summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-04arm64: dts: qcom: sm6375-pdx225: Add volume down GPIO keyKonrad Dybcio
Add the required nodes to enable the volume down key on the Sony Xperia 10 IV. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230303-topic-sm6375_features0_dts-v2-14-708b8191f7eb@linaro.org
2023-04-04arm64: dts: qcom: sm6375: Introduce C3 power state for both ARM clustersKonrad Dybcio
Introduce the C3 power state, which - to the best of my understanding - gates the CPU clock, but does not shut off the power rail. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230303-topic-sm6375_features0_dts-v2-13-708b8191f7eb@linaro.org
2023-04-04arm64: dts: qcom: sm6375: Bump CPU rail power collapse indexKonrad Dybcio
In preparation for supporting a less-deep sleep state, rename the existing rail power off from _0 to _1. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230303-topic-sm6375_features0_dts-v2-12-708b8191f7eb@linaro.org
2023-04-04arm64: dts: qcom: sm6375: Configure TSENS thermal zonesKonrad Dybcio
Add a thermal zones configuration for all 15+11 TSENS sensors. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230303-topic-sm6375_features0_dts-v2-11-708b8191f7eb@linaro.org
2023-04-04arm64: dts: qcom: sm6375: Add TSENSKonrad Dybcio
Add nodes for the two TSENS v2.8.0 controllers present on the SoC. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230303-topic-sm6375_features0_dts-v2-10-708b8191f7eb@linaro.org
2023-04-04arm64: dts: qcom: sm6375: Add CPUCP L3 nodeKonrad Dybcio
Configure the L3 cache DVFS scaler within the CPUCP block to allow for dynamic frequency switching. Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230303-topic-sm6375_features0_dts-v2-9-708b8191f7eb@linaro.org
2023-04-04arm64: dts: qcom: sm6375: Add modem nodesKonrad Dybcio
Add required nodes to make the embedded 5G modem boot up on SM6375. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230303-topic-sm6375_features0_dts-v2-8-708b8191f7eb@linaro.org
2023-04-04arm64: dts: qcom: sm6375: Add wifi nodeKonrad Dybcio
Add a node for ATH10K_SNoC wifi on SM6375. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230303-topic-sm6375_features0_dts-v2-7-708b8191f7eb@linaro.org
2023-04-04arm64: dts: qcom: sm6375: Add IMEMKonrad Dybcio
Add a node for the IMEM block on SM6375. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230303-topic-sm6375_features0_dts-v2-5-708b8191f7eb@linaro.org
2023-04-04arm64: dts: qcom: sm6375: Add RPM sleep statsKonrad Dybcio
Add a node for RPM sleep stats to enable sleep monitoring. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230303-topic-sm6375_features0_dts-v2-4-708b8191f7eb@linaro.org
2023-04-04arm64: dts: qcom: sm8550: Use the correct BWMON fallback compatibleKonrad Dybcio
Use the correct fallback compatible for the BWMONv4 with merged global and monitor register spaces. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230304-topic-ddr_bwmon-v3-7-77a050c2fbda@linaro.org
2023-04-04arm64: dts: qcom: sdm845: Use the correct BWMON compatibleKonrad Dybcio
Drop the incorrect msm8998 fallback and use the new qcom,sdm845-cpu-bwmon compatible to distinguish the CPU BWMON found on this platform. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230304-topic-ddr_bwmon-v3-6-77a050c2fbda@linaro.org
2023-04-04arm64: dts: qcom: sc8280xp: Use the correct BWMON fallback compatibleKonrad Dybcio
Use the correct fallback compatible for the BWMONv4 with merged global and monitor register spaces. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230304-topic-ddr_bwmon-v3-5-77a050c2fbda@linaro.org
2023-04-04arm64: dts: qcom: sc7280: Use the correct BWMON fallback compatibleKonrad Dybcio
Use the correct fallback compatible for the BWMONv4 with merged global and monitor register spaces. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230304-topic-ddr_bwmon-v3-4-77a050c2fbda@linaro.org
2023-04-04arm64: dts: qcom: sm6115: Add GPUCC and Adreno SMMUKonrad Dybcio
Add GPUCC and Adreno SMMU nodes in preparation for adding the GPU itself. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230315-topic-kamorta_adrsmmu-v1-2-d1c0dea90bd9@linaro.org
2023-04-04Merge branch '20230208091340.124641-1-konrad.dybcio@linaro.org' into HEADBjorn Andersson
Introduce SM6115 GPUCC devicetree bindings, to make it possible to use clock defines in the devicetree source.
