| Age | Commit message (Collapse) | Author |
|---|
|
Whenever a shutdown is invoked, free irqs only and keep mlx5_irq
synthetic wrapper intact in order to avoid use-after-free on
system shutdown.
for example:
==================================================================
BUG: KASAN: use-after-free in _find_first_bit+0x66/0x80
Read of size 8 at addr ffff88823fc0d318 by task kworker/u192:0/13608
CPU: 25 PID: 13608 Comm: kworker/u192:0 Tainted: G B W O 6.1.21-cloudflare-kasan-2023.3.21 #1
Hardware name: GIGABYTE R162-R2-GEN0/MZ12-HD2-CD, BIOS R14 05/03/2021
Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core]
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x48
print_report+0x170/0x473
? _find_first_bit+0x66/0x80
kasan_report+0xad/0x130
? _find_first_bit+0x66/0x80
_find_first_bit+0x66/0x80
mlx5e_open_channels+0x3c5/0x3a10 [mlx5_core]
? console_unlock+0x2fa/0x430
? _raw_spin_lock_irqsave+0x8d/0xf0
? _raw_spin_unlock_irqrestore+0x42/0x80
? preempt_count_add+0x7d/0x150
? __wake_up_klogd.part.0+0x7d/0xc0
? vprintk_emit+0xfe/0x2c0
? mlx5e_trigger_napi_sched+0x40/0x40 [mlx5_core]
? dev_attr_show.cold+0x35/0x35
? devlink_health_do_dump.part.0+0x174/0x340
? devlink_health_report+0x504/0x810
? mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core]
? mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core]
? process_one_work+0x680/0x1050
mlx5e_safe_switch_params+0x156/0x220 [mlx5_core]
? mlx5e_switch_priv_channels+0x310/0x310 [mlx5_core]
? mlx5_eq_poll_irq_disabled+0xb6/0x100 [mlx5_core]
mlx5e_tx_reporter_timeout_recover+0x123/0x240 [mlx5_core]
? __mutex_unlock_slowpath.constprop.0+0x2b0/0x2b0
devlink_health_reporter_recover+0xa6/0x1f0
devlink_health_report+0x2f7/0x810
? vsnprintf+0x854/0x15e0
mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core]
? mlx5e_reporter_tx_err_cqe+0x1a0/0x1a0 [mlx5_core]
? mlx5e_tx_reporter_timeout_dump+0x50/0x50 [mlx5_core]
? mlx5e_tx_reporter_dump_sq+0x260/0x260 [mlx5_core]
? newidle_balance+0x9b7/0xe30
? psi_group_change+0x6a7/0xb80
? mutex_lock+0x96/0xf0
? __mutex_lock_slowpath+0x10/0x10
mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core]
process_one_work+0x680/0x1050
worker_thread+0x5a0/0xeb0
? process_one_work+0x1050/0x1050
kthread+0x2a2/0x340
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
</TASK>
Freed by task 1:
kasan_save_stack+0x23/0x50
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x40
____kasan_slab_free+0x169/0x1d0
slab_free_freelist_hook+0xd2/0x190
__kmem_cache_free+0x1a1/0x2f0
irq_pool_free+0x138/0x200 [mlx5_core]
mlx5_irq_table_destroy+0xf6/0x170 [mlx5_core]
mlx5_core_eq_free_irqs+0x74/0xf0 [mlx5_core]
shutdown+0x194/0x1aa [mlx5_core]
pci_device_shutdown+0x75/0x120
device_shutdown+0x35c/0x620
kernel_restart+0x60/0xa0
__do_sys_reboot+0x1cb/0x2c0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x4b/0xb5
The buggy address belongs to the object at ffff88823fc0d300
which belongs to the cache kmalloc-192 of size 192
The buggy address is located 24 bytes inside of
192-byte region [ffff88823fc0d300, ffff88823fc0d3c0)
The buggy address belongs to the physical page:
page:0000000010139587 refcount:1 mapcount:0 mapping:0000000000000000
index:0x0 pfn:0x23fc0c
head:0000000010139587 order:1 compound_mapcount:0 compound_pincount:0
flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff)
raw: 002ffff800010200 0000000000000000 dead000000000122 ffff88810004ca00
raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88823fc0d200: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88823fc0d280: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff88823fc0d300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88823fc0d380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff88823fc0d400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
general protection fault, probably for non-canonical address
0xdffffc005c40d7ac: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: probably user-memory-access in range [0x00000002e206bd60-0x00000002e206bd67]
CPU: 25 PID: 13608 Comm: kworker/u192:0 Tainted: G B W O 6.1.21-cloudflare-kasan-2023.3.21 #1
Hardware name: GIGABYTE R162-R2-GEN0/MZ12-HD2-CD, BIOS R14 05/03/2021
Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core]
RIP: 0010:__alloc_pages+0x141/0x5c0
Call Trace:
<TASK>
? sysvec_apic_timer_interrupt+0xa0/0xc0
? asm_sysvec_apic_timer_interrupt+0x16/0x20
? __alloc_pages_slowpath.constprop.0+0x1ec0/0x1ec0
? _raw_spin_unlock_irqrestore+0x3d/0x80
__kmalloc_large_node+0x80/0x120
? kvmalloc_node+0x4e/0x170
__kmalloc_node+0xd4/0x150
kvmalloc_node+0x4e/0x170
mlx5e_open_channels+0x631/0x3a10 [mlx5_core]
? console_unlock+0x2fa/0x430
? _raw_spin_lock_irqsave+0x8d/0xf0
? _raw_spin_unlock_irqrestore+0x42/0x80
? preempt_count_add+0x7d/0x150
? __wake_up_klogd.part.0+0x7d/0xc0
? vprintk_emit+0xfe/0x2c0
? mlx5e_trigger_napi_sched+0x40/0x40 [mlx5_core]
? dev_attr_show.cold+0x35/0x35
? devlink_health_do_dump.part.0+0x174/0x340
? devlink_health_report+0x504/0x810
? mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core]
? mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core]
? process_one_work+0x680/0x1050
mlx5e_safe_switch_params+0x156/0x220 [mlx5_core]
? mlx5e_switch_priv_channels+0x310/0x310 [mlx5_core]
? mlx5_eq_poll_irq_disabled+0xb6/0x100 [mlx5_core]
mlx5e_tx_reporter_timeout_recover+0x123/0x240 [mlx5_core]
? __mutex_unlock_slowpath.constprop.0+0x2b0/0x2b0
devlink_health_reporter_recover+0xa6/0x1f0
devlink_health_report+0x2f7/0x810
? vsnprintf+0x854/0x15e0
mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core]
? mlx5e_reporter_tx_err_cqe+0x1a0/0x1a0 [mlx5_core]
? mlx5e_tx_reporter_timeout_dump+0x50/0x50 [mlx5_core]
? mlx5e_tx_reporter_dump_sq+0x260/0x260 [mlx5_core]
? newidle_balance+0x9b7/0xe30
? psi_group_change+0x6a7/0xb80
? mutex_lock+0x96/0xf0
? __mutex_lock_slowpath+0x10/0x10
mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core]
process_one_work+0x680/0x1050
worker_thread+0x5a0/0xeb0
? process_one_work+0x1050/0x1050
kthread+0x2a2/0x340
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
</TASK>
---[ end trace 0000000000000000 ]---
RIP: 0010:__alloc_pages+0x141/0x5c0
Code: e0 39 a3 96 89 e9 b8 22 01 32 01 83 e1 0f 48 89 fa 01 c9 48 c1 ea
03 d3 f8 83 e0 03 89 44 24 6c 48 b8 00 00 00 00 00 fc ff df <80> 3c 02
00 0f 85 fc 03 00 00 89 e8 4a 8b 14 f5 e0 39 a3 96 4c 89
RSP: 0018:ffff888251f0f438 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 1ffff1104a3e1e8b RCX: 0000000000000000
RDX: 000000005c40d7ac RSI: 0000000000000003 RDI: 00000002e206bd60
RBP: 0000000000052dc0 R08: ffff8882b0044218 R09: ffff8882b0045e8a
R10: fffffbfff300fefc R11: ffff888167af4000 R12: 0000000000000003
R13: 0000000000000000 R14: 00000000696c7070 R15: ffff8882373f4380
FS: 0000000000000000(0000) GS:ffff88bf2be80000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005641d031eee8 CR3: 0000002e7ca14000 CR4: 0000000000350ee0
Kernel panic - not syncing: Fatal exception
Kernel Offset: 0x11000000 from 0xffffffff81000000 (relocation range:
0xffffffff80000000-0xffffffffbfffffff)
---[ end Kernel panic - not syncing: Fatal exception ]---]
Reported-by: Frederick Lawler <fred@cloudflare.com>
Link: https://lore.kernel.org/netdev/be5b9271-7507-19c5-ded1-fa78f1980e69@cloudflare.com
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
From one hand, mlx5 driver is allowing to probe PFs in parallel.
