summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-18Merge tag '4.3-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs updates from Steve French: "Fixes (three for stable) and improvements including much faster encryption (SMB3.1.1 GCM)" * tag '4.3-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: (27 commits) smb3: smbdirect no longer experimental cifs: fix crash in smb2_compound_op()/smb2_set_next_command() cifs: fix crash in cifs_dfs_do_automount cifs: fix parsing of symbolic link error response cifs: refactor and clean up arguments in the reparse point parsing SMB3: query inode number on open via create context smb3: Send netname context during negotiate protocol smb3: do not send compression info by default smb3: add new mount option to retrieve mode from special ACE smb3: Allow query of symlinks stored as reparse points cifs: Fix a race condition with cifs_echo_request cifs: always add credits back for unsolicited PDUs fs: cifs: cifsssmb: Change return type of convert_ace_to_cifs_ace add some missing definitions cifs: fix typo in debug message with struct field ia_valid smb3: minor cleanup of compound_send_recv CIFS: Fix module dependency cifs: simplify code by removing CONFIG_CIFS_ACL ifdef cifs: Fix check for matching with existing mount cifs: Properly handle auto disabling of serverino option ...
2019-07-18Merge tag 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph updates from Ilya Dryomov: "Lots of exciting things this time! - support for rbd object-map and fast-diff features (myself). This will speed up reads, discards and things like snap diffs on sparse images. - ceph.snap.btime vxattr to expose snapshot creation time (David Disseldorp). This will be used to integrate with "Restore Previous Versions" feature added in Windows 7 for folks who reexport ceph through SMB. - security xattrs for ceph (Zheng Yan). Only selinux is supported for now due to the limitations of ->dentry_init_security(). - support for MSG_ADDR2, FS_BTIME and FS_CHANGE_ATTR features (Jeff Layton). This is actually a single feature bit which was missing because of the filesystem pieces. With this in, the kernel client will finally be reported as "luminous" by "ceph features" -- it is still being reported as "jewel" even though all required Luminous features were implemented in 4.13. - stop NULL-terminating ceph vxattrs (Jeff Layton). The convention with xattrs is to not terminate and this was causing inconsistencies with ceph-fuse. - change filesystem time granularity from 1 us to 1 ns, again fixing an inconsistency with ceph-fuse (Luis Henriques). On top of this there are some additional dentry name handling and cap flushing fixes from Zheng. Finally, Jeff is formally taking over for Zheng as the filesystem maintainer" * tag 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-client: (71 commits) ceph: fix end offset in truncate_inode_pages_range call ceph: use generic_delete_inode() for ->drop_inode ceph: use ceph_evict_inode to cleanup inode's resource ceph: initialize superblock s_time_gran to 1 MAINTAINERS: take over for Zheng as CephFS kernel client maintainer rbd: setallochint only if object doesn't exist rbd: support for object-map and fast-diff rbd: call rbd_dev_mapping_set() from rbd_dev_image_probe() libceph: export osd_req_op_data() macro libceph: change ceph_osdc_call() to take page vector for response libceph: bump CEPH_MSG_MAX_DATA_LEN (again) rbd: new exclusive lock wait/wake code rbd: quiescing lock should wait for image requests rbd: lock should be quiesced on reacquire rbd: introduce copyup state machine rbd: rename rbd_obj_setup_*() to rbd_obj_init_*() rbd: move OSD request allocation into object request state machines rbd: factor out __rbd_osd_setup_discard_ops() rbd: factor out rbd_osd_setup_copyup() rbd: introduce obj_req->osd_reqs list ...
