summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-09-19netdevsim: Fix hwstats debugfs file permissionsIdo Schimmel
The hwstats debugfs files are only writeable, but they are created with read and write permissions, causing certain selftests to fail [1]. Fix by creating the files with write permission only. [1] # ./test_offload.py Test destruction of generic XDP... Traceback (most recent call last): File "/home/idosch/code/linux/tools/testing/selftests/bpf/./test_offload.py", line 810, in <module> simdev = NetdevSimDev() [...] Exception: Command failed: cat /sys/kernel/debug/netdevsim/netdevsim0//ports/0/dev/hwstats/l3/disable_ifindex cat: /sys/kernel/debug/netdevsim/netdevsim0//ports/0/dev/hwstats/l3/disable_ifindex: Invalid argument Fixes: 1a6d7ae7d63c ("netdevsim: Introduce support for L3 offload xstats") Reported-by: Jie2x Zhou <jie2x.zhou@intel.com> Tested-by: Jie2x Zhou <jie2x.zhou@intel.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/20220909153830.3732504-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-19i40e: Fix set max_tx_rate when it is lower than 1 MbpsMichal Jaron
While converting max_tx_rate from bytes to Mbps, this value was set to 0, if the original value was lower than 125000 bytes (1 Mbps). This would cause no transmission rate limiting to occur. This happened due to lack of check of max_tx_rate against the 1 Mbps value for max_tx_rate and the following division by 125000. Fix this issue by adding a helper i40e_bw_bytes_to_mbits() which sets max_tx_rate to minimum usable value of 50 Mbps, if its value is less than 1 Mbps, otherwise do the required conversion by dividing by 125000. Fixes: 5ecae4120a6b ("i40e: Refactor VF BW rate limiting") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Andrii Staikov <andrii.staikov@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-19i40e: Fix VF set max MTU sizeMichal Jaron
Max MTU sent to VF is set to 0 during memory allocation. It cause that max MTU on VF is changed to IAVF_MAX_RXBUFFER and does not depend on data from HW. Set max_mtu field in virtchnl_vf_resource struct to inform VF in GET_VF_RESOURCES msg what size should be max frame. Fixes: dab86afdbbd1 ("i40e/i40evf: Change the way we limit the maximum frame size for Rx") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-19iavf: Fix set max MTU size with port VLAN and jumbo framesMichal Jaron
After setting port VLAN and MTU to 9000 on VF with ice driver there was an iavf error "PF returned error -5 (IAVF_ERR_PARAM) to our request 6". During queue configuration, VF's max packet size was set to IAVF_MAX_RXBUFFER but on ice max frame size was smaller by VLAN_HLEN due to making some space for port VLAN as VF is not aware whether it's in a port VLAN. This mismatch in sizes caused ice to reject queue configuration with ERR_PARAM error. Proper max_mtu is sent from ice PF to VF with GET_VF_RESOURCES msg but VF does not look at this. In iavf change max_frame from IAVF_MAX_RXBUFFER to max_mtu received from pf with GET_VF_RESOURCES msg to make vf's max_frame_size dependent from pf. Add check if received max_mtu is not in eligible range then set it to IAVF_MAX_RXBUFFER. Fixes: dab86afdbbd1 ("i40e/i40evf: Change the way we limit the maximum frame size for Rx") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-19mlxbf_gige: clear MDIO gateway lock after readDavid Thompson
The MDIO gateway (GW) lock in BlueField-2 GIGE logic is set after read. This patch adds logic to make sure the lock is always cleared at the end of each MDIO transaction. Fixes: f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver") Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com> Signed-off-by: David Thompson <davthompson@nvidia.com> Link: https://lore.kernel.org/r/20220902164247.19862-1-davthompson@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-19iavf: Fix bad page stateNorbert Zulinski
Fix bad page state, free inappropriate page in handling dummy descriptor. iavf_build_skb now has to check not only if rx_buffer is NULL but also if size is zero, same thing in iavf_clean_rx_irq. Without this patch driver would free page that will be used by napi_build_skb. Fixes: a9f49e006030 ("iavf: Fix handling of dummy receive descriptors") Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-19um: Prevent KASAN splats in dump_stack()Vincent Whitchurch