2023-04-04arm64: dts: qcom: msm8998-yoshino: Use actual pin names for pin nodesKonrad Dybcio
With the gpio-line-names in place coming from SONY themselves, we can now make the pin nodes and their labels to more closely resemble the actual thing. 4k has been renamed to four_k due to dtc limitations. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230314-topic-yoshino_gpio-v2-2-4cb80e187e38@linaro.org
2023-04-04arm64: dts: qcom: msm8998-yoshino: Use SONY GPIO namesKonrad Dybcio
Sony ever so graciously provides GPIO line names in their downstream kernel (though sometimes they are not 100% accurate and you can judge that by simply looking at them and with what drivers they are used). Add these to the Yoshino devices DTs to better document the hardware. Lilac and Poplar have identical pin assignments. Diff between these two and maple: TLMM: - "NC", + "TS_VDDIO_EN", PMI8998: - "NC" + "USB_SWITCH_SEL" - "NC" + "4K_DISP_DCDC_EN" PM8005: - "NC" + "EAR_EN" Which is probably due to Maple being designed and released quite a bit earlier than the other two and it having a super high tech true-4K display. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230314-topic-yoshino_gpio-v2-1-4cb80e187e38@linaro.org
2023-04-04arm64: dts: qcom: sdm845-xiaomi-beryllium: add notification LEDJoel Selvaraj
The Poco F1 has a single color white notification LED. Enable the Qualcomm Light Pulse Generator (LPG) driver based notification LED. Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230313154226.136726-1-joelselvaraj.oss@gmail.com
2023-04-04arm64: dts: qcom: qdu1000: Add LLCC/system-cache-controllerKomal Bajaj
Add a DT node for Last level cache (aka. system cache) controller which provides control over the last level cache present on QDU1000 and QRU1000 SoCs. Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230313125731.17745-1-quic_kbajaj@quicinc.com
2023-04-04arm64: dts: qcom: apq8096-db820c: drop unit address from PMI8994 regulatorKrzysztof Kozlowski
The PMIC regulators are not supposed to have unit addresses. Fixes: 2317b87a2a6f ("arm64: dts: qcom: db820c: Add vdd_gfx and tie it into mmcc") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230312183622.460488-8-krzysztof.kozlowski@linaro.org
2023-04-04arm64: dts: qcom: msm8994-msft-lumia-octagon: drop unit address from PMI8994 ↵Krzysztof Kozlowski
regulator The PMIC regulators are not supposed to have unit addresses. Fixes: 60b214effb80 ("arm64: dts: qcom: msm8994-octagon: Configure regulators") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230312183622.460488-7-krzysztof.kozlowski@linaro.org
2023-04-04arm64: dts: qcom: msm8994-kitakami: drop unit address from PMI8994 regulatorKrzysztof Kozlowski
The PMIC regulators are not supposed to have unit addresses. Fixes: e9783584c9b7 ("arm64: dts: qcom: msm8994-kitakami: Add VDD_GFX regulator") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230312183622.460488-6-krzysztof.kozlowski@linaro.org
2023-04-04arm64: dts: qcom: msm8998-oneplus-cheeseburger: revert "fix backlight pin ↵Krzysztof Kozlowski
function" This reverts commit 46546f28825cf3a5ef6873b9cf947cd85c8a7258 because it mistakenly took PMIC pinctrl/GPIO as TLMM. The TLMM pinctrl uses "gpio" function, but PMIC uses "normal", so original code was correct: msm8998-oneplus-cheeseburger.dtb: pmic@2: gpio@c000:button-backlight-state: 'oneOf' conditional failed, one must be fixed: 'gpio' is not one of ['normal', 'paired', 'func1', 'func2', 'dtest1', 'dtest2', 'dtest3', 'dtest4', 'func3', 'func4'] Fixes: 46546f28825c ("arm64: dts: qcom: msm8998-oneplus-cheeseburger: fix backlight pin function") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230312183622.460488-5-krzysztof.kozlowski@linaro.org
2023-04-04arm64: dts: qcom: sc7180-trogdor-pazquel: correct trackpad supplyKrzysztof Kozlowski