2019-07-18Merge tag 'dax-for-5.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull dax updates from Dan Williams: "The fruits of a bug hunt in the fsdax implementation with Willy and a small feature update for device-dax: - Fix a hang condition that started triggering after the Xarray conversion of fsdax in the v4.20 kernel. - Add a 'resource' (root-only physical base address) sysfs attribute to device-dax instances to correlate memory-blocks onlined via the kmem driver with a given device instance" * tag 'dax-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax: Fix missed wakeup with PMD faults device-dax: Add a 'resource' attribute
2019-07-18Merge tag 'libnvdimm-for-5.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "Primarily just the virtio_pmem driver: - virtio_pmem The new virtio_pmem facility introduces a paravirtualized persistent memory device that allows a guest VM to use DAX mechanisms to access a host-file with host-page-cache. It arranges for MAP_SYNC to be disabled and instead triggers a host fsync() when a 'write-cache flush' command is sent to the virtual disk device. - Miscellaneous small fixups" * tag 'libnvdimm-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: virtio_pmem: fix sparse warning xfs: disable map_sync for async flush ext4: disable map_sync for async flush dax: check synchronous mapping is supported dm: enable synchronous dax libnvdimm: add dax_dev sync flag virtio-pmem: Add virtio pmem driver libnvdimm: nd_region flush callback support libnvdimm, namespace: Drop uuid_t implementation detail
2019-07-18Merge tag 'linux-watchdog-5.3-rc1' of ↵Linus Torvalds
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - add Allwinner H6 watchdog - drop warning after registering device patches - hpwdt improvements - gpio: add support for nowayout option - introduce CONFIG_WATCHDOG_OPEN_TIMEOUT - convert remaining drivers to use SPDX license identifier - Fixes and improvements on several watchdog device drivers * tag 'linux-watchdog-5.3-rc1' of git://www.linux-watchdog.org/linux-watchdog: (74 commits) watchdog: digicolor_wdt: Remove unused variable in dc_wdt_probe watchdog: ie6xx_wdt: Use spinlock_t instead of struct spinlock watchdog: atmel: atmel-sama5d4-wdt: Disable watchdog on system suspend watchdog: convert remaining drivers to use SPDX license identifier dt-bindings: watchdog: Rename bindings documentation file watchdog: mei_wdt: no need to check return value of debugfs_create functions watchdog: bcm_kona_wdt: no need to check return value of debugfs_create functions docs: watchdog: Fix build error. docs: watchdog: convert docs to ReST and rename to *.rst watchdog: make the device time out at open_deadline when open_timeout is used watchdog: introduce CONFIG_WATCHDOG_OPEN_TIMEOUT watchdog: introduce watchdog.open_timeout commandline parameter dt-bindings: watchdog: move i.MX system controller watchdog binding to SCU watchdog: imx_sc: Add pretimeout support watchdog: renesas_wdt: Add a few cycles delay watchdog: gpio: add support for nowayout option watchdog: renesas_wdt: Use 'dev' instead of dereferencing it repeatedly dt-bindings: watchdog: add Allwinner H6 watchdog watchdog: jz4740: Avoid starting watchdog in set_timeout watchdog: jz4740: Use register names from <linux/mfd/ingenic-tcu.h> ...
2019-07-18Merge tag 'sound-fix-5.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small fixes. - The optimization of PM resume with HD-audio HDMI codecs, which eventually work around weird issues - A correction of Intel Icelake HDMI audio code - Quirks for Dell machines with Realtek HD-audio codecs - The fix for too long sequencer write stall that was spotted by syzkaller - A few trivial cleanups reported by coccinelle" * tag 'sound-fix-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Don't resume forcibly i915 HDMI/DP codec ALSA: hda/hdmi - Fix i915 reverse port/pin mapping ALSA: hda/hdmi - Remove duplicated define ALSA: seq: Break too long mutex context in the write loop ALSA: hda/realtek: apply ALC891 headset fixup to one Dell machine ALSA: rme9652: Unneeded variable: "result". ALSA: emu10k1: Remove unneeded variable "change" ALSA: au88x0: Remove unneeded variable: "changed" ALSA: hda/realtek - Fixed Headphone Mic can't record on Dell platform ALSA: ps3: Remove Unneeded variable: "ret" ALSA: lx6464es: Remove unneeded variable err
2019-07-18Merge tag 'pm-5.3-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These modify the Intel RAPL driver to allow it to use an MMIO interface to the hardware, make the int340X thermal driver provide such an interface for it, add Intel Ice Lake CPU IDs to the RAPL driver (these changes depend on the previously merged x86 arch changes), update cpufreq to use the PM QoS framework for managing the min and max frequency limits, and add update the imx-cpufreq-dt cpufreq driver to support i.MX8MN. Specifics: - Add MMIO interface support to the Intel RAPL power capping driver and update the int340X thermal driver to provide a RAPL MMIO interface (Zhang Rui, Stephen Rothwell). - Add Intel Ice Lake CPU IDs to the RAPL driver (Zhang Rui, Rajneesh Bhardwaj). - Make cpufreq use the PM QoS framework (instead of notifiers) for managing the min and max frequency constraints (Viresh Kumar). - Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson Huang)" * tag 'pm-5.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits) cpufreq: Make cpufreq_generic_init() return void intel_rapl: need linux/cpuhotplug.h for enum cpuhp_state powercap/rapl: Add Ice Lake NNPI support to RAPL driver powercap/intel_rapl: add support for ICX-D powercap/intel_rapl: add support for ICX powercap/intel_rapl: add support for IceLake desktop intel_rapl: Fix module autoloading issue int340X/processor_thermal_device: add support for MMIO RAPL intel_rapl: support two power limits for every RAPL domain intel_rapl: support 64 bit register intel_rapl: abstract RAPL common code intel_rapl: cleanup hardcoded MSR access intel_rapl: cleanup some functions intel_rapl: abstract register access operations intel_rapl: abstract register address intel_rapl: introduce struct rapl_if_private intel_rapl: introduce intel_rapl.h intel_rapl: remove hardcoded register index intel_rapl: use reg instead of msr cpufreq: imx-cpufreq-dt: Add i.MX8MN support ...
