summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-05-24Documentation: net/mlx5: Add blank line separator before numbered listsBagas Sanjaya
The doc forgets to add separator before numbered lists, which causes the lists to be appended to previous paragraph inline instead. Add the missing separator. Fixes: f2d51e579359b7 ("net/mlx5: Separate mlx5 driver documentation into multiple pages") Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24Documentation: net/mlx5: Use bullet and definition lists for vnic counters ↵Bagas Sanjaya
description "vnic reporter" section contains unformatted description for vnic counters, which is rendered as one long paragraph instead of list. Use bullet and definition lists to match other lists. Fixes: b0bc615df488ab ("net/mlx5: Add vnic devlink health reporter to PFs/VFs") Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24Documentation: net/mlx5: Wrap vnic reporter devlink commands in code blocksBagas Sanjaya
Sphinx reports htmldocs warnings: Documentation/networking/device_drivers/ethernet/mellanox/mlx5/devlink.rst:287: WARNING: Unexpected indentation. Documentation/networking/device_drivers/ethernet/mellanox/mlx5/devlink.rst:288: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/networking/device_drivers/ethernet/mellanox/mlx5/devlink.rst:290: WARNING: Unexpected indentation. Fix above warnings by wrapping diagnostic devlink commands in "vnic reporter" section in code blocks to be consistent with other devlink command snippets. Fixes: b0bc615df488ab ("net/mlx5: Add vnic devlink health reporter to PFs/VFs") Fixes: cf14af140a5ad0 ("net/mlx5e: Add vnic devlink health reporter to representors") Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24net/mlx5: Fix check for allocation failure in comp_irqs_request_pci()Dan Carpenter
This function accidentally dereferences "cpus" instead of returning directly. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/r/202305200354.KV3jU94w-lkp@intel.com/ Fixes: b48a0f72bc3e ("net/mlx5: Refactor completion irq request/release code") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24net/mlx5: DR, Add missing mutex init/destroy in pattern managerYevgeny Kliteynik
Add missing mutex init/destroy as caught by the lock's debug warning: DEBUG_LOCKS_WARN_ON(lock->magic != lock) Fixes: da5d0027d666 ("net/mlx5: DR, Add cache for modify header pattern") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24net/mlx5e: Move Ethernet driver debugfs to profile init callbackJianbo Liu
As priv->dfs_root is cleared, and therefore missed, when change eswitch mode, move the creation of the root debugfs to the init callback of mlx5e_nic_profile and mlx5e_uplink_rep_profile, and the destruction to the cleanup callback for symmeter. Fixes: 288eca60cc31 ("net/mlx5e: Add Ethernet driver debugfs") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24net/mlx5e: Don't attach netdev profile while handling internal errorDmytro Linkin
As part of switchdev mode disablement, driver changes port netdevice profile from uplink to nic. If this process is triggered by health recovery flow (PCI reset, for ex.) profile attach would fail because all fw commands aborted when internal error flag is set. As a result, nic netdevice profile is not attached and driver fails to rollback to uplink profile, which leave driver in broken state and cause crash later. To handle broken state do netdevice profile initialization only instead of full attachment and release mdev resources on driver suspend as expected. Actual netdevice attachment is done during driver load. Fixes: c4d7eb57687f ("net/mxl5e: Add change profile method") Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24net/mlx5: Fix post parse infra to only parse every action onceVlad Buslov
Caller of mlx5e_tc_act_post_parse() needs it to parse only the subset of actions starting after previous split and ending at the current action. However, that range is not provided as arguments and mlx5e_tc_act_post_parse() uses generic flow_action_for_each() that iterates over all flow actions. Not only this is redundant, it also causes a bug when mlx5e_tc_act->post_parse() callback is not idempotent since it will be called for every split. For example, ct action tc_act_post_parse_ct() callback obtains a reference to mlx5_ct_ft instance and calling it several times during parsing stage will cause reference counter imbalance. Fix the issue by providing a proper action range of the current split subset to mlx5e_tc_act_post_parse() and only calling mlx5e_tc_act->post_parse() for actions inside the subset range. Fixes: 8300f225268b ("net/mlx5e: Create new flow attr for multi table actions") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24net/mlx5e: Use query_special_contexts cmd only once per mdevDragos Tatulea
