| Age | Commit message (Collapse) | Author |
|---|
|
The powerup delay was not observed during probe, leading to occasional
I2C communication failures in RPM suspend callback. Power delay is
properly observed in resume callback already.
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The SYSTEM_CTRL0 register in ov5645 is almost similar to ov5640. But the
hard reset control is mandatory for the ov5645 device, so there is no
need for soft reset in the driver.
Add a 1msec delay for the software power up (OV5645_SYSTEM_CTRL0_START)
register in ov5645_global_init_setting. Without this delay sometimes the
image is not captured at all when the i2c frequency is 400kHz.
The changes are fixing both the greenish issue and image capture at 400kHz
i2c frequency on Renesas RZ/G2L SMARC EVK platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
req_fr check in alvium_s_frame_interval() is incorrect. In particular
req_fr can't be >=max and <= min at the same time. Ensure the requested
frame rate remains within the supported range between min_fr and max_fr by
clamping it.
Also remove the unused dft_fr argument of alvium_get_frame_interval().
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Use the newly added storage for frame interval in the subdev state to
simplify the driver.
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Inline alvium_set_frame_interval() into alvium_s_frame_interval().
The alvium_set_frame_interval() is called once only, by
alvium_s_frame_interval(). The latter is a thin wrapper around the
former. Inline the function in its caller to make the code more
readable.
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The fr (frame rate) field of the alvium_dev structure is
only used to pass result from alvium_set_frame_interval() to
alvium_set_frame_rate() that writes this info into the hw reg.
Replace it with a function parameter.
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The dft_fr, min_fr and max_fr fields of the alvium_dev structure are
only used to pass results from alvium_get_frame_interval() to its
caller. Replace them with function parameters.
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
When running tests with different input data, the stable output frames
could be too similar and hide possible issues.
This commit adds variation by using some codec specific parameters.
Only HEVC and H.264 support this.
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: add media: prefix to Subject]
|
|
Also document stable frames and what it means for testing tools.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: add media: prefix to Subject]
|
|
The text written on the output frames stable for a given input.
Remove the unstable elements like pointers, buffer indexes or queues
status so that frames are always identical and can be compared against
a reference in automatic tests.
As the unstable information can be relevant when debugging the API, add
a tpg_verbose parameter to show them.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: correct a few small checkpatch issues]
|
|
This avoids confusion with default values and lets userspace
programs get the modules parameters values at run time.
This can be useful when setting up a test suite.
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Drivers that call v4l2_async_nf_init() need to select the corresponding
Kconfig symbol:
ERROR: modpost: "v4l2_async_nf_init" [drivers/media/platform/marvell/cafe_ccic.ko] undefined!
ERROR: modpost: "__v4l2_async_nf_add_i2c" [drivers/media/platform/marvell/cafe_ccic.ko] undefined!
ERROR: modpost: "v4l2_async_nf_unregister" [drivers/media/platform/marvell/mcam-core.ko] undefined!
ERROR: modpost: "v4l2_async_nf_init" [drivers/media/platform/marvell/mmp_camera.ko] undefined!
ERROR: modpost: "__v4l2_async_nf_add_fwnode_remote" [drivers/media/platform/marvell/mmp_camera.ko] undefined!
I checked all v4l2 drivers to see if anything else has the same
bug, but these two appear to be the only ones.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
clang-16 complains about a control flow integrity (KCFI) issue in pvrusb2,
which casts three different prototypes into pvr2_stream_callback:
drivers/media/usb/pvrusb2/pvrusb2-v4l2.c:1070:30: error: cast from 'void (*)(struct pvr2_v4l2_fh *)' to 'pvr2_stream_callback' (aka 'void (*)(void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
1070 | pvr2_stream_set_callback(sp,(pvr2_stream_callback)pvr2_v4l2_notify,fh);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/media/usb/pvrusb2/pvrusb2-context.c:110:6: error: cast from 'void (*)(struct pvr2_context *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
110 | (void (*)(void *))pvr2_context_notify,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/media/usb/pvrusb2/pvrusb2-dvb.c:152:6: error: cast from 'void (*)(struct pvr2_dvb_adapter *)' to 'pvr2_stream_callback' (aka 'void (*)(void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
152 | (pvr2_stream_callback) pvr2_dvb_notify, adap);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Change the functions to actually take a void* argument so the cast is no longer
needed.
Fixes: bb8ce9d9143c ("V4L/DVB (7682): pvrusb2-dvb: finish up stream & buffer handling")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
clang-16 warns about casting incompatible function pointers:
drivers/media/pci/sta2x11/sta2x11_vip.c:1057:6: error: cast from 'irqreturn_t (*)(int, struct sta2x11_vip *)' (aka 'enum irqreturn (*)(int, struct sta2x11_vip *)') to 'irq_handler_t' (aka 'enum irqreturn (*)(int, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
Change the prototype of the irq handler to the regular version with a
local variable to adjust the argument type.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: update argument documentation]
|
|
While at it rearrange other comments to match the order of struct members.