The hid-over-i2c takes VDD, not VCC supply. Fix copy-pasta from other boards which use elan,ekth3000 with valid VCC: sc7180-trogdor-pazquel360-lte.dtb: trackpad@15: 'vcc-supply' does not match any of the regexes: 'pinctrl-[0-9]+' Fixes: fb69f6adaf88 ("arm64: dts: qcom: sc7180: Add pazquel dts files") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230312183622.460488-4-krzysztof.kozlowski@linaro.org
2023-04-04arm64: dts: qcom: sc7180-trogdor-lazor: correct trackpad supplyKrzysztof Kozlowski
The hid-over-i2c takes VDD, not VCC supply. Fix copy-pasta from other boards which use elan,ekth3000 with valid VCC: sc7180-trogdor-lazor-limozeen-nots-r4.dtb: trackpad@2c: 'vcc-supply' does not match any of the regexes: 'pinctrl-[0-9]+' Fixes: 2c26adb8dbab ("arm64: dts: qcom: Add sc7180-lazor-limozeen skus") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230312183622.460488-3-krzysztof.kozlowski@linaro.org
2023-04-04arm64: dts: qcom: sc7280-herobrine-villager: correct trackpad supplyKrzysztof Kozlowski
The hid-over-i2c takes VDD, not VCC supply. Fix copy-pasta from other Herobrine boards which use elan,ekth3000 with valid VCC: sc7280-herobrine-villager-r1-lte.dtb: trackpad@2c: 'vcc-supply' does not match any of the regexes: 'pinctrl-[0-9]+' Fixes: ee2a62116015 ("arm64: dts: qcom: sc7280: Add device tree for herobrine villager") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230312183622.460488-2-krzysztof.kozlowski@linaro.org
2023-04-04arm64: dts: qcom: sda660-inforce: correct key node nameKrzysztof Kozlowski
gpio-key bindings expect children to be named with generic prefix: sda660-inforce-ifc6560.dtb: gpio-keys: 'volup' does not match any of the regexes: ... Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230312183622.460488-1-krzysztof.kozlowski@linaro.org
2023-04-04arm64: dts: qcom: msm8916-yiming-uz801v3: Add initial device treeYang Xiwen
This commit adds support for the uz801 v3.0 WiFi/LTE dongle made by Henan Yiming Technology Co., Ltd. based on MSM8916. Note: The original firmware does not support 64-bit OS. It is necessary to flash 64-bit TZ firmware to boot arm64. Currently supported: - All CPU cores - Buttons - LEDs - Modem - SDHC - USB Device Mode - UART Signed-off-by: Yang Xiwen <forbidden405@foxmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/tencent_62395CA0D608DD0078DD3D889F6E4E22BA05@qq.com
2023-04-04arm64: dts: qcom: msm8916: Move WCN compatible to boardsStephan Gerhold
On MSM8916 the wireless connectivity functionality (WiFi/Bluetooth) is split into the digital part inside the SoC and the analog RF part inside a supplementary WCN36xx chip. For MSM8916, three different options exist: - WCN3620 (WLAN 802.11 b/g/n 2.4 GHz + Bluetooth) - WCN3660B (WLAN 802.11 a/b/g/n 2.4/5 GHz + Bluetooth) - WCN3680B (WLAN 802.11ac 2.4/5 GHz + Bluetooth) Choosing one of these is up to the board vendor. This means that the compatible belongs into the board-specific DT part so people porting new boards pay attention to set the correct compatible. Right now msm8916.dtsi sets "qcom,wcn3620" as default compatible, which does not work at all for boards that have WCN3660B or WCN3680B. Remove the default compatible from msm8196.dtsi and move it to the board DT as follows: - Boards with only &pronto { status = "okay"; } used the default "qcom,wcn3620" so far. They now set this explicitly for &wcnss_iris. - Boards with &pronto { ... iris { compatible = "qcom,wcn3660b"; }}; already had an override that just moves to &wcnss_iris now. - For msm8916-samsung-a2015-common.dtsi the WCN compatible differs for boards making use of it (a3u: wcn3620, a5u: wcn3660b, e2015: wcn3620) so the definitions move to the board-specific DT part. Since this requires touching all the board DTs, use this as a chance to name the WCNSS-related labels consistently, so everything is grouped properly when sorted alphabetically. No functional change, just clean-up for more clarity & easier porting. Aside from ordering the generated DTBs are identical. Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230309091452.1011776-1-stephan.gerhold@kernkonzept.com
