summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-11-15brcmsmac: remove unnecessary returnEduardo Abinader
Signed-off-by: Eduardo Abinader <eduardoabinader@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v5.5. Major changes: ath10k * request for PM_QOS_CPU_DMA_LATENCY to improve firmware initialisation time
2019-11-15iwlwifi: mvm: fix non-ACPI functionJohannes Berg
The code now compiles without ACPI, but there's a warning since iwl_mvm_get_ppag_table() isn't used, and iwl_mvm_ppag_init() must not unconditionally fail but return success instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: 22000: fix some indentationJohannes Berg
Somehow two tabs snuck into this file where just one should be used, fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: remove IWL_DEVICE_22560/IWL_DEVICE_FAMILY_22560Johannes Berg
This is dead code, nothing uses the IWL_DEVICE_22560 macro and thus nothing every uses IWL_DEVICE_FAMILY_22560. Remove it all. While at it, remove some code and definitions used only in this case, and clean up some comments/names that still refer to it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: sync the iwl_mvm_session_prot_notif layoutEmmanuel Grumbach
The firmware API has changed a little bit but this change has no impact on the flow and is backward compatible. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: start CTDP budget from 2400mAMordechay Goodstein
The current budget of 2000mA is preventing us from reaching maximum throughput. According to our system engineers, we can increase the maximum budget to 2400mA to solve this problem. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: don't skip mgmt tid when flushing all tidsHaim Dreyfuss
There are various of flows which require tids flushing (disconnection, suspend, etc...). Currently, when the driver instructs the FW to flush he masks all the data tids(0-7). However, the driver doesn't set the management tid (#15) which cause the FW not to flush it. When the FW tries to remove the mgmt queue he throws an assert since it is not an empty queue. instead of just set only the data tids set everything and let the FW ignore the invalid tids. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: scan: enable adaptive dwell in p2pShahar S Matityahu
Align to the requirement update and support adaptive dwell in p2p scan. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: refactor the SAR tables from mvm to acpiIhab Zhaika
Refactored the SAR related functions from iwlmvm to acpi in order to make it shared between different opmodes in addition to removing unused variable ppag_rev. Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: scan: support scan req cmd ver 12Shahar S Matityahu
Implement scan request command version 12. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: scan: make new scan req versioning flowShahar S Matityahu
Implement a new versioning handling flow supported from version 11 onwards. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: fix unaligned read of rx_pkt_statusWang Xuerui
This is present since the introduction of iwlmvm. Example stack trace on MIPS: [<ffffffffc0789328>] iwl_mvm_rx_rx_mpdu+0xa8/0xb88 [iwlmvm] [<ffffffffc0632b40>] iwl_pcie_rx_handle+0x420/0xc48 [iwlwifi] Tested with a Wireless AC 7265 for ~6 months, confirmed to fix the problem. No other unaligned accesses are spotted yet. Signed-off-by: Wang Xuerui <wangxuerui@qiniu.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: remove redundant assignment to variable bufszColin Ian King
The variable bufsz is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: bump FW API to 51 for 22000 seriesLuca Coelho
Start supporting API version 51 for 22000 series. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: FW API: reference enum in docs of modify_maskJohannes Berg
Add a reference to the correct enum rather than showing the pattern of the actual constants. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: print rate_n_flags in a pretty formatMordechay Goodstein
Use the rs_pretty_print_rate() function to print the rate_n_flags in more human-readable format. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: scan: adapt the code to use api ver 11Tova Mussai
FW scan api ver 11 adds support for some new features, in this version the fw did also some cleanup in the api, which causes the driver not to be able to use the current scan req struct. Therefore, in this patch the driver has new version for the scan command code Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: scan: Create function to build scan cmdTova Mussai
