnum_le/be write emulation RISC-V: KVM: Remove second semicolon KVM: selftests: Fix spelling mistake "trigged" -> "triggered" Documentation: kvm/sev: clarify usage of KVM_MEMORY_ENCRYPT_OP Documentation: kvm/sev: separate description of firmware KVM: SEV: fix compat ABI for KVM_MEMORY_ENCRYPT_OP KVM: selftests: Check that PV_UNHALT is cleared when HLT exiting is disabled KVM: x86: Use actual kvm_cpuid.base for clearing KVM_FEATURE_PV_UNHALT KVM: x86: Introduce __kvm_get_hypervisor_cpuid() helper KVM: SVM: Return -EINVAL instead of -EBUSY on attempt to re-init SEV/SEV-ES ...
2024-04-03security: Place security_path_post_mknod() where the original IMA call wasRoberto Sassu
Commit 08abce60d63f ("security: Introduce path_post_mknod hook") introduced security_path_post_mknod(), to replace the IMA-specific call to ima_post_path_mknod(). For symmetry with security_path_mknod(), security_path_post_mknod() was called after a successful mknod operation, for any file type, rather than only for regular files at the time there was the IMA call. However, as reported by VFS maintainers, successful mknod operation does not mean that the dentry always has an inode attached to it (for example, not for FIFOs on a SAMBA mount). If that condition happens, the kernel crashes when security_path_post_mknod() attempts to verify if the inode associated to the dentry is private. Move security_path_post_mknod() where the ima_post_path_mknod() call was, which is obviously correct from IMA/EVM perspective. IMA/EVM are the only in-kernel users, and only need to inspect regular files. Reported-by: Steve French <smfrench@gmail.com> Closes: https://lore.kernel.org/linux-kernel/CAH2r5msAVzxCUHHG8VKrMPUKQHmBpE6K9_vjhgDa1uAvwx4ppw@mail.gmail.com/ Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Fixes: 08abce60d63f ("security: Introduce path_post_mknod hook") Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-04-03x86/retpoline: Do the necessary fixup to the Zen3/4 srso return thunk for !SRSOBorislav Petkov (AMD)
The srso_alias_untrain_ret() dummy thunk in the !CONFIG_MITIGATION_SRSO case is there only for the altenative in CALL_UNTRAIN_RET to have a symbol to resolve. However, testing with kernels which don't have CONFIG_MITIGATION_SRSO enabled, leads to the warning in patch_return() to fire: missing return thunk: srso_alias_untrain_ret+0x0/0x10-0x0: eb 0e 66 66 2e WARNING: CPU: 0 PID: 0 at arch/x86/kernel/alternative.c:826 apply_returns (arch/x86/kernel/alternative.c:826 Put in a plain "ret" there so that gcc doesn't put a return thunk in in its place which special and gets checked. In addition: ERROR: modpost: "srso_alias_untrain_ret" [arch/x86/kvm/kvm-amd.ko] undefined! make[2]: *** [scripts/Makefile.modpost:145: Module.symvers] Chyba 1 make[1]: *** [/usr/src/linux-6.8.3/Makefile:1873: modpost] Chyba 2 make: *** [Makefile:240: __sub-make] Chyba 2 since !SRSO builds would use the dummy return thunk as reported by petr.pisar@atlas.cz, https://bugzilla.kernel.org/show_bug.cgi?id=218679. Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202404020901.da75a60f-oliver.sang@intel.com Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/all/202404020901.da75a60f-oliver.sang@intel.com/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-04-03ice: fix enabling RX VLAN filteringPetr Oros
ice_port_vlan_on/off() was introduced in commit 2946204b3fa8 ("ice: implement bridge port vlan"). But ice_port_vlan_on() incorrectly assigns ena_rx_filtering to inner_vlan_ops in DVM mode. This causes an error when rx_filtering cannot be enabled in legacy mode. Reproducer: echo 1 > /sys/class/net/$PF/device/sriov_numvfs ip link set $PF vf 0 spoofchk off trust on vlan 3 dmesg: ice 0000:41:00.0: failed to enable Rx VLAN filtering for VF 0 VSI 9 during VF rebuild, error -95 Fixes: 2946204b3fa8 ("ice: implement bridge port vlan") Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-03ice: Fix freeing uninitialized pointersDan Carpenter
Automatically cleaned up pointers need to be initialized before exiting their scope. In this case, they need to be initialized to NULL before any return statement. Fixes: 90f821d72e11 ("ice: avoid unnecessary devm_ usage") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-03vboxsf: explicitly deny setlease attemptsJeff Layton