Don't query the firmware so many times (num rqs * num wqes * wqe frags) because it slows down linearly the interface creation time when the product is larger. Do it only once per mdev and store the result in mlx5e_param. Due to helper function being called from different files, move it to an appropriate location. Rename the function with a proper prefix and add a small cleanup. This fix applies only for legacy rq. Fixes: 1b1e4868836a ("net/mlx5e: Use query_special_contexts for mkeys") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Or Har-Toov <ohartoov@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24net/mlx5: fw_tracer, Fix event handlingShay Drory
mlx5 driver needs to parse traces with event_id inside the range of first_string_trace and num_string_trace. However, mlx5 is parsing all events with event_id >= first_string_trace. Fix it by checking for the correct range. Fixes: c71ad41ccb0c ("net/mlx5: FW tracer, events handling") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24net/mlx5: SF, Drain health before removing deviceShay Drory
There is no point in recovery during device removal. Also, if health work started need to wait for it to avoid races and NULL pointer access. Hence, drain health WQ before removing device. Fixes: 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24net/mlx5: Drain health before unregistering devlinkShay Drory
mlx5 health mechanism is using devlink APIs, which are using devlink notify APIs. After the cited patch, using devlink notify APIs after devlink is unregistered triggers a WARN_ON(). Hence, drain health WQ before devlink is unregistered. Fixes: cf530217408e ("devlink: Notify users when objects are accessible") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24net/mlx5e: Do not update SBCM when prio2buffer command is invalidMaher Sanalla
The shared buffer pools configuration which are stored in the SBCM register are updated when the user changes the prio2buffer mapping. However, in case the user desired prio2buffer change is invalid, which can occur due to mapping a lossless priority to a not large enough buffer, the SBCM update should not be performed, as the user command is failed. Thus, Perform the SBCM update only after xoff threshold calculation is performed and the user prio2buffer mapping is validated. Fixes: a440030d8946 ("net/mlx5e: Update shared buffer along with device buffer changes") Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24net/mlx5e: Consider internal buffers size in port buffer calculationsMaher Sanalla
Currently, when a user triggers a change in port buffer headroom (buffers 0-7), the driver checks that the requested headroom does not exceed the total port buffer size. However, this check does not take into account the internal buffers (buffers 8-9), which are also part of the total port buffer. This can result in treating invalid port buffer change requests as valid, causing unintended changes to the shared buffer. To address this, include the internal buffers size in the calculation of available port buffer space which ensures that port buffer requests do not exceed the correct limit. Furthermore, remove internal buffers (8-9) size from the total_size calculation as these buffers are reserved for internal use and are not exposed to the user. While at it, add verbosity to the debug prints in mlx5e_port_query_buffer() function to ease future debugging. Fixes: ecdf2dadee8e ("net/mlx5e: Receive buffer support for DCBX") Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24net/mlx5e: Prevent encap offload when neigh update is runningChris Mi