Fixes: d65842f7126a ("media: vb2: add waiting_in_dqbuf flag")
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Pointer dip->stream cannot be NULL due to a shift, thus remove redundant
NULL check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: c74e0062684b ("V4L/DVB (5059): Pvrusb2: Be smarter about mode restoration")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
If go7007_read_addr() returns error channel is not assigned a value.
In this case go to allocfail.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 866b8695d67e ("Staging: add the go7007 video driver")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the bttv_sub_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
This patch resolves a spelling error in the documentation.
It is submitted as part of my application to the "Linux Kernel Bug
Fixing Spring Unpaid 2024" mentorship program of the Linux Kernel
Foundation.
Signed-off-by: Vincenzo Mezzela <vincenzo.mezzela@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
In most cases the is_valid_ioctl() macro is used to check if an ioctl is
valid, except in one place. Use it there as well as it makes the code
easier to read.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
A wrapper function is available since the commit 7945f929f1a7
("drivers: provide devm_platform_ioremap_resource()").
* Thus reuse existing functionality instead of keeping duplicate source
code.
* Delete a local variable which became unnecessary with this refactoring.
This issue was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The Google Dita device uses the same approach as the Google Brask
which enables the HDMI CEC via the cros-ec-cec driver.
Signed-off-by: Kells Ping <kells.ping@quanta.corp-partner.google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The pointer mode is being initialized with a value that is never
read, it is being re-assigned later on. The initialization is
redundant and can be removed.
Cleans up clang scan build warning:
drivers/media/i2c/st-vgxy61.c:632:33: warning: Value stored to 'mode'
during its initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The variable bcal is being initialized with a value that is never
read, it is being re-assigned in both paths of an if statement near
the end of the function. The initialization is redundant and can
be removed.
Cleans up clang scan build warning:
drivers/media/tuners/tda18271-fe.c:473:2: warning: Value stored
to 'bcal' is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Menu controls that use the menu_skip_mask require that the min-max range is
inside 0-63.
Negative values obviously make no sense for menu controls, and the maximum
value is currently limited by the number of bits of the menu_skip_mask
value. However, if menu_skip_mask == 0, then larger menus are fine.
If we ever need to add support for larger menus that support the skip
mask, then more work is needed.
In the places where the menu_skip_mask is checked, use BIT_ULL to get the
bit to check and check if the bit number is < BITS_PER_LONG_LONG to avoid
shifting out of range. With the new check in check_range this should
never happen, but it is better to be safe and avoid static analyzer
warnings.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Driver abort vpu decoding when both output and capture queues are off,
but if seek in parsing the sequence header, driver may miss aborting the
parsing. so just abort the vpu parsing directly in seek.
Meanwhile if capture is off unexpectedly, we still need to abort the
decoding and return capture buffers.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
This mxc-jpeg driver doesn't allow the client to set the bytesperline,
but for some android cts case, it need to negotiate the bytesperline
between decoder and display, and fail the case if driver doesn't support
negotiating bytesperline
The jpegdec and jpegenc does support to set bytesperline which is
multiple of 2, and greater than the value calulated by driver.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Free the memory allocated in v4l2_ctrl_handler_init on release.
Fixes: a8ef0488cc59 ("media: imx: add csc/scaler mem2mem device")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
For StarFive JH7110 Camera Subsystem, capture_raw video device output
raw10 pixelformat requires 16bit of alignment.
Fixes: e080f339c80a ("media: staging: media: starfive: camss: Add capture driver")
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The rcar-csi2 driver was added before the platform/renesas directory
existed and since it was used together in a pipeline with the rcar-vin
driver it was located together with it.
The rcar-isp driver can also be used together with the rcar-csi2 driver
in a pipeline that is terminated by the rcar-vin driver. However by the
time rcar-isp was added the platform/renesas directory existed so it was
added there.
To remove the confusion that the rcar-csi2 driver have code dependencies
on the rcar-vin driver move it to the same directory level as the
rcar-isp driver. This makes it clear they are three distinct drivers
that can be used together in a pipeline, but do not depend on each
other.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The last argument of v4l2_ctrl_add_handler() indicates whether the controls
you add are from a control handler owned by another driver (true) or from
the same driver (false). In this case the last argument was incorrectly set
to false. The control handlers are from different devices.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Fix the following errors reported by checkpatch:
ERROR: "foo* bar" should be "foo *bar"
Signed-off-by: XueBing Chen <chenxb_99091@126.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Fix the following errors reported by checkpatch:
ERROR: space prohibited before that ',' (ctx:WxW)
Signed-off-by: XueBing Chen <chenxb_99091@126.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Fix the following errors reported by checkpatch:
ERROR: space prohibited before that ',' (ctx:WxW)
Signed-off-by: XueBing Chen <chenxb_99091@126.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Fix the following errors reported by checkpatch:
ERROR: "foo* bar" should be "foo *bar"
Signed-off-by: XueBing Chen <chenxb_99091@126.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
It has been wrong from the beginning.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Reported-by: Ulrich Mueller <ulm@gentoo.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
A freezable kernel thread can enter frozen state during freezing by
either calling try_to_freeze() or using wait_event_freezable() and its
variants. So for the following snippet of code in a kernel thread loop:
try_to_freeze();
wait_event_interruptible();
We can change it to a simple wait_event_freezable() and then eliminate
a function call.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The msp_sleep() is nearly open-coded wait_event_interruptible_timeout(),
and a freezable kernel thread can enter frozen state during freezing by
either calling try_to_freeze() or using wait_event_freezable() and its
variants. So we can reimplement msp_sleep() to simply invoke
a wait_event_freezable_timeout() and then eliminate a call to
try_to_freeze().
