summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-03-02btrfs: add missing run of delayed items after unlink during log replayFilipe Manana
During log replay, whenever we need to check if a name (dentry) exists in a directory we do searches on the subvolume tree for inode references or or directory entries (BTRFS_DIR_INDEX_KEY keys, and BTRFS_DIR_ITEM_KEY keys as well, before kernel 5.17). However when during log replay we unlink a name, through btrfs_unlink_inode(), we may not delete inode references and dir index keys from a subvolume tree and instead just add the deletions to the delayed inode's delayed items, which will only be run when we commit the transaction used for log replay. This means that after an unlink operation during log replay, if we attempt to search for the same name during log replay, we will not see that the name was already deleted, since the deletion is recorded only on the delayed items. We run delayed items after every unlink operation during log replay, except at unlink_old_inode_refs() and at add_inode_ref(). This was due to an overlook, as delayed items should be run after evert unlink, for the reasons stated above. So fix those two cases. Fixes: 0d836392cadd5 ("Btrfs: fix mount failure after fsync due to hard link recreation") Fixes: 1f250e929a9c9 ("Btrfs: fix log replay failure after unlink and link combination") CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-03-02btrfs: qgroup: fix deadlock between rescan worker and remove qgroupSidong Yang
The commit e804861bd4e6 ("btrfs: fix deadlock between quota disable and qgroup rescan worker") by Kawasaki resolves deadlock between quota disable and qgroup rescan worker. But also there is a deadlock case like it. It's about enabling or disabling quota and creating or removing qgroup. It can be reproduced in simple script below. for i in {1..100} do btrfs quota enable /mnt & btrfs qgroup create 1/0 /mnt & btrfs qgroup destroy 1/0 /mnt & btrfs quota disable /mnt & done Here's why the deadlock happens: 1) The quota rescan task is running. 2) Task A calls btrfs_quota_disable(), locks the qgroup_ioctl_lock mutex, and then calls btrfs_qgroup_wait_for_completion(), to wait for the quota rescan task to complete. 3) Task B calls btrfs_remove_qgroup() and it blocks when trying to lock the qgroup_ioctl_lock mutex, because it's being held by task A. At that point task B is holding a transaction handle for the current transaction. 4) The quota rescan task calls btrfs_commit_transaction(). This results in it waiting for all other tasks to release their handles on the transaction, but task B is blocked on the qgroup_ioctl_lock mutex while holding a handle on the transaction, and that mutex is being held by task A, which is waiting for the quota rescan task to complete, resulting in a deadlock between these 3 tasks. To resolve this issue, the thread disabling quota should unlock qgroup_ioctl_lock before waiting rescan completion. Move btrfs_qgroup_wait_for_completion() after unlock of qgroup_ioctl_lock. Fixes: e804861bd4e6 ("btrfs: fix deadlock between quota disable and qgroup rescan worker") CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Sidong Yang <realwakka@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-03-02btrfs: fix relocation crash due to premature return from ↵Omar Sandoval
btrfs_commit_transaction() We are seeing crashes similar to the following trace: [38.969182] WARNING: CPU: 20 PID: 2105 at fs/btrfs/relocation.c:4070 btrfs_relocate_block_group+0x2dc/0x340 [btrfs] [38.973556] CPU: 20 PID: 2105 Comm: btrfs Not tainted 5.17.0-rc4 #54 [38.974580] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [38.976539] RIP: 0010:btrfs_relocate_block_group+0x2dc/0x340 [btrfs] [38.980336] RSP: 0000:ffffb0dd42e03c20 EFLAGS: 00010206 [38.981218] RAX: ffff96cfc4ede800 RBX: ffff96cfc3ce0000 RCX: 000000000002ca14 [38.982560] RDX: 0000000000000000 RSI: 4cfd109a0bcb5d7f RDI: ffff96cfc3ce0360 [38.983619] RBP: ffff96cfc309c000 R08: 0000000000000000 R09: 0000000000000000 [38.984678] R10: ffff96cec0000001 R11: ffffe84c80000000 R12: ffff96cfc4ede800 [38.985735] R13: 0000000000000000 R14: 0000000000000000 R15: ffff96cfc3ce0360 [38.987146] FS: 00007f11c15218c0(0000) GS:ffff96d6dfb00000(0000) knlGS:0000000000000000 [38.988662] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [38.989398] CR2: 00007ffc922c8e60 CR3: 00000001147a6001 CR4: 0000000000370ee0 [38.990279] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [38.991219] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [38.992528] Call Trace: [38.992854] <TASK> [38.993148] btrfs_relocate_chunk+0x27/0xe0 [btrfs] [38.993941] btrfs_balance+0x78e/0xea0 [btrfs] [38.994801] ? vsnprintf+0x33c/0x520 [38.995368] ? __kmalloc_track_caller+0x351/0x440 [38.996198] btrfs_ioctl_balance+0x2b9/0x3a0 [btrfs] [38.997084] btrfs_ioctl+0x11b0/0x2da0 [btrfs] [38.997867] ? mod_objcg_state+0xee/0x340 [38.998552] ? seq_release+0x24/0x30 [38.999184] ? proc_nr_files+0x30/0x30 [38.999654] ? call_rcu+0xc8/0x2f0 [39.000228] ? __x64_sys_ioctl+0x84/0xc0 [39.000872] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [39.001973] __x64_sys_ioctl+0x84/0xc0 [39.002566] do_syscall_64+0x3a/0x80 [39.003011] entry_SYSCALL_64_after_hwframe+0x44/0xae [39.003735] RIP: 0033:0x7f11c166959b [39.007324] RSP: 002b:00007fff2543e998 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [39.008521] RAX: ffffffffffffffda RBX: 00007f11c1521698 RCX: 00007f11c166959b [39.009833] RDX: 00007fff2543ea40 RSI: 00000000c4009420 RDI: 0000000000000003 [39.011270] RBP: 0000000000000003 R08: 0000000000000013 R09: 00007f11c16f94e0 [39.012581] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff25440df3 [39.014046] R13: 0000000000000000 R14: 00007fff2543ea40 R15: 0000000000000001 [39.015040] </TASK> [39.015418] ---[ end trace 0000000000000000 ]--- [43.131559] ------------[ cut here ]------------ [43.132234] kernel BUG at fs/btrfs/extent-tree.c:2717! [43.133031] invalid opcode: 0000 [#1] PREEMPT SMP PTI [43.133702] CPU: 1 PID: 1839 Comm: btrfs Tainted: G W 5.17.0-rc4 #54 [43.134863] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [43.136426] RIP: 0010:unpin_extent_range+0x37a/0x4f0 [btrfs] [43.139913] RSP: 0000:ffffb0dd4216bc70 EFLAGS: 00010246 [43.140629] RAX: 0000000000000000 RBX: ffff96cfc34490f8 RCX: 0000000000000001 [43.141604] RDX: 0000000080000001 RSI: 0000000051d00000 RDI: 00000000ffffffff [43.142645] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff96cfd07dca50 [43.143669] R10: ffff96cfc46e8a00 R11: fffffffffffec000 R12: 0000000041d00000 [43.144657] R13: ffff96cfc3ce0000 R14: ffffb0dd4216bd08 R15: 0000000000000000 [43.145686] FS: 00007f7657dd68c0(0000) GS:ffff96d6df640000(0000) knlGS:0000000000000000 [43.146808] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [43.147584] CR2: 00007f7fe81bf5b0 CR3: 00000001093ee004 CR4: 0000000000370ee0 [43.148589] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [43.149581] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [43.150559] Call Trace: [43.150904] <TASK> [43.151253] btrfs_finish_extent_commit+0x88/0x290 [btrfs] [43.152127] btrfs_commit_transaction+0x74f/0xaa0 [btrfs] [43.152932] ? btrfs_attach_transaction_barrier+0x1e/0x50 [btrfs] [43.153786] btrfs_ioctl+0x1edc/0x2da0 [btrfs] [43.154475] ? __check_object_size+0x150/0x170 [43.155170] ? preempt_count_add+0x49/0xa0 [43.155753] ? __x64_sys_ioctl+0x84/0xc0 [43.156437] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [43.157456] __x64_sys_ioctl+0x84/0xc0 [43.157980] do_syscall_64+0x3a/0x80 [43.158543] entry_SYSCALL_64_after_hwframe+0x44/0xae [43.159231] RIP: 0033:0x7f7657f1e59b [43.161819] RSP: 002b:00007ffda5cd1658 