From the other hand, devcom, which is a share resource between PFs, is
registered without any lock. This might resulted in memory problems.
Hence, use the global mlx5_dev_list_lock in order to serialize devcom
registration.
Fixes: fadd59fc50d0 ("net/mlx5: Introduce inter-device communication mechanism")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In case devcom allocation is failed, mlx5 is always freeing the priv.
However, this priv might have been allocated by a different thread,
and freeing it might lead to use-after-free bugs.
Fix it by freeing the priv only in case it was allocated by the
running thread.
Fixes: fadd59fc50d0 ("net/mlx5: Introduce inter-device communication mechanism")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
devcom events are sent to all registered component. Following the
cited patch, it is possible for two components, e.g.: two eswitches,
to send devcom events, while both components are registered. This
means eswitch layer will do double un/pairing, which is double
allocation and free of resources, even though only one un/pairing is
needed. flow example:
cpu0 cpu1
---- ----
mlx5_devlink_eswitch_mode_set(dev0)
esw_offloads_devcom_init()
mlx5_devcom_register_component(esw0)
mlx5_devlink_eswitch_mode_set(dev1)
esw_offloads_devcom_init()
mlx5_devcom_register_component(esw1)
mlx5_devcom_send_event()
mlx5_devcom_send_event()
Hence, check whether the eswitches are already un/paired before
free/allocation of resources.
Fixes: 09b278462f16 ("net: devlink: enable parallel ops on netlink interface")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Cited patch is using the eswitch object mapping pool while
in nic mode where it isn't initialized. This results in the
trace below [0].
Fix that by using either nic or eswitch object mapping pool
depending if eswitch is enabled or not.
[0]:
[ 826.446057] ==================================================================
[ 826.446729] BUG: KASAN: slab-use-after-free in mlx5_add_flow_rules+0x30/0x490 [mlx5_core]
[ 826.447515] Read of size 8 at addr ffff888194485830 by task tc/6233
[ 826.448243] CPU: 16 PID: 6233 Comm: tc Tainted: G W 6.3.0-rc6+ #1
[ 826.448890] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 826.449785] Call Trace:
[ 826.450052] <TASK>
[ 826.450302] dump_stack_lvl+0x33/0x50
[ 826.450650] print_report+0xc2/0x610
[ 826.450998] ? __virt_addr_valid+0xb1/0x130
[ 826.451385] ? mlx5_add_flow_rules+0x30/0x490 [mlx5_core]
[ 826.451935] kasan_report+0xae/0xe0
[ 826.452276] ? mlx5_add_flow_rules+0x30/0x490 [mlx5_core]
[ 826.452829] mlx5_add_flow_rules+0x30/0x490 [mlx5_core]
[ 826.453368] ? __kmalloc_node+0x5a/0x120
[ 826.453733] esw_add_restore_rule+0x20f/0x270 [mlx5_core]
[ 826.454288] ? mlx5_eswitch_add_send_to_vport_meta_rule+0x260/0x260 [mlx5_core]
[ 826.455011] ? mutex_unlock+0x80/0xd0
[ 826.455361] ? __mutex_unlock_slowpath.constprop.0+0x210/0x210
[ 826.455862] ? mapping_add+0x2cb/0x440 [mlx5_core]
[ 826.456425] mlx5e_tc_action_miss_mapping_get+0x139/0x180 [mlx5_core]
[ 826.457058] ? mlx5e_tc_update_skb_nic+0xb0/0xb0 [mlx5_core]
[ 826.457636] ? __kasan_kmalloc+0x77/0x90
[ 826.458000] ? __kmalloc+0x57/0x120
[ 826.458336] mlx5_tc_ct_flow_offload+0x325/0xe40 [mlx5_core]
[ 826.458916] ? ct_kernel_enter.constprop.0+0x48/0xa0
[ 826.459360] ? mlx5_tc_ct_parse_action+0xf0/0xf0 [mlx5_core]
[ 826.459933] ? mlx5e_mod_hdr_attach+0x491/0x520 [mlx5_core]
[ 826.460507] ? mlx5e_mod_hdr_get+0x12/0x20 [mlx5_core]
[ 826.461046] ? mlx5e_tc_attach_mod_hdr+0x154/0x170 [mlx5_core]
[ 826.461635] mlx5e_configure_flower+0x969/0x2110 [mlx5_core]
[ 826.462217] ? _raw_spin_lock_bh+0x85/0xe0
[ 826.462597] ? __mlx5e_add_fdb_flow+0x750/0x750 [mlx5_core]
[ 826.463163] ? kasan_save_stack+0x2e/0x40
[ 826.463534] ? down_read+0x115/0x1b0
[ 826.463878] ? down_write_killable+0x110/0x110
[ 826.464288] ? tc_setup_action.part.0+0x9f/0x3b0
[ 826.464701] ? mlx5e_is_uplink_rep+0x4c/0x90 [mlx5_core]
[ 826.465253] ? mlx5e_tc_reoffload_flows_work+0x130/0x130 [mlx5_core]
[ 826.465878] tc_setup_cb_add+0x112/0x250
[ 826.466247] fl_hw_replace_filter+0x230/0x310 [cls_flower]
[ 826.466724] ? fl_hw_destroy_filter+0x1a0/0x1a0 [cls_flower]
[ 826.467212] fl_change+0x14e1/0x2030 [cls_flower]
[ 826.467636] ? sock_def_readable+0x89/0x120
[ 826.468019] ? fl_tmplt_create+0x2d0/0x2d0 [cls_flower]
[ 826.468509] ? kasan_unpoison+0x23/0x50
[ 826.468873] ? get_random_u16+0x180/0x180
[ 826.469244] ? __radix_tree_lookup+0x2b/0x130
[ 826.469640] ? fl_get+0x7b/0x140 [cls_flower]
[ 826.470042] ? fl_mask_put+0x200/0x200 [cls_flower]
[ 826.470478] ? __mutex_unlock_slowpath.constprop.0+0x210/0x210
[ 826.470973] ? fl_tmplt_create+0x2d0/0x2d0 [cls_flower]
[ 826.471427] tc_new_tfilter+0x644/0x1050
[ 826.471795] ? tc_get_tfilter+0x860/0x860
[ 826.472170] ? __thaw_task+0x130/0x130
[ 826.472525] ? arch_stack_walk+0x98/0xf0
[ 826.472892] ? cap_capable+0x9f/0xd0
[ 826.473235] ? security_capable+0x47/0x60
[ 826.473608] rtnetlink_rcv_msg+0x1d5/0x550
[ 826.473985] ? rtnl_calcit.isra.0+0x1f0/0x1f0
[ 826.474383] ? __stack_depot_save+0x35/0x4c0
[ 826.474779] ? kasan_save_stack+0x2e/0x40
[ 826.475149] ? kasan_save_stack+0x1e/0x40
[ 826.475518] ? __kasan_record_aux_stack+0x9f/0xb0
[ 826.475939] ? task_work_add+0x77/0x1c0
[ 826.476305] netlink_rcv_skb+0xe0/0x210
[ 826.476661] ? rtnl_calcit.isra.0+0x1f0/0x1f0
[ 826.477057] ? netlink_ack+0x7c0/0x7c0
[ 826.477412] ? rhashtable_jhash2+0xef/0x150
[ 826.477796] ? _copy_from_iter+0x105/0x770
[ 826.484386] netlink_unicast+0x346/0x490
[ 826.484755] ? netlink_attachskb+0x400/0x400
[ 826.485145] ? kernel_text_address+0xc2/0xd0
[ 826.485535] netlink_sendmsg+0x3b0/0x6c0
[ 826.485902] ? kernel_text_address+0xc2/0xd0
[ 826.486296] ? netlink_unicast+0x490/0x490
[ 826.486671] ? iovec_from_user.part.0+0x7a/0x1a0
[ 826.487083] ? netlink_unicast+0x490/0x490
[ 826.487461] sock_sendmsg+0x73/0xc0
[ 826.487803] ____sys_sendmsg+0x364/0x380
[ 826.488186] ? import_iovec+0x7/0x10
[ 826.488531] ? kernel_sendmsg+0x30/0x30
[ 826.488893] ? __copy_msghdr+0x180/0x180
[ 826.489258] ? kasan_save_stack+0x2e/0x40
[ 826.489629] ? kasan_save_stack+0x1e/0x40
[ 826.490002] ? __kasan_record_aux_stack+0x9f/0xb0
[ 826.490424] ? __call_rcu_common.constprop.0+0x46/0x580
[ 826.490876] ___sys_sendmsg+0xdf/0x140
[ 826.491231] ? copy_msghdr_from_user+0x110/0x110
[ 826.491649] ? fget_raw+0x120/0x120
[ 826.491988] ? ___sys_recvmsg+0xd9/0x130
[ 826.492355] ? folio_batch_add_and_move+0x80/0xa0
