summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-03-04net: dsa: mt7530: Enable Rx sptag for EN7581 SoCLorenzo Bianconi
Packet Processor Engine (PPE) module used for hw acceleration on EN7581 mac block, in order to properly parse packets, requires DSA untagged packets on TX side and read DSA tag from DMA descriptor on RX side. For this reason, enable RX Special Tag (SPTAG) for EN7581 SoC. This is a preliminary patch to enable netfilter flowtable hw offloading on EN7581 SoC. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04net: airoha: Move DSA tag in DMA descriptorLorenzo Bianconi
Packet Processor Engine (PPE) module reads DSA tags from the DMA descriptor and requires untagged DSA packets to properly parse them. Move DSA tag in the DMA descriptor on TX side and read DSA tag from DMA descriptor on RX side. In order to avoid skb reallocation, store tag in skb_dst on RX side. This is a preliminary patch to enable netfilter flowtable hw offloading on EN7581 SoC. Tested-by: Sayantan Nandy <sayantan.nandy@airoha.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04net: airoha: Move register definitions in airoha_regs.hLorenzo Bianconi
Move common airoha_eth register definitions in airoha_regs.h in order to reuse them for Packet Processor Engine (PPE) codebase. PPE module is used to enable support for flowtable hw offloading in airoha_eth driver. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04net: airoha: Move reg/write utility routines in airoha_eth.hLorenzo Bianconi
This is a preliminary patch to introduce flowtable hw offloading support for airoha_eth driver. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04net: airoha: Move definitions in airoha_eth.hLorenzo Bianconi
Move common airoha_eth definitions in airoha_eth.h in order to reuse them for Packet Processor Engine (PPE) codebase. PPE module is used to enable support for flowtable hw offloading in airoha_eth driver. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04net: airoha: Move airoha_eth driver in a dedicated folderLorenzo Bianconi
The airoha_eth driver has no codebase shared with mtk_eth_soc one. Moreover, the upcoming features (flowtable hw offloading, PCS, ..) will not reuse any code from MediaTek driver. Move the Airoha driver in a dedicated folder. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04Merge branch 'net-notify-users-when-an-iface-cannot-change-its-netns'Paolo Abeni
Nicolas Dichtel says: ==================== net: notify users when an iface cannot change its netns This series adds a way to see if an interface cannot be moved to another netns. Documentation/netlink/specs/rt_link.yaml | 3 ++ .../networking/net_cachelines/net_device.rst | 2 +- Documentation/networking/switchdev.rst | 2 +- drivers/net/amt.c | 2 +- drivers/net/bonding/bond_main.c | 2 +- drivers/net/ethernet/adi/adin1110.c | 2 +- .../net/ethernet/marvell/prestera/prestera_main.c | 2 +- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 4 +- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 2 +- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 2 +- drivers/net/ethernet/rocker/rocker_main.c | 2 +- drivers/net/ethernet/ti/cpsw_new.c | 2 +- drivers/net/loopback.c | 2 +- drivers/net/net_failover.c | 2 +- drivers/net/team/team_core.c | 2 +- drivers/net/vrf.c | 2 +- include/linux/netdevice.h | 9 +++-- include/uapi/linux/if_link.h | 1 + net/batman-adv/soft-interface.c | 2 +- net/bridge/br_device.c | 2 +- net/core/dev.c | 45 +++++++++++++++++----- net/core/rtnetlink.c | 5 ++- net/hsr/hsr_device.c | 2 +- net/ieee802154/6lowpan/core.c | 2 +- net/ieee802154/core.c | 10 ++--- net/ipv4/ip_tunnel.c | 2 +- net/ipv4/ipmr.c | 2 +- net/ipv6/ip6_gre.c | 2 +- net/ipv6/ip6_tunnel.c | 2 +- net/ipv6/ip6mr.c | 2 +- net/ipv6/sit.c | 2 +- net/openvswitch/vport-internal_dev.c | 2 +- net/wireless/core.c | 10 ++--- tools/testing/selftests/net/forwarding/README | 2 +- 34 files changed, 86 insertions(+), 53 deletions(-) Comments are welcome. Regards, Nicolas ==================== Link: https://patch.msgid.link/20250228102144.154802-1-nicolas.dichtel@6wind.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04net: plumb extack in __dev_change_net_namespace()Nicolas Dichtel