2019-07-18Merge tag 'acpi-5.3-rc1-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "These get rid of two clang warnings, add a new quirk mechanism to the ACPI backlight driver (and apply it to one machine) and update the table load object initialization in ACPICA (this is a replacement for a previously reverted ACPICA commit). Specifics: - Make ACPI table loading work more consistently regardless of the exact mechanism used for loading a table (Erik Schmauss). - Get rid of two clang warnings (Arnd Bergmann). - Add new quirk mechanism to the ACPI backlight driver and use it to add a quirk for PB Easynote MZ35 (Hans de Goede)" * tag 'acpi-5.3-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: video: Add new hw_changes_brightness quirk, set it on PB Easynote MZ35 ACPI: fix false-positive -Wuninitialized warning ACPI: blacklist: fix clang warning for unused DMI table ACPICA: Update table load object initialization
2019-07-18Merge branch 'floppy'Linus Torvalds
Merge floppy ioctl verification fixes from Denis Efremov. This also marks the floppy driver as orphaned - it turns out that Jiri no longer has working hardware. Actual working physical floppy hardware is getting hard to find, and while Willy was able to test this, I think the driver can be considered pretty much dead from an actual hardware standpoint. The hardware that is still sold seems to be mainly USB-based, which doesn't use this legacy driver at all. The old floppy disk controller is still emulated in various VM environments, so the driver isn't going away, but let's see if anybody is interested to step up to maintain it. The lack of hardware also likely means that the ioctl range verification fixes are probably mostly relevant to anybody using floppies in a virtual environment. Which is probably also going away in favor of USB storage emulation, but who knows. Will Decon reviewed the patches but I'm not rebasing them just for that, so I'll add a Reviewed-by: Will Deacon <will@kernel.org> here instead. * floppy: MAINTAINERS: mark floppy.c orphaned floppy: fix out-of-bounds read in copy_buffer floppy: fix invalid pointer dereference in drive_name floppy: fix out-of-bounds read in next_valid_format floppy: fix div-by-zero in setup_format_params
2019-07-18MAINTAINERS: mark floppy.c orphanedJiri Kosina
I volunteered myself to maintain it quite some time ago back when I fixed the concurrency issues which exhibited itself only with VM-emulated devices, and at the same time I still had the physical 3.5" reader to test all the changes. The reader doesn't work any more though, so I guess it's time to step down from this super-prestigious role :p and mark floppy.c as Orphaned. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18riscv: fix build break after macro-to-function conversion in generic ↵Paul Walmsley
cacheflush.h Commit c296d4dc13ae ("asm-generic: fix a compilation warning") converted the various flush_*cache_* macros in asm-generic/cacheflush.h to static inline functions. This breaks RISC-V builds, since RISC-V's cacheflush.h includes the generic cacheflush.h and then undefines the macros to be overridden. Fix by copying the subset of the no-op functions that are reused from the generic cacheflush.h into the RISC-V cacheflush.h, and dropping the include of the generic cacheflush.h. Fixes: c296d4dc13ae ("asm-generic: fix a compilation warning") Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Cc: Qian Cai <cai@lca.pw> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18stacktrace: Force USER_DS for stack_trace_save_user()Peter Zijlstra
When walking userspace stacks, USER_DS needs to be set, otherwise access_ok() will not function as expected. Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Reported-by: Eiichi Tsukata <devel@etsukata.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Vegard Nossum <vegard.nossum@oracle.com> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Link: https://lkml.kernel.org/r/20190718085754.GM3402@hirez.programming.kicks-ass.net
2019-07-18Merge branches 'acpi-misc' and 'acpi-video'Rafael J. Wysocki
* acpi-misc: ACPI: fix false-positive -Wuninitialized warning ACPI: blacklist: fix clang warning for unused DMI table * acpi-video: ACPI: video: Add new hw_changes_brightness quirk, set it on PB Easynote MZ35
2019-07-18Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: cpufreq: Make cpufreq_generic_init() return void cpufreq: imx-cpufreq-dt: Add i.MX8MN support cpufreq: Add QoS requests for userspace constraints cpufreq: intel_pstate: Reuse refresh_frequency_limits() cpufreq: Register notifiers with the PM QoS framework PM / QoS: Add support for MIN/MAX frequency constraints PM / QOS: Pass request type to dev_pm_qos_read_value() PM / QOS: Rename __dev_pm_qos_read_value() and dev_pm_qos_raw_read_value() PM / QOS: Pass request type to dev_pm_qos_{add|remove}_notifier()
2019-07-18padata: use smp_mb in padata_reorder to avoid orphaned padata jobsDaniel Jordan