[ 826.492776] ? _raw_spin_lock+0x7a/0xd0
[ 826.493137] ? _raw_spin_lock+0x7a/0xd0
[ 826.493500] ? _raw_read_lock_irq+0x30/0x30
[ 826.493880] ? kasan_set_track+0x21/0x30
[ 826.494249] ? kasan_save_free_info+0x2a/0x40
[ 826.494650] ? do_sys_openat2+0xff/0x270
[ 826.495016] ? __fget_light+0x1b5/0x200
[ 826.495377] ? __virt_addr_valid+0xb1/0x130
[ 826.495763] __sys_sendmsg+0xb2/0x130
[ 826.496118] ? __sys_sendmsg_sock+0x20/0x20
[ 826.496501] ? __x64_sys_rseq+0x2e0/0x2e0
[ 826.496874] ? do_user_addr_fault+0x276/0x820
[ 826.497273] ? fpregs_assert_state_consistent+0x52/0x60
[ 826.497727] ? exit_to_user_mode_prepare+0x30/0x120
[ 826.498158] do_syscall_64+0x3d/0x90
[ 826.498502] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 826.498949] RIP: 0033:0x7f9b67f4f887
[ 826.499294] Code: 0a 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
[ 826.500742] RSP: 002b:00007fff5d1a5498 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 826.501395] RAX: ffffffffffffffda RBX: 0000000064413ce6 RCX: 00007f9b67f4f887
[ 826.501975] RDX: 0000000000000000 RSI: 00007fff5d1a5500 RDI: 0000000000000003
[ 826.502556] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001
[ 826.503135] R10: 00007f9b67e08708 R11: 0000000000000246 R12: 0000000000000001
[ 826.503714] R13: 0000000000000001 R14: 00007fff5d1a9800 R15: 0000000000485400
[ 826.504304] </TASK>
[ 826.504753] Allocated by task 3764:
[ 826.505090] kasan_save_stack+0x1e/0x40
[ 826.505453] kasan_set_track+0x21/0x30
[ 826.505810] __kasan_kmalloc+0x77/0x90
[ 826.506164] __mlx5_create_flow_table+0x16d/0xbb0 [mlx5_core]
[ 826.506742] esw_offloads_enable+0x60d/0xfb0 [mlx5_core]
[ 826.507292] mlx5_eswitch_enable_locked+0x4d3/0x680 [mlx5_core]
[ 826.507885] mlx5_devlink_eswitch_mode_set+0x2a3/0x580 [mlx5_core]
[ 826.508513] devlink_nl_cmd_eswitch_set_doit+0xdf/0x1f0
[ 826.508969] genl_family_rcv_msg_doit.isra.0+0x146/0x1c0
[ 826.509427] genl_rcv_msg+0x28d/0x3e0
[ 826.509772] netlink_rcv_skb+0xe0/0x210
[ 826.510133] genl_rcv+0x24/0x40
[ 826.510448] netlink_unicast+0x346/0x490
[ 826.510810] netlink_sendmsg+0x3b0/0x6c0
[ 826.511179] sock_sendmsg+0x73/0xc0
[ 826.511519] __sys_sendto+0x18d/0x220
[ 826.511867] __x64_sys_sendto+0x72/0x80
[ 826.512232] do_syscall_64+0x3d/0x90
[ 826.512576] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 826.513220] Freed by task 5674:
[ 826.513535] kasan_save_stack+0x1e/0x40
[ 826.513893] kasan_set_track+0x21/0x30
[ 826.514245] kasan_save_free_info+0x2a/0x40
[ 826.514629] ____kasan_slab_free+0x11a/0x1b0
[ 826.515021] __kmem_cache_free+0x14d/0x280
[ 826.515399] tree_put_node+0x109/0x1c0 [mlx5_core]
[ 826.515907] mlx5_destroy_flow_table+0x119/0x630 [mlx5_core]
[ 826.516481] esw_offloads_steering_cleanup+0xe7/0x150 [mlx5_core]
[ 826.517084] esw_offloads_disable+0xe0/0x160 [mlx5_core]
[ 826.517632] mlx5_eswitch_disable_locked+0x26c/0x290 [mlx5_core]
[ 826.518225] mlx5_devlink_eswitch_mode_set+0x128/0x580 [mlx5_core]
[ 826.518834] devlink_nl_cmd_eswitch_set_doit+0xdf/0x1f0
[ 826.519286] genl_family_rcv_msg_doit.isra.0+0x146/0x1c0
[ 826.519748] genl_rcv_msg+0x28d/0x3e0
[ 826.520101] netlink_rcv_skb+0xe0/0x210
[ 826.520458] genl_rcv+0x24/0x40
[ 826.520771] netlink_unicast+0x346/0x490
[ 826.521137] netlink_sendmsg+0x3b0/0x6c0
[ 826.521505] sock_sendmsg+0x73/0xc0
[ 826.521842] __sys_sendto+0x18d/0x220
[ 826.522191] __x64_sys_sendto+0x72/0x80
[ 826.522554] do_syscall_64+0x3d/0x90
[ 826.522894] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 826.523540] Last potentially related work creation:
[ 826.523969] kasan_save_stack+0x1e/0x40
[ 826.524331] __kasan_record_aux_stack+0x9f/0xb0
[ 826.524739] insert_work+0x30/0x130
[ 826.525078] __queue_work+0x34b/0x690
[ 826.525426] queue_work_on+0x48/0x50
[ 826.525766] __rhashtable_remove_fast_one+0x4af/0x4d0 [mlx5_core]
[ 826.526365] del_sw_flow_group+0x1b5/0x270 [mlx5_core]
[ 826.526898] tree_put_node+0x109/0x1c0 [mlx5_core]
[ 826.527407] esw_offloads_steering_cleanup+0xd3/0x150 [mlx5_core]
[ 826.528009] esw_offloads_disable+0xe0/0x160 [mlx5_core]
[ 826.528616] mlx5_eswitch_disable_locked+0x26c/0x290 [mlx5_core]
[ 826.529218] mlx5_devlink_eswitch_mode_set+0x128/0x580 [mlx5_core]
[ 826.529823] devlink_nl_cmd_eswitch_set_doit+0xdf/0x1f0
[ 826.530276] genl_family_rcv_msg_doit.isra.0+0x146/0x1c0
[ 826.530733] genl_rcv_msg+0x28d/0x3e0
[ 826.531079] netlink_rcv_skb+0xe0/0x210
[ 826.531439] genl_rcv+0x24/0x40
[ 826.531755] netlink_unicast+0x346/0x490
[ 826.532123] netlink_sendmsg+0x3b0/0x6c0
[ 826.532487] sock_sendmsg+0x73/0xc0
[ 826.532825] __sys_sendto+0x18d/0x220
[ 826.533175] __x64_sys_sendto+0x72/0x80
[ 826.533533] do_syscall_64+0x3d/0x90
[ 826.533877] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 826.534521] The buggy address belongs to the object at ffff888194485800
which belongs to the cache kmalloc-512 of size 512
[ 826.535506] The buggy address is located 48 bytes inside of
freed 512-byte region [ffff888194485800, ffff888194485a00)
[ 826.536666] The buggy address belongs to the physical page:
[ 826.537138] page:00000000d75841dd refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x194480
[ 826.537915] head:00000000d75841dd order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 826.538595] flags: 0x200000000010200(slab|head|node=0|zone=2)
[ 826.539089] raw: 0200000000010200 ffff888100042c80 ffffea0004523800 dead000000000002
[ 826.539755] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
[ 826.540417] page dumped because: kasan: bad access detected
[ 826.541095] Memory state around the buggy address:
[ 826.541519] ffff888194485700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 826.542149] ffff888194485780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 826.542773] >ffff888194485800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 826.543400] ^
[ 826.543822] ffff888194485880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 826.544452] ffff888194485900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 826.545079] ==================================================================
Fixes: 6702782845a5 ("net/mlx5e: TC, Set CT miss to the specific ct action instance")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Check in the mlx5e_ptp_poll_ts_cq context if the ptp tx sq should be woken
up. Before change, the ptp tx sq may never wake up if the ptp tx ts skb
fifo is full when mlx5e_poll_tx_cq checks if the queue should be woken up.
