summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-02-08arm64: dts: qcom: c630: Add backlight controllerBjorn Andersson
The Lenovo Yoga C630 uses the PWM controller in the TI SN65DSI86 bridge chip to provide a signal for the backlight control and has TLMM GPIO 11 attached to some regulator that drives the backlight. Unfortunately the regulator attached to this gpio is also powering the camera, so turning off backlight result in the detachment of the camera as well. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Steev Klimaszewski <steev@kali.org> Link: https://lore.kernel.org/r/20220208041606.144039-1-bjorn.andersson@linaro.org
2022-02-04arm64: dts: qcom: sc7280: Add herobrine-r1Douglas Anderson
Add the new herobrine-r1. Note that this is pretty much a re-design compared to herobrine-r0 so we don't attempt any dtsi to share stuff between them. This patch attempts to define things at 3 levels: 1. The Qcard level. Herobrine includes a Qcard PCB and the Qcard PCB is supposed to be the same (modulo stuffing options) across multiple boards, so trying to define what's there hopefully makes sense. NOTE that newer "CRD" boards from Qualcomm also use Qcard. When support for CRD3 is added hopefully it can use the Qcard include (and perhaps we should even evaluate it using herobrine.dtsi?) 2. The herobrine "baseboard" level. Right now most stuff is here with the exception of things that we _know_ will be different per board. We know that not all boards will have the same set of eMMC, nvme, and SD. We also know that the exact pin names are likely to be different. 3. The actual "board" level, AKA herobrine-rev1. NOTES: - This boots to command prompt. We're still waiting on the PWM driver. - This assumes LTE for now. Once it's clear how WiFi-only SKUs will work we expect some small changes. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220204140550.v4.1.I5604b7af908e8bbe709ac037a6a8a6ba8a2bfa94@changeid
2022-02-04arm64: dts: qcom: Add SM8450 HDK DTSVinod Koul
This adds the base HDK DTS along with the usb, ufs and regulators found in this board Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220203090031.3128702-2-vkoul@kernel.org
2022-02-04dt-bindings: arm: qcom: Document SM8450 HDK boardsVinod Koul
Document the SM8450 HDK board Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220203090031.3128702-1-vkoul@kernel.org
2022-02-04arm64: dts: qcom: sc7280: Add a blank line in the dp nodeDouglas Anderson
It's weird that there's a blank line between the two port nodes but not between the attributes and the first port node. Add an extra blank line to make it look right. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220202132301.v3.11.Iecb7267402e697a5cfef4cd517116ea5b308ac9e@changeid
2022-02-04arm64: dts: qcom: sc7280: Move dp_hot_plug_det pull from SoC dtsi fileDouglas Anderson
Pulls should be in the board files, not in the SoC dtsi file. Remove. Even though the sc7280 boards don't currently refer to dp_hot_plug_det, let's re-add the pulls there just to keep this as a no-op change. If boards don't need this / don't want it later then we can remove it from them. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220202132301.v3.10.Id346b23642f91e16d68d75f44bcdb5b9fbd155ea@changeid
2022-02-04arm64: dts: qcom: sc7280: Move pcie1_clkreq pull / drive str to boardsDouglas Anderson
Pullups and drive strength don't belong in the SoC dtsi file. Move to the board file. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220202132301.v3.8.Iffff0c12440a047212a164601e637b03b9d2fc78@changeid
2022-02-04arm64: dts: qcom: sc7280: Add edp_out port and HPD linesDouglas Anderson
Like dp_out, we should have defined edp_out in sc7280.dtsi so we don't need to do this in the board files. Like dp_hot_plug_det, we should define edp_hot_plug_det in sc7280.dtsi. We should set the default pinctrl for edp_hot_plug_det in sc7280.dtsi. NOTE: this is _unlike_ the dp_hot_plug_det. It is reasonable that in some boards the dedicated DP Hot Plug Detect will not be hooked up in favor of Type C mechanisms. This is unlike eDP where the Hot Plug Detect line (which functions as "panel ready" in eDP) is highly likely to be used by boards. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220202132301.v3.7.Ic84bb69c45be2fccf50e3bd17b845fe20eec624c@changeid