Currently, the code to build scan cmd is duplicated in iwl_mvm_reg_scan_start and iwl_mvm_sched_scan_start. Create a function to build this command, and call the function instead. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: scan: create function for scan scheduling paramsTova Mussai
In the next patch, this code will be used from different places. As preparation export this code into function. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: dbg_ini: support dump collection upon assert during D3Shahar S Matityahu
add assert time point in the D3 resume flow in case there was an assert during D3. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: pcie: make iwl_pcie_gen2_update_byte_tbl staticEmmanuel Grumbach
It is called within tx-gen2.c only. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: in VHT connection use only VHT capabilitiesMordechay Goodstein
mac80211 limits amsdu size to the minimum of HT and VHT capabilities but since in a VHT connection we don't transmit HT frames we can discard HT limits. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: nvm: update iwl_uhb_nvm_channelsTova Mussai
Change the UHB channels to start from 1 to match the specs (11ax Draft 5.0). Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: remove else-if in iwl_send_phy_cfg_cmd()Luca Coelho
We return in the if block, so it's unnecessary to have an else statement. Remove it. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: fix support for single antenna diversityLuca Coelho
When the single antenna diversity support was sent upstream, only some definitions were sent, due to a bad revert. Fix this by adding the actual code. Fixes: 5952e0ec3f05 ("iwlwifi: mvm: add support for single antenna diversity") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15wcn36xx: fix typoEduardo Abinader
Signed-off-by: Eduardo Abinader <eduardoabinader@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15ath10k: qmi: Sleep for a while before assigning MSA memoryBjorn Andersson
Unless we sleep for a while before transitioning the MSA memory to WLAN the MPSS.AT.4.0.c2-01184-SDM845_GEN_PACK-1 firmware triggers a security violation fairly reliably. Unforutnately recovering from this failure always results in the entire system freezing. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15ath10k: Revert "ath10k: add cleanup in ath10k_sta_state()"Bjorn Andersson
This reverts commit 334f5b61a6f29834e881923b98d1e27e5ce9620d. This caused ath10k_snoc on Qualcomm MSM8998, SDM845 and QCS404 platforms to trigger an assert in the firmware: err_qdi.c:456:EF:wlan_process:1:cmnos_thread.c:3900:Asserted in wlan_vdev.c:_wlan_vdev_up:3219 Revert the offending commit for now. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14qtnfmac: add support for getting/setting transmit powerMikhail Karpenko
Add new command for getting/setting current transmit power and propagate requests from user space to firmware. Signed-off-by: Mikhail Karpenko <mkarpenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14qtnfmac: handle MIC failure event from firmwareSergey Matyukevich
Report MIC failure from firmware to cfg80211 subsystem using dedicated callback cfg80211_michael_mic_failure. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14qtnfmac: send EAPOL frames via control pathSergey Matyukevich
Send EAPOL frames via control path so they can be treated in a different way rather than normal data frames. In this case EAPOLs are sent with higher priority and with disabled aggregation and encryption. Besides, all devices benefit from sending EAPOL frames via high priority path, so move the functionality from chip specific to common code. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14qtnfmac: modify Rx descriptors queue setupSergey Matyukevich
Rx descriptors queue length is hardware specific. Current common default value is no more than an accident. So move Rx descriptor queue setup to platform PCIe backend in the same way as it is already done for Tx. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14qtnfmac: fix invalid channel information outputSergey Matyukevich
Do not attempt to print frequency for an invalid channel provided by firmware. That channel may simply not exist. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14qtnfmac: fix debugfs support for multiple cardsSergey Matyukevich
Fix merge artifact for commit 0b68fe10b8e8 ("qtnfmac: modify debugfs to support multiple cards") and finally add debugfs support for multiple qtnfmac wireless cards. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14qtnfmac: fix using skb after freeSergey Matyukevich