Testing padata with the tcrypt module on a 5.2 kernel... # modprobe tcrypt alg="pcrypt(rfc4106(gcm(aes)))" type=3 # modprobe tcrypt mode=211 sec=1 ...produces this splat: INFO: task modprobe:10075 blocked for more than 120 seconds. Not tainted 5.2.0-base+ #16 modprobe D 0 10075 10064 0x80004080 Call Trace: ? __schedule+0x4dd/0x610 ? ring_buffer_unlock_commit+0x23/0x100 schedule+0x6c/0x90 schedule_timeout+0x3b/0x320 ? trace_buffer_unlock_commit_regs+0x4f/0x1f0 wait_for_common+0x160/0x1a0 ? wake_up_q+0x80/0x80 { crypto_wait_req } # entries in braces added by hand { do_one_aead_op } { test_aead_jiffies } test_aead_speed.constprop.17+0x681/0xf30 [tcrypt] do_test+0x4053/0x6a2b [tcrypt] ? 0xffffffffa00f4000 tcrypt_mod_init+0x50/0x1000 [tcrypt] ... The second modprobe command never finishes because in padata_reorder, CPU0's load of reorder_objects is executed before the unlocking store in spin_unlock_bh(pd->lock), causing CPU0 to miss CPU1's increment: CPU0 CPU1 padata_reorder padata_do_serial LOAD reorder_objects // 0 INC reorder_objects // 1 padata_reorder TRYLOCK pd->lock // failed UNLOCK pd->lock CPU0 deletes the timer before returning from padata_reorder and since no other job is submitted to padata, modprobe waits indefinitely. Add a pair of full barriers to guarantee proper ordering: CPU0 CPU1 padata_reorder padata_do_serial UNLOCK pd->lock smp_mb() LOAD reorder_objects INC reorder_objects smp_mb__after_atomic() padata_reorder TRYLOCK pd->lock smp_mb__after_atomic is needed so the read part of the trylock operation comes after the INC, as Andrea points out. Thanks also to Andrea for help with writing a litmus test. Fixes: 16295bec6398 ("padata: Generic parallelization/serialization interface") Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: <stable@vger.kernel.org> Cc: Andrea Parri <andrea.parri@amarulasolutions.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: linux-arch@vger.kernel.org Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-18crypto: ccp - Fix SEV_VERSION_GREATER_OR_EQUALDavid Rientjes
SEV_VERSION_GREATER_OR_EQUAL() will fail if upgrading from 2.2 to 3.1, for example, because the minor version is not equal to or greater than the major. Fix this and move to a static inline function for appropriate type checking. Fixes: edd303ff0e9e ("crypto: ccp - Add DOWNLOAD_FIRMWARE SEV command") Reported-by: Cfir Cohen <cfir@google.com> Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Acked-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-18crypto: ccp/gcm - use const time tag comparison.Cfir Cohen
Avoid leaking GCM tag through timing side channel. Fixes: 36cf515b9bbe ("crypto: ccp - Enable support for AES GCM on v5 CCPs") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: Cfir Cohen <cfir@google.com> Acked-by: Gary R Hook <ghook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-18SUNRPC: Fix up backchannel slot table accountingTrond Myklebust
Add a per-transport maximum limit in the socket case, and add helpers to allow the NFSv4 code to discover that limit. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-18SUNRPC: Fix initialisation of struct rpc_xprt_switchTrond Myklebust
Ensure that we do initialise the fields xps_nactive, xps_queuelen and xps_net. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-18Merge tag 'drm-misc-next-fixes-2019-07-11' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next Pull request for drm-misc-fixes-next for v5.3: - Revert properties exposed in komeda that need improvement before they become ABI. - Only add modes from the cmdline if they are valid. - Add orientation quirk for GPD MicroPC. - Reduce stack usage in drm selftests. - Fix bochs framebuffer setup. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e6b84ce4-2728-fb02-87c1-6a6b87703c0b@linux.intel.com
2019-07-18xen: let alloc_xenballooned_pages() fail if not enough memory freeJuergen Gross
Instead of trying to allocate pages with GFP_USER in add_ballooned_pages() check the available free memory via si_mem_available(). GFP_USER is far less limiting memory exhaustion than the test via si_mem_available(). This will avoid dom0 running out of memory due to excessive foreign page mappings especially on ARM and on x86 in PVH mode, as those don't have a pre-ballooned area which can be used for foreign mappings. As the normal ballooning suffers from the same problem don't balloon down more than si_mem_available() pages in one iteration. At the same time limit the default maximum number of retries. This is part of XSA-300. Signed-off-by: Juergen Gross <jgross@suse.com>
2019-07-18objtool: Rename elf_open() to prevent conflict with libelf from elftoolchainMichael Forney
The elftoolchain version of libelf has a function named elf_open(). The function name isn't quite accurate anyway, since it also reads all the ELF data. Rename it to elf_read(), which is more accurate. [ jpoimboe: rename to elf_read(); write commit description ] Signed-off-by: Michael Forney <mforney@mforney.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/7ce2d1b35665edf19fd0eb6fbc0b17b81a48e62f.1562793604.git.jpoimboe@redhat.com
2019-07-18objtool: Use Elf_Scn typedef instead of assuming struct nameMichael Forney
The libelf implementation might use a different struct name, and the Elf_Scn typedef is already used throughout the rest of objtool. Signed-off-by: Michael Forney <mforney@mforney.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/d270e1be2835fc2a10acf67535ff2ebd2145bf43.1562793448.git.jpoimboe@redhat.com
2019-07-18Merge tag 'perf-core-for-mingo-5.3-20190715' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: perf db-export: Adrian Hunter: - Improvements in how COMM details are exported to databases for post processing and use in the sql-viewer.py UI. - Export switch events to the database. BPF: Arnaldo Carvalho de Melo: - Bump rlimit(MEMLOCK) for 'perf test bpf' and 'perf trace', just like selftests/bpf/bpf_rlimit.h do, which makes errors due to exhaustion of this limit, which are kinda cryptic (EPERM sometimes) less frequent. perf version: Ravi Bangoria: - Fix segfault due to missing OPT_END(), noticed on PowerPC. perf vendor events: Thomas Richter: - Add JSON files for IBM s/390 machine type 8561. perf cs-etm (ARM): YueHaibing: - Fix two cases of error returns not bing done properly: Invalid ERR_PTR() use and loss of propagation error codes.