Use READ_ONCE_NOCHECK() when reading the stack to prevent KASAN splats when dump_stack() is used. Fixes: 5b301409e8bc5d7fad ("UML: add support for KASAN under x86_64") Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2022-09-19um: fix default console kernel parameterChristian Lamparter
OpenWrt's UML with 5.15 was producing odd errors/warnings during preinit part of the early userspace portion: |[ 0.000000] Kernel command line: ubd0=root.img root=98:0 console=tty |[...] |[ 0.440000] random: jshn: uninitialized urandom read (4 bytes read) |[ 0.460000] random: jshn: uninitialized urandom read (4 bytes read) |/etc/preinit: line 47: can't create /dev/tty: No such device or address |/etc/preinit: line 48: can't create /dev/tty: No such device or address |/etc/preinit: line 58: can't open /dev/tty: No such device or address |[...] repeated many times That "/dev/tty" came from the command line (which is automatically added if no console= parameter was specified for the uml binary). The TLDP project tells the following about the /dev/tty: <https://tldp.org/HOWTO/Text-Terminal-HOWTO-7.html#ss7.3> | /dev/tty stands for the controlling terminal (if any) for the current | process.[...] | /dev/tty is something like a link to the actually terminal device[..] The "(if any)" is important here, since it's possible for processes to not have a controlling terminal. I think this was a simple typo and the author wanted tty0 there. CC: Thomas Meyer <thomas@m3y3r.de> Fixes: d7ffac33631b ("um: stdio_console: Make preferred console") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2022-09-19um: Cleanup compiler warning in arch/x86/um/tls_32.cLukas Straub
arch.tls_array is statically allocated so checking for NULL doesn't make sense. This causes the compiler warning below. Remove the checks to silence these warnings. ../arch/x86/um/tls_32.c: In function 'get_free_idx': ../arch/x86/um/tls_32.c:68:13: warning: the comparison will always evaluate as 'true' for the address of 'tls_array' will never be NULL [-Waddress] 68 | if (!t->arch.tls_array) | ^ In file included from ../arch/x86/um/asm/processor.h:10, from ../include/linux/rcupdate.h:30, from ../include/linux/rculist.h:11, from ../include/linux/pid.h:5, from ../include/linux/sched.h:14, from ../arch/x86/um/tls_32.c:7: ../arch/x86/um/asm/processor_32.h:22:31: note: 'tls_array' declared here 22 | struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES]; | ^~~~~~~~~ ../arch/x86/um/tls_32.c: In function 'get_tls_entry': ../arch/x86/um/tls_32.c:243:13: warning: the comparison will always evaluate as 'true' for the address of 'tls_array' will never be NULL [-Waddress] 243 | if (!t->arch.tls_array) | ^ ../arch/x86/um/asm/processor_32.h:22:31: note: 'tls_array' declared here 22 | struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES]; | ^~~~~~~~~ Signed-off-by: Lukas Straub <lukasstraub2@web.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Richard Weinberger <richard@nod.at>
2022-09-19um: Cleanup syscall_handler_t cast in syscalls_32.hLukas Straub
Like in f4f03f299a56ce4d73c5431e0327b3b6cb55ebb9 "um: Cleanup syscall_handler_t definition/cast, fix warning", remove the cast to to fix the compiler warning. Signed-off-by: Lukas Straub <lukasstraub2@web.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Richard Weinberger <richard@nod.at>
2022-09-19KVM: arm64: Use kmemleak_free_part_phys() to unregister hyp_mem_baseZenghui Yu
With commit 0c24e061196c ("mm: kmemleak: add rbtree and store physical address for objects allocated with PA"), kmemleak started to put the objects allocated with physical address onto object_phys_tree_root tree. The kmemleak_free_part() therefore no longer worked as expected on physically allocated objects (hyp_mem_base in this case) as it attempted to search and remove things in object_tree_root tree. Fix it by using kmemleak_free_part_phys() to unregister hyp_mem_base. This fixes an immediate crash when booting a KVM host in protected mode with kmemleak enabled. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220908130659.2021-1-yuzenghui@huawei.com
2022-09-19MIPS: Loongson32: Fix PHY-mode being left unspecifiedSerge Semin