The cited commit adds a compeletion to remove dependency on rtnl lock. But it causes a deadlock for multiple encapsulations: crash> bt ffff8aece8a64000 PID: 1514557 TASK: ffff8aece8a64000 CPU: 3 COMMAND: "tc" #0 [ffffa6d14183f368] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14183f3f8] schedule at ffffffffb8ba8418 #2 [ffffa6d14183f418] schedule_preempt_disabled at ffffffffb8ba8898 #3 [ffffa6d14183f428] __mutex_lock at ffffffffb8baa7f8 #4 [ffffa6d14183f4d0] mutex_lock_nested at ffffffffb8baabeb #5 [ffffa6d14183f4e0] mlx5e_attach_encap at ffffffffc0f48c17 [mlx5_core] #6 [ffffa6d14183f628] mlx5e_tc_add_fdb_flow at ffffffffc0f39680 [mlx5_core] #7 [ffffa6d14183f688] __mlx5e_add_fdb_flow at ffffffffc0f3b636 [mlx5_core] #8 [ffffa6d14183f6f0] mlx5e_tc_add_flow at ffffffffc0f3bcdf [mlx5_core] #9 [ffffa6d14183f728] mlx5e_configure_flower at ffffffffc0f3c1d1 [mlx5_core] #10 [ffffa6d14183f790] mlx5e_rep_setup_tc_cls_flower at ffffffffc0f3d529 [mlx5_core] #11 [ffffa6d14183f7a0] mlx5e_rep_setup_tc_cb at ffffffffc0f3d714 [mlx5_core] #12 [ffffa6d14183f7b0] tc_setup_cb_add at ffffffffb8931bb8 #13 [ffffa6d14183f810] fl_hw_replace_filter at ffffffffc0dae901 [cls_flower] #14 [ffffa6d14183f8d8] fl_change at ffffffffc0db5c57 [cls_flower] #15 [ffffa6d14183f970] tc_new_tfilter at ffffffffb8936047 #16 [ffffa6d14183fac8] rtnetlink_rcv_msg at ffffffffb88c7c31 #17 [ffffa6d14183fb50] netlink_rcv_skb at ffffffffb8942853 #18 [ffffa6d14183fbc0] rtnetlink_rcv at ffffffffb88c1835 #19 [ffffa6d14183fbd0] netlink_unicast at ffffffffb8941f27 #20 [ffffa6d14183fc18] netlink_sendmsg at ffffffffb8942245 #21 [ffffa6d14183fc98] sock_sendmsg at ffffffffb887d482 #22 [ffffa6d14183fcb8] ____sys_sendmsg at ffffffffb887d81a #23 [ffffa6d14183fd38] ___sys_sendmsg at ffffffffb88806e2 #24 [ffffa6d14183fe90] __sys_sendmsg at ffffffffb88807a2 #25 [ffffa6d14183ff28] __x64_sys_sendmsg at ffffffffb888080f #26 [ffffa6d14183ff38] do_syscall_64 at ffffffffb8b9b6a8 #27 [ffffa6d14183ff50] entry_SYSCALL_64_after_hwframe at ffffffffb8c0007c crash> bt 0xffff8aeb07544000 PID: 1110766 TASK: ffff8aeb07544000 CPU: 0 COMMAND: "kworker/u20:9" #0 [ffffa6d14e6b7bd8] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14e6b7c68] schedule at ffffffffb8ba8418 #2 [ffffa6d14e6b7c88] schedule_timeout at ffffffffb8baef88 #3 [ffffa6d14e6b7d10] wait_for_completion at ffffffffb8ba968b #4 [ffffa6d14e6b7d60] mlx5e_take_all_encap_flows at ffffffffc0f47ec4 [mlx5_core] #5 [ffffa6d14e6b7da0] mlx5e_rep_update_flows at ffffffffc0f3e734 [mlx5_core] #6 [ffffa6d14e6b7df8] mlx5e_rep_neigh_update at ffffffffc0f400bb [mlx5_core] #7 [ffffa6d14e6b7e50] process_one_work at ffffffffb80acc9c #8 [ffffa6d14e6b7ed0] worker_thread at ffffffffb80ad012 #9 [ffffa6d14e6b7f10] kthread at ffffffffb80b615d #10 [ffffa6d14e6b7f50] ret_from_fork at ffffffffb8001b2f After the first encap is attached, flow will be added to encap entry's flows list. If neigh update is running at this time, the following encaps of the flow can't hold the encap_tbl_lock and sleep. If neigh update thread is waiting for that flow's init_done, deadlock happens. Fix it by holding lock outside of the for loop. If neigh update is running, prevent encap flows from offloading. Since the lock is held outside of the for loop, concurrent creation of encap entries is not allowed. So remove unnecessary wait_for_completion call for res_ready. Fixes: 95435ad7999b ("net/mlx5e: Only access fully initialized flows in neigh update") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24net/mlx5e: Extract remaining tunnel encap code to dedicated fileChris Mi
Move set_encap_dests() and clean_encap_dests() to the tunnel encap dedicated file. And rename them to mlx5e_tc_tun_encap_dests_set() and mlx5e_tc_tun_encap_dests_unset(). No functional change in this patch. It is needed in the next patch. Signed-off-by: Chris Mi <cmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24smb3: move Documentation/filesystems/cifs to Documentation/filesystems/smbSteve French
Documentation/filesystems/cifs contains both server and client information so its pathname is misleading. In addition, the directory fs/smb now contains both server and client, so move Documentation/filesystems/cifs to Documentation/filesystems/smb Suggested-by: Namjae Jeon <linkinjeon@kernel.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-05-24cifs: correct references in Documentation to old fs/cifs pathSteve French
The fs/cifs directory has moved to fs/smb/client, correct mentions of this in Documentation and comments. Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-05-24smb: move client and server files to common directory fs/smbSteve French