It could be hard to understand why the netlink command fails. For example, if dev->netns_immutable is set, the error is "Invalid argument". Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04net: advertise netns_immutable property via netlinkNicolas Dichtel
Since commit 05c1280a2bcf ("netdev_features: convert NETIF_F_NETNS_LOCAL to dev->netns_local"), there is no way to see if the netns_immutable property s set on a device. Let's add a netlink attribute to advertise it. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04net: rename netns_local to netns_immutableNicolas Dichtel
The name 'netns_local' is confusing. A following commit will export it via netlink, so let's use a more explicit name. Reported-by: Eric Dumazet <edumazet@google.com> Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04Merge branch 'some-pktgen-fixes-improvments-part-ii'Paolo Abeni
Peter Seiderer says: ==================== Some pktgen fixes/improvments (part II) While taking a look at '[PATCH net] pktgen: Avoid out-of-range in get_imix_entries' ([1]) and '[PATCH net v2] pktgen: Avoid out-of-bounds access in get_imix_entries' ([2], [3]) and doing some tests and code review I detected that the /proc/net/pktgen/... parsing logic does not honour the user given buffer bounds (resulting in out-of-bounds access). This can be observed e.g. by the following simple test (sometimes the old/'longer' previous value is re-read from the buffer): $ echo add_device lo@0 > /proc/net/pktgen/kpktgend_0 $ echo "min_pkt_size 12345" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 12345 max_pkt_size: 0 Result: OK: min_pkt_size=12345 $ echo -n "min_pkt_size 123" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 12345 max_pkt_size: 0 Result: OK: min_pkt_size=12345 $ echo "min_pkt_size 123" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 123 max_pkt_size: 0 Result: OK: min_pkt_size=123 So fix the out-of-bounds access (and some minor findings) and add a simple proc_net_pktgen selftest... Patch set splited into part I (now already applied to net-next) - net: pktgen: replace ENOTSUPP with EOPNOTSUPP - net: pktgen: enable 'param=value' parsing - net: pktgen: fix hex32_arg parsing for short reads - net: pktgen: fix 'rate 0' error handling (return -EINVAL) - net: pktgen: fix 'ratep 0' error handling (return -EINVAL) - net: pktgen: fix ctrl interface command parsing - net: pktgen: fix access outside of user given buffer in pktgen_thread_write() nd part II (this one): - net: pktgen: use defines for the various dec/hex number parsing digits lengths - net: pktgen: fix mix of int/long - net: pktgen: remove extra tmp variable (re-use len instead) - net: pktgen: remove some superfluous variable initializing - net: pktgen: fix mpls maximum labels list parsing - net: pktgen: fix access outside of user given buffer in pktgen_if_write() - net: pktgen: fix mpls reset parsing - net: pktgen: remove all superfluous index assignements - selftest: net: add proc_net_pktgen [1] https://lore.kernel.org/netdev/20241006221221.3744995-1-artem.chernyshev@red-soft.ru/ [2] https://lore.kernel.org/netdev/20250109083039.14004-1-pchelkin@ispras.ru/ [3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=76201b5979768500bca362871db66d77cb4c225e ==================== Link: https://patch.msgid.link/20250227135604.40024-1-ps.report@gmx.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04selftest: net: add proc_net_pktgenPeter Seiderer
Add some test for /proc/net/pktgen/... interface. - enable 'CONFIG_NET_PKTGEN=m' in tools/testing/selftests/net/config Signed-off-by: Peter Seiderer <ps.report@gmx.net> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04net: pktgen: remove all superfluous index assignementsPeter Seiderer
Remove all superfluous index ('i += len') assignements (value not used afterwards). Signed-off-by: Peter Seiderer <ps.report@gmx.net> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04net: pktgen: fix mpls reset parsingPeter Seiderer