2022-02-04arm64: dts: qcom: sc7280: Fix sort order of dp_hot_plug_det / pcie1_clkreq_nDouglas Anderson
The two nodes were mis-sorted. Reorder. This is a no-op change. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220202132301.v3.6.I874c6f2a62b7922a33e10d390a8983219a76250b@changeid
2022-02-04arm64: dts: qcom: sc7280-idp: No need for "input-enable" on sw_ctrlDouglas Anderson
Specifying "input-enable" on a MSM GPIO is a no-op for the most part. The only thing it really does is to explicitly force the output of a GPIO to be disabled right at the point of a pinctrl transition. We don't need to do this and we don't typically specify "input-enable" unless there's a good reason to. Remove it. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220202132301.v3.5.Ibaf8a803802beb089cc6266b37e6156cff3ddaec@changeid
2022-02-04arm64: dts: qcom: sc7280: Clean up sdc1 / sdc2 pinctrlDouglas Anderson
This patch makes a few improvements to the way that sdc1 / sdc2 pinctrl is specified on sc7280: 1. There's no reason to "group" the sdc pins into one overarching node and there's a downside: we have to replicate the hierarchy in the board device tree files. Let's clean this up. 2. There's really not a lot of reason not to list the "pinctrl" for sdc1 (eMMC) in the SoC dtsi file. These aren't GPIO pins and everyone's going to specify the same pins. 3. Even though it's likely that boards will need to override pinctrl for sdc2 (SD card) to add the card detect GPIO, we can be symmetric and add it to the SoC dsti file. 4. Let's get rid of the word "on" from the normal config and add a "sleep" suffix to the sleep config. This looks cleaner to me. This is intended to be a no-op change but it could plausibly change behavior depending on how the pinctrl code parses things. One thing to note is that "SD card detect" is explicitly listed now as keeping its pull enabled in sleep since we still want to detect card insertions even if the controller is suspended (because no card is inserted). The pinctrl framework likely did this anyway, but it's nice to see it explicit. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220202132301.v3.4.I79baad7f52351aafb470f8b21a9fa79d7031ad6a@changeid
2022-02-04arm64: dts: qcom: sc7280: Properly sort sdc pinctrl linesDouglas Anderson
The sdc1 / sdc2 pinctrl lines were randomly stuffed in the middle of the qup pinctrl lines. Sort them properly. This is a no-op change. Just code movement. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220202132301.v3.3.I6ae594129a8ad3d18af9f5ebffd895b4f6353a0a@changeid
2022-02-04arm64: dts: qcom: sc7280-herobrine: Consistently add "-regulator" suffixDouglas Anderson
Some of the fixed regulators were missing the "-regulator" suffix. Add it to be consistent within the file and consistent with the fixed regulators in sc7180-trogdor. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220202132301.v3.2.I627e60c5488d54a45fd1482ca19f0f6e45192db2@changeid
2022-02-04arm64: dts: qcom: sc7180-trogdor: Add "-regulator" suffix to pp3300_hubDouglas Anderson
All of the other fixed regulators have the "-regulator" suffix. Add it to pp3300_hub to match. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220202132301.v3.1.I7b284531f1c992932f7eef8abaf7cc5548064f33@changeid
2022-02-04arm64: dts: qcom: sm8450-qrd: Enable remoteproc instancesBjorn Andersson
Enable the audio, compute, sensor and modem remoteproc and specify firmware path for these on the Qualcomm SM8450 QRD. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220128025513.97188-14-bjorn.andersson@linaro.org
2022-02-04arm64: dts: qcom: sm8450: Add remoteproc enablers and instancesBjorn Andersson
The Qualcomm SM8450 carries the familiar set of audio, compute, sensor and modem remoteprocs. Add these and their dependencies. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220128025513.97188-13-bjorn.andersson@linaro.org
2022-02-03arm64: dts: qcom: add IPA qcom,qmp propertyAlex Elder
At least three platforms require the "qcom,qmp" property to be specified, so the IPA driver can request register retention across power collapse. Update DTS files accordingly. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220201140723.467431-1-elder@linaro.org
2022-01-31arm64: dts: qcom: sdm845: add device tree for SHIFT6mqAlexander Martinz