Move CIFS/SMB3 related client and server files (cifs.ko and ksmbd.ko and helper modules) to new fs/smb subdirectory: fs/cifs --> fs/smb/client fs/ksmbd --> fs/smb/server fs/smbfs_common --> fs/smb/common Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-05-24cifs: mapchars mount option ignoredSteve French
There are two ways that special characters (not allowed in some other operating systems like Windows, but allowed in POSIX) have been mapped in the past ("SFU" and "SFM" mappings) to allow them to be stored in a range reserved for special chars. The default for Linux has been to use "mapposix" (ie the SFM mapping) but the conversion to the new mount API in the 5.11 kernel broke the ability to override the default mapping of the reserved characters (like '?' and '*' and '\') via "mapchars" mount option. This patch fixes that - so can now mount with "mapchars" mount option to override the default ("mapposix" ie SFM) mapping. Reported-by: Tyler Spivey <tspivey8@gmail.com> Fixes: 24e0a1eff9e2 ("cifs: switch to new mount api") Signed-off-by: Steve French <stfrench@microsoft.com>
2023-05-24smb3: display debug information better for encryptionSteve French
Fix /proc/fs/cifs/DebugData to use the same case for "encryption" (ie "Encryption" with init capital letter was used in one place). In addition, if gcm256 encryption (intead of gcm128) is used on a connection to a server, note that in the DebugData as well. It now displays (when gcm256 negotiated): Security type: RawNTLMSSP SessionId: 0x86125800bc000b0d encrypted(gcm256) Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-05-24cifs: fix smb1 mount regressionPaulo Alcantara
cifs.ko maps NT_STATUS_NOT_FOUND to -EIO when SMB1 servers couldn't resolve referral paths. Proceed to tree connect when we get -EIO from dfs_get_referral() as well. Reported-by: Kris Karas (Bug Reporting) <bugs-a21@moonlit-rail.com> Tested-by: Woody Suwalski <terraluna977@gmail.com> Fixes: 8e3554150d6c ("cifs: fix sharing of DFS connections") Cc: stable@vger.kernel.org # v6.2+ Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-05-24drm/amd/display: Have Payload Properly Created After ResumeFangzhi Zuo
At drm suspend sequence, MST dc_sink is removed. When commit cached MST stream back in drm resume sequence, the MST stream payload is not properly created and added into the payload table. After resume, topology change is reprobed by removing existing streams first. That leads to no payload is found in the existing payload table as below error "[drm] ERROR No payload for [MST PORT:] found in mst state" 1. In encoder .atomic_check routine, remove check existance of dc_sink 2. Bypass MST by checking existence of MST root port. dc_link_type cannot differentiate MST port before topology is rediscovered. Reviewed-by: Wayne Lin <wayne.lin@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-05-24drm/amd/display: Fix warning in disabling vblank irqAlan Liu
[Why] During gpu-reset, we toggle vblank irq by calling dc_interrupt_set() instead of amdgpu_irq_get/put() because we don't want to change the irq source's refcount. However, we see the warning when vblank irq is enabled by dc_interrupt_set() during gpu-reset but disabled by amdgpu_irq_put() after gpu-reset. [How] Only in dm_gpureset_toggle_interrupts() we toggle vblank interrupts by calling dc_interrupt_set(). Apart from this we call dm_set_vblank() which uses amdgpu_irq_get/put() to operate vblank irq. Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alan Liu <haoping.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-05-24perf/x86/uncore: Correct the number of CHAs on SPRKan Liang
The number of CHAs from the discovery table on some SPR variants is incorrect, because of a firmware issue. An accurate number can be read from the MSR UNC_CBO_CONFIG. Fixes: 949b11381f81 ("perf/x86/intel/uncore: Add Sapphire Rapids server CHA support") Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Stephane Eranian <eranian@google.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230508140206.283708-1-kan.liang@linux.intel.com
2023-05-24drm/amd/pm: Fix output of pp_od_clk_voltageJonatas Esteves