Fix mpls list reset parsing to work as describe in Documentation/networking/pktgen.rst: pgset "mpls 0" turn off mpls (or any invalid argument works too!) - before the patch $ echo "mpls 00000001,00000002" > /proc/net/pktgen/lo\@0 $ grep mpls /proc/net/pktgen/lo\@0 mpls: 00000001, 00000002 Result: OK: mpls=00000001,00000002 $ echo "mpls 00000001,00000002" > /proc/net/pktgen/lo\@0 $ echo "mpls 0" > /proc/net/pktgen/lo\@0 $ grep mpls /proc/net/pktgen/lo\@0 mpls: 00000000 Result: OK: mpls=00000000 $ echo "mpls 00000001,00000002" > /proc/net/pktgen/lo\@0 $ echo "mpls invalid" > /proc/net/pktgen/lo\@0 $ grep mpls /proc/net/pktgen/lo\@0 Result: OK: mpls= - after the patch $ echo "mpls 00000001,00000002" > /proc/net/pktgen/lo\@0 $ grep mpls /proc/net/pktgen/lo\@0 mpls: 00000001, 00000002 Result: OK: mpls=00000001,00000002 $ echo "mpls 00000001,00000002" > /proc/net/pktgen/lo\@0 $ echo "mpls 0" > /proc/net/pktgen/lo\@0 $ grep mpls /proc/net/pktgen/lo\@0 Result: OK: mpls= $ echo "mpls 00000001,00000002" > /proc/net/pktgen/lo\@0 $ echo "mpls invalid" > /proc/net/pktgen/lo\@0 $ grep mpls /proc/net/pktgen/lo\@0 Result: OK: mpls= Signed-off-by: Peter Seiderer <ps.report@gmx.net> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04net: pktgen: fix access outside of user given buffer in pktgen_if_write()Peter Seiderer
Honour the user given buffer size for the hex32_arg(), num_arg(), strn_len(), get_imix_entries() and get_labels() calls (otherwise they will access memory outside of the user given buffer). Signed-off-by: Peter Seiderer <ps.report@gmx.net> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04net: pktgen: fix mpls maximum labels list parsingPeter Seiderer
Fix mpls maximum labels list parsing up to MAX_MPLS_LABELS entries (instead of up to MAX_MPLS_LABELS - 1). Addresses the following: $ echo "mpls 00000f00,00000f01,00000f02,00000f03,00000f04,00000f05,00000f06,00000f07,00000f08,00000f09,00000f0a,00000f0b,00000f0c,00000f0d,00000f0e,00000f0f" > /proc/net/pktgen/lo\@0 -bash: echo: write error: Argument list too long Signed-off-by: Peter Seiderer <ps.report@gmx.net> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04net: pktgen: remove some superfluous variable initializingPeter Seiderer
Remove some superfluous variable initializing before hex32_arg call (as the same init is done here already). Signed-off-by: Peter Seiderer <ps.report@gmx.net> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04net: pktgen: remove extra tmp variable (re-use len instead)Peter Seiderer
Remove extra tmp variable in pktgen_if_write (re-use len instead). Signed-off-by: Peter Seiderer <ps.report@gmx.net> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04net: pktgen: fix mix of int/longPeter Seiderer
Fix mix of int/long (and multiple conversion from/to) by using consequently size_t for i and max and ssize_t for len and adjust function signatures of hex32_arg(), count_trail_chars(), num_arg() and strn_len() accordingly. Signed-off-by: Peter Seiderer <ps.report@gmx.net> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-03net: sfp: add quirk for FS SFP-10GM-T copper SFP+ moduleMartin Schiller
Add quirk for a copper SFP that identifies itself as "FS" "SFP-10GM-T". It uses RollBall protocol to talk to the PHY and needs 4 sec wait before probing the PHY. Signed-off-by: Martin Schiller <ms@dev.tdt.de> Link: https://patch.msgid.link/20250227071058.1520027-1-ms@dev.tdt.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03mptcp: Remove unused declaration mptcp_set_owner_r()Yue Haibing
Commit 6639498ed85f ("mptcp: cleanup mem accounting") removed the implementation but leave declaration. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250228095148.4003065-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03Merge branch 'add-sock_kmemdup-helper'Jakub Kicinski
Geliang Tang says: ==================== add sock_kmemdup helper While developing MPTCP BPF path manager [1], I found it's useful to add a new sock_kmemdup() helper. My use case is this: In mptcp_userspace_pm_append_new_local_addr() function (see patch 3 in this patchset), it uses sock_kmalloc() to allocate an address entry "e", then immediately duplicate the input "entry" to it: ''' e = sock_kmalloc(sk, sizeof(*e), GFP_ATOMIC); if (!e) { ret = -ENOMEM; goto append_err; } *e = *entry; ''' When I implemented MPTCP BPF path manager, I needed to implement a code similar to this in BPF. The kfunc sock_kmalloc() can be easily invoked in BPF