Add initial support for the SHIFT SHIFT6mq (axolotl) based on the sdm845-mtp DT. Currently supported features: * Buttons (power, volume) * Bluetooth, DSPs and modem * Display and GPU * Touch * UART * USB peripheral mode * WLAN Co-developed-by: Caleb Connolly <caleb@connolly.tech> Signed-off-by: Caleb Connolly <caleb@connolly.tech> Signed-off-by: Alexander Martinz <amartinz@shiftphones.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220123173650.290349-7-caleb@connolly.tech
2022-01-31arm64: dts: qcom: sdm845-oneplus-*: add fuel gaugeCaleb Connolly
The OnePlus 6 and 6T feature a BQ27411 fuel gauge for reading the battery stats. Enable it and add a simple battery to document the battery specs of each device. Signed-off-by: Caleb Connolly <caleb@connolly.tech> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220120184546.499030-1-caleb@connolly.tech
2022-01-31arm64: dts: qcom: ipq6018: fix usb reference periodBaruch Siach
Reference clock period for rate of 24MHz is 41ns (0x29). Link: https://lore.kernel.org/r/1965fc315525b8ab26cf9f71f939c24d@codeaurora.org Link: https://lore.kernel.org/r/a1932eba-564c-fe32-f220-53aa75250105@seco.com Fixes: 20bb9e3dd2e4 ("arm64: dts: qcom: ipq6018: add usb3 DT description") Reported-by: Kathiravan T <kathirav@codeaurora.org> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/4f4df55cf44cd0fd7d773aca171d4f48662fb1a5.1642704221.git.baruch@tkos.co.il
2022-01-31arm64: dts: qcom: msm8994-huawei-angler: Add vendor name huaweiPetr Vorel
to follow the naming convention used by other DTS files. Signed-off-by: Petr Vorel <petr.vorel@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220113233358.17972-5-petr.vorel@gmail.com
2022-01-31arm64: dts: qcom: msm8994: Provide missing "xo_board" and "sleep_clk" to GCCPetr Vorel
This is needed due changes in commit 0519d1d0bf33 ("clk: qcom: gcc-msm8994: Modernize the driver"), which removed struct clk_fixed_factor. Preparation for next commit for enabling SD/eMMC. Inspired by 2c2f64ae36d9. This is required for both msm8994-huawei-angler (sdhc1 will be enabled in next commit) and msm8992-lg-bullhead (where actually fixes sdhc1 - tested on bullhead rev 1.01). Fixes: 0519d1d0bf33 ("clk: qcom: gcc-msm8994: Modernize the driver") Signed-off-by: Petr Vorel <petr.vorel@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220113233358.17972-4-petr.vorel@gmail.com
2022-01-31arm64: dts: qcom: sm8250: Fix MSI IRQ for PCIe1 and PCIe2Manivannan Sadhasivam
Fix the MSI IRQ used for PCIe instances 1 and 2. Cc: stable@vger.kernel.org Fixes: e53bdfc00977 ("arm64: dts: qcom: sm8250: Add PCIe support") Reported-by: Jordan Crouse <jordan@cosmicpenguin.net> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220112035556.5108-1-manivannan.sadhasivam@linaro.org
2022-01-31arm64: dts: qcom: sm8450: Update cpuidle states parametersMaulik Shah
This change updates/corrects below cpuidle parameters 1. entry-latency, exit-latency and residency for various idle states. 2. arm,psci-suspend-param which is same for CLUSTER_SLEEP_0/1 states. 3. Add CLUSTER_SLEEP_1 in CLUSTER_PD. Cc: devicetree@vger.kernel.org Fixes: 5188049c9b36 ("arm64: dts: qcom: Add base SM8450 DTSI") Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> [bjorn: Split domain-idle-states, per Ulf's request] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1641749107-31979-5-git-send-email-quic_mkshah@quicinc.com
2022-01-31arm64: dts: qcom: sm8350: Correct TCS configuration for apps rscMaulik Shah
Correct the TCS config by updating the number of TCSes for each type. Cc: devicetree@vger.kernel.org Fixes: b7e8f433a673 ("arm64: dts: qcom: Add basic devicetree support for SM8350 SoC") Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1641749107-31979-4-git-send-email-quic_mkshah@quicinc.com
2022-01-31arm64: dts: qcom: sm8250: Add cpuidle statesMaulik Shah
This change adds various idle states and add devices to power domains. Cc: devicetree@vger.kernel.org Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1641749107-31979-3-git-send-email-quic_mkshah@quicinc.com
2022-01-31arm64: dts: qcom: sm8150: Correct TCS configuration for apps rscMaulik Shah
Correct the TCS config by updating the number of TCSes for each type. Cc: devicetree@vger.kernel.org Fixes: d8cf9372b654 ("arm64: dts: qcom: sm8150: Add apps shared nodes") Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1641749107-31979-2-git-send-email-quic_mkshah@quicinc.com