vboxsf does not break leases on its own, so it can't properly handle the case where the hypervisor changes the data. Don't allow file leases on vboxsf. Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20240319-setlease-v1-1-5997d67e04b3@kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-04-03vboxsf: Remove usage of the deprecated ida_simple_xx() APIChristophe JAILLET
ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). This is less verbose. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/b3c057c86b73f0309a6362031d21f4d7ebb60587.1698835730.git.christophe.jaillet@wanadoo.fr Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-04-03vboxsf: Avoid an spurious warning if load_nls_xxx() failsChristophe JAILLET
If an load_nls_xxx() function fails a few lines above, the 'sbi->bdi_id' is still 0. So, in the error handling path, we will call ida_simple_remove(..., 0) which is not allocated yet. In order to prevent a spurious "ida_free called for id=0 which is not allocated." message, tweak the error handling path and add a new label. Fixes: 0fd169576648 ("fs: Add VirtualBox guest shared folder (vboxsf) support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/d09eaaa4e2e08206c58a1a27ca9b3e81dc168773.1698835730.git.christophe.jaillet@wanadoo.fr Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-04-03vboxsf: remove redundant variable out_lenColin Ian King
The variable out_len is being used to accumulate the number of bytes but it is not being used for any other purpose. The variable is redundant and can be removed. Cleans up clang scan build warning: fs/vboxsf/utils.c:443:9: warning: variable 'out_len' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20240229225138.351909-1-colin.i.king@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-04-03net: bcmgenet: Reset RBUF on first openPhil Elwell
If the RBUF logic is not reset when the kernel starts then there may be some data left over from any network boot loader. If the 64-byte packet headers are enabled then this can be fatal. Extend bcmgenet_dma_disable to do perform the reset, but not when called from bcmgenet_resume in order to preserve a wake packet. N.B. This different handling of resume is just based on a hunch - why else wouldn't one reset the RBUF as well as the TBUF? If this isn't the case then it's easy to change the patch to make the RBUF reset unconditional. See: https://github.com/raspberrypi/linux/issues/3850 See: https://github.com/raspberrypi/firmware/issues/1882 Signed-off-by: Phil Elwell <phil@raspberrypi.com> Signed-off-by: Maarten Vanraes <maarten@rmail.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-03octeontx2-af: Add array index checkAleksandr Mishin
In rvu_map_cgx_lmac_pf() the 'iter', which is used as an array index, can reach value (up to 14) that exceed the size (MAX_LMAC_COUNT = 8) of the array. Fix this bug by adding 'iter' value check. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 91c6945ea1f9 ("octeontx2-af: cn10k: Add RPM MAC support") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-02Merge tag 'selinux-pr-20240402' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux fix from Paul Moore: "A single patch for SELinux to fix a problem where we could potentially dereference an error pointer if we failed to successfully mount selinuxfs" * tag 'selinux-pr-20240402' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: avoid dereference of garbage after mount failure
2024-04-02MAINTAINERS: mlx5: Add Tariq ToukanTariq Toukan
Add myself as mlx5 core and EN maintainer. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Acked-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20240401184347.53884-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-02ipv6: Fix infinite recursion in fib6_dump_done().Kuniyuki Iwashima