Printing the other clock types should not be conditioned on being able to print OD_SCLK. Some GPUs currently have limited capability of only printing a subset of these. Since this condition was introduced in v5.18-rc1, reading from `pp_od_clk_voltage` has been returning empty on the Asus ROG Strix G15 (2021). Fixes: 79c65f3fcbb1 ("drm/amd/pm: do not expose power implementation details to amdgpu_pm.c") Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Jonatas Esteves <jntesteves@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-05-24drm/amd/pm: add missing NotifyPowerSource message mapping for SMU13.0.7Evan Quan
Otherwise, the power source switching will fail due to message unavailable. Fixes: bf4823267a81 ("drm/amd/pm: fix possible power mode mismatch between driver and PMFW") Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-05-24drm/radeon: reintroduce radeon_dp_work_func contentAlex Deucher
Put back the radeon_dp_work_func logic. It seems that handling DP RX interrupts is necessary to make some panels work. This was removed with the MST support, but it regresses some systems so add it back. While we are here, add the proper mutex locking. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2567 Fixes: 01ad1d9c2888 ("drm/radeon: Drop legacy MST support") Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org
2023-05-24drm/amdgpu: don't enable secure display on incompatible platformsJesse Zhang
[why] [drm] psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [drm] psp gfx command INVOKE_CMD(0x3) failed and response status is (0x4) amdgpu 0000:04:00.0: amdgpu: Secure display: Generic Failure. [how] don't enable secure display on incompatible platforms Suggested-by: Aaron Liu <aaron.liu@amd.com> Signed-off-by: Jesse zhang <jesse.zhang@amd.com> Reviewed-by: Aaron Liu <aaron.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-05-24drm:amd:amdgpu: Fix missing buffer object unlock in failure pathSukrut Bellary
smatch warning - 1) drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:3615 gfx_v9_0_kiq_resume() warn: inconsistent returns 'ring->mqd_obj->tbo.base.resv'. 2) drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:6901 gfx_v10_0_kiq_resume() warn: inconsistent returns 'ring->mqd_obj->tbo.base.resv'. Signed-off-by: Sukrut Bellary <sukrut.bellary@linux.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-05-24Merge tag 'spi-fix-v6.4-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A collection of fixes that came in since the merge window, plus an update to MAINTAINERS. The Cadence fixes are coming from the addition of device mode support, they required a couple of incremental updates in order to get something that works robustly for both device and controller modes" * tag 'spi-fix-v6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spi-cadence: Interleave write of TX and read of RX FIFO spi: dw: Replace spi->chip_select references with function calls spi: MAINTAINERS: drop Krzysztof Kozlowski from Samsung SPI spi: spi-cadence: Only overlap FIFO transactions in slave mode spi: spi-cadence: Avoid read of RX FIFO before its ready spi: spi-geni-qcom: Select FIFO mode for chip select
2023-05-24Merge tag 'regulator-fix-v6.4-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "Some fixes that came in since the merge window, nothing terribly exciting - a couple of driver specific fixes and a fix for the error handling when setting up the debugfs for the devices" * tag 'regulator-fix-v6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: mt6359: add read check for PMIC MT6359 regulator: Fix error checking for debugfs_create_dir regulator: pca9450: Fix BUCK2 enable_mask
2023-05-24Merge tag 'mmc-v6.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Fix error propagation for the non-block-device I/O paths MMC host: - sdhci-cadence: Fix an error path during probe - sdhci-esdhc-imx: Fix support for the 'no-mmc-hs400' DT property" * tag 'mmc-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-esdhc-imx: make "no-mmc-hs400" works mmc: sdhci-cadence: Fix an error handling path in sdhci_cdns_probe() mmc: block: ensure error propagation for non-blk
2023-05-24thermal: intel: int340x: Add new line for UUID displaySrinivas Pandruvada