2022-01-31arm64: dts: qcom: ipq8074: add the reserved-memory nodeKathiravan T
On IPQ8074, 4MB of memory is needed for TZ. So mark that region as reserved. Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com> [bjorn: Squash with existing reserved-memory node] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1641560078-860-1-git-send-email-quic_kathirav@quicinc.com
2022-01-31arm64: dts: qcom: ipq8074: add SMEM supportRobert Marko
IPQ8074 uses SMEM like other modern QCA SoC-s, so since its already supported by the kernel add the required DT nodes. Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220106212512.1970828-1-robimarko@gmail.com
2022-01-31arm64: dts: qcom: sm8150: Add support for LMh nodeThara Gopinath
Add LMh nodes for cpu cluster0 and cpu cluster1 for sm8150 SoC. Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220106173138.411097-3-thara.gopinath@linaro.org
2022-01-31arm64: dts: qcom: msm8916-j5: Fix typoPetr Vorel
Fixes: bd943653b10d ("arm64: dts: qcom: Add device tree for Samsung J5 2015 (samsung-j5)") Signed-off-by: Petr Vorel <petr.vorel@gmail.com> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211231213635.116324-1-petr.vorel@gmail.com
2022-01-31Revert "arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX"Marijn Suijten
This reverts commit c23f1b77358c173a25ef21303d2a8cc893e9ce22. The SM6125_VDDCX constant was replaced with 0 temporarily as the header patch defining this constant resided in a different branch, creating an unwanted dependency of the dts branch on the drivers branch. Now (by the time this patch will be applied) that both branches have been merged upstream, it is safe to revert to the constant again. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211229220117.293542-1-marijn.suijten@somainline.org
2022-01-31arm64: dts: qcom: msm8916: improve usb hs node formatingDavid Heidelberg
qcom,init-seq registers are in pairs Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211229193731.72690-1-david@ixit.cz
2022-01-31arm64: dts: qcom: sm7225-fairphone-fp4: Configure WLEDLuca Weiss
WLED is used for controlling the display backlight on this phone, so configure the node and enable it. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211229170358.2457006-5-luca.weiss@fairphone.com
2022-01-31arm64: dts: qcom: pm6150l: Add wled nodeLuca Weiss
WLED is used for controlling the backlight on some boards, add the node for it. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211229170358.2457006-4-luca.weiss@fairphone.com
2022-01-31arm64: dts: qcom: pms405: assign device specific compatibleDavid Heidelberg
Follow common pattern for this device, first specific and then generic compatible. Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211227215238.113956-1-david@ixit.cz
2022-01-31arm64: dts: qcom: ipq6018: add pcie max-link-speedBaruch Siach
Add the generic 'max-link-speed' property to describe the IPQ6018 PCIe link generation limit. This allows the generic dwc code to configure the link speed correctly. Signed-off-by: Baruch Siach <baruch.siach@siklu.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/fcf41277cf8529437374a5c10b2b1fcad30cd7c2.1640587131.git.baruch@tkos.co.il
2022-01-31arm64: dts: qcom: msm8996: SoC specific compatible strings for qcom-sdhciPetr Vorel
Signed-off-by: Petr Vorel <petr.vorel@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211223083153.22435-3-petr.vorel@gmail.com
2022-01-31arm64: dts: qcom: msm8994: SoC specific compatible strings for qcom-sdhciPetr Vorel
Signed-off-by: Petr Vorel <petr.vorel@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211223083153.22435-2-petr.vorel@gmail.com
2022-01-31arm64: dts: qcom: sm8250: add description of dcvsh interruptsVladimir Zapolskiy
The change adds SM8250 cpufreq-epss controller interrupts for each CPU core cluster. Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Cc: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211223075640.2924569-1-vladimir.zapolskiy@linaro.org
2022-01-31arm64: dts: qcom: sdm845: add missing power-controller compatibleDavid Heidelberg