Fixes: 1880bc4e4a96 ("net/mlx5e: Add TX port timestamp support")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Cited commit causes ABBA deadlock[0] when peer flows are created while
holding the devcom rw semaphore. Due to peer flows offload implementation
the lock is taken much higher up the call chain and there is no obvious way
to easily fix the deadlock. Instead, since tc route query code needs the
peer eswitch structure only to perform a lookup in xarray and doesn't
perform any sleeping operations with it, refactor the code for lockless
execution in following ways:
- RCUify the devcom 'data' pointer. When resetting the pointer
synchronously wait for RCU grace period before returning. This is fine
since devcom is currently only used for synchronization of
pairing/unpairing of eswitches which is rare and already expensive as-is.
- Wrap all usages of 'paired' boolean in {READ|WRITE}_ONCE(). The flag has
already been used in some unlocked contexts without proper
annotations (e.g. users of mlx5_devcom_is_paired() function), but it wasn't
an issue since all relevant code paths checked it again after obtaining the
devcom semaphore. Now it is also used by mlx5_devcom_get_peer_data_rcu() as
"best effort" check to return NULL when devcom is being unpaired. Note that
while RCU read lock doesn't prevent the unpaired flag from being changed
concurrently it still guarantees that reader can continue to use 'data'.
- Refactor mlx5e_tc_query_route_vport() function to use new
mlx5_devcom_get_peer_data_rcu() API which fixes the deadlock.
[0]:
[ 164.599612] ======================================================
[ 164.600142] WARNING: possible circular locking dependency detected
[ 164.600667] 6.3.0-rc3+ #1 Not tainted
[ 164.601021] ------------------------------------------------------
[ 164.601557] handler1/3456 is trying to acquire lock:
[ 164.601998] ffff88811f1714b0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}, at: mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[ 164.603078]
but task is already holding lock:
[ 164.603617] ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core]
[ 164.604459]
which lock already depends on the new lock.
[ 164.605190]
the existing dependency chain (in reverse order) is:
[ 164.605848]
-> #1 (&comp->sem){++++}-{3:3}:
[ 164.606380] down_read+0x39/0x50
[ 164.606772] mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core]
[ 164.607336] mlx5e_tc_query_route_vport+0x86/0xc0 [mlx5_core]
[ 164.607914] mlx5e_tc_tun_route_lookup+0x1a4/0x1d0 [mlx5_core]
[ 164.608495] mlx5e_attach_decap_route+0xc6/0x1e0 [mlx5_core]
[ 164.609063] mlx5e_tc_add_fdb_flow+0x1ea/0x360 [mlx5_core]
[ 164.609627] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core]
[ 164.610175] mlx5e_configure_flower+0x952/0x1a20 [mlx5_core]
[ 164.610741] tc_setup_cb_add+0xd4/0x200
[ 164.611146] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower]
[ 164.611661] fl_change+0xc95/0x18a0 [cls_flower]
[ 164.612116] tc_new_tfilter+0x3fc/0xd20
[ 164.612516] rtnetlink_rcv_msg+0x418/0x5b0
[ 164.612936] netlink_rcv_skb+0x54/0x100
[ 164.613339] netlink_unicast+0x190/0x250
[ 164.613746] netlink_sendmsg+0x245/0x4a0
[ 164.614150] sock_sendmsg+0x38/0x60
[ 164.614522] ____sys_sendmsg+0x1d0/0x1e0
[ 164.614934] ___sys_sendmsg+0x80/0xc0
[ 164.615320] __sys_sendmsg+0x51/0x90
[ 164.615701] do_syscall_64+0x3d/0x90
[ 164.616083] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 164.616568]
-> #0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}:
[ 164.617210] __lock_acquire+0x159e/0x26e0
[ 164.617638] lock_acquire+0xc2/0x2a0
[ 164.618018] __mutex_lock+0x92/0xcd0
[ 164.618401] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[ 164.618943] post_process_attr+0x153/0x2d0 [mlx5_core]
[ 164.619471] mlx5e_tc_add_fdb_flow+0x164/0x360 [mlx5_core]
[ 164.620021] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core]
[ 164.620564] mlx5e_configure_flower+0xe33/0x1a20 [mlx5_core]
[ 164.621125] tc_setup_cb_add+0xd4/0x200
[ 164.621531] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower]
[ 164.622047] fl_change+0xc95/0x18a0 [cls_flower]
[ 164.622500] tc_new_tfilter+0x3fc/0xd20
[ 164.622906] rtnetlink_rcv_msg+0x418/0x5b0
[ 164.623324] netlink_rcv_skb+0x54/0x100
[ 164.623727] netlink_unicast+0x190/0x250
[ 164.624138] netlink_sendmsg+0x245/0x4a0
[ 164.624544] sock_sendmsg+0x38/0x60
[ 164.624919] ____sys_sendmsg+0x1d0/0x1e0
[ 164.625340] ___sys_sendmsg+0x80/0xc0
[ 164.625731] __sys_sendmsg+0x51/0x90
[ 164.626117] do_syscall_64+0x3d/0x90
[ 164.626502] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 164.626995]
other info that might help us debug this:
[ 164.627725] Possible unsafe locking scenario:
[ 164.628268] CPU0 CPU1
[ 164.628683] ---- ----
[ 164.629098] lock(&comp->sem);
[ 164.629421] lock(&esw->offloads.encap_tbl_lock);
[ 164.630066] lock(&comp->sem);
[ 164.630555] lock(&esw->offloads.encap_tbl_lock);
[ 164.630993]
*** DEADLOCK ***
[ 164.631575] 3 locks held by handler1/3456:
[ 164.631962] #0: ffff888124b75130 (&block->cb_lock){++++}-{3:3}, at: tc_setup_cb_add+0x5b/0x200
[ 164.632703] #1: ffff888116e512b8 (&esw->mode_lock){++++}-{3:3}, at: mlx5_esw_hold+0x39/0x50 [mlx5_core]
[ 164.633552] #2: ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core]
[ 164.634435]
stack backtrace:
[ 164.634883] CPU: 17 PID: 3456 Comm: handler1 Not tainted 6.3.0-rc3+ #1
[ 164.635431] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 164.636340] Call Trace:
[ 164.636616] <TASK>
[ 164.636863] dump_stack_lvl+0x47/0x70
[ 164.637217] check_noncircular+0xfe/0x110
[ 164.637601] __lock_acquire+0x159e/0x26e0
[ 164.637977] ? mlx5_cmd_set_fte+0x5b0/0x830 [mlx5_core]
[ 164.638472] lock_acquire+0xc2/0x2a0
[ 164.638828] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[ 164.639339] ? lock_is_held_type+0x98/0x110
[ 164.639728] __mutex_lock+0x92/0xcd0
[ 164.640074] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[ 164.640576] ? __lock_acquire+0x382/0x26e0
[ 164.640958] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[ 164.641468] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[ 164.641965] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[ 164.642454] ? lock_release+0xbf/0x240
[ 164.642819] post_process_attr+0x153/0x2d0 [mlx5_core]
[ 164.643318] mlx5e_tc_add_fdb_flow+0x164/0x360 [mlx5_core]
[ 164.643835] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core]
[ 164.644340] mlx5e_configure_flower+0xe33/0x1a20 [mlx5_core]
[ 164.644862] ? lock_acquire+0xc2/0x2a0
[ 164.645219] tc_setup_cb_add+0xd4/0x200
[ 164.645588] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower]
[ 164.646067] fl_change+0xc95/0x18a0 [cls_flower]
[ 164.646488] tc_new_tfilter+0x3fc/0xd20
[ 164.646861] ? tc_del_tfilter+0x810/0x810
[ 164.647236] rtnetlink_rcv_msg+0x418/0x5b0
[ 164.647621] ? rtnl_setlink+0x160/0x160
[ 164.647982] netlink_rcv_skb+0x54/0x100
[ 164.648348] netlink_unicast+0x190/0x250
[ 164.648722] netlink_sendmsg+0x245/0x4a0
[ 164.649090] sock_sendmsg+0x38/0x60
[ 164.649434] ____sys_sendmsg+0x1d0/0x1e0
[ 164.649804] ? copy_msghdr_from_user+0x6d/0xa0
[ 164.650213] ___sys_sendmsg+0x80/0xc0
[ 164.650563] ? lock_acquire+0xc2/0x2a0
[ 164.650926] ? lock_acquire+0xc2/0x2a0
[ 164.651286] ? __fget_files+0x5/0x190
[ 164.651644] ? find_held_lock+0x2b/0x80
[ 164.652006] ? __fget_files+0xb9/0x190
[ 164.652365] ? lock_release+0xbf/0x240
[ 164.652723] ? __fget_files+0xd3/0x190
[ 164.653079] __sys_sendmsg+0x51/0x90
[ 164.653435] do_syscall_64+0x3d/0x90
[ 164.653784] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 164.654229] RIP: 0033:0x7f378054f8bd
[ 164.654577] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 6a c3 f4 ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 be c3 f4 ff 48
[ 164.656041] RSP: 002b:00007f377fa114b0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e
[ 164.656701] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f378054f8bd
[ 164.657297] RDX: 0000000000000000 RSI: 00007f377fa11540 RDI: 0000000000000014
[ 164.657885] RBP: 00007f377fa12278 R08: 0000000000000000 R09: 000000000000015c
[ 164.658472] R10: 00007f377fa123d0 R11: 0000000000000293 R12: 0000560962d99bd0
[ 164.665317] R13: 0000000000000000 R14: 0000560962d99bd0 R15: 00007f377fa11540
Fixes: f9d196bd632b ("net/mlx5e: Use correct eswitch for stack devices with lag")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Fix spacing for the error and also the correct error code pointer.