to allocate an entry "e", but the code "*e = *entry;" that assigns "entry" to "e" is not easy to implemented. I had to implement such a "copy entry" helper in BPF: ''' static void mptcp_pm_copy_addr(struct mptcp_addr_info *dst, struct mptcp_addr_info *src) { dst->id = src->id; dst->family = src->family; dst->port = src->port; if (src->family == AF_INET) { dst->addr.s_addr = src->addr.s_addr; } else if (src->family == AF_INET6) { dst->addr6.s6_addr32[0] = src->addr6.s6_addr32[0]; dst->addr6.s6_addr32[1] = src->addr6.s6_addr32[1]; dst->addr6.s6_addr32[2] = src->addr6.s6_addr32[2]; dst->addr6.s6_addr32[3] = src->addr6.s6_addr32[3]; } } static void mptcp_pm_copy_entry(struct mptcp_pm_addr_entry *dst, struct mptcp_pm_addr_entry *src) { mptcp_pm_copy_addr(&dst->addr, &src->addr); dst->flags = src->flags; dst->ifindex = src->ifindex; } ''' And add "write permission" for BPF to each field of mptcp_pm_addr_entry: ''' @@ static int bpf_mptcp_pm_btf_struct_access(struct bpf_verifier_log *log, case offsetof(struct mptcp_pm_addr_entry, addr.port): end = offsetofend(struct mptcp_pm_addr_entry, addr.port); break; #if IS_ENABLED(CONFIG_MPTCP_IPV6) case offsetof(struct mptcp_pm_addr_entry, addr.addr6.s6_addr32[0]): end = offsetofend(struct mptcp_pm_addr_entry, addr.addr6.s6_addr32[0]); break; case offsetof(struct mptcp_pm_addr_entry, addr.addr6.s6_addr32[1]): end = offsetofend(struct mptcp_pm_addr_entry, addr.addr6.s6_addr32[1]); break; case offsetof(struct mptcp_pm_addr_entry, addr.addr6.s6_addr32[2]): end = offsetofend(struct mptcp_pm_addr_entry, addr.addr6.s6_addr32[2]); break; case offsetof(struct mptcp_pm_addr_entry, addr.addr6.s6_addr32[3]): end = offsetofend(struct mptcp_pm_addr_entry, addr.addr6.s6_addr32[3]); break; #else case offsetof(struct mptcp_pm_addr_entry, addr.addr.s_addr): end = offsetofend(struct mptcp_pm_addr_entry, addr.addr.s_addr); break; #endif ''' But if there's a sock_kmemdup() helper, it will become much simpler, only need to call kfunc sock_kmemdup() instead in BPF. So this patchset adds this new helper and uses it in several places. [1] https://lore.kernel.org/mptcp/cover.1738924875.git.tanggeliang@kylinos.cn/ ==================== Link: https://patch.msgid.link/cover.1740735165.git.tanggeliang@kylinos.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03mptcp: use sock_kmemdup for address entryGeliang Tang
Instead of using sock_kmalloc() to allocate an address entry "e" and then immediately duplicate the input "entry" to it, the newly added sock_kmemdup() helper can be used in mptcp_userspace_pm_append_new_local_addr() to simplify the code. More importantly, the code "*e = *entry;" that assigns "entry" to "e" is not easy to implemented in BPF if we use the same code to implement an append_new_local_addr() helper of a BFP path manager. This patch avoids this type of memory assignment operation. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/3e5a307aed213038a87e44ff93b5793229b16279.1740735165.git.tanggeliang@kylinos.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03net: use sock_kmemdup for ip_optionsGeliang Tang
Instead of using sock_kmalloc() to allocate an ip_options and then immediately duplicate another ip_options to the newly allocated one in ipv6_dup_options(), mptcp_copy_ip_options() and sctp_v4_copy_ip_options(), the newly added sock_kmemdup() helper can be used to simplify the code. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/91ae749d66600ec6fb679e0e518fda6acb5c3e6f.1740735165.git.tanggeliang@kylinos.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03sock: add sock_kmemdup helperGeliang Tang
This patch adds the sock version of kmemdup() helper, named sock_kmemdup(), to duplicate the input "src" memory block using the socket's option memory buffer. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/f828077394c7d1f3560123497348b438c875b510.1740735165.git.tanggeliang@kylinos.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03Merge branch 'tcp-misc-changes'Jakub Kicinski
Eric Dumazet says: ==================== tcp: misc changes Minor changes, following recent changes in TCP stack. ==================== Link: https://patch.msgid.link/20250301201424.2046477-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03tcp: tcp_set_window_clamp() cleanupEric Dumazet