commit 0060c8783330 ("net: stmmac: implement support for passive mode converters via dt") has changed the plat->interface field semantics from containing the PHY-mode to specifying the MAC-PCS interface mode. Due to that the loongson32 platform code will leave the phylink interface uninitialized with the PHY-mode intended by the means of the actual platform setup. The commit-author most likely has just missed the arch-specific code to fix. Let's mend the Loongson32 platform code then by assigning the PHY-mode to the phy_interface field of the STMMAC platform data. Fixes: 0060c8783330 ("net: stmmac: implement support for passive mode converters via dt") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com> Tested-by: Keguang Zhang <keguang.zhang@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-09-19MIPS: lantiq: export clk_get_io() for lantiq_wdt.koRandy Dunlap
The lantiq WDT driver uses clk_get_io(), which is not exported, so export it to fix a build error: ERROR: modpost: "clk_get_io" [drivers/watchdog/lantiq_wdt.ko] undefined! Fixes: 287e3f3f4e68 ("MIPS: lantiq: implement support for clkdev api") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: John Crispin <john@phrozen.org> Cc: linux-mips@vger.kernel.org Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-09-19mm/slab_common: fix possible double free of kmem_cacheFeng Tang
When doing slub_debug test, kfence's 'test_memcache_typesafe_by_rcu' kunit test case cause a use-after-free error: BUG: KASAN: use-after-free in kobject_del+0x14/0x30 Read of size 8 at addr ffff888007679090 by task kunit_try_catch/261 CPU: 1 PID: 261 Comm: kunit_try_catch Tainted: G B N 6.0.0-rc5-next-20220916 #17 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x48 print_address_description.constprop.0+0x87/0x2a5 print_report+0x103/0x1ed kasan_report+0xb7/0x140 kobject_del+0x14/0x30 kmem_cache_destroy+0x130/0x170 test_exit+0x1a/0x30 kunit_try_run_case+0xad/0xc0 kunit_generic_run_threadfn_adapter+0x26/0x50 kthread+0x17b/0x1b0 </TASK> The cause is inside kmem_cache_destroy(): kmem_cache_destroy acquire lock/mutex shutdown_cache schedule_work(kmem_cache_release) (if RCU flag set) release lock/mutex kmem_cache_release (if RCU flag not set) In some certain timing, the scheduled work could be run before the next RCU flag checking, which can then get a wrong value and lead to double kmem_cache_release(). Fix it by caching the RCU flag inside protected area, just like 'refcnt' Fixes: 0495e337b703 ("mm/slab_common: Deleting kobject in kmem_cache_destroy() without holding slab_mutex/cpu_hotplug_lock") Signed-off-by: Feng Tang <feng.tang@intel.com> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Reviewed-by: Waiman Long <longman@redhat.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
2022-09-19ALSA: core: Fix double-free at snd_card_new()Takashi Iwai
During the code change to add the support for devres-managed card instance, we put an explicit kfree(card) call at the error path in snd_card_new(). This is needed for the early error path before the card is initialized with the device, but is rather superfluous and causes a double-free at the error path after the card instance is initialized, as the destructor of the card object already contains a kfree() call. This patch fixes the double-free situation by removing the superfluous kfree(). Meanwhile we need to call kfree() explicitly for the early error path, so it's added there instead. Fixes: e8ad415b7a55 ("ALSA: core: Add managed card creation") Reported-by: Rondreis <linhaoguo86@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/CAB7eexL1zBnB636hwS27d-LdPYZ_R1-5fJS_h=ZbCWYU=UPWJg@mail.gmail.com Link: https://lore.kernel.org/r/20220919123516.28222-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-09-19ALSA: hda/realtek: Add a quirk for HP OMEN 16 (8902) mute LEDDaniel Houldsworth
Similair to the HP OMEN 15, the HP OMEN 16 also needs ALC285_FIXUP_HP_MUTE_LED for the mute LED to work. [ Rearranged the entry in PCI SSID order by tiwai ] Signed-off-by: Daniel Houldsworth <dhould3@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220918171300.24693-1-dhould3@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-09-19drm/panel: simple: Fix innolux_g121i1_l01 bus_formatHeiko Schocher
innolux_g121i1_l01 sets bpc to 6, so use the corresponding bus format: MEDIA_BUS_FMT_RGB666_1X7X3_SPWG. Fixes: 4ae13e486866 ("drm/panel: simple: Add more properties to Innolux G121I1-L01") Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220826165021.1592532-1-festevam@denx.de
2022-09-18Linux 6.0-rc6Linus Torvalds