Fixes: c9b9dcb430b3 ("net/mlx5: Move device memory management to mlx5_core")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
With introduction of post action infrastructure most of the users of encap
attribute had been modified in order to obtain the correct attribute by
calling mlx5e_tc_get_encap_attr() helper instead of assuming encap action
is always on default attribute. However, the cited commit didn't modify
mlx5e_invalidate_encap() which prevents it from destroying correct modify
header action which leads to a warning [0]. Fix the issue by using correct
attribute.
[0]:
Feb 21 09:47:35 c-237-177-40-045 kernel: WARNING: CPU: 17 PID: 654 at drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:684 mlx5e_tc_attach_mod_hdr+0x1cc/0x230 [mlx5_core]
Feb 21 09:47:35 c-237-177-40-045 kernel: RIP: 0010:mlx5e_tc_attach_mod_hdr+0x1cc/0x230 [mlx5_core]
Feb 21 09:47:35 c-237-177-40-045 kernel: Call Trace:
Feb 21 09:47:35 c-237-177-40-045 kernel: <TASK>
Feb 21 09:47:35 c-237-177-40-045 kernel: mlx5e_tc_fib_event_work+0x8e3/0x1f60 [mlx5_core]
Feb 21 09:47:35 c-237-177-40-045 kernel: ? mlx5e_take_all_encap_flows+0xe0/0xe0 [mlx5_core]
Feb 21 09:47:35 c-237-177-40-045 kernel: ? lock_downgrade+0x6d0/0x6d0
Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x273/0x3f0
Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x273/0x3f0
Feb 21 09:47:35 c-237-177-40-045 kernel: process_one_work+0x7c2/0x1310
Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x3f0/0x3f0
Feb 21 09:47:35 c-237-177-40-045 kernel: ? pwq_dec_nr_in_flight+0x230/0x230
Feb 21 09:47:35 c-237-177-40-045 kernel: ? rwlock_bug.part.0+0x90/0x90
Feb 21 09:47:35 c-237-177-40-045 kernel: worker_thread+0x59d/0xec0
Feb 21 09:47:35 c-237-177-40-045 kernel: ? __kthread_parkme+0xd9/0x1d0
Fixes: 8300f225268b ("net/mlx5e: Create new flow attr for multi table actions")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
SW Steering uses RC QP for writing STEs to ICM. This writingis done in LB
(loopback), and FL (force-loopback) QP is preferred for performance. FL is
available when RoCE is enabled or disabled based on RoCE caps.
This patch adds reading of FL capability from HCA caps in addition to the
existing reading from RoCE caps, thus fixing the case where we didn't
have loopback enabled when RoCE was disabled.
Fixes: 7304d603a57a ("net/mlx5: DR, Add support for force-loopback QP")
Signed-off-by: Itamar Gozlan <igozlan@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When calculating crc for hash index we use the function crc32 that
calculates for little-endian (LE) arch.
Then we convert it to network endianness using htonl(), but it's wrong
to do the conversion in BE archs since the crc32 value is already LE.
The solution is to switch the bytes from the crc result for all types
of arc.
Fixes: 40416d8ede65 ("net/mlx5: DR, Replace CRC32 implementation to use kernel lib")
Signed-off-by: Erez Shitrit <erezsh@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In case user switch a device from switchdev mode to legacy mode, mlx5
first unpair the E-switch and afterwards unload the uplink vport.
From the other hand, in case user remove or reload a device, mlx5
first unload the uplink vport and afterwards unpair the E-switch.
The latter is causing a bug[1], hence, handle pairing of E-switch as
part of uplink un/load APIs.
[1]
In case VF_LAG is used, every tc fdb flow is duplicated to the peer
esw. However, the original esw keeps a pointer to this duplicated
flow, not the peer esw.
e.g.: if user create tc fdb flow over esw0, the flow is duplicated
over esw1, in FW/HW, but in SW, esw0 keeps a pointer to the duplicated
flow.
During module unload while a peer tc fdb flow is still offloaded, in
case the first device to be removed is the peer device (esw1 in the
example above), the peer net-dev is destroyed, and so the mlx5e_priv
is memset to 0.
Afterwards, the peer device is trying to unpair himself from the
original device (esw0 in the example above). Unpair API invoke the
original device to clear peer flow from its eswitch (esw0), but the
peer flow, which is stored over the original eswitch (esw0), is
trying to use the peer mlx5e_priv, which is memset to 0 and result in
bellow kernel-oops.
[ 157.964081 ] BUG: unable to handle page fault for address: 000000000002ce60
[ 157.964662 ] #PF: supervisor read access in kernel mode
[ 157.965123 ] #PF: error_code(0x0000) - not-present page
[ 157.965582 ] PGD 0 P4D 0
[ 157.965866 ] Oops: 0000 [#1] SMP
[ 157.967670 ] RIP: 0010:mlx5e_tc_del_fdb_flow+0x48/0x460 [mlx5_core]
[ 157.976164 ] Call Trace:
[ 157.976437 ] <TASK>
[ 157.976690 ] __mlx5e_tc_del_fdb_peer_flow+0xe6/0x100 [mlx5_core]
[ 157.977230 ] mlx5e_tc_clean_fdb_peer_flows+0x67/0x90 [mlx5_core]
[ 157.977767 ] mlx5_esw_offloads_unpair+0x2d/0x1e0 [mlx5_core]
[ 157.984653 ] mlx5_esw_offloads_devcom_event+0xbf/0x130 [mlx5_core]
[ 157.985212 ] mlx5_devcom_send_event+0xa3/0xb0 [mlx5_core]
[ 157.985714 ] esw_offloads_disable+0x5a/0x110 [mlx5_core]
[ 157.986209 ] mlx5_eswitch_disable_locked+0x152/0x170 [mlx5_core]
[ 157.986757 ] mlx5_eswitch_disable+0x51/0x80 [mlx5_core]
[ 157.987248 ] mlx5_unload+0x2a/0xb0 [mlx5_core]
[ 157.987678 ] mlx5_uninit_one+0x5f/0xd0 [mlx5_core]
[ 157.988127 ] remove_one+0x64/0xe0 [mlx5_core]
[ 157.988549 ] pci_device_remove+0x31/0xa0
[ 157.988933 ] device_release_driver_internal+0x18f/0x1f0
[ 157.989402 ] driver_detach+0x3f/0x80
[ 157.989754 ] bus_remove_driver+0x70/0xf0
[ 157.990129 ] pci_unregister_driver+0x34/0x90
[ 157.990537 ] mlx5_cleanup+0xc/0x1c [mlx5_core]
[ 157.990972 ] __x64_sys_delete_module+0x15a/0x250
[ 157.991398 ] ? exit_to_user_mode_prepare+0xea/0x110
[ 157.991840 ] do_syscall_64+0x3d/0x90
[ 157.992198 ] entry_SYSCALL_64_after_hwframe+0x46/0xb0
Fixes: 04de7dda7394 ("net/mlx5e: Infrastructure for duplicated offloading of TC flows")
Fixes: 1418ddd96afd ("net/mlx5e: Duplicate offloaded TC eswitch rules under uplink LAG")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
DEVX can issue a general command, which is not used by mlx5 driver.