2023-03-29pinctrl: qcom: Support OUTPUT_ENABLE; deprecate INPUT_ENABLEDouglas Anderson
The Qualcomm pinctrl driver has been violating the documented meaning of PIN_CONFIG_INPUT_ENABLE. That documentation says: Note that this does not affect the pin's ability to drive output. ...yet the Qualcomm driver's sole action when asked to "enable input" on a pin is to disable its output. The Qualcomm driver's implementation stems from the fact that "output-disable" is a "new" property from 2017. It was introduced in commit 425562429d4f ("pinctrl: generic: Add output-enable property"). The "input-enable" handling in Qualcomm drivers is from 2015 introduced in commit 407f5e392f9c ("pinctrl: qcom: handle input-enable pinconf property"). Let's change the Qualcomm driver to move us in the right direction. As part of this: 1. We'll now support PIN_CONFIG_OUTPUT_ENABLE 2. We'll still support using PIN_CONFIG_INPUT_ENABLE to disable a pin's output (in violation of the docs) with a big comment in the code. This is needed because old device trees have "input-enable" in them and, in some cases, people might need the old behavior. While we could programmatically change all old device trees, it doesn't really hurt to keep supporting the old behavior and we're _supposed_ to try to be compatible with old device trees anyway. It can also be noted that the PIN_CONFIG_INPUT_ENABLE handling code seems to have purposefully ignored its argument. That means that old boards that had _either_ "input-disable" or "input-enable" in them would have had the effect of disabling a pin's output. While we could change this behavior, since we're only leaving the PIN_CONFIG_INPUT_ENABLE there for backward compatibility we might as well be fully backward compatible. NOTE: despite the fact that we'll still support PIN_CONFIG_INPUT_ENABLE for _setting_ config, we take it away from msm_config_group_get(). This appears to be only used for populating debugfs and fixing debugfs to "output enabled" where relevant instead of "input enabled" makes more sense and has more truthiness. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230323102605.8.Id740ae6a993f9313b58add6b10f6a92795d510d4@changeid Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-03-29dt-bindings: pinctrl: qcom: Add output-enableDouglas Anderson
In the patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") we allowed setting "output-disable" for TLMM pinctrl states. Let's also add "output-enable". At first blush this seems a needless thing to do. Specifically: - In Linux (and presumably any other OSes using the same device trees) the GPIO/pinctrl driver knows to automatically enable the output when a GPIO is changed to an output. Thus in most cases specifying "output-enable" is superfluous and should be avoided. - If we need to set a pin's default state we already have "output-high" and "output-low" and these properties already imply "output-enabled" (at least on the Linux Qualcomm TLMM driver). However, there is one instance where "output-enable" seems like it could be useful: sleep states. It's not uncommon to want to configure pins as inputs (with appropriate pulls) when the driver controlling them is in a low power state. Then we want the pins back to outputs when the driver wants things running normally. To accomplish this we'd want to be able to use "output-enable". Then the "default" state could have "output-enable" and the "sleep" state could have "output-disable". NOTE: in all instances I'm aware of, we'd only want to use "output-enable" on pins that are configured as "gpio". The Qualcomm documentation that I have access to says that "output-enable" only does something useful when in GPIO mode. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230323102605.7.I7874c00092115c45377c2a06f7f133356956686e@changeid Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-03-29dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enableDouglas Anderson