2022-09-18Merge tag 'parisc-for-6.0-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: "Some small parisc architecture fixes for 6.0-rc6: One patch lightens up a previous commit and thus unbreaks building the debian kernel, which tries to configure a 64-bit kernel with the ARCH=parisc environment variable set. The other patches fixes asm/errno.h includes in the tools directory and cleans up memory allocation in the iosapic driver. Summary: - Allow configuring 64-bit kernel with ARCH=parisc - Fix asm/errno.h includes in tools directory for parisc and xtensa - Clean up iosapic memory allocation - Minor typo and spelling fixes" * tag 'parisc-for-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Allow CONFIG_64BIT with ARCH=parisc parisc: remove obsolete manual allocation aligning in iosapic tools/include/uapi: Fix <asm/errno.h> for parisc and xtensa Input: hp_sdc: fix spelling typo in comment parisc: ccio-dma: Add missing iounmap in error path in ccio_probe()
2022-09-18Merge tag 'io_uring-6.0-2022-09-18' of git://git.kernel.dk/linuxLinus Torvalds
Pull io_uring fixes from Jens Axboe: "Nothing really major here, but figured it'd be nicer to just get these flushed out for -rc6 so that the 6.1 branch will have them as well. That'll make our lives easier going forward in terms of development, and avoid trivial conflicts in this area. - Simple trace rename so that the returned opcode name is consistent with the enum definition (Stefan) - Send zc rsrc request vs notification lifetime fix (Pavel)" * tag 'io_uring-6.0-2022-09-18' of git://git.kernel.dk/linux: io_uring/opdef: rename SENDZC_NOTIF to SEND_ZC io_uring/net: fix zc fixed buf lifetime
2022-09-18io_uring/opdef: rename SENDZC_NOTIF to SEND_ZCStefan Metzmacher
It's confusing to see the string SENDZC_NOTIF in ftrace output when using IORING_OP_SEND_ZC. Fixes: b48c312be05e8 ("io_uring/net: simplify zerocopy send user API") Signed-off-by: Stefan Metzmacher <metze@samba.org> Cc: Pavel Begunkov <asml.silence@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: io-uring@vger.kernel.org Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/8e5cd8616919c92b6c3c7b6ea419fdffd5b97f3c.1663363798.git.metze@samba.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-18io_uring/net: fix zc fixed buf lifetimePavel Begunkov
Notifications usually outlive requests, so we need to pin buffers with it by assigning a rsrc to it instead of the request. Fixed: b48c312be05e8 ("io_uring/net: simplify zerocopy send user API") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/dd6406ff8a90887f2b36ed6205dac9fda17c1f35.1663366886.git.asml.silence@gmail.com Reviewed-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-17RISC-V: Avoid coupling the T-Head CMOs and ZicbomPalmer Dabbelt
We could make the T-Head CMOs depend on a new-enough assembler to have Zicbom, but it's not strictly necessary because the T-Head CMOs circumvent the assembler. Fixes: 8f7e001e0325 ("RISC-V: Clean up the Zicbom block size probing") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220915170900.22685-1-palmer@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-09-17riscv: fix a nasty sigreturn bug...Al Viro
riscv has an equivalent of arm bug fixed by 653d48b22166 ("arm: fix really nasty sigreturn bug"); if signal gets caught by an interrupt that hits when we have the right value in a0 (-513), *and* another signal gets delivered upon sigreturn() (e.g. included into the blocked mask for the first signal and posted while the handler had been running), the syscall restart logics will see regs->cause equal to EXC_SYSCALL (we are in a syscall, after all) and a0 already restored to its original value (-513, which happens to be -ERESTARTNOINTR) and assume that we need to apply the usual syscall restart logics. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Fixes: e2c0cdfba7f6 ("RISC-V: User-facing API") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/YxJEiSq%2FCGaL6Gm9@ZenIV/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-09-17riscv: make t-head erratas depend on MMUHeiko Stuebner
Both basic extensions of SVPBMT and ZICBOM depend on CONFIG_MMU. Make the T-Head errata implementations of the similar functionality also depend on it to prevent build errors. Fixes: a35707c3d850 ("riscv: add memory-type errata for T-Head") Fixes: d20ec7529236 ("riscv: implement cache-management errata for T-Head SoCs") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Guo Ren <guoren@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220907154932.2858518-1-heiko@sntech.de Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-09-17riscv: fix RISCV_ISA_SVPBMT kconfig dependency warningRandy Dunlap