syzkaller reported infinite recursive calls of fib6_dump_done() during netlink socket destruction. [1] From the log, syzkaller sent an AF_UNSPEC RTM_GETROUTE message, and then the response was generated. The following recvmmsg() resumed the dump for IPv6, but the first call of inet6_dump_fib() failed at kzalloc() due to the fault injection. [0] 12:01:34 executing program 3: r0 = socket$nl_route(0x10, 0x3, 0x0) sendmsg$nl_route(r0, ... snip ...) recvmmsg(r0, ... snip ...) (fail_nth: 8) Here, fib6_dump_done() was set to nlk_sk(sk)->cb.done, and the next call of inet6_dump_fib() set it to nlk_sk(sk)->cb.args[3]. syzkaller stopped receiving the response halfway through, and finally netlink_sock_destruct() called nlk_sk(sk)->cb.done(). fib6_dump_done() calls fib6_dump_end() and nlk_sk(sk)->cb.done() if it is still not NULL. fib6_dump_end() rewrites nlk_sk(sk)->cb.done() by nlk_sk(sk)->cb.args[3], but it has the same function, not NULL, calling itself recursively and hitting the stack guard page. To avoid the issue, let's set the destructor after kzalloc(). [0]: FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 0 CPU: 1 PID: 432110 Comm: syz-executor.3 Not tainted 6.8.0-12821-g537c2e91d354-dirty #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117) should_fail_ex (lib/fault-inject.c:52 lib/fault-inject.c:153) should_failslab (mm/slub.c:3733) kmalloc_trace (mm/slub.c:3748 mm/slub.c:3827 mm/slub.c:3992) inet6_dump_fib (./include/linux/slab.h:628 ./include/linux/slab.h:749 net/ipv6/ip6_fib.c:662) rtnl_dump_all (net/core/rtnetlink.c:4029) netlink_dump (net/netlink/af_netlink.c:2269) netlink_recvmsg (net/netlink/af_netlink.c:1988) ____sys_recvmsg (net/socket.c:1046 net/socket.c:2801) ___sys_recvmsg (net/socket.c:2846) do_recvmmsg (net/socket.c:2943) __x64_sys_recvmmsg (net/socket.c:3041 net/socket.c:3034 net/socket.c:3034) [1]: BUG: TASK stack guard page was hit at 00000000f2fa9af1 (stack is 00000000b7912430..000000009a436beb) stack guard page: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 223719 Comm: kworker/1:3 Not tainted 6.8.0-12821-g537c2e91d354-dirty #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: events netlink_sock_destruct_work RIP: 0010:fib6_dump_done (net/ipv6/ip6_fib.c:570) Code: 3c 24 e8 f3 e9 51 fd e9 28 fd ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 41 57 41 56 41 55 41 54 55 48 89 fd <53> 48 8d 5d 60 e8 b6 4d 07 fd 48 89 da 48 b8 00 00 00 00 00 fc ff RSP: 0018:ffffc9000d980000 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffffffff84405990 RCX: ffffffff844059d3 RDX: ffff8881028e0000 RSI: ffffffff84405ac2 RDI: ffff88810c02f358 RBP: ffff88810c02f358 R08: 0000000000000007 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000224 R12: 0000000000000000 R13: ffff888007c82c78 R14: ffff888007c82c68 R15: ffff888007c82c68 FS: 0000000000000000(0000) GS:ffff88811b100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000d97fff8 CR3: 0000000102309002 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <#DF> </#DF> <TASK> fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) ... fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) netlink_sock_destruct (net/netlink/af_netlink.c:401) __sk_destruct (net/core/sock.c:2177 (discriminator 2)) sk_destruct (net/core/sock.c:2224) __sk_free (net/core/sock.c:2235) sk_free (net/core/sock.c:2246) process_one_work (kernel/workqueue.c:3259) worker_thread (kernel/workqueue.c:3329 kernel/workqueue.c:3416) kthread (kernel/kthread.c:388) ret_from_fork (arch/x86/kernel/process.c:153) ret_from_fork_asm (arch/x86/entry/entry_64.S:256) Modules linked in: Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240401211003.25274-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-02r8169: fix issue caused by buggy BIOS on certain boards with RTL8168dHeiner Kallweit
On some boards with this chip version the BIOS is buggy and misses to reset the PHY page selector. This results in the PHY ID read accessing registers on a different page, returning a more or less random value. Fix this by resetting the page selector first. Fixes: f1e911d5d0df ("r8169: add basic phylib support") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/64f2055e-98b8-45ec-8568-665e3d54d4e6@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-02vsock/virtio: fix packet delivery to tap deviceMarco Pinna
