summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-03-16net/sched: act_api: add specific EXT_WARN_MSG for tc actionHangbin Liu
In my previous commit 0349b8779cc9 ("sched: add new attr TCA_EXT_WARN_MSG to report tc extact message") I didn't notice the tc action use different enum with filter. So we can't use TCA_EXT_WARN_MSG directly for tc action. Let's add a TCA_ROOT_EXT_WARN_MSG for tc action specifically and put this param before going to the TCA_ACT_TAB nest. Fixes: 0349b8779cc9 ("sched: add new attr TCA_EXT_WARN_MSG to report tc extact message") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-16Revert "net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy"Hangbin Liu
This reverts commit 923b2e30dc9cd05931da0f64e2e23d040865c035. This is not a correct fix as TCA_EXT_WARN_MSG is not a hierarchy to TCA_ACT_TAB. I didn't notice the TC actions use different enum when adding TCA_EXT_WARN_MSG. To fix the difference I will add a new WARN enum in TCA_ROOT_MAX as Jamal suggested. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-16net: dsa: microchip: fix RGMII delay configuration on KSZ8765/KSZ8794/KSZ8795Marek Vasut
The blamed commit has replaced a ksz_write8() call to address REG_PORT_5_CTRL_6 (0x56) with a ksz_set_xmii() -> ksz_pwrite8() call to regs[P_XMII_CTRL_1], which is also defined as 0x56 for ksz8795_regs[]. The trouble is that, when compared to ksz_write8(), ksz_pwrite8() also adjusts the register offset with the port base address. So in reality, ksz_pwrite8(offset=0x56) accesses register 0x56 + 0x50 = 0xa6, which in this switch appears to be unmapped, and the RGMII delay configuration on the CPU port does nothing. So if the switch wasn't fine with the RGMII delay configuration done through pin strapping and relied on Linux to apply a different one in order to pass traffic, this is now broken. Using the offset translation logic imposed by ksz_pwrite8(), the correct value for regs[P_XMII_CTRL_1] should have been 0x6 on ksz8795_regs[], in order to really end up accessing register 0x56. Static code analysis shows that, despite there being multiple other accesses to regs[P_XMII_CTRL_1] in this driver, the only code path that is applicable to ksz8795_regs[] and ksz8_dev_ops is ksz_set_xmii(). Therefore, the problem is isolated to RGMII delays. In its current form, ksz8795_regs[] contains the same value for P_XMII_CTRL_0 and for P_XMII_CTRL_1, and this raises valid suspicions that writes made by the driver to regs[P_XMII_CTRL_0] might overwrite writes made to regs[P_XMII_CTRL_1] or vice versa. Again, static analysis shows that the only accesses to P_XMII_CTRL_0 from the driver are made from code paths which are not reachable with ksz8_dev_ops. So the accesses made by ksz_set_xmii() are safe for this switch family. [ vladimiroltean: rewrote commit message ] Fixes: c476bede4b0f ("net: dsa: microchip: ksz8795: use common xmii function") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230315231916.2998480-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-16Merge branch 'ynl-another-license-adjustment'Jakub Kicinski
Jakub Kicinski says: ==================== ynl: another license adjustment Hopefully the last adjustment to the licensing of the specs. I'm still the author so should be fine to do this. ==================== Link: https://lore.kernel.org/r/20230315230351.478320-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-16ynl: make the tooling check the licenseJakub Kicinski
The (only recently documented) expectation is that all specs are under a certain license, but we don't actually enforce it. What's worse we then go ahead and assume the license was right, outputting the expected license into generated files. Fixes: 37d9df224d1e ("ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause") Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-16ynl: broaden the license even moreJakub Kicinski
I relicensed Netlink spec code to GPL-2.0 OR BSD-3-Clause but we still put a slightly different license on the uAPI header than the rest of the code. Use the Linux-syscall-note on all the specs and all generated code. It's moot for kernel code, but should not hurt. This way the licenses match everywhere. Cc: Chuck Lever <chuck.lever@oracle.com> Fixes: 37d9df224d1e ("ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause") Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-16tools: ynl: make definitions optional againJakub Kicinski
definitions are optional, commit in question breaks cli for ethtool. Fixes: 6517a60b0307 ("tools: ynl: move the enum classes to shared code") Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-16Merge tag 'mlx5-fixes-2023-03-15' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2023-03-15 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2023-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: TC, Remove error message log print net/mlx5e: TC, fix cloned flow attribute net/mlx5e: TC, fix missing error code net/sched: TC, fix raw counter initialization net/mlx5e: Lower maximum allowed MTU in XSK to match XDP prerequisites net/mlx5: Set BREAK_FW_WAIT flag first when removing driver net/mlx5e: kTLS, Fix missing error unwind on unsupported cipher type net/mlx5e: Fix cleanup null-ptr deref on encap lock net/mlx5: E-switch, Fix missing set of split_count when forward to ovs internal port net/mlx5: E-switch, Fix wrong usage of source port rewrite in split rules net/mlx5: Disable eswitch before waiting for VF pages net/mlx5: Fix setting ec_function bit in MANAGE_PAGES net/mlx5e: Don't cache tunnel offloads capability net/mlx5e: Fix macsec ASO context alignment ==================== Link: https://lore.kernel.org/r/20230315225847.360083-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-16hsr: ratelimit only when errors are printedMatthieu Baerts