Prior to the commit "763bd29fd3d1 ("thermal: int340x_thermal: Use sysfs_emit_at() instead of scnprintf()", there was a new line after each UUID string. With the newline removed, existing user space like "thermald" fails to compare each supported UUID as it is using getline() to read UUID and apply correct thermal table. To avoid breaking existing user space, add newline after each UUID string. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Fixes: 763bd29fd3d1 ("thermal: int340x_thermal: Use sysfs_emit_at() instead of scnprintf()") Cc: 6.3+ <stable@vger.kernel.org> # 6.3+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-05-24cpufreq: amd-pstate: Remove fast_switch_possible flag from active driverWyes Karny
amd_pstate active mode driver is only compatible with static governors. Therefore it doesn't need fast_switch functionality. Remove fast_switch_possible flag from amd_pstate active mode driver. Fixes: ffa5096a7c33 ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors") Signed-off-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-05-24cpufreq: amd-pstate: Add ->fast_switch() callbackGautham R. Shenoy
Schedutil normally calls the adjust_perf callback for drivers with adjust_perf callback available and fast_switch_possible flag set. However, when frequency invariance is disabled and schedutil tries to invoke fast_switch. So, there is a chance of kernel crash if this function pointer is not set. To protect against this scenario add fast_switch callback to amd_pstate driver. Fixes: 1d215f0319c2 ("cpufreq: amd-pstate: Add fast switch function for AMD P-State") Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-05-24parisc: Fix flush_dcache_page() for usage from irq contextHelge Deller
Since at least kernel 6.1, flush_dcache_page() is called with IRQs disabled, e.g. from aio_complete(). But the current implementation for flush_dcache_page() on parisc unintentionally re-enables IRQs, which may lead to deadlocks. Fix it by using xa_lock_irqsave() and xa_unlock_irqrestore() for the flush_dcache_mmap_*lock() macros instead. Cc: linux-parisc@vger.kernel.org Cc: stable@kernel.org # 5.18+ Signed-off-by: Helge Deller <deller@gmx.de>
2023-05-24x86/pci/xen: populate MSI sysfs entriesMaximilian Heyne
Commit bf5e758f02fc ("genirq/msi: Simplify sysfs handling") reworked the creation of sysfs entries for MSI IRQs. The creation used to be in msi_domain_alloc_irqs_descs_locked after calling ops->domain_alloc_irqs. Then it moved into __msi_domain_alloc_irqs which is an implementation of domain_alloc_irqs. However, Xen comes with the only other implementation of domain_alloc_irqs and hence doesn't run the sysfs population code anymore. Commit 6c796996ee70 ("x86/pci/xen: Fixup fallout from the PCI/MSI overhaul") set the flag MSI_FLAG_DEV_SYSFS for the xen msi_domain_info but that doesn't actually have an effect because Xen uses it's own domain_alloc_irqs implementation. Fix this by making use of the fallback functions for sysfs population. Fixes: bf5e758f02fc ("genirq/msi: Simplify sysfs handling") Signed-off-by: Maximilian Heyne <mheyne@amazon.de> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20230503131656.15928-1-mheyne@amazon.de Signed-off-by: Juergen Gross <jgross@suse.com>
2023-05-24xen/pvcalls-back: fix double frees with pvcalls_new_active_socket()Dan Carpenter
In the pvcalls_new_active_socket() function, most error paths call pvcalls_back_release_active(fedata->dev, fedata, map) which calls sock_release() on "sock". The bug is that the caller also frees sock. Fix this by making every error path in pvcalls_new_active_socket() release the sock, and don't free it in the caller. Fixes: 5db4d286a8ef ("xen/pvcalls: implement connect command") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/e5f98dc2-0305-491f-a860-71bbd1398a2f@kili.mountain Signed-off-by: Juergen Gross <jgross@suse.com>
2023-05-24xen/blkfront: Only check REQ_FUA for writesRoss Lagerwall
The existing code silently converts read operations with the REQ_FUA bit set into write-barrier operations. This results in data loss as the backend scribbles zeroes over the data instead of returning it. While the REQ_FUA bit doesn't make sense on a read operation, at least one well-known out-of-tree kernel module does set it and since it results in data loss, let's be safe here and only look at REQ_FUA for writes. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20230426164005.2213139-1-ross.lagerwall@citrix.com Signed-off-by: Juergen Gross <jgross@suse.com>