KASAN reported use-after-free error: [ 995.220767] BUG: KASAN: use-after-free in qtnf_cmd_send_with_reply+0x169/0x3e0 [qtnfmac] [ 995.221098] Read of size 2 at addr ffff888213d1ded0 by task kworker/1:1/71 The issue in qtnf_cmd_send_with_reply impacts all the commands that do not need response other then return code. For such commands, consume_skb is used for response skb and right after that return code in response skb is accessed. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14rtl8xxxu: Add support for Edimax EW-7611ULBJes Sorensen
A number of people have reported the Edimax EW-7611ULB works fine. Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14rtlwifi: rtl8192de: Fix missing enable interrupt flagLarry Finger
In commit 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for new drivers"), the flag that indicates that interrupts are enabled was never set. In addition, there are several places when enable/disable interrupts were commented out are restored. A sychronize_interrupts() call is removed. Fixes: 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for new drivers") Cc: Stable <stable@vger.kernel.org> # v3.18+ Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14rtlwifi: rtl8192de: Fix missing callback that tests for hw release of bufferLarry Finger
In commit 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for new drivers"), a callback needed to check if the hardware has released a buffer indicating that a DMA operation is completed was not added. Fixes: 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for new drivers") Cc: Stable <stable@vger.kernel.org> # v3.18+ Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14rtlwifi: rtl8192de: Fix missing code to retrieve RX buffer addressLarry Finger
In commit 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for new drivers"), a callback to get the RX buffer address was added to the PCI driver. Unfortunately, driver rtl8192de was not modified appropriately and the code runs into a WARN_ONCE() call. The use of an incorrect array is also fixed. Fixes: 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for new drivers") Cc: Stable <stable@vger.kernel.org> # 3.18+ Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-08ath10k: disable cpuidle during downloading firmwareIkjoon Jang
Downloading ath10k firmware needs a large number of IOs and cpuidle's miss predictions make it worse. In the worst case, resume time can be three times longer than the average on sdio. This patch disables cpuidle during firmware downloading by applying PM_QOS_CPU_DMA_LATENCY in ath10k_download_fw(). Tested-on: QCA9880 Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00029 Signed-off-by: Ikjoon Jang <ikjn@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-08ath10k: fix potential issue of peer stats allocationZhi Chen
STA number was not restored if OOM happened. Tested: QCA9984 with firmware ver 10.4-3.9.0.1-00018 Signed-off-by: Zhi Chen <zhichen@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-08ath10k: fix get invalid tx rate for Mesh metricMiaoqing Pan
ath10k does not provide transmit rate info per MSDU in tx completion, mark that as -1 so mac80211 will ignore the rates. This fixes mac80211 update Mesh link metric with invalid transmit rate info. Tested HW: QCA9984 Tested FW: 10.4-3.9.0.2-00035 Signed-off-by: Hou Bao Hou <houbao@codeaurora.org> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-08rtw88: signal completion even on firmware-request failureBrian Norris
Otherwise, the waiters (e.g., "modprobe rtwpci") will block forever. Fixes: f530c1961af2 ("rtw88: fix potential NULL pointer access for firmware") Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Brian Norris <briannorris@chromium.org> Acked-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-06rtw88: fix potential NULL pointer access for firmwareYan-Hsuan Chuang
Driver could access a NULL firmware pointer if we don't return here. Fixes: 5195b90426409 ("rtw88: avoid FW info flood") Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-06rtlwifi: fix memory leak in rtl92c_set_fw_rsvdpagepkt()Ping-Ke Shih
This leak was found by testing the EDIMAX EW-7612 on Raspberry Pi 3B+ with Linux 5.4-rc5 (multi_v7_defconfig + rtlwifi + kmemleak) and noticed a single memory leak during probe: unreferenced object 0xec13ee40 (size 176): comm "kworker/u8:1", pid 36, jiffies 4294939321 (age 5580.790s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<fc1bbb3e>] __netdev_alloc_skb+0x9c/0x164 [<863dfa6e>] rtl92c_set_fw_rsvdpagepkt+0x254/0x340 [rtl8192c_common] [<9572be0d>] rtl92cu_set_hw_reg+0xf48/0xfa4 [rtl8192cu] [<116df4d8>] rtl_op_bss_info_changed+0x234/0x96c [rtlwifi] [<8933575f>] ieee80211_bss_info_change_notify+0xb8/0x264 [mac80211] [<d4061e86>] ieee80211_assoc_success+0x934/0x1798 [mac80211] [<e55adb56>] ieee80211_rx_mgmt_assoc_resp+0x174/0x314 [mac80211] [<5974629e>] ieee80211_sta_rx_queued_mgmt+0x3f4/0x7f0 [mac80211] [<d91091c6>] ieee80211_iface_work+0x208/0x318 [mac80211] [<ac5fcae4>] process_one_work+0x22c/0x564 [<f5e6d3b6>] worker_thread+0x44/0x5d8 [<82c7b073>] kthread+0x150/0x154 [<b43e1b7d>] ret_from_fork+0x14/0x2c [<794dff30>] 0x0 It is because 8192cu doesn't implement usb_cmd_send_packet(), and this patch just frees the skb within the function to resolve memleak problem by now. Since 8192cu doesn't turn on fwctrl_lps that needs to download command packet for firmware via the function, applying this patch doesn't affect driver behavior. Reported-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-06rt2800: remove errornous duplicate conditionDaniel Golle