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [43.162702] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f7657f1e59b [43.163526] RDX: 0000000000000000 RSI: 0000000000009408 RDI: 0000000000000003 [43.164358] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 [43.165208] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [43.166029] R13: 00005621b91c3232 R14: 00005621b91ba580 R15: 00007ffda5cd1800 [43.166863] </TASK> [43.167125] Modules linked in: btrfs blake2b_generic xor pata_acpi ata_piix libata raid6_pq scsi_mod libcrc32c virtio_net virtio_rng net_failover rng_core failover scsi_common [43.169552] ---[ end trace 0000000000000000 ]--- [43.171226] RIP: 0010:unpin_extent_range+0x37a/0x4f0 [btrfs] [43.174767] RSP: 0000:ffffb0dd4216bc70 EFLAGS: 00010246 [43.175600] RAX: 0000000000000000 RBX: ffff96cfc34490f8 RCX: 0000000000000001 [43.176468] RDX: 0000000080000001 RSI: 0000000051d00000 RDI: 00000000ffffffff [43.177357] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff96cfd07dca50 [43.178271] R10: ffff96cfc46e8a00 R11: fffffffffffec000 R12: 0000000041d00000 [43.179178] R13: ffff96cfc3ce0000 R14: ffffb0dd4216bd08 R15: 0000000000000000 [43.180071] FS: 00007f7657dd68c0(0000) GS:ffff96d6df800000(0000) knlGS:0000000000000000 [43.181073] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [43.181808] CR2: 00007fe09905f010 CR3: 00000001093ee004 CR4: 0000000000370ee0 [43.182706] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [43.183591] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 We first hit the WARN_ON(rc->block_group->pinned > 0) in btrfs_relocate_block_group() and then the BUG_ON(!cache) in unpin_extent_range(). This tells us that we are exiting relocation and removing the block group with bytes still pinned for that block group. This is supposed to be impossible: the last thing relocate_block_group() does is commit the transaction to get rid of pinned extents. Commit d0c2f4fa555e ("btrfs: make concurrent fsyncs wait less when waiting for a transaction commit") introduced an optimization so that commits from fsync don't have to wait for the previous commit to unpin extents. This was only intended to affect fsync, but it inadvertently made it possible for any commit to skip waiting for the previous commit to unpin. This is because if a call to btrfs_commit_transaction() finds that another thread is already committing the transaction, it waits for the other thread to complete the commit and then returns. If that other thread was in fsync, then it completes the commit without completing the previous commit. This makes the following sequence of events possible: Thread 1____________________|Thread 2 (fsync)_____________________|Thread 3 (balance)___________________ btrfs_commit_transaction(N) | | btrfs_run_delayed_refs | | pin extents | | ... | | state = UNBLOCKED |btrfs_sync_file | | btrfs_start_transaction(N + 1) |relocate_block_group | | btrfs_join_transaction(N + 1) | btrfs_commit_transaction(N + 1) | ... | trans->state = COMMIT_START | | | btrfs_commit_transaction(N + 1) | | wait_for_commit(N + 1, COMPLETED) | wait_for_commit(N, SUPER_COMMITTED)| state = SUPER_COMMITTED | ... | btrfs_finish_extent_commit| | unpin_extent_range() | trans->state = COMPLETED | | | return | | ... | |Thread 1 isn't done, so pinned > 0 | |and we WARN | | | |btrfs_remove_block_group unpin_extent_range() | | Thread 3 removed the | | block group, so we BUG| | There are other sequences involving SUPER_COMMITTED transactions that can cause a similar outcome. We could fix this by making relocation explicitly wait for unpinning, but there may be other cases that need it. Josef mentioned ENOSPC flushing and the free space cache inode as other potential victims. Rather than playing whack-a-mole, this fix is conservative and makes all commits not in fsync wait for all previous transactions, which is what the optimization intended. Fixes: d0c2f4fa555e ("btrfs: make concurrent fsyncs wait less when waiting for a transaction commit") CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-03-02btrfs: do not start relocation until in progress drops are doneJosef Bacik
We hit a bug with a recovering relocation on mount for one of our file systems in production. I reproduced this locally by injecting errors into snapshot delete with balance running at the same time. This presented as an error while looking up an extent item WARNING: CPU: 5 PID: 1501 at fs/btrfs/extent-tree.c:866 lookup_inline_extent_backref+0x647/0x680 CPU: 5 PID: 1501 Comm: btrfs-balance Not tainted 5.16.0-rc8+ #8 RIP: 0010:lookup_inline_extent_backref+0x647/0x680 RSP: 0018:ffffae0a023ab960 EFLAGS: 00010202 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 000000000000000c RDI: 0000000000000000 RBP: ffff943fd2a39b60 R08: 0000000000000000 R09: 0000000000000001 R10: 0001434088152de0 R11: 0000000000000000 R12: 0000000001d05000 R13: ffff943fd2a39b60 R14: ffff943fdb96f2a0 R15: ffff9442fc923000 FS: 0000000000000000(0000) GS:ffff944e9eb40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1157b1fca8 CR3: 000000010f092000 CR4: 0000000000350ee0 Call Trace: <TASK> insert_inline_extent_backref+0x46/0xd0 __btrfs_inc_extent_ref.isra.0+0x5f/0x200 ? btrfs_merge_delayed_refs+0x164/0x190 __btrfs_run_delayed_refs+0x561/0xfa0 ? btrfs_search_slot+0x7b4/0xb30 ? btrfs_update_root+0x1a9/0x2c0 btrfs_run_delayed_refs+0x73/0x1f0 ? btrfs_update_root+0x1a9/0x2c0 btrfs_commit_transaction+0x50/0xa50 ? btrfs_update_reloc_root+0x122/0x220 prepare_to_merge+0x29f/0x320 relocate_block_group+0x2b8/0x550 btrfs_relocate_block_group+0x1a6/0x350 btrfs_relocate_chunk+0x27/0xe0 btrfs_balance+0x777/0xe60 balance_kthread+0x35/0x50 ? btrfs_balance+0xe60/0xe60 kthread+0x16b/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x22/0x30 </TASK> Normally snapshot deletion and relocation are excluded from running at the same time by the fs_info->cleaner_mutex. However if we had a pending balance waiting to get the ->cleaner_mutex, and a snapshot deletion was running, and then the box crashed, we would come up in a state where we have a half deleted snapshot. Again, in the normal case the snapshot deletion needs to complete before relocation can start, but in this case relocation could very well start before the snapshot deletion completes, as we simply add the root to the dead roots list and wait for the next time the cleaner runs to clean up the snapshot. Fix this by setting a bit on the fs_info if we have any DEAD_ROOT's that had a pending drop_progress key. If they do then we know we were in the middle of the drop operation and set a flag on the fs_info. Then balance can wait until this flag is cleared to start up again. If there are DEAD_ROOT's that don't have a drop_progress set then we're safe to start balance right away as we'll be properly protected by the cleaner_mutex. CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-03-02btrfs: tree-checker: use u64 for item data end to avoid overflowSu Yue