RISCV_ISA_SVPBMT selects RISCV_ALTERNATIVE which depends on !XIP_KERNEL. Therefore RISCV_ISA_SVPBMT should also depend on !XIP_KERNEL so quieten this kconfig warning: WARNING: unmet direct dependencies detected for RISCV_ALTERNATIVE Depends on [n]: !XIP_KERNEL [=y] Selected by [y]: - RISCV_ISA_SVPBMT [=y] && 64BIT [=y] && MMU [=y] Fixes: ff689fd21cb1 ("riscv: add RISC-V Svpbmt extension support") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: stable@vger.kernel.org Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20220709014929.14221-1-rdunlap@infradead.org/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-09-16kasan: call kasan_malloc() from __kmalloc_*track_caller()Peter Collingbourne
We were failing to call kasan_malloc() from __kmalloc_*track_caller() which was causing us to sometimes fail to produce KASAN error reports for allocations made using e.g. devm_kcalloc(), as the KASAN poison was not being initialized. Fix it. Signed-off-by: Peter Collingbourne <pcc@google.com> Cc: <stable@vger.kernel.org> # 5.15 Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
2022-09-16Merge tag 'gpio-fixes-for-v6.0-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix the level-low interrupt type support in gpio-mpc8xxx - convert another two drivers to using immutable irq chips - MAINTAINERS update * tag 'gpio-fixes-for-v6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: mt7621: Make the irqchip immutable gpio: ixp4xx: Make irqchip immutable MAINTAINERS: Update HiSilicon GPIO Driver maintainer gpio: mpc8xxx: Fix support for IRQ_TYPE_LEVEL_LOW flow_type in mpc85xx
2022-09-16tcp: Use WARN_ON_ONCE() in tcp_read_skb()Peilin Ye
Prevent tcp_read_skb() from flooding the syslog. Suggested-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-16ALSA: hda/hdmi: Fix the converter reuse for the silent streamJaroslav Kysela
When the user space pcm stream uses the silent stream converter, it is no longer allocated for the silent stream. Clear the appropriate flag in the hdmi_pcm_open() function. The silent stream setup may be applied in hdmi_pcm_close() (and the error path - open fcn) again. If the flag is not cleared, the reuse conditions for the silent stream converter in hdmi_choose_cvt() may improperly share this converter. Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20220913070216.3233974-1-perex@perex.cz Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-09-16Merge tag 'pinctrl-v6.0-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Nothing special, just driver fixes: - Fix IRQ wakeup and pins for UFS and SDC2 issues on the Qualcomm SC8180x - Fix the Rockchip driver to support interrupt on both rising and falling edges. - Name the Allwinner A100 R_PIO properly - Fix several issues with the Ocelot interrupts" * tag 'pinctrl-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: ocelot: Fix interrupt controller pinctrl: sunxi: Fix name for A100 R_PIO pinctrl: rockchip: Enhance support for IRQ_TYPE_EDGE_BOTH pinctrl: qcom: sc8180x: Fix wrong pin numbers pinctrl: qcom: sc8180x: Fix gpio_wakeirq_map
2022-09-16Merge tag 'block-6.0-2022-09-16' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Two fixes for -rc6: - Fix a mixup of sectors and bytes in the secure erase ioctl (Mikulas) - Fix for a bad return value for a non-blocking bio/blk queue enter call (me)" * tag 'block-6.0-2022-09-16' of git://git.kernel.dk/linux-block: blk-lib: fix blkdev_issue_secure_erase block: blk_queue_enter() / __bio_queue_enter() must return -EAGAIN for nowait
2022-09-16Merge tag 'io_uring-6.0-2022-09-16' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fixes from Jens Axboe: "Two small patches: - Fix using an unsigned type for the return value, introduced in this release (Pavel) - Stable fix for a missing check for a fixed file on put (me)" * tag 'io_uring-6.0-2022-09-16' of git://git.kernel.dk/linux-block: io_uring/msg_ring: check file type before putting io_uring/rw: fix error'ed retry return values