As evidenced by the Qualcomm TLMM Linux driver, the TLMM IP block in Qualcomm SoCs has a bit to enable/disable the output for a pin that's configured as a GPIO but _not_ a bit to enable/disable an input buffer. Current device trees that are specifying "input-enable" for pins managed by TLMM are either doing so needlessly or are using it to mean "output-disable". Presumably the current convention of using "input-enable" to mean "output-disable" stems from the fact that "output-disable" is a "new" property from 2017. It was introduced in commit 425562429d4f ("pinctrl: generic: Add output-enable property"). The "input-enable" handling in Qualcomm drivers is from 2015 introduced in commit 407f5e392f9c ("pinctrl: qcom: handle input-enable pinconf property"). Given that there's no other use for "input-enable" for TLMM, we can still handle old device trees in code, but let's encourage people to move to the proper / documented property by updating the bindings. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230323102605.6.I291ce0ba2c6ea80b341659c4f75a567a76dd7ca6@changeid Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-03-28Merge branch 'arm64-fixes-for-6.3' into arm64-for-6.4Bjorn Andersson
Merge the arm64-fixes-for-6.3 branch to avoid merge conflicts with changes for v6.4.
2023-03-27arm64: dts: qcom: sdm845-xiaomi-beryllium: correct compatibleKrzysztof Kozlowski
Tianma FHD panel is supposed to be used with fallback compatible: sdm845-xiaomi-beryllium-tianma.dtb: panel@0: compatible: ['tianma,fhd-video'] is too short Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230326155753.92007-11-krzysztof.kozlowski@linaro.org
2023-03-27arm64: dts: qcom: sdm845-xiaomi-beryllium: drop invalid panel propertiesKrzysztof Kozlowski
Panel does not have children with unit-addresses thus address/size-cells are not valid: sdm845-xiaomi-beryllium-tianma.dtb: panel@0: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230326155753.92007-10-krzysztof.kozlowski@linaro.org
2023-03-27arm64: dts: qcom: sdm845-oneplus: drop invalid panel propertiesKrzysztof Kozlowski
Panel does not have children with unit-addresses thus address/size-cells are not valid: panel@0: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230326155753.92007-9-krzysztof.kozlowski@linaro.org
2023-03-27arm64: dts: qcom: sc7180-trogdor-lazor: correct panel compatibleKrzysztof Kozlowski
innolux,n116bca-ea1 is not exactly compatible witg innolux,n116bge, as they have their own driver data. Bindings do not allow fallback: sc7180-trogdor-lazor-limozeen-nots-r4.dtb: panel: compatible: ['innolux,n116bca-ea1', 'innolux,n116bge'] is too long Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230326155753.92007-8-krzysztof.kozlowski@linaro.org
2023-03-27arm64: dts: qcom: sc7180-qcard: use just "port" in panelKrzysztof Kozlowski
The panel bindings expect to have only one port, thus they do not allow to use "ports" node: sc7280-herobrine-zombie-nvme-lte.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230326155753.92007-7-krzysztof.kozlowski@linaro.org
2023-03-27arm64: dts: qcom: sc7180-trogdor-wormdingler: use just "port" in panelKrzysztof Kozlowski
The panel bindings expect to have only one port, thus they do not allow to use "ports" node: sc7180-trogdor-wormdingler-rev1-boe.dtb: panel@0: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230326155753.92007-6-krzysztof.kozlowski@linaro.org
2023-03-27arm64: dts: qcom: sc7180-trogdor-quackingstick: use just "port" in panelKrzysztof Kozlowski
The panel bindings expect to have only one port, thus they do not allow to use "ports" node: sc7180-trogdor-quackingstick-r0.dtb: panel@0: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230326155753.92007-5-krzysztof.kozlowski@linaro.org