Remove one indentation level. Use max_t() and clamp() macros. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250301201424.2046477-7-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03tcp: remove READ_ONCE(req->ts_recent)Eric Dumazet
After commit 8d52da23b6c6 ("tcp: Defer ts_recent changes until req is owned"), req->ts_recent is not changed anymore. It is set once in tcp_openreq_init(), bpf_sk_assign_tcp_reqsk() or cookie_tcp_reqsk_alloc() before the req can be seen by other cpus/threads. This completes the revert of eba20811f326 ("tcp: annotate data-races around tcp_rsk(req)->ts_recent"). Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Wang Hai <wanghai38@huawei.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250301201424.2046477-6-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03net: gro: convert four dev_net() callsEric Dumazet
tcp4_check_fraglist_gro(), tcp6_check_fraglist_gro(), udp4_gro_lookup_skb() and udp6_gro_lookup_skb() assume RCU is held so that the net structure does not disappear. Use dev_net_rcu() instead of dev_net() to get LOCKDEP support. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250301201424.2046477-5-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03tcp: convert to dev_net_rcu()Eric Dumazet
TCP uses of dev_net() are under RCU protection, change them to dev_net_rcu() to get LOCKDEP support. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250301201424.2046477-4-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03tcp: add four drop reasons to tcp_check_req()Eric Dumazet
Use two existing drop reasons in tcp_check_req(): - TCP_RFC7323_PAWS - TCP_OVERWINDOW Add two new ones: - TCP_RFC7323_TSECR (corresponds to LINUX_MIB_TSECRREJECTED) - TCP_LISTEN_OVERFLOW (when a listener accept queue is full) Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250301201424.2046477-3-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03tcp: add a drop_reason pointer to tcp_check_req()Eric Dumazet
We want to add new drop reasons for packets dropped in 3WHS in the following patches. tcp_rcv_state_process() has to set reason to TCP_FASTOPEN, because tcp_check_req() will conditionally overwrite the drop_reason. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250301201424.2046477-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03Merge branch 'ipv4-fib-convert-rtm_newroute-and-rtm_delroute-to-per-netns-rtnl'Jakub Kicinski
Kuniyuki Iwashima says: ==================== ipv4: fib: Convert RTM_NEWROUTE and RTM_DELROUTE to per-netns RTNL. Patch 1 is misc cleanup. Patch 2 ~ 8 converts two fib_info hash tables to per-netns. Patch 9 ~ 12 converts rtnl_lock() to rtnl_net_lcok(). v2: https://lore.kernel.org/20250226192556.21633-1-kuniyu@amazon.com v1: https://lore.kernel.org/20250225182250.74650-1-kuniyu@amazon.com ==================== Link: https://patch.msgid.link/20250228042328.96624-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03ipv4: fib: Convert RTM_NEWROUTE and RTM_DELROUTE to per-netns RTNL.Kuniyuki Iwashima
We converted fib_info hash tables to per-netns one and now ready to convert RTM_NEWROUTE and RTM_DELROUTE to per-netns RTNL. Let's hold rtnl_net_lock() in inet_rtm_newroute() and inet_rtm_delroute(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250228042328.96624-13-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03ipv4: fib: Move fib_valid_key_len() to rtm_to_fib_config().Kuniyuki Iwashima
fib_valid_key_len() is called in the beginning of fib_table_insert() or fib_table_delete() to check if the prefix length is valid. fib_table_insert() and fib_table_delete() are called from 3 paths - ip_rt_ioctl() - inet_rtm_newroute() / inet_rtm_delroute() - fib_magic() In the first ioctl() path, rtentry_to_fib_config() checks the prefix length with bad_mask(). Also, fib_magic() always passes the correct prefix: 32 or ifa->ifa_prefixlen, which is already validated. Let's move fib_valid_key_len() to the rtnetlink path, rtm_to_fib_config(). While at it, 2 direct returns in rtm_to_fib_config() are changed to goto to match other places in the same function Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250228042328.96624-12-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03ipv4: fib: Hold rtnl_net_lock() in ip_rt_ioctl().Kuniyuki Iwashima