User reported there is an array-index-out-of-bounds access while mounting the crafted image: [350.411942 ] loop0: detected capacity change from 0 to 262144 [350.427058 ] BTRFS: device fsid a62e00e8-e94e-4200-8217-12444de93c2e devid 1 transid 8 /dev/loop0 scanned by systemd-udevd (1044) [350.428564 ] BTRFS info (device loop0): disk space caching is enabled [350.428568 ] BTRFS info (device loop0): has skinny extents [350.429589 ] [350.429619 ] UBSAN: array-index-out-of-bounds in fs/btrfs/struct-funcs.c:161:1 [350.429636 ] index 1048096 is out of range for type 'page *[16]' [350.429650 ] CPU: 0 PID: 9 Comm: kworker/u8:1 Not tainted 5.16.0-rc4 [350.429652 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 [350.429653 ] Workqueue: btrfs-endio-meta btrfs_work_helper [btrfs] [350.429772 ] Call Trace: [350.429774 ] <TASK> [350.429776 ] dump_stack_lvl+0x47/0x5c [350.429780 ] ubsan_epilogue+0x5/0x50 [350.429786 ] __ubsan_handle_out_of_bounds+0x66/0x70 [350.429791 ] btrfs_get_16+0xfd/0x120 [btrfs] [350.429832 ] check_leaf+0x754/0x1a40 [btrfs] [350.429874 ] ? filemap_read+0x34a/0x390 [350.429878 ] ? load_balance+0x175/0xfc0 [350.429881 ] validate_extent_buffer+0x244/0x310 [btrfs] [350.429911 ] btrfs_validate_metadata_buffer+0xf8/0x100 [btrfs] [350.429935 ] end_bio_extent_readpage+0x3af/0x850 [btrfs] [350.429969 ] ? newidle_balance+0x259/0x480 [350.429972 ] end_workqueue_fn+0x29/0x40 [btrfs] [350.429995 ] btrfs_work_helper+0x71/0x330 [btrfs] [350.430030 ] ? __schedule+0x2fb/0xa40 [350.430033 ] process_one_work+0x1f6/0x400 [350.430035 ] ? process_one_work+0x400/0x400 [350.430036 ] worker_thread+0x2d/0x3d0 [350.430037 ] ? process_one_work+0x400/0x400 [350.430038 ] kthread+0x165/0x190 [350.430041 ] ? set_kthread_struct+0x40/0x40 [350.430043 ] ret_from_fork+0x1f/0x30 [350.430047 ] </TASK> [350.430047 ] [350.430077 ] BTRFS warning (device loop0): bad eb member start: ptr 0xffe20f4e start 20975616 member offset 4293005178 size 2 btrfs check reports: corrupt leaf: root=3 block=20975616 physical=20975616 slot=1, unexpected item end, have 4294971193 expect 3897 The first slot item offset is 4293005033 and the size is 1966160. In check_leaf, we use btrfs_item_end() to check item boundary versus extent_buffer data size. However, return type of btrfs_item_end() is u32. (u32)(4293005033 + 1966160) == 3897, overflow happens and the result 3897 equals to leaf data size reasonably. Fix it by use u64 variable to store item data end in check_leaf() to avoid u32 overflow. This commit does solve the invalid memory access showed by the stack trace. However, its metadata profile is DUP and another copy of the leaf is fine. So the image can be mounted successfully. But when umount is called, the ASSERT btrfs_mark_buffer_dirty() will be triggered because the only node in extent tree has 0 item and invalid owner. It's solved by another commit "btrfs: check extent buffer owner against the owner rootid". Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215299 Reported-by: Wenqing Liu <wenqingliu0120@gmail.com> CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Su Yue <l@damenly.su> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-03-02btrfs: do not WARN_ON() if we have PageError setJosef Bacik
Whenever we do any extent buffer operations we call assert_eb_page_uptodate() to complain loudly if we're operating on an non-uptodate page. Our overnight tests caught this warning earlier this week WARNING: CPU: 1 PID: 553508 at fs/btrfs/extent_io.c:6849 assert_eb_page_uptodate+0x3f/0x50 CPU: 1 PID: 553508 Comm: kworker/u4:13 Tainted: G W 5.17.0-rc3+ #564 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Workqueue: btrfs-cache btrfs_work_helper RIP: 0010:assert_eb_page_uptodate+0x3f/0x50 RSP: 0018:ffffa961440a7c68 EFLAGS: 00010246 RAX: 0017ffffc0002112 RBX: ffffe6e74453f9c0 RCX: 0000000000001000 RDX: ffffe6e74467c887 RSI: ffffe6e74453f9c0 RDI: ffff8d4c5efc2fc0 RBP: 0000000000000d56 R08: ffff8d4d4a224000 R09: 0000000000000000 R10: 00015817fa9d1ef0 R11: 000000000000000c R12: 00000000000007b1 R13: ffff8d4c5efc2fc0 R14: 0000000001500000 R15: 0000000001cb1000 FS: 0000000000000000(0000) GS:ffff8d4dbbd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ff31d3448d8 CR3: 0000000118be8004 CR4: 0000000000370ee0 Call Trace: extent_buffer_test_bit+0x3f/0x70 free_space_test_bit+0xa6/0xc0 load_free_space_tree+0x1f6/0x470 caching_thread+0x454/0x630 ? rcu_read_lock_sched_held+0x12/0x60 ? rcu_read_lock_sched_held+0x12/0x60 ? rcu_read_lock_sched_held+0x12/0x60 ? lock_release+0x1f0/0x2d0 btrfs_work_helper+0xf2/0x3e0 ? lock_release+0x1f0/0x2d0 ? finish_task_switch.isra.0+0xf9/0x3a0 process_one_work+0x26d/0x580 ? process_one_work+0x580/0x580 worker_thread+0x55/0x3b0 ? process_one_work+0x580/0x580 kthread+0xf0/0x120 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 This was partially fixed by c2e39305299f01 ("btrfs: clear extent buffer uptodate when we fail to write it"), however all that fix did was keep us from finding extent buffers after a failed writeout. It didn't keep us from continuing to use a buffer that we already had found. In this case we're searching the commit root to cache the block group, so we can start committing the transaction and switch the commit root and then start writing. After the switch we can look up an extent buffer that hasn't been written yet and start processing that block group. Then we fail to write that block out and clear Uptodate on the page, and then we start spewing these errors. Normally we're protected by the tree lock to a certain degree here. If we read a block we have that block read locked, and we block the writer from locking the block before we submit it for the write. However this isn't necessarily fool proof because the read could happen before we do the submit_bio and after we locked and unlocked the extent buffer. Also in this particular case we have path->skip_locking set, so that won't save us here. We'll simply get a block that was valid when we read it, but became invalid while we were using it. What we really want is to catch the case where we've "read" a block but it's not marked Uptodate. On read we ClearPageError(), so if we're !Uptodate and !Error we know we didn't do the right thing for reading the page. Fix this by checking !Uptodate && !Error, this way we will not complain if our buffer gets invalidated while we're using it, and we'll maintain the spirit of the check which is to make sure we have a fully in-cache block while we're messing with it. CC: stable@vger.kernel.org # 5.4+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-03-02btrfs: fix lost prealloc extents beyond eof after full fsyncFilipe Manana
When doing a full fsync, if we have prealloc extents beyond (or at) eof, and the leaves that contain them were not modified in the current transaction, we end up not logging them. This results in losing those extents when we replay the log after a power failure, since the inode is truncated to the current value of the logged i_size. Just like for the fast fsync path, we need to always log all prealloc extents starting at or beyond i_size. The fast fsync case was fixed in commit 471d557afed155 ("Btrfs: fix loss of prealloc extents past i_size after fsync log replay") but it missed the full fsync path. The problem exists since the very early days, when the log tree was added by commit e02119d5a7b439 ("Btrfs: Add a write ahead tree log to optimize synchronous operations"). Example reproducer: $ mkfs.btrfs -f /dev/sdc $ mount /dev/sdc /mnt # Create our test file with many file extent items, so that they span # several leaves of metadata, even if the node/page size is 64K. Use # direct IO and not fsync/O_SYNC because it's both faster and it avoids # clearing the full sync flag from the inode - we want the fsync below # to trigger the slow full sync code path. $ xfs_io -f -d -c "pwrite -b 4K 0 16M" /mnt/foo # Now add two preallocated extents to our file without extending the # file's size. One right at i_size, and another further beyond, leaving # a gap between the two prealloc extents. $ xfs_io -c "falloc -k 16M 1M" /mnt/foo $ xfs_io -c "falloc -k 20M 1M" /mnt/foo # Make sure everything is durably persisted and the transaction is # committed. This makes all created extents to have a generation lower # than the generation of the transaction used by the next write and # fsync. sync # Now overwrite only the first