dt-schema expect to have fallback compatible, which is now in-place. Fixes warning generated by `make qcom/sdm845-oneplus-fajita.dtb`: arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: power-controller@c300000: compatible: ['qcom,sdm845-aoss-qmp'] is too short From schema: Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml Signed-off-by: David Heidelberg <david@ixit.cz> Komu: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211220211443.106754-1-david@ixit.cz
2022-01-31arm64: dts: qcom: msm8996: qcom,controlled-remotely is booleanDavid Heidelberg
QCOM BAM parses property `qcom,controlled-remotely` as a boolean, adjust dts to reflect that. Discovered while converting text documentation into yaml format. Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211220145526.49102-1-david@ixit.cz
2022-01-31arm64: dts: qcom: msm8998: Fix cache nodesRob Herring
The msm8998 cache nodes have some issues. First, L1 caches are described within cpu nodes, not as separate nodes. The 'next-level-cache' property is of course in the correct location, otherwise the cache hierarchy walking would not work. Remove all the L1 cache nodes. Second, 'arm,arch-cache' is not a documented compatible string. "cache" is a sufficient compatible string for the Arm architected caches. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211217211136.3536443-1-robh@kernel.org
2022-01-31arm64: dts: qcom: sm8150: simplify references to pwrkey and resinFelipe Balbi
Since commit d0a6ce59ea4e ("arm64: dts: qcom: sm8150: Add support for SONY Xperia 1 / 5 (Kumano platform)"), we can directly refer to pwrkey and resin by their new labels, respectively pon_pwrkey and pon_resin. Simplify microsof surface duo DTS by utilizing the new labels. Signed-off-by: Felipe Balbi <felipe.balbi@microsoft.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211217124546.1192281-1-balbi@kernel.org
2022-01-31arm64: dts: qcom: sm8150: add i2c and spi dma channelsFelipe Balbi
By listing relevant DMA channels for the various QUPv3 instances, we can work on adding support for DMA to the respective drivers. Signed-off-by: Felipe Balbi <felipe.balbi@microsoft.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211216124348.370059-1-balbi@kernel.org
2022-01-31arm64: dts: qcom: sdm845: rename memory@ nodes to more descriptive namesDavid Heidelberg
Pure effort to avoid `make dtbs_check` warnings about memory@ nodes, which should have property device_type set to memory. Fixes warnings as: arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: memory@f5b00000: 'device_type' is a required property From schema: dtschema/schemas/memory.yaml Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211214234648.23369-1-david@ixit.cz
2022-01-31arm64: dts: qcom: sm8250: fix PCIe bindings to follow schemaDmitry Baryshkov
Replace (unused) enable-gpio binding with schema-defined wake-gpios. The GPIO line is still unused, but at least we'd follow the defined schema. While we are at it, change perst-gpio property to follow the preferred naming schema (perst-gpios). Fixes: 13e948a36db7 ("arm64: dts: qcom: sm8250: Commonize PCIe pins") Cc: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211214231448.2044987-1-dmitry.baryshkov@linaro.org
2022-01-31arm64: dts: qcom: apq8016-sbc: Fix dtbs_check warnings for &soundStephan Gerhold
qcom,apq8016-sbc-sndcard is now covered by the qcom,sm8250.yaml schema which has slightly different recommendations for the naming of properties and nodes. The old naming is still functional but deprecated. Update the &sound node in apq8016-sbc to fix the following dtbs_check warnings: apq8016-sbc.dt.yaml: sound@7702000: 'model' is a required property From schema: sound/qcom,sm8250.yaml apq8016-sbc.dt.yaml: sound@7702000: 'external-dai-link@0', ... do not match any of the regexes: '.*-dai-link$', ... From schema: sound/qcom,sm8250.yaml Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211214135124.2380-1-stephan@gerhold.net
2022-01-31arm64: dts: qcom: fix thermal zones namingDavid Heidelberg
Rename thermal zones according to dt-schema. Fixes multiple `make dtbs_check` warnings about name convetion. Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211214132750.69782-1-david@ixit.cz
2022-01-31arm64: dts: qcom: update qcom,domain propertyDavid Heidelberg
Since 'qcom,apr-domain' is deprecated in favor of 'qcom,domain', update accordingly. Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211214102451.29084-1-david@ixit.cz
generated by cgit (git 2.34.1) at 2025-07-15 08:10:11 +0000