2019-07-17ipv6: rt6_check should return NULL if 'from' is NULLDavid Ahern
Paul reported that l2tp sessions were broken after the commit referenced in the Fixes tag. Prior to this commit rt6_check returned NULL if the rt6_info 'from' was NULL - ie., the dst_entry was disconnected from a FIB entry. Restore that behavior. Fixes: 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes") Reported-by: Paul Donohue <linux-kernel@PaulSD.com> Tested-by: Paul Donohue <linux-kernel@PaulSD.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-17tipc: initialize 'validated' field of received packetsJon Maloy
The tipc_msg_validate() function leaves a boolean flag 'validated' in the validated buffer's control block, to avoid performing this action more than once. However, at reception of new packets, the position of this field may already have been set by lower layer protocols, so that the packet is erroneously perceived as already validated by TIPC. We fix this by initializing the said field to 'false' before performing the initial validation. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-17Merge branch 'ipv4-relax-source-validation-check-for-loopback-packets'David S. Miller
Cong Wang says: ==================== ipv4: relax source validation check for loopback packets This patchset fixes a corner case when loopback packets get dropped by rp_filter when we route them from veth to lo. Patch 1 is the fix and patch 2 provides a simplified test case for this scenario. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-17selftests: add a test case for rp_filterCong Wang
Add a test case to simulate the loopback packet case fixed in the previous patch. This test gets passed after the fix: IPv4 rp_filter tests TEST: rp_filter passes local packets [ OK ] TEST: rp_filter passes loopback packets [ OK ] Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-17fib: relax source validation check for loopback packetsCong Wang
In a rare case where we redirect local packets from veth to lo, these packets fail to pass the source validation when rp_filter is turned on, as the tracing shows: <...>-311708 [040] ..s1 7951180.957825: fib_table_lookup: table 254 oif 0 iif 1 src 10.53.180.130 dst 10.53.180.130 tos 0 scope 0 flags 0 <...>-311708 [040] ..s1 7951180.957826: fib_table_lookup_nh: nexthop dev eth0 oif 4 src 10.53.180.130 So, the fib table lookup returns eth0 as the nexthop even though the packets are local and should be routed to loopback nonetheless, but they can't pass the dev match check in fib_info_nh_uses_dev() without this patch. It should be safe to relax this check for this special case, as normally packets coming out of loopback device still have skb_dst so they won't even hit this slow path. Cc: Julian Anastasov <ja@ssi.bg> Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-17Merge branch 'mlxsw-Two-fixes'David S. Miller
Ido Schimmel says: ==================== mlxsw: Two fixes This patchset contains two fixes for mlxsw. Patch #1 from Petr fixes an issue in which DSCP rewrite can occur even if the egress port was switched to Trust L2 mode where priority mapping is based on PCP. Patch #2 fixes a problem where packets can be learned on a non-existing FID if a tc filter with a redirect action is configured on a bridged port. The problem and fix are explained in detail in the commit message. Please consider both patches for 5.2.y ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-17mlxsw: spectrum: Do not process learned records with a dummy FIDIdo Schimmel
The switch periodically sends notifications about learned FDB entries. Among other things, the notification includes the FID (Filtering Identifier) and the port on which the MAC was learned. In case the driver does not have the FID defined on the relevant port, the following error will be periodically generated: mlxsw_spectrum2 0000:06:00.0 swp32: Failed to find a matching {Port, VID} following FDB notification This is not supposed to happen under normal conditions, but can happen if an ingress tc filter with a redirect action is installed on a bridged port. The redirect action will cause the packet's FID to be changed to the dummy FID and a learning notification will be emitted with this FID - which is not defined on the bridged port. Fix this by having the driver ignore learning notifications generated with the dummy FID and delete them from the device. Another option is to chain an ignore action after the redirect action which will cause the device to disable learning, but this means that we need to consume another action whenever a redirect action is used. In addition, the scenario described above is merely a corner case. Fixes: cedbb8b25948 ("mlxsw: spectrum_flower: Set dummy FID before forward action") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Alex Kushnarov <alexanderk@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Tested-by: Alex Kushnarov <alexanderk@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-17mlxsw: spectrum_dcb: Configure DSCP map as the last rule is removedPetr Machata