Commit 82dfb540aeb2 ("VSOCK: Add virtio vsock vsockmon hooks") added virtio_transport_deliver_tap_pkt() for handing packets to the vsockmon device. However, in virtio_transport_send_pkt_work(), the function is called before actually sending the packet (i.e. before placing it in the virtqueue with virtqueue_add_sgs() and checking whether it returned successfully). Queuing the packet in the virtqueue can fail even multiple times. However, in virtio_transport_deliver_tap_pkt() we deliver the packet to the monitoring tap interface only the first time we call it. This certainly avoids seeing the same packet replicated multiple times in the monitoring interface, but it can show the packet sent with the wrong timestamp or even before we succeed to queue it in the virtqueue. Move virtio_transport_deliver_tap_pkt() after calling virtqueue_add_sgs() and making sure it returned successfully. Fixes: 82dfb540aeb2 ("VSOCK: Add virtio vsock vsockmon hooks") Cc: stable@vge.kernel.org Signed-off-by: Marco Pinna <marco.pinn95@gmail.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20240329161259.411751-1-marco.pinn95@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-02ax25: fix use-after-free bugs caused by ax25_ds_del_timerDuoming Zhou
When the ax25 device is detaching, the ax25_dev_device_down() calls ax25_ds_del_timer() to cleanup the slave_timer. When the timer handler is running, the ax25_ds_del_timer() that calls del_timer() in it will return directly. As a result, the use-after-free bugs could happen, one of the scenarios is shown below: (Thread 1) | (Thread 2) | ax25_ds_timeout() ax25_dev_device_down() | ax25_ds_del_timer() | del_timer() | ax25_dev_put() //FREE | | ax25_dev-> //USE In order to mitigate bugs, when the device is detaching, use timer_shutdown_sync() to stop the timer. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240329015023.9223-1-duoming@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-02bcachefs: ratelimit informational fsck errorsKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-02bcachefs: Check for bad needs_discard before doing discardKent Overstreet
In the discard worker, we were failing to validate the bucket state - meaning a corrupt needs_discard btree could cause us to discard a bucket that we shouldn't. If check_alloc_info hasn't run yet we just want to bail out, otherwise it's a filesystem inconsistent error. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-02bcachefs: Improve bch2_btree_update_to_text()Kent Overstreet
Print out the mode as a string, and also print out the btree and watermark. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-02Merge tag 'docs-6.9-fixes' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation fixes from Jonathan Corbet: "Four small documentation fixes" * tag 'docs-6.9-fixes' of git://git.lwn.net/linux: docs: zswap: fix shell command format tracing: Fix documentation on tp_printk cmdline option docs: Fix bitfield handling in kernel-doc Documentation: dev-tools: Add link to RV docs
2024-04-02Merge tag 'bcachefs-2024-04-01' of https://evilpiepirate.org/git/bcachefsLinus Torvalds
Pull bcachefs fixes from Kent Overstreet: "Lots of fixes for situations with extreme filesystem damage. One fix ("Fix journal pins in btree write buffer") applicable to normal usage; also a dio performance fix. New repair/construction code is in the final stages, should be ready in about a week. Anyone that lost btree interior nodes (or a variety of other damage) as a result of the splitbrain bug will be able to repair then" * tag 'bcachefs-2024-04-01' of https://evilpiepirate.org/git/bcachefs: (32 commits) bcachefs: On emergency shutdown, print out current journal sequence number bcachefs: Fix overlapping extent repair bcachefs: Fix remove_dirent() bcachefs: Logged op errors should be ignored bcachefs: Improve -o norecovery; opts.recovery_pass_limit bcachefs: bch2_run_explicit_recovery_pass_persistent() bcachefs: Ensure bch_sb_field_ext always exists bcachefs: Flush journal immediately after replay if we did early repair bcachefs: Resume logged ops after fsck bcachefs: Add error messages to logged ops fns bcachefs: Split out recovery_passes.c bcachefs: fix backpointer for missing alloc key msg bcachefs: Fix bch2_btree_increase_depth() bcachefs: Kill bch2_bkey_ptr_data_type() bcachefs: Fix use after free in check_root_trans() bcachefs: Fix repair path for missing indirect extents bcachefs: Fix use after free in bch2_check_fix_ptrs() bcachefs: Fix btree node keys accounting in topology repair path bcachefs: Check btree ptr min_key in .invalid bcachefs: add REQ_SYNC and REQ_IDLE in write dio ...