ioctl(SIOCADDRT/SIOCDELRT) calls ip_rt_ioctl() to add/remove a route in the netns of the specified socket. Let's hold rtnl_net_lock() there. Note that rtentry_to_fib_config() can be called without rtnl_net_lock() if we convert rtentry.dev handling to RCU later. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250228042328.96624-11-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03ipv4: fib: Hold rtnl_net_lock() for ip_fib_net_exit().Kuniyuki Iwashima
ip_fib_net_exit() requires RTNL and is called from fib_net_init() and fib_net_exit_batch(). Let's hold rtnl_net_lock() before ip_fib_net_exit(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250228042328.96624-10-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03ipv4: fib: Namespacify fib_info hash tables.Kuniyuki Iwashima
We will convert RTM_NEWROUTE and RTM_DELROUTE to per-netns RTNL. Then, we need to have per-netns hash tables for struct fib_info. Let's allocate the hash tables per netns. fib_info_hash, fib_info_hash_bits, and fib_info_cnt are now moved to struct netns_ipv4 and accessed with net->ipv4.fib_XXX. Also, the netns checks are removed from fib_find_info_nh() and fib_find_info(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250228042328.96624-9-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03ipv4: fib: Add fib_info_hash_grow().Kuniyuki Iwashima
When the number of struct fib_info exceeds the hash table size in fib_create_info(), we try to allocate a new hash table with the doubled size. The allocation is done in fib_create_info(), and if successful, each struct fib_info is moved to the new hash table by fib_info_hash_move(). Let's integrate the allocation and fib_info_hash_move() as fib_info_hash_grow() to make the following change cleaner. While at it, fib_info_hash_grow() is placed near other hash-table-specific functions. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250228042328.96624-8-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03ipv4: fib: Remove fib_info_hash_size.Kuniyuki Iwashima
We will allocate the fib_info hash tables per netns. There are 5 global variables for fib_info hash tables: fib_info_hash, fib_info_laddrhash, fib_info_hash_size, fib_info_hash_bits, fib_info_cnt. However, fib_info_laddrhash and fib_info_hash_size can be easily calculated from fib_info_hash and fib_info_hash_bits. Let's remove fib_info_hash_size and use (1 << fib_info_hash_bits) instead. Now we need not pass the new hash table size to fib_info_hash_move(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250228042328.96624-7-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03ipv4: fib: Remove fib_info_laddrhash pointer.Kuniyuki Iwashima
We will allocate the fib_info hash tables per netns. There are 5 global variables for fib_info hash tables: fib_info_hash, fib_info_laddrhash, fib_info_hash_size, fib_info_hash_bits, fib_info_cnt. However, fib_info_laddrhash and fib_info_hash_size can be easily calculated from fib_info_hash and fib_info_hash_bits. Let's remove the fib_info_laddrhash pointer and instead use fib_info_hash + (1 << fib_info_hash_bits). While at it, fib_info_laddrhash_bucket() is moved near other hash-table-specific functions. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250228042328.96624-6-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03ipv4: fib: Make fib_info_hashfn() return struct hlist_head.Kuniyuki Iwashima
Every time fib_info_hashfn() returns a hash value, we fetch &fib_info_hash[hash]. Let's return the hlist_head pointer from fib_info_hashfn() and rename it to fib_info_hash_bucket() to match a similar function, fib_info_laddrhash_bucket(). Note that we need to move the fib_info_hash assignment earlier in fib_info_hash_move() to use fib_info_hash_bucket() in the for loop. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250228042328.96624-5-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03ipv4: fib: Allocate fib_info_hash[] during netns initialisation.Kuniyuki Iwashima