Recently, when automatically merging -net and net-next in MPTCP devel tree, our CI reported [1] a conflict in hsr, the same as the one reported by Stephen in netdev [2]. When looking at the conflict, I noticed it is in fact the v1 [3] that has been applied in -net and the v2 [4] in net-next. Maybe the v1 was applied by accident. As mentioned by Jakub Kicinski [5], the new condition makes more sense before the net_ratelimit(), not to update net_ratelimit's state which is unnecessary if we're not going to print either way. Here, this modification applies the v2 but in -net. Link: https://github.com/multipath-tcp/mptcp_net-next/actions/runs/4423171069 [1] Link: https://lore.kernel.org/netdev/20230315100914.53fc1760@canb.auug.org.au/ [2] Link: https://lore.kernel.org/netdev/20230307133229.127442-1-koverskeid@gmail.com/ [3] Link: https://lore.kernel.org/netdev/20230309092302.179586-1-koverskeid@gmail.com/ [4] Link: https://lore.kernel.org/netdev/20230308232001.2fb62013@kernel.org/ [5] Fixes: 28e8cabe80f3 ("net: hsr: Don't log netdev_err message on unknown prp dst node") Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Link: https://lore.kernel.org/r/20230315-net-20230315-hsr_framereg-ratelimit-v1-1-61d2ef176d11@tessares.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-16qed/qed_mng_tlv: correctly zero out ->min instead of ->hourDaniil Tatianin
This fixes an issue where ->hour would erroneously get zeroed out instead of ->min because of a bad copy paste. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Fixes: f240b6882211 ("qed: Add support for processing fcoe tlv request.") Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Link: https://lore.kernel.org/r/20230315194618.579286-1-d-tatianin@yandex-team.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-17Merge tag 'drm-intel-fixes-2023-03-15' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v6.3-rc3: - Fix hwmon PL1 power limit enabling - Fix audio ELD handling for DP MST - Fix PSR io and wake line calculations - Fix DG2 HDMI modes with 267.30 and 319.89 MHz pixel clocks - Fix SSEU subslice out-of-bounds access - Fix misuse of non-idle barriers as fence trackers Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87r0tq5nyn.fsf@intel.com
2023-03-17Merge tag 'drm-misc-fixes-2023-03-16' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Short summary of fixes pull: * fix info leak in edid * build fix for accel/ * ref-counting fix for fbdev deferred I/O * driver fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230316143347.GA9246@linux-uq9g
2023-03-16selftests: net: devlink_port_split.py: skip test if no suitable device availablePo-Hsu Lin
The `devlink -j port show` command output may not contain the "flavour" key, an example from Ubuntu 22.10 s390x LPAR(5.19.0-37-generic), with mlx4 driver and iproute2-5.15.0: {"port":{"pci/0001:00:00.0/1":{"type":"eth","netdev":"ens301"}, "pci/0001:00:00.0/2":{"type":"eth","netdev":"ens301d1"}, "pci/0002:00:00.0/1":{"type":"eth","netdev":"ens317"}, "pci/0002:00:00.0/2":{"type":"eth","netdev":"ens317d1"}}} This will cause a KeyError exception. Create a validate_devlink_output() to check for this "flavour" from devlink command output to avoid this KeyError exception. Also let it handle the check for `devlink -j dev show` output in main(). Apart from this, if the test was not started because the max lanes of the designated device is 0. The script will still return 0 and thus causing a false-negative test result. Use a found_max_lanes flag to determine if these tests were skipped due to this reason and return KSFT_SKIP to make it more clear. Link: https://bugs.launchpad.net/bugs/1937133 Fixes: f3348a82e727 ("selftests: net: Add port split test") Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Link: https://lore.kernel.org/r/20230315165353.229590-1-po-hsu.lin@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-16i825xx: sni_82596: use eth_hw_addr_set()Thomas Bogendoerfer
netdev->dev_addr is now const, we can't write to it directly. Copy scrambled mac address octects into an array then eth_hw_addr_set(). Fixes: adeef3e32146 ("net: constify netdev->dev_addr") Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Link: https://lore.kernel.org/r/20230315134117.79511-1-tsbogend@alpha.franken.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-16net/iucv: Fix size of interrupt dataAlexandra Winter
iucv_irq_data needs to be 4 bytes larger. These bytes are not used by the iucv module, but written by the z/VM hypervisor in case a CPU is deconfigured. Reported as: BUG dma-kmalloc-64 (Not tainted): kmalloc Redzone overwritten ----------------------------------------------------------------------------- 0x0000000000400564-0x0000000000400567 @offset=1380. First byte 0x80 instead of 0xcc Allocated in iucv_cpu_prepare+0x44/0xd0 age=167839 cpu=2 pid=1 __kmem_cache_alloc_node+0x166/0x450 kmalloc_node_trace+0x3a/0x70 iucv_cpu_prepare+0x44/0xd0 cpuhp_invoke_callback+0x156/0x2f0 cpuhp_issue_call+0xf0/0x298 __cpuhp_setup_state_cpuslocked+0x136/0x338 __cpuhp_setup_state+0xf4/0x288 iucv_init+0xf4/0x280 do_one_initcall+0x78/0x390 do_initcalls+0x11a/0x140 kernel_init_freeable+0x25e/0x2a0 kernel_init+0x2e/0x170 __ret_from_fork+0x3c/0x58 ret_from_fork+0xa/0x40 Freed in iucv_init+0x92/0x280 age=167839 cpu=2 pid=1 __kmem_cache_free+0x308/0x358 iucv_init+0x92/0x280 do_one_initcall+0x78/0x390 do_initcalls+0x11a/0x140 kernel_init_freeable+0x25e/0x2a0 kernel_init+0x2e/0x170 __ret_from_fork+0x3c/0x58 ret_from_fork+0xa/0x40 Slab 0x0000037200010000 objects=32 used=30 fp=0x0000000000400640 flags=0x1ffff00000010200(slab|head|node=0|zone=0| Object 0x0000000000400540 @offset=1344 fp=0x0000000000000000 Redzone 0000000000400500: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Redzone 0000000000400510: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Redzone 0000000000400520: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Redzone 0000000000400530: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Object 0000000000400540: 00 01 00 03 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object 0000000000400550: f3 86 81 f2 f4 82 f8 82 f0 f0 f0 f0 f0 f0 f0 f2 ................ Object 0000000000400560: 00 00 00 00 80 00 00 00 cc cc cc cc cc cc cc cc ................ Object 0000000000400570: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Redzone 0000000000400580: cc cc cc cc cc cc cc cc ........ Padding 00000000004005d4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ Padding 00000000004005e4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ Padding 00000000004005f4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZ CPU: 6 PID: 121030 Comm: 116-pai-crypto. Not tainted 6.3.0-20230221.rc0.git4.99b8246b2d71.300.fc37.s390x+debug #1 Hardware name: IBM 3931 A01 704 (z/VM 7.3.0) Call Trace: [<000000032aa034ec>] dump_stack_lvl+0xac/0x100 [<0000000329f5a6cc>] check_bytes_and_report+0x104/0x140 [<0000000329f5aa78>] check_object+0x370/0x3c0 [<0000000329f5ede6>] free_debug_processing+0x15e/0x348 [<0000000329f5f06a>] free_to_partial_list+0x9a/0x2f0 [<0000000329f5f4a4>] __slab_free+0x1e4/0x3a8 [<0000000329f61768>] __kmem_cache_free+0x308/0x358 [<000000032a91465c>] iucv_cpu_dead+0x6c/0x88 [<0000000329c2fc66>] cpuhp_invoke_callback+0x156/0x2f0 [<000000032aa062da>] _cpu_down.constprop.0+0x22a/0x5e0 [<0000000329c3243e>] cpu_device_down+0x4e/0x78 [<000000032a61dee0>] device_offline+0xc8/0x118 [<000000032a61e048>] online_store+0x60/0xe0 [<000000032a08b6b0>] kernfs_fop_write_iter+0x150/0x1e8 [<0000000329fab65c>] vfs_write+0x174/0x360 [<0000000329fab9fc>] ksys_write+0x74/0x100 [<000000032aa03a5a>] __do_syscall+0x1da/0x208 [<000000032aa177b2>] system_call+0x82/0xb0 INFO: lockdep is turned off. FIX dma-kmalloc-64: Restoring kmalloc Redzone 0x0000000000400564-0x0000000000400567=0xcc FIX dma-kmalloc-64: Object at 0x0000000000400540 not freed Fixes: 2356f4cb1911 ("[S390]: Rewrite of the IUCV base code, part 2") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Link: https://lore.kernel.org/r/20230315131435.4113889-1-wintera@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-16net: atlantic: Fix crash when XDP is enabled but no program is loadedToke Høiland-Jørgensen
The aq_xdp_run_prog() function falls back to the XDP_ABORTED action handler (using a goto) if the operations for any of the other actions fail. The XDP_ABORTED handler in turn calls the bpf_warn_invalid_xdp_action() tracepoint. However, the function also jumps into the XDP_PASS helper if no XDP program is loaded on the device, which means the XDP_ABORTED handler can be run with a NULL program pointer. This results in a NULL pointer deref because the tracepoint dereferences the 'prog' pointer passed to it. This situation can happen in multiple ways: - If a packet arrives between the removal of the program from the interface and the static_branch_dec() in aq_xdp_setup() - If there are multiple devices using the same driver in the system and one of them has an XDP program loaded and the other does not. Fix this by refactoring the aq_xdp_run_prog() function to remove the 'goto pass' handling if there is no XDP program loaded. Instead, factor out the skb building in a separate small helper function. Fixes: 26efaef759a1 ("net: atlantic: Implement xdp data plane") Reported-by: Freysteinn Alfredsson <Freysteinn.Alfredsson@kau.se> Tested-by: Freysteinn Alfredsson <Freysteinn.Alfredsson@kau.se> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20230315125539.103319-1-toke@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-16net: usb: smsc75xx: Move packet length check to prevent kernel panic in skb_pullSzymon Heidrich
Packet length check needs to be located after size and align_count calculation to prevent kernel panic in skb_pull() in case rx_cmd_a & RX_CMD_A_RED evaluates to true. Fixes: d8b228318935 ("net: usb: smsc75xx: Limit packet length to skb->len") Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com> Link: https://lore.kernel.org/r/20230316110540.77531-1-szymon.heidrich@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-16ipv4: Fix incorrect table ID in IOCTL pathIdo Schimmel
Commit f96a3d74554d ("ipv4: Fix incorrect route flushing when source address is deleted") started to take the table ID field in the FIB info structure into account when determining if two structures are identical or not. This field is initialized using the 'fc_table' field in the route configuration structure, which is not set when adding a route via IOCTL. The above can result in user space being able to install two identical routes that only differ in the table ID field of their associated FIB info. Fix by initializing the table ID field in the route configuration structure in the IOCTL path. Before the fix: # ip route add default via 192.0.2.2 # route add default gw 192.0.2.2 # ip -4 r show default # default via 192.0.2.2 dev dummy10 # default via 192.0.2.2 dev dummy10 After the fix: # ip route add default via 192.0.2.2 # route add default gw 192.0.2.2 SIOCADDRT: File exists # ip -4 r show default default via 192.0.2.2 dev dummy10 Audited the code paths to ensure there are no other paths that do not properly initialize the route configuration structure when installing a route. Fixes: 5a56a0b3a45d ("net: Don't delete routes in different VRFs") Fixes: f96a3d74554d ("ipv4: Fix incorrect route flushing when source address is deleted") Reported-by: gaoxingwang <gaoxingwang1@huawei.com> Link: https://lore.kernel.org/netdev/20230314144159.2354729-1-gaoxingwang1@huawei.com/ Tested-by: gaoxingwang <gaoxingwang1@huawei.