In case such command is failed, mlx5 is trying to collect the failure
data, However, mlx5 doesn't create a storage for this command, since
mlx5 doesn't use it. This lead to array-index-out-of-bounds error.
Fix it by checking whether the command is known before collecting the
failure data.
Fixes: 34f46ae0d4b3 ("net/mlx5: Add command failures data to debugfs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
sock->file = sock_alloc_file(sock, O_NONBLOCK, NULL);
^^^^ ^^^^
sock_alloc_file() calls release_sock() on error but the left hand
side of the assignment dereferences "sock". This isn't the bug and
I didn't report this earlier because there is an assert that it
doesn't fail.
net/handshake/handshake-test.c:221 handshake_req_submit_test4() error: dereferencing freed memory 'sock'
net/handshake/handshake-test.c:233 handshake_req_submit_test4() warn: 'req' was already freed.
net/handshake/handshake-test.c:254 handshake_req_submit_test5() error: dereferencing freed memory 'sock'
net/handshake/handshake-test.c:290 handshake_req_submit_test6() error: dereferencing freed memory 'sock'
net/handshake/handshake-test.c:321 handshake_req_cancel_test1() error: dereferencing freed memory 'sock'
net/handshake/handshake-test.c:355 handshake_req_cancel_test2() error: dereferencing freed memory 'sock'
net/handshake/handshake-test.c:367 handshake_req_cancel_test2() warn: 'req' was already freed.
net/handshake/handshake-test.c:395 handshake_req_cancel_test3() error: dereferencing freed memory 'sock'
net/handshake/handshake-test.c:407 handshake_req_cancel_test3() warn: 'req' was already freed.
net/handshake/handshake-test.c:451 handshake_req_destroy_test1() error: dereferencing freed memory 'sock'
net/handshake/handshake-test.c:463 handshake_req_destroy_test1() warn: 'req' was already freed.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 88232ec1ec5e ("net/handshake: Add Kunit tests for the handshake consumer API")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/168451609436.45209.15407022385441542980.stgit@oracle-102.nfsv4bat.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "handshake_req_alloc excessive privsize" kunit test is intended
to check what happens when the maximum privsize is exceeded. The
WARN_ON_ONCE_GFP at mm/page_alloc.c:4744 can be disabled safely for
this test.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Fixes: 88232ec1ec5e ("net/handshake: Add Kunit tests for the handshake consumer API")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/168451636052.47152.9600443326570457947.stgit@oracle-102.nfsv4bat.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Should tc589_config() fail, some resources need to be released as already
done in the remove function.
Fixes: 15b99ac17295 ("[PATCH] pcmcia: add return value to _config() functions")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/d8593ae867b24c79063646e36f9b18b0790107cb.1684575975.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If an error occures after calling nv_mgmt_acquire_sema(), it should be
undone with a corresponding nv_mgmt_release_sema() call.
Add it in the error handling path of the probe as already done in the
remove function.
Fixes: cac1c52c3621 ("forcedeth: mgmt unit interface")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Link: https://lore.kernel.org/r/355e9a7d351b32ad897251b6f81b5886fcdc6766.1684571393.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Dave Hansen:
"This works around and issue where the INVLPG instruction may miss
invalidating kernel TLB entries in recent hybrid CPUs.
I do expect an eventual microcode fix for this. When the microcode
version numbers are known, we can circle back around and add them the
model table to disable this workaround"
* tag 'x86_urgent_for_6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Avoid incomplete Global INVLPG flushes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module fix from Luis Chamberlain:
"Only one fix has trickled through. Harshit Mogalapalli found a
use-after-free bug through static analysis with smatch"
* tag 'modules-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: Fix use-after-free bug in read_file_mod_stats()
|
|
Smatch warns:
kernel/module/stats.c:394 read_file_mod_stats()
warn: passing freed memory 'buf'
We are passing 'buf' to simple_read_from_buffer() after freeing it.
Fix this by changing the order of 'simple_read_from_buffer' and 'kfree'.
Fixes: df3e764d8e5c ("module: add debug stats to help identify memory pressure")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Pull NFS client fixes from Anna Schumaker:
"Stable Fix:
- Don't change task->tk_status after the call to rpc_exit_task
Other Bugfixes:
- Convert kmap_atomic() to kmap_local_folio()
- Fix a potential double free with READ_PLUS"
* tag 'nfs-for-6.4-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFSv4.2: Fix a potential double free with READ_PLUS
SUNRPC: Don't change task->tk_status after the call to rpc_exit_task
NFS: Convert kmap_atomic() to kmap_local_folio()
|
|
The LRU and LRU_PERCPU maps allocate a new element on update before locking the
target hash table bucket. Right after that the maps try to lock the bucket.
If this fails, then maps return -EBUSY to the caller without releasing the
allocated element. This makes the element untracked: it doesn't belong to
either of free lists, and it doesn't belong to the hash table, so can't be
re-used; this eventually leads to the permanent -ENOMEM on LRU map updates,
which is unexpected. Fix this by returning the element to the local free list
if bucket locking fails.
Fixes: 20b6cc34ea74 ("bpf: Avoid hashtab deadlock with map_locked")
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Link: https://lore.kernel.org/r/20230522154558.2166815-1-aspsk@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Flush caches after changing gatt entries and calculate entry according
to SBA requirements.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Add comment in arch_sync_dma_for_device() and handle the direction flag in
arch_sync_dma_for_cpu().
When receiving data from the device (DMA_FROM_DEVICE) unconditionally
purge the data cache in arch_sync_dma_for_cpu().
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:
Series of fixes for issues found during development and testing,
primarly for avs driver.
|
|
For a bigjoiner configuration display->crtc_disable() will be called
first for the slave CRTCs and then for the master CRTC. However slave
CRTCs will be actually disabled only after the master CRTC is disabled
(from the encoder disable hooks called with the master CRTC state).
Hence the slave PIPEDMCs can be disabled only after the master CRTC is
disabled, make this so.
intel_encoders_post_pll_disable() must be called only for the master
CRTC, as for the other two encoder disable hooks. While at it fix this
up as well. This didn't cause a problem, since
intel_encoders_post_pll_disable() will call the corresponding hook only
for an encoder/connector connected to the given CRTC, however slave
CRTCs will have no associated encoder/connector.
Fixes: 3af2ff0840be ("drm/i915: Enable a PIPEDMC whenever its corresponding pipe is enabled")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230510103131.1618266-2-imre.deak@intel.com
(cherry picked from commit 7eeef32719f6af935a1554813e6bc206446339cd)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
syzbot is reporting a lockdep warning in fill_pool() because the allocation
from debugobjects is using GFP_ATOMIC, which is (__GFP_HIGH | __GFP_KSWAPD_RECLAIM)
and therefore tries to wake up kswapd, which acquires kswapd_wait::lock.
Since fill_pool() might be called with arbitrary locks held, fill_pool()
should not assume that acquiring kswapd_wait::lock is safe.
Use __GFP_HIGH instead and remove __GFP_NORETRY as it is pointless for
!__GFP_DIRECT_RECLAIM allocation.
Fixes: 3ac7fe5a4aab ("infrastructure to debug (dynamic) objects")
Reported-by: syzbot <syzbot+fe0c72f0ccbb93786380@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/6577e1fa-b6ee-f2be-2414-a2b51b1c5e30@I-love.SAKURA.ne.jp
Closes: https://syzkaller.appspot.com/bug?extid=fe0c72f0ccbb93786380
|
|
It's reported that the recording started right after the driver probe
doesn't work properly, and it turned out that this is related with the
codec auto-suspend. Namely, after the probe phase, the usage count
goes zero, and the auto-suspend is programmed, but the codec is kept
still active until the auto-suspend expiration. When an application
(e.g. alsactl) updates the mixer values at this moment, the values are
cached but not actually written. Then, starting arecord thereafter
also results in the silence because of the missing unmute.