2022-09-16Merge tag 'drm-fixes-2022-09-16' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "This is the regular drm fixes pull. The i915 and misc fixes are fairly regular, but the amdgpu contains fixes for new hw blocks, the dcn314 specific path hookups and also has a bunch of fixes for clang stack size warnings which are a bit churny but fairly straightforward. This means it looks a little larger than usual. amdgpu: - BACO fixes for some RDNA2 boards - PCI AER fixes uncovered by a core PCI change - Properly hook up dirtyfb helper - RAS fixes for GC 11.x - TMR fix - DCN 3.2.x fixes - DCN 3.1.4 fixes - LLVM DML stack size fixes i915: - Revert a display patch around max DP source rate now that the proper WaEdpLinkRateDataReload is in place - Fix perf limit reasons bit position - Fix unclaimmed mmio registers on suspend flow with GuC - A vma_move_to_active fix for a regression with video decoding - DP DSP fix gma500: - Locking and IRQ fixes meson: - OSD1 display fixes panel-edp: - Fix Innolux timings rockchip: - DP/HDMI fixes" * tag 'drm-fixes-2022-09-16' of git://anongit.freedesktop.org/drm/drm: (42 commits) drm/amdgpu: make sure to init common IP before gmc drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vega drm/amdgpu: move nbio ih_doorbell_range() into ih code for vega drm/rockchip: Fix return type of cdn_dp_connector_mode_valid drm/amd/display: Mark dml30's UseMinimumDCFCLK() as noinline for stack usage drm/amd/display: Reduce number of arguments of dml31's CalculateFlipSchedule() drm/amd/display: Reduce number of arguments of dml31's CalculateWatermarksAndDRAMSpeedChangeSupport() drm/amd/display: Reduce number of arguments of dml32_CalculatePrefetchSchedule() drm/amd/display: Reduce number of arguments of dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport() drm/amd/display: Refactor SubVP calculation to remove FPU drm/amd/display: Limit user regamma to a valid value drm/amd/display: add workaround for subvp cursor corruption for DCN32/321 drm/amd/display: SW cursor fallback for SubVP drm/amd/display: Round cursor width up for MALL allocation drm/amd/display: Correct dram channel width for dcn314 drm/amd/display: Relax swizzle checks for video non-RGB formats on DCN314 drm/amd/display: Hook up DCN314 specific dml implementation drm/amd/display: Enable dlg and vba compilation for dcn314 drm/amd/display: Fix compilation errors on DCN314 drm/amd/display: Fix divide by zero in DML ...
2022-09-16Merge tag '6.0-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: "Four smb3 fixes for stable: - important fix to revalidate mapping when doing direct writes - missing spinlock - two fixes to socket handling - trivial change to update internal version number for cifs.ko" * tag '6.0-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module number cifs: add missing spinlock around tcon refcount cifs: always initialize struct msghdr smb_msg completely cifs: don't send down the destination address to sendmsg for a SOCK_STREAM cifs: revalidate mapping when doing direct writes
2022-09-16Merge branch 'net-unsync-addresses-from-ports'David S. Miller
From: Benjamin Poirier <bpoirier@nvidia.com> To: netdev@vger.kernel.org Cc: Jay Vosburgh <j.vosburgh@gmail.com>, Veaceslav Falico <vfalico@gmail.com>, Andy Gospodarek <andy@greyhouse.net>, "David S. Miller" <davem@davemloft.net>, Eric Dumazet <edumazet@google.com>, Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>, Jiri Pirko <jiri@resnulli.us>, Shuah Khan <shuah@kernel.org>, Jonathan Toppins <jtoppins@redhat.com>, linux-kselftest@vger.kernel.org Subject: [PATCH net v3 0/4] Unsync addresses from ports when stopping aggregated devices Date: Wed, 7 Sep 2022 16:56:38 +0900 [thread overview] Message-ID: <20220907075642.475236-1-bpoirier@nvidia.com> (raw) This series fixes similar problems in the bonding and team drivers. Because of missing dev_{uc,mc}_unsync() calls, addresses added to underlying devices may be leftover after the aggregated device is deleted. Add the missing calls and a few related tests. v2: * fix selftest installation, see patch 3 v3: * Split lacpdu_multicast changes to their own patch, #1 * In ndo_{add,del}_slave methods, only perform address list changes when the aggregated device is up (patches 2 & 3) * Add selftest function related to the above change (patch 4) ==================== Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-16net: Add tests for bonding and team address list managementBenjamin Poirier