extent, which will result in modifying # only the first leaf of metadata for our inode. Then fsync it. This # fsync will use the slow code path (inode full sync bit is set) because # it's the first fsync since the inode was created/loaded. $ xfs_io -c "pwrite 0 4K" -c "fsync" /mnt/foo # Extent list before power failure. $ xfs_io -c "fiemap -v" /mnt/foo /mnt/foo: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..7]: 2178048..2178055 8 0x0 1: [8..16383]: 26632..43007 16376 0x0 2: [16384..32767]: 2156544..2172927 16384 0x0 3: [32768..34815]: 2172928..2174975 2048 0x800 4: [34816..40959]: hole 6144 5: [40960..43007]: 2174976..2177023 2048 0x801 <power fail> # Mount fs again, trigger log replay. $ mount /dev/sdc /mnt # Extent list after power failure and log replay. $ xfs_io -c "fiemap -v" /mnt/foo /mnt/foo: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..7]: 2178048..2178055 8 0x0 1: [8..16383]: 26632..43007 16376 0x0 2: [16384..32767]: 2156544..2172927 16384 0x1 # The prealloc extents at file offsets 16M and 20M are missing. So fix this by calling btrfs_log_prealloc_extents() when we are doing a full fsync, so that we always log all prealloc extents beyond eof. A test case for fstests will follow soon. CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-03-02btrfs: subpage: fix a wrong check on subpage->writersQu Wenruo
[BUG] When looping btrfs/074 with 64K page size and 4K sectorsize, there is a low chance (1/50~1/100) to crash with the following ASSERT() triggered in btrfs_subpage_start_writer(): ret = atomic_add_return(nbits, &subpage->writers); ASSERT(ret == nbits); <<< This one <<< [CAUSE] With more debugging output on the parameters of btrfs_subpage_start_writer(), it shows a very concerning error: ret=29 nbits=13 start=393216 len=53248 For @nbits it's correct, but @ret which is the returned value from atomic_add_return(), it's not only larger than nbits, but also larger than max sectors per page value (for 64K page size and 4K sector size, it's 16). This indicates that some call sites are not properly decreasing the value. And that's exactly the case, in btrfs_page_unlock_writer(), due to the fact that we can have page locked either by lock_page() or process_one_page(), we have to check if the subpage has any writer. If no writers, it's locked by lock_page() and we only need to unlock it. But unfortunately the check for the writers are completely opposite: if (atomic_read(&subpage->writers)) /* No writers, locked by plain lock_page() */ return unlock_page(page); We directly unlock the page if it has writers, which is the completely opposite what we want. Thankfully the affected call site is only limited to extent_write_locked_range(), so it's mostly affecting compressed write. [FIX] Just fix the wrong check condition to fix the bug. Fixes: e55a0de18572 ("btrfs: rework page locking in __extent_writepage()") CC: stable@vger.kernel.org # 5.16 Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-03-02erofs: fix ztailpacking on > 4GiB filesystemsGao Xiang
z_idataoff here is an absolute physical offset, so it should use erofs_off_t (64 bits at least). Otherwise, it'll get trimmed and cause the decompresion failure. Link: https://lore.kernel.org/r/20220222033118.20540-1-hsiangkao@linux.alibaba.com Fixes: ab92184ff8f1 ("erofs: add on-disk compressed tail-packing inline support") Reviewed-by: Yue Hu <huyue2@yulong.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2022-03-02ALSA: intel_hdmi: Fix reference to PCM buffer addressZhen Ni
PCM buffers might be allocated dynamically when the buffer preallocation failed or a larger buffer is requested, and it's not guaranteed that substream->dma_buffer points to the actually used buffer. The driver needs to refer to substream->runtime->dma_addr instead for the buffer address. Signed-off-by: Zhen Ni <nizhen@uniontech.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220302074241.30469-1-nizhen@uniontech.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-03-02batman-adv: Don't expect inter-netns unique iflink indicesSven Eckelmann
The ifindex doesn't have to be unique for multiple network namespaces on the same machine. $ ip netns add test1 $ ip -net test1 link add dummy1 type dummy $ ip netns add test2 $ ip -net test2 link add dummy2 type dummy $ ip -net test1 link show dev dummy1 6: dummy1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 96:81:55:1e:dd:85 brd ff:ff:ff:ff:ff:ff $ ip -net test2 link show dev dummy2 6: dummy2: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 5a:3c:af:35:07:c3 brd ff:ff:ff:ff:ff:ff But the batman-adv code to walk through the various layers of virtual interfaces uses this assumption because dev_get_iflink handles it internally and doesn't return the actual netns of the iflink. And dev_get_iflink only documents the situation where ifindex == iflink for physical devices. But only checking for dev->netdev_ops->ndo_get_iflink is also not an option because ipoib_get_iflink implements it even when it sometimes returns an iflink != ifindex and sometimes iflink == ifindex. The caller must therefore make sure itself to check both netns and iflink + ifindex for equality. Only when they are equal, a "physical" interface was detected which should stop the traversal. On the other hand, vxcan_get_iflink can also return 0 in case there was currently no valid peer. In this case, it is still necessary to stop. Fixes: b7eddd0b3950 ("batman-adv: prevent using any virtual device created on batman-adv as hard-interface") Fixes: 5ed4a460a1d3 ("batman-adv: additional checks for virtual interfaces on top of WiFi") Reported-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2022-03-02batman-adv: Request iflink once in batadv_get_real_netdeviceSven Eckelmann
There is no need to call dev_get_iflink multiple times for the same net_device in batadv_get_real_netdevice. And since some of the ndo_get_iflink callbacks are dynamic (for example via RCUs like in vxcan_get_iflink), it could easily happen that the returned values are not stable. The pre-checks before __dev_get_by_index are then of course bogus. Fixes: 5ed4a460a1d3 ("batman-adv: additional checks for virtual interfaces on top of WiFi") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2022-03-02batman-adv: Request iflink once in batadv-on-batadv checkSven Eckelmann
There is no need to call dev_get_iflink multiple times for the same net_device in batadv_is_on_batman_iface. And since some of the .ndo_get_iflink callbacks are dynamic (for example via RCUs like in vxcan_get_iflink), it could easily happen that the returned values are not stable. The pre-checks before __dev_get_by_index are then of course bogus. Fixes: b7eddd0b3950 ("batman-adv: prevent using any virtual device created on batman-adv as hard-interface") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2022-03-01Input: elan_i2c - fix regulator enable count imbalance after suspend/resumeHans de Goede
Before these changes elan_suspend() would only disable the regulator when device_may_wakeup() returns false; whereas elan_resume() would unconditionally enable it, leading to an enable count imbalance when device_may_wakeup() returns true. This triggers the "WARN_ON(regulator->enable_count)" in regulator_put() when the elan_i2c driver gets unbound, this happens e.g. with the hot-plugable dock with Elan I2C touchpad for the Asus TF103C 2-in-1. Fix this by making the regulator_enable() call also be conditional on device_may_wakeup() returning false. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220131135436.29638-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-03-01Input: elan_i2c - move regulator_[en|dis]able() out of elan_[en|dis]able_power()Hans de Goede