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230315124009.4015212-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-16Merge tag 'ipsec-2023-03-15' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2023-03-15 1) Fix an information leak when dumping algos and encap. From Herbert Xu 2) Allow transport-mode states with AF_UNSPEC selector to allow for nested transport-mode states. From Herbert Xu. * tag 'ipsec-2023-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec: xfrm: Allow transport-mode states with AF_UNSPEC selector xfrm: Zero padding when dumping algos and encap ==================== Link: https://lore.kernel.org/r/20230315105623.1396491-1-steffen.klassert@secunet.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-16Merge branch 'net-renesas-set-mac_managed_pm-at-probe-time'Jakub Kicinski
Wolfram Sang says: ==================== net: renesas: set 'mac_managed_pm' at probe time When suspending/resuming an interface which was not up, we saw mdiobus related PM handling despite 'mac_managed_pm' being set for RAVB/SH_ETH. Heiner kindly suggested the fix to set this flag at probe time, not at init/open time. I implemented his suggestion and it works fine on these two Renesas drivers. ==================== Link: https://lore.kernel.org/r/20230315074115.3008-1-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-16sh_eth: avoid PHY being resumed when interface is not upWolfram Sang
SH_ETH doesn't need mdiobus suspend/resume, that's why it sets 'mac_managed_pm'. However, setting it needs to be moved from init to probe, so mdiobus PM functions will really never be called (e.g. when the interface is not up yet during suspend/resume). Fixes: 6a1dbfefdae4 ("net: sh_eth: Fix PHY state warning splat during system resume") Suggested-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-16ravb: avoid PHY being resumed when interface is not upWolfram Sang
RAVB doesn't need mdiobus suspend/resume, that's why it sets 'mac_managed_pm'. However, setting it needs to be moved from init to probe, so mdiobus PM functions will really never be called (e.g. when the interface is not up yet during suspend/resume). Fixes: 4924c0cdce75 ("net: ravb: Fix PHY state warning splat during system resume") Suggested-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-16Merge tag '6.3-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs client fixes from Steve French: "Seven cifs/smb3 client fixes, all also for stable: - four DFS fixes - multichannel reconnect fix - fix smb1 stats for cancel command - fix for set file size error path" * tag '6.3-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: use DFS root session instead of tcon ses cifs: return DFS root session id in DebugData cifs: fix use-after-free bug in refresh_cache_worker() cifs: set DFS root session in cifs_get_smb_ses() cifs: generate signkey for the channel that's reconnecting cifs: Fix smb2_set_path_size() cifs: Move the in_send statistic to __smb_send_rqst()
2023-03-16Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "ARM64: - Address a rather annoying bug w.r.t. guest timer offsetting. The synchronization of timer offsets between vCPUs was broken, leading to inconsistent timer reads within the VM. x86: - New tests for the slow path of the EVTCHNOP_send Xen hypercall - Add missing nVMX consistency checks for CR0 and CR4 - Fix bug that broke AMD GATag on 512 vCPU machines Selftests: - Skip hugetlb tests if huge pages are not available - Sync KVM exit reasons" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: selftests: Sync KVM exit reasons in selftests KVM: selftests: Add macro to generate KVM exit reason strings KVM: selftests: Print expected and actual exit reason in KVM exit reason assert KVM: selftests: Make vCPU exit reason test assertion common KVM: selftests: Add EVTCHNOP_send slow path test to xen_shinfo_test KVM: selftests: Use enum for test numbers in xen_shinfo_test KVM: selftests: Add helpers to make Xen-style VMCALL/VMMCALL hypercalls KVM: selftests: Move the guts of kvm_hypercall() to a separate macro KVM: SVM: WARN if GATag generation drops VM or vCPU ID information KVM: SVM: Modify AVIC GATag to support max number of 512 vCPUs KVM: SVM: Fix a benign off-by-one bug in AVIC physical table mask selftests: KVM: skip hugetlb tests if huge pages are not available KVM: VMX: Use tabs instead of spaces for indentation KVM: VMX: Fix indentation coding style issue KVM: nVMX: remove unnecessary #ifdef KVM: nVMX: add missing consistency checks for CR0 and CR4 KVM: arm64: timers: Convert per-vcpu virtual offset to a global value
2023-03-16Merge branch 'virtio_net-xdp-bugs'David S. Miller
Xuan Zhuo says: ==================== virtio_net: fix two bugs related to XDP This patch set fixes two bugs related to XDP. These two patch is not associated. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-16virtio_net: free xdp shinfo frags when build_skb_from_xdp_buff() failsXuan Zhuo
build_skb_from_xdp_buff() may return NULL, in this case we need to free the frags of xdp shinfo. Fixes: fab89bafa95b ("virtio-net: support multi-buffer xdp") Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-16virtio_net: fix page_to_skb() miss headroomXuan Zhuo