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
A freezable kernel thread can enter frozen state during freezing by
either calling try_to_freeze() or using wait_event_freezable() and its
variants. So for the following snippet of code in a kernel thread loop:
wait_event_interruptible_timeout();
try_to_freeze();
We can change it to a simple wait_event_freezable_timeout() and
then eliminate a function call.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
While there is no good explanation what this value does, vendor driver
uses value 31 for it. Align driver with it.
Fixes: a4260ea49547 ("media: sun4i: Add H3 deinterlace driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
According to user manual, reset line should be deasserted before clocks
are enabled. Also fix power down sequence to be reverse of that.
Fixes: a4260ea49547 ("media: sun4i: Add H3 deinterlace driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Currently coefficients are applied only once, since they don't change.
However, this is done before enable bit is set and thus it doesn't get
applied properly.
Fix that by applying coefficients after enable bit is set. While this
means that it will be done evey time, it doesn't bring much time
penalty.
Fixes: a4260ea49547 ("media: sun4i: Add H3 deinterlace driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
bit_size field holds size of slice, not slice + header. Because of HW
quirks, driver can't program in just slice, but also preceding header.
But that means that currently used bit_size is wrong (too small).
Instead, just use size of whole buffer. There is no harm in doing this.
Fixes: 86caab29da78 ("media: cedrus: Add HEVC/H.265 decoding support")
Suggested-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
./drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateless.c:569:2-3: Unneeded semicolon
./drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateless.c:583:2-3: Unneeded semicolon
./drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateless.c:599:2-3: Unneeded semicolon
./drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateless.c:613:2-3: Unneeded semicolon
./drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateless.c:633:2-3: Unneeded semicolon
./drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateless.c:647:2-3: Unneeded semicolon
./drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateless.c:683:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7632
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
As per section 35.3.1 Starting Reception for the MIPI CSI-2 Input on the
latest hardware manual (R01UH0914EJ0145 Rev.1.45) we need to supply all
the clocks and then release the CRU resets. Currently we are releasing
the resets and then supplying the clocks. So, fix the start reception
procedure.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20240213181233.242316-6-biju.das.jz@bp.renesas.com
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
As per section 35.3.1 Starting Reception for the MIPI CSI-2 Input on the
latest hardware manual (R01UH0914EJ0145 Rev.1.45) we need to disable the
vclk before enabling the LINK reception and enable the vclk after enabling
the link Reception. So restructure vclk handling as per the HW manual.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20240213181233.242316-5-biju.das.jz@bp.renesas.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
As per section 35.3.1 Starting Reception for the MIPI CSI-2 Input on the
latest hardware manual (R01UH0914EJ0140 Rev.1.40) it is mentioned that
initialize the AXI master first and then initialize the image processing.
Fix the start procedure as per the hardware manual.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20240213181233.242316-4-biju.das.jz@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
As per section 35.3.1 Starting Reception for the MIPI CSI-2 Input on the
latest hardware manual (R01UH0914EJ0140 Rev.1.40) it is mentioned that
after DPHY reset, we need to wait for 1 msec or more before start
receiving data from the sensor. So add a delay after pre_streamon().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20240213181233.242316-3-biju.das.jz@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Replace the old SET_RUNTIME_PM_OPS() helpers with its modern alternative
RUNTIME_PM_OPS(). The usage of pm_ptr and RUNTIME_PM_OPS() allows the
compiler to see where it's used but still drop the dead code. After this
we can get rid of the unnecessary '__maybe_unused' annotations on PM
functions.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20240213181233.242316-2-biju.das.jz@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
In dvb_register_device, *pdvbdev is set equal to dvbdev, which is freed
in several error-handling paths. However, *pdvbdev is not set to NULL
after dvbdev's deallocation, causing use-after-frees in many places,
for example, in the following call chain:
budget_register
|-> dvb_dmxdev_init
|-> dvb_register_device
|-> dvb_dmxdev_release
|-> dvb_unregister_device
|-> dvb_remove_device
|-> dvb_device_put
|-> kref_put
When calling dvb_unregister_device, dmxdev->dvbdev (i.e. *pdvbdev in
dvb_register_device) could point to memory that had been freed in
dvb_register_device. Thereafter, this pointer is transferred to
kref_put and triggering a use-after-free.
Link: https://lore.kernel.org/linux-media/20240203134046.3120099-1-alexious@zju.edu.cn
Fixes: b61901024776 ("V4L/DVB (5244): Dvbdev: fix illegal re-usage of fileoperations struct")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