2024-04-02mean_and_variance: Drop always failing testsGuenter Roeck
mean_and_variance_test_2 and mean_and_variance_test_4 always fail. The input parameters to those tests are identical to the input parameters to tests 1 and 3, yet the expected result for tests 2 and 4 is different for the mean and stddev tests. That will always fail. Expected mean_and_variance_get_mean(mv) == mean[i], but mean_and_variance_get_mean(mv) == 22 (0x16) mean[i] == 10 (0xa) Drop the bad tests. Fixes: 65bc41090720 ("mean and variance: More tests") Closes: https://lore.kernel.org/lkml/065b94eb-6a24-4248-b7d7-d3212efb4787@roeck-us.net/ Cc: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-02Merge tag 'kvm-riscv-fixes-6.9-1' of https://github.com/kvm-riscv/linux into ↵Paolo Bonzini
HEAD KVM/riscv fixes for 6.9, take #1 - Fix spelling mistake in arch_timer selftest - Remove redundant semicolon in num_isa_ext_regs() - Fix APLIC setipnum_le/be write emulation - Fix APLIC in_clrip[x] read emulation
2024-04-02Merge tag 'kvmarm-fixes-6.9-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.9, part #1 - Ensure perf events programmed to count during guest execution are actually enabled before entering the guest in the nVHE configuration. - Restore out-of-range handler for stage-2 translation faults. - Several fixes to stage-2 TLB invalidations to avoid stale translations, possibly including partial walk caches. - Fix early handling of architectural VHE-only systems to ensure E2H is appropriately set. - Correct a format specifier warning in the arch_timer selftest. - Make the KVM banner message correctly handle all of the possible configurations.
2024-04-02bpf, sockmap: Prevent lock inversion deadlock in map delete elemJakub Sitnicki
syzkaller started using corpuses where a BPF tracing program deletes elements from a sockmap/sockhash map. Because BPF tracing programs can be invoked from any interrupt context, locks taken during a map_delete_elem operation must be hardirq-safe. Otherwise a deadlock due to lock inversion is possible, as reported by lockdep: CPU0 CPU1 ---- ---- lock(&htab->buckets[i].lock); local_irq_disable(); lock(&host->lock); lock(&htab->buckets[i].lock); <Interrupt> lock(&host->lock); Locks in sockmap are hardirq-unsafe by design. We expects elements to be deleted from sockmap/sockhash only in task (normal) context with interrupts enabled, or in softirq context. Detect when map_delete_elem operation is invoked from a context which is _not_ hardirq-unsafe, that is interrupts are disabled, and bail out with an error. Note that map updates are not affected by this issue. BPF verifier does not allow updating sockmap/sockhash from a BPF tracing program today. Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface") Reported-by: xingwei lee <xrivendell7@gmail.com> Reported-by: yue sun <samsun1006219@gmail.com> Reported-by: syzbot+bc922f476bd65abbd466@syzkaller.appspotmail.com Reported-by: syzbot+d4066896495db380182e@syzkaller.appspotmail.com Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: syzbot+d4066896495db380182e@syzkaller.appspotmail.com Acked-by: John Fastabend <john.fastabend@gmail.com> Closes: https://syzkaller.appspot.com/bug?extid=d4066896495db380182e Closes: https://syzkaller.appspot.com/bug?extid=bc922f476bd65abbd466 Link: https://lore.kernel.org/bpf/20240402104621.1050319-1-jakub@cloudflare.com
2024-04-02bcachefs: fix nocow lock deadlockKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-01i40e: Fix VF MAC filter removalIvan Vecera