The root cause is the handling of "lazy update" mode; when a mixer
value is updated *after* the suspend, it should update only the cache
and exits. At the resume, the cached value is written to the device,
in turn. The problem is that the current code misinterprets the state
of auto-suspend as if it were already suspended.
Although we can add the check of the actual device state after
pm_runtime_get_if_in_use() for catching the missing state, this won't
suffice; the second call of regmap_update_bits_check() will skip
writing the register because the cache has been already updated by the
first call. So we'd need fixes in two different places.
OTOH, a simpler fix is to replace pm_runtime_get_if_in_use() with
pm_runtime_get_if_active() (with ign_usage_count=true). This change
implies that the driver takes the pm refcount if the device is still
in ACTIVE state and continues the processing. A small caveat is that
this will leave the auto-suspend timer. But, since the timer callback
itself checks the device state and aborts gracefully when it's active,
this won't be any substantial problem.
Long story short: we address the missing register-write problem just
by replacing the pm_runtime_*() call in snd_hda_keep_power_up().
Fixes: fc4f000bf8c0 ("ALSA: hda - Fix unexpected resume through regmap code path")
Reported-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Closes: https://lore.kernel.org/r/a7478636-af11-92ab-731c-9b13c582a70d@linux.intel.com
Suggested-by: Cezary Rojewski <cezary.rojewski@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230518113520.15213-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
On 68030/020, an instruction such as, moveml %a2-%a3/%a5,%sp@- may cause
a stack page fault during instruction execution (i.e. not at an
instruction boundary) and produce a format 0xB exception frame.
In this situation, the value of USP will be unreliable. If a signal is
to be delivered following the exception, this USP value is used to
calculate the location for a signal frame. This can result in a
corrupted user stack.
The corruption was detected in dash (actually in glibc) where it showed
up as an intermittent "stack smashing detected" message and crash
following signal delivery for SIGCHLD.
It was hard to reproduce that failure because delivery of the signal
raced with the page fault and because the kernel places an unpredictable
gap of up to 7 bytes between the USP and the signal frame.
A format 0xB exception frame can be produced by a bus error or an
address error. The 68030 Users Manual says that address errors occur
immediately upon detection during instruction prefetch. The instruction
pipeline allows prefetch to overlap with other instructions, which means
an address error can arise during the execution of a different
instruction. So it seems likely that this patch may help in the address
error case also.
Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Link: https://lore.kernel.org/all/CAMuHMdW3yD22_ApemzW_6me3adq6A458u1_F0v-1EYwK_62jPA@mail.gmail.com/
Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: stable@vger.kernel.org
Co-developed-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/9e66262a754fcba50208aa424188896cc52a1dd1.1683365892.git.fthain@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
When working in slave mode it seems the timing is exceedingly tight.
The TX FIFO can never empty, because the master is driving the clock so
zeros would be sent for those bytes where the FIFO is empty.
Return to interleaving the writing of the TX FIFO and the reading
of the RX FIFO to try to ensure the data is available when required.
Fixes: a84c11e16dc2 ("spi: spi-cadence: Avoid read of RX FIFO before its ready")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230518093927.711358-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In mutex_init() lockdep identifies a lock by defining a special static
key for each lock class. However if we wrap the macro in a function,
like in drmm_mutex_init(), we end up generating:
int drmm_mutex_init(struct drm_device *dev, struct mutex *lock)
{
static struct lock_class_key __key;
__mutex_init((lock), "lock", &__key);
....
}
The static __key here is what lockdep uses to identify the lock class,
however since this is just a normal function the key here will be
created once, where all callers then use the same key. In effect the
mutex->depmap.key will be the same pointer for different
drmm_mutex_init() callers. This then results in impossible lockdep
splats since lockdep thinks completely unrelated locks are the same lock
class.
To fix this turn drmm_mutex_init() into a macro such that it generates a
different "static struct lock_class_key __key" for each invocation,
which looks to be inline with what mutex_init() wants.
v2:
- Revamp the commit message with clearer explanation of the issue.
- Rather export __drmm_mutex_release() than static inline.
Reported-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reported-by: Sarah Walker <sarah.walker@imgtec.com>
Fixes: e13f13e039dc ("drm: Add DRM-managed mutex_init()")
Cc: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230519090733.489019-1-matthew.auld@intel.com
|
|
The term "-supply" is a suffix to regulator names.
Signed-off-by: David Epping <david.epping@missinglinkelectronics.com>
Link: https://lore.kernel.org/r/20230519110545.GA18663@nucnuc.mle
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Constraint functions have return values, they should be checked for
potential errors.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-8-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
All IPCs using instance_id use 8 bit value. Original commit used 16 bit
value because FW reports possible max value in 16 bit field, but in
practice FW limits the value to 8 bits.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-7-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Configurations with multiple codecs attached to the platform are
supported but only if each from the set is different. Add new field
representing the 'Unique ID' so that codecs that share Vendor and Part
IDs can be differentiated and thus enabling support for such
configurations.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-6-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Constant 'C4_CHANNEL' does not exist on the firmware side. Value 0xC is
reserved for 'C7_1' instead.
Fixes: 580a5912d1fe ("ASoC: Intel: avs: Declare module configuration types")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Constant 'C4_CHANNEL' does not exist on the firmware side. Value 0xC is
reserved for 'C7_1' instead.
Fixes: 04afbbbb1cba ("ASoC: Intel: Skylake: Update the topology interface structure")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Path and its components should be accessed under lock to prevent
problems with one thread modifying them while other tries to read.
Fixes: c8c960c10971 ("ASoC: Intel: avs: APL-based platforms support")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When changing value of kcontrol, FW module to which data should be send
needs to be found. Currently it is done in improper way, fix it. Change
function name to indicate that it looks only for volume module.
This allows to change volume during runtime, instead of only changing
init value.
Fixes: be2b81b519d7 ("ASoC: Intel: avs: Parse control tuples")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When doing plpmtu probe, the probe size is growing every time when it
receives the ACK during the Search state until the probe fails. When
the failure occurs, pl.probe_high is set and it goes to the Complete
state.
However, if the link pmtu is huge, like 65535 in loopback_dev, the probe
eventually keeps using SCTP_MAX_PLPMTU as the probe size and never fails.
Because of that, pl.probe_high can not be set, and the plpmtu probe can
never go to the Complete state.
Fix it by setting pl.probe_high to SCTP_MAX_PLPMTU when the probe size
grows to SCTP_MAX_PLPMTU in sctp_transport_pl_recv(). Also, not allow
the probe size greater than SCTP_MAX_PLPMTU in the Complete state.
Fixes: b87641aff9e7 ("sctp: do state transition when a probe succeeds on HB ACK recv path")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This quirk is necessary for surround and other DSP effects to work
with the onboard ca0132 based audio chipset for the EVGA X299 dark
mainboard.
Signed-off-by: Adam Stylinski <kungfujesus06@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=67071
Link: https://lore.kernel.org/r/ZGopOe19T1QOwizS@eggsbenedict.adamsnet
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- MIPS GIC fixes for issues that could result in either
loss of state in the interrupt controller, or a deadlock
- Workaround for Mediatek Chromebooks that only save/restore
partial state when turning the GIC redistributors off,
resulting if fireworks if Linux uses interrupt priorities
for pseudo-NMIs
- Fix the MBIGEN error handling on init
- Mark meson-gpio OF data structures as __maybe_unused,
avoiding compilation warnings on non-OF setups
Link: https://lore.kernel.org/lkml/20230521101812.2520740-1-maz@kernel.org
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML fix from Richard Weinberger:
- Fix modular build for UML watchdog
* tag 'uml-for-linus-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: harddog: fix modular build
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Plug a race in the stage-2 mapping code where the IPA and the PA
would end up being out of sync
- Make better use of the bitmap API (bitmap_zero, bitmap_zalloc...)
- FP/SVE/SME documentation update, in the hope that this field
becomes clearer...