Spectrum systems use DSCP rewrite map to update DSCP field in egressing packets to correspond to priority that the packet has. Whether rewriting will take place is determined at the point when the packet ingresses the switch: if the port is in Trust L3 mode, packet priority is determined from the DSCP map at the port, and DSCP rewrite will happen. If the port is in Trust L2 mode, 802.1p is used for packet prioritization, and no DSCP rewrite will happen. The driver determines the port trust mode based on whether any DSCP prioritization rules are in effect at given port. If there are any, trust level is L3, otherwise it's L2. When the last DSCP rule is removed, the port is switched to trust L2. Under that scenario, if DSCP of a packet should be rewritten, it should be rewritten to 0. However, when switching to Trust L2, the driver neglects to also update the DSCP rewrite map. The last DSCP rule thus remains in effect, and packets egressing through this port, if they have the right priority, will have their DSCP set according to this rule. Fix by first configuring the rewrite map, and only then switching to trust L2 and bailing out. Fixes: b2b1dab6884e ("mlxsw: spectrum: Support ieee_setapp, ieee_delapp") Signed-off-by: Petr Machata <petrm@mellanox.com> Reported-by: Alex Veber <alexve@mellanox.com> Tested-by: Alex Veber <alexve@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-17net: ag71xx: Add missing headerRosen Penev
ag71xx uses devm_ioremap_nocache. This fixes usage of an implicit function Fixes: d51b6ce441d3 ("net: ethernet: add ag71xx driver") Signed-off-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-17floppy: fix out-of-bounds read in copy_bufferDenis Efremov
This fixes a global out-of-bounds read access in the copy_buffer function of the floppy driver. The FDDEFPRM ioctl allows one to set the geometry of a disk. The sect and head fields (unsigned int) of the floppy_drive structure are used to compute the max_sector (int) in the make_raw_rw_request function. It is possible to overflow the max_sector. Next, max_sector is passed to the copy_buffer function and used in one of the memcpy calls. An unprivileged user could trigger the bug if the device is accessible, but requires a floppy disk to be inserted. The patch adds the check for the .sect * .head multiplication for not overflowing in the set_geometry function. The bug was found by syzkaller. Signed-off-by: Denis Efremov <efremov@ispras.ru> Tested-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-17floppy: fix invalid pointer dereference in drive_nameDenis Efremov
This fixes the invalid pointer dereference in the drive_name function of the floppy driver. The native_format field of the struct floppy_drive_params is used as floppy_type array index in the drive_name function. Thus, the field should be checked the same way as the autodetect field. To trigger the bug, one could use a value out of range and set the drive parameters with the FDSETDRVPRM ioctl. Next, FDGETDRVTYP ioctl should be used to call the drive_name. A floppy disk is not required to be inserted. CAP_SYS_ADMIN is required to call FDSETDRVPRM. The patch adds the check for a value of the native_format field to be in the '0 <= x < ARRAY_SIZE(floppy_type)' range of the floppy_type array indices. The bug was found by syzkaller. Signed-off-by: Denis Efremov <efremov@ispras.ru> Tested-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-17floppy: fix out-of-bounds read in next_valid_formatDenis Efremov
This fixes a global out-of-bounds read access in the next_valid_format function of the floppy driver. The values from autodetect field of the struct floppy_drive_params are used as indices for the floppy_type array in the next_valid_format function 'floppy_type[DP->autodetect[probed_format]].sect'. To trigger the bug, one could use a value out of range and set the drive parameters with the FDSETDRVPRM ioctl. A floppy disk is not required to be inserted. CAP_SYS_ADMIN is required to call FDSETDRVPRM. The patch adds the check for values of the autodetect field to be in the '0 <= x < ARRAY_SIZE(floppy_type)' range of the floppy_type array indices. The bug was found by syzkaller. Signed-off-by: Denis Efremov <efremov@ispras.ru> Tested-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-17floppy: fix div-by-zero in setup_format_paramsDenis Efremov
This fixes a divide by zero error in the setup_format_params function of the floppy driver. Two consecutive ioctls can trigger the bug: The first one should set the drive geometry with such .sect and .rate values for the F_SECT_PER_TRACK to become zero. Next, the floppy format operation should be called. A floppy disk is not required to be inserted. An unprivileged user could trigger the bug if the device is accessible. The patch checks F_SECT_PER_TRACK for a non-zero value in the set_geometry function. The proper check should involve a reasonable upper limit for the .sect and .rate fields, but it could change the UAPI. The patch also checks F_SECT_PER_TRACK in the setup_format_params, and cancels the formatting operation in case of zero. The bug was found by syzkaller. Signed-off-by: Denis Efremov <efremov@ispras.ru> Tested-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-17x86/mm, tracing: Fix CR2 corruptionPeter Zijlstra