We will allocate fib_info_hash[] and fib_info_laddrhash[] for each netns. Currently, fib_info_hash[] is allocated when the first route is added. Let's move the first allocation to a new __net_init function. Note that we must call fib4_semantics_exit() in fib_net_exit_batch() because ->exit() is called earlier than ->exit_batch(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250228042328.96624-4-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03ipv4: fib: Allocate fib_info_hash[] and fib_info_laddrhash[] by kvcalloc().Kuniyuki Iwashima
Both fib_info_hash[] and fib_info_laddrhash[] are hash tables for struct fib_info and are allocated by kvzmalloc() separately. Let's replace the two kvzmalloc() calls with kvcalloc() to remove the fib_info_laddrhash pointer later. Note that fib_info_hash_alloc() allocates a new hash table based on fib_info_hash_bits because we will remove fib_info_hash_size later. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250228042328.96624-3-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03ipv4: fib: Use cached net in fib_inetaddr_event().Kuniyuki Iwashima
net is available in fib_inetaddr_event(), let's use it. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250228042328.96624-2-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-03selftests: net: report output format as TAP 13 in Python testsJakub Kicinski
The Python lib based tests report that they are producing "KTAP version 1", but really we aren't making use of any KTAP features, like subtests. Our output is plain TAP. Report TAP 13 instead of KTAP 1, this is what mptcp tests do, and what NIPA knows how to parse best. For HW testing we need precise subtest result tracking. Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250228180007.83325-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-28Merge branch 'add-usb-net-support-for-telit-cinterion-fn990b'Jakub Kicinski
Fabio Porcedda says: ==================== Add usb net support for Telit Cinterion FN990B Add usb net support for Telit Cinterion FE990B. Also fix Telit Cinterion FE990A name. Connection with ModemManager was tested also AT ports. There is a different patch set for the usb option part. 0x10b0: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10b0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=28c2595e C: #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10b1: MBIM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10b1 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=28c2595e C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10b2: RNDIS + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10b2 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=28c2595e C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10d3: ECM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10b3 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=28c2595e C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms ==================== Link: https://patch.msgid.link/20250227112441.3653819-1-fabio.porcedda@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-28net: usb: cdc_mbim: fix Telit Cinterion FE990A nameFabio Porcedda
The correct name for FE990 is FE990A so use it in order to avoid confusion with FE990B. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Link: https://patch.msgid.link/20250227112441.3653819-4-fabio.porcedda@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-28net: usb: qmi_wwan: fix Telit Cinterion FE990A nameFabio Porcedda
The correct name for FE990 is FE990A so use it in order to avoid confusion with FE990B. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Link: https://patch.msgid.link/20250227112441.3653819-3-fabio.porcedda@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-28net: usb: qmi_wwan: add Telit Cinterion FE990B compositionFabio Porcedda
Add the following Telit Cinterion FE990B composition: 0x10b0: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb usb-devices: T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10b0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=28c2595e C: #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Link: https://patch.msgid.link/20250227112441.3653819-2-fabio.porcedda@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-16 19:21:31 +0000