On 2019-10-28 06:07, wbob wrote: > Hello Roman, > > while reading around drivers/net/wireless/ralink/rt2x00/rt2800lib.c > I stumbled on what I think is an edit of yours made in error in march > 2017: > > https://github.com/torvalds/linux/commit/41977e86#diff-dae5dc10da180f3b055809a48118e18aR5281 > > RT6352 in line 5281 should not have been introduced as the "else if" > below line 5291 can then not take effect for a RT6352 device. Another > possibility is for line 5291 to be not for RT6352, but this seems > very unlikely. Are you able to clarify still after this substantial time? > > 5277: static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) > ... > 5279: } else if (rt2x00_rt(rt2x00dev, RT5390) || > 5280: rt2x00_rt(rt2x00dev, RT5392) || > 5281: rt2x00_rt(rt2x00dev, RT6352)) { > ... > 5291: } else if (rt2x00_rt(rt2x00dev, RT6352)) { > ... Hence remove errornous line 5281 to make the driver actually execute the correct initialization routine for MT7620 chips. As it was requested by Stanislaw Gruszka remove setting values of MIMO_PS_CFG and TX_PIN_CFG. MIMO_PS_CFG is responsible for MIMO power-safe mode (which is disabled), hence we can drop setting it. TX_PIN_CFG is set correctly in other functions, and as setting this value breaks some devices, rather don't set it here during init, but only modify it later on. Fixes: 41977e86c984 ("rt2x00: add support for MT7620") Reported-by: wbob <wbob@jify.de> Reported-by: Roman Yeryomin <roman@advem.lv> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-06rtlwifi: rtl8225se: remove some unused const variablesYueHaibing
drivers/net/wireless//realtek/rtl818x/rtl8180/rtl8225se.c:83:17: warning: 'rtl8225sez2_tx_power_cck' defined but not used [-Wunused-const-variable=] drivers/net/wireless//realtek/rtl818x/rtl8180/rtl8225se.c:79:17: warning: 'rtl8225sez2_tx_power_cck_A' defined but not used [-Wunused-const-variable=] drivers/net/wireless//realtek/rtl818x/rtl8180/rtl8225se.c:75:17: warning: 'rtl8225sez2_tx_power_cck_B' defined but not used [-Wunused-const-variable=] drivers/net/wireless//realtek/rtl818x/rtl8180/rtl8225se.c:71:17: warning: 'rtl8225sez2_tx_power_cck_ch14' defined but not used [-Wunused-const-variable=] drivers/net/wireless//realtek/rtl818x/rtl8180/rtl8225se.c:62:17: warning: 'rtl8225se_tx_power_ofdm' defined but not used [-Wunused-const-variable=] drivers/net/wireless//realtek/rtl818x/rtl8180/rtl8225se.c:53:17: warning: 'rtl8225se_tx_power_cck_ch14' defined but not used [-Wunused-const-variable=] drivers/net/wireless//realtek/rtl818x/rtl8180/rtl8225se.c:44:17: warning: 'rtl8225se_tx_power_cck' defined but not used [-Wunused-const-variable=] drivers/net/wireless//realtek/rtl818x/rtl8180/rtl8225se.c:40:17: warning: 'rtl8225se_tx_gain_cck_ofdm' defined but not used [-Wunused-const-variable=] They are never used, so can be removed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-06brcmsmac: remove set but not used variablesYueHaibing
drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c:841:7: warning: variable free_pdu set but not used [-Wunused-but-set-variable] drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c:842:30: warning: variable tx_rts_count set but not used [-Wunused-but-set-variable] drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c:842:6: warning: variable tx_rts set but not used [-Wunused-but-set-variable] drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c:843:7: warning: variable totlen set but not used [-Wunused-but-set-variable] They are never used, so can be removed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-06rtw88: raise LPS threshold to 50, for less power consumptionYan-Hsuan Chuang
The LPS threshold was set to 2, means driver will leave LPS mode if there is more than 2 frames TX/RX for every 2 seconds. This makes driver enter/leave LPS frequently even if we just "ping -i1" to the others. Apparently we do not want to leave LPS mode if there is only some background traffics or web surfing. By experiment, set this to 50 is a more reasonable value to lower the over all power consumption. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-07-16 02:51:52 +0000