Despite the current efforts to read CR2 before tracing happens there still exist a number of possible holes: idtentry page_fault do_page_fault has_error_code=1 call error_entry TRACE_IRQS_OFF call trace_hardirqs_off* #PF // modifies CR2 CALL_enter_from_user_mode __context_tracking_exit() trace_user_exit(0) #PF // modifies CR2 call do_page_fault address = read_cr2(); /* whoopsie */ And similar for i386. Fix it by pulling the CR2 read into the entry code, before any of that stuff gets a chance to run and ruin things. Reported-by: He Zhe <zhe.he@windriver.com> Reported-by: Eiichi Tsukata <devel@etsukata.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Cc: bp@alien8.de Cc: rostedt@goodmis.org Cc: torvalds@linux-foundation.org Cc: hpa@zytor.com Cc: dave.hansen@linux.intel.com Cc: jgross@suse.com Cc: joel@joelfernandes.org Link: https://lkml.kernel.org/r/20190711114336.116812491@infradead.org Debugged-by: Steven Rostedt <rostedt@goodmis.org>
2019-07-17x86/entry/64: Update comments and sanity tests for create_gapPeter Zijlstra
Commit 2700fefdb2d9 ("x86_64: Add gap to int3 to allow for call emulation") forgot to update the comment, do so now. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: bp@alien8.de Cc: torvalds@linux-foundation.org Cc: hpa@zytor.com Cc: dave.hansen@linux.intel.com Cc: jgross@suse.com Cc: zhe.he@windriver.com Cc: joel@joelfernandes.org Cc: devel@etsukata.com Link: https://lkml.kernel.org/r/20190711114336.059780563@infradead.org
2019-07-17x86/entry/64: Simplify idtentry a littlePeter Zijlstra
There's a bunch of duplication in idtentry, namely the .Lfrom_usermode_switch_stack is a paranoid=0 copy of the normal flow. Make this explicit by creating a idtentry_part helper macro. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: bp@alien8.de Cc: torvalds@linux-foundation.org Cc: hpa@zytor.com Cc: dave.hansen@linux.intel.com Cc: jgross@suse.com Cc: zhe.he@windriver.com Cc: joel@joelfernandes.org Cc: devel@etsukata.com Link: https://lkml.kernel.org/r/20190711114336.002429503@infradead.org
2019-07-17x86/entry/32: Simplify common_exceptionPeter Zijlstra
Adding one more option to SAVE_ALL can be used in common_exception to simplify things. This also saves duplication later where page_fault will no longer use common_exception. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Andy Lutomirski <luto@kernel.org> Cc: bp@alien8.de Cc: torvalds@linux-foundation.org Cc: hpa@zytor.com Cc: dave.hansen@linux.intel.com Cc: jgross@suse.com Cc: zhe.he@windriver.com Cc: joel@joelfernandes.org Cc: devel@etsukata.com Link: https://lkml.kernel.org/r/20190711114335.945136187@infradead.org
2019-07-17x86/paravirt: Make read_cr2() CALLEE_SAVEPeter Zijlstra
The one paravirt read_cr2() implementation (Xen) is actually quite trivial and doesn't need to clobber anything other than the return register. Making read_cr2() CALLEE_SAVE avoids all the PUSH/POP nonsense and allows more convenient use from assembly. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: bp@alien8.de Cc: rostedt@goodmis.org Cc: luto@kernel.org Cc: torvalds@linux-foundation.org Cc: hpa@zytor.com Cc: dave.hansen@linux.intel.com Cc: zhe.he@windriver.com Cc: joel@joelfernandes.org Cc: devel@etsukata.com Link: https://lkml.kernel.org/r/20190711114335.887392493@infradead.org
2019-07-17parisc: Wire up clone3 syscallHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de> Tested-by: Sven Schnelle <svens@stackframe.org> Acked-by: Christian Brauner <christian@brauner.io>
2019-07-17parisc: Avoid kernel panic triggered by invalid kprobeHelge Deller
When running gdb I was able to trigger this kernel panic: Kernel Fault: Code=26 (Data memory access rights trap) at addr 0000000000000060 CPU: 0 PID: 1401 Comm: gdb-crash Not tainted 5.2.0-rc7-64bit+ #1053 YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00001000000001000000000000001111 Not tainted r00-03 000000000804000f 0000000040dee1a0 0000000040c78cf0 00000000b8d50160 r04-07 0000000040d2b1a0 000000004360a098 00000000bbbe87b8 0000000000000003 r08-11 00000000fac20a70 00000000fac24160 00000000fac1bbe0 0000000000000000 r12-15 00000000fabfb79a 00000000fac244a4 0000000000010000 0000000000000001 r16-19 00000000bbbe87b8 00000000f8f02910 0000000000010034 0000000000000000 r20-23 00000000fac24630 00000000fac24630 000000006474e552 00000000fac1aa52 r24-27 0000000000000028 00000000bbbe87b8 00000000bbbe87b8 0000000040d2b1a0 r28-31 0000000000000000 00000000b8d501c0 00000000b8d501f0 0000000003424000 sr00-03 0000000000423000 0000000000000000 0000000000000000 0000000000423000 sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 IASQ: 0000000000000000 0000000000000000 IAOQ: 0000000040c78cf0 0000000040c78cf4 IIR: 539f00c0 ISR: 0000000000000000 IOR: 0000000000000060 CPU: 0 CR30: 00000000b8d50000 CR31: 00000000d22345e2 ORIG_R28: 0000000040250798 IAOQ[0]: parisc_kprobe_ss_handler+0x58/0x170 IAOQ[1]: parisc_kprobe_ss_handler+0x5c/0x170 RP(r2): parisc_kprobe_ss_handler+0x58/0x170 Backtrace: [<0000000040206ff8>] handle_interruption+0x178/0xbb8 Kernel panic - not syncing: Kernel Fault Avoid this panic by checking the return value of kprobe_running() and skip kprobe if none is currently active. Cc: <stable@vger.kernel.org> # v5.2 Acked-by: Sven Schnelle <svens@stackframe.org> Tested-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Helge Deller <deller@gmx.de>