Commit 73d9629e1c8c ("i40e: Do not allow untrusted VF to remove administratively set MAC") fixed an issue where untrusted VF was allowed to remove its own MAC address although this was assigned administratively from PF. Unfortunately the introduced check is wrong because it causes that MAC filters for other MAC addresses including multi-cast ones are not removed. <snip> if (ether_addr_equal(addr, vf->default_lan_addr.addr) && i40e_can_vf_change_mac(vf)) was_unimac_deleted = true; else continue; if (i40e_del_mac_filter(vsi, al->list[i].addr)) { ... </snip> The else path with `continue` effectively skips any MAC filter removal except one for primary MAC addr when VF is allowed to do so. Fix the check condition so the `continue` is only done for primary MAC address. Fixes: 73d9629e1c8c ("i40e: Do not allow untrusted VF to remove administratively set MAC") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240329180638.211412-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-01Merge branch 'mptcp-fix-fallback-mib-counter-and-wrong-var-in-selftests'Jakub Kicinski
Matthieu Baerts says: ==================== mptcp: fix fallback MIB counter and wrong var in selftests Here are two fixes related to MPTCP. The first patch fixes when the MPTcpExtMPCapableFallbackACK MIB counter is modified: it should only be incremented when a connection was using MPTCP options, but then a fallback to TCP has been done. This patch also checks the counter is not incremented by mistake during the connect selftests. This counter was wrongly incremented since its introduction in v5.7. The second patch fixes a wrong parsing of the 'dev' endpoint options in the selftests: the wrong variable was used. This option was not used before, but it is going to be soon. This issue is visible since v5.18. ==================== Link: https://lore.kernel.org/r/20240329-upstream-net-20240329-fallback-mib-v1-0-324a8981da48@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-01selftests: mptcp: join: fix dev in check_endpointGeliang Tang
There's a bug in pm_nl_check_endpoint(), 'dev' didn't be parsed correctly. If calling it in the 2nd test of endpoint_tests() too, it fails with an error like this: creation [FAIL] expected '10.0.2.2 id 2 subflow dev dev' \ found '10.0.2.2 id 2 subflow dev ns2eth2' The reason is '$2' should be set to 'dev', not '$1'. This patch fixes it. Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case") Cc: stable@vger.kernel.org Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240329-upstream-net-20240329-fallback-mib-v1-2-324a8981da48@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-01mptcp: don't account accept() of non-MPC client as fallback to TCPDavide Caratti
Current MPTCP servers increment MPTcpExtMPCapableFallbackACK when they accept non-MPC connections. As reported by Christoph, this is "surprising" because the counter might become greater than MPTcpExtMPCapableSYNRX. MPTcpExtMPCapableFallbackACK counter's name suggests it should only be incremented when a connection was seen using MPTCP options, then a fallback to TCP has been done. Let's do that by incrementing it when the subflow context of an inbound MPC connection attempt is dropped. Also, update mptcp_connect.sh kselftest, to ensure that the above MIB does not increment in case a pure TCP client connects to a MPTCP server. Fixes: fc518953bc9c ("mptcp: add and use MIB counter infrastructure") Cc: stable@vger.kernel.org Reported-by: Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/449 Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240329-upstream-net-20240329-fallback-mib-v1-1-324a8981da48@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-16 08:27:54 +0000