- Add workaround for Apple SEIS brokenness to a new SoC
- Random comment fixes
x86:
- add MSR_IA32_TSX_CTRL into msrs_to_save
- fixes for XCR0 handling in SGX enclaves
Generic:
- Fix vcpu_array[0] races
- Fix race between starting a VM and 'reboot -f'"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: add MSR_IA32_TSX_CTRL into msrs_to_save
KVM: x86: Don't adjust guest's CPUID.0x12.1 (allowed SGX enclave XFRM)
KVM: VMX: Don't rely _only_ on CPUID to enforce XCR0 restrictions for ECREATE
KVM: Fix vcpu_array[0] races
KVM: VMX: Fix header file dependency of asm/vmx.h
KVM: Don't enable hardware after a restart/shutdown is initiated
KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown
KVM: arm64: vgic: Add Apple M2 PRO/MAX cpus to the list of broken SEIS implementations
KVM: arm64: Clarify host SME state management
KVM: arm64: Restructure check for SVE support in FP trap handler
KVM: arm64: Document check for TIF_FOREIGN_FPSTATE
KVM: arm64: Fix repeated words in comments
KVM: arm64: Constify start/end/phys fields of the pgtable walker data
KVM: arm64: Infer PA offset from VA in hyp map walker
KVM: arm64: Infer the PA offset from IPA in stage-2 map walker
KVM: arm64: Use the bitmap API to allocate bitmaps
KVM: arm64: Slightly optimize flush_context()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fail graciously if BUILD_BPF_SKEL=1 is specified and clang isn't
available
- Add empty 'struct rq' to 'perf lock contention' to satisfy libbpf
'runqueue' type verification. This feature is built only with
BUILD_BPF_SKEL=1
- Make vmlinux.h use bpf.h and perf_event.h in source directory, not
system ones that may be old and not have things like 'union
perf_sample_weight'
- Add system include paths to BPF builds to pick things missing in the
headers included by clang -target bpf
- Update various header copies with the kernel sources
- Change divide by zero and not supported events behavior to show
'nan'/'not counted' in 'perf stat' output.
This happens when using things like 'perf stat -M TopdownL2 true',
involving JSON metrics
- Update no event/metric expectations affected by using JSON metrics in
'perf stat -ddd' perf test
- Avoid segv with 'perf stat --topdown' for metrics without a group
- Do not assume which events may have a PMU name, allowing the logic to
keep an AUX event group together. Makes this usecase work again:
$ perf record --no-bpf-event -c 10 -e '{intel_pt//,tlb_flush.stlb_any/aux-sample-size=8192/pp}:u' -- sleep 0.1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.078 MB perf.data ]
$ perf script -F-dso,+addr | grep -C5 tlb_flush.stlb_any | head -11
sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cc82a2 dl_main+0x9a2 => 7f5350cb38f0 _dl_add_to_namespace_list+0x0
sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cb3908 _dl_add_to_namespace_list+0x18 => 7f5350cbb080 rtld_mutex_dummy+0x0
sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cc8350 dl_main+0xa50 => 0 [unknown]
sleep 20444 [003] 7939.510244: 1 branches:uH: 7f5350cc83ca dl_main+0xaca => 7f5350caeb60 _dl_process_pt_gnu_property+0x0
sleep 20444 [003] 7939.510245: 1 branches:uH: 7f5350caeb60 _dl_process_pt_gnu_property+0x0 => 0 [unknown]
sleep 20444 7939.510245: 10 tlb_flush.stlb_any/aux-sample-size=8192/pp: 0 7f5350caeb60 _dl_process_pt_gnu_property+0x0
sleep 20444 [003] 7939.510254: 1 branches:uH: 7f5350cc87fe dl_main+0xefe => 7f5350ccd240 strcmp+0x0
sleep 20444 [003] 7939.510254: 1 branches:uH: 7f5350cc8862 dl_main+0xf62 => 0 [unknown]
- Add a check for the above use case in 'perf test test_intel_pt'
- Fix build with refcount checking on arm64, it was still accessing
fields that need to be wrapped so that the refcounted struct gets
checked
- Fix contextid validation in ARM's CS-ETM, so that older kernels
without that field can still be supported
- Skip unsupported aggregation for stat events found in perf.data files
in 'perf script'
- Add stat test for record and script to check the previous problem
- Remove needless debuginfod queries from 'perf test java symbol', this
was just making the test take a long time to complete
- Address python SafeConfigParser() deprecation warning in 'perf test
attr'
- Fix __NR_execve undeclared on i386 'perf bench syscall' build error
* tag 'perf-tools-fixes-for-v6.4-1-2023-05-20' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (33 commits)
perf bench syscall: Fix __NR_execve undeclared build error
perf test attr: Fix python SafeConfigParser() deprecation warning
perf test attr: Update no event/metric expectations
tools headers disabled-features: Sync with the kernel sources
tools headers UAPI: Sync arch prctl headers with the kernel sources
tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
tools headers x86 cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync s390 syscall table file that wires up the memfd_secret syscall
tools headers UAPI: Sync linux/prctl.h with the kernel sources
perf metrics: Avoid segv with --topdown for metrics without a group
perf lock contention: Add empty 'struct rq' to satisfy libbpf 'runqueue' type verification
perf cs-etm: Fix contextid validation
perf arm64: Fix build with refcount checking
perf test: Add stat test for record and script
perf script: Skip aggregation for stat events
perf build: Add system include paths to BPF builds
perf bpf skels: Make vmlinux.h use bpf.h and perf_event.h in source directory
perf parse-events: Do not break up AUX event group
perf test test_intel_pt.sh: Test sample mode with event with PMU name
perf evsel: Modify group pmu name for software events
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix broken soft dirty tracking when using the Radix MMU (>= P9)
- Fix ISA mapping when "ranges" property is not present, for PASemi
Nemo boards
- Fix a possible WARN_ON_ONCE hitting in BPF extable handling
- Fix incorrect DMA address handling when using 2MB TCEs
- Fix a bug in IOMMU table handling for SR-IOV devices
- Fix the recent rework of IOMMU handling which left arch code calling
clean up routines that are handled by the IOMMU core
- A few assorted build fixes
Thanks to Christian Zigotzky, Dan Horák, Gaurav Batra, Hari Bathini,
Jason Gunthorpe, Nathan Chancellor, Naveen N. Rao, Nicholas Piggin, Pali
Rohár, Randy Dunlap, and Rob Herring.
* tag 'powerpc-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/iommu: Incorrect DDW Table is referenced for SR-IOV device
powerpc/iommu: DMA address offset is incorrectly calculated with 2MB TCEs
powerpc/iommu: Remove iommu_del_device()
powerpc/crypto: Fix aes-gcm-p10 build when VSX=n
powerpc/bpf: populate extable entries only during the last pass
powerpc/boot: Disable power10 features after BOOTAFLAGS assignment
powerpc/64s/radix: Fix soft dirty tracking
powerpc/fsl_uli1575: fix kconfig warnings and build errors
powerpc/isa-bridge: Fix ISA mapping when "ranges" is not present
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fix from Damien Le Moal:
- Fix DT binding for the ahci-ceva driver to fully describe all iommus,
from Michal
* tag 'ata-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
dt-bindings: ata: ahci-ceva: Cover all 4 iommus entries
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
"A few small unspectacular fbdev fixes:
- Fix for USB endpoint check in udlfb (found by syzbot fuzzer)
- Small fix in error code path in omapfb
- compiler warning fixes in fbmem & i810
- code removal and whitespace cleanups in stifb and atyfb"
* tag 'fbdev-for-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: stifb: Whitespace cleanups
fbdev: udlfb: Use usb_control_msg_send()
fbdev: udlfb: Fix endpoint check
fbdev: atyfb: Remove unused clock determination
fbdev: i810: include i810_main.h in i810_dvt.c
fbdev: fbmem: mark get_fb_unmapped_area() static
fbdev: omapfb: panel-tpo-td043mtea1: fix error code in probe()
|
|
Pull ksmbd server fixes from Steve French:
- two fixes for incorrect SMB3 message validation (one for client which
uses 8 byte padding, and one for empty bcc)
- two fixes for out of bounds bugs: one for username offset checks (in
session setup) and the other for create context name length checks in
open requests
* tag '6.4-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: smb2: Allow messages padded to 8byte boundary
ksmbd: allocate one more byte for implied bcc[0]
ksmbd: fix wrong UserName check in session_user
ksmbd: fix global-out-of-bounds in smb2_find_context_vals
|