2019-07-17parisc: Ensure userspace privilege for ptraced processes in regset functionsHelge Deller
On parisc the privilege level of a process is stored in the lowest two bits of the instruction pointers (IAOQ0 and IAOQ1). On Linux we use privilege level 0 for the kernel and privilege level 3 for user-space. So userspace should not be allowed to modify IAOQ0 or IAOQ1 of a ptraced process to change it's privilege level to e.g. 0 to try to gain kernel privileges. This patch prevents such modifications in the regset support functions by always setting the two lowest bits to one (which relates to privilege level 3 for user-space) if IAOQ0 or IAOQ1 are modified via ptrace regset calls. Link: https://bugs.gentoo.org/481768 Cc: <stable@vger.kernel.org> # v4.7+ Tested-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Helge Deller <deller@gmx.de>
2019-07-17parisc: Fix kernel panic due invalid values in IAOQ0 or IAOQ1Helge Deller
On parisc the privilege level of a process is stored in the lowest two bits of the instruction pointers (IAOQ0 and IAOQ1). On Linux we use privilege level 0 for the kernel and privilege level 3 for user-space. So userspace should not be allowed to modify IAOQ0 or IAOQ1 of a ptraced process to change it's privilege level to e.g. 0 to try to gain kernel privileges. This patch prevents such modifications by always setting the two lowest bits to one (which relates to privilege level 3 for user-space) if IAOQ0 or IAOQ1 are modified via ptrace calls in the native and compat ptrace paths. Link: https://bugs.gentoo.org/481768 Reported-by: Jeroen Roovers <jer@gentoo.org> Cc: <stable@vger.kernel.org> Tested-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Helge Deller <deller@gmx.de>
2019-07-17net_sched: unset TCQ_F_CAN_BYPASS when adding filtersCong Wang
For qdisc's that support TC filters and set TCQ_F_CAN_BYPASS, notably fq_codel, it makes no sense to let packets bypass the TC filters we setup in any scenario, otherwise our packets steering policy could not be enforced. This can be reproduced easily with the following script: ip li add dev dummy0 type dummy ifconfig dummy0 up tc qd add dev dummy0 root fq_codel tc filter add dev dummy0 parent 8001: protocol arp basic action mirred egress redirect dev lo tc filter add dev dummy0 parent 8001: protocol ip basic action mirred egress redirect dev lo ping -I dummy0 192.168.112.1 Without this patch, packets are sent directly to dummy0 without hitting any of the filters. With this patch, packets are redirected to loopback as expected. This fix is not perfect, it only unsets the flag but does not set it back because we have to save the information somewhere in the qdisc if we really want that. Note, both fq_codel and sfq clear this flag in their ->bind_tcf() but this is clearly not sufficient when we don't use any class ID. Fixes: 23624935e0c4 ("net_sched: TCQ_F_CAN_BYPASS generalization") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-17Merge tag 'platform-drivers-x86-v5.3-2' of ↵Linus Torvalds
git://git.infradead.org/linux-platform-drivers-x86 Pull another x86 platform driver update from Andy Shevchenko: "Provide better naming for ABI, i.e. tell that we have fan boost mode. It won't break any ABI, but has to be done now to avoid confusion in the future" * tag 'platform-drivers-x86-v5.3-2' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: asus: Rename "fan mode" to "fan boost mode"
2019-07-17Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - Convert thermal documents to ReST (Mauro Carvalho Chehab) - Fix a cyclic depedency in between thermal core and governors (Daniel Lezcano) - Fix processor_thermal_device driver to re-evaluate power limits after resume (Srinivas Pandruvada, Zhang Rui) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: drivers: thermal: processor_thermal_device: Fix build warning docs: thermal: convert to ReST thermal/drivers/core: Use governor table to initialize thermal/drivers/core: Add init section table for self-encapsulation drivers: thermal: processor_thermal: Read PPCC on resume
2019-07-17Merge tag 'gpio-v5.3-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: - Revert a SPIO GPIO fix that didn't fix anything but instead created new problems. - Remove the EM GPIO irqdomain in a safe manner. - Fix a memory leak in the gpio quirks. - Make the DaVinci error path silent on probe deferral. * tag 'gpio-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: Revert "gpio/spi: Fix spi-gpio regression on active high CS" gpio: em: remove the gpiochip before removing the irq domain gpiolib: of: fix a memory leak in of_gpio_flags_quirks() gpio: davinci: silence error prints in case of EPROBE_DEFER
generated by cgit (git 2.34.1) at 2025-07-16 00:33:05 +0000