elan_disable_power() is called conditionally on suspend, where as elan_enable_power() is always called on resume. This leads to an imbalance in the regulator's enable count. Move the regulator_[en|dis]able() calls out of elan_[en|dis]able_power() in preparation of fixing this. No functional changes intended. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220131135436.29638-1-hdegoede@redhat.com [dtor: consolidate elan_[en|dis]able() into elan_set_power()] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-03-01tracing/histogram: Fix sorting on old "cpu" valueSteven Rostedt (Google)
When trying to add a histogram against an event with the "cpu" field, it was impossible due to "cpu" being a keyword to key off of the running CPU. So to fix this, it was changed to "common_cpu" to match the other generic fields (like "common_pid"). But since some scripts used "cpu" for keying off of the CPU (for events that did not have "cpu" as a field, which is most of them), a backward compatibility trick was added such that if "cpu" was used as a key, and the event did not have "cpu" as a field name, then it would fallback and switch over to "common_cpu". This fix has a couple of subtle bugs. One was that when switching over to "common_cpu", it did not change the field name, it just set a flag. But the code still found a "cpu" field. The "cpu" field is used for filtering and is returned when the event does not have a "cpu" field. This was found by: # cd /sys/kernel/tracing # echo hist:key=cpu,pid:sort=cpu > events/sched/sched_wakeup/trigger # cat events/sched/sched_wakeup/hist Which showed the histogram unsorted: { cpu: 19, pid: 1175 } hitcount: 1 { cpu: 6, pid: 239 } hitcount: 2 { cpu: 23, pid: 1186 } hitcount: 14 { cpu: 12, pid: 249 } hitcount: 2 { cpu: 3, pid: 994 } hitcount: 5 Instead of hard coding the "cpu" checks, take advantage of the fact that trace_event_field_field() returns a special field for "cpu" and "CPU" if the event does not have "cpu" as a field. This special field has the "filter_type" of "FILTER_CPU". Check that to test if the returned field is of the CPU type instead of doing the string compare. Also, fix the sorting bug by testing for the hist_field flag of HIST_FIELD_FL_CPU when setting up the sort routine. Otherwise it will use the special CPU field to know what compare routine to use, and since that special field does not have a size, it returns tracing_map_cmp_none. Cc: stable@vger.kernel.org Fixes: 1e3bac71c505 ("tracing/histogram: Rename "cpu" to "common_cpu"") Reported-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-03-01net: dsa: restore error path of dsa_tree_change_tag_protoVladimir Oltean
When the DSA_NOTIFIER_TAG_PROTO returns an error, the user space process which initiated the protocol change exits the kernel processing while still holding the rtnl_mutex. So any other process attempting to lock the rtnl_mutex would deadlock after such event. The error handling of DSA_NOTIFIER_TAG_PROTO was inadvertently changed by the blamed commit, introducing this regression. We must still call rtnl_unlock(), and we must still call DSA_NOTIFIER_TAG_PROTO for the old protocol. The latter is due to the limiting design of notifier chains for cross-chip operations, which don't have a built-in error recovery mechanism - we should look into using notifier_call_chain_robust for that. Fixes: dc452a471dba ("net: dsa: introduce tagger-owned storage for private and shared data") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220228141715.146485-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-01Merge tag 'for-net-2022-03-01' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix regression with scanning not working in some systems. * tag 'for-net-2022-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: Fix not checking MGMT cmd pending queue ==================== Link: https://lore.kernel.org/r/20220302004330.125536-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-01Bluetooth: Fix not checking MGMT cmd pending queueBrian Gix
A number of places in the MGMT handlers we examine the command queue for other commands (in progress but not yet complete) that will interact with the process being performed. However, not all commands go into the queue if one of: 1. There is no negative side effect of consecutive or redundent commands 2. The command is entirely perform "inline". This change examines each "pending command" check, and if it is not needed, deletes the check. Of the remaining pending command checks, we make sure that the command is in the pending queue by using the mgmt_pending_add/mgmt_pending_remove pair rather than the mgmt_pending_new/mgmt_pending_free pair. Link: https://lore.kernel.org/linux-bluetooth/f648f2e11bb3c2974c32e605a85ac3a9fac944f1.camel@redhat.com/T/ Tested-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-03-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Use kfree_rcu(ptr, rcu) variant, using kfree_rcu(ptr) was not intentional. From Eric Dumazet. 2) Use-after-free in netfilter hook core, from Eric Dumazet. 3) Missing rcu read lock side for netfilter egress hook, from Florian Westphal. 4) nf_queue assume state->sk is full socket while it might not be. Invoke sock_gen_put(), from Florian Westphal. 5) Add selftest to exercise the reported KASAN splat in 4) 6) Fix possible use-after-free in nf_queue in case sk_refcnt is 0. Also from Florian. 7) Use input interface index only for hardware offload, not for the software plane. This breaks tc ct action. Patch from Paul Blakey. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: net/sched: act_ct: Fix flow table lookup failure with no originating ifindex netfilter: nf_queue: handle socket prefetch netfilter: nf_queue: fix possible use-after-free selftests: netfilter: add nfqueue TCP_NEW_SYN_RECV socket race test netfilter: nf_queue: don't assume sk is full socket netfilter: egress: silence egress hook lockdep splats netfilter: fix use-after-free in __nf_register_net_hook() netfilter: nf_tables: prefer kfree_rcu(ptr, rcu) variant ==================== Link: https://lore.kernel.org/r/20220301215337.378405-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-01net/sched: act_ct: Fix flow table lookup failure with no originating ifindexPaul Blakey
After cited commit optimizted hw insertion, flow table entries are populated with ifindex information which was intended to only be used for HW offload. This tuple ifindex is hashed in the flow table key, so it must be filled for lookup to be successful. But tuple ifindex is only relevant for the netfilter flowtables (nft), so it's not filled in act_ct flow table lookup, resulting in lookup failure, and no SW offload and no offload teardown for TCP connection FIN/RST packets. To fix this, add new tc ifindex field to tuple, which will only be used for offloading, not for lookup, as it will not be part of the tuple hash. Fixes: 9795ded7f924 ("net/sched: act_ct: Fill offloading tuple iifidx") Signed-off-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-03-01Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "The bigger part of the change is a revert for x86 hosts. Here the second patch was supposed to fix the first, but in reality it was just as broken, so both have to go. x86 host: - Revert incorrect assumption that cr3 changes come with preempt notifier callbacks (they don't when static branches are changed, for example) ARM host: - Correctly synchronise PMR and co on PSCI CPU_SUSPEND - Skip tests that depend on GICv3 when the HW isn't available" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: selftests: aarch64: Skip tests if we can't create a vgic-v3 Revert "KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()" Revert "KVM: VMX: Save HOST_CR3 in vmx_set_host_fs_gs()" KVM: arm64: Don't miss pending interrupts for suspended vCPU