Test that the bonding and team drivers clean up an underlying device's address lists (dev->uc, dev->mc) when the aggregated device is deleted. Test addition and removal of the LACPDU multicast address on underlying devices by the bonding driver. v2: * add lag_lib.sh to TEST_FILES v3: * extend bond_listen_lacpdu_multicast test to init_state up and down cases * remove some superfluous shell syntax and 'set dev ... up' commands Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-16net: team: Unsync device addresses on ndo_stopBenjamin Poirier
Netdev drivers are expected to call dev_{uc,mc}_sync() in their ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method. This is mentioned in the kerneldoc for those dev_* functions. The team driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have already been emptied in unregister_netdevice_many() before ndo_uninit is called. This mistake can result in addresses being leftover on former team ports after a team device has been deleted; see test_LAG_cleanup() in the last patch in this series. Add unsync calls at their expected location, team_close(). v3: * When adding or deleting a port, only sync/unsync addresses if the team device is up. In other cases, it is taken care of at the right time by ndo_open/ndo_set_rx_mode/ndo_stop. Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-16net: bonding: Unsync device addresses on ndo_stopBenjamin Poirier
Netdev drivers are expected to call dev_{uc,mc}_sync() in their ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method. This is mentioned in the kerneldoc for those dev_* functions. The bonding driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have already been emptied in unregister_netdevice_many() before ndo_uninit is called. This mistake can result in addresses being leftover on former bond slaves after a bond has been deleted; see test_LAG_cleanup() in the last patch in this series. Add unsync calls, via bond_hw_addr_flush(), at their expected location, bond_close(). Add dev_mc_add() call to bond_open() to match the above change. v3: * When adding or deleting a slave, only sync/unsync, add/del addresses if the bond is up. In other cases, it is taken care of at the right time by ndo_open/ndo_set_rx_mode/ndo_stop. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-16net: bonding: Share lacpdu_mcast_addr definitionBenjamin Poirier
There are already a few definitions of arrays containing MULTICAST_LACPDU_ADDR and the next patch will add one more use. These all contain the same constant data so define one common instance for all bonding code. Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-16Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-09-08 (ice, iavf) This series contains updates to ice and iavf drivers. Dave removes extra unplug of auxiliary bus on reset which caused a scheduling while atomic to be reported for ice. Ding Hui defers setting of queues for TCs to ensure valid configuration and restores old config if invalid for ice. Sylwester fixes a check of setting MAC address to occur after result is received from PF for iavf driver. Brett changes check of ring tail to use software cached value as not all devices have access to register tail for iavf driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-16net: marvell: prestera: add support for for Aldrin2Oleksandr Mazur
Aldrin2 (98DX8525) is a Marvell Prestera PP, with 100G support. Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> V2: - retarget to net tree instead of net-next; - fix missed colon in patch subject ('net marvell' vs 'net: mavell'); Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-16net/ieee802154: fix uninit value bug in dgram_sendmsgHaimin Zhang
There is uninit value bug in dgram_sendmsg function in net/ieee802154/socket.c when the length of valid data pointed by the msg->msg_name isn't verified. We introducing a helper function ieee802154_sockaddr_check_size to check namelen. First we check there is addr_type in ieee802154_addr_sa. Then, we check namelen according to addr_type. Also fixed in raw_bind, dgram_bind, dgram_connect. Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-16xen/xenbus: fix xenbus_setup_ring()Juergen Gross