Because headroom is not passed to page_to_skb(), this causes the shinfo exceeds the range. Then the frags of shinfo are changed by other process. [ 157.724634] stack segment: 0000 [#1] PREEMPT SMP NOPTI [ 157.725358] CPU: 3 PID: 679 Comm: xdp_pass_user_f Tainted: G E 6.2.0+ #150 [ 157.726401] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/4 [ 157.727820] RIP: 0010:skb_release_data+0x11b/0x180 [ 157.728449] Code: 44 24 02 48 83 c3 01 39 d8 7e be 48 89 d8 48 c1 e0 04 41 80 7d 7e 00 49 8b 6c 04 30 79 0c 48 89 ef e8 89 b [ 157.730751] RSP: 0018:ffffc90000178b48 EFLAGS: 00010202 [ 157.731383] RAX: 0000000000000010 RBX: 0000000000000001 RCX: 0000000000000000 [ 157.732270] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff888100dd0b00 [ 157.733117] RBP: 5d5d76010f6e2408 R08: ffff888100dd0b2c R09: 0000000000000000 [ 157.734013] R10: ffffffff82effd30 R11: 000000000000a14e R12: ffff88810981ffc0 [ 157.734904] R13: ffff888100dd0b00 R14: 0000000000000002 R15: 0000000000002310 [ 157.735793] FS: 00007f06121d9740(0000) GS:ffff88842fcc0000(0000) knlGS:0000000000000000 [ 157.736794] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 157.737522] CR2: 00007ffd9a56c084 CR3: 0000000104bda001 CR4: 0000000000770ee0 [ 157.738420] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 157.739283] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 157.740146] PKRU: 55555554 [ 157.740502] Call Trace: [ 157.740843] <IRQ> [ 157.741117] kfree_skb_reason+0x50/0x120 [ 157.741613] __udp4_lib_rcv+0x52b/0x5e0 [ 157.742132] ip_protocol_deliver_rcu+0xaf/0x190 [ 157.742715] ip_local_deliver_finish+0x77/0xa0 [ 157.743280] ip_sublist_rcv_finish+0x80/0x90 [ 157.743834] ip_list_rcv_finish.constprop.0+0x16f/0x190 [ 157.744493] ip_list_rcv+0x126/0x140 [ 157.744952] __netif_receive_skb_list_core+0x29b/0x2c0 [ 157.745602] __netif_receive_skb_list+0xed/0x160 [ 157.746190] ? udp4_gro_receive+0x275/0x350 [ 157.746732] netif_receive_skb_list_internal+0xf2/0x1b0 [ 157.747398] napi_gro_receive+0xd1/0x210 [ 157.747911] virtnet_receive+0x75/0x1c0 [ 157.748422] virtnet_poll+0x48/0x1b0 [ 157.748878] __napi_poll+0x29/0x1b0 [ 157.749330] net_rx_action+0x27a/0x340 [ 157.749812] __do_softirq+0xf3/0x2fb [ 157.750298] do_softirq+0xa2/0xd0 [ 157.750745] </IRQ> [ 157.751563] <TASK> [ 157.752329] __local_bh_enable_ip+0x6d/0x80 [ 157.753178] virtnet_xdp_set+0x482/0x860 [ 157.754159] ? __pfx_virtnet_xdp+0x10/0x10 [ 157.755129] dev_xdp_install+0xa4/0xe0 [ 157.756033] dev_xdp_attach+0x20b/0x5e0 [ 157.756933] do_setlink+0x82e/0xc90 [ 157.757777] ? __nla_validate_parse+0x12b/0x1e0 [ 157.758744] rtnl_setlink+0xd8/0x170 [ 157.759549] ? mod_objcg_state+0xcb/0x320 [ 157.760328] ? security_capable+0x37/0x60 [ 157.761209] ? security_capable+0x37/0x60 [ 157.762072] rtnetlink_rcv_msg+0x145/0x3d0 [ 157.762929] ? ___slab_alloc+0x327/0x610 [ 157.763754] ? __alloc_skb+0x141/0x170 [ 157.764533] ? __pfx_rtnetlink_rcv_msg+0x10/0x10 [ 157.765422] netlink_rcv_skb+0x58/0x110 [ 157.766229] netlink_unicast+0x21f/0x330 [ 157.766951] netlink_sendmsg+0x240/0x4a0 [ 157.767654] sock_sendmsg+0x93/0xa0 [ 157.768434] ? sockfd_lookup_light+0x12/0x70 [ 157.769245] __sys_sendto+0xfe/0x170 [ 157.770079] ? handle_mm_fault+0xe9/0x2d0 [ 157.770859] ? preempt_count_add+0x51/0xa0 [ 157.771645] ? up_read+0x3c/0x80 [ 157.772340] ? do_user_addr_fault+0x1e9/0x710 [ 157.773166] ? kvm_read_and_reset_apf_flags+0x49/0x60 [ 157.774087] __x64_sys_sendto+0x29/0x30 [ 157.774856] do_syscall_64+0x3c/0x90 [ 157.775518] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 157.776382] RIP: 0033:0x7f06122def70 Fixes: 18117a842ab0 ("virtio-net: remove xdp related info from page_to_skb()") Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-16net: Use of_property_read_bool() for boolean propertiesRob Herring
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to of_property_read_bool(). Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for net/can Acked-by: Kalle Valo <kvalo@kernel.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Reviewed-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-16Merge branch 'net-dsa-marvell-mtu-reporting'David S. Miller
Vladimir Oltean says: ==================== Fix MTU reporting for Marvell DSA switches where we can't change it As explained in patch 2, the driver doesn't know how to change the MTU on MV88E6165, MV88E6191, MV88E6220, MV88E6250 and MV88E6290, and there is a regression where it actually reports an MTU value below the Ethernet standard (1500). Fixing that shows another issue where DSA is unprepared to be told that a switch supports an MTU of only 1500, and still errors out. That is addressed by patch 1. Testing was not done on "real" hardware, but on a different Marvell DSA switch, with code modified such that the driver doesn't know how to change the MTU on that, either. A key assumption is that these switches don't need any MTU configuration to pass full MTU-sized, DSA-tagged packets, which seems like a reasonable assumption to make. My 6390 and 6190 switches, with .port_set_jumbo_size commented out, certainly don't seem to have any problem passing MTU-sized traffic, as can be seen in this iperf3 session captured with tcpdump on the DSA master: $MAC > $MAC, Marvell DSA mode Forward, dev 2, port 8, untagged, VID 1000, FPri 0, ethertype IPv4 (0x0800), length 1518: 10.0.0.69.49590 > 10.0.0.1.5201: Flags [.], seq 81088:82536, ack 1, win 502, options [nop,nop,TS val 2221498829 ecr 3012859850], length 1448 I don't want to go all the way and say that the adjustment made by commit b9c587fed61c ("dsa: mv88e6xxx: Include tagger overhead when setting MTU for DSA and CPU ports") is completely unnecessary, just that there's an equally good chance that the switches with unknown MTU configuration procedure "just work". ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-16net: dsa: mv88e6xxx: fix max_mtu of 1492 on 6165, 6191, 6220, 6250, 6290Vladimir Oltean