2022-03-01s390/extable: fix exception table sortingHeiko Carstens
s390 has a swap_ex_entry_fixup function, however it is not being used since common code expects a swap_ex_entry_fixup define. If it is not defined the default implementation will be used. So fix this by adding a proper define. However also the implementation of the function must be fixed, since a NULL value for handler has a special meaning and must not be adjusted. Luckily all of this doesn't fix a real bug currently: the main extable is correctly sorted during build time, and for runtime sorting there is currently no case where the handler field is not NULL. Fixes: 05a68e892e89 ("s390/kernel: expand exception table logic to allow new handling options") Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390/ftrace: fix arch_ftrace_get_regs implementationHeiko Carstens
arch_ftrace_get_regs is supposed to return a struct pt_regs pointer only if the pt_regs structure contains all register contents, which means it must have been populated when created via ftrace_regs_caller. If it was populated via ftrace_caller the contents are not complete (the psw mask part is missing), and therefore a NULL pointer needs be returned. The current code incorrectly always returns a struct pt_regs pointer. Fix this by adding another pt_regs flag which indicates if the contents are complete, and fix arch_ftrace_get_regs accordingly. Fixes: 894979689d3a ("s390/ftrace: provide separate ftrace_caller/ftrace_regs_caller implementations") Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reported-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390/ftrace: fix ftrace_caller/ftrace_regs_caller generationHeiko Carstens
ftrace_caller was used for both ftrace_caller and ftrace_regs_caller, which means that the target address of the hotpatch trampoline was never updated. With commit 894979689d3a ("s390/ftrace: provide separate ftrace_caller/ftrace_regs_caller implementations") a separate ftrace_regs_caller entry point was implemeted, however it was forgotten to implement the necessary changes for ftrace_modify_call and ftrace_make_call, where the branch target has to be modified accordingly. Therefore add the missing code now. Fixes: 894979689d3a ("s390/ftrace: provide separate ftrace_caller/ftrace_regs_caller implementations") Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390/setup: preserve memory at OLDMEM_BASE and OLDMEM_SIZEAlexander Egorenkov
We need to preserve the values at OLDMEM_BASE and OLDMEM_SIZE which are used by zgetdump in case when kdump crashes. In that case zgetdump will attempt to read OLDMEM_BASE and OLDMEM_SIZE in order to find out where the memory range [0 - OLDMEM_SIZE] belonging to the production kernel is. Fixes: f1a546947431 ("s390/setup: don't reserve memory that occupied decompressor's head") Cc: stable@vger.kernel.org # 5.15+ Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01drm/vrr: Set VRR capable prop only if it is attached to connectorManasi Navare
VRR capable property is not attached by default to the connector It is attached only if VRR is supported. So if the driver tries to call drm core set prop function without it being attached that causes NULL dereference. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220225013055.9282-1-manasi.d.navare@intel.com
2022-03-01Merge tag 'binfmt_elf-v5.17-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull binfmt_elf fix from Kees Cook: "This addresses a regression[1] under ia64 where some ET_EXEC binaries were not loading" Link: https://linux-regtracking.leemhuis.info/regzbot/regression/a3edd529-c42d-3b09-135c-7e98a15b150f@leemhuis.info/ [1] - Fix ia64 ET_EXEC loading * tag 'binfmt_elf-v5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: binfmt_elf: Avoid total_mapping_size for ET_EXEC
2022-03-01binfmt_elf: Avoid total_mapping_size for ET_EXECKees Cook
Partially revert commit 5f501d555653 ("binfmt_elf: reintroduce using MAP_FIXED_NOREPLACE"), which applied the ET_DYN "total_mapping_size" logic also to ET_EXEC. At least ia64 has ET_EXEC PT_LOAD segments that are not virtual-address contiguous (but _are_ file-offset contiguous). This would result in a giant mapping attempting to cover the entire span, including the virtual address range hole, and well beyond the size of the ELF file itself, causing the kernel to refuse to load it. For example: $ readelf -lW /usr/bin/gcc ... Program Headers: Type Offset VirtAddr PhysAddr FileSiz MemSiz ... ... LOAD 0x000000 0x4000000000000000 0x4000000000000000 0x00b5a0 0x00b5a0 ... LOAD 0x00b5a0 0x600000000000b5a0 0x600000000000b5a0 0x0005ac 0x000710 ... ... ^^^^^^^^ ^^^^^^^^^^^^^^^^^^ ^^^^^^^^ ^^^^^^^^ File offset range : 0x000000-0x00bb4c 0x00bb4c bytes Virtual address range : 0x4000000000000000-0x600000000000bcb0 0x200000000000bcb0 bytes Remove the total_mapping_size logic for ET_EXEC, which reduces the ET_EXEC MAP_FIXED_NOREPLACE coverage to only the first PT_LOAD (better than nothing), and retains it for ET_DYN. Ironically, this is the reverse of the problem that originally caused problems with MAP_FIXED_NOREPLACE: overlapping PT_LOAD segments. Future work could restore full coverage if load_elf_binary() were to perform mappings in a separate phase from the loading (where it could resolve both overlaps and holes). Cc: Eric Biederman <ebiederm@xmission.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-mm@kvack.org Reported-by: matoro <matoro_bugzilla_kernel@matoro.tk> Fixes: 5f501d555653 ("binfmt_elf: reintroduce using MAP_FIXED_NOREPLACE") Link: https://lore.kernel.org/r/a3edd529-c42d-3b09-135c-7e98a15b150f@leemhuis.info Tested-by: matoro <matoro_mailinglist_kernel@matoro.tk> Link: https://lore.kernel.org/lkml/ce8af9c13bcea9230c7689f3c1e0e2cd@matoro.tk Tested-By: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/lkml/49182d0d-708b-4029-da5f-bc18603440a6@physik.fu-berlin.de Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2022-03-01thermal: core: Fix TZ_GET_TRIP NULL pointer dereferenceNicolas Cavallari
Do not call get_trip_hyst() from thermal_genl_cmd_tz_get_trip() if the thermal zone does not define one. Fixes: 1ce50e7d408e ("thermal: core: genetlink support for events/cmd/sampling") Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Cc: 5.10+ <stable@vger.kernel.org> # 5.10+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-01HID: nintendo: check the return value of alloc_workqueue()Jia-Ju Bai
The function alloc_workqueue() in nintendo_hid_probe() can fail, but there is no check of its return value. To fix this bug, its return value should be checked with new error handling code. Fixes: c4eae84feff3e ("HID: nintendo: add rumble support") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Silvan Jegen <s.jegen@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-03-01Merge tag 'wireless-for-net-2022-03-01' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless johannes Berg says: ==================== Some last-minute fixes: * rfkill - add missing rfill_soft_blocked() when disabled * cfg80211 - handle a nla_memdup() failure correctly - fix CONFIG_CFG80211_EXTRA_REGDB_KEYDIR typo in Makefile * mac80211 - fix EAPOL handling in 802.3 RX path - reject setting up aggregation sessions before connection is authorized to avoid timeouts or similar - handle some SAE authentication steps correctly - fix AC selection in mesh forwarding * iwlwifi - remove TWT support as it causes firmware crashes when the AP isn't behaving correctly - check debugfs pointer before dereferncing it ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-01HID: vivaldi: fix sysfs attributes leakDmitry Torokhov