Commit 4573240f0764 ("xen/xenbus: eliminate xenbus_grant_ring()") introduced an error for initialization of multi-page rings. Cc: stable@vger.kernel.org Fixes: 4573240f0764 ("xen/xenbus: eliminate xenbus_grant_ring()") Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-09-16Merge tag 'drm-intel-fixes-2022-09-15' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Revert a display patch around max DP source rate now that the proper WaEdpLinkRateDataReload is in place. (Ville) - Fix perf limit reasons bit position. (Ashutosh) - Fix unclaimmed mmio registers on suspend flow with GuC. (Umesh) - A vma_move_to_active fix for a regression with video decoding. (Nirmoy) - DP DSP fix. (Ankit) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YyMtmGMXRLsURoM5@intel.com
2022-09-16Merge tag 'drm-misc-fixes-2022-09-15' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Short summary of fixes pull: * gma500: Locking and IRQ fixes * meson: OSD1 display fixes * panel-edp: Fix Innolux timings * rockchip: DP/HDMI fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YyMUpP1w21CPXq+I@linux-uq9g
2022-09-16Merge tag 'amd-drm-fixes-6.0-2022-09-14' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.0-2022-09-14: amdgpu: - BACO fixes for some RDNA2 boards - PCI AER fixes uncovered by a core PCI change - Properly hook up dirtyfb helper - RAS fixes for GC 11.x - TMR fix - DCN 3.2.x fixes - DCN 3.1.4 fixes - LLVM DML stack size fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220914184030.6145-1-alexander.deucher@amd.com
2022-09-15scsi: mpt3sas: Fix return value check of dma_get_required_mask()Sreekanth Reddy
Fix the incorrect return value check of dma_get_required_mask(). Due to this incorrect check, the driver was always setting the DMA mask to 63 bit. Link: https://lore.kernel.org/r/20220913120538.18759-2-sreekanth.reddy@broadcom.com Fixes: ba27c5cf286d ("scsi: mpt3sas: Don't change the DMA coherent mask after allocations") Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-15scsi: qla2xxx: Fix memory leak in __qlt_24xx_handle_abts()Rafael Mendonca
Commit 8f394da36a36 ("scsi: qla2xxx: Drop TARGET_SCF_LOOKUP_LUN_FROM_TAG") made the __qlt_24xx_handle_abts() function return early if tcm_qla2xxx_find_cmd_by_tag() didn't find a command, but it missed to clean up the allocated memory for the management command. Link: https://lore.kernel.org/r/20220914024924.695604-1-rafaelmendsr@gmail.com Fixes: 8f394da36a36 ("scsi: qla2xxx: Drop TARGET_SCF_LOOKUP_LUN_FROM_TAG") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-15scsi: qedf: Fix a UAF bug in __qedf_probe()Letu Ren
In __qedf_probe(), if qedf->cdev is NULL which means qed_ops->common->probe() failed, then the program will goto label err1, and scsi_host_put() will free lport->host pointer. Because the memory qedf points to is allocated by libfc_host_alloc(), it will be freed by scsi_host_put(). However, the if statement below label err0 only checks whether qedf is NULL but doesn't check whether the memory has been freed. So a UAF bug can occur. There are two ways to reach the statements below err0. The first one is described as before, "qedf" should be set to NULL. The second one is goto "err0" directly. In the latter scenario qedf hasn't been changed and it has the initial value NULL. As a result the if statement is not reachable in any situation. The KASAN logs are as follows: [ 2.312969] BUG: KASAN: use-after-free in __qedf_probe+0x5dcf/0x6bc0 [ 2.312969] [ 2.312969] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 2.312969] Call Trace: [ 2.312969] dump_stack_lvl+0x59/0x7b [ 2.312969] print_address_description+0x7c/0x3b0 [ 2.312969] ? __qedf_probe+0x5dcf/0x6bc0 [ 2.312969] __kasan_report+0x160/0x1c0 [ 2.312969] ? __qedf_probe+0x5dcf/0x6bc0 [ 2.312969] kasan_report+0x4b/0x70 [ 2.312969] ? kobject_put+0x25d/0x290 [ 2.312969] kasan_check_range+0x2ca/0x310 [ 2.312969] __qedf_probe+0x5dcf/0x6bc0 [ 2.312969] ? selinux_kernfs_init_security+0xdc/0x5f0 [ 2.312969] ? trace_rpm_return_int_rcuidle+0x18/0x120 [ 2.312969] ? rpm_resume+0xa5c/0x16e0 [ 2.312969] ? qedf_get_generic_tlv_data+0x160/0x160 [ 2.312969] local_pci_probe+0x13c/0x1f0 [ 2.312969] pci_device_probe+0x37e/0x6c0 Link: https://lore.kernel.org/r/20211112120641.16073-1-fantasquex@gmail.com Reported-by: Zheyu Ma <zheyuma97@gmail.com> Acked-by: Saurav Kashyap <skashyap@marvell.com> Co-developed-by: Wende Tan <twd2.me@gmail.com> Signed-off-by: Wende Tan <twd2.me@gmail.com> Signed-off-by: Letu Ren <fantasquex@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-07-16 03:36:13 +0000