2023-05-24block: make bio_check_eod work for zero sized devicesChristoph Hellwig
Since the dawn of time bio_check_eod has a check for a non-zero size of the device. This doesn't really make any sense as we never want to send I/O to a device that's been set to zero size, or never moved out of that. I am a bit surprised we haven't caught this for a long time, but the removal of the extra validation inside of zram caused syzbot to trip over this issue recently. I've added a Fixes tag for that commit, but the issue really goes back way before git history. Fixes: 9fe95babc742 ("zram: remove valid_io_request") Reported-by: syzbot+b8d61a58b7c7ebd2c8e0@syzkaller.appspotmail.com Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230524060538.1593686-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-05-24parisc: Handle kgdb breakpoints only in kernel contextHelge Deller
The kernel kgdb break instructions should only be handled when running in kernel context. Cc: <stable@vger.kernel.org> # v5.4+ Signed-off-by: Helge Deller <deller@gmx.de>
2023-05-24parisc: Handle kprobes breakpoints only in kernel contextHelge Deller
The kernel kprobes break instructions should only be handled when running in kernel context. Cc: <stable@vger.kernel.org> # v5.18+ Signed-off-by: Helge Deller <deller@gmx.de>
2023-05-24parisc: Allow to reboot machine after system haltHelge Deller
In case a machine can't power-off itself on system shutdown, allow the user to reboot it by pressing the RETURN key. Cc: <stable@vger.kernel.org> # v4.14+ Signed-off-by: Helge Deller <deller@gmx.de>
2023-05-24parisc: Enable LOCKDEP supportHelge Deller
Cc: <stable@vger.kernel.org> # v6.0+ Signed-off-by: Helge Deller <deller@gmx.de>
2023-05-24parisc: Add lightweight spinlock checksHelge Deller
Add a lightweight spinlock check which uses only two instructions per spinlock call. It detects if a spinlock has been trashed by some memory corruption and then halts the kernel. It will not detect uninitialized spinlocks, for which CONFIG_DEBUG_SPINLOCK needs to be enabled. This lightweight spinlock check shouldn't influence runtime, so it's safe to enable it by default. The __ARCH_SPIN_LOCK_UNLOCKED_VAL constant has been choosen small enough to be able to be loaded by one LDI assembler statement. Signed-off-by: Helge Deller <deller@gmx.de>
2023-05-24ALSA: hda/realtek: Enable headset onLenovo M70/M90Bin Li
Lenovo M70/M90 Gen4 are equipped with ALC897, and they need ALC897_FIXUP_HEADSET_MIC_PIN quirk to make its headset mic work. The previous quirk for M70/M90 is for Gen3. Signed-off-by: Bin Li <bin.li@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230524113755.1346928-1-bin.li@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-05-24regmap: maple: Drop the RCU read lock while syncing registersMark Brown
Unfortunately the maple tree requires us to explicitly lock it so we need to take the RCU read lock while iterating. When syncing this means that we end up trying to write out register values while holding the RCU read lock which triggers lockdep issues since that is an atomic context but most buses can't be used in atomic context. Pause the iteration and drop the lock for each register we check to avoid this. Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230523-regcache-maple-sync-lock-v1-1-530e4d68dfab@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-24regmap: sdw: check for invalid multi-register writes configSrinivas Kandagatla
SoundWire code as it is only supports Bulk register writes and it does not support multi-register writes. Any drivers that set can_multi_write and use regmap_multi_reg_write() will easily endup with programming the hardware incorrectly without any errors. So, add this check in bus code to be able to validate the drivers config. Fixes: 522272047dc6 ("regmap: sdw: Remove 8-bit value size restriction") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230523154747.5429-1-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-24Merge tag 'asoc-fix-v6.4-rc3' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.4 A collection of fixes for v6.4, mostly driver specific but there's also one fix for DPCM to avoid incorrectly repeated calls to prepare() which can trigger issues on some systems.
generated by cgit (git 2.34.1) at 2025-07-20 01:02:46 +0000