The driver creates the top row map sysfs attribute in input_configured() method; unfortunately we do not have a callback that is executed when HID interface is unbound, thus we are leaking these sysfs attributes, for example when device is disconnected. To fix it let's switch to managed version of adding sysfs attributes which will ensure that they are destroyed when the driver is unbound. Fixes: 14c9c014babe ("HID: add vivaldi HID driver") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Tested-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-03-01cfg80211: fix CONFIG_CFG80211_EXTRA_REGDB_KEYDIR typoJohannes Berg
The kbuild change here accidentally removed not only the unquoting, but also the last character of the variable name. Fix that. Fixes: 129ab0d2d9f3 ("kbuild: do not quote string values in include/config/auto.conf") Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20220221155512.1d25895f7c5f.I50fa3d4189fcab90a2896fe8cae215035dae9508@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-01netfilter: nf_queue: handle socket prefetchFlorian Westphal
In case someone combines bpf socket assign and nf_queue, then we will queue an skb who references a struct sock that did not have its reference count incremented. As we leave rcu protection, there is no guarantee that skb->sk is still valid. For refcount-less skb->sk case, try to increment the reference count and then override the destructor. In case of failure we have two choices: orphan the skb and 'delete' preselect or let nf_queue() drop the packet. Do the latter, it should not happen during normal operation. Fixes: cf7fbe660f2d ("bpf: Add socket assign support") Acked-by: Joe Stringer <joe@cilium.io> Signed-off-by: Florian Westphal <fw@strlen.de>
2022-03-01netfilter: nf_queue: fix possible use-after-freeFlorian Westphal
Eric Dumazet says: The sock_hold() side seems suspect, because there is no guarantee that sk_refcnt is not already 0. On failure, we cannot queue the packet and need to indicate an error. The packet will be dropped by the caller. v2: split skb prefetch hunk into separate change Fixes: 271b72c7fa82c ("udp: RCU handling for Unicast packets.") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de>
2022-03-01selftests: netfilter: add nfqueue TCP_NEW_SYN_RECV socket race testFlorian Westphal
causes: BUG: KASAN: slab-out-of-bounds in sk_free+0x25/0x80 Write of size 4 at addr ffff888106df0284 by task nf-queue/1459 sk_free+0x25/0x80 nf_queue_entry_release_refs+0x143/0x1a0 nf_reinject+0x233/0x770 ... without 'netfilter: nf_queue: don't assume sk is full socket'. Signed-off-by: Florian Westphal <fw@strlen.de>
2022-03-01netfilter: nf_queue: don't assume sk is full socketFlorian Westphal
There is no guarantee that state->sk refers to a full socket. If refcount transitions to 0, sock_put calls sk_free which then ends up with garbage fields. I'd like to thank Oleksandr Natalenko and Jiri Benc for considerable debug work and pointing out state->sk oddities. Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener") Tested-by: Oleksandr Natalenko <oleksandr@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de>
2022-03-01mac80211: treat some SAE auth steps as finalJohannes Berg
When we get anti-clogging token required (added by the commit mentioned below), or the other status codes added by the later commit 4e56cde15f7d ("mac80211: Handle special status codes in SAE commit") we currently just pretend (towards the internal state machine of authentication) that we didn't receive anything. This has the undesirable consequence of retransmitting the prior frame, which is not expected, because the timer is still armed. If we just disarm the timer at that point, it would result in the undesirable side effect of being in this state indefinitely if userspace crashes, or so. So to fix this, reset the timer and set a new auth_data->waiting in order to have no more retransmissions, but to have the data destroyed when the timer actually fires, which will only happen if userspace didn't continue (i.e. crashed or abandoned it.) Fixes: a4055e74a2ff ("mac80211: Don't destroy auth data in case of anti-clogging") Reported-by: Jouni Malinen <j@w1.fi> Link: https://lore.kernel.org/r/20220224103932.75964e1d7932.Ia487f91556f29daae734bf61f8181404642e1eec@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-01nl80211: Handle nla_memdup failures in handle_nan_filterJiasheng Jiang
As there's potential for failure of the nla_memdup(), check the return value. Fixes: a442b761b24b ("cfg80211: add add_nan_func / del_nan_func") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20220301100020.3801187-1-jiasheng@iscas.ac.cn Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-01iwlwifi: mvm: check debugfs_dir ptr before useRandy Dunlap
When "debugfs=off" is used on the kernel command line, iwiwifi's mvm module uses an invalid/unchecked debugfs_dir pointer and causes a BUG: BUG: kernel NULL pointer dereference, address: 000000000000004f #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 1 PID: 503 Comm: modprobe Tainted: G W 5.17.0-rc5 #7 Hardware name: Dell Inc. Inspiron 15 5510/076F7Y, BIOS 2.4.1 11/05/2021 RIP: 0010:iwl_mvm_dbgfs_register+0x692/0x700 [iwlmvm] Code: 69 a0 be 80 01 00 00 48 c7 c7 50 73 6a a0 e8 95 cf ee e0 48 8b 83 b0 1e 00 00 48 c7 c2 54 73 6a a0 be 64 00 00 00 48 8d 7d 8c <48> 8b 48 50 e8 15 22 07 e1 48 8b 43 28 48 8d 55 8c 48 c7 c7 5f 73 RSP: 0018:ffffc90000a0ba68 EFLAGS: 00010246 RAX: ffffffffffffffff RBX: ffff88817d6e3328 RCX: ffff88817d6e3328 RDX: ffffffffa06a7354 RSI: 0000000000000064 RDI: ffffc90000a0ba6c RBP: ffffc90000a0bae0 R08: ffffffff824e4880 R09: ffffffffa069d620 R10: ffffc90000a0ba00 R11: ffffffffffffffff R12: 0000000000000000 R13: ffffc90000a0bb28 R14: ffff88817d6e3328 R15: ffff88817d6e3320 FS: 00007f64dd92d740(0000) GS:ffff88847f640000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000004f CR3: 000000016fc79001 CR4: 0000000000770ee0 PKRU: 55555554 Call Trace: <TASK> ? iwl_mvm_mac_setup_register+0xbdc/0xda0 [iwlmvm] iwl_mvm_start_post_nvm+0x71/0x100 [iwlmvm] iwl_op_mode_mvm_start+0xab8/0xb30 [iwlmvm] _iwl_op_mode_start+0x6f/0xd0 [iwlwifi] iwl_opmode_register+0x6a/0xe0 [iwlwifi] ? 0xffffffffa0231000 iwl_mvm_init+0x35/0x1000 [iwlmvm] ? 0xffffffffa0231000 do_one_initcall+0x5a/0x1b0 ? kmem_cache_alloc+0x1e5/0x2f0 ? do_init_module+0x1e/0x220 do_init_module+0x48/0x220 load_module+0x2602/0x2bc0 ? __kernel_read+0x145/0x2e0 ? kernel_read_file+0x229/0x290 __do_sys_finit_module+0xc5/0x130 ? __do_sys_finit_module+0xc5/0x130 __x64_sys_finit_module+0x13/0x20 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f64dda564dd Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1b 29 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007ffdba393f88 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f64dda564dd RDX: 0000000000000000 RSI: 00005575399e2ab2 RDI: 0000000000000001 RBP: 000055753a91c5e0 R08: 0000000000000000 R09: 0000000000000002 R10: 0000000000000001 R11: 0000000000000246 R12: 00005575399e2ab2 R13: 000055753a91ceb0 R14: 0000000000000000 R15: 000055753a923018 </TASK> Modules linked in: btintel(+) btmtk bluetooth vfat snd_hda_codec_hdmi fat snd_hda_codec_realtek snd_hda_codec_generic iwlmvm(+) snd_sof_pci_intel_tgl mac80211 snd_sof_intel_hda_common soundwire_intel soundwire_generic_allocation soundwire_cadence soundwire_bus snd_sof_intel_hda snd_sof_pci snd_sof snd_sof_xtensa_dsp snd_soc_hdac_hda snd_hda_ext_core snd_soc_acpi_intel_match snd_soc_acpi snd_soc_core btrfs snd_compress snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec raid6_pq iwlwifi snd_hda_core snd_pcm snd_timer snd soundcore cfg80211 intel_ish_ipc(+) thunderbolt rfkill intel_ishtp ucsi_acpi wmi i2c_hid_acpi i2c_hid evdev CR2: 000000000000004f ---[ end trace 0000000000000000 ]--- Check the debugfs_dir pointer for an error before using it. Fixes: 8c082a99edb9 ("iwlwifi: mvm: simplify iwl_mvm_dbgfs_register") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: linux-wireless@vger.kernel.org Cc: Kalle Valo <kvalo@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20220223030630.23241-1-rdunlap@infradead.org [change to make both conditional] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-01iwlwifi: don't advertise TWT supportGolan Ben Ami