There are 3 classes of switch families that the driver is aware of, as far as mv88e6xxx_change_mtu() is concerned: - MTU configuration is available per port. Here, the chip->info->ops->port_set_jumbo_size() method will be present. - MTU configuration is global to the switch. Here, the chip->info->ops->set_max_frame_size() method will be present. - We don't know how to change the MTU. Here, none of the above methods will be present. Switch families MV88E6165, MV88E6191, MV88E6220, MV88E6250 and MV88E6290 fall in category 3. The blamed commit has adjusted the MTU for all 3 categories by EDSA_HLEN (8 bytes), resulting in a new maximum MTU of 1492 being reported by the driver for these switches. I don't have the hardware to test, but I do have a MV88E6390 switch on which I can simulate this by commenting out its .port_set_jumbo_size definition from mv88e6390_ops. The result is this set of messages at probe time: mv88e6085 d0032004.mdio-mii:10: nonfatal error -34 setting MTU to 1500 on port 1 mv88e6085 d0032004.mdio-mii:10: nonfatal error -34 setting MTU to 1500 on port 2 mv88e6085 d0032004.mdio-mii:10: nonfatal error -34 setting MTU to 1500 on port 3 mv88e6085 d0032004.mdio-mii:10: nonfatal error -34 setting MTU to 1500 on port 4 mv88e6085 d0032004.mdio-mii:10: nonfatal error -34 setting MTU to 1500 on port 5 mv88e6085 d0032004.mdio-mii:10: nonfatal error -34 setting MTU to 1500 on port 6 mv88e6085 d0032004.mdio-mii:10: nonfatal error -34 setting MTU to 1500 on port 7 mv88e6085 d0032004.mdio-mii:10: nonfatal error -34 setting MTU to 1500 on port 8 It is highly implausible that there exist Ethernet switches which don't support the standard MTU of 1500 octets, and this is what the DSA framework says as well - the error comes from dsa_slave_create() -> dsa_slave_change_mtu(slave_dev, ETH_DATA_LEN). But the error messages are alarming, and it would be good to suppress them. As a consequence of this unlikeliness, we reimplement mv88e6xxx_get_max_mtu() and mv88e6xxx_change_mtu() on switches from the 3rd category as follows: the maximum supported MTU is 1500, and any request to set the MTU to a value larger than that fails in dev_validate_mtu(). Fixes: b9c587fed61c ("dsa: mv88e6xxx: Include tagger overhead when setting MTU for DSA and CPU ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-16net: dsa: don't error out when drivers return ETH_DATA_LEN in .port_max_mtu()Vladimir Oltean
Currently, when dsa_slave_change_mtu() is called on a user port where dev->max_mtu is 1500 (as returned by ds->ops->port_max_mtu()), the code will stumble upon this check: if (new_master_mtu > mtu_limit) return -ERANGE; because new_master_mtu is adjusted for the tagger overhead but mtu_limit is not. But it would be good if the logic went through, for example if the DSA master really depends on an MTU adjustment to accept DSA-tagged frames. To make the code pass through the check, we need to adjust mtu_limit for the overhead as well, if the minimum restriction was caused by the DSA user port's MTU (dev->max_mtu). A DSA user port MTU and a DSA master MTU are always offset by the protocol overhead. Currently no drivers return 1500 .port_max_mtu(), but this is only temporary and a bug in itself - mv88e6xxx should have done that, but since commit b9c587fed61c ("dsa: mv88e6xxx: Include tagger overhead when setting MTU for DSA and CPU ports") it no longer does. This is a preparation for fixing that. Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-16ice: xsk: disable txq irq before flushing hwMaciej Fijalkowski
ice_qp_dis() intends to stop a given queue pair that is a target of xsk pool attach/detach. One of the steps is to disable interrupts on these queues. It currently is broken in a way that txq irq is turned off *after* HW flush which in turn takes no effect. ice_qp_dis(): -> ice_qvec_dis_irq() --> disable rxq irq --> flush hw -> ice_vsi_stop_tx_ring() -->disable txq irq Below splat can be triggered by following steps: - start xdpsock WITHOUT loading xdp prog - run xdp_rxq_info with XDP_TX action on this interface - start traffic - terminate xdpsock [ 256.312485] BUG: kernel NULL pointer dereference, address: 0000000000000018 [ 256.319560] #PF: supervisor read access in kernel mode [ 256.324775] #PF: error_code(0x0000) - not-present page [ 256.329994] PGD 0 P4D 0 [ 256.332574] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 256.337006] CPU: 3 PID: 32 Comm: ksoftirqd/3 Tainted: G OE 6.2.0-rc5+ #51 [ 256.345218] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 256.355807] RIP: 0010:ice_clean_rx_irq_zc+0x9c/0x7d0 [ice] [ 256.361423] Code: b7 8f 8a 00 00 00 66 39 ca 0f 84 f1 04 00 00 49 8b 47 40 4c 8b 24 d0 41 0f b7 45 04 66 25 ff 3f 66 89 04 24 0f 84 85 02 00 00 <49> 8b 44 24 18 0f b7 14 24 48 05 00 01 00 00 49 89 04 24 49 89 44 [ 256.380463] RSP: 0018:ffffc900088bfd20 EFLAGS: 00010206 [ 256.385765] RAX: 000000000000003c RBX: 0000000000000035 RCX: 000000000000067f [ 256.393012] RDX: 0000000000000775 RSI: 0000000000000000 RDI: ffff8881deb3ac80 [ 256.400256] RBP: 000000000000003c R08: ffff889847982710 R09: 0000000000010000 [ 256.407500] R10: ffffffff82c060c0 R11: 0000000000000004 R12: 0000000000000000 [ 256.414746] R13: ffff88811165eea0 R14: ffffc9000d255000 R15: ffff888119b37600 [ 256.421990] FS: 