2023-03-27arm64: dts: qcom: sc7180-idp: use just "port" in panelKrzysztof Kozlowski
The panel bindings expect to have only one port, thus they do not allow to use "ports" node: sc7180-idp.dtb: panel@0: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+' sc7180-idp.dtb: panel@0: 'port' is a required property Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230326155753.92007-4-krzysztof.kozlowski@linaro.org
2023-03-27arm64: dts: qcom: sc8280xp-crd: use just "port" in panelKrzysztof Kozlowski
The panel bindings expect to have only one port, thus they do not allow to use "ports" node: sc8280xp-crd.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230326155753.92007-3-krzysztof.kozlowski@linaro.org
2023-03-27arm64: dts: qcom: sc8280xp-lenovo-thinkpad-x13s: use just "port" in panelKrzysztof Kozlowski
The panel bindings expect to have only one port, thus they do not allow to use "ports" node: sc8280xp-lenovo-thinkpad-x13s.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230326155753.92007-2-krzysztof.kozlowski@linaro.org
2023-03-27arm64: dts: qcom: sdm845-cheza: use just "port" in Innolux panelKrzysztof Kozlowski
The panel bindings expect to have only one port, thus they do not allow to use "ports" node: sdm845-cheza-r2.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230326155753.92007-1-krzysztof.kozlowski@linaro.org
2023-03-27arm64: dts: qcom: sc8280xp-pmics: fix pon compatible and registersJohan Hovold
The pmk8280 PMIC PON peripheral is gen3 and uses two sets of registers; hlos and pbs. This specifically fixes the following error message during boot when the pbs registers are not defined: PON_PBS address missing, can't read HW debounce time Note that this also enables the spurious interrupt workaround introduced by commit 0b65118e6ba3 ("Input: pm8941-pwrkey - add software key press debouncing support") (which may or may not be needed). Fixes: ccd3517faf18 ("arm64: dts: qcom: sc8280xp: Add reference device") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Steev Klimaszewski <steev@kali.org> #Thinkpad X13s Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230327122948.4323-1-johan+linaro@kernel.org
2023-03-27arm64: dts: qcom: sc8280xp-x13s: drop bogus 'input-enable'Johan Hovold
The sc8280xp pin controller does not have a way to enable or disable the input buffer so drop the unnecessary 'input-enable' property which is about to be deprecated. Link: https://lore.kernel.org/lkml/20230323102605.6.I291ce0ba2c6ea80b341659c4f75a567a76dd7ca6@changeid Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230327123243.4527-1-johan+linaro@kernel.org
2023-03-24Merge branch '20230307062232.4889-1-quic_kathirav@quicinc.com' into ↵Bjorn Andersson
arm64-for-6.4 Merge in the topic branch with IPQ5332 GCC DT-binding, to ensure that the header file with GCC clock defines are available.
2023-03-24arm64: dts: qcom: sdm630: move DSI opp-table into DSI nodeKrzysztof Kozlowski
The soc node is supposed to have only device nodes with MMIO addresses, so move the DSI OPP into the DSI controller node to fix: sda660-inforce-ifc6560.dtb: soc: opp-table-dsi: {'compatible': ['operating-points-v2'], ... should not be valid under {'type': 'object'} From schema: dtschema/schemas/simple-bus.yaml Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230324202244.744271-5-krzysztof.kozlowski@linaro.org
2023-03-24arm64: dts: qcom: msm8996-xiaomi: drop simple-bus from clocksKrzysztof Kozlowski
'clocks' node is not a bus, but just a placeholder for clocks: msm8996-xiaomi-gemini.dtb: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' From schema: dtschema/schemas/simple-bus.yaml msm8996-xiaomi-gemini.dtb: clocks: xo-board: {'compatible': ['fixed-clock'], '#clock-cells': [[0]], ... From schema: dtschema/schemas/simple-bus.yaml Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230324202244.744271-4-krzysztof.kozlowski@linaro.org
generated by cgit (git 2.34.1) at 2025-07-15 18:07:45 +0000