Some APs misbehave when TWT is used and cause our firmware to crash. We don't know a reasonable way to detect and work around this problem in the FW yet. To prevent these crashes, disable TWT in the driver by stopping to advertise TWT support. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215523 Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> [reworded the commit message] Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20220301072926.153969-1-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-01rfkill: define rfill_soft_blocked() if !RFKILLBen Dooks
If CONFIG_RFKILL is not set, the Intel WiFi driver will not build the iw_mvm driver part due to the missing rfill_soft_blocked() call. Adding a inline declaration of rfill_soft_blocked() if CONFIG_RFKILL=n fixes the following error: drivers/net/wireless/intel/iwlwifi/mvm/mvm.h: In function 'iwl_mvm_mei_set_sw_rfkill_state': drivers/net/wireless/intel/iwlwifi/mvm/mvm.h:2215:38: error: implicit declaration of function 'rfkill_soft_blocked'; did you mean 'rfkill_blocked'? [-Werror=implicit-function-declaration] 2215 | mvm->hw_registered ? rfkill_soft_blocked(mvm->hw->wiphy->rfkill) : false; | ^~~~~~~~~~~~~~~~~~~ | rfkill_blocked Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Reported-by: Neill Whillans <neill.whillans@codethink.co.uk> Fixes: 5bc9a9dd7535 ("rfkill: allow to get the software rfkill state") Link: https://lore.kernel.org/r/20220218093858.1245677-1-ben.dooks@codethink.co.uk Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-01MIPS: ralink: mt7621: use bitwise NOT instead of logicalIlya Lipnitskiy
It was the intention to reverse the bits, not make them all zero by using logical NOT operator. Fixes: cc19db8b312a ("MIPS: ralink: mt7621: do memory detection on KSEG1") Suggested-by: Chuanhong Guo <gch981213@gmail.com> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-03-01Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-02-28 This series contains updates to igc and e1000e drivers. Corinna Vinschen ensures release of hardware sempahore on failed register read in igc_read_phy_reg_gpy(). Sasha does the same for the write variant, igc_write_phy_reg_gpy(). On e1000e, he resolves an issue with hardware unit hang on s0ix exit by disabling some bits and LAN connected device reset during power management flows. Lastly, he allows for TGP platforms to correct its NVM checksum. v2: Fix Fixes tag on patch 3 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-28Input: goodix - workaround Cherry Trail devices with a bogus ACPI ↵Hans de Goede
Interrupt() resource ACPI/x86 devices with a Cherry Trail SoC should have a GpioInt + a regular GPIO ACPI resource in their ACPI tables. Some CHT devices have a bug, where the also is bogus interrupt resource (likely copied from a previous Bay Trail based generation of the device). The i2c-core-acpi code will assign the bogus, non-working, interrupt resource to client->irq. Add a workaround to fix this up. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2043960 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220228111613.363336-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-02-28Input: goodix - use the new soc_intel_is_byt() helperHans de Goede
Use the new soc_intel_is_byt() helper from linux/platform_data/x86/soc.h. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220131143539.109142-5-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-02-28Merge tag 'v5.17-rc4' into for-linusDmitry Torokhov
Merge with mainline to get the Intel ASoC generic helpers header and other changes.
2022-02-28pinctrl: sunxi: Use unique lockdep classes for IRQsSamuel Holland
This driver, like several others, uses a chained IRQ for each GPIO bank, and forwards .irq_set_wake to the GPIO bank's upstream IRQ. As a result, a call to irq_set_irq_wake() needs to lock both the upstream and downstream irq_desc's. Lockdep considers this to be a possible deadlock when the irq_desc's share lockdep classes, which they do by default: ============================================ WARNING: possible recursive locking detected 5.17.0-rc3-00394-gc849047c2473 #1 Not tainted -------------------------------------------- init/307 is trying to acquire lock: c2dfe27c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0x58/0xa0 but task is already holding lock: c3c0ac7c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0x58/0xa0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by init/307: #0: c1f29f18 (system_transition_mutex){+.+.}-{3:3}, at: __do_sys_reboot+0x90/0x23c #1: c20f7760 (&dev->mutex){....}-{3:3}, at: device_shutdown+0xf4/0x224 #2: c2e804d8 (&dev->mutex){....}-{3:3}, at: device_shutdown+0x104/0x224 #3: c3c0ac7c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0x58/0xa0 stack backtrace: CPU: 0 PID: 307 Comm: init Not tainted 5.17.0-rc3-00394-gc849047c2473 #1 Hardware name: Allwinner sun8i Family unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x68/0x90 dump_stack_lvl from __lock_acquire+0x1680/0x31a0 __lock_acquire from lock_acquire+0x148/0x3dc lock_acquire from _raw_spin_lock_irqsave+0x50/0x6c _raw_spin_lock_irqsave from __irq_get_desc_lock+0x58/0xa0 __irq_get_desc_lock from irq_set_irq_wake+0x2c/0x19c irq_set_irq_wake from irq_set_irq_wake+0x13c/0x19c [tail call from sunxi_pinctrl_irq_set_wake] irq_set_irq_wake from gpio_keys_suspend+0x80/0x1a4 gpio_keys_suspend from gpio_keys_shutdown+0x10/0x2c gpio_keys_shutdown from device_shutdown+0x180/0x224 device_shutdown from __do_sys_reboot+0x134/0x23c __do_sys_reboot from ret_fast_syscall+0x0/0x1c However, this can never deadlock because the upstream and downstream IRQs are never the same (nor do they even involve the same irqchip). Silence this erroneous lockdep splat by applying what appears to be the usual fix of moving the GPIO IRQs to separate lockdep classes. Fixes: a59c99d9eaf9 ("pinctrl: sunxi: Forward calls to irq_set_irq_wake") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220216040037.22730-1-samuel@sholland.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-02-28pinctrl-sunxi: sunxi_pinctrl_gpio_direction_in/output: use correct offsetHans Verkuil
The commit that sets the direction directly without calling pinctrl_gpio_direction(), forgot to add chip->base to the offset when calling sunxi_pmx_gpio_set_direction(). This caused failures for various Allwinner boards which have two GPIO blocks. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: 5kft <5kft@5kft.org> Suggested-by: 5kft <5kft@5kft.org> Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com> Fixes: 8df89a7cbc63 (pinctrl-sunxi: don't call pinctrl_gpio_direction()) Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/0f536cd8-01db-5d16-2cec-ec6d19409a49@xs4all.nl Signed-off-by: Guenter Roeck <linux@roeck-us.net> [Picked from linux-next to pinctrl fixes] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit (git 2.34.1) at 2025-07-16 03:03:48 +0000