0000000000000000(0000) GS:ffff8897e0cc0000(0000) knlGS:0000000000000000 [ 256.430207] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 256.436036] CR2: 0000000000000018 CR3: 0000000005c0a006 CR4: 00000000007706e0 [ 256.443283] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 256.450527] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 256.457770] PKRU: 55555554 [ 256.460529] Call Trace: [ 256.463015] <TASK> [ 256.465157] ? ice_xmit_zc+0x6e/0x150 [ice] [ 256.469437] ice_napi_poll+0x46d/0x680 [ice] [ 256.473815] ? _raw_spin_unlock_irqrestore+0x1b/0x40 [ 256.478863] __napi_poll+0x29/0x160 [ 256.482409] net_rx_action+0x136/0x260 [ 256.486222] __do_softirq+0xe8/0x2e5 [ 256.489853] ? smpboot_thread_fn+0x2c/0x270 [ 256.494108] run_ksoftirqd+0x2a/0x50 [ 256.497747] smpboot_thread_fn+0x1c1/0x270 [ 256.501907] ? __pfx_smpboot_thread_fn+0x10/0x10 [ 256.506594] kthread+0xea/0x120 [ 256.509785] ? __pfx_kthread+0x10/0x10 [ 256.513597] ret_from_fork+0x29/0x50 [ 256.517238] </TASK> In fact, irqs were not disabled and napi managed to be scheduled and run while xsk_pool pointer was still valid, but SW ring of xdp_buff pointers was already freed. To fix this, call ice_qvec_dis_irq() after ice_vsi_stop_tx_ring(). Also while at it, remove redundant ice_clean_rx_ring() call - this is handled in ice_qp_clean_rings(). Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-16Merge branch 'net-virtio-vsock'David S. Miller
2023-03-16test/vsock: copy to user failure testArseniy Krasnov
This adds SOCK_STREAM and SOCK_SEQPACKET tests for invalid buffer case. It tries to read data to NULL buffer (data already presents in socket's queue), then uses valid buffer. For SOCK_STREAM second read must return data, because skbuff is not dropped, but for SOCK_SEQPACKET skbuff will be dropped by kernel, and 'recv()' will return EAGAIN. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-16virtio/vsock: don't drop skbuff on copy failureArseniy Krasnov
This returns behaviour of SOCK_STREAM read as before skbuff usage. When copying to user fails current skbuff won't be dropped, but returned to sockets's queue. Technically instead of 'skb_dequeue()', 'skb_peek()' is called and when skbuff becomes empty, it is removed from queue by '__skb_unlink()'. Fixes: 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff") Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Bobby Eshleman <bobby.eshleman@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-16virtio/vsock: remove redundant 'skb_pull()' callArseniy Krasnov
Since we now no longer use 'skb->len' to update credit, there is no sense to update skbuff state, because it is used only once after dequeue to copy data and then will be released. Fixes: 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff") Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Bobby Eshleman <bobby.eshleman@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-16virtio/vsock: don't use skbuff state to account creditArseniy Krasnov
'skb->len' can vary when we partially read the data, this complicates the calculation of credit to be updated in 'virtio_transport_inc_rx_pkt()/ virtio_transport_dec_rx_pkt()'. Also in 'virtio_transport_dec_rx_pkt()' we were miscalculating the credit since 'skb->len' was redundant. For these reasons, let's replace the use of skbuff state to calculate new 'rx_bytes'/'fwd_cnt' values with explicit value as input argument. This makes code more simple, because it is not needed to change skbuff state before each call to update 'rx_bytes'/'fwd_cnt'. Fixes: 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff") Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Bobby Eshleman <bobby.eshleman@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-16block: remove obsolete config BLOCK_COMPATLukas Bulwahn
Before commit bdc1ddad3e5f ("compat_ioctl: block: move blkdev_compat_ioctl() into ioctl.c"), the config BLOCK_COMPAT was used to include compat_ioctl.c into the kernel build. With this commit, the code is moved into ioctl.c and included with the config COMPAT. So, since then, the config BLOCK_COMPAT has no effect and any further purpose. Remove this obsolete config BLOCK_COMPAT. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230316111630.4897-1-lukas.bulwahn@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-16io_uring/rsrc: fix folio accountingPavel Begunkov
| BUG: Bad page state in process kworker/u8:0 pfn:5c001 | page:00000000bfda61c8 refcount:0 mapcount:0 mapping:0000000000000000 index:0x20001 pfn:0x5c001 | head:0000000011409842 order:9 entire_mapcount:0 nr_pages_mapped:0 pincount:1 | anon flags: 0x3fffc00000b0004(uptodate|head|mappedtodisk|swapbacked|node=0|zone=0|lastcpupid=0xffff) | raw: 03fffc0000000000 fffffc0000700001 ffffffff00700903 0000000100000000 | raw: 0000000000000200 0000000000000000 00000000ffffffff 0000000000000000 | head: 03fffc00000b0004 dead000000000100 dead000000000122 ffff00000a809dc1 | head: 0000000000020000 0000000000000000 00000000ffffffff 0000000000000000 | page dumped because: nonzero pincount | CPU: 3 PID: 9 Comm: kworker/u8:0 Not tainted 6.3.0-rc2-00001-gc6811bf0cd87 #1 | Hardware name: linux,dummy-virt (DT) | Workqueue: events_unbound io_ring_exit_work | Call trace: | dump_backtrace+0x13c/0x208 | show_stack+0x34/0x58 | dump_stack_lvl+0x150/0x1a8 | dump_stack+0x20/0x30 | bad_page+0xec/0x238 | free_tail_pages_check+0x280/0x350 | free_pcp_prepare+0x60c/0x830 | free_unref_page+0x50/0x498 | free_compound_page+0xcc/0x100 | free_transhuge_page+0x1f0/0x2b8 | destroy_large_folio+0x80/0xc8 | __folio_put+0xc4/0xf8 | gup_put_folio+0xd0/0x250 | unpin_user_page+0xcc/0x128 | io_buffer_unmap+0xec/0x2c0 | __io_sqe_buffers_unregister+0xa4/0x1e0 | io_ring_exit_work+0x68c/0x1188 | process_one_work+0x91c/0x1a58 | worker_thread+0x48c/0xe30 | kthread+0x278/0x2f0 | ret_from_fork+0x10/0x20 Mark reports an issue with the recent patches coalescing compound pages while registering them in io_uring. The reason is that we try to drop excessive references with folio_put_refs(), but pages were acquired with pin_user_pages(), which has extra accounting and so should be put down with matching unpin_user_pages() or at least gup_put_folio(). As a fix unpin_user_pages() all but first page instead, and let's figure out a better API after. Fixes: 57bebf807e2abcf8 ("io_uring/rsrc: optimise registered huge pages") Reported-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Tested-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/10efd5507d6d1f05ea0f3c601830e08767e189bd.1678980230.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-16fbdev: Use of_property_present() for testing DT property presenceRob Herring
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Helge Deller <deller@gmx.de>
2023-03-16fbdev: au1200fb: Fix potential divide by zeroWei Chen
var->pixclock can be assigned to zero by user. Without proper check, divide by zero would occur when invoking macro PICOS2KHZ in au1200fb_fb_check_var. Error out if var->pixclock is zero. Signed-off-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2023-03-16fbdev: lxfb: Fix potential divide by zeroWei Chen
var->pixclock can be assigned to zero by user. Without proper check, divide by zero would occur in lx_set_clock. Error out if var->pixclock is zero. Signed-off-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2023-03-16fbdev: intelfb: Fix potential divide by zeroWei Chen
Variable var->pixclock is controlled by user and can be assigned to zero. Without proper check, divide by zero would occur in intelfbhw_validate_mode and intelfbhw_mode_to_hw. Error out if var->pixclock is zero. Signed-off-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2023-03-16fbdev: nvidia: Fix potential divide by zeroWei Chen
variable var->pixclock can be set by user. In case it equals to zero, divide by zero would occur in nvidiafb_set_par. Similar crashes have happened in other fbdev drivers. There is no check and modification on var->pixclock along the call chain to nvidia_check_var and nvidiafb_set_par. We believe it could also be triggered in driver nvidia from user site. Signed-off-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2023-03-16fbdev: stifb: Provide valid pixelclock and add fb_check_var() checksHelge Deller
Find a valid modeline depending on the machine graphic card configuration and add the fb_check_var() function to validate Xorg provided graphics settings. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org
2023-03-16kbuild: use git-archive for source package creationMasahiro Yamada
Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-16kbuild: rpm-pkg: move source components to rpmbuild/SOURCESMasahiro Yamada
Prepare to add more files to the source RPM. Also, fix the build error when KCONFIG_CONFIG is set: error: Bad file: ./.config: No such file or directory Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-16io_uring/msg_ring: let target know allocated indexPavel Begunkov
msg_ring requests transferring files support auto index selection via IORING_FILE_INDEX_ALLOC, however they don't return the selected index to the target ring and there is no other good way for the userspace to know where is the receieved file. Return the index for allocated slots and 0 otherwise, which is consistent with other fixed file installing requests. Cc: stable@vger.kernel.org # v6.0+ Fixes: e6130eba8a848 ("io_uring: add support for passing fixed file descriptors") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://github.com/axboe/liburing/issues/809 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-16Merge tag 'nvme-6.3-2022-03-16' of git://git.infradead.org/nvme into block-6.3Jens Axboe
Pull NVMe fixes from Christoph: "nvme fixes for Linux 6.3 - avoid potential UAF in nvmet_req_complete (Damien Le Moal) - more quirks (Elmer Miroslav Mosher Golovin, Philipp Geulen) - fix a memory leak in the nvme-pci probe teardown path (Irvin Cote) - repair the MAINTAINERS entry (Lukas Bulwahn) - fix handling single range discard request (Ming Lei) - show more opcode names in trace events (Minwoo Im) - fix nvme-tcp timeout reporting (Sagi Grimberg)" * tag 'nvme-6.3-2022-03-16' of git://git.infradead.org/nvme: nvmet: avoid potential UAF in nvmet_req_complete() nvme-trace: show more opcode names nvme-tcp: add nvme-tcp pdu size build protection nvme-tcp: fix opcode reporting in the timeout handler nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM620 nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV3000 nvme-pci: fixing memory leak in probe teardown path nvme: fix handling single range discard request MAINTAINERS: repair malformed T: entries in NVM EXPRESS DRIVERS
2023-03-16x86/mm: Fix use of uninitialized buffer in sme_enable()Nikita Zhandarovich
cmdline_find_option() may fail before doing any initialization of the buffer array. This may lead to unpredictable results when the same buffer is used later in calls to strncmp() function. Fix the issue by returning early if cmdline_find_option() returns an error. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: aca20d546214 ("x86/mm: Add support to make use of Secure Memory Encryption") Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/20230306160656.14844-1-n.zhandarovich@fintech.ru
generated by cgit (git 2.34.1) at 2025